FCD Series Three Phase External Power Line Filter for Frequency Converters UL Recognized FCD10 FCD Series The FCD filters provide three phase filtering for frequency inverters and variable speed motor drives. Designed for very noisy Delta applications, they attenuate conducted interference at low and high frequency ranges and protect programmable logic controllers from RF noise on the AC power line. These filters perform best when installed on the line side of the motor drive. The FCD filters prevent noise from returning to the line, enabling equipment to meet strict European regulations on RFI. Suited for field wiring applications, these filters are ideal for EMC troubleshooting and field refurbishing. The FCD filters feature side flanges for easy mounting and DIN type terminals which eliminate live metal parts, allowing safe and easy connection. They could also be sold as an accessory to motor drives marketed into Europe. Electrical Schematics 6 Amp Specifications Maximum leakage current, each line-to-ground @ 120 VAC 60 Hz: @ 250 VAC 50 Hz: Hipot rating (one minute): line-to-ground line-to-line 50/60 Hz Rated voltage: 440 VAC phase-to-phase 250 VAC phase-to-neutral/ground Rated current: 6FCD 16FCD 25FCD 36FCD 50FCD @ 440 VAC phase-to-phase 6 Amps 16 Amps 25 Amps 36 Amps 50 Amps Typical insertion loss in dB: Line-to-ground in 50 ohm circuit 6A 16A 25A 36A 50A Frequency-MHz .01 .03 .05 .1 .5 1 5 10 30 2 13 13 9 9 56 75 75 75 75 52 75 75 75 75 48 52 52 52 52 45 45 45 45 45 14 30 30 26 26 23 36 36 32 32 39 45 45 40 40 33 35 35 35 35 Line-to-line in 50 ohm circuit Current Rating CD 40 16, 25, 36, 50 Amps 5.7 mA 9.8 mA 2250 VDC 1450 VDC Operating frequency: Current Rating 16, 25, 36 & 50 Amps 6 Amps 2.9mA 4.9mA 6A 16A 25A 36A 50A Frequency-MHz .01 .03 .05 .1 9 9 9 9 9 8 13 13 13 13 24 24 26 26 26 40 55 55 46 46 .5 1 5 10 30 62 75 75 75 75 57 75 75 75 75 50 75 75 75 75 48 65 65 65 65 38 60 60 60 60 Resistor location for reference only. Libertyville, IL (847) 680-7400 Series Case Style Case Dimensions Metric shown in italics. Metric shown in italics. FCD FCD10 A Part No. (max) B (max) C (max) D E (max) F 6FCD10 6.0 152.4 4.3 109.2 2.3 58.4 3.74 95.0 5.15 128.3 2.756 70.0 16FCD10 7.20 182.9 5.48 139.2 2.55 64.8 4.92 5.94 124.97 150.9 2.756 70.0 25FCD10 9.69 6.3 246.13 160.0 2.52 64.0 5.7 8.46 4.528 144.78 215.0 115.01 36FCD10 9.69 6.3 246.13 160.0 2.52 64.0 5.7 8.46 4.528 144.78 215.0 115.01 50FCD10 9.69 6.3 246.13 160.0 2.52 64.0 5.7 8.46 4.528 144.78 215.0 115.01 Ordering Information Consult your local Corcom sales representative for pricing. Note: Terminals: No. 8-32 (2) 6FCD10, 16FCD10 Phoenix contact VDFK4 Accepts 10 AWG solid wire, 12 AWG stranded wire Torque Spec: 5.5 - 7.0 in.lb. Available Part Numbers 6FCD10 16FCD10 25FCD10 36FCD10 50FCD10 25FCD10, 36FCD10 Phoenix contact VDFK6 Accepts 8 AWG solid wire, 10 AWG stranded wire Torque Spec: 13.5 - 16 in.lb. 50FCD10 Phoenix contact HDFK10-VP Accepts 6 AWG solid wire, 8 AWG stranded wire Torque Spec: 13.5 - 16 in.lb. FCD 41 Libertyville, IL (847) 680-7400