7.6 mm (0.3 inch) Micro Bright Seven Segment Displays Technical Data Features * Available with Colon for Clock Display * Compact Package 0.300 x 0.500 inches Leads on 2.54 mm (0.1 inch) Centers * Choice of Colors AlGaAs Red, High Efficiency Red, Yellow, Green, Orange * Excellent Appearance Evenly Lighted Segments Mitered Corners on Segments Surface Color Gives Optimum Contrast 50 Viewing Angle * Design Flexibility Common Anode or Common Cathode HDSP-740x Series HDSP-750x Series HDSP-780x Series HDSP-A15x Series HDSP-A40x Series Right Hand Decimal Point 1. Overflow Character * Categorized for Luminous Intensity Yellow and Green Categorized for Color Use of Like Categories Yields a Uniform Display * High Light Output * High Peak Current * Excellent for Long Digit String Multiplexing * Intensity and Color Selection Available See Intensity and Color Selected Displays Data Sheet * Sunlight Viewable AlGaAs Description The 7.6 mm (0.3 inch) LED seven segment displays are designed for viewing distances up to 3 metres (10 feet). These devices use an industry standard size package and pinout. Both the numeric and Devices Orange HDSP- AlGaAs[1] HDSP- HER[1] HDSP- Yellow[1] HDSP- Green[1] HDSP- A401 A151 7501 7401 7801 Common Anode Right Hand Decimal A 7502 7402 7802 Common Anode Right Hand Decimal, Colon B 7503 7403 7803 Common Cathode Right Hand Decimal C 7504 7404 7804 Common Cathode Right Hand Decimal, Colon D A157 7507 7407 7807 Common Anode 1. Overflow E A158 7508 7408 7808 Common Cathode 1. Overflow F A403 A153 Description Package Drawing Note: 1. These displays are recommended for high ambient light operation. Please refer to the HDSP-A10X AlGaAs, HDSP-335X HER, HDSPA80X Yellow, and HDSP-A90X Green data sheet for low current operation. 2 1. overflow devices feature a right hand decimal point. All devices are available as either common anode or common cathode. These displays are ideal for most applications. Pin for pin equivalent displays are also available in a low current design. The low current displays are ideal for portable applications. For additional information see the Low Current Seven Segment Displays. Part Numbering System 5082 -X X X X-X X X X X HDSP-X X X X-X X X X X Mechanical Options[1] 00: No Mechanical Option Color Bin Options[1,2] 0: No Color Bin Limitation 3: Color Bins 3- and 3+ only (applicable for Yellow devices only) Z: Color Bins 2- and 3+ only (applicable for Yellow devices only) Maximum Intensity Bin[1,2] 0: No Maximum Intensity Bin Limitation Minimum Intensity Bin[1,2] 0: No Minimum Intensity Bin Limitation Device Configuration/Color [1] 1: Common Anode 2: Common Anode 3: Common Cathode 4: Common Cathode Device Specific Configuration[1] Refer to Respective Datasheet Package[1] A: 7.6 mm (0.3 inch) Single Digit Seven Segment Display Notes: 1. For codes not listed in the figure above, please refer to the respective datasheet or contact your nearest Agilent representative for details. 2. Bin options refer to shippable bins for a part number. Color and Intensity Bins are typically restricted to 1 bin per tube (exceptions may apply). Please refer to respective datasheet for specific bin limit information. 3 Package Dimensions NOTES: 1. ALL DIMENSIONS IN MILLIMETRES (INCHES). 2. MAXIMUM. 3. ALL UNTOLERANCED DIMENSIONS ARE FOR REFERENCE ONLY. 4. REDUNDANT ANODES. 5. REDUNDANT CATHODES. 6. FOR HDSP-7400/-7800 SERIES PRODUCT ONLY. Internal Circuit Diagram A B C D E F 4 Absolute Maximum Ratings AlGaAs Red HDSP-A150 Series Description Average Power per Segment or DP HER/Orange Yellow HDSP-7500/-A40X HDSP-7400 Series Series Green HDSP-7800 Series Units 96 105 80 105 mW Peak Forward Current per Segment or DP 160[1] 90[3] 60[5] 90[7] mA DC Forward Current per Segment or DP 40[2] 30[4] 20[6] 30[8] mA Operating Temperature Range -20 to +100[9] C -40 to +100 Storage Temperature Range C -55 to +100 Reverse Voltage per Segment or DP 3.0 V Lead Solder Temperature for 3 Seconds (1.59 mm [0.063 in.] below seating plane) 260 C Notes: 1. See Figure 1 to establish pulsed conditions. 2. Derate above 46C at 0.54 mA/C. 3. See Figure 6 to establish pulsed conditions. 4. Derate above 53C at 0.45 mA/C. 5. See Figure 7 to establish pulsed conditions. 6. Derate above 81C at 0.52 mA/C. 7. See Figure 8 to establish pulsed conditions. 8. Derate above 39C at 0.37 mA/C. 9. For operation below -20C, contact your local Agilent components sales office or an authorized distributor. Electrical/Optical Characteristics at TA = 25C AlGaAs Red Device Series HDSP- Parameter Symbol Min. Typ. Luminous Intensity/Segment[1,2,5] (Digit Average) IV 6.9 14.0 mcd IF = 20 mA 1.8 V IF = 20 mA Forward Voltage/Segment or DP VF V IF = 100 mA 2.0 A15x Max. 3.0 Units PEAK 645 nm Dominant Wavelength[3] d 637 nm Reverse Voltage/Segment or DP [4] VR 15.0 V Peak Wavelength 3.0 Temperature Coefficient of VF /Segment or DP VF /C -2 mV/C Thermal Resistance LED Junctionto-Pin R J-PIN 255 C/W/Seg Test Conditions IR = 100 A 5 High Efficiency Red Device Series HDSP- Parameter Symbol Intensity/Segment[1,2,6] Luminous (Digit Average) Min. Typ. 360 980 Max. Units cd IV 5390 750x 2.0 PEAK 635 nm Dominant Wavelength[3] d 626 nm Reverse Voltage/Segment or DP[4] VR 30 V Peak Wavelength 3.0 IF = 5 mA IF = 20 mA VF Forward Voltage/Segment or DP Test Conditions 2.5 V Temperature Coefficient of VF /Segment or DP VF /C -2 mV/C Thermal Resistance LED Junctionto-Pin RJ-PIN 200 C/W/Seg IF = 20 mA IR = 100 A Orange Device Series HDSP- A40x Parameter Symbol Min. Typ. Max. Units Luminous Intensity/Segment[1,2,6] (Digit Average) IV 0.70 Forward Voltage/Segment or DP VF 2.0 PEAK 600 nm d 603 nm 30 V Peak Wavelength Dominant Wavelength[3] Reverse Voltage/Segment or DP[4] VR 3.0 2.5 Test Conditions mcd IF = 5 mA V IF = 20 mA Temperature Coefficient of VF /Segment or DP VF /C -2 mV/C Thermal Resistance LED Junctionto-Pin RJ-PIN 200 C/W/Seg IR = 100 A 6 Yellow Device Series HDSP- Parameter Symbol Luminous Intensity/Segment[1,2,7] (Digit Average) Min. Typ. 225 480 Max. Units cd IV 2740 Forward Voltage/Segment or DP 740x Peak Wavelength VF 2.2 PEAK 583 Test Conditions IF = 5 mA IF = 20 mA 2.5 V IF = 20 mA nm Dominant Wavelength[3,9] d 581.5 586 Reverse Voltage/Segment or DP[4] VR 3.0 50.0 V 592.5 nm Temperature Coefficient of VF /Segment or DP VF /C -2 mV/C Thermal Resistance LED Junctionto-Pin RJ-PIN 200 C/W/Seg IR = 100 A High Performance Green Device Series HDSP- Parameter Symbol Luminous Intensity/Segment[1,2,8] (Digit Average) Min. Typ. 860 3000 Max. Units cd IV 6800 Forward Voltage/Segment or DP 780x Peak Wavelength Dominant Wavelength[3,9] Reverse Voltage/Segment or DP[4] VF 2.1 PEAK 566 d 571 VR 3.0 Test Conditions IF = 10 mA IF = 20 mA 2.5 V IF = 10 mA nm 577 nm 50.0 V Temperature Coefficient of VF /Segment or DP VF /C -2 mV/C Thermal Resistance LED Junctionto-Pin RJ-PIN 200 C/W/Seg IR = 100 A Notes: 1. Case temperature of device immediately prior to the intensity measurement is 25C. 2. The digits are categorized for luminous intensity. The intensity category is designated by a letter on the side of the package. 3. The dominant wavelength, d, is derived from the CIE chromaticity diagram and is that single wavelength which defines the color of the device. 4. Typical specification for reference only. Do not exceed absolute maximum ratings. 5. For low current operation the AlGaAs HDSP-A101 series displays are recommended. 6. For low current operation the HER HDSP-7511 series displays are recommended. 7. For low current operation the Yellow HDSP-A801 series displays are recommended. 8. For low current operation the Green HDSP-A901 series displays are recommended. 9. The yellow (HDSP-7400) and Green (HDSP-7800) displays are categorized for dominant wavelength. The category is designated by a number adjacent to the luminous intensity category letter. 7 100 OPERATION IN THIS REGION REQUIRES TEMPERATURE OPERATING OF I DC MAXIMUM 10 z 0H 10 z 0H 30 Hz 1K Hz 3K K 10 HZ I F PEAK RATIO OF MAXIMUM OPERATING PEAK CURRENT TO TEMPERATURE I DC MAX DERATED MAXIMUM DC CURRENT AlGaAs Red 1 1 10 100 1000 10000 DC OPERATION t P - PULSE DURATION - s IF - FORWARD CURRENT PER SEGMENT - mA Figure 1. Maximum Allowed Peak Current vs. Pulse Duration - AlGaAs Red. IDC MAX. - MAXIMUM DC CURRENT PER SEGMENT - mA 50 RJ-A = 770C/W 45 AlGaAs RED 40 35 30 25 20 15 10 5 0 20 30 40 50 60 70 80 90 100 110 120 160 140 120 AlGaAs RED 100 80 60 40 20 0 0 PEAK - NORMALIZED RELATIVE EFFICIENCY RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 20 mA) 2.00 1.75 AlGaAs RED 1.50 1.25 1.00 0.75 0.50 0.25 5 10 15 20 25 30 35 40 IF - FORWARD CURRENT PER SEGMENT - mA Figure 4. Relative Luminous Intensity vs. DC Forward Current. 1.5 2.0 2.5 3.0 3.5 4.0 Figure 3. Forward Current vs. Forward Voltage. Figure 2. Maximum Allowable DC Current per Segment as a Function of Ambient Temperature. 0 1.0 VF - FORWARD CURRENT - V TA - AMBIENT TEMPERATURE - C 0 0.5 1.4 1.2 1.0 AlGaAs RED 0.8 0.6 0.5 5.0 50.0 150.0 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 5. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. 8 OPERATION IN THIS REGION REQUIRES TEMPERATURE OPERATING OF I DC MAXIMUM 10 IDC MAX - MAXIMUM DC CURRENT PER SEGMENT - mA 10000 40 35 30 25 60 YELLOW 40 HER / ORANGE 20 GREEN Figure 10. Forward Current vs. Forward Voltage Characteristics. 5.0 HER, ORANGE GREEN 20 YELLOW 15 10 5 40 50 60 70 80 90 100 110 120 Figure 9. Maximum Allowable DC Current per Segment as a Function of Ambient Temperature. 12 10 HER / ORANGE 8 YELLOW 6 4 GREEN 2 0 0 5 10 15 20 25 30 IF - FORWARD CURRENT PER SEGMENT - mA Figure 11. Relative Luminous Intensity vs. DC Forward Current. PEAK - RELATIVE EFFICIENCY (NORMALIZED TO 1 AT 5 mA FOR HER, ORANGE AND YELLOW, AND 10 mA FOR GREEN) 80 R = 770C/W J-A TA - AMBIENT TEMPERATURE - C RELATIVE LUMINOUS INTENSITY (NORMALIZED TO 1 AT 5 mA FOR HER AND )t (YELLOW AND TO 1 AT 10 mA FOR GREEN) IF - FORWARD CURRENT PER SEGMENT - mA 100 VF - FORWARD VOLTAGE - V 10000 z z H H I F PEAK RATIO OF MAXIMUM OPERATING I DC MAX PEAK CURRENT TO TEMPERATURE DERATED DC CURRENT 0 z Z 1000 4.0 1000 45 0 20 30 DC OPERATION 3.0 z 10 0 z H K H H K K 30 1 3 10 1 2.0 Z H 0 10 Hz 10 1.0 H 50 OPERATION IN THIS REGION REQUIRES TEMPERATURE OPERATING OF I DC MAXIMUM Figure 8. Allowable Peak Current vs. Pulse Duration - Green. 0 100 Figure 7. Maximum Tolerable Peak Current vs. Pulse Duration - Yellow. t P - PULSE DURATION - s 0 0 10 t P - PULSE DURATION - s 100 100 K DC OPERATION 1 Figure 6. Maximum Tolerable Peak Current vs. Pulse Duration - HER, Orange. 10 30 1 10000 t P - PULSE DURATION - s 1 1 z 1000 z 100 H 10 H DC OPERATION 1 K z K H 10 3 0 OPERATION IN THIS REGION REQUIRES TEMPERATURE OPERATING OF I DC MAXIMUM 0 Z KH 1 Hz 0 30 Hz 1K Hz 3K 10 100 10 I F PEAK RATIO OF MAXIMUM OPERATING I DC MAX PEAK CURRENT TO TEMPERATURE DERATED DC CURRENT 100 10 I F PEAK RATIO OF MAXIMUM OPERATING PEAK CURRENT TO TEMPERATURE I DC MAX DERATED DC CURRENT HER, Yellow, Green, Orange 1.8 YELLOW 1.6 HER / ORANGE 1.4 GREEN 1.2 1.0 0.8 0 20 40 60 80 100 IPEAK - PEAK FORWARD CURRENT PER SEGMENT - mA Figure 12. Relative Efficiency (Luminous Intensity per Unit Current) vs. Peak Current. 9 Intensity Bin Limits (mcd) AlGaAs Red HDSP-A15x IV Bin Category Min. M 7.07 N 10.60 O 15.90 P 23.90 Q 35.80 Yellow Max. 13.00 19.40 29.20 43.80 65.60 HER HDSP-750x Min. 0.342 0.516 0.774 1.160 1.740 2.610 3.915 Max. 0.630 0.946 1.418 2.127 3.190 4.785 7.177 HDSP-A40X IV Bin Category Min. A 0.284 B 0.354 C 0.443 D 0.554 E 0.692 F 0.856 G 1.082 H 1.352 I 1.692 J 2.114 K 2.641 L 3.300 M 4.127 N 5.157 Max. 0.433 0.541 0.677 0.846 1.057 1.322 1.652 2.066 2.581 3.227 4.034 5.042 6.303 7.878 IV Bin Category B C D E F G H Orange HDSP-740x IV Bin Category Min. B 0.229 C 0.317 D 0.476 E 0.714 F 1.073 G 1.609 H 2.413 Max. 0.387 0.582 0.872 1.311 1.967 2.950 4.425 Green IV Bin Category H I J K L HDSP-780x Min. 0.86 1.29 1.94 2.90 4.37 Max. 1.58 2.37 3.55 5.33 8.01 10 Color Categories Color Yellow Green Bin 1 3 2 4 2 3 4 5 Dominant Wavelength (nm) Min. Max. 581.50 585.00 584.00 587.50 586.50 590.00 589.00 592.50 573.00 577.00 570.00 574.00 567.00 571.00 564.00 568.00 Note: All categories are established for classification of products. Products may not be available in all categories. Please contact your Agilent representatives for further clarification/information. Contrast Enhancement For information on contrast enhancement, please see Application Note 1015. Soldering/Cleaning Cleaning agents from the ketone family (acetone, methyl ethyl ketone, etc.) and from the chlorinated hydrocarbon family (methylene chloride, trichloroethylene, carbon tetrachloride, etc.) are not recommended for cleaning LED parts. All of these various solvents attack or dissolve the encapsulating epoxies used to form the package of plastic LED parts. For further information on soldering LEDs, please refer to Application Note 1027. www.agilent.com/semiconductors For product information and a complete list of distributors, please go to our web site. For technical assistance call: Americas/Canada: +1 (800) 235-0312 or (408) 654-8675 Europe: +49 (0) 6441 92460 China: 10800 650 0017 Hong Kong: (+65) 271 2451 India, Australia, New Zealand: (+65) 271 2394 Japan: (+81 3) 3335-8152(Domestic/International), or 0120-61-1280(Domestic Only) Korea: (+65) 271 2194 Malaysia, Singapore: (+65) 271 2054 Taiwan: (+65) 271 2654 Data subject to change. Copyright (c) 2002 Agilent Technologies, Inc. Obsoletes 5988-0382EN February 11, 2002 5988-4434EN