PT5020 Series Positive Input/Negative Output Integrated Switching Regulator SLTS025B (Revised 12/19/2001) Features Description * Negative Output * Input Voltage Range: +4.75 to +7 Volts * Laser-Trimmed * Small Footprint * Soft Start * 5-Pin Mount Option (Suffixes L & M) The PT5020 series of integrated switching regulators (ISRs) convert a positive input voltage, typically +5V, to a negative output voltage for a wide range of analog and datacom applications. These Plus to Minus ISRs incorporate a "Buck-Boost" topology and are packaged in the 3-pin, single in-line pin (SIP) package configuration. Pin-Out Information Pin 1 Standard Application +V in 1 PT5020 -V out 3 2 C1 Function Vin 2 GND 3 Vout C2 100F + COM COM C1 = Optional ceramic (1-5F) C2 = Required Electrolytic (100F) Ordering Information PT5021 o = -3.3 Volts PT5022 o = -5 Volts PT5023 o = -9 Volts PT5024 o = -12 Volts PT5025 o = -15 Volts PT5026 o = -5.2 Volts PT5027 o = -8.0 Volts PT5028 o = -6.5 Volts PT5029 o = -5.5 Volts PT5030 o = -6.0 Volts PT5031 o = -1.7 Volts PT Series Suffix (PT1234x ) Case/Pin Configuration Vertical Horizontal SMD Horizontal, 2-pin Tab SMD, 2-Pin Tab Order Suffix Package Code * N A C M L (EAD) (EAA) (EAC) (EAM) (EAL) * Previously known as package styles 100/110. (Reference the applicable package code drawing for the dimensions and PC board layout) NOTE: PT5020 ISRs are not Short-Circuit Protected. Specifications (Unless otherwise stated, T a =25C, Vin =5V, I o =Iomax, C2 =100F) PT5020 SERIES Characteristics Output Current Symbol Io Conditions Over Vin range Min Vo= -1.7V to -6.5V Vo= -9V Vo= -12V Vo= -15V Typ Max Units 0.25 (1) 0.10 (1) 0.10 (1) 0.10 (1) -- -- -- -- 1.0 0.60 0.50 0.30 A 4.75 -- 7 (2) V Input Voltage Range Vin Over Io range Output Voltage Tolerance Vo Over Vin Range Ta = -20C to SOA limit (3) -- 1.5 3 %Vo Line Regulation Regline Over Vin range -- 0.5 1 %Vo Load Regulation Regload Iomin Io Iomax -- 0.5 1 %Vo Efficiency Io =0.5 Iomax -- 75 -- % Vo Ripple (pk-pk) Vr 20MHz bandwidth -- 2 5 %Vo Transient Response ttr 25% load change Vo over/undershoot -- -- 500 3.0 -- 5.0 Sec %Vo Current Limit Ilim -- 150 -- %Iomax Inrush Current Iir tir On start up -- -- 1.0 (3) 1.0 -- -- A mSec Switching Frequency s Over Io range 0.8 500 1 650 1.2 800 MHz kHz Operating Temperature Range Ta -- -20 -- +85 (4) C Thermal Resistance ja Free Air Convection (40-60LFM) -- 50 -- C/W Storage Temperature Ts -40 -- +125 C Vo =1.7 to 8V Vo 8 V Mechanical Shock Per Mil-STD-883D, Method 2002.3 1 msec, Half Sine, mounted to a fixture -- 500 -- G's Mechanical Vibration Per Mil-STD-883D, 20-2000 Hz Suffixes N, A, & C Suffixes L & M -- -- 5 20 -- -- G's Weight Suffixes N, A, & C Suffixes L & M -- -- 4.5 6.5 (5) -- -- grams Notes: (1) (2) (3) (4) (5) The ISR will operate at no load with reduced specifications. For applications with input voltages greater than 7 VDC, use the PT78NR100 Series. The inrush current stated is above the normal input current for the associated output load. See Safe Operating Area curves or consult the factory for the appropriate derating The tab pins on the 5-pin mount package types (suffixes L & M) must be soldered. For more information see the applicable package outline drawing. For technical support and more information, see inside back cover or visit www.ti.com Typical Characteristics PT5020 Series Positive Input/Negative Output Integrated Switching Regulator PT5024 (-12VDC) PT5022 (-5VDC) (See Note A) Efficiency vs Output Current Efficiency vs Output Current 100 10 0 90 90 Vin Efficiency - % Efficiency - % (See Note A) 7.0V 6.5V 6.0V 5.5V 5.0V 4.75V 80 70 60 V in 80 7.0 V 6.5 V 6.0 V 5.5 V 5.0 V 4.7 5V 70 60 50 50 40 40 0 0 .1 0 .2 0 .3 0 .4 0 .5 0 0 .2 Iout-(Amps) 0 .4 0 .6 0 .8 1 Iout-(Amps) Ripple Voltage vs Output Current Ripple Voltage vs Output Current 10 0 160 140 V in 4 .7 5 V 5 .0 V 5 .5 V 6 .0 V 6 .5 V 7 .0 V 100 80 60 Ripple-(mV) Ripple-(mV) 80 120 40 Vin 4 .7 5V 5 .0 V 5 .5 V 6 .0 V 6 .5 V 7 .0 V 60 40 20 20 0 0 0 0.1 0.2 0.3 0.4 0 0.5 0.2 Iout-(Amps) Power Dissipation vs Output Current 0.6 0.8 1 Power Dissipation vs Output Current 2 2.5 1.5 2 Vin 4.75V 5.0V 5.5V 6.0V 6.5V 7.0V 1 PD-(Watts) PD-(Watts) 0.4 Iout-(Amps) Vin 4.75V 5.0V 5.5V 6.0V 6.5V 7.0V 1.5 1 0.5 0.5 0 0 0 0.1 0.2 0.3 0.4 0.5 0 0.2 Iout-(Amps) Safe Operating Area (VIN=5V) (See Note B) 0.6 0.8 1 Safe Operating Area (VIN=5V) (See Note B) 90 90 80 80 70 60 A i rfl o w 50 90 LFM 60 LFM 40 0 LFM 30 Ambient Temperature - (C) Ambient Temperature - (C) 0.4 Iout-(Amps) 70 Airflow 60 0 LFM 50 60 LFM 40 90 LFM 30 20 20 0 .0 0 .1 0 .2 0 .3 Maximum Output Current - (Amps) 0 .4 0 .5 0 0.2 0.4 0.6 0.8 1 Maximum Output Current - (Amps) Note A: Characteristic data has been developed from actual products tested at 25C. This data is considered typical data for the Converter. Note B: Thermal derating graphs are developed in free-air convection cooling, which corresponds to approximately 40-60LFM of airflow. For technical support and more information, see inside back cover or visit www.ti.com PACKAGE OPTION ADDENDUM www.ti.com 28-Aug-2012 PACKAGING INFORMATION Orderable Device PT5021C PT5021J Status (1) NRND Package Type Package Drawing Pins Package Qty 35 SIP MODULE EAC 3 OBSOLETE SIP MODULE EAJ 3 Eco Plan (2) Lead/ Ball Finish MSL Peak Temp Call TI Level-1-215C-UNLIM TBD Call TI Call TI NRND SIP MODULE EAD 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5022A NRND SIP MODULE EAA 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5022C NRND SIP MODULE EAC 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5022H NRND SIP MODULE EAH 3 16 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5022L NRND SIP MODULE EAL 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5022M NRND SIP MODULE EAM 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5022N NRND SIP MODULE EAD 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type OBSOLETE SIP MODULE EAA 3 TBD Call TI Call TI PT5023C NRND SIP MODULE EAC 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5024A NRND SIP MODULE EAA 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5024C NRND SIP MODULE EAC 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5024L NRND SIP MODULE EAL 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5024M NRND SIP MODULE EAM 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5024N NRND SIP MODULE EAD 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5025A NRND SIP MODULE EAA 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5025C NRND SIP MODULE EAC 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5025L NRND SIP MODULE EAL 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5025N NRND SIP MODULE EAD 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5026A NRND SIP MODULE EAA 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5026C NRND SIP MODULE EAC 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5026H NRND SIP MODULE EAH 3 16 Pb-Free (RoHS) Call TI N / A for Pkg Type NRND SIP MODULE EAL 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM OBSOLETE SIP MODULE EAL 3 TBD Call TI Call TI PT5026L PT5026LT PT5026M PT5026N PT5027A NRND SIP MODULE EAM 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type NRND SIP MODULE EAD 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type OBSOLETE SIP MODULE EAA 3 TBD Call TI Call TI PT5027C NRND SIP MODULE EAC 3 35 Pb-Free (RoHS) Call TI Level-1-215C-UNLIM PT5029A NRND SIP MODULE EAA 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type Addendum-Page 1 Samples (Requires Login) Pb-Free (RoHS) PT5021N PT5023A (3) PACKAGE OPTION ADDENDUM www.ti.com 28-Aug-2012 Orderable Device Status (1) Package Type Package Drawing PT5029M NRND SIP MODULE Pins Package Qty Eco Plan (2) Lead/ Ball Finish MSL Peak Temp (3) Samples (Requires Login) EAM 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5030A NRND SIP MODULE EAA 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5030N NRND SIP MODULE EAD 3 35 Pb-Free (RoHS) Call TI N / A for Pkg Type PT5031L NRND SIP MODULE EAL 3 35 TBD Call TI Level-1-215C-UNLIM (1) The marketing status values are defined as follows: ACTIVE: Product device recommended for new designs. LIFEBUY: TI has announced that the device will be discontinued, and a lifetime-buy period is in effect. NRND: Not recommended for new designs. Device is in production to support existing customers, but TI does not recommend using this part in a new design. PREVIEW: Device has been announced but is not in production. Samples may or may not be available. OBSOLETE: TI has discontinued the production of the device. (2) Eco Plan - The planned eco-friendly classification: Pb-Free (RoHS), Pb-Free (RoHS Exempt), or Green (RoHS & no Sb/Br) - please check http://www.ti.com/productcontent for the latest availability information and additional product content details. TBD: The Pb-Free/Green conversion plan has not been defined. Pb-Free (RoHS): TI's terms "Lead-Free" or "Pb-Free" mean semiconductor products that are compatible with the current RoHS requirements for all 6 substances, including the requirement that lead not exceed 0.1% by weight in homogeneous materials. Where designed to be soldered at high temperatures, TI Pb-Free products are suitable for use in specified lead-free processes. Pb-Free (RoHS Exempt): This component has a RoHS exemption for either 1) lead-based flip-chip solder bumps used between the die and package, or 2) lead-based die adhesive used between the die and leadframe. The component is otherwise considered Pb-Free (RoHS compatible) as defined above. Green (RoHS & no Sb/Br): TI defines "Green" to mean Pb-Free (RoHS compatible), and free of Bromine (Br) and Antimony (Sb) based flame retardants (Br or Sb do not exceed 0.1% by weight in homogeneous material) (3) MSL, Peak Temp. -- The Moisture Sensitivity Level rating according to the JEDEC industry standard classifications, and peak solder temperature. Important Information and Disclaimer:The information provided on this page represents TI's knowledge and belief as of the date that it is provided. TI bases its knowledge and belief on information provided by third parties, and makes no representation or warranty as to the accuracy of such information. Efforts are underway to better integrate information from third parties. TI has taken and continues to take reasonable steps to provide representative and accurate information but may not have conducted destructive testing or chemical analysis on incoming materials and chemicals. TI and TI suppliers consider certain information to be proprietary, and thus CAS numbers and other limited information may not be available for release. In no event shall TI's liability arising out of such information exceed the total purchase price of the TI part(s) at issue in this document sold by TI to Customer on an annual basis. Addendum-Page 2 IMPORTANT NOTICE Texas Instruments Incorporated and its subsidiaries (TI) reserve the right to make corrections, enhancements, improvements and other changes to its semiconductor products and services per JESD46, latest issue, and to discontinue any product or service per JESD48, latest issue. Buyers should obtain the latest relevant information before placing orders and should verify that such information is current and complete. All semiconductor products (also referred to herein as "components") are sold subject to TI's terms and conditions of sale supplied at the time of order acknowledgment. TI warrants performance of its components to the specifications applicable at the time of sale, in accordance with the warranty in TI's terms and conditions of sale of semiconductor products. Testing and other quality control techniques are used to the extent TI deems necessary to support this warranty. Except where mandated by applicable law, testing of all parameters of each component is not necessarily performed. TI assumes no liability for applications assistance or the design of Buyers' products. Buyers are responsible for their products and applications using TI components. To minimize the risks associated with Buyers' products and applications, Buyers should provide adequate design and operating safeguards. TI does not warrant or represent that any license, either express or implied, is granted under any patent right, copyright, mask work right, or other intellectual property right relating to any combination, machine, or process in which TI components or services are used. Information published by TI regarding third-party products or services does not constitute a license to use such products or services or a warranty or endorsement thereof. Use of such information may require a license from a third party under the patents or other intellectual property of the third party, or a license from TI under the patents or other intellectual property of TI. Reproduction of significant portions of TI information in TI data books or data sheets is permissible only if reproduction is without alteration and is accompanied by all associated warranties, conditions, limitations, and notices. TI is not responsible or liable for such altered documentation. Information of third parties may be subject to additional restrictions. Resale of TI components or services with statements different from or beyond the parameters stated by TI for that component or service voids all express and any implied warranties for the associated TI component or service and is an unfair and deceptive business practice. TI is not responsible or liable for any such statements. Buyer acknowledges and agrees that it is solely responsible for compliance with all legal, regulatory and safety-related requirements concerning its products, and any use of TI components in its applications, notwithstanding any applications-related information or support that may be provided by TI. Buyer represents and agrees that it has all the necessary expertise to create and implement safeguards which anticipate dangerous consequences of failures, monitor failures and their consequences, lessen the likelihood of failures that might cause harm and take appropriate remedial actions. Buyer will fully indemnify TI and its representatives against any damages arising out of the use of any TI components in safety-critical applications. In some cases, TI components may be promoted specifically to facilitate safety-related applications. With such components, TI's goal is to help enable customers to design and create their own end-product solutions that meet applicable functional safety standards and requirements. Nonetheless, such components are subject to these terms. No TI components are authorized for use in FDA Class III (or similar life-critical medical equipment) unless authorized officers of the parties have executed a special agreement specifically governing such use. Only those TI components which TI has specifically designated as military grade or "enhanced plastic" are designed and intended for use in military/aerospace applications or environments. Buyer acknowledges and agrees that any military or aerospace use of TI components which have not been so designated is solely at the Buyer's risk, and that Buyer is solely responsible for compliance with all legal and regulatory requirements in connection with such use. TI has specifically designated certain components which meet ISO/TS16949 requirements, mainly for automotive use. Components which have not been so designated are neither designed nor intended for automotive use; and TI will not be responsible for any failure of such components to meet such requirements. Products Applications Audio www.ti.com/audio Automotive and Transportation www.ti.com/automotive Amplifiers amplifier.ti.com Communications and Telecom www.ti.com/communications Data Converters dataconverter.ti.com Computers and Peripherals www.ti.com/computers DLP(R) Products www.dlp.com Consumer Electronics www.ti.com/consumer-apps DSP dsp.ti.com Energy and Lighting www.ti.com/energy Clocks and Timers www.ti.com/clocks Industrial www.ti.com/industrial Interface interface.ti.com Medical www.ti.com/medical Logic logic.ti.com Security www.ti.com/security Power Mgmt power.ti.com Space, Avionics and Defense www.ti.com/space-avionics-defense Microcontrollers microcontroller.ti.com Video and Imaging www.ti.com/video RFID www.ti-rfid.com OMAP Applications Processors www.ti.com/omap TI E2E Community e2e.ti.com Wireless Connectivity www.ti.com/wirelessconnectivity Mailing Address: Texas Instruments, Post Office Box 655303, Dallas, Texas 75265 Copyright (c) 2012, Texas Instruments Incorporated