PL IA NT Features CO M Carbon element *R oH S Ganging up to 8 sections available Knurled and flatted shaft styles Audio taper option Tracking error within 3 dB RoHS compliant* PTD90 Series - 9 mm Multi-Ganged Potentiometer Electrical Characteristics Standard Resistance Range ....................... 1 K ohms to 1 M ohms Total Resistance Tolerance .................................10 % or 20 % Standard Tapers ................Linear & audio Maximum Operating Voltage ............................... 150 VAC, 20 VDC Rated Power Linear Taper .......................0.05 watts Audio Taper ......................0.025 watts Noise .................................. 100 mV max. Insulation Resistance @ 250 VDC ....................................... 100 M ohms Dielectric Withstanding Voltage ..............................................300 VAC End Resistance .................20 ohms max. Tracking Error (-40 dB to 0 dB).......3 dB Product Dimensions PTD901 PTD902 M7XP0.75 R1 Mechanical Characteristics Mechanical Angle ...................300 10 Running Torque ...............10 to 250 g-cm Stop Strength .......................... 4.0 kg-cm Shaft Push/Pull Strength .......5.0 kgf min. Shaft Wobble .....0.6 x L/20 mm p-p max. Mounting Torque ............. 7.0 kg-cm min. Soldering Condition Manual Soldering ........96.5 Sn/3.0 Ag/0.5 Cu solid wire or no-clean rosin cored wire 270 C max. for 3 seconds Wave Soldering ............. 96.5 Sn/3.0 Ag/0.5 Cu solder with no-clean flux 260 C max. for 5 seconds Wash Process ...... Not recommended Mounting Hardware ........ One flat washer and one mounting nut supplied per potentiometer M7XP0.75 0.8 0.2 (.014 .007) 5.0 (.197) R2 R1 2.5 (.098) RECOMMENDED PCB LAYOUT 5.0 (.197) DIA. HOLES 3 PLCS. 1.0 +0.2/-0 (.039 +.008/-0) 3 2 Environmental Characteristics Operating Temperature .................................-10 C to +50 C Rotational Life ................... 15,000 cycles IP Rating .......................................... IP 40 9.65 0.5 (.380 .020) 7.05 0.5 (.278 .020) MOUNTING SURFACE 1 5.0 (.197) SCHEMATIC R1 1 0.8 0.2 (.014 .007) 5.0 (.197) RECOMMENDED PCB LAYOUT DIA. HOLES 6 PLCS. 1.0 +0.2/-0 (.039 +.008/-0) 5.0 (.197) 3 3 2 2 1 1 MOUNTING SURFACE R1 5.0 (.197) 2 R2 R1 3 SCHEMATIC 2.5 (.098) 2 R1 1 3 R2 1' 3' 2' DIMENSIONS: MM (INCHES) Rating Power Ratio (%) Derating Curve 100 80 60 40 33 20 0 0 10 20 30 40 50 60 70 80 90 100 Ambient Temperature (C) *RoHS Directive 2002/95/EC Jan 27 2003 including Annex Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Applications Audio/TV sets Automotive sound systems Amplifiers/mixers/drum machines/synthesizers/DJ equipment Multimedia sound systems Portable electronics PTD90 Series - 9 mm Multi-Ganged Potentiometer Product Dimensions PTD904 PTD906 PTD908 17.2 0.5 (.677 .020) 24.7 0.5 (.972 .020) M7XP0.75 M7XP0.75 R4 R3 R2 R1 2.5 (.098) 3 3 3 2 2 2 2 5.0 (.197) R4 R3 1 5.0 (.197) 2.5 (.098) 1 3 DIA. HOLES 2.5 12 PLCS. (.098) 1.0 +0.2/-0 (.039 +.008/-0) 3 3 5.0 (.197) 2.5 (.098) 3 3 3 3 1 R3 2 2 2 2 1 1 1 1 1 5.0 R6 R5 (.197) R4 R3 MOUNTING SURFACE R2 R1 2.5 (.098) 2.5 (.098) 5.0 (.197) 5.0 (.197) 2.5 (.098) DIA. HOLES 18 PLCS. 1.0 +0.2/-0 (.039 +.008/-0) 3 3 3 3 3 2 2 2 2 5.0 (.197) 3 3 3 3 3 3 3 2 2 2 2 2 2 2 2 1 1 1 1 1 1 1 1 R4 R3 R6 R5 2.5 (.098) 2 5.0 (.197) 3 5.0 R8 R7 (.197) 2 1 R2 2.5 (.098) 5.0 (.197) 3 2 2 1 R4 M7XP0.75 0.8 0.2 (.014 .007) 5.0 (.197) 5.0 (.197) RECOMMENDED PCB LAYOUT 5.0 (.197) 1 3 2 R2 R1 2.5 (.098) 2.5 (.098) 2 3 2 R4 R3 5.0 (.197) SCHEMATIC 2 R6 R5 5.0 (.197) 5.0 (.197) 5.0 (.197) SCHEMATIC 3 2.5 (.098) R8 R7 0.8 0.2 (.014 .007) RECOMMENDED PCB LAYOUT MOUNTING SURFACE R2 R1 2.5 (.098) R2 R1 5.0 (.197) 5.0 (.197) 3 1 R4 R3 2.5 (.098) RECOMMENDED PCB LAYOUT 5.0 (.197) 1 R6 R5 0.8 0.2 (.014 .007) 5.0 (.197) 2.5 (.098) 32.2 0.5 (1.268 .020) 2.5 (.098) 2.5 (.098) MOUNTING SURFACE DIA. HOLES 24 PLCS. 1.0 +0.2/-0 2.5 (.098) (.039 +.008/-0) R2 R1 SCHEMATIC 3 3 3 3 3 3 3 3 1 R1 1 R6 1 R5 1 R4 DIMENSIONS: 1 R2 1 R3 MM (INCHES) 1 R1 2 2 2 1 1 R8 R7 2 2 1 1 R6 R5 2 2 1 1 R4 R3 2 1 1 R2 R1 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. PTD90 Series - 9 mm Multi-Ganged Potentiometer How To Order Product Dimensions SHAFT STYLE "K" B PTD90 1 - 2 0 20 K - B 203 SHAFT STYLE "F" 0.5 L (.020) 1.5 (.059) L Model * PTD90 = No Switch 0.5 (.020) B 18 TEETH KNURL A F 4.5 (.177) 1.0 (.039) 6.0 +0/-0.1 (.236 +0/-.004) DIA. 30 9.5 0.3 (.374 .012) 6.0 (.236) 4.8 0.3 (.189 .012) 9.5 0.3 (.374 .012) 6.0 +0/-0.1 (.236 +0/-.004) DIA. 60 4.5 (.177) 6.5 0.3 (.256 .012) 6.5 0.3 (.256 .012) 6.0 (.236) 0.8 (.031) 2.0 (.079) 0.8 (.031) 4.8 0.3 (.189 .012) 0.8 (.031) 2.0 (.079) 0.8 (.031) 3.5 (.138) 5.0 (.197) Pin Style * 1 = PC Pins vertical/ down facing and 10 % Total Resistance Tolerance * 2 = PC Pins vertical/ down facing and 20 % Total Resistance Tolerance Center Detent Option * 0 = No Detent * 2 = Center Detent 3.5 (.138) Standard Shaft Length * 15 = 15 mm * 20 = 20 mm * 25 = 25 mm 5.0 (.197) SHAFT SHOWN IN CCW POSITION SHAFT SHOWN IN CCW POSITION No. of Sections * 1 = 1 Section * 2 = 2 Sections * 3 = 3 Sections * 4 = 4 Sections * 5 = 5 Sections * 6 = 6 Sections * 8 = 8 Sections L 15 (.591) 20 (.787) 25 (.984) L 15 (.591) 20 (.787) 25 (.984) B 5 (.197) 7 (.276) 10 (.394) B 5 (.197) 7 (.276) 10 (.394) A 6 (.236) 10 (.394) 12 (.472) F 7 (.276) 12 (.472) 12 (.472) Shaft Styles * K = Knurled Type Shaft (Metal) 18 Toothed Serration Type * F = Flatted Metal Shaft Resistance Taper * A = Audio Taper * B = Linear Taper Resistance Code (See Table) DIMENSIONS: MM (INCHES) Other taper and shaft styles available. Standard Resistance Table Resistance (Ohms) 1,000 2,000 5,000 10,000 20,000 50,000 100,000 200,000 500,000 1,000,000 REV. 05/10 Specifications are subject to change without notice. Customers should verify actual device performance in their specific applications. Resistance Code 102 202 502 103 203 503 104 204 504 105