SN74LS10D - TEXAS INSTRUMENTS - Datasheet.Directory

WSL

www.vishay.com Vishay Dale

Revision: 06-Jun-12 1Document Number: 30100

For technical questions, contact: ww2bresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

Power Metal Strip® Resistors, Low Value

(Down to 0.0005 Ω), Surface Mount

FEATURES

•Ideal for all types of current sensing, voltage

division and pulse applications including switching

and linear power supplies, instruments, power

amplifiers

• Proprietary processing technique produces

extremely low resistance values (down to 0.0005

)

• All welded construction

• Solderable terminations

• Very low inductance 0.5 nH to 5 nH

• Excellent frequency response to 50 MHz

• Low thermal EMF (< 3 μV/°C)

• Solid metal nickel-chrome or manganese-copper

alloy resistive element with low TCR (< 20 ppm/°C)

• AEC-Q200 qualified available

(1)

• Material categorization: For definitions of compliance please

see

www.vishay.com/doc?99912

Note

(1) Flame retardance test may not be applicable to some resistor

technologies

Notes

• Part marking: Value; tolerance: Due to resistor size limitations some resistors will be marked with only the resistance value.

(2) For values above 0.1 Ω derate linearly to 80 % rated power at 0.5 Ω.

STANDARD ELECTRICAL SPECIFICATIONS

GLOBAL

MODEL SIZE POWER RATING P70 °C

RESISTANCE VALUE RANGE ΩWEIGHT (typical)

g/1000 pieces

Tol. ± 0.5 % Tol. ± 1.0 %

WSL0603 0603 0.1 0.01 to 0.1 0.01 to 0.1 1.9

WSL0805 0805 0.125 0.005 to 0.2 0.005 to 0.2 4.8

WSL1206 1206 0.25 0.005 to 0.2 0.001 to 0.2 16.2

WSL2010 2010 0.5 0.004 to 0.5 0.001 to 0.5 38.9

WSL2512 2512 1.0 (2) 0.003 to 0.5 0.0005 to 0.5 63.6

WSL2816 2816 2.0 0.003 to 0.1 0.002 to 0.1 118

TECHNICAL SPECIFICATIONS

PARAMETER UNIT WSL RESISTOR CHARACTERISTICS

Temperature coefficient ppm/°C ± 75 for 7 mΩ to 0.5 Ω, ± 110 for 5 mΩ to 6.9 mΩ, ± 150 for 3 mΩ to 4.9 mΩ,

± 275 for 1 mΩ to 2.9 mΩ, ± 400 for 0.5 mΩ to 0.99 mΩ

Operating temperature range °C - 65 to + 170

Maximum working voltage V (P x R)1/2

GLOBAL PART NUMBER INFORMATION

Global Part Numbering example: WSL25124L000FTA

GLOBAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING CODE SPECIAL

WSL0603

WSL0805

WSL1206

WSL2010

WSL2512

WSL2816

= m

= Decimal

5L000

= 0.005

R0100

= 0.01

* Use “

” for resistance

values < 0.01

= ± 0.5 %

= ± 1.0 %

= ± 5.0 %

= Lead (Pb)-free, tape/reel

= Lead (Pb)-free, tape/reel (WSL2816)

= Lead (Pb)-free, bulk

(Dash number)

(up to 2 digits)

From

1 to 99

applicable

= Tin/lead, tape/reel (R86)

= Tin/lead, tape/reel (RT1, for WSL0603 and WSL0805)

= Tin/lead, tape/reel (RJ9, WSL2816)

= Tin/lead, bulk (B43)

Historical Part Numbering example: WSL2512 0.004 Ω 1 % R86

WSL2512 0.004 Ω1 % R86

HISTORICAL MODEL RESISTANCE VALUE TOLERANCE CODE PACKAGING

L251 4L02WS T0 FA0

WSL

www.vishay.com Vishay Dale

Revision: 06-Jun-12 2Document Number: 30100

For technical questions, contact: ww2bresistors@vishay.com

THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT

ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000

DIMENSIONS in inches (millimeters)

DERATING

Note

• Embossed Carrier Tape per EIA-481.

MODEL RESISTANCE

RANGE (Ω)

DIMENSIONS SOLDER PAD DIMENSIONS

LW H Tabl

WSL0603 0.01 to 0.1 0.060 ± 0.010

(1.52 ± 0.254) 0.030 ± 0.010

(0.76 ± 0.254) 0.013 ± 0.005

(0.330 ± 0.127) 0.015 ± 0.010

(0.381 ± 0.254) 0.040

(1.01) 0.040

(1.01) 0.020

(0.50)

WSL0805 0.005 to 0.2 0.080 ± 0.010

(2.03 ± 0.254) 0.050 ± 0.010

(1.27 ± 0.254) 0.013 ± 0.005

(0.330 ± 0.127) 0.015 ± 0.010

(0.381 ± 0.254) 0.040

(1.02) 0.050

(1.27) 0.020

(0.50)

WSL1206

0.001 to 0.0019

0.126 ± 0.010

(3.20 ± 0.254) 0.063 ± 0.010

(1.60 ± 0.254) 0.025 ± 0.010

(0.635 ± 0.254)

0.041 ± 0.010

(1.04 ± 0.254)

0.062

(1.57) 0.070

(1.78) 0.030

(0.76)

0.002 to 0.0059 0.025 ± 0.010

(0.635 ± 0.254)

0.006 to 0.20 0.020 ± 0.010

(0.508 ± 0.254)

WSL2010

0.001 to 0.0069 0.200 ± 0.010

(5.08 ± 0.254) 0.100 ± 0.010

(2.54 ± 0.254) 0.025 ± 0.010

(0.635 ± 0.254)

0.058 ± 0.010

(1.47 ± 0.254) 0.093

(2.36) 0.120

(3.05) 0.055

(1.40)

0.007 to 0.5 0.020 ± 0.010

(0.508 ± 0.254) 0.055

(1.40) 0.120

(3.05) 0.130

(3.30)

WSL2512

0.0005 to 0.00099

0.250 ± 0.010

(6.35 ± 0.254) 0.125 ± 0.010

(3.18 ± 0.254) 0.025 ± 0.010

(0.635 ± 0.254)

0.107 ± 0.010

(2.72 ± 0.254) 0.120

(3.05)

0.145

(3.68)

0.050

(1.27)

0.001 to 0.0049 0.087 ± 0.010

(2.21 ± 0.254)

0.005 to 0.0069 0.047 ± 0.010

(1.19 ± 0.254) 0.083

(2.11) 0.125

(3.18)

0.007 to 0.5 0.030 ± 0.010

(0.762 ± 0.254) 0.065

(1.65) 0.160

(4.06)

WSL2816

0.002 to 0.00399 0.280 ± 0.010

(7.1 ± 0.254) 0.165 ± 0.010

(4.2 ± 0.254) 0.025 ± 0.010

(0.635 ± 0.254)

0.098 ± 0.010

(2.49 ± 0.254) 0.096

(2.45) 0.185

(4.7) 0.125

(3.20)

0.004 to 0.1 0.062 ± 0.010

(1.57 ± 0.254)

PERFORMANCE

TEST CONDITIONS OF TEST TEST LIMITS

Thermal shock - 55 °C to + 150 °C, 1000 cycles, 15 min at each extreme ± (0.5 % + 0.0005 Ω) ΔR

Short time overload 5 x rated power for 5 s ± (0.5 % + 0.0005 Ω) ΔR

Low temperature operation - 65 °C for 24 h ± (0.5 % + 0.0005 Ω) ΔR

High temperature exposure 1000 h at + 170 °C ± (1.0 % + 0.0005 Ω) ΔR

Bias humidity + 85 °C, 85 % RH, 10 % bias, 1000 h ± (0.5 % + 0.0005 Ω) ΔR

Mechanical shock 100 g’s for 6 ms, 5 pulses ± (0.5 % + 0.0005 Ω) ΔR

Vibration Frequency varied 10 Hz to 2000 Hz in 1 min, 3 directions, 12 h ± (0.5 % + 0.0005 Ω) ΔR

Load life 1000 h at rated power, + 70 °C, 1.5 h “ON”, 0.5 h “OFF” ± (1.0 % + 0.0005 Ω) ΔR

Resistance to solder heat + 260 °C solder, 10 s to 12 s dwell, 25 mm/s emergence ± (0.5 % + 0.0005 Ω) ΔR

Moisture resistance MIL-STD-202, method 106, 0 % power, 7a and 7b not required ± (0.5 % + 0.0005 Ω) ΔR

PACKAGING

MODEL REEL

TAPE WIDTH DIAMETER PIECES/REEL CODE

WSL0603 8 mm/punched paper 178 mm/7" 5000 EA

WSL0805 8 mm/punched paper 178 mm/7" 5000 EA

WSL1206 8 mm/embossed plastic 178 mm/7" 4000 EA

WSL2010 12 mm/embossed plastic 178 mm/7" 4000 EA

WSL2512 12 mm/embossed plastic 178 mm/7" 2000 EA

WSL2816 12 mm/embossed plastic 178 mm/7" 2000 EH

120

100

- 65 - 50 - 25 0 25 50 75 100 125 150 170

Ambient Temperature in °C

Rated Power in %

Legal Disclaimer Notice

www.vishay.com Vishay

Revision: 02-Oct-12 1Document Number: 91000

Disclaimer

ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE

RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE.

Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively,

“Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other

disclosure relating to any product.

Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or

the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all

liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special,

consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular

purpose, non-infringement and merchantability.

Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical

requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements

about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular

product with the properties described in the product specification is suitable for use in a particular application. Parameters

provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All

operating parameters, including typical parameters, must be validated for each customer application by the customer’s

technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase,

including but not limited to the warranty expressed therein.

Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining

applications or for any other application in which the failure of the Vishay product could result in personal injury or death.

Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please

contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications.

No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by

any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners.

Material Category Policy

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the

definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council

of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment

(EEE) - recast, unless otherwise specified as non-compliant.

Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that

all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU.

Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free

requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference

to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21

conform to JEDEC JS709A standards.