EXB30 Series Dual positive output DC-DC CONVERTERS * * * * * * * * * * * 30 W High Efficiency DC-DC Converters 1 Two independent positive outputs Output voltage tracking High efficiency Approved to EN60950, UL1950, CSA C22.2 No. 950 Operating ambient temperature of -40 C to +70 C (natural convection) Up to 100% load imbalance Separate trim on each output No minimum load Complies with ETS 300 019-1-3/2-3 Fully compliant with ETS 300 386-1 Available RoHS compliant The EXB30 Dual series are isolated dual positive-output dc-dc converters. The products are designed using a high-efficiency synchronous rectification topology. They feature two independent fully regulated outputs, which are individually trimmable. The EXB30 Dual employs Dynamic Current Allocation such that maximum current can be drawn from either output with a total output current capability of 6 A. No minimum load is required for either output. In addition, these products incorporate a tracking feature such that both outputs rise together with their output differential never exceeding 0.7 Volts during startup. A remote ON/OFF and latching overvoltage protection for both outputs are included as standard. These latches are enabled by default, but can be disabled by the user. 2 YEAR WARRANTY SPECIFICATIONS All specifications are typical at nominal input, full load at 25 C unless otherwise stated OUTPUT SPECIFICATIONS EMC CHARACTERISTICS Voltage adjustability Both outputs 11% min. Voltage accuracy Both outputs 1.5% max. Line regulation Low line to high line Low line to high line Load regulation Full load to no load Minimum load Both outputs Ripple and noise 20 MHz bandwidth Vout1 0.4% Vout2 0.4% 0.4% 0% 150 mV pk-pk max. 30 mV rms max. Temperature coefficient Transient response peak dev. settling time Short circuit protection Isc 8 Arms (See Note 3) Tracking 0.02%/C 50% to 75% and back to 1.0%, no external cap. Both outputs 150 mV 400 s Continuous automatic recovery Max. differential 0.7 V during start-up and in operation INPUT SPECIFICATIONS Input voltage range 24 Vin nominal 48 Vin nominal Input current No load Remote OFF UVLO turn ON voltage UVLO turn OFF voltage All inputs (See Note 2) All inputs (See Note 2) Start-up time Nominal line 18-36 Vdc 36-75 Vdc 150 mA max. 4 mA max. 94% typ. 86% typ. ETS 300 386-1 table 5 Conducted emissions Radiated emissions Immunity: ESD air ESD contact EFT DC power EFT signal Radiated field enclosure Surges indoor signal Conducted (DC power) Conducted (signal) Input transients Level A Level B Level B EN61000-4-2 8 kV (NP), 15 kV (RP) EN61000-4-2 6 kV (NP), 8 kV (RP) EN61000-4-4 2 kV (NP), 4 kV (LFS) EN61000-4-4 1 kV (NP), 2 kV (LFS) EN61000-4-3 10 V/m (NP) EN61000-4-5 500 V (RP) EN61000-4-6 10 V (NP) EN61000-4-6 10 V (NP) ETS 300 132-2, ETR 283 GENERAL SPECIFICATIONS Efficiency See table Basic insulation Input/output 1500 Vdc Input fuse 24 V Input fuse 48 V (See Note 4) 3.5 A slow blow 2.0 A slow blow Switching frequency Fixed 280 kHz Approvals and standards (See Notes 4, 6) EN60950 Bi-national UL1950 CSA C22.2 No. 950 Weight MTBF (See Application Note 109) 52 g (1.84 oz) MIL-HDBK-217 6,283,000 hours ENVIRONMENTAL SPECIFICATIONS Thermal performance 20 ms max. Active high remote ON/OFF Logic compatibility Open Collector ref. to -input ON Open circuit voltage 4.5 Vdc OFF 0.6 Vdc EN55022 with external filter EN55022 with external filter EN55022 (See App. Note 109) Operating ambient temperature Non-operating ETS 300 019-2-3 -40 C to +70 C, See curves -55 C to +105 C Classes T3.1 to T3.5 Air temperature Low: IEC 68-2-1 -40 C High: IEC 68-2-2 +70 C Change: IEC 68-2-14 -40 C to +70 C Relative humidity IEC 68-2-56 IEC 68-2-30 10% to 100% RH condensation File Name: exb30d.pdf Rev (02): 05 Dec 2005 EXB30 Series Dual positive output DC-DC CONVERTERS 30 W High Efficiency DC-DC Converters 2 For the most current data and application support visit www.artesyn.com/powergroup/products.htm INPUT VOLTAGE OUTPUT VOLTAGE 1 2 OUTPUT CURRENT 1 2 (5) OVP (1) 1 2 TYPICAL EFFICIENCY MODEL NUMBER (7,8) 18-36 Vdc 5V 3.3 V 6A 6A 6.25 V 4.13 V 87% EXB30-24D05-3V3J 18-36 Vdc 3.3 V 2.5 V 6A 6A 4.13 V 3.13 V 85% EXB30-24D3V3-2V5J 36-75 Vdc 5V 3.3 V 6A 6A 6.25 V 4.13 V 88% EXB30-48D05-3V3J 36-75 Vdc 3.3 V 2.5 V 6A 6A 4.13 V 3.13 V 85% EXB30-48D3V3-2V5J Notes 1 2 3 4 5 6 7 8 Latching OVP response time is 1 ms (typical). OVP latch is reset by toggling remote ON/OFF or by recycling the input voltage. Figures are percentage of minimum input voltage. Rshort 20 m. User must provide recommended fuses in order to comply with safety approvals. Maximum continuous output power. 30 Watts for D05-3V3J models 20 Watts for D3V3-2V5J models. Maximum temperature on hot spots not to exceed 120 C. See Application Note 109 on our website for details. The `J' suffix indicates that these parts are Pb-free (RoHS 6/6) compliant. TSE RoHS 5/6 (non Pb-free) compliant versions may be available on special request, please contact your local sales representative for details. NOTICE: Some models do not support all options. Please contact your local Artesyn representative or use the on-line model number search tool at http://www.artesyn.com/powergroup/products.htm to find a suitable alternative. EXTERNAL OUTPUT TRIMMING All models can be externally trimmed by 11% using either method shown below. Output current Io1+Io2 (max) SOA -40C 70 100C Tamb CAUTION: Hazardous internal voltages and high temperatures. Ensure that unit is not user accessible. + OUT TRIM - OUT + OUT - OUT TRIM DOWN TRIM TRIM UP TRIM International Safety Standard Approvals UL/cUL CAN/CSA 22.2 No. 60950-00 : UL 60950 File No. E1741404 VDE Licence No. 122485. File No. 10401-3336-0157 CB Report and Certificate to IEC60950, Certificate No. DE1-31103 File Name: exb30d.pdf Rev (02): 05 Dec 2005 EXB30 Series Dual positive output DC-DC CONVERTERS 30 W High Efficiency DC-DC Converters 2 0.480 (12.20) Max. For the most current data and application support visit www.artesyn.com/powergroup/products.htm 0.020 (0.51) 4 PLACES O0.040 0.002 (O1.02 0.05) 9 PLACES 0.138 (3.50) 0.024 (0.61) MIN. 0.500 (12.70) Max. MAX OPEN-FRAME CONVERTER HEIGHT MINIMUM CLEARANCE FROM BOTTOM OF CONVERTER TO LOWEST COMPONENT 8 3 1.600 (40.64) 9 1.300 (33.02) 0.600 (15.24) 10 1.000 (25.40) 1.400 (35.56) 2.000 (50.80) 0.02 2.400 (60.96) 0.5 1 1.000 (25.40) 0.300 (7.62) 0.400 (10.16) 0.500 (12.70) 2.280 0.02 (57.91) (0.5) 7 6 4 5 1.900 (48.26) BOTTOM VIEW ALL DIMENSIONS IN INCHES (mm) GENERAL TOLERANCE 0.01in (0.25mm) EXCEPT WHERE SPECIFIED OTHERWISE PIN CONNECTIONS PIN NUMBER FUNCTION 1 - Vin 2 No Pin 3 Remote ON/OFF 4 + Vin 5 OP1 Trim 6 OP1 Return 7 OP1 8 OP2 Trim 9 OP2 Return 10 OP2 Datasheet (c) Artesyn Technologies(R) 2005 The information and specifications contained in this datasheet are believed to be correct at time of publication. However, Artesyn Technologies accepts no responsibility for consequences arising from printing errors or inaccuracies. Specifications are subject to change without notice. No rights under any patent accompany the sale of any such product(s) or information contained herein. Please consult our website for the following items: Application Note Longform Data Sheet www.artesyn.com File Name: exb30d.pdf Rev (02): 05 Dec 2005