BZW50-10,B/180,B (R) TRANSILTM FEATURES PEAK PULSE POWER : 5000 W (10/1000s) STAND-OFF VOLTAGE RANGE : From 10V to 180V UNI AND BIDIRECTIONAL TYPES LOW CLAMPING FACTOR FAST RESPONSE TIME UL RECOGNIZED DESCRIPTION R6 Transil diodes provide high overvoltage protection by clamping action. Their instantaneous response to transient overvoltages makes them particularly suited to protect voltage sensitive devices such as MOS Technology and low voltage supplied IC's. ABSOLUTE MAXIMUM RATINGS (Tamb = 25C) Symbol Parameter Value Unit 5000 W Peak pulse power dissipation (see note 1) Tj initial = Tamb Power dissipation on infinite heatsink Tamb = 75C 6.5 W IFSM Non repetitive surge peak forward current for unidirectional types tp = 10ms Tj initial = Tamb 500 A Tstg Tj Storage temperature range Maximum junction temperature - 65 to + 175 175 C C TL Maximum lead temperature for soldering during 10s at 5mm from case 230 C Value Unit 15 C/W 65 C/W PPP P Note 1 : For a surge greater than the maximum values, the diode will fail in short-circuit. THERMAL RESISTANCES Symbol Parameter Rth (j-l) Junction to leads Rth (j-a) Junction to ambient on printed circuit. February 2003- Ed : 4A Llead = 10 mm 1/5 BZW50-10,B/180,B ELECTRICAL CHARACTERISTICS (Tamb = 25C) Symbol I IF Parameter VRM Stand-off voltage VBR Breakdown voltage VCL Clamping voltage IRM Leakage current @ VRM IPP Peak pulse current T Voltage temperature coefficient VF Forward voltage drop Types VCL VBR V RM VF V I RM I PP IRM @ VRM max VBR @ IR min VCL @ IPP max note2 VCL @ IPP max 10/1000s 8/20s T C max typ note3 note4 A V V mA V A V A 10 / C pF BZW50-10 BZW50-10B 5 10 11.1 1 18.8 266 23.4 2564 7.8 24000 BZW50-12 BZW50-12B 5 12 13.3 1 22 227 28 2143 8.4 18500 BZW50-15 BZW50-15B 5 15 16.6 1 26.9 186 35 1714 8.8 13500 BZW50-18 BZW50-18B 5 18 20 1 32.2 155 41.5 1446 9.2 11500 BZW50-22 BZW50-22B 5 22 24.4 1 39.4 127 51 1177 9.6 8500 BZW50-27 BZW50-27B 5 27 30 1 48.3 103 62 968 9.8 7000 BZW50-33 BZW50-33B 5 33 36.6 1 59 85 76 789 10 5750 BZW50-39 BZW50-39B 5 39 43.3 1 69.4 72 90 667 10.1 4800 BZW50-47 BZW50-47B 5 47 52 1 83.2 60.1 108 556 10.3 4100 BZW50-56 BZW50-56B 5 56 62.2 1 99.6 50 129 465 10.4 3400 BZW50-68 BZW50-68B 5 68 75.6 1 121 41 157 382 10.5 3000 BZW50-82 BZW50-82B 5 82 91 1 145 34 189 317 10.6 2600 BZW50-100 BZW50-100B 5 100 111 1 179 28 228 263 10.7 2300 BZW50-120 BZW50-120B 5 120 133 1 215 23 274 219 10.8 1900 BZW50-150 BZW50-150B 5 150 166 1 269 19 343 175 10.8 1700 BZW50-180 BZW50-180B 5 180 200 1 322 16 410 146 10.8 1500 Unidirectional Bidirectional Fig. 1: Peak pulse power dissipation versus initial junction temperature (printed circuit board). % I PP 100 10 s PULSE WAVEFORM 10/1000 s 50 0 t 1000 s Note 2 : Note 3 : Note 4 : 2/5 -4 Pulse test: tp < 50 ms. VBR = T * (Tamb - 25) * VBR(25C) VR = 0 V, F = 1 MHz. For bidirectional types, capacitance value is divided by 2. BZW50-10,B/180,B Fig. 2 : Peak pulse power versus exponential pulse duration. Pp p (W) 1E7 C Tj initial = 25o 1E6 1E5 1E4 1E3 tp (ms ) EXPO. 1E2 0.001 Fig. 3 : 0.01 0.1 1 10 100 Clamping voltage versus peak pulse current. Exponential waveform tp = 20 s________ tp = 1 ms----------tp = 10 ms............... Note : The curves of the figure 3 are specified for a junction temperature of 25C before surge. The given results may be extrapolated for other junction temperatures by using the following formula : VBR = T* (Tamb -25) * VBR (25C). For intermediate voltages, extrapolate the given results. 3/5 BZW50-10,B/180,B Fig. 4a : Capacitance versus reverse applied voltage for unidirectional types (typical values). Fig. 4b : Capacitance versus reverse applied voltage for bidirectional types (typical values). Fig. 5 : Peak forward voltage drop versus peak forward current (typical values for unidirectional types). Fig. 6 : Transient thermal impedance junction-ambient versus pulse duration (For FR4 PC Board with L lead = 10mm). Note : Multiply by 2 for units with VBR > 220V. Fig. 7 : Relative variation of leakage current versus junction temperature. 4/5 BZW50-10,B/180,B ORDER CODE BZW 50 - 10 B RL PACKAGING: ' ' = Ammopack tape 'RL' = Tape & reel 5000W BIDIRECTIONAL No suffix: unidirectional STAND-OFF VOLTAGE MARKING : Logo, Date Code, Type Code, Cathode Band (for unidirectional types only). PACKAGE MECHANICAL DATA R6 (Plastic) B A B DIMENSIONS REF. Millimeters Min. D C A 8.6 Typ. Max. Inches Min. Typ. Max. 9.1 0.338 0.358 B 25.4 C 8.6 9.1 0.338 1 0.358 D 1.2 1.3 0.047 0.051 Packaging : standard packaging is tape and reel. Weight = 2.048 g. Information furnished is believed to be accurate and reliable. However, STMicroelectronics assumes no responsibility for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its use. No license is granted by implication or otherwise under any patent or patent rights of STMicroelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. STMicroelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of STMicroelectronics. The ST logo is a registered trademark of STMicroelectronics (c) 2003 STMicroelectronics - Printed in Italy - All rights reserved. STMicroelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - Finland - France - Germany Hong Kong - India - Israel - Italy - Japan - Malaysia - Malta - Morocco - Singapore Spain - Sweden - Switzerland - United Kingdom - United States. http://www.st.com 5/5