INTEGRATED CIRCUITS 74F242 Quad transceiver, inverting (3-State) 74F243 Quad transceiver (3-State) Product specification IC15 Data Handbook 1990 Aug 31 Philips Semiconductors Product specification Transceivers 74F242/74F243 74F242 Quad Transceiver, Inverting (3-State) 74F243 Quad Transceiver (3-State) PIN CONFIGURATION OEA 1 14 VCC NC 2 13 OEB A0 3 12 NC A1 4 11 B0 A2 5 10 B1 A3 6 9 B2 GND 7 8 B3 TYPE TYPICAL PROPAGATION DELAY TYPICAL SUPPLY CURRENT (TOTAL) 74F242 4.3ns 31.2mA 74F243 4.0ns 66mA ORDERING INFORMATION SF00765 DESCRIPTION COMMERCIAL RANGE VCC = 5V 10%, Tamb = 0C to +70C PKG DWG # 14-pin plastic DIP N74F242N, N74F243N SOT27-1 14-pin plastic SO N74F242D, N74F243D SOT108-1 INPUT AND OUTPUT LOADING AND FAN-OUT TABLE 74F (U.L.) HIGH/LOW LOAD VALUE HIGH/LOW An, Bn PINS Data inputs (74F242) 3.5/1.67 70A/1.0mA An, Bn Data inputs (74F243) 3.5/2.67 70A/1.6mA OEA Output enable input (active Low) 1.0/1.67 20A/1.0mA OEB Output enable input 1.0/1.67 20A/1.0mA 750/106.7 15mA/64mA An, Bn DESCRIPTION Data outputs NOTE: One (1.0) FAST unit load is defined as: 20A in the High state and 0.6mA in the Low state. LOGIC SYMBOLS 74F242 3 A0 1 OEA 13 OEB B0 VCC = Pin 14 GND = Pin 7 11 4 A1 B1 10 5 A2 B2 9 74F243 6 4 5 6 A0 A1 A2 A3 B0 B1 B2 B3 11 10 9 8 A3 1 OEA 13 OEB B3 8 VCC = Pin 14 GND = Pin 7 SF00767 1990 Aug 30 3 SF00768 2 853-0356 00285 Philips Semiconductors Product specification Transceivers 74F242/74F243 LOGIC SYMBOLS (IEEE/IEC) 74F243 74F242 1 1 EN1 13 EN1 13 EN2 EN2 11 3 4 10 4 10 5 9 5 9 6 8 6 8 3 1 11 1 2 2 SF00769 SF00770 74F243 74F242 OEA A0 A1 A2 A3 VCC = Pin 14 GND = Pin 7 OEB 1 OEA 3 11 4 10 5 9 6 8 B0 A0 B1 A1 B2 A2 B3 A3 13 VCC = Pin 14 GND = Pin 7 SF00771 LOGIC DIAGRAMS FUNCTION TABLE, 74F242 OEB 1 3 11 4 10 5 9 6 8 B0 B1 B2 B3 13 SF00772 FUNCTION TABLE, 74F243 INPUTS OUTPUTS INPUTS OUTPUTS OEA OEB An Bn OEA OEB An Bn L L INPUT B=A L L INPUT B=A H L Z Z H L Z Z L H a a L H a a H H A=B INPUT H H A=B INPUT H = High voltage level L = Low voltage level Z = High impedance "off" state a = This condition is not allowed due to excessive currents 1990 Aug 30 3 Philips Semiconductors Product specification Transceivers 74F242/74F243 ABSOLUTE MAXIMUM RATINGS (Operation beyond the limits set forth in this table may impair the useful life of the device. Unless otherwise noted these limits are over the operating free-air temperature range.) SYMBOL PARAMETER RATING UNIT VCC Supply voltage -0.5 to +7.0 V VIN Input voltage -0.5 to +7.0 V IIN Input current -30 to +5 mA VOUT Voltage applied to output in High output state -0.5 to VCC V IOUT Current applied to output in Low output state Tamb Operating free-air temperature range Tstg Storage temperature 128 mA 0 to +70 C -65 to +150 C RECOMMENDED OPERATING CONDITIONS LIMITS SYMBOL PARAMETER UNIT MIN NOM MAX 5.0 5.5 VCC Supply voltage 4.5 VIH High-level input voltage 2.0 VIL Low-level input voltage 0.8 V IIK Input clamp current -18 mA IOH High-level output current -15 mA IOL Low-level output current 64 mA Tamb Operating free-air temperature range 70 C 1990 Aug 30 0 4 V V Philips Semiconductors Product specification Transceivers 74F242/74F243 DC ELECTRICAL CHARACTERISTICS (Over recommended operating free-air temperature range unless otherwise noted.) SYMBOL VOH VCC = MIN, VIL = MAX MAX, VIH = MIN IOH 3mA O = -3mA VCC = MIN, VIL = MAX MAX, VIH = MIN IOL = -15mA 15mA VCC = MIN, VIL = MAX MAX, VIH = MIN IOH=MAX High level output voltage High-level VOL Low level output voltage Low-level VIK Input clamp voltage II Input current at maximum input voltage IIH High-level input current IIL Low-level input current IIH+IOZH Off-state output current High-level voltage applied IIL+IOZL Off-state output current Low-level voltage applied IOS Short-circuit output current3 MIN TYP2 10%VCC 2.4 5%VCC 2.7 3.3 10%VCC 2.0 3.2 5%VCC 2.0 3.1 MAX UNIT V V 10%VCC 0.55 V 5%VCC VCC = MIN, II = IIK 0.42 0.55 -0.73 -1.2 V A0-A3, B0-B3 VCC = MAX, VI = 5.5V 1 mA OEA, OEB VCC = MAX, VI = 7.0V 100 A OEA, OEB VCC = MAX, VI = 2.7V 20 A only VCC = MAX, VI = 0.5V -1 mA VCC = MAX, VO = 2.7V 70 A 74F242 74F243 -1.0 VCC = MAX, MAX VO = 0 0.5V 5V VCC = MAX Supply current (total) 74F243 mA -1.6 -100 -225 mA 22 35 mA 40 55 mA ICCZ 32 45 mA ICCH 64 80 mA 64 90 mA 71 90 mA ICCH 74F242 ICC LIMITS TEST CONDITIONS1 PARAMETER ICCL ICCL VCC = MAX VCC = MAX ICCZ NOTES: 1. For conditions shown as MIN or MAX, use the appropriate value specified under recommended operating conditions for the applicable type. 2. All typical values are at VCC = 5V, Tamb = 25C. 3. Not more than one output should be shorted at a time. For testing IOS, the use of high-speed test apparatus and/or sample-and-hold techniques are preferable in order to minimize internal heating and more accurately reflect operational values. Otherwise, prolonged shorting of a High output may raise the chip temperature well above normal and thereby cause invalid readings in other parameter tests. In any sequence of parameter tests, IOS tests should be performed last. 1990 Aug 30 5 Philips Semiconductors Product specification Transceivers 74F242/74F243 AC ELECTRICAL CHARACTERISTICS LIMITS SYMBOL VCC = +5V 10% Tamb = 0C to +70C CL = 50pF, RL = 500 VCC = +5V Tamb = +25C CL = 50pF, RL = 500 TEST CONDITION PARAMETER UNIT MIN TYP MAX MIN MAX Waveform NO TAG 2.5 2.0 3.5 3.0 6.0 4.5 2.5 2.0 7.0 4.5 ns Waveform 3 Waveform 4 3.0 3.5 4.0 6.5 7.0 9.0 3.0 3.5 8.0 10.5 ns tPLH tPHL Propagation delay An, Bn to Bn, An tPZH tPZL Output Enable time to High or Low level tPHZ tPLZ Output Disable time from High or Low level Waveform 3 Waveform 4 3.5 3.5 5.5 6.0 8.5 9.5 3.5 3.5 9.0 11.0 ns tPLH tPHL Propagation delay An, Bn to Bn, An Waveform 2 2.5 2.5 4.0 4.0 5.2 5.2 2.0 2.0 6.2 6.5 ns tPZH tPZL Output Enable time to High or Low level Waveform 3 Waveform 4 2.0 2.0 4.5 5.0 5.7 7.5 2.0 2.0 6.7 8.5 ns tPHZ tPLZ Output Disable time from High or Low level Waveform 3 Waveform 4 2.0 2.0 4.0 4.5 6.0 6.0 2.0 2.0 7.0 7.0 ns 74F242 74F243 AC WAVEFORMS For all waveforms, VM = 1.5V. An, Bn VM VM tPHL tPLH VM Bn, An An, Bn VM VM tPLH VM tPHL VM Bn, An VM SF00773 SF00202 Waveform 2. For Non-Inverting Outputs Waveform 1. For Inverting Outputs OEA OEA VM VM VM OEB VM OEB tPZH tPLZ tPZL tPLZ VOH -0.3V An, Bn VM An, Bn 0V SF00775 VOL +0.3V SF00776 Waveform 3. 3-State Output Enable Time to High Level and Output Disable Time from High Level 1990 Aug 30 VM Waveform 4. 3-State Output Enable Time to Low Level and Output Disable Time from Low Level 6 Philips Semiconductors Product specification Transceivers 74F242/74F243 TEST CIRCUIT AND WAVEFORMS VCC 7.0V VIN RL VOUT PULSE GENERATOR tw 90% NEGATIVE PULSE VM CL AMP (V) VM 10% D.U.T. RT 90% 10% tTHL (tf ) tTLH (tr ) tTLH (tr ) tTHL (tf ) 0V RL AMP (V) 90% 90% Test Circuit for 3-State Outputs POSITIVE PULSE VM VM 10% TEST tPLZ tPZL All other SWITCH closed closed open DEFINITIONS: RL = Load resistor; see AC electrical characteristics for value. CL = Load capacitance includes jig and probe capacitance; see AC electrical characteristics for value. RT = Termination resistance should be equal to ZOUT of pulse generators. 10% tw SWITCH POSITION 0V Input Pulse Definition INPUT PULSE REQUIREMENTS family amplitude VM 74F 3.0V 1.5V rep. rate tw tTLH tTHL 1MHz 500ns 2.5ns 2.5ns SF00777 1990 Aug 30 7 Philips Semiconductors Product specification Transceivers 74F242, 74F243 DIP14: plastic dual in-line package; 14 leads (300 mil) 1990 Aug 30 8 SOT27-1 Philips Semiconductors Product specification Transceivers 74F242, 74F243 SO14: plastic small outline package; 14 leads; body width 3.9 mm 1990 Aug 30 9 SOT108-1 Philips Semiconductors Product specification Transceivers 74F242, 74F243 Data sheet status Data sheet status Product status Definition [1] Objective specification Development This data sheet contains the design target or goal specifications for product development. Specification may change in any manner without notice. Preliminary specification Qualification This data sheet contains preliminary data, and supplementary data will be published at a later date. Philips Semiconductors reserves the right to make chages at any time without notice in order to improve design and supply the best possible product. Product specification Production This data sheet contains final specifications. Philips Semiconductors reserves the right to make changes at any time without notice in order to improve design and supply the best possible product. [1] Please consult the most recently issued datasheet before initiating or completing a design. Definitions Short-form specification -- The data in a short-form specification is extracted from a full data sheet with the same type number and title. For detailed information see the relevant data sheet or data handbook. Limiting values definition -- Limiting values given are in accordance with the Absolute Maximum Rating System (IEC 134). Stress above one or more of the limiting values may cause permanent damage to the device. These are stress ratings only and operation of the device at these or at any other conditions above those given in the Characteristics sections of the specification is not implied. Exposure to limiting values for extended periods may affect device reliability. Application information -- Applications that are described herein for any of these products are for illustrative purposes only. Philips Semiconductors make no representation or warranty that such applications will be suitable for the specified use without further testing or modification. Disclaimers Life support -- These products are not designed for use in life support appliances, devices or systems where malfunction of these products can reasonably be expected to result in personal injury. Philips Semiconductors customers using or selling these products for use in such applications do so at their own risk and agree to fully indemnify Philips Semiconductors for any damages resulting from such application. Right to make changes -- Philips Semiconductors reserves the right to make changes, without notice, in the products, including circuits, standard cells, and/or software, described or contained herein in order to improve design and/or performance. Philips Semiconductors assumes no responsibility or liability for the use of any of these products, conveys no license or title under any patent, copyright, or mask work right to these products, and makes no representations or warranties that these products are free from patent, copyright, or mask work right infringement, unless otherwise specified. Copyright Philips Electronics North America Corporation 1998 All rights reserved. Printed in U.S.A. Philips Semiconductors 811 East Arques Avenue P.O. Box 3409 Sunnyvale, California 94088-3409 Telephone 800-234-7381 print code Document order number: yyyy mmm dd 10 Date of release: 10-98 9397-750-05102