Optical Encoders SERIES 62F 1/2'' Package, Lighted Shaft FEATURES * Integrated Self-Lighting System for Knob Illumination * 1 Million Rotational Cycles * 1/2" Package * Compatible with CMOS, TTL and HCMOS Logic * Optional Integral Pushbutton * Choices of Cable Length and Terminations * Other Customized Solutions Available APPLICATIONS * Global Positioning/Driver Information Systems * Medical Equipment * Cockpit Controls * Mixing Boards DIMENSIONS In inches (and millimeters) Pin Version .066 .002 .070 (1,68 0,05) (1,78) DIA .219 .003 (5,56 0,08) 62FXX-XX-P XXXX X-X .540 (13,72) .152 .002 (3,86 0,05) .250 (6,35) .250 (6,35) .500 (12,7) .250 .002 (6,35 0,05) DIA. .236 (5,99) GRAYHILL 654321 .250 (6,35) .390 (9,91) .360 (9,14) REF. .375 .015 (9,53 25,42) 3/8-32 UNEF-2A THREAD THREADS TO BE WITHIN .030 (0,76) OF SHOULDER .525 .015 (13,34 0,38) .448 (11,4) .581.010 (14,80,3) GRAYHILL 87654321 With on-board lighting system 62FXX-XX-P-L XXXX X-X .490 (12,45) .460 (11,68) REF .657.015 (16,70,4) .293 (7,4) REF .087(2,21) Cable Version .152 .002 (3,86 0,05) .500 (12,7) .250 .005 (6,35 0,13) .010 (0,25)/ .510 .015 .025 (0,64) (12,95 0,38) PUSH.525 .015 BUTTON (13,34 0,38) TRAVEL .375 .015 (9,52 0,38) .391 (10,0) REF .500 (12,7) .490 (12,45) With on-board lighting system .581.010 (14,80,3) CONNECTOR .100 3/8-32 UNEF-2A THREAD 28 AWG (2,54) IS AMP THREADS TO BE WITHIN CABLE STRIP.030 (0,76) OF SHOULDER WIRES ON P/N 215083-6 PED .050 (1,27) AND CENTERS TINNED GRAYHILL .250 (6,35) .250 (6,35) .320 (8,13) REF .657.015 (16,70,4) Unless otherwise specified, standard tolerance is .010 (0,25). Encoder 24 Grayhill, Inc. * 561 Hillgrove Avenue * LaGrange, Illinois 6 5 4 3 2 1 .540 (13,72 GRAYHILL .250 (6,35) 62FXX-01-XXXC XXXX X-X .390 (9,91) 4.00 .20 (.040 5,08) .312 (7,92) 8 7 6 5 4 3 2 1 .219 .003 (5,56 0,08) .070 .066 .002 (1,78) (1,68 0,05) DIA 62FXX-XX-XXXC-L XXXX X-X Optical and Mechanical Encoders .010 (0,25)/ .025 (0,64) PUSH BUTTON TRAVEL .312 (7,92) Connector Stripped Version Version 60525-5997 * USA * Phone: 708-354-1040 * Fax: 708-354-2820 * www.grayhill.com Optical Encoders CIRCUITRY, TRUTH TABLE, AND WAVEFORM Standard Quadrature 2-Bit Code PIN #s 8 POWER +5 V R* 7 OUTPUT A R* OUTPUT B POWER +5 V (LED) 6 150 5% GROUND NORMALLY OPEN PUSHBUTTON SWITCH OUTPUT A 5 4 OUTPUT B 3 Clockwise Rotation Position Output A Output B HIGH 1 LOW 2 HIGH 3 LOW 4 1 2 2 3 4 5 POSITION NUMBER GROUND * * 6 * * * Indicates logic high; blank indicates logic low. Code repeats every 4 positions. 1 * EXTERNAL PULL-UP RESISTORS REQUIRED FOR OPERATION (2.2k). ** Circuit shown with on-board lighting system. Versions without on-board lighting ** system do not have LED power connections. Refer to standard 62A series for circuitry. SPECIFICATIONS Rating: 5 Vdc, 10 mA, resistive Contact Resistance: less than 10 ohms (TTL or CMOS compatible) Pushbutton Life: 3 million actuations minimum Contact Bounce: less than 4 mS at make and less than 10 mS at break Actuation Force: 500 300 grams Pushbutton Travel: .010/.025 inch Environmental Ratings Switch Ratings Coding: 2-bit quadrature coded output Operating Voltage: 5.0 .25 Vdc Voltage Breakdown: 250 Vac between mutually insulated parts Supply Current: 30 mA maximum Logic Output Characterisitics: Logic High: 3.8 Vdc minimum Logic Low: 0.8 Vdc maximum Rotational Life: 1,000,000 cycles minimum (One cycle is a rotation through all positions and a full return) Minimum Sink Current: 2.0 mA Power Consumption: 150mW maximum Optical Rise and Fall Times: less than 30 mS maximum Operating Temperature Range: -40C to 85C Storage Temperature Range: -55C to 100C Relative Humidity: 90-95% at 40C for 96 hours Vibration Resistance: Harmonic motion with amplitude of 15G's, within a varied 10 to 2000 Hz frequency for 12 hours per MIL-STD-202, Method 204 Mechanical Shock: Test 1: 100G for 6 mS, half sine, 12.3 ft/s; Test 2: 100G for 6 mS, sawtooth, 9.7 ft/s Printed Circuit Boards: NEMA grade FR-4 gold over nickel or palladium Terminals: Brass, tin-plated Mounting Hardware: One brass, nickel-plated nut and stainless steel lockwasher supplied with each switch. Nut is 0.094 inches thick by 0.562 inches across flats Rotor: Thermoplastic Code Housing: Thermoplastic Pushbutton Dome: Stainless steel Dome Retaining Disk: Thermoplastic Pushbutton Housing: Thermoplastic Phototransistor: Planar Silicon NPN Pushbutton Contact: Brass, nickel-plated Flex Cable: 28 AWG, stranded/top coated wire, PVC coated on .050 or .100" centers (cabled version) Header Pins: Phospher bronze, tin-plated Spacer: ABS Backplate/Strain Relief: Stainless steel Lockwasher: Stainless steel Light Pipe: Thermoplastic LED Housing: Thermoplastic Materials and Finishes Code Housing: Reinforced thermoplastic Shaft: Aluminum Bushing: Zinc casting Shaft Retaining Ring: Stainless steel Detent Spring: Stainless steel OPTIONS Contact Grayhill for custom terminations, shaft and bushing configurations, and resolutions. Control knobs are also available. ORDERING INFORMATION Series Angle of Throw: Detent Non-detent 11 = 11.25 or 32 pos. 01 = 11.25 or 32 positions 15 = 15 or 24 positions 05 = 15 or 24 positions 18 = 18 or 20 pos. 08 = 18 or 20 positions 22 = 22.5 or 16 positions 02 = 22.5 or 16 positions Pushbutton Option: 01 = w/o pushbutton, 02 = with pushbutton 62F22-01-040S-L LED: blank = no LED, L = supplied with LED Termination: S = Stripped cable; S-L = Stripped cable, LED; C = Connector; C-L = Connector, LED; P = Pin; P-L = Pin, LED Cable Termination: 040 = 4.0in. Cable is terminated with Amp P/N 215083-6. See Amp Mateability guide for mating connector details. *Eliminate cable length if ordering pins. (Ex: 62A22-02-P) Custom materials, styles, colors, and markings are available. Control knobs available. Available from your local Grayhill Component Distributor. For prices and discounts, contact a local Sales Office, an authorized local Distributor, or Grayhill. Grayhill, Inc. * 561 Hillgrove Avenue * LaGrange, Illinois 60525-5997 * USA * Phone: 708-354-1040 * Fax: 708-354-2820 * www.grayhill.com Encoder 25 Optical and Mechanical Encoders Operating Torque: Detent: 2.0 1.4 in-oz initially Non-detent: less than 1.5 in-oz initially Shaft Push Out Force: 45 lbs minimum Mounting Torque: 15 in-lbs maximum Terminal Strength: 15 lbs cable pull-out force minimum Operating Speed: 100 RPM maximum Axial Shaft Play: .010 maximum Pushbutton Switch Ratings