IDT5V2305 2.5V TO 3.3V HIGH PERFORMANCE CLOCK BUFFER INDUSTRIAL TEMPERATURE RANGE IDT5V2305 2.5V TO 3.3V HIGH PERFORMANCE CLOCK BUFFER FEATURES: DESCRIPTION: * High performance 1:5 clock driver for general purpose applications * Operates up to 170MHz at VDD = 2.5V * Operates up to 200MHz at VDD = 3.3V * Pin-to-pin skew < 75ps at 3.3V operation * VDD range: 2.3V to 3.6V * Output enable glitch suppression * Available in TSSOP and VFQFPN packages The IDT5V2305 is a high performance, low skew clock buffer that operates up to 200MHz. One bank of five outputs provides low skew copies of CLK. Through the use of control pin G, the outputs of bank Y(0:4) can be placed in a low state regardless of CLK input. The device operates in 2.5V and 3.3V environments. The built-in output enable glitch suppression ensures a synchronized output enable sequence to distribute full period clock signals. The IDT5V2305 is characterized for operation from -40C to +85C. FUNCTIONAL BLOCK DIAGRAM 3 G 9 Y0 Control Logic 5 CLK Y1 16 6 11 13 Y2 Y3 Y4 The IDT logo is a registered trademark of Integrated Device Technology, Inc. INDUSTRIAL TEMPERATURE RANGE MAY 2010 1 c 2010 Integrated Device Technology, Inc. DSC 6177/20 IDT5V2305 2.5V TO 3.3V HIGH PERFORMANCE CLOCK BUFFER INDUSTRIAL TEMPERATURE RANGE PIN CONFIGURATION GND 1 CLK VDD 1 16 CLK 16 VDD 2 15 VDD Y0 3 14 GND 4 Y1 VDD 2 15 VDD VDD Y0 3 14 NC 13 Y4 NC 4 13 Y4 5 12 GND Y1 5 12 NC Y2 6 11 Y3 Y2 6 11 Y3 VDD 7 10 VDD VDD 7 10 NC GND 8 9 G GND 8 9 G VDD TSSOP TOP VIEW VFQFPN TOP VIEW CAPACITANCE(TA = +25C, f = 1MHz, VIN = 0V) ABSOLUTE MAXIMUM RATINGS(1) Max Unit Parameter -0.5 to +4.6 V CIN VI Input Voltage(2) -0.5 to VDD +0.5 V VO Output Voltage(2) -0.5 to VDD +0.5 V IIK Input Clamp Current VI < 0 or VI > VDD 50 mA IOK Output Clamp Current VO < 0 or VO > VDD 50 mA IO Continuous Total Output Current VO < 0 to VDD 50 mA Symbol Description VDD Power Supply Voltage TSTG Storage Temperature -65 to +150 Description Input Capacitance Min. Typ. Max. Unit -- 2.5 -- pF VI = 0V or VDD FUNCTION TABLE(1) Inputs C NOTES: 1. Stresses greater than those listed under ABSOLUTE MAXIMUM RATINGS may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for extended periods may affect reliability. 2. Not to exceed 4.6V. CLK Y(0:4) L X L H H H NOTE: 1. H = HIGH Voltage Level L = LOW Voltage Level X = Don't Care 2 Output G IDT5V2305 2.5V TO 3.3V HIGH PERFORMANCE CLOCK BUFFER INDUSTRIAL TEMPERATURE RANGE PIN DESCRIPTION TERMINAL Symbol I/O G I Y(0:4) CLK GND VDD O I PWR Description Output Enable Control for Y(0:4) Outputs. This output enable is active HIGH. If this pin is Logic HIGH, the Y(0:4) clock outputs will follow the input clock (CLK). If this pin is logic LOW, the Y(0:4) outputs will drive low independent of the state of CLK. Buffered Output Clocks Input Reference Frequency Ground DC Power Supply, 2.3V to 3.6V RECOMMENDED OPERATING RANGE Symbol VDD Description Internal Power Supply Voltage VIL Input Voltage LOW VIH Input Voltage HIGH VI IOH Input Voltage Output Current HIGH IOL Output Current LOW TA Ambient Operating Temperature Min. 2.3 VDD = 3V to 3.6V VDD = 2.3V to 2.7V VDD = 3V to 3.6V VDD = 2.3V to 2.7V Typ. 2.5 3.3 Max. Unit V 3.6 0.8 0.7 2 1.7 0 V V VDD -12 -6 12 6 +85 VDD = 3V to 3.6V VDD = 2.3V to 2.7V VDD = 3V to 3.6V VDD = 2.3V to 2.7V -40 V mA mA C DC ELECTRICAL CHARACTERISTICS OVER OPERATING RANGE Symbol VIK IIN IDD Parameter Input Voltage Input Current Static Device Current(1) Test Conditions VDD = 3V, IIN = -18mA VI = 0V or VDD CLK = 0V or VDD, IO = 0mA, VDD = 3.3V Min. Typ. Max - 1.2 5 25 Unit V A A Typ.(1) Max Unit NOTE: 1. For IDD over frequency, see TEST CIRCUIT AND WAVEFORMS. DC ELECTRICAL CHARACTERISTICS - VDD = 3.3V 0.3V Symbol Parameter VOH HIGH level Output Voltage VOL LOW level Output Voltage IOH HIGH level Output Current IOL LOW level Output Current Test Conditions IOH = -100A VDD = Min. to Max. VDD = 3V IOH = -12mA IOH = -6mA IOH = 100A VDD = Min. to Max. VDD = 3V IOH = 12mA IOH = 6mA VO = 1V VDD = 3V VDD = 3.3V VO = 1.65V VDD = 3.6V VO = 3.135V VO = 1.95V VDD = 3V VDD = 3.3V VO = 1.65V VO = 0.4V VDD = 3.6V NOTE: 1. All typical values are at respective nominal VDD. 3 Min. VDD - 0.2 2.1 2.4 V 0.2 0.8 0.55 V -28 -36 mA -14 28 36 mA 14 IDT5V2305 2.5V TO 3.3V HIGH PERFORMANCE CLOCK BUFFER INDUSTRIAL TEMPERATURE RANGE DC ELECTRICAL CHARACTERISTICS - VDD = 2.5V 0.2V Symbol VOH Parameter HIGH level Output Voltage VOL LOW level Output Voltage IOH HIGH level Output Current IOL LOW level Output Current Test Conditions VDD = Min. to Max. IOH = -100A VDD = 2.3V IOH = -6mA VDD = Min. to Max. IOH = 100A VDD = 2.3V IOH = 6mA VO = 1V VDD = 2.3V VDD = 2.5V VO = 1.25V VDD = 2.7V VO = 2.375V VO = 1.2V VDD = 2.3V VDD = 2.5V VO = 1.25V VO = 0.3V VDD = 2.7V Min. VDD - 0.2 1.8 Typ.(1) Max Unit V 0.2 0.55 V -17 -25 mA -10 17 25 mA 10 NOTE: 1. All typical values are at respective nominal VDD. TIMING REQUIREMENTS OVER RECOMMENDED RANGE Symbol fCLK Parameter Clock Frequency Test Conditions VDD = 3V to 3.6V VDD = 2.3V to 2.7V 4 Min. 0 0 Typ. Max 200 170 Unit MHz IDT5V2305 2.5V TO 3.3V HIGH PERFORMANCE CLOCK BUFFER INDUSTRIAL TEMPERATURE RANGE SWITCHING CHARACTERISTICS OVER OPERATING RANGE VDD = 3.3V 0.3V(1) Symbol tPLH tPHL tSK(O)(2) tSK(P) tSK(PP) tR tF tSU tH Parameter CLK to Yx Output Skew, Yx to Yx Pulse Skew Part-to-Part Skew Rise Time Fall Time G before CLK G after CLK Test Conditions f = 0MHz to 200MHz, CL = 25pF VO = 0.4V to 2V(3) VO = 2V to 0.4V(3) V(THRESHOLD) = VDD/2 Min. 1.3 Typ.(1) 0.7 0.7 0.1 0.4 Max 2.6 Unit ns 75 200 500 2.3 2.3 ps ps ps V/ns V/ns ns Max 3 Unit ns 100 350 600 1.625 1.625 ps ps ps V/ns V/ns ns NOTES: 1. All typical values are at respective nominal VDD. 2. This specification is only valid for equal loading of all outputs. 3. Measured at 100MHz. SWITCHING CHARACTERISTICS OVER OPERATING RANGE VDD = 2.5V 0.2V(1) Symbol tPLH tPHL tSK(O)(2) tSK(P) tSK(PP) tR tF tSU tH Parameter CLK to Yx Output Skew, Yx to Yx Pulse Skew Part-to-Part Skew Rise Time Fall Time G before CLK G after CLK Test Conditions f = 0MHz to 170MHz, CL = 25pF VO = 0.4V to 1.7V(3) VO = 1.7V to 0.4V(3) V(THRESHOLD) = VDD/2 NOTES: 1. All typical values are at respective nominal VDD. 2. This specification is only valid for equal loading of all outputs. 3. Measured at 100MHz. 5 Min. 1.5 0.4 0.4 0.1 0.4 Typ.(1) IDT5V2305 2.5V TO 3.3V HIGH PERFORMANCE CLOCK BUFFER INDUSTRIAL TEMPERATURE RANGE OUTPUT ENABLE GLITCH SUPPRESSION CIRCUIT The purpose of the glitch suppression circuitry is to ensure the output enable sequence is synchronized with the clock input such that the output buffer will be enabled on the next full period of the input clock (negative edge triggered by the input clock). The G input must be stable one tEN - time prior to the falling edge of the CLK for predictable operation. CLK Gx tEN tDIS Yx G (tEN, tDIS) Relative to CLK 6 IDT5V2305 2.5V TO 3.3V HIGH PERFORMANCE CLOCK BUFFER INDUSTRIAL TEMPERATURE RANGE TEST CIRCUITS AND WAVEFORMS FROM OUTPUT UNDER TEST 500 CL NOTES: 1. CL includes probe and jig capacitance. 2. All input pulses are supplied by generators having the following characteristics: PRR 200MHz; ZO = 50; tR < 1.2ns; tF < 1.2ns. Test Load Circuit VDD CLK 50% VDD 0V tPLH tPHL VOH 1.7V or 2V Yx 0.4V 50% VDD 0.4V VOL tF tR Voltage Waveforms Propagation Delay Times VDD CLK 0V VOH Any Y 50% VDD VOL VOH 50% VDD Any Y VOL tSK(O) tSK(O) Output Skew VDD CLK 50% VDD 0V tPLH tPHL VOH Yx 50% VDD VOL tSK(P) = tPLH tPHL Pulse Skew 7 IDT5V2305 2.5V TO 3.3V HIGH PERFORMANCE CLOCK BUFFER INDUSTRIAL TEMPERATURE RANGE TEST CIRCUITS AND WAVEFORMS (cont.) Idd vs Frequency 45 40 35 Idd (mA) 30 25 Vdd = 2.5V Vdd = 3.3V 20 15 10 5 0 0 20 40 60 80 100 120 Frequency (MHz) 8 140 160 170 180 200 IDT5V2305 2.5V TO 3.3V HIGH PERFORMANCE CLOCK BUFFER INDUSTRIAL TEMPERATURE RANGE RECOMMENDED LANDING PATTERN 3.80 1.50 3.10 0.50 2.50 2.60 4.30 0.30 2.10 2.60 NR 16 pin NOTE: All dimensions are in millimeters. 9 IDT5V2305 2.5V TO 3.3V HIGH PERFORMANCE CLOCK BUFFER INDUSTRIAL TEMPERATURE RANGE ORDERING INFORMATION Part / Order Number 5V2305PGI 5V2305PGI8 5V2305PGGI 5V2305PGGI8 5V2305NRI 5V2305NRI8 5V2305NRGI 5V2305NRGI8 Shipping Packaging Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Tubes Tape and Reel Package 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin TSSOP 16-pin VFQFPN 16-pin VFQFPN 16-pin VFQFPN 16-pin VFQFPN Temperature -40 to +85 C -40 to +85 C -40 to +85 C -40 to +85 C -40 to +85 C -40 to +85 C -40 to +85 C -40 to +85 C "G" suffix to the part number are the Pb-Free configuration and are RoHS compliant. CORPORATE HEADQUARTERS 6024 Silver Creek Valley Road San Jose, CA 95138 for SALES: 800-345-7015 or 408-284-8200 fax: 408-284-2775 www.idt.com 10 for Tech Support: clockhelp@idt.com