3-terminal Filters
YFF15PC 1005 [0402 inch]* Feed through filter
YFF18PC 1608 [0603 inch]* Feed through filter
YFF18PH 1608 [0603 inch]* Feed through filter (Thickness: 0.8mm)
YFF18PW 1608 [0603 inch]* Feed through filter (Low ESL)
YFF21PC 2012 [0805 inch]* Feed through filter
YFF31PC 3216 [1206 inch]* Feed through filter
* Dimensions Code JIS[EIA]
For Power Line
YFF-P Series
July 2015
EMC Components
(1/9)
20150731 / emc_esr_yff-p_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
3-terminal Filters
For Power Line
FEATURES
Small and high-performance EMC components.
Good attenuation characteristic in a wide band range.
For large current (2A to 4A) applications
APPLICATIONS
For the power line of communication terminal devices, such as a smart phone, and AV and information devices.
PART NUMBER IDENTIFICATION
PACKAGING STYLE AND SPECIFICATIONS
In the case of YFF15PC0G435M, the weight is 0.0015g.
Overview of YFF-P Series
YFF 15 PC 0G 435 M T 0 N
Series
name
L×W
dimensions
Product
internal
code
Rated
voltage Capacitance Tolerance Taping
TDK
internal
code
Reel size Internal
electrode
Ni
Code mm Code VCode pF Code mm
15 1.0×0.5 PC STD 0G 4 104 100,000 M ±20％0ø178
18 1.6×0.8 PH Thickness:
0.8mm
0J 6.3 105 1,000,000
(1.0µF)
9ø330
21 2.0×1.2 1A 10
31 3.2×1.6 PW Low ESL 1C 16 225 2,200,000
(2.2µF)
1E 25
1H 50 226 22,000,000
(22µF)
Type Package quantity (piece/reel) Single weight (g)
ø178 ø330
YFF15PC 10,000 50,000 0.0008
YFF18PC 4,000 10,000 0.0038
YFF18PH 4,000 10,000 0.0051
YFF18PW 4,000 10,000 0.0038
YFF21PC 4,000 10,000 0.0095
YFF31PC 2,000 10,000 0.0342
Conformity to RoHS Directive
Lead-free Compatible
Please contact our Sales office when your application is considered the following:
The device’s failure or malfunction may directly endanger human life (e.g. application for automobile/aircraft/medical/nuclear power devices, etc.)
Conformity to RoHS Directive: This means that, in conformity with EU Directive 2002/95/EC, lead, cadmium, mercury, hexavalent chromium, and specific
bromine-based flame retardants, PBB and PBDE, have not been used, except for exempted applications.
(2/9)
20150731 / emc_esr_yff-p_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
RECOMMENDED SOLDERING CONDITION
REFLOW SOLDERING
HAND SOLDERING
PRECAUTIONS FOR USE
Before soldering, be sure to preheat components. The T pre-
heating temperature must be 150°C max. with attention paid to
thermal shock.
Natural cooling of components in the air is recommended. On
the other hand, when dipping them in a solvent for purposes,
such as cleaning, make sure that the temperature difference
(T) is 100°C.
When performing hand soldering for circuit modification, apply
the soldering iron to the copper foil area of the printed circuit
board for 3 seconds or less. The temperature of the iron tip
should not exceed 300°C.
Use a wrist band to discharge static electricity in your body
through the grounding wire.
When incorporating the printed circuit board on which this prod-
uct is mounted into a frame, etc., do not apply stress to the prod-
uct through local bending of the board by tightening of screws,
etc.
Overview of YFF-P Series
Preheating
Soldering
Slow cooling
(Natural cooling)
60 seconds or more
0
260˚C max.
10s max.
Temperature(˚C)
150˚C max.
Preheating
300
Make as short as possilble (within three seconds)
0
Temperature(˚C)
150˚C max.
(3/9)
20150731 / emc_esr_yff-p_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
SHAPES AND DIMENSIONS RECOMMENDED LAND PATTERN
* Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between
them is the shortest.
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
The part numbers are TDK’s standard specification products.
: Please specify reel size code, 0 (ø178) or 9 (ø330)
ELECTRICAL CHARACTERISTICS GRAPH
INSERTION LOSS vs. FREQUENCY CHARACTERISTICS RATED CURRENT vs. TEMPERATURE CHARACTERISTICS
(DERATING)
YFF-P Series
YFF15PC Type(Feed Through Filter)
Part No. L W T
YFF15PC0G435MT00 N 1.05±0.05 0.65±0.05 0.45±0.05
YFF15PC0G105MT00 N 1.00±0.05 0.55±0.05 0.30±0.05
YFF15PC0J474MT00 N 1.00±0.05 0.55±0.05 0.30±0.05
YFF15PC1A224MT00 N 1.00±0.05 0.55±0.05 0.30±0.05
YFF15PC1C104MT00 N 1.00±0.05 0.55±0.05 0.30±0.05
Insertion loss
40dB bandwidth
(MHz)
Rated voltage
Edc
(V)
Rated current
Idc
(A)
Operating
temperature range
(°C)
Storage temperature
range(After mount)
(°C)
Part No.
0.2 to 1000 4 2 –55 to 85 –55 to 85 YFF15PC0G435MT00□N
0.8 to 1000 43–55 to 105 –55 to 105 YFF15PC0G105MT00□N
2 to 1000 6.3 3 –55 to 105 –55 to 105 YFF15PC0J474MT00□N
4 to 1000 10 3–55 to 105 –55 to 105 YFF15PC1A224MT00□N
9 to 1000 16 3 –55 to 105 –55 to 105 YFF15PC1C104MT00□N
0.30
±
0.10
L
2
GND
GND
4
1
IN/OUT
3
OUT/IN
W
0.09min.
T
0.700.30
0.19
0.60
0.25 0.25
Land pattern+Solder resist
Land pattern
Dimensions in mm
0
10
20
30
40
50
60
70
80
900.1 1 10 100 1000 10000
Frequency(MHz)
Insertion loss(dB)
0G105
0J474
1A224
1C104
0G435
–55 –35 –15 5 25 45 65 85 105 125
Ambient temperature(°C)
0
1
2
3
4
5
Rated current(A)
1C104, 1A224, 0J474, 0G105
0G435
(4/9)
20150731 / emc_esr_yff-p_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
SHAPES AND DIMENSIONS RECOMMENDED LAND PATTERN
* Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between
them is the shortest.
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
The part numbers are TDK’s standard specification products.
: Please specify reel size code, 0 (ø178) or 9 (ø330)
ELECTRICAL CHARACTERISTICS GRAPH
INSERTION LOSS vs. FREQUENCY CHARACTERISTICS RATED CURRENT vs. TEMPERATURE CHARACTERISTICS
(DERATING)
YFF-P Series
YFF18PC Type(Feed Through Filter)
Insertion loss
40dB bandwidth
(MHz)
Rated voltage
Edc
(V)
Rated current
Idc
(A)
Operating
temperature range
(°C)
Storage temperature
range(After mount)
(°C)
Part No.
0.2 to 1000 6.3 4 –55 to 85 –55 to 85 YFF18PC0J475MT0H□N
0.8 to 1000 6.3 4–55 to 105 –55 to 105 YFF18PC0J105MT0H□N
2 to 1000 6.3 4 –55 to 125 –55 to 125 YFF18PC0J474MT0H□N
3 to 1000 6.3 4–55 to 125 –55 to 125 YFF18PC0J224MT0H□N
7 to 1000 16 4 –55 to 125 –55 to 125 YFF18PC1C104MT0H□N
0.40
±
0.10
1.60
±
0.20
0.80±0.10
0.10min.
0.60±0.10
2
GND
GND
4
1
IN/OUT
3
OUT/IN
1.000.60
0.40
0.60
0.400.40
Land pattern+Solder resist
Land pattern
Dimensions in mm
0
10
20
30
40
50
60
70
80
900.1 1 10 100 1000 10000
Frequency(MHz)
Insertion loss(dB)
0J105
0J474
0J224
1C104
0J475
–55 –35 –15 5 25 45 65 85 105 125
Ambient temperature(°C)
0
1
2
3
4
5
Rated current(A)
1C104, 0J224, 0J474
0J105
0J475
(5/9)
20150731 / emc_esr_yff-p_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
SHAPES AND DIMENSIONS RECOMMENDED LAND PATTERN
* Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between
them is the shortest.
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
The part numbers are TDK’s standard specification products.
: Please specify reel size code, 0 (ø178) or 9 (ø330)
ELECTRICAL CHARACTERISTICS GRAPH
INSERTION LOSS vs. FREQUENCY CHARACTERISTICS RATED CURRENT vs. TEMPERATURE CHARACTERISTICS
(DERATING)
YFF-P Series
YFF18PH Type(Feed Through Filter)
Insertion loss
40dB bandwidth
(MHz)
Rated voltage
Edc
(V)
Rated current
Idc
(A)
Operating
temperature range
(°C)
Storage temperature
range(After mount)
(°C)
Part No.
0.4 to 1000 6.3 4 –55 to 85 –55 to 85 YFF18PH0J225MT00□N
0.8 to 1000 6.3 4–55 to 105 –55 to 105 YFF18PH0J105MT00□N
0.80±0.10
0.40
±
0.10
1.60
±
0.20
0.80±0.10
0.10min.
2
GND
GND
4
1
IN/OUT
3
OUT/IN
1.000.60
0.40
0.60
0.400.40
Land pattern+Solder resist
Land pattern
Dimensions in mm
0
10
20
30
40
50
60
70
80
900.1 1 10 100 1000 10000
Frequency(MHz)
Insertion loss(dB)
0J105
0J225
–55 –35 –15 5 25 45 65 85 105 125
Ambient temperature(°C)
0
1
2
3
4
5
Rated current(A)
0J105
0J225
(6/9)
20150731 / emc_esr_yff-p_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
SHAPES AND DIMENSIONS RECOMMENDED LAND PATTERN
* Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between
them is the shortest.
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
The part numbers are TDK’s standard specification products.
: Please specify reel size code, 0 (ø178) or 9 (ø330)
ELECTRICAL CHARACTERISTICS GRAPH
INSERTION LOSS vs. FREQUENCY CHARACTERISTICS
RATED CURRENT vs. TEMPERATURE CHARACTERISTICS
(DERATING)
YFF-P Series
YFF18PW Type(Feed Through Filter)
Insertion loss
40dB bandwidth
(MHz)
Rated voltage
Edc
(V)
Rated current
Idc
(A)
Operating
temperature range
(°C)
Storage temperature
range(After mount)
(°C)
Part No.
0.2 to 2000 6.3 4 –55 to 85 –55 to 85 YFF18PW0J475MT0H□N
0.8 to 2000 6.3 4–55 to 105 –55 to 105 YFF18PW0J105MT0H□N
2 to 2000 6.3 4 –55 to 125 –55 to 125 YFF18PW0J474MT0H□N
0.400.40
1.200.40
0.80
0.40
Land pattern+Solder resist
Land pattern
Dimensions in mm
0
10
20
30
40
50
60
70
80
900.1 1 10 100 1000 10000
Frequency(MHz)
Insertion loss(dB)
0J475
0J474
0J105
–55 –35 –15 5 25 45 65 85 105 125
Ambient temperature(°C)
0
1
2
3
4
5
Rated current(A)
0J105
0J475
0J474
(7/9)
20150731 / emc_esr_yff-p_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
SHAPES AND DIMENSIONS RECOMMENDED LAND PATTERN
* Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between
them is the shortest.
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
The part numbers are TDK’s standard specification products.
: Please specify reel size code, 0 (ø178) or 9 (ø330)
ELECTRICAL CHARACTERISTICS GRAPH
INSERTION LOSS vs. FREQUENCY CHARACTERISTICS
YFF-P Series
YFF21PC Type(Feed Through Filter)
Insertion loss
40dB bandwidth
(MHz)
Rated voltage
Edc
(V)
Rated current
Idc
(A)
Operating
temperature range
(°C)
Storage temperature
range(After mount)
(°C)
Part No.
0.04 to 1000 6.3 4 –55 to 85 –55 to 85 YFF21PC0J226MT00□N
0.08 to 1000 6.3 4–55 to 85 –55 to 85 YFF21PC0J106MT00□N
0.2 to 1000 10 3 –55 to 85 –55 to 85 YFF21PC1A475MT00□N
0.3 to 1000 10 2–55 to 85 –55 to 85 YFF21PC1A225MT00□N
0.7 to 1000 10 4 –55 to 85 –55 to 85 YFF21PC1A105MT00□N
2 to 1000 16 2–55 to 125 –55 to 125 YFF21PC1C474MT00□N
7 to 1000 25 2 –55 to 125 –55 to 125 YFF21PC1E104MT00□N
0.45
±
0.15
2.00
±
0.20
1.25±0.20
0.20
min.
0.85±0.15
2
GND
GND
4
1
IN/OUT
3
OUT/IN
1.400.60
0.50
0.80
0.60 0.65
Land pattern+Solder resist
Land pattern
Dimensions in mm
0
10
20
30
40
50
60
70
80
900.1 1 10 100 1000 10000
Frequency(MHz)
Insertion loss(dB)
1A225
1C474
1E104
1A105
1A475
0J106
0J226
(8/9)
20150731 / emc_esr_yff-p_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
SHAPES AND DIMENSIONS RECOMMENDED LAND PATTERN
* Make sure to connect the GND terminal of this product and the GND of the mounting circuit board by using through holes so that the distance between
them is the shortest.
ELECTRICAL CHARACTERISTICS
CHARACTERISTICS SPECIFICATION TABLE
The part numbers are TDK’s standard specification products.
: Please specify reel size code, 0 (ø178) or 9 (ø330)
ELECTRICAL CHARACTERISTICS GRAPH
INSERTION LOSS vs. FREQUENCY CHARACTERISTICS
YFF-P Series
YFF31PC Type(Feed Through Filter)
Insertion loss
40dB bandwidth
(MHz)
Rated voltage
Edc
(V)
Rated current
Idc
(A)
Operating
temperature range
(°C)
Storage temperature
range(After mount)
(°C)
Part No.
0.04 to 1000 6.3 4 –55 to 85 –55 to 85 YFF31PC0J226MT00□N
0.7 to 1000 16 2–55 to 125 –55 to 125 YFF31PC1C105MT00□N
2 to 1000 16 2 –55 to 125 –55 to 125 YFF31PC1C474MT00□N
3 to 600 16 2–55 to 125 –55 to 125 YFF31PC1C224MT00□N
7 to 1000 16 2 –55 to 125 –55 to 125 YFF31PC1C104MT00□N
0.95
±
0.25 0.40
±
0.30
3.20
±
0.20
1.60±0.201.30±0.20
2
GND
GND
4
1
IN/OUT
3
OUT/IN
2.501.20
1.40
1.30
0.80 0.90
Land pattern+Solder resist
Land pattern
Dimensions in mm
0
10
20
30
40
50
60
70
80
900.1 1 10 100 1000 10000
Frequency(MHz)
Insertion loss(dB)
1C105
1C224
1C104
1C474
0J226
(9/9)
20150731 / emc_esr_yff-p_en.fm
Please be sure to request delivery specifications that provide further details on the features and specifications of the products for proper and safe use.
Please note that the contents may change without any prior notice due to reasons such as upgrading.
EMC Components
REEL DIMENSIONS
Dimensions in mm
TAPE DIMENSIONS
Paper tape
Dimensions in mm
Applies to YFF15PC0G435M
Plastic tape
Dimensions in mm
YFF-P Series Packing Style
Reel A B C D E W t r
ø178 ø178±2.0 ø60±2.0 ø13±0.5 ø21±0.8 2.0±0.5 9.0±0.3 2.0±0.05 1.0
ø330 ø382 max.(ø330 nom.) ø50 min. ø13±0.5 ø21±0.8 2.0±0.5 10.0±1.5 2.0±0.05 1.0
Ty p e A B C D E F G H J t
YFF15PC 0.62 typ.
(0.75 typ.)
1.12 typ.
(1.18 typ.)8.0±0.3 3.5±0.05 1.75±0.1 2.0±0.05 2.0±0.05 4.0±0.1 ø1.5+0.1/–0 0.7 max.
YFF18PC
1.10 typ. 1.90 typ. 8.0±0.3 3.5±0.05 1.75±0.1 4.0±0.1 2.0±0.05 4.0±0.1 ø1.5+0.1/–0 1.1 max.YFF18PH
YFF18PW
YFF21PC 1.50 typ. 2.30 typ. 8.0±0.3 3.5±0.05 1.75±0.1 4.0±0.1 2.0±0.05 4.0±0.1 ø1.5+0.1/–0 1.1 max.
A
C
E
D
r
B
Wt
ED
C
B
Round sprocket holes Square punch hole for component mountingJ
tAHGF
Ty p e A B C D E F G H J K t Q
YFF31PC 1.90 typ. 3.50 typ. 8.0±0.3 3.5±0.05 1.75±0.1 4.00±0.1 2.0±0.05 4.00±0.1 ø1.5+0.1/–0 2.50 max. 0.30 max. ø0.50 max.
ED
C
B
Round sprocket holes Square punch hole for component mountingJ
t
K
AHGF Q