D-Sub DIN 41 652 * CECC 75 301-802 * IEC 60 807 Number of contacts Mounting height Low -Pr 9--37 50 ofil eV ers ion Stamped solder pins, angled with grounding board locks No. of contacts Identification Performance levels Explanations see page 05.04 Other contact surfaces on request Part No. Performance level Performance level 3 2 Male connector D-Sub metal shell with dimples 9 15 25 37 09 65 162 781 09 65 262 781 09 65 362 781 09 65 462 781 . . . . 09 65 162 681 09 65 262 681 09 65 362 681 09 65 462 681 . . . . 9 15 25 37 50 09 66 152 761 09 66 252 761 09 66 352 761 09 66 452 761 09 66 552 761 . . . . . 09 66 152 661 09 66 252 661 09 66 352 661 09 66 452 661 09 66 552 661 . . . . . Female connector metal shell Please insert digit for flange thread or fitted female screw locks M3 4-40 UNC fitted screw locks 4-40 UNC 05 20 1) Not normally kept in stock 5 6 7 1) 1) s D-Sub DIN 41 652 * CECC 75 301-802 * IEC 60 807 Number of contacts Mounting height Low -Pr 9--37 50 ofil eV ers ion s Stamped solder pins, angled with grounding board locks Identification Drawing Dimensions in mm Male connector Mating face acc. to: DIN 41 652 * CECC 75 301-802 IEC 60 807 X No. 1 contact fitted screw locks 4 - 40 UNC D-Sub Nut thread M3 or 4 - 40 UNC 9-37 Female connector 50 Mating face acc. to: DIN 41 652 * CECC 75 301-802 IEC 60 807 No. 1 contact X 9-37 Grounding board lock 0.2 x 0.6 X 50 9-37 Board drillings a 50 b0.1 c f 9 30.90 25.00 12.50 2.74 15 39.20 33.30 12.50 2.74 25 53.10 47.00 12.50 2.76 37 69.40 63.50 12.50 2.76 50 67.00 61.10 15.40 2.76 05 21 Mating conditions see page 05.04 Mounting details see page 05.24