ALUMINUM ELECTROLYTIC CAPACITORS HZ Ultra Low Impedance, For PC motherboard series Lower impedance than HN series. Compliant to the RoHS directive (2002/95/EC). HZ Low Impedance HN Specifications ltem Performance Characteristics Category Temperature -25 to +105C Rated Voltage Range 6.3 to 16V Rated Capacitance Range 470 to 3300F Capacitance Tolerance 20% (120Hz, 20C) Leakage Current After 2 minutes' application of rated voltage, leakage current is less than 0.03CV For capacitance of more than 1000F, add 0.02 for every increase of 1000F Tangent of loss angle (tan ) Rated voltage (V) 6.3 10 16 Stability at Low Temperature tan (MAX.) Rated voltage (V) 0.22 6.3 0.19 10 0.16 16 Impedance ratio ZT / Z20 (MAX.) Z--25C / Z+20C 3 3 3 Endurance The specifications listed at right shall be met when the capacitors are restored to 20 C after D.C. bias plus rated ripple current is applied for 2000 hours at 105C, the peak voltage shall not exceed the rated voltage. Marking Printed with gold color letter on black sleeve. 120Hz 20C 120Hz Within 30% of the initial capacitance value 200% or less than the initial specified value Less than or equal to the initial specified value Capacitance change tan Leakage current Radial Lead Type Type numbering system (Example : 6.3V 1800F) 1 d Sleeve (P.E.T.) 2 3 4 5 6 7 8 9 10 11 12 UH Z 0 J 1 8 2 MPM P 0.5 D+0.5 MAX. Size code Configuration Capacitance tolerance ( 20%) Rated capacitance (1800F) L+1.5MAX. 15MIN Rated voltage (6.3V) 4MIN Pressure relief vent (mm) D 8 10 Series name P 3.5 5.0 Type d 0.6 0.6 Configuration D Pb-free leadwire Pb-free PET sleeve 8 10 PM Standard Ratings V (Code) Cap. (F) 470 Item Co de Case size D x L (mm) 6.3 (0J) Impedance Rated ripple (m) MAX. (mArms) 20C / 100kHz 105C / 100kHz Case size D x L (mm) 10 (1A) Impedance Rated ripple (m) MAX. (mArms) 20C / 100kHz 105C / 100kHz 471 680 681 820 821 8 x 15 14 2210 1000 102 10 x 12.5 12 2280 1200 122 1500 152 1800 182 2200 222 2700 3300 272 332 8 x 15 10 x 12.5 8 x 20 10 x 16 10 x 16 8 x 20 10 x 16 10 x 20 10 x 20 10 x 25 14 12 9 10 10 9 10 7 7 6.5 2210 2280 2880 2960 2960 2880 2960 3770 3770 4690 Please refer to page 20, 21, 22 about the formed or taped product spec. Please refer to page 4 for the minimum order quantity. 10 x 12.5 12 2288 10 x 12.5 10 x 12.5 10 x 16 8 x 20 10 x 16 10 x 16 12 12 10 9 10 10 2280 2280 2960 2880 2960 2960 8 x 20 9 2880 10 x 20 7 3770 10 x 25 6.5 4140 16 (1C) Impedance Case size Rated ripple (m) MAX. D x L (mArms) 20C / 100kHz 105C / 100kHz (mm) 10x 12.5 12 2280 10x 12.5 12 2280 8x 20 9 2880 10x 16 10 2960 10x 16 10 2960 10x 16 10 2960 8x 20 9 2880 10x 20 7 3770 10x 20 7 3770 10x 20 7 3770 10x 25 6.5 4140 : In this case, n will be put at 12th digit of type numbering system. : In this case, c will be put at 12th digit of type numbering system. : In this case, . will be put at 12th digit of type numbering system. CAT.8100Z