In This Section…
F-1
www.tnb.com
United States
Tel: 901.252.8000
Fax: 901.252.1354
Canada
Tel: 450.347.5318
Fax: 450.347.1976
Customer Service
Tel: 800.816.7809
Technical Services
Tel: 888.862.3289
Metal Framing, Pipe Hangers and Accessories
Superstrut®Metal Framing,Pipe Hangers and Accessories
Metal Framing Channels — Overview .............................F-2–F-7
Threaded Products and Hardware..................................F-8–F-13
Fittings and Brackets...................................................F-14–F-21
Concrete Inserts ..........................................................F-22–F-23
Beam Clamps ..............................................................F-24–F-32
Pipe Straps, Conduit Clamps and Hangers...................F-33–F-84
Surface Raceway and Lighting Systems ......................F-85–F-89
Special Metals .............................................................F-90–F-99
Slotted Angle Metal Framing....................................F-100–F-101
Metal Framing Engineering Data..............................F-102–F-123
tnb07_gm102_F_intro 1/19/08 11:53 AM Page F-1
Metal Framing Channels — Overview
Metal Framing, Pipe Hangers and Accessories
F-2
Thomas & Betts is proud to introduce the new and improved
Trivalent Galv-Krom®finish. Galv-Krom®finish is a combination
of .5 mils electro-plated Zinc and a gold Trivalent Chromium finish.
New Trivalent Galv-Krom®Finish Is RoHS Compliant
•Gold Trivalent Chromium Finish — The new Galv-Krom®finish
features a Trivalent Chromium formulation that provides all the
features and protection of Hexavalent Chromium (CR VI) without
the use of this chemical. Hexavalent Chromium is a substance
that is restricted by some standards such as the European Union
directive on the restriction of the use of certain hazardous
substances in electrical and electronic equipment (RoHS).
•RoHS Compliant — One great feature for the new Trivalent
Chromium formulation is RoHS compliance. Because Hexavalent
Chromium is a substance that is restricted by RoHS, moving away from
a Hexavalent formulation to the new Trivalent formulationwill make the
performance of Galv-Krom®coating available to customers affected by RoHS
and other standards like RoHS around the world.
•Trivalent Galv-Krom®Finish Is OSHA Safe — As mentioned previously, the Hexavalent formulation of the Galv-Krom®finish
was safe with regard to the revised 2006 OSHA standard. This new Trivalent formulation of the Galv-Krom®finish does not
contain any Hexavalent Chromium and therefore does not fall under the scope of the OSHA standard at all. As a result, the
new Trivalent Galv-Krom®finish, just like the Hexavalent Galv-Krom®finish, is OSHA compliant.
•ASTM B633 Specification — The improved Galv-Krom®finish is applied in compliance with ASTM B633 coating, the same
standard as used previously. This standard outlines electrodeposited coatings of zinc on steel.
tnb07_gm102_F_02_03 1/18/08 5:04 PM Page F-2
Metal Framing Channels — Overview
A-3
F-3
Copper Plated (“T” inserted as the second digit
of the part number; Example: CTL-710-2)
Plain steel proceeds through a series of rinse tanks to clean the material
surface. Once cleaned, the fabricated part is etched by dipping into an
acid pickle bath to prepare the surface for adhesion. Copper is electrically
applied by submerging in a copper bath. To seal the finish, the product
continues to a sealer tank and is then dried by forced hot air.
Black (Suffix B)
A black finish is raw steel with only a light oil finish as supplied
by the steel manufacturer. There is no protection against red rust.
Stainless Steel (Suffix SS)
Superstrut channel is supplied in type 304 stainless steel when
required. Type 316 stainless steel may be available upon request.
Aluminum (Suffix AL)
Superstrut channel and hardware are available in aluminum.
Warning:
Load tables, charts, and design criteria provided in this catalog
are intended as guides only. Selection of proper product, installation
intervals, erection, and placement are the responsibility of the user.
Superstrut®products are intended to be used for the support and bracing
of fixtures, cable, pipe and conduit. Improper use or installation may result
in injury to persons or damage of property.
We reserve the right to change material and finish specifications without notice.
GoldGalv
®
The standard GoldGalv®finish is made up of a multi-step electrogalvanizing
and zinc dichromate process. The trivalent Chromium finish is applied over the
zinc, producing a chemically bonded non-porous barrier for protection from
moisture and air. The .5 mil electro-plated zinc and gold trivalent Chromium
finish provide all of the features and protection of hexavalent Chromium
without the use of the chemical.
Green or White Urethane Powder Coated (Suffix GR or WH)
Urethane powder resins are applied electrostatically to the steel after
fabrication. Once the material is completely covered with the powder-form
urethane, it proceeds through a 400˚ baking process for ten minutes,
creating a chemical bond. This results in a minimum of 1.5 mil thickness
of urethane coating providing excellent resistance to chipping or peeling.
Pregalvanized (Suffix PG)
A zinc coating is applied by hot-dipping the steel coil at the mill prior to
fabrication. Once the material is worked by roll-forming, cutting or punching,
minimal protection is provided for raw edges. This weakness is typical with
precoated material and affects the channel section around holes, extreme
ends and the edges of the “U” shape lips. Superstrut pregalvanized
material is in conformance with ASTM A-525/G-90 specification standards,
representing 0.90 ounces of zinc per square foot of steel. This finish is
often referred to as “hot-dipped mill galvanized” or “mill galvanized.”
Hot-Dipped Galvanized (Suffix HDG)
The material is zinc coated after fabrication providing total product protection
on all surfaces. The fabricated channel or fitting is suspended and then
dipped into tanks of hot zinc for a prolonged period, creating a coherent
bond. The result is superior corrosion resistance as compared to pre-
galvanized material. Hot-dipped galvanizing is not recommended for
threaded products, considering the zinc coating thickness will often
disrupt the threads. Superstrut hot-dipped galvanized is in conformance
with ASTM Specifications A-123 (formerly A-386) and A-153. Superstrut
channels maintain a minimum 1.5 ounces of zinc per square foot of steel
or 2.5 mils (ASTM A-123, Thickness Grade 65). This finish is also referred
to as ”hot-dipped galvanized after fabrication.”
SilverGalv
®
(Suffix EG)
Often referred to as “zinc plated” or “electroplated zinc,” the steel and
.5 mils of zinc are bonded by an electrolysis process. This is the identical
process used in the Kindorf Galv-Krom®finish without the numerous benefits
of the gold colored trivalent chromium conversion coat (see Galv-Krom®
finish for more information). Electrogalvanizing is most commonly applied
to small fittings, hardware and threaded products.
PVC Coated (Suffix PVC)
A polyvinyl chloride (PVC) plastic coating is fused to the channel, fitting
or accessory after fabrication by immersing the part in fluidized PVC tanks.
The fused-melt mixed powder PVC coating thickness is15 mils (.015") plus
or minus five mils. PVC material is a thermoplastic and will soften in high
temperature. An inherent weakness with PVC coatings occurs when field
alterations are applied, such as cutting or drilling. These acts disrupt the
sealed PVC product and warrant field touch-up. Thomas & Betts cannot
be held responsible for field-altered PVC coated products.
Finishes
Metal Framing, Pipe Hangers and Accessories
tnb07_gm102_F_02_03 1/18/08 5:04 PM Page F-3
Metal Framing, Pipe Hangers and Accessories
F-4
Metal Framing Channels — Overview
“Soak Degreasing”
Chemical solution
removes bulk of oil and
grease buildup.
“Electro Cleaner”
The metal is
negatively charged
to remove minute surface
particles.
“Rinse”
Live, clear water rinse.
“Sulfuric Acid Bath”
Prepares the metal by
etching the surface for the
zinc application.
“Rinse”
Live, clear water rinse.
“Zinc Tank”
Electrically applies
the zinc metal
coating.
“Rinse”
Chemically treated rinse
water.
“Rinse”
Live, clear water rinse.
“Rinse”
Live, clear water rinse.
“Chromate Dip”
A yellow dichromate
conversion coat is applied
to the zinc.
“Rinse”
Live, clear water rinse.
“Dryer”
Hot air is forced
around strut until dry.
GoldGalv®
The standard GoldGalv®finish is made up of a
multi-step electrogalvanizing and zinc dichromate
process. The trivalent Chromium finish is applied
over the zinc, producing a chemically bonded
non-porous barrier for protection from moisture
and air. The .5 mil electro-plated zinc and gold
trivalent Chromium finish provide all of the
features and protection of hexavalent Chromium
without the use of the chemical.
(Refer to page E-5 for more details).
Formed Hot Rolled Steel
Electro Plated
Zinc Coating
Yellow Dichromate
Conversion Coat
Finishes
(continued)
tnb07_gm102_F_04_05 1/18/08 9:35 AM Page F-4
Metal Framing, Pipe Hangers and Accessories
A-3
F-5
Metal Framing Channels — Overview
•Strong Abrasion Resistance
SilverGalv™provides strong abrasion resistance, even under extreme
conditions, thanks to its unique zinc finish and chromate barrier. The
green paint finishes typically used for strut cannot compare to this
level of protection
•Clean Finish
SilverGalv™ensures a finished product that leaves no residue on
your hands. In the SilverGalv™process, a zinc finish is applied after
fabrication. As a result, all the oil and grime that accumulates during
manufacturing gets thoroughly cleaned off during the plating process
•Paintable Surface
Applying SilverGalv™after fabrication provides the end user
with a clean, smooth surface to paint
•Interchangeable Silver Color
SilverGalv’s silver hue means it can be used interchangeably with
either standard pre-galvanized channel systems or silver colored
fittings commonly used with green painted strut systems
•No More White Rust
With pre-galvanized strut, white rust frequently taints the zinc finish.
With SilverGalv™, this problem is eliminated thanks to a clear
chromate applied over the zinc that stops white rust from forming
•Punched Holes and Cut Ends are Protected
Unlike a pre-galvanized finish where steel holes and cuts have no
corrosion protection, Silver-Galv™protects every portion of the strut.
Because SilverGalv’s finish is applied after fabrication, all punched
holes and cut ends share a consistent quality with the rest of the
material
SilverGalv
™
provides more corrosion protection than
Pre-Galvanized or Green Painted finishes.
Finishes
(continued)
Standard Channels
Material
Channels are cold formed from hot rolled pickled and oiled strip steel.
Material Thickness
All Series 1200 12 gauge material
All Series 1400 14 gauge material
Standard Lengths
Standard lengths for channel are 10 ft. and 20 ft.
Standard length tolerance ± 1⁄8".
Shorter lengths are available at a small cutting charge.
GoldGalv®hardware finish is standard for all Superstrut
products. This is a multi-process finish of electro-plated
zinc, followed by gold colored zinc dichromate to give
excellent corrosion resistance and superior paint base.
See page F-3 for a complete description of the GoldGalv®
hardware finish. GoldGalv®hardware will be furnished if no
other finish is specified. A Series B Series C Series E Series H Series
SilverGalv™
Electro-Galvanized Finish From Superstrut®
Protection is the name of the game and SilverGalv™delivers a winning combination of features designed to meet the most exacting specifications.
SilverGalv™offers the ultimate in corrosion protection versatility and performance, including…
600
500
400
300
200
100
0
Salt Spray Hours
Pre-Galvanized
SilverGalv™
Green Painted
ASTM B117
Salt Spray Test Results
1
5
⁄
8
1
5
⁄
8
1
5
⁄
8
1
5
⁄
8
1
5
⁄
8
7
⁄
8
7
⁄
8
7
⁄
8
7
⁄
8
7
⁄
8
3
1
⁄
4
2
7
⁄
16
1
3
⁄
8
13
⁄
16
1
5
⁄
8
tnb07_gm102_F_04_05 1/18/08 9:35 AM Page F-5
Metal Framing Channels — Overview
Metal Framing, Pipe Hangers and Accessories
F-6
B-1400
Channel available in Solid, Half Slot, Punched
and Slotted configurations.
Wt./Ft. 0.90 lbs.
E-1200
Channel available in Solid, Half Slot and Punched
configurations.
Wt./Ft. 2.47 lbs.
H-1200
Channel available in Solid, Half Slot and
Punched configurations.
Wt./Ft. 3.05 lbs.
A-1400
Channel available in Solid, Half Slot, Punched, Slotted and
Knockout configurations.
Wt./Ft. 1.40 lbs.
A-1200
Channel available in Solid, Half Slot, Punched,
Slotted and Knockout configurations.
Wt./Ft. 1.90 lbs.
B-1200
Channel available in Solid, Half Slot, Punched
and Slotted configurations.
Wt./Ft. 1.28 lbs.
C-1200
Channel available in Solid, Half Slot and Punched
configurations.
Wt./Ft. 1.70 lbs.
1
5
⁄
8
1
5
⁄
8
1
5
⁄
8
1
5
⁄
8
1
5
⁄
8
1
5
⁄
8
1
5
⁄
8
1
5
⁄
8
7
⁄
8
7
⁄
8
7
⁄
8
7
⁄
8
7
⁄
8
7
⁄
8
7
⁄
8
9
⁄
32
3
⁄
8
9
⁄
32
9
⁄
32
9
⁄
32
9
⁄
32
9
⁄
32
9
⁄
32
13
⁄
16
1
3
⁄
8
1
5
⁄
8
12
ga
12
ga
12
ga
13
⁄
16
tnb07_gm102_F_06_07 1/18/08 9:36 AM Page F-6
Metal Framing Channels
Metal Framing, Pipe Hangers and Accessories
A-3
F-7
Half Slot Channel
CAT.
STD.
NO.
DIM. GA. CTN.
A-1200-HS 15⁄8x 15⁄812 *
B-1200-HS 15⁄8x 13⁄16 12 *
C-1200-HS 15⁄8x 13⁄812 500
E-1200-HS 15⁄8x 27⁄16 12 500
H-1200-HS 15⁄8x 31⁄412 *
A-1400-HS 15⁄8x 15⁄814 *
B-1400-HS 15⁄8x 13⁄16 14 500
9
⁄
16
" x 1
1
⁄
8
" slots on 2" centers.
* Standard lengths 10 ft. and 20 ft. for standard
cartons. Please consult your local
T&B representative.
2"
1
7
⁄
8
"
CAT.
STD.
NO.
DIM. GA. CTN.
A-1200-P 15⁄8x 15⁄812 500
B-1200-P 15⁄8x 13⁄16 12 500
H-1200-P 15⁄8x 13⁄16 12 500
A-1400-P 15⁄8x 11⁄214 500
B-1400-P 15⁄8x 13⁄16 14 500
9
⁄
16
" holes on 1
7
⁄
8
" centers.
Available in 10 & 20 ft. lengths.
Superstrut Channels —
Welding Combinations
All Superstrut Channels are available in a variety of
combinations —some are shown here.
Multiple channels are spot welded on 3" centers.
2* 2-A 2-B
2-C
3-D
3-C
3-A 3-B
4
Hole Configurations
CAT.
STD.
NO.
DIM. GA. CTN.
A-1200-S 15⁄8x 15⁄812 *
B-1200-S 15⁄8x 13⁄16 12 *
A-1400-S 15⁄8x 15⁄814 *
B-1400-S 15⁄8x 13⁄16 14 *
7
⁄
16
" x 3" slots on 4" centers.
* Standard lengths 10 ft. and 20 ft. for standard carton.
Please consult your local T&B representative.
CAT.
STD.
NO.
DIM. GA. CTN.
A-1200-KO 15⁄8x 15⁄812 *
A-1400-KO 15⁄8x 15⁄814 *
KO for
1
⁄
2
" conduit.
Please consult your local T&B representative.
Standard Finish – GoldGalv
®
brand.
4"
6"
Channel with Knockouts
Punched Channel
Slotted Channel
How to Order
10 and 20 ft. lengths — steel. Special lengths may be ordered.
Replace the 3 last digits of the regular channel catalog number with the
designation of the desired combination.
EXAMPLES:
Two A-1200 channels back to back are ordered as A-1202.
Two A-1200 channels back to side are ordered as A-1202-C.
Specify desired finish or material.
*“A” and “B” Series back-to-back combinations are joined using
Thomas & Betts’ steel rivet joining process. The riveted channel is
offered in standard GoldGalv®, stainless steel, painted, pre-galvanized
and hot-dip galvanized finishes.
tnb07_gm102_F_06_07 1/18/08 9:37 AM Page F-7
Threaded Products & Hardware
Metal Framing, Pipe Hangers and Accessories
F-8
CAT.
DESIGN STD.
NO.
DESCRIPTION SIZE LOAD LBS. CTN.
H 122 1/4 1⁄4" Galv-Krom®1⁄4" 150 50
H 122 3/8 3⁄8" Galv-Krom®3⁄8" 590 50
H 122 1/2 1⁄2" Galv-Krom®1⁄2" 1,080 50
H 122 1/4 EG 1⁄4" SilverGalv®1⁄4" 150 50
H 122 3/8 EG 3⁄8" SilverGalv®3⁄8" 590 50
H 122 1/2 EG 1⁄2" SilverGalv®1⁄2" 1,080 50
H 122 1/4 SS6 1⁄4" Type 316 Stainless Steel 1⁄4" 150 50
H 122 3/8 SS6 3⁄8" Type 316 Stainless Steel 3⁄8" 590 50
H 122 1/2 SS6 1⁄2" Type 316 Stainless Steel 1⁄2" 1,080 50
Hold in the open position.
•No need to thread the Trapnut™
fastener from either end of the rod —
saving valuable time
•Perfect for retro-fit applications where
the rod ends are not accessible
Press the pin with pliers.
•Locking pin holds it in the desired
position
•Can be removed and reused
Insert the bottom plate on the rod
and close the top plate.
•Precision threads trap the threaded
rod for a sturdy hold that can be
adjusted up or down for fine-tune
positioning
•Functions as a hex nut, square
washer, and flat washer combined
Tighten to the desired position with
pliers.
•Can be adjusted up or down for fine-
tune positioning
•Sturdy steel construction that is load
bearing
•Sized to provide custom fit for either
15⁄8" or 11⁄2" strut systems
1
Easy to Install
2
3
4
Features and Benefits
The unique scissor action of the Trapnut™Strut Fastener closes at any
desired position on the threaded rod. Once closed, precision threads trap the
threaded rod for a sturdy hold that can be adjusted up or down for fine-tune
positioning. While the versatile Trapnut™has a locking pin that holds it in the
desired position, it can also be removed and reused.
Trapnut™Strut Fastener NEW!
NEW!
Standard method using nuts
and washers.
New method using Trapnut
™
Strut Fastener.
Unlike a hex nut, there is no need to
thread the Trapnut™from either end of the
rod, saving valuable time on the job. While
the Trapnut™Strut Fastener is a time-
saver for new construction, it is invaluable
for retro-fit applications. Rather than
disassembling an existing trapeze to run
additional conduit above it, the Trapnut™
fastener can be clamped between the
existing trapeze and the beam clamp for a
speedy retro-fit solution. It’s ideal for
applications where the rod ends are not
accessible.
The Trapnut™fastener has a sturdy steel
construction that is load bearing, so you
can be confident of a solid installation.
And, the Trapnut™fastener functions as a
hex nut, square washer and flat washer
combined, so there are fewer parts to
keep up with on the job.
H 122 3⁄8
Trapnut
™
Strut
Fastener Galv-Krom
®
H 122 3⁄8 EG
Trapnut™ Strut
Fastener SilverGalv™
tnb07_gm102_F_08_09 1/18/08 4:25 PM Page F-8
Threaded Products & Hardware
Metal Framing, Pipe Hangers and Accessories
A-3
F-9
AB-241 AB-241L
CAT.
BOLT STD.
NO.
SIZE CTN.
AB-241L-1/4 1⁄4100
AB-241L-5/16 5⁄16 100
AB-241L-3/8 3⁄8100
AB-241L-1/2 3⁄8100
AB-241L-5/8 5⁄8100
CAT.
BOLT STD.
NO.
SIZE CTN.
AB-241-1/4 1⁄4100
AB-241-5/16 5⁄16 100
AB-241-3/8 3⁄8100
AB-241-1/2 1⁄2100
AB-241-5/8 5⁄8100
AB-241-3/4 3⁄450
NEW!
NEW! Located Square WasherSquare Washer
AB227
11⁄16"
3"
45˚
25⁄16"11⁄16"
15⁄8"
B
15⁄8"
A
CAT.
STD.
NO.
A B CTN.
AB239 1 713⁄16 81⁄215
AB-239-2 133⁄417 10
AB-239-3 193⁄4251⁄210
Standard Finish – GoldGalv
®
, unless otherwise stated.
AB-239
21⁄2"
45˚ 31⁄2"
AB225
Angular Fittings
AB206 X207
AB207
31⁄2"
53⁄8"71⁄4"
31⁄2"53⁄8"
31⁄2"
91⁄8"
31⁄2"
AB219
X208 AB220
AB240
7"
35⁄8"
Flat Plate Fittings
AB-242
For use with either 3⁄8"
or 1⁄2" hanger rod
AB255
AB253
31⁄2"
31⁄2"
53⁄8"
53⁄8"
Standard Finish – GoldGalv
®
, unless otherwise stated.
AB257 AB261
AB263 AB265
. . . . . . Standard Dimensions . . . . . .
•Hole Spacing: 13⁄16" from End
•Hole Spacing: 17⁄8" Centers
•Hole Size: 9⁄16" Diam.
•Material: 15⁄8" Width
•Material: 1⁄4" Thick
53⁄8"
53⁄8"
53⁄8"
53⁄8"
31⁄2"53⁄8"
53⁄8"
31⁄2"
tnb07_gm102_F_08_09 1/18/08 4:25 PM Page F-9
Threaded Products & Hardware
Metal Framing, Pipe Hangers and Accessories
F-10
Channel Nuts
Superstrut channel nuts are manufactured from mild steel
and are case hardened.
Design Data
Superstrut self aligning channel nuts are designed to provide resistance to
pull out and resistance to side slip in excess of the full strength of the
channels with which they are used. The extreme resistance to side slip
results from the unique design of the alternate teeth, spaced and designed
to develop a wedging action that increases with pressure or load.
UC-100 Universal Cone Nut
Eliminates the inventory and installation hassles of conventional spring nuts.
Fits all 15⁄8" channel, regardless of depth, with a simple twist of your thumb.
Pliable nylon cone secures the nut in place through the entire range of
construction site temperatures.
Screw Threads
THREAD SIZE 1⁄45⁄83⁄81⁄2
THREADS PER INCH 20 18 16 13
DESIGN TORQUE (FT.–LBS.) 61119 50
Standard Finish – GoldGalv
®
, unless otherwise stated.
All threaded products are American Standard thread, free fit class 2.
GoldGalv®hardware finish is standard for all Superstrut products.
This is a multi-process finish of electro-plated zinc, followed by gold
colored zinc dichromate to give excellent corrosion resistance and a
superior paint base. See pages F-3–F-4 for a complete description
of the GoldGalv®hardware finish.
Note: Standard Spring and Springless Nuts are supplied with a silver electro-galvanized (EG)
finish. These items are not visible in a gold system and are universal with other systems’
finishes and colorations.
Load Ratings for 1⁄4", 3⁄8" and 1⁄2" Strut Nuts
used in Superstrut
CHANNEL
SLIP TEST PULL TEST
NUT SIZES
RATING RATING
1⁄4"300 500
3⁄8"750 1,000
1⁄2"1,200 2,000
If connections will be subjected to dynamic or seismic loading conditions,
contact the factory for design assistance.
1. All ratings have safety factor of 3 applied.
2. Load ratings are for Static Applications.
tnb07_gm102_F_10_11 1/18/08 4:27 PM Page F-10
Threaded Products & Hardware
Metal Framing, Pipe Hangers and Accessories
A-3
F-11
Nuts & Bolts
Sizes: 1⁄4", 3⁄8", *1⁄2"
& **100B1⁄2"
For all 15⁄8" channel.
*Will not fit “B” series channel.
**For “B” Series channel.
GoldGalv®Finish.
Sizes: 1⁄4", 5⁄16", 3⁄8" & 1⁄2"
Nut is square over 1⁄2" size.
For all “B” series channel
and inserts.
Sizes: 1⁄4", 5⁄16", 3⁄8", 1⁄2",
5⁄8", 3⁄4" & 7⁄8"
Nut is square over 1⁄2" size.
For all “A” and “C” series
channel and inserts.
Sizes: 3⁄8", 1⁄2" & 5⁄8"
Nut is square over 1⁄2" size.
For all “E” and “H” series
channel and inserts.
Sizes: 1⁄4", 5⁄16", 3⁄8", 1⁄2",
5⁄8" & 3⁄4"
Nut is square over 1⁄2" size.
For use with all channels.
Silver Electroplated Finish.
Sizes: 1⁄4", 3⁄8", 1⁄2", 5⁄8"& 3⁄4"
Nut is square over 1⁄2" size.
For all “A”, “C”, “E” and “H” series
channel and inserts.
Sizes: 1⁄4", 3⁄8", 1⁄2", 5⁄8", 3⁄4",
7⁄8" & 1"
GoldGalv®Finish.
Sizes: 3⁄8" & 1⁄2"
GoldGalv®Finish.
Sizes: 1⁄4", 5⁄16", 3⁄8", 1⁄2" & 5⁄8"
GoldGalv®Finish.
Sizes: 1⁄4", 5⁄16", 3⁄8", 1⁄2",
5⁄8", 3⁄4" & 7⁄8"
GoldGalv®Finish.
Sizes: 1⁄4", 3⁄8", 1⁄2" & 5⁄8"
GoldGalv®Finish.
CM-100 Nylon
Cone Nut
H-100 Long
Spring Nut
B-100 Short
Spring Nut
AC-100
Springless Nut
A-100 Regular
Spring Nut
AB-100
Springless Nut
E-146 Standard Square Nut
UC-100 Universal
Nylon Cone Nut
ES-145 Swivel Nut
and Jam Nut
Combinations
E-147 Flat Steel Washer
E-142 Hex Head
Cap Screw
E-149 Slotted Hex
Indented Head
Machine Screw
E-145 Standard Hex Nut
E-148 Lock Washer
Sizes: 1⁄4" x 1", 1⁄4" x 11⁄2",
3⁄8" x 1", 3⁄8" x 11⁄2", 1⁄2" x 15⁄16"
& 1⁄2" x 11⁄2"
See price sheet for additional sizes.
Sizes: 1⁄4" x 3⁄4", 1⁄4" x 1",
5⁄16" x 11⁄4" & 3⁄8" x 11⁄4"
E-150-S
Lag Bolt Screw
Size: 3⁄8" & 1⁄2"
Drill Size: 1⁄4" & 111⁄32"
E-151-D Wood Screw Drive
Size A: 1⁄4"
Size B: 2"
Max. Rec. Load: 100 lbs.
ES-142 Seismic
Stiffner Nut
Size: ES-142-1⁄2x 11⁄2"
Bolt Dia.: 1⁄2"
A
B
Sizes: 1⁄4",3⁄8" & 1⁄2"
For all 15⁄8" & 11⁄2" channels.
May be used with ALL strut
depths. Can be used for CM-100,
A-100, B-100, & AB-100 Series.
GoldGalv®Finish.
tnb07_gm102_F_10_11 1/18/08 4:27 PM Page F-11
Threaded Products & Hardware
Metal Framing, Pipe Hangers and Accessories
F-12
Nuts & Bolts
(continued)
CAT.
DESIGN STD.
NO.
A B LOAD LBS. CTN.
E120 3/8 13⁄83⁄81,000 25
E120 1/2 11⁄21⁄21,800 25
E-120
CAT.
DESIGN STD.
NO.
A B LOAD LBS. CTN.
E122 3/8 13⁄83⁄81,000 25
E-122-1/2 11⁄21⁄21,800 10
E-122
CAT.
DESIGN STD.
NO.
A B LOAD LBS. CTN.
E130 3/8 13⁄83⁄81,000 25
E-130-1/2 11⁄21⁄21,800 25
E-130
CAT.
DESIGN STD.
NO.
A B LOAD LBS. CTN.
E131 3/8 13⁄83⁄81,000 25
E-131-1/2 11⁄21⁄21,800 10
Standard Finish – GoldGalv
®
, unless otherwise stated.
E-131
A
A
A
A
B
B
B
B
A
Standard Finish – GoldGalv
®
, unless otherwise stated.
Fender Washer
CAT.
HOLE STD.
NO.
SIZE DIA. STD. CTN.
EF147 1/4 1⁄411⁄45⁄16 100
EF-147-3/8
3⁄81
1⁄2
7⁄16 100
EF-147-1/2 1⁄429⁄16 100
EF-147
Regular Spring Stud Nut
CAT.
BOLT LENGTH STD.
NO.
DIA. A CTN.
A182 1/4 1 1⁄41 250
A-182-1/4 X 1-1/4 1⁄411⁄4250
A-184-3/8 X 1
3⁄8
150
A-184-3/8 X 1-1/4
3⁄8
11⁄450
A-185-1/2 X 1 1⁄2150
A-185-1/2 X 1-1/4 1⁄211⁄450
For all “A” and “C” series channels.
Springless Stud Nut
CAT.
BOLT LENGTH STD.
NO.
DIA. A CTN.
A177 1/4 1 1⁄4150
A-177-1/4 X 1-1/4 1⁄411⁄4250
A-179-3/8 X 1
3⁄8
1 250
A-179-3/8 X 1-1/4
3⁄8
11⁄450
A-180-1/2 X 1* 1⁄21 250
A-180-1/2 X 1-1/4* 1⁄211⁄4250
* Cannot be used with “B” Series channel.
A-177 to A-180
A-182 to A-185
A
Swivel Eye
Swivel Eye with Stud
Swivel Joint
Swivel Joint with Stud
A
tnb07_gm102_F_12_13 1/18/08 4:25 PM Page F-12
Threaded Products & Hardware
Metal Framing, Pipe Hangers and Accessories
A-3
F-13
Threaded Rod
E-151
Black available upon request.
Machine Threaded opposite end, carbon steel.
Order by Prod. #, rod size and rod length.
CAT.
THREADS DESIGN STD.
NO.
SIZE PER INCH LOAD LBS. CTN.
H-104-1/4 1⁄420 150 *
H-104-3/8 3⁄816 610 *
H-104-1/2 1⁄213 1,130 *
H-104-5/8 5⁄811 1,810 *
H-104-3/4 3⁄410 2,710 *
H-104-7/8 7⁄89 3,770 *
H-104-1 1 8 4,960 *
Black available upon request.
*Standard lengths 6 ft., 10 ft. and 12 ft.
Standard Finish – GoldGalv
®
, unless otherwise stated.
H-104 Series Rod
CAT.
ROD STANDARD STD.
NO.
SIZE ROD LENGTHS CTN.
E-151-3/8 3⁄84, 6, 8, 10, 12 100
E-151-1/2 1⁄24, 6, 8, 10, 100
CAT.
ROD STD.
NO.
SIZE A CTN.
H-119-1/4X3/8 1⁄4to 3⁄811⁄250
H-119-3/8X1/2 3⁄8to 1⁄211⁄450
H-119-1/2X5/8 1⁄2to 5⁄811⁄450
H-119-5/8X3/4 5⁄8to 3⁄411⁄250
H-119-3/4X7/8 3⁄4to 7⁄813⁄450
CAT.
ROD STD.
NO.
SIZE A CTN.
H-119-1/4 1⁄47⁄850
H-119-5/16 5⁄16 7⁄850
H-119-3/8 3⁄811⁄850
H-119-1/2 1⁄211⁄450
H-119-5/8 5⁄821⁄850
H-119-3/4 3⁄421⁄450
H-119-7/8 7⁄821⁄250
H-119-1 12
1⁄450
Standard Finish – GoldGalv
®
,
unless otherwise stated.
A
A
DATA FOR PRESSURE PIPING
CAT.
ROD ULTIMATE ‡ ROOT AREA NOMINAL MAX. SAFE STD.
NO.
SIZE LOAD IN LBS. THREAD PIPE SIZE LOAD AT 450° CTN.
R628-6 FT. 1⁄4–20 900 .027 — — 300
R638-6 FT. 3⁄8–16 1,900 .068 3⁄4" to 2" 610 150
R648-6 FT. 1⁄2–13 3,500 .126 21⁄2" to 31⁄2" 1,130 60
R1028-10 FT. 1⁄4–20 900 .027 — — 500
R1038-10 FT. 3⁄8–16 1,900 .068 3⁄4" to 2" 610 250
R1048-10 FT. 1⁄2–13 3,500 .126 21⁄2" to 31⁄2" 1,130 100
‡ Load Ratings based on safely factor of three.
U-571, U-572 Conduit Clamp
CONDUIT MAX. FLANGE DIM. STD.
CAT. NO.
SIZE THICKNESS A CTN.
U-571 1⁄211
3⁄425
U-571 3⁄43⁄413⁄425
U-571 11⁄213⁄425
U-572 3⁄411⁄221⁄225
U-572 11
1⁄421⁄225
U-572 11⁄412
1⁄225
U-572 11⁄25⁄821⁄225
Standard Finish – GoldGalv
®
brand.
For attaching
1
⁄
2
" thru 1
1
⁄
2
" conduit to beam, channel, angle or column.
Secures conduit to the support parallel or at right angles to it.
5
⁄
16
" set screw, 12 ga. material.
Beam Clamps for Mounting Pipe and Conduit
U-571, U-572
A
H-104 — Hanger Rod: Continuous ThreadE-151 — Coach Screw Rod
R-Series Continuous Thread Rod — Galvanized Standard Rod
Coupling
Reducing Rod
Coupling
tnb07_gm102_F_12_13 1/18/08 4:25 PM Page F-13
Fittings & Brackets
Metal Framing, Pipe Hangers and Accessories
F-14
Fittings & Brackets — Series 200
Material
Superstrut fittings and brackets are manufactured
from hot rolled carbon steel.
Dimensions
The following standard dimensions apply to all fittings
except as indicated on the individual drawings.
•Hole spacing: 13⁄16" from end of fittings
•Hole spacing: 17⁄8" centers
•Hole size: 9⁄16" diameter
•Material: 15⁄8" wide
•Material: 1⁄4" thickness
Application Instructions
Parts drawings illustrate a typical use for the fitting,
and in many cases other uses for the part are
appropriate.
Design Data
Ratings vary when used with 12 or 14 gauge channel
and are shown for each channel material.
GoldGalv®hardware finish is standard for all Superstrut
products. This is a multi-process finish of electro-plated
zinc, followed by gold-colored zinc dichromate to give
excellent corrosion resistance and a superior paint base.
See page F-3 for complete description of the GoldGalv®
hardware finish. GoldGalv®hardware will be furnished if
no other finish is specified.
Nuts and Bolts Required
Unless otherwise noted, nuts and bolts for use with
fittings and brackets should be ordered separately.
The standard bolt for the 9⁄16" hole is a 1⁄2" hex head cap
screw 15⁄16" long. The 15⁄16" length may be used with all
series channel.
Standard Finish – GoldGalv
®
, unless otherwise stated.
CAT. NO.
A (IN.) STD. CTN.
AB252 1 37⁄810
AB252 2 57⁄810
AB252 3 77⁄810
AB252 4 97⁄810
17⁄16"
31⁄2"
A
41⁄8"
31⁄2"
17⁄8"
31⁄2"
41⁄8"
AB214
AB252
AB216
Standard Finish – GoldGalv
®
, unless otherwise stated.
•Hole Spacing: 13⁄16" From End
•Hole Spacing: 17⁄8" Centers
•Hole Size : 9⁄16" Diameter
•Material: 15⁄8" Width
•Material: 1⁄4" Thick
. . . . . . . . . . . . Standard Dimensions . . . . . . . . . . . .
41⁄8"
17⁄16"
31⁄2"
31⁄2"
21⁄4"
AB204
AB213
AB205
15⁄8"
21⁄4"
2"
17⁄8"
41⁄8"
AB201 AB203
AB202
tnb07_gm102_F_14_15 1/18/08 4:25 PM Page F-14
Fittings & Brackets
Metal Framing, Pipe Hangers and Accessories
A-3
F-15
31⁄2"
17⁄16"
41⁄8"41⁄8"
17⁄16"
31⁄2"
31⁄2"
17⁄8"
2"
AB254 R AB260 R
AB254 L
AB284 R
AB274
31⁄2"
15⁄8"
17⁄8"
2"
31⁄2"
31⁄2"
41⁄8"
53⁄8"
21⁄4"
•Hole Spacing: 13⁄16" From End
•Hole Spacing: 17⁄8" Centers
•Hole Size : 9⁄16" Diameter
•Material: 15⁄8" Width
•Material: 1⁄4" Thick
. . . . . . . . . . . . . . . Standard Dimensions . . . . . . . . . . . . . . .
AB284 L
X201
AB299
53⁄8"
41⁄8"
31⁄2"
2"
2"
21⁄2"
21⁄2"
47⁄8"
17⁄8"
X204
X299
X289
11⁄2"
15⁄16"
15⁄8"
25⁄8"
41⁄8"
31⁄2"
13⁄8"
63⁄8"
17⁄8"
11⁄2"
4"
N205
31⁄2"
53⁄8"
37⁄8"
1"
11⁄16"
33⁄4"
33⁄4"
Standard Finish – GoldGalv
®
, unless otherwise stated.
N-219
AB260 L
tnb07_gm102_F_14_15 1/18/08 4:25 PM Page F-15
Fittings & Brackets
Metal Framing, Pipe Hangers and Accessories
F-16
“Z” Shape Fittings
A209
For attaching “A” series channel.
B209
For attaching “B” series channel.
C209
For attaching “C” series channel.
13⁄8"
21⁄8"
11⁄16"
21⁄8"
11⁄16"
11⁄16"
21⁄8"
15⁄8"13⁄16"
CZ209
For attaching “A” back to back.
EZ209
For attaching “E” series channel.
•Hole Spacing: 13⁄16" From End
•Hole Spacing: 17⁄8" Centers
•Hole Size: 1" Diameter
•Material: 15⁄8" Width
•Material: 1⁄4" Thick
Standard Finish – GoldGalv
®
, unless otherwise stated.
. . . . . . Standard Dimensions . . . . . .
17⁄8"
27⁄16"
17⁄8"
31⁄4"
•Hole Spacing: 13⁄16" From End
•Hole Spacing: 17⁄8" Centers
•Hole Size: 1" Diameter
•Material: 15⁄8" Width
•Material: 1⁄4" Thick
. . . . . . Standard Dimensions . . . . . .
Standard Finish – GoldGalv
®
, unless otherwise stated.
A217 A218 AW204
121⁄32"15⁄8"
33⁄4"
37⁄8"
121⁄32"
15⁄8"
37⁄8"
2"
17⁄8"
57⁄8"
AW205-R AW214
17⁄8"
37⁄8"
13⁄4"
13⁄4"17⁄8"
AW205 L
AW219 AW220
AW224
37⁄8"
15⁄8"121⁄32"
33⁄4"95⁄32"
15⁄8"121⁄32"
2"
17⁄8"
513⁄32"
15⁄8"121⁄32"
57⁄16"
37⁄8"
AW226 AW228
121⁄32"
15⁄8"
37⁄8"
33⁄4"
95⁄32"
121⁄32"
15⁄8"
2"
17⁄8"513⁄32"
Wing Shape Fittings
tnb07_gm102_F_16_17 1/18/08 9:38 AM Page F-16
Fittings & Brackets
Metal Framing, Pipe Hangers and Accessories
A-3
F-17
“U” Shape Fittings
5c"
1e"
A208
Does not include strut nut or
bolts. For “A” series channel.
A210
For attaching “A" series channel
A211
For attaching “A" series channel.
71⁄4"
15⁄8"
53⁄8"
121⁄32"
53⁄8"
31⁄4"
A212
B210
53⁄8"
121⁄32"
15⁄8"
15⁄8"
39⁄32"
7"
C210
For attaching “C" series channel.
E210
For attaching “E" series channel.
27⁄16"
121⁄32"
53⁄8"
121⁄32"
53⁄8"
AB245 AB-288
39⁄32"
17⁄8"
121⁄32"
11⁄16"
1"
121⁄32"
1⁄4"
10 ga.
11⁄2"
21⁄2"
3⁄4"-16
UNF
Thread
A-213
111⁄32"
3⁄32"
13⁄8"
41⁄2"7⁄8"
3⁄16"
13⁄8"Standard Dimensions
•Hole Spacing: 13⁄16" From End
•Hole Spacing: 17⁄8" Centers
•Hole Size: 9⁄16" Diameter
•Material: 15⁄8" Width
•Material: 1⁄4" Thick
Standard Finish – GoldGalv
®
, unless
otherwise stated.
AB227
11⁄16"
3"
45˚
25⁄16"11⁄16"
15⁄8"
B
15⁄8"
A
CAT.
STD.
NO.
A B CTN.
AB239 1 713⁄16 81⁄215
AB-239-2 133⁄417 10
AB-239-3 193⁄4251⁄210
Standard Finish – GoldGalv
®
, unless otherwise stated.
AB-239
21⁄2"
45˚ 31⁄2"
AB225
Angular Fittings
AN211
47⁄8"
53⁄8"
tnb07_gm102_F_16_17 1/18/08 9:38 AM Page F-17
Fittings & Brackets
Metal Framing, Pipe Hangers and Accessories
F-18
Post Bases
AP232 AP-232SQ
31⁄2"
111⁄16"
15⁄8"
111⁄16"
6"
41⁄4"41⁄4"
6"
31⁄2"
31⁄4"
6"
6"
6"
6"
41⁄4"
31⁄2"
3⁄4" Dia.
4 Holes
3⁄4" Dia.
35⁄16"
4 Holes
3⁄4" Dia.
41⁄4"
3⁄4" Dia.
31⁄2"
AP-232FL AP-235FL AP-231 AP-231SQ
AP-231FL AP-234 AP-234SQ AP-234FL
AP-206
AW-239
AP235 AP-235SQ
5"
31⁄2"
15⁄8"
7⁄16" Dia.
5⁄8"
Standard Finish – GoldGalv
®
, unless otherwise stated.
tnb07_gm102_F_18_19 1/18/08 9:38 AM Page F-18
Fittings & Brackets
Metal Framing, Pipe Hangers and Accessories
A-3
F-19
Q205
Q202
Q254
For 1
1
⁄
4
" standard pipe.
Load 1,500 lbs.
TR294
Frictionless needle bearings.
Design load: 1,000 lbs.
Safety factor of 5.
TR292
Frictionless needle bearings.
Design load: 500 lbs.
Safety factor of 5.
Q253
23⁄4"
6"
113⁄16"
35⁄8"
53⁄8"27⁄16"
11⁄4"
9⁄16" Dia.
31⁄2"
35⁄8"
27⁄16"53⁄8"
21⁄8"
21⁄8"
4"
4"
9⁄16" Dia.
23⁄4"
6"
113⁄16"
. . . . . . . . . . . . . . . Standard Dimensions . . . . . . . . . . . . . . .
•Hole Spacing: 13⁄16" From End
•Hole Spacing: 17⁄8" Centers
•Hole Size: 9⁄16" Diameter
•Material: 15⁄8" Width
•Material: 1⁄4" Thick
Q256
For 2" standard pipe.
Load 1,500 lbs.
Q255
For 2" standard pipe.
Load 1,500 lbs.
Special Application Fittings
Standard Finish – GoldGalv
®
, unless otherwise stated.
tnb07_gm102_F_18_19 1/18/08 9:38 AM Page F-19
Fittings & Brackets
Metal Framing, Pipe Hangers and Accessories
F-20
S-201-L and R
R as shown — L opposite hand.
12 ga. steel. Design Uniform Load/lbs.
A-1,200 250
A-1,400 200
1"
9⁄32" Dia.
7⁄16" Dia.
2"
AC
B
C
TS-272
Track Support
Requires
3
⁄
8
" x 2
1
⁄
2
" bolt
and nut (not included).
Design load: 1,000 lbs.
TS273
Track Support
For uses over channel splice. Requires
3
⁄
8
" x 2
1
⁄
2
" bolt and nut (not included).
Design load: 2,000 lbs.
21⁄8"
1"
31⁄2"
33⁄4"
33⁄4"
15⁄8"1"
21⁄8"
9⁄16",1 Hole
61⁄8"
81⁄2"
15⁄8"
13⁄16"
7⁄16", 2 Hole
9⁄16",1 Hole
7⁄16", 2 Hole
4"
S205
Design Uniform Load/lbs.
A-1200 650
A-1400 500
15⁄8"
33⁄4"
43⁄8"
4"
101⁄2"
S204
Design Uniform Load/lbs.
A-1200 650
A-1400 500
S218
Design Uniform Load/lbs.
A-1200 750
A-1400 650
S217
Design Uniform Load/lbs.
A-1200 750
A-1400 650
15⁄8"
6"
31⁄4"31⁄8"
141⁄2"
13⁄16"
6"
31⁄4"
31⁄8"33⁄4"
15⁄8"
53⁄4"
121⁄2"
. . . . . . . . . . . . . . . Standard Dimensions . . . . . . . . . . . . . . .
•Hole Spacing: 13⁄16" From End
•Hole Spacing: 17⁄8" Centers
•Hole Size: 9⁄16" Diameter
•Material: 15⁄8" Width
•Material: 1⁄4" Thick
CAT.
STD.
NO.
A B CTN.
AN-270-1 23⁄8610
AN-270-2 43⁄8810
AN-270-3 63⁄810 10
AN-270-4 83⁄812 15
AN-270-5 103⁄814 10
CAT.
STD.
NO.
A B C CTN.
S201-L6 or R6 61
15⁄16 325
S201-L8 or R8 82
7⁄16 525
S201L 10 or R 10 10 215⁄16 75
S201-L12 or R12 12 37⁄16 35
S201-L14 or R14 14 315⁄16 45
S201-L16 or R16 16 47⁄16 515
S201-L18 or R18 18 415⁄16 65
S201-L20 or R20 20 57⁄16 710
Standard Finish – GoldGalv
®
, unless otherwise stated.
AN-270
13⁄16"
13⁄16"
A
2"
B
Special Application Fittings (continued)
tnb07_gm102_F_20_21 1/18/08 9:37 AM Page F-20
Fittings & Brackets
Metal Framing, Pipe Hangers and Accessories
A-3
F-21
6"
161⁄2"
51⁄4"31⁄8"
13⁄16"
15⁄8"15⁄8"
181⁄2"
31⁄8"
51⁄4"
13⁄16"
6"
S236
Design Uniform Load/lbs.
A-1,200 800
A-1,400 650
15⁄8"
13⁄16"
201⁄2"
31⁄8"
7b"
1i"
6"
73⁄4"
S247
Design Moment
(channel upright as shown)
When supported by
A-1,200 5,250 inch lbs.
A-1,400 3,650 inch lbs.
Applies to fitting only, not to the arm.
For
A-1200 B-1202
A-1400 B-1402
S248
Design Moment
(channel upright as shown)
When supported by
A-1,200 10,800 inch lbs.
A-1,400 7,550 inch lbs.
Applies to fitting only, not to the arm.
For
A-1,200
A-1,400
S-250
May be installed inverted with no
change in load ratings. Strut section
made from half slot channel.
Sizes: 6", 12" 18" & 24"
CAT.
DESIGN STD.
NO.
A LOAD LBS. CTN.
S250 6 6 1,500 1
S-250-12 12 800 1
S-250-18 18 550 1
S-250-24 24 400 1
43⁄4
71⁄2"
45⁄8"
3"
A
43⁄4"
57⁄8"
S-256
When installed in inverted position reduce load rating 40%.
Strut section made from half slot channel.
Sizes: 6", 12" 18" & 24"
S-251
Strut section made from half slot channel.
Sizes: 12", 18", 24", 30" & 36"
CAT.
DESIGN STD.
NO.
A LOAD LBS. CTN.
S-251-12 12 1,650 1
S-251-18 18 1,050 1
S-251-24 24 800 1
S-251-30 30 650 1
S-251-36 36 500 1
CAT.
DESIGN STD.
NO.
A LOAD LBS. CTN.
S256 6 6 1,000 1
S-256-12 12 500 1
S-256-18 18 300 1
S-256-24 24 250 1
31⁄2"
A
45⁄8"
A
Standard Finish GoldGalv
®
, unless otherwise stated.
S226
Design Uniform Load/lbs.
A-1200 1,000
A-1400 750
S222
Design Uniform Load/lbs.
A-1,200 1,000
A-1,400 750
61⁄4"
Brackets
13⁄16"
tnb07_gm102_F_20_21 1/18/08 9:38 AM Page F-21
Concrete Inserts
Metal Framing, Pipe Hangers and Accessories
F-22
B-302
B804
C-302
4"
C-804
Standard lengths 10 ft. and 20 ft. Length tolerance 3⁄16". Assemblies
available in any length from 12" to 20 ft. Consult factory.
Insert with end caps and foam filler strip installed.
Material:
B-302 and C-302 Insert Channel-12 ga. steel. B-804
and C-804 End caps — 12 ga. steel.
Superstrut continuous insert channel is cold formed from
12 gauge hot rolled strip steel in two basic sizes as follows:
CAT. NO. B-302
15⁄8"x
13⁄16" dim. 7⁄8" slot
CAT. NO. C-302
15⁄8" x 13⁄8" dim. 7⁄8" slot
Finishes
Product is available in GoldGalv®pre-galvanized (PG), hot dipped galvanized
(HDG) and stainless steel (SS). Contact your T&B Sales team for delivery
and pricing.
Standard lengths are 10 ft. and 20 ft. Product is supplied with foam
filler and end caps to prevent seepage of concrete into channel.
Application
For casting into concrete walls, floors or ceilings to provide
attachment anywhere along the continuous slot.
Design Data
Load ratings as shown have a safety factor of 3 in 3,000 lb. hard rock
concrete. Where “good” concrete does not exist, the load ratings shall
not apply.
GoldGalv®hardware finish is standard for all Superstrut products. This is
a multi-process finish of electro-plated zinc, followed by gold colored zinc
dichromate to give excellent corrosion resistance and a superior paint base.
See page F-3 for a complete description of the GoldGalv®hardware finish.
GoldGalv®hardware will be furnished if no other finish is specified.
Standard Finish – GoldGalv
®
, unless otherwise stated.
Design Load lbs.
2,000 lbs. per foot in 3,000 lbs. hard rock concrete with a safety factor of 2.
CAT.
NO. DESCRIPTION
B-302* Insert channel 12 ga. steel — 13⁄16" depth
C-302* Insert channel 12 ga. steel — 13⁄8" depth
B804 End cap in B Series Concrete Insert
C-804 End cap in C Series Concrete Insert
*Add suffix -10 for 10' lengths and -20 for 20' lengths
NOTE: B-302 and C-302 are furnished with:
A. Concrete safe tape applied to interior of channel to cover holes.
B. Styrene insert between tape and 7⁄8" continuous opening.
C. Two end caps on either side of strut to prevent concrete seepage.
B-302 C-302
15⁄8"
115⁄16"11⁄8"
13⁄16"
15⁄8"
13⁄8"
21⁄2"
Concrete Inserts (Series 300/400)
4"
13⁄16"
11⁄8"
13⁄16"
tnb07_gm102_F_22_23 1/18/08 9:41 AM Page F-22
Metal Framing, Pipe Hangers and Accessories
A-3
F-23
Concrete Inserts
450
450 — End Cap
CAT.
FOR STD.
NO.
CHANNEL “X” MATERIAL CTN.
C-450TB C-1,200 3" 12 ga. 100
Do not come in pairs, order number of total pieces required.
Inserts may be assembled from short pieces of channel by use of end caps.
Order closure strip separately.
452-TB — Spot Insert —
Top is Deep Drawn Cup
•An insert with a knockout saves covering the opening.
Accommodates hanger rod sizes from 1⁄4" through 7⁄8" by
means of an AB-102 insert nut
•Design load: 1,350 lbs. in 3,000 lb. hard rock concrete
with a safety factor of 3
•Order AB-102 nut separately
452TB
AB-102
Knockout
13⁄8"
2"
317⁄32"
15⁄8"
119⁄32"12 ga. Steel
C475 — Metal Deck Ceiling Bolt
C475
Metal Deck Ceiling Bolts are used with our Figure 123. Rod Couplings
ordered separately. Made special to customer order.
Material: Steel
Finish: Standard Finish – GoldGalv®
Black (add suffix “-B”)
Electro-Galvanized (add suffix “-EG”)
Ordering: Specify size, dimension “A”, catalog number and finish.
CAT.
WT. MAX.
NO.
EACH A B C LOAD
C475 3/8 .75 3⁄81 610
C475 1/2 .97 1⁄211⁄41,130
C475 5/8 1.11 5⁄811⁄21,810
C475 3/4 1.42 3⁄413⁄42,710
C475 7/8 2.00 7⁄82 3,770
C475 1 612
1⁄44,960
S
p
e
c
i
f
y
AB-102 — Unhardened Square Nut
CAT.
STD.
NO.
SIZE (IN.) CTN.
AB102 1/4 1⁄450
AB-102-3/8 3⁄8100
AB-102-1/2 1⁄2100
AB-102-5/8 5⁄850
AB-1002-3/4 3⁄450
AB-102-7/8 7⁄850
For use with Spot Insert Cat. No. 452.
6"
B
A1⁄4"
C
tnb07_gm102_F_22_23 1/18/08 9:41 AM Page F-23
Beam Clamps
Metal Framing, Pipe Hangers and Accessories
F-24
Materials
Most products are manufactured from hot rolled carbon steel bars or hot rolled strip steel. Pipe
rollers are cast iron. Products which are copper placed carry the letter “T” in the prefix.
Design Loads
Where design loads are indicated, they provide for a safety factor of 3 in conformance with
the “AMERICAN STANDARD CODE FOR PRESSURE PIPING.”
GoldGalv®hardware finish is standard for all Superstrut products. This is a multi-process
finish of electro-plated zinc, followed by gold colored zinc dichromate to give excellent
corrosion resistance and a superior paint base. See pages F 3–F 4 for a complete
description of the GoldGalv®hardware finish. GoldGalv®hardware will be furnished if
no other finish is specified.
Superstrut®Beam Clamps
Beam Clamps for Mounting Channel
CAT. STD.
NO. FOR CHANNEL A CTN.
U501 A-1200 A-1400 33⁄16 20
B-1200 B-1400
C-1200 B-1402
U502 A-1202 A-1402 413⁄16 20
C-1202 H-1200
U504 U505
U501, U502
Furnished complete
Design load U501 – 2,150 lbs.
U502 - 3,000 lbs.
3"
23⁄8"
8"
A
8"
13⁄16"
7⁄8"
21⁄4"
1"
1"
U510
1
⁄
2
" x 1
1
⁄
2
" set screw included.
Order separately one
1
⁄
2
" x 1
1
⁄
2
" hex head cap
screw and
1
⁄
2
" channel nut.
512-U
Order separately one
1
⁄
2
" x 1
1
⁄
2
" hex
head cap screw and
1
⁄
2
" channel nut.
Channel
A-1,200
A-1,400
Design Load lbs.
1,000
800
Channel
A-1,200
A-1,400
Design Load lbs.
1,000
800
tnb07_gm102_F_24_25 1/18/08 4:24 PM Page F-24
Beam Clamps
Metal Framing, Pipe Hangers and Accessories
A-3
F-25
Standard Finish – GoldGalv
®
, unless otherwise stated.
U514
3
⁄
8
" x 1
1
⁄
2
" set screw included.
Design load 750 lbs./per pair.
11⁄4"
11⁄4"
U515
For all “A” series channel.
1
⁄
2
" x 1
1
⁄
2
" set screw included.
Design load 800 lbs.
U514A
3
⁄
8
" x 1
1
⁄
2
" set screw included.
Design load 1650 lbs./per pair.
7⁄8"
3⁄8"
11⁄4"15⁄8"
3⁄8"
1 Hole
9⁄16" Dia.
3"
U515B
For all "B" series channel.
1
⁄
2
" x 1
1
⁄
2
" set screw included.
Design load 800 lbs.
11⁄4"
21⁄8"
CAT.
FLANGE DESIGN STD.
NO.
WIDTH* A LOAD LBS. CTN.
U-520 23⁄8–41⁄283⁄42,000 10
U-521 33⁄4–53⁄410 1,300 10
U-522 55⁄8–75⁄8117⁄8900 10
*When ordering specify flange width.
U520, U-521 & U-522
Standard Finish – GoldGalv
®
brand
Nuts, cap screws and set screws included.
25⁄32
15⁄8"
Beam Clamps for Mounting Channel
(continued)
A-597
Standard Finish — GoldGalv
®
brand
Channel Series A
Design load lbs./ea. – 800
Wide
Flange
Beam 13⁄4"
31⁄2"
31⁄2"
A-1200
Channel
U543
tnb07_gm102_F_24_25 1/18/08 4:24 PM Page F-25
Beam Clamps
Metal Framing, Pipe Hangers and Accessories
F-26
CAT.
STD.
NO.
A B C D CTN.
540 3/8 7⁄16 17⁄81⁄47⁄825
540 1/2 EC 9⁄16 17⁄81⁄415⁄825
540-5/8 11⁄16 21⁄23⁄8225
540-3/4 13⁄16 21⁄23⁄8225
Beam Clamps for Hanging Rod
540
Side Beam Hanger Clip
Finishes – GoldGalv
®
brand or Black (B)
7⁄16" Dia.
1⁄4" Dia.
9⁄16" Dia. 21⁄16"
21⁄16"
2"
3⁄16"
Standard Finish – GoldGalv
®
, unless otherwise stated.
500SS316, 502SS316
and 503SS316 in 316
Stainless steel, also available.
542
Side Beam Hanger Clip
Finishes – GoldGalv
®
brand or Black (B)
Standard Finish – GoldGalv
®
, unless otherwise stated.
AB
2" A
C
D
B
Beam Clamps — Malleable Iron,
Silver Electroplated Finish
Rod Size
3⁄8"
1⁄2"
Design Load lbs.
610
1,000
BASE SIZE JAW TAPPING SET SCREW
CAT.
(IN.) OPENING OF BASE AND LOAD TORQUE IN STD.
NO.
A B (IN.) BACK HOLES RATING‡ INCH-LBS. CTN.
500-SC 11
1⁄415⁄16 1⁄4–20 250 60 50
501 11⁄215⁄87⁄85⁄16 –18 500 60 50
502 22 1 3⁄8–16 750 120 50
503-SC 25⁄821⁄211⁄2–13 1,250 250 20
507 21⁄223⁄813⁄81⁄2–13 1,250 250 20
508 21⁄223⁄821⁄81⁄2–13 1,250 250 10
509 11
1⁄415⁄16 10–24 150 60 100
510 27⁄32 11⁄85⁄81⁄4–20 250 40 100
511-SC 27⁄32 11⁄85⁄810–24 150 40 100
‡Safety Factor of 3.
Loan Ratings based on bottom hole of Beam Clamp.
CSA File No. LR-52208.
U562
Beam Clamp
1
⁄
2
" set screw included.
Rod Size:
1
⁄
2
"
Design load lbs. – 500
U562
Beam Clamp Optional Use
1
⁄
2
" set screw included.
Rod sizes:
1
⁄
2
"
Design load lbs. – 800
For 20° swivel application use
ES-145-
1
⁄
2
nut.
7⁄8"27⁄8"
25⁄8"
Square nut, order separately.
11⁄4"
US562
Beam Clamp with Swing Hanger
1
⁄
2
" screw included.
Rod sizes:
1
⁄
2
".
Design load lbs. – 800
U563
Beam Clamp
3
⁄
8
" set screw included.
Rod sizes:
3
⁄
8
"
Design load lbs. – 250
US563
Beam Clamp with Swing Hanger.
3
⁄
8
"
set screw included. Rod sizes:
3
⁄
8
".
Design load lbs. – 540
U563
Beam Clamp optional Use
3
⁄
8
" set screw
included. Rod sizes:
3
⁄
8
"
Design load lbs. – 400
21⁄4"
3⁄4"
17⁄8"
1"
Square nut, order separately
U-568
Beam Clamp Safety Strap
Standard Finish – GoldGalv
®
brand
For U-563 beam clamp.
U-568
Beam Clamp Safety Strap
Standard Finish – GoldGalv
®
brand
For U-562 beam clamp.
AA
tnb07_gm102_F_26_27 1/18/08 9:42 AM Page F-26
Beam Clamps
Metal Framing, Pipe Hangers and Accessories
A-3
F-27
Set Screw Included
Tapped Hole Size
A
B
7⁄8"
Set Screw C Included
Tapped Hole Size
B
A
121⁄32"
U-564 — Heavy-Duty Beam Clamp
CAT.
DIMENSIONS (IN.) DESIGN STD.
NO.
A B C LOAD LBS. CTN.
U-564-3/8 3⁄81⁄43⁄8x 21⁄41,300 25
U-564-1/2 1⁄21⁄41⁄2x 23⁄43,150 15
U564 5/8 5⁄81⁄41⁄2x 23⁄4 3,150 25
U-560 — Heavy-Duty Beam Clamp
CAT.
DIMENSIONS (IN.) DESIGN STD.
NO.
A B C LOAD LBS. CTN.
U560 1/4 1⁄41⁄83⁄8x 11⁄21,050 25
U-560-3/8 3⁄81⁄83⁄8x 11⁄21,050 25
U-560-1/2 1⁄21⁄41⁄2x 11⁄22,650 25
U-560-5/8 5⁄81⁄41⁄2x 11⁄22,650 25
Channel Angle Connector. Standard Finish — GoldGalv
®
.
Integral pilot, prevents twist.
Beam Clamps for Hanging Rod
(continued)
S-541
Swing Connector
Standard Finish – GoldGalv
®
brand
Rod Sizes:
3
⁄
8
"
For use with wood beam.
3
⁄
8
" x 1
3
⁄
4
" bolt, nut and clevis included.
Coach
Screw
U577
Clevis & Swing Connector
Rod Size
1
⁄
2
"
Standard Finish – GoldGalv
®
brand
For use with wood beam.
tnb07_gm102_F_26_27 1/18/08 9:42 AM Page F-27
Beam Clamps
Metal Framing, Pipe Hangers and Accessories
F-28
CAT.
ROD MAX, BEAM FOR USE WT.
NO.
SIZE WIDTH "A" WITH LBS./C
E-233-3⁄8-6 3⁄8" 6" E-231-3⁄8 or 20
E-233-3⁄8-10 3⁄8" 10" E-232-3⁄8 33
E-233-1⁄2-6 1⁄2" 6" E-231-1⁄2 or 26
E-233-1⁄2-10 1⁄2" 10" E-232-1⁄2 37
Anchor Clips should be used when clamps are subject to excessive vibration. To obtain
the correct size clips add 1 inch to the flange width. If length required is not standard,
order next largest standard length.
Galv-Krom
®
finish.
For use with E-231 and E-232 clamps when
hanger rod is not in straight through position.
Beam Clamps for Hanging Rod
A
•Clamps to I-beams, channels, angles and column
•Two sizes are available, one for 3⁄8inch and the other for 1⁄2
inch hanger rod. Each takes flanges up to .8 inch thickness
E-233 — Anchor Clip
E-231 — Structural Steel Clamp
CAT.
DIMENSIONS (IN.) WT.
NO.
A B C LBS./C
3
⁄
8
" or
1
⁄
2
" Rod
*E-231-3⁄8 21⁄212 7⁄831
**E-231-1⁄2 31
9⁄32 15⁄16 53
Assembly requires two H-116-C (
3
⁄
8
") or two H-116-D (
1
⁄
2
") square nuts to attach hanger rod.
1
⁄
2
" steel.
* Load rating of 500 lbs. with a safety factor of three.
** Load rating of 800 lbs. with a safety factor of three. Patented
Galv-Krom
®
finish.
Standard Finish – GoldGalv
®
, unless otherwise stated.
E-232 — Clamp with Swing Connector
CAT.
DIAMETER DIMENSIONS (IN.) WT.
NO.
FOR ROD A B C LBS./C
3
⁄
8
" or
1
⁄
2
" Rod
*E-232-3⁄8 3⁄8"9⁄16 7⁄16 148
**E-232-1⁄2 1⁄2"7⁄829⁄64 15⁄876
* Load rating of 400 lbs. with a safety factor of three.
** Load rating of 550 lbs. with a safety factor of three.
Galv-Krom
®
finish.
•E-231 clamp with swing connector
•Affords a convenient method of attaching to angled beams
A
B
C
A
B
C
tnb07_gm102_F_28_29 1/18/08 9:42 AM Page F-28
Beam Clamps
Metal Framing, Pipe Hangers and Accessories
A-3
F-29
CAT.
BEAM FLANGE STD.
NO.
WIDTH A CTN.
U568 1 6850
U-568-2 91150
U-568-3 6925
U-568-4 91250
U-568-5 12 15 50
U-568-6 6925
U-568-7 91225
U-568-8 12 15 25
16 ga. material.
Standard Finish – GoldGalv
®
, unless otherwise stated.
Beam Clamps for Hanging Rod
(continued)
U-568 Beam Clamps
CAT. NO.
BEAM FLANGE WT.
1⁄2"
HANGER RODS WIDTH (IN.) LBS./C
1
⁄
2
" Rod
E-160-1⁄2-6 21⁄2to 6 115
E-160-1⁄2-9 51⁄2to 9 125
E-160-1⁄2-12 81⁄2to 12 154
Load rating 800 lbs. with a safety factor of three.
Assembly requires hanger rod of the proper length and size plus
two H-114-D nuts
3
⁄
16
" steel,
1
⁄
2
" hook rod.
Galv-Krom
®
finish.
U-568
Beam Clamp Safety Strap
Standard Finish - GoldGalv
®
brand
For U-560 and U-564 beam clamp.
A
U569 —
Beam Clamp
•Standard finish - GoldGalv®
•Maximum flange width 5"
•Design load 400 lbs.
U570 — Beam Clamp with Safety Rod
3⁄8"
3⁄8"
A
•Clamps to I-beam where edge of beam flange
does not exceed .8 inch thickness
•Hook rod is furnished in three lengths to fit beam
flanges up to 6, 9 or 12 inch widths
8, 11 or 14
1⁄2
21⁄8
3⁄16 x 11⁄2
3 Min. 3 5⁄8Max.
CAT.
ROD DESIGN STD.
NO.
SIZE A B C D LOAD LBS. CTN.
C775L 3/8 3⁄83⁄83⁄423⁄823⁄8400 100
C-775L-1/2 1⁄23⁄83⁄423⁄823⁄8500 100
C-775L-5/8 5⁄81⁄23⁄425⁄16 23⁄8550 50
C-775L-3/4 3⁄45⁄83⁄425⁄16 23⁄8630 50
C-775L-7/8 7⁄83⁄413
5⁄16 3 1,200 25
Standard Finishes - GoldGalv
®
brand, Black (B), Stainless Steel (SS).
Carbon Steel.
C-775L
A
B
C
D
C-775L — Clamp with Lock Nut
E-160 — Adjustable Beam Clamp
•Standard finish -
GoldGalv®
•Flange width 4" min. – 8"
max.
•Sizes: 1⁄2" For use with 3⁄8"
rod, see U569.
•Design load 650°F – 500
lbs.
tnb07_gm102_F_28_29 1/18/08 9:42 AM Page F-29
Beam Clamps
Metal Framing, Pipe Hangers and Accessories
F-30
Beam Clamps for Hanging Rod
M-777 — Steel Top Beam ClampC-777 — Steel Top Beam Clamp & C-778 —
Steel Wide JawTop Beam Clamp
M-775L — Clamp with Lock Nut
M-778 — Steel Wide JawTop Clamp
ROD
CAT.
SIZE DESIGN STD.
NO.
A B C LOAD LBS. CTN.
M-775L-3/8 3⁄83⁄413⁄4400 100
M-775L-1/2 1⁄23⁄413⁄4400 100
M-775L-5/8 5⁄83⁄42 440 50
M-775L-3/4 3⁄43⁄42 500 50
Available in Electro-Galvanized (EG) or Black (B) Malleable Iron.
M-775L
BC
A
ROD SIZE A DESIGN LOAD LBS.
3⁄8350
1⁄2470
5⁄8550
3⁄4700
7⁄81,000
ROD SIZE A DESIGN LOAD LBS.
3⁄8400
1⁄2500
5⁄8850
3⁄4900
3⁄4"
A
11⁄4"
A
C-777, C-788
A
B
C
D
E
ROD DESIGN
CAT.
SIZE PIPE LOAD STD.
NO.
A SIZE B C D E F LBS. CTN.
C777 3/8 3⁄81⁄2–4 13⁄16 3⁄417⁄16 1 900 100
C-777-1/2 1⁄25–8 11⁄23⁄419⁄16 11⁄42,430 50
C-778-3/8 3⁄81⁄2–4 13⁄16 11⁄417⁄16 1 900 100
C-778-1/2 1⁄25–8 11⁄211⁄419⁄16 11⁄42,430 50
Standard Finish – Black (B) or GoldGalv
®
brand.
•Top Beam C-Clamp
•Rod Size: 3⁄8,1⁄2,5⁄8,&
3⁄4
•Available in Electro-Galvanized (EG) or Black (B) Malleable
Iron
•Provides clamping under roof installations with bar joist type
construction
•Order by Cat. No. and rod size
M-778
M-777
•Junior Top Beam C-Clamp
•Available in Electro-Galvanized (EG) or Black (B) Malleable
Iron
•Provides clamping under roof installations with bar joist
construction. Max. joist thickness 5⁄8"
•Order by Cat. No., rod size
tnb07_gm102_F_30_31 1/18/08 9:43 AM Page F-30
Beam Clamps
Metal Framing, Pipe Hangers and Accessories
A-3
F-31
•EC Clamp —
Malleable Iron
•For mounting pipe or
conduit vertically
across the beam
•Use SS316 suffix for
316 Stainless Steel
•Use HDG suffix for
hot dip galvanized
DIMENSIONS (IN.)
CAT. O.D. OF NOM.
NO. CONDUIT CONDUIT OR STD.
& SIZE OR PIPE PIPE SIZE CTN.
RCS-1/2
.840 1⁄250
RCS-3/4
1.050 3⁄450
RCS-1
1.315 1 50
RCS-1-1/4
1.660 11⁄450
RCS-1-1/2
1.900 11⁄250
RCS-2
2.375 2 50
RC-3/8
.675 3⁄850
RC-1/2
.840 1⁄250
RC-3/4
1.050 3⁄450
RC-1
1.315 1 50
RC-1-1/4
1.660 11⁄450
RC-1-1/2
1.900 11⁄250
RC-2-SC
2.375 2 50
RC-2-1/2
2.875 21⁄225
RC-3
3.500 3 25
RC-3-1/2
4.000 31⁄225
RC-4-SC
4.500 4 20
DIMENSIONS (IN.)
CAT. O.D. OF NOM.
NO. CONDUIT CONDUIT OR STD.
& SIZE OR PIPE PIPE SIZE CTN.
EC 1/2
.840 1⁄250
EC-3/4
1.050 3⁄450
EC-1
1.315 1 25
EC-1-1/4
1.660 11⁄425
EC-1-1/2
1.900 11⁄225
EC-2
2.375 2 25
EC-2-1/2
2.875 21⁄210
EC-3
3.500 3 10
PC-3/8
.675 3⁄850
PC 1/2
.840 1⁄250
PC-3/4
1.050 3⁄450
PC-1
1.315 1 50
PC-1-1/4
1.660 11⁄425
PC-1-1/2
1.900 11⁄225
PC-2
2.375 2 25
PC-2-1/2
2.875 21⁄225
PC-3
3.500 3 10
PC-3-1/2
4.00 31⁄210
PC-4
4.500 4 10
Pipe Supports
Three types of pipe clamps are available to provide right angle, vertical and parallel attachment to a
beam. Types RC, EC and PC are malleable iron clamps with an edge that grips the structural member for
maximum holding power when tightened.
Type RCS clamps are all steel, providing two bearing surfaces for strong attachment for mounting pipe
or conduit at right angles to the beam.
All parts are electrogalvanized, including the threads. The clamps are designed for clamping to a wide
variety of beam thicknesses and tapers. Can be installed using only a wrench.
•RC Clamp —
Malleable Iron
•RCS Clamp — Steel
•For mounting pipe or
conduit at right angles
to the beam
•Use SS316 suffix for
316 Stainless Steel
•Use HDG suffix for
hot dip galvanized
•PC Clamp —
Malleable Iron
•For mounting pipe
or conduit parallel
to the beam
•Use SS316 suffix for
316 Stainless Steel
•Use HDG suffix for
hot dip galvanized
CONDUIT MAX. BEAM FLANGE THICKNESS
SIZE C-247 C-248 C-249
1⁄25⁄81
3⁄47⁄16 3⁄411⁄2
1
1⁄211⁄4
1
1⁄41
1
1⁄25⁄8
Dim. A
21⁄429⁄16 31⁄4
Dim. B
13⁄813⁄421⁄2
Dim. C
23⁄434
Dim. D
9⁄16 9⁄16 5⁄8
Per Carton
100 50 50
Wt. in lbs./C
33 36 59
Galv-Krom finish.
Standard Finish – GoldGalv
®
, unless otherwise stated.
A
B
C
D
1⁄8
•A versatile clamp for attaching conduit
to any type of beam, channel, angle, or
column
•Designed to hold the conduit snug
against the support with conduit either
parallel or at right angle to it
•The case hardened set screw bites into
the structural member for maximum
security
•1⁄8" steel
C-247, C-248, & C-249 —
Steel Conduit Clamps
Beam Clamps for Mounting Pipe and Conduit
tnb07_gm102_F_30_31 1/18/08 9:43 AM Page F-31
Beam Clamps
Metal Framing, Pipe Hangers and Accessories
F-32
Conduit and Pipe Hangers
6H Series
Without bolt Fig. 1
6H-B Series
With bolt and hex nut Fig. 2
6H- TB Threaded Series
Threaded with bolt Fig. 4
6H- T Threaded Series
threaded without bolt Fig. 3
WITHOUT BOLT WITH BOLT
CAT. FIG. CAT. FIG. RIGID CONDUIT STD.
NO. NO. NO. NO. EMT OR PIPE CTN.
6H0 16H0 B 21⁄2"3⁄8"–1⁄2" 100
6H0 T 36H0 TB 41⁄2"3⁄8"–1⁄2" 100
6H1 16H1-B 23⁄4"3⁄4" 100
6H1-T 36H1-TB 43⁄4"3⁄4" 100
6H2 16H2-B 2 1" 1" 100
6H2-TB 4 1" 1" 100
6H2 1/2 16H2 1/2-B 21
1⁄4" — 100
6H2 1/2-TB 41
1⁄4" — 100
6H3-SC 16H3-B 21
1⁄2"1
1⁄4" 100
6H3-TB 41
1⁄2"1
1⁄4" 100
6H4 16H4-B 2— 1
1⁄2" 100
6H4-TB 4— 1
1⁄2" 100
6H5 16H5-B 2 2" 2" 100
6H5-TB 4 2" 2" 100
6H6 16H6-B 22
1⁄2"2
1⁄2" 100
6H7 16H7-B 2 3" 3" 100
6H8 16H8-B 23
1⁄2"3
1⁄2" 100
6H9 16H9-B 2 4" 4" 100
Standard Finish – Electro-Galvanized (EG).
Use SS suffix for Stainless Steel.
Loading rating 500 lbs. with a safety factor of 3.
6H Series Conduit
and Pipe Hanger
•Accommodates 1⁄2"
through 4" EMT or
rigid conduit
•Can be used for either
vertical or horizontal
installation
•6HTB Series have a
built-in nut so there are
less parts to handle
or drop
•Installs easily with
a screwdriver
tnb07_gm102_F_32_33 1/18/08 4:24 PM Page F-32
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
A-3
F-33
GoldGalv®Outperforms Copper Plated
In a test conforming to ASTM G-87-84, also known as the Kesternich Test, Superstrut’s GoldGalv®
electrogalvanized zinc dichromate finish achieved superior corrosion resistance in comparison to copper plated.
Performed and certified by an independent testing laboratory, the stringent Kesternich test is equivalent to an
acid rain environment. The test procedure exposes subject material to condensed moisture containing harsh
sulfur dioxide (S02) which accelerates the aging process. During the series of test time cycles, the material
is thoroughly inspected for signs and progression of damaging red rust.
The first test series conducted included various light-duty adjustable clevis hangers assembled to copper
tubing. The GoldGalv®finish exhibited five times the red rust resistance as compared to copper plated.
The second test series was performed on various O.D. pipe straps attached to copper tubing and
continuous slot channel. GoldGalv®achieved greater red dust resistance by seven times over copper plating.
Once tests were completed, all copper tubes were split open and inspected for signs of electrolysis. The
copper tubes showed minimal deterioration as a result of the test and no indication of electrolysis occurrence
when attached to material with GoldGalv®finish.
ASTM G-87-84 Corrosion Test Results
INITIAL 50% 100%
FINISH RED RUST RED RUST RED RUST
Test Series I: Light-Duty Adjustable Clevis Hanger
GoldGalv 120 hours 216 hours *Never obtained
Copper Plated 24 hours 48 hours 72 hours
Test Series II: O.D. Pipe Straps
GoldGalv®168 hours 192 hours 240 hours
Copper plated 24 hours 48 hours 168 hours
*Test series ended after 360 hours.
Standard Finish – GoldGalv
®
, unless otherwise stated.
Standard Finish – GoldGalv
®
, unless otherwise stated.
GoldGalv®hardware finish is standard for all Superstrut products. This is a multi-process finish of
electro-plated zinc, followed by gold colorized zinc dichromate to give excellent corrosion resistance
and a superior paint base. See page F 3 for a complete description of the GoldGalv®hardware
finish. GoldGalv®hardware will be furnished if no other finish is specified.
Materials
Most products are manufactured from hot rolled carbon steel bars or hot rolled strip steel. Pipe
rollers are cast iron. Products which are copper plated carry the letter “T” in the prefix.
Design Loads
Where design loads are indicated, they provide for a safety factor of 3 in conformance with the “AMERICAN
STANDARD CODE FOR PRESSURE PIPING.”
Hanger Design
Pipe hangers are of advanced design and afford a new and better way of ordinary use.
Standard Dimensions
The following, except where noted, apply to all beam clamp fittings.
Hole Size: 9⁄16" diameter
Material: 15⁄8"wide
Material: 1⁄4" thick
Excellent Corrosion Resistance and a Superior Paint Base
tnb07_gm102_F_32_33 1/18/08 4:24 PM Page F-33
Pre-assembled for Easy Handling and Sorting
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
F-34
Superstrut Pipe Straps
Design Loads
700 – Superstrut Straps for EMT
CAT.
EMT O.D. STEEL STRAP DESIGN LOAD STD.
NO.
SIZE (IN.) SIZE (IN.) THICKNESS (LBS.) CTN.
Standard Finishes – GoldGalv
®
brand. Consult Factory
regarding other Finishes and Materials
700 3⁄8-STR 3⁄80.577 14 ga. 750 100
700-1⁄2-STR 1⁄20.706 14 ga. 750 100
700-3⁄4-STR 3⁄40.922 14 ga. 750 100
700-1-STR 1 1.163 14 ga. 750 100
700-1-1⁄4-STR 11⁄41.510 14 ga. 750 50
700-1-1⁄2-STR 11⁄21.740 12 ga. 800 50
700-2-STR 2 2.197 12 ga. 800 50
701 – Superstrut Straps for O.D. Tubing
CAT.
TUBING STEEL STRAP DESIGN LOAD STD.
NO.
O.D. (IN.) THICKNESS (LBS.) CTN
701-1⁄4 1⁄414 ga. 750 100
701-3⁄8 3⁄814 ga. 750 100
701-1/2-STR 1⁄214 ga. 750 100
701-5/8 5⁄814 ga. 750 100
701-3/4 3⁄414 ga. 750 100
701-7/8 7⁄814 ga. 750 100
701-1-STR 1 14 ga. 750 50
701-1-1/8 11⁄814 ga. 1,000 100
701-1-1/4 11⁄414 ga. 1,000 25
701-1-3/8 13⁄814 ga. 1,000 100
701-1-1/2 11⁄214 ga. 1,000 25
701-1-5/8 15⁄814 ga. 1,000 100
701-1-3/4 13⁄412 ga. 1,000 25
701-1-7/8 17⁄812 ga. 1,000 50
701-2 2 12 ga. 1,000 50
701-2-1/8 21⁄812 ga. 1,300 50
701-2-1/4 21⁄412 ga. 1,300 25
701-2-3/8 23⁄812 ga. 1,300 25
701-2-1/2 21⁄212 ga. 1,300 25
701-2-5⁄8 25⁄812 ga. 1,300 50
Superstrut Pipe Straps are designed to be twist inserted anywhere
along the slot side of the channel. Pipes can be placed as closely
as pipe couplings permit.
Some unique features of the straps include:
•Bolt head is combination slot and hex head
for flexibility of attachment
•Square nut is captivated on the shoulder for
easy one-handed tightening
•Straps are interchangeable with 11⁄2" strut for
broader application
•Straps are shipped assembled so counting
and sorting are easier
•Pipe or conduit sizes are sown on the strap
for easy identification
•All Superstrut Straps are preassembled for
easy handling and sorting
tnb07_gm102_F_34_35 1/18/08 4:23 PM Page F-34
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
A-3
F-35
RIGID
CAT.
CONDUIT OR O.D. STEEL STRAP DESIGN LOAD STD.
NO.
PIPE SIZE SIZE (IN.) THICKNESS (LBS.) CTN.
Standard Finishes – GoldGalv
®
brand, Electro-Galvanized EG (Silver)
702-3⁄8 3⁄8" 0.675 14 ga. 750 100
702-1⁄2 1⁄2" 0.840 14 ga. 750 100
702-3⁄4 3⁄4" 1.050 14 ga. 750 100
702-1 1" 1.315 14 ga. 750 100
702-1-1⁄4 11⁄4" 1.660 14 ga. 800 50
702-1-1⁄2 11⁄2" 1.900 12 ga. 800 50
702-2-STR 2" 2.375 12 ga. 800 50
702-2-1⁄2 21⁄2" 2.875 12 ga. 1,000 50
702-3 3" 3.500 12 ga. 1,650 50
702-3-1⁄2 31⁄2" 4.000 11 ga. 1,650 25
702-4 4" 4.500 11 ga. 1,650 25
702-4-1⁄2 41⁄2" 5.000 11 ga. 1,650 25
702-5 5" 5.563 11 ga. 1,650 25
702-6 6" 6.625 11 ga. 1,650 10
702-8 8" 8.625 11 ga. 1,650 10
702-10 10" 10.750 10 ga. 1,650 25
702-12 12" 12.750 10 ga. 1,650 25
Standard Finish – GoldGalv
®
, unless otherwise stated.
•For Rigid or IMC Conduit, Pipe and Electric Metal Tubing (EMT)
PIPE STEEL STRAP DESIGN LOAD STD.
CAT. NO.
O.D. THICNESS (LBS.) CTN.
Standard Finishes – GoldGalv
®
brand, Electro-Galvanized (Silver) —
use EG suffix, (i.e.) 703-1-1/2EG
703-1/2 .706 – .840 16 ga. 400 100
703-3/4 .932 – 1.050 14 ga. 550 100
703 1 1.163 – 1.315 14 ga. 550 100
703-1-1/4 1.508 – 1.660 14 ga. 800 50
703-1-1/2 1.738 – 1.900 14 ga. 800 50
703-2 2.195 – 2.375 14 ga. 800 50
Standard Finishes – GoldGalv
®
brand, Electro-Galvanized (i.e.) 701-1-1/2EG (Silver) Copper
Plated CT701-1-1/2.
Consult factory regarding other finishes and materials.
Superstrut Pipe Straps
(continued)
CAT.
TUBING STEEL STRAP DESIGN LOAD STD.
NO.
O.D. (IN.) THICKNESS (LBS.) CTN
701-2-3/4 23⁄412 ga. 1,300 25
701-2-7/8 27⁄812 ga. 1,300 25
701-3 3 12 ga. 1,300 25
701-3-1⁄8 31⁄812 ga. 1,300 25
701-3-1⁄4 31⁄412 ga. 1,300 25
701-3-3/8 33⁄812 ga. 1,300 25
701-3-1/2 31⁄212 ga. 1,300 25
701-3-5/8 35⁄811 ga. 1,650 25
701-3-3/4 33⁄411 ga. 1,650 25
701-3-7/8 37⁄811 ga. 1,650 25
701-4 4 11 ga. 1,650 25
701-4-1/8 41⁄811 ga. 1,650 25
701-4-1/4 41⁄411 ga. 1,650 25
701-4-3/8 43⁄811 ga. 1,650 25
701-4-1/2 41⁄211 ga. 1,650 10
701-4-5/8 45⁄811 ga. 1,650 10
701-4-3/4 43⁄411 ga. 1,650 10
701-4-7/8 47⁄811 ga. 1,650 10
701-4 5 11 ga. 1,650 25
701-5-1/8 51⁄811 ga. 1,650 10
701-5-1/4 51⁄411 ga. 1,650 10
701-5-3/8 53⁄811 ga. 1,650 10
701-5-1/2 51⁄211 ga. 1,650 10
701-5-5/8 55⁄810 ga. 1,650 10
701-5-3/4 53⁄410 ga. 1,650 10
701-5-7/8 57⁄810 ga. 1,650 10
701-6 6 10 ga. 1,650 10
701-6-1/8 61⁄810 ga. 1,650 10
701-6-1/4 61⁄410 ga. 1,650 10
701-6-3/8 63⁄810 ga. 1,650 10
701-6-1/2 61⁄210 ga. 1,650 10
701-6-5/8 65⁄810 ga. 1,650 10
701-6-3/4 63⁄410 ga. 1,650 10
701-6-7/8 67⁄810 ga. 1,650 10
701-8 8 10 ga. 1,650 10
702 – Superstrut Straps for Rigid Conduit,
IMC and Pipe
701 – Superstrut Straps for
O.D. Tubing (continued)
703 – Universal Clamp
tnb07_gm102_F_34_35 1/18/08 4:23 PM Page F-35
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
F-36
Angler®Pipe and Conduit Clamp
1
2
One-piece design snaps apart.
Clamp fits to the edge of conduit.
3
4
Hex head screw fits through keyhole.
Tighten with manual or power tool.
A difficult angle can make it time-consuming to fit a clamp to a pipe or conduit. The bent tab
design allows the bolt to extend up at a 30° angle, providing easy access to the bolt even
when clamps are installed side by side. Simply slide the pre-threaded bolt through the
keyhole-shaped opening and tighten. And no need to unscrew the bolt before installing!
Angled for Easy Tightening!
Easy to Install
• Easy tool access to the bolt with a screwdriver or power tool,
even when clamps are installed side by side
• Keyhole-shaped opening in the strap allows the bolt
to be fed through the strap without first being unthreaded
• One piece design — no disassembly needed, no parts to lose
or drop. Convenient to carry and store
• Fits snuggly to EMT, IMC, rigid, and standard pipe
• Embossed ribs strengthen the hooks connecting the
strap to the strut
• Highest load ratings of any universal break-apart
strap in the industry
• UL®Listed and CSA approved
• Integrated, rolled threading provides the same load
performance of a hex nut without the extra hardware
Pipe and
Conduit Clamp
®
NEW!
NEW!
tnb07_gm102_F_36_37 1/18/08 9:39 AM Page F-36
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
A-3
F-37
For EMT, IMC, Rigid and Standard Pipe
Angler®Pipe and Conduit Clamp
(continued)
Universal Series
CAT.
STRAP DESIGN INSTALL TORQUE STD.
NO.
SIZE THICKNESS LOAD (LBS.) (IN. LBS.) CTN.
Galv-Krom
®
Finish
C 109 1/2 1⁄2" 14 ga. 400 40 100
C 109 3/4 3⁄4" 14 ga. 500 40 100
C 109 1 1" 14 ga. 500 40 100
C 109 1 1/4 11⁄4" 14 ga. 500 40 100
C 109 1 1/2 11⁄2" 12 ga. 800 60 50
C 109 2 2" 12 ga. 800 60 50
C 109 2 1/2 21⁄2" 12 ga. 800 60 50
C 109 3 3" 12 ga. 800 60 50
C 109 3 1/2 31⁄2" 11 ga. 1,200 60 25
C 109 4 4" 11 ga. 1,200 60 25
SilverGalv
™
Finish
C 109 1/2 EG 1⁄2" 14 ga. 400 40 100
C 109 3/4 EG 3⁄4" 14 ga. 500 40 100
C 109 1 EG 1" 14 ga. 500 40 100
C 109 1 1/4 EG 11⁄4" 14 ga. 500 40 100
C 109 1 1/2 EG 11⁄2" 12 ga. 800 60 50
C 109 2 EG 2" 12 ga. 800 60 50
C 109 2 1/2 EG 21⁄2" 12 ga. 800 60 50
C 109 3 EG 3" 12 ga. 800 60 50
C 109 3 1/2 EG 31⁄2" 11 ga. 1,200 60 25
C 109 4 EG 4" 11 ga. 1,200 60 25
For Rigid Conduit and Standard Pipe
Rigid Series
CAT.
STRAP DESIGN INSTALL TORQUE STD.
NO.
SIZE THICKNESS LOAD (LBS.) (IN. LBS.) CTN.
Galv-Krom
®
Finish
C 109R 1/2 1⁄2" 14 ga. 600 40 100
C 109R 3/4 3⁄4" 14 ga. 600 40 100
C 109R 1 1" 14 ga. 600 40 100
C 109R 1 1/4 11⁄4" 14 ga. 600 40 100
C 109R 1 1/2 11⁄2" 12 ga. 800 60 50
C 109R 2 2" 12 ga. 800 60 50
C 109 2 1/2 21⁄2" 12 ga. 800 60 50
C 109 3 3" 12 ga. 800 60 50
C 109 3 1/2 31⁄2" 11 ga. 1,200 60 25
C 109 4 4" 11 ga. 1,200 60 25
SilverGalv
™
Finish
C 109R 1/2 EG 1⁄2" 14 ga. 600 40 100
C 109R 3/4 EG 3⁄4" 14 ga. 600 40 100
C 109R 1 EG 1" 14 ga. 600 40 100
C 109R 1 1/4 EG 11⁄4" 14 ga. 600 40 100
C 109R 1 1/2 EG 11⁄2" 12 ga. 800 60 50
C 109R 2 EG 2" 12 ga. 800 60 50
C 109 2 1/2 EG 21⁄2" 12 ga. 800 60 50
C 109 3 EG 3" 12 ga. 800 60 50
C 109 3 1/2 EG 31⁄2" 11 ga. 1,200 60 25
C 109 4 EG 4" 11 ga. 1,200 60 25
Hex head size
3
⁄
8
" for
1
⁄
2
" to 1
1
⁄
4
" sizes,
1
⁄
2
" for 1
1
⁄
2
" to 4" sizes.
Material: Stamped Steel.
Pipe sizes 2
1
⁄
2
" to 4" utilize the same clamps for the Rigid Series and the Universal Series.
NEW!
NEW!
tnb07_gm102_F_36_37 1/18/08 9:40 AM Page F-37
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
F-38
O.D. TUBING SIZES STANDARD PIPE SIZES
ASSEMBLY
TUBE
ASSEMBLY
NOMINAL STD.
PART #
O.D.
PART #
PIPE SIZE CTN.
Standard Finishes – GoldGalv
®
brand. Available in Stainless Steel — use
SS suffix. (i.e) A-716-1SS Electro-Galvanized (Silver) — use EG suffix.
(i.e) A-716-1EG
A-716-1/4 1⁄4P-716-1/4 1⁄425
A-716-3/8 3⁄8P-716-3/8 3⁄825
A-716-1/2 1⁄2P-716-1/2 1⁄225
A-716-5/8 5⁄8P-716-3/4 3⁄425
A-716-3/4 3⁄4P-716-1 125
A-716-7/8 7⁄8P-716-1-1/4 11⁄425
A-716-1 1P-716-1-1/2 11⁄210
A-716-1-1/8 11⁄8P-716-2 210
A-716-1-1/4 11⁄4P716-2-1/2 21⁄210
A-716-1-3/8 13⁄8P-716-3 310
A-716-1-1/2 11⁄2P-716-3-1/2 31⁄210
A-716-1-5/8 15⁄8P-716-4 410
A-716-1-3/4 13⁄4——10
A-716-1-7/8 17⁄8——10
A-716-2 2— —10
A-716-2-1/8 21⁄8——10
A-716-2-3/8 23⁄8——10
A-716-2-5/8 25⁄8——10
A-716-3-1/8 31⁄8——10
A716-4-1/8 41⁄8——10
•Assembly consisting of GoldGalv®finish steel clamp
with bolt/locknut and cushion
•Secure pipes, tubes and hoses for fluid conductors
•Installation is easy and requires no more time than
a simple pipe clamp installation
•Cushion absorbs the shocks and associated
vibrations from fluid surges in tubes, pipes
and hoses
•It can handle temperatures from -40°F to 300°F
•Cushioned Clamp assemblies are available
individually bagged
ASSEMBLY
COPPER AND COPPER NOMINAL
PART
STEEL TUBING WATER PIPE PIPE STD.
NUMBER
O.D. (NOM.) SIZE CTN.
Standard Finishes – GoldGalv
®
Brand
U716 1/4 1⁄4——25
U-716-3/8 3⁄81⁄425
U-716-1/2 1⁄23⁄81⁄425
U-716-5/8 5⁄81⁄23⁄825
U-716-3/4 3⁄45⁄825
U-716-7/8 7⁄83⁄41⁄225
U-716-1 1——25
U-716-1-1/8 11⁄81—25
U-716-1-1/4 11⁄4——10
U-716-1-3/8 13⁄811⁄4—10
U-716-1-1/2 11⁄2——10
U-716-1-5/8 15⁄811⁄2—10
U-716-1-3/4 13⁄4——10
U-716-1-7/8 17⁄8—1
1⁄210
U-716-2 2——10
U-716-2-1/8 21⁄8——10
U-716-2-3/8 23⁄8——10
U-717-3/4 ——
3⁄425
U-717-1 ——110
U-717-1-1/4 ——1
1⁄410
Standard Finish – GoldGalv
®
, unless otherwise stated.
•Guides, protects and uniformly spaces line runs.
Low cost, time saving method of attaching tubing
and hose to equipment
•Cushion is built to withstand the effects of most oils,
chemical and industrial cleaning compounds, in
temperatures from -50°F to 275°F. Interlock edge insures
cushion remains in place
•Clamp available in steel with the GoldGalv®hardware finish
•Attached with two standard fasteners to any flat surface,
this clamp eliminates the use of special channels, providing
a savings in both space requirements and cost
•Cushioned clamps reduce vibration, shock, and noise
in fluid systems and eliminates electrolysis
A-716
P-716
U-716
U-717
Pipe Straps
A-716 — Snap•Guard®Cushioned Clamp Tube
Series P-716 – Pipe Series
U-716, U-717 — Two Hole Cushioned Clamp
tnb07_gm102_F_38_39 1/18/08 4:23 PM Page F-38
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
A-3
F-39
HANGER, C-711
CAT.
NOMINAL OR WIDTH STD.
NO.
SIZE PIPE SIZE PIPE STRAP, 702 A CTN.
C716 1/2 1⁄21⁄23⁄423⁄8100
C-716-3/4 3⁄43⁄43⁄423⁄8100
C-716-1 11 1 2
3⁄8100
C-716-1-1/4 11⁄411⁄411⁄423⁄850
C-716-1-1/2 11⁄211⁄211⁄223⁄850
C-716-2 22 2
1⁄223⁄850
C-716-2-1/2 21⁄221⁄232
15⁄32 50
C-716-3 33 3
1⁄223⁄850
C-716-3-1/2 31⁄231⁄244
1⁄430
C-716-4 44 5 4
1⁄420
Order by Cat. No. and size.
Standard Finish – GoldGalv
®
, unless otherwise stated.
A
A
Pipe Straps
(continued)
C-716 — Isolator for Copper Tubing
Order 701 clamp separately
S716 — Cushioned Strip — For Isolation
and Vibration Applications
S716
Sold in a carton of 20 feet.
15⁄8"
A
B
For use with 701 O.D. tubing and pipe clamp. To determine 701 clamp
size add 1⁄4" to O.D. tube size to allow for the cushioned strip material.
1⁄4" markings for fast measuring and cutting. Measurement chart
is printed on back of carton. 20 feet included in each carton.
Prevent metal-to-metal contact with the cushioned strip material. It aids in
sound insulation, shock absorption and protects against corrosion, distortion
and abrasion. Cushioned strip material is designed for optimal use between
-30°F and 300°F. Cushioned strip material combined with the Superstrut
701 pipe strap can handle clamping assignments from 1⁄4" to 6.
CAT.
PIPE HOLE STOCK DESIGN STD.
NO.
SIZE A B SIZE SIZE LOAD LBS. CTN.
C-708-U-1/2 1⁄227⁄829⁄32 1⁄8x 15⁄8650 50
C-708-U-3/4 3⁄431⁄16 23⁄16 9⁄32 1⁄8x 15⁄8650 50
C-708-U-1 13
3⁄821⁄29⁄32 1⁄8x 15⁄8650 50
C-708-U-1-1/4 11⁄4311⁄16 23⁄16 9⁄32 1⁄8x 15⁄8650 25
C-708-U-1-1/2 11⁄2315⁄16 31⁄16 9⁄32 1⁄8x 15⁄8650 25
C-708-U-2 25
3⁄441⁄87⁄16 1⁄4x 15⁄8650 25
C-708-U-2-1/2 21⁄263⁄16 49⁄16 7⁄16 1⁄4x 15⁄81,000 25
C-708-U-3 36
3⁄16 53⁄16 7⁄16 1⁄4x 15⁄81,000 25
C-708-U-3-1/2 31⁄275⁄16 511⁄16 7⁄16 1⁄4x 115⁄32 1,000 25
C-708-U-4 47
13⁄16 63⁄16 7⁄16 1⁄4x1
15⁄32 1,200 25
C-708-U-5 58
7⁄871⁄47⁄16 1⁄4x 115⁄32 1,200 10
C-708-U-6 69
15⁄16 85⁄16 7⁄16 1⁄4x 15⁄81,200 10
Carbon Steel.
Standard Finish – GoldGalv
®
, unless otherwise stated.
Features
Designed for use with: Superstrut channel and pipe straps
and Superstrut C-711 Hangers and may also be used with
all standard flatbar or malleable iron hangers.
Materials
Manufactured from one-piece steel shell with
reinforcing ribs for stiffening and alignment. Padding
is of processed non-conducting hairfelt and is
cemented to the metal. Design of ribs creates a hinge
so isolator may be opened and closed to install.
Application
To provide a means to effectively isolate copper tubing from its
supports to prevent the transmission of sound and vibration.
C-708-U — Short Strap for Channel
or Wall Mounting
CUSH-A-STRIP
tnb07_gm102_F_38_39 1/18/08 4:23 PM Page F-39
Metal Framing, Pipe Hangers and Accessories
F-40
Pipe Straps, Conduit Clamps & Hangers
Cobra®
FOR EMT
AND RIGID STATIC LOAD
CAT.
CONDUIT CABLE O.D. LIMIT (LB) STD.
NO.
TRADE SIZE RANGE (IN.) SAFETY FACTOR = 4 CTN.
Electro-Galvanized Steel
CPC050 1⁄2" 0.650–0.890 200 100
CPC075 3⁄4" 0.860–1.110 200 100
CPC100 1" 1.100–1.400 200 100
CPC125 11⁄4" 1.400–1.725 200 50
CPC150 11⁄2" 1.690–1.980 200 50
CPC200 2" 1.980–2.576 200 50
CPC250 21⁄2" 2.576–3.060 350 25
CPC300 3" 3.060–3.626 350 25
CPC350 31⁄2" 3.626–4.126 350 25
CPC400 4" 4.126–4.626 350 25
Standard Finish – GoldGalv
®
, unless otherwise stated.
King Cobra®
FOR EMT
AND RIGID STATIC LOAD
CAT.
CONDUIT CABLE O.D. LIMIT (LB) STD.
NO.
TRADE SIZE RANGE (IN.) SAFETY FACTOR = 4 CTN.
GoldGalv
®
Finish
KCPC050 1⁄2" 0.650–0.890 350 100
KCPC075 3⁄4" 0.860–1.110 350 100
KCPC100 1" 1.100–1.400 350 100
KCPC125 11⁄4" 1.400–1.725 350 50
KCPC150 11⁄2" 1.690–1.980 350 50
KCPC200 2" 1.980–2.576 350 50
KCPC250 21⁄2" 2.576–3.060 350 25
KCPC300 3" 3.060–3.626 450 25
KCPC350 31⁄2" 3.626–4.126 450 25
KCPC400 4" 4.126–4.626 450 25
Standard Finish – GoldGalv
®
, unless otherwise stated.
NEW!
NEW!
Takes a bite out of your installation time!
•One-piece, heavy-duty construction ready
to install right out of the box, no need to
break apart and re-assemble, no screws
or bolts to drop
•Installs quickly and securely using
one hand
•Universal bolt head accepts a
range of tools
•Eliminates the guesswork from clamp
selection — one catalog number attaches
equal trade sizes of EMT and rigid conduit
•Parallel hook design keeps conduits
and cable square with strut
•Reconfigure wiring without complete
disassembly. Remove cables easily
without disturbing neighboring clamps
Cobra®One-Piece Cable
and Pipe Clamp
The New Specification Standard
for Heavy-Duty Industrial Applications.
King Cobra®Cable and Pipe
Clamp with GoldGalv®Finish
•Superior design load capabilities for
industrial applications: 350 lbs. for 1⁄2"
to 21⁄2" trade sizes; 450 lbs. for
3" to 4" trade sizes
•Durable one-piece, heavy-duty steel
construction — designed specifically
for use in industrial applications
•Embosses on shoulder and hooks
increase loading capability and durability,
preventing deformation of clamps
•Rugged stirrup provides increased strength
for heavier loads, minimizing deflection
•Wider saddle design with anti-rotation tabs
distributes load evenly over a larger surface area,
preventing jacket damage
•Increased corrosion protection* — GoldGalv®(yellow zinc
dichromate) finish stands up to harsh industrial applications
•Parallel hook design keeps conduit and cable square
with strut
•Heavy-duty 5⁄16" hex bolt
•One clamp size works on equal trade sizes for both EMT
and rigid conduit, simplifying clamp specification
* Compared to conventional electrogalvanization.
tnb07_gm102_F_40_41 1/18/08 9:39 AM Page F-40
Metal Framing, Pipe Hangers and Accessories
A-3
F-41
Pipe Straps, Conduit Clamps & Hangers
CONDUIT OR STEEL
PIPE SIZE STRAP O.D. STD.
CAT. NO.
(EMT, I.M.C., RIGID) THICKNESS SIZE CTN.
C-108-1/2 1⁄216 ga. 7⁄8100
C-108-3/4 3⁄416 ga. 15⁄64 100
C-108-1 1 16 ga. 111⁄32 100
C-108-1-1/4 11⁄414 ga. 111⁄16 50
C-108-1-1/2 11⁄214 ga. 115⁄16 50
C-108-2 2 14 ga. 213⁄32 50
•Fits E.M.T., I.M.C., rigid conduit
•Size range 1⁄2" through 2"
•Can be used on 11⁄2" or 15⁄8" channel
•Saves inventory dollars
•Corrosion resistant GoldGalv®
hardware finish
•One-piece construction means no
assembly required
•Installs directly over conduit for easy
installation
•50% reduction of installation time
•No twisting required to install
C-118 Medium-Duty Cable Clamp Standard Finish:
Pre-Galvanized (PG)
O.D. OF CABLE OR PIPE RIGID EMT STD.
CAT. NO.
IN. MM COND. COND. CTN.
Single
C118-047PG 0.27–0.47 7.5–12 — — 100
C118-055PG 0.4–0.55 10–14 — — 100
C118-070PG 0.5–0.7 13–18 3⁄8— 100
C118-090PG 0.6-0.9 15–23 1⁄21⁄2100
C118-110PG 0.85–1.1 21.5–29 3⁄43⁄4100
C118-140PG 1.1–1.4 28–36 1 1 100
C118-175PG 1.4–1.75 35.5–44 11⁄411⁄4–11⁄2100
C118-200PG 1.75–2.0 44.5–51 11⁄2— 100
C118-250PG 2.0–2.5 51–63.5 2 2 100
C118-300PG 2.5–3.0 63.5–76 21⁄221⁄225
C118-370PG 2.6–3.7 66–95 3 3 25
C118-410PG 3.5–4.1 89–105 31⁄231⁄210
C118-460PG 3.9–4.6 99–118 4 4 10
Standard Finish – GoldGalv
®
, unless otherwise stated.
C118
Single Cable Clamp
C-108 Universal Pipe Strap — EZ-Strap
0C-118 — Medium-Duty Cable Clamp
O.D. OF CABLE OR PIPE RIGID EMT STD.
CAT. NO.
IN. MM COND. COND. CTN.
Standard Finish: Pre-Galvanized (PG)
Double
C128-047PG 0.27–0.47 7.5–12 — — 100
C128-055PG 0.4–0.55 10–14 — — 100
C128-070PG 0.5–0.7 13–18 3⁄8— 100
C128-090PG 0.6–0.9 15–23 1⁄21⁄2100
C118-110PG 0.85–1.1 21.5–29 3⁄43⁄4100
C118-140PG 1.1–1.4 28–36 1 1 100
C128-175PG 1.4–1.75 35.5–44 11⁄411⁄4100
Triple
C138-047PG 0.27–0.47 7.5–12 — — 100
C138-055PG 0.4–0.55 10–14 — — 100
C138-070PG 0.5–0.7 13-18 3⁄8— 100
C138-090PG 0.6–0.9 15–23 1⁄21⁄2100
Standard Finish – GoldGalv
®
, unless otherwise stated.
C128
Double Cable Clamp
C188
Triple Cable Clamp
•Slotted hex head screw
tnb07_gm102_F_40_41 1/18/08 9:39 AM Page F-41
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
F-42
CB118
Counter Bed
EB118
Extended Bed
DB118
Double Bed
CH118
CH118 and CX118 Heavy-Duty Cable Clamp
FIG. EMT RIGID CABLE STD.
CAT. NO.
NO. SIZE SIZE O.D. (IN.) DESCRIPTION CTN.
CH118-055EG 13⁄8— 0.40–0.55 Conduit to strut clamp 100
CH118-081EG 11⁄23⁄80.50–0.70 Conduit to strut clamp 100
CH118-110EG 13⁄41⁄20.60–.090 Conduit to strut clamp 100
CH118-125EG 113⁄40.85–1.10 Conduit to strut clamp 100
CH118-135EG 11
1⁄41 1.10–1.40 Conduit to strut clamp 100
CH118-175PG 11
1⁄211⁄41.40–1.75 Conduit to strut clamp 100
CH118-205EG 121
1⁄21.75–2.00 Conduit to strut clamp 100
CH118-250EG 1 — 2 2.00–2.50 Conduit to strut clamp 100
CH118-300EG 12
1⁄221⁄22.50–3.00 Conduit to strut clamp 25
CH118-375EG 1 3 3 2.60–3.70 Conduit to strut clamp 25
CH118-425EG 13
1⁄231⁄23.50–4.10 Conduit to strut clamp 10
CH118-475EG 1 4 4 3.90–4.60 Conduit to strut clamp 10
CX118-081EG 21⁄23⁄8— Conduit to strut clamp without saddle 100
CX118-110EG 23⁄41⁄2— Conduit to strut clamp without saddle 100
CX118-125EG 213⁄4— Conduit to strut clamp without saddle 100
CX118-135EG 21
1⁄41 — Conduit to strut clamp without saddle 100
CX118-175PG 21
1⁄211⁄4— Conduit to strut clamp without saddle 100
CX118-205EG 221
1⁄2— Conduit to strut clamp without saddle 100
Available in double or triple configurations.
Example: Double —
CH128-047EG
Triple —
CH138-047EG
CAT.
STD.
NO.
CTN.
Double Bed
DB118-047PG 1
DB118-055PG 1
DB118-070PG 1
DB118-090PG 1
NOTE: Not Sold in pairs.
CAT.
STD.
NO.
CTN.
Extended Bed
EB118-047PG 100
EB118-055PG 100
EB118-070PG 100
EB118-090PG 100
EB118-110PG 100
EB118-140PG 100
EB118-175PG 1
EB118-200PG 1
EB118-250PG 1
EB118-300PG 1
CAT.
STD.
NO.
CTN.
Counter Bed
CB118-047PG 100
CB118-055PG 100
CB118-070PG 100
CB118-090PG 100
CB118-110PG 100
CB118-140PG 100
CB118-175PG 100
CB118-200PG 100
CB118-250PG 100
CB118-300PG 100
CB118 — Counter Bed EB118 — Extended Bed DB118 — Double Bed
Cable Clamps
tnb07_gm102_F_42_43 1/18/08 9:41 AM Page F-42
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
A-3
F-43
CAT. STD.
NO. HOLE SIZE A CTN.
C-755-1A 3⁄819⁄16 10
C-755-1B 1⁄219⁄16 10
C-755-1C 5⁄819⁄16 10
C-755-2 3⁄425⁄32 10
C-755-2A 7⁄825⁄32 10
C-755-2B 12
5⁄32 10
C-755-2C 11⁄825⁄32 10
C-755-3 11⁄425⁄810
C-755-3A 13⁄825⁄810
C-755-3B 11⁄225⁄810
C-755-3C 15⁄825⁄810
C-755-4 13⁄435⁄810
C-755-4A 17⁄835⁄810
C-755-4B 23
5⁄810
C-755-4C 21⁄835⁄810
C-755-5 21⁄441⁄410
C-755-5A 23⁄841⁄410
C-755-5B 21⁄241⁄410
C-755-5C 25⁄841⁄410
C-755-6 25⁄845⁄810
C-755-6A 27⁄845⁄810
C-755-6B 34
5⁄810
C-755-6C 31⁄845⁄810
C-755-7 31⁄4513⁄16 10
C-755-7A 33⁄8513⁄16 10
C-755-7B 31⁄2513⁄16 10
C-755-7C 35⁄8513⁄16 10
C-755-8 35⁄867⁄85
C-755-8A 37⁄867⁄85
C-755-8B 46
7⁄85
C-755-8C 41⁄867⁄85
C-755-8D 41⁄467⁄85
C-755-8E 43⁄867⁄85
C-755-8F 41⁄267⁄85
C-755
Hole Size
25⁄32
Hole
Size
25⁄32
Cable Clamps
(continued)
CAT.
NO.
HOLE SIZE A
C755 1ATP 3⁄81.36
C-755-1B-TP 1⁄21.36
C-755-1C-TP 5⁄81.36
C-755-2-TP 3⁄41.86
C-755-2A-TP 7⁄81.86
C-755-2B-TP 1 1.86
C-755-2C-TP 11⁄81.86
C-755-3-TP 11⁄42.36
C-755-3A-TP 13⁄82.36
C-755-3B-TP 11⁄22.36
C-755-3C-TP 15⁄82.36
C-755-4-TP 13⁄42.86
C-755-4A-TP 17⁄82.86
C-755-4B-TP 2 2.86
C-755-4C-TP 21⁄82.86
C-755-5-TP 21⁄43.36
C-755-5A-TP 23⁄83.36
CAT.
NO.
HOLE SIZE A
C-755-5B-TP 21⁄23.36
C-755-5C-TP 25⁄83.36
C-755-6-TP 23⁄43.86
C-755-6A-TP 27⁄83.86
C-755-6B-TP 3 3.86
C-755-6C-TP 31⁄83.86
C-755-7-TP 31⁄44.36
C-755-7A-TP 33⁄84.36
C-755-7B-TP 31⁄24.36
C-755-7C-TP 35⁄84.36
C-755-8-TP 33⁄44.86
C-755-8A-TP 37⁄84.86
C-755-8B-TP 4 4.86
C-755-8C-TP 41⁄84.86
C-755-8D-TP 41⁄45.24
C-755-8E-TP 43⁄85.24
C-755-8F-TP 41⁄25.24
C-755 —
Porcelain
Cable
Clamps
Finish – GoldGalv
®
brand with bronze hardware.
Also fits 1
1
⁄
2
" wide channel.
C-755 — TPE
An easy to use one-piece insulator made
from Sarlink 4339D, a flame retardant,
high hardness grade TPE polymer that is
U.L. listed. The tapered flange of the
insulator insures complete isolation and
protection of the cable. Options include a
Stainless Steel Clamp and hardware or an
Electro-Galvanized Clamp with Everdur nut
and bolt.
• Non-breakable TPE material
• Exceptional chemical resistance
• Dielectric strength of 640 volts
per mil
• Stainless Steel Clamps Type
304 or 316
• Electro-Galvanized Steel Clamps
with Everdur Nut and Bolt
• Flame retardant TPE insulator
• Excellent UV resistance
tnb07_gm102_F_42_43 1/18/08 9:42 AM Page F-43
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
F-44
Pipe Clamps
CAT.
STD.
NO.
PIPE SIZE CTN.
HS901 1⁄2" 500
HS902 3⁄4" 500
HS903 1 500
HS904 11⁄4" 250
HS905 11⁄2" 250
HS906 2 125
HS907 21⁄2" 125
HS908 3 100
HS909 31⁄2"75
HS910 450
Standard Finish — Galvanized.
Carbon steel.
Specify pipe size and catalog number.
Also available in stainless steel.
See price list for ordering information.
CAT.
STD.
NO.
PIPE SIZE CTN.
HS100 3⁄8" 500
HS101 1⁄2" 500
HS102 3⁄4" 500
HS103 1" 500
HS104 11⁄4" 250
HS105 11⁄2" 250
HS106 2" 50
HS107 21⁄2"25
HS108 3" 25
HS109 31⁄2"25
HS110 4" 25
SIZE FINISH STYLE
3⁄4x 24 ga. Plain Steel Coils
3⁄4x 20 ga. Plain Steel Coils
3⁄4x 24 ga. Pre-Galvanized Coils
3⁄4x 20 ga. Pre-Galvanized Coils
Perforated Hanger Strapping.
Standard Finish — Plain Steel or Galvanized.
Carbon steel.
Specify size, finish and catalog number.
Available in 50' and 100' coils.
Stainless steel sizes available on request.
Standard Finish – GoldGalv
®
, unless otherwise stated.
NOTE: This product is not designed to be supported with rods. Install using the
maximum suggested torque values shown in the Technical Section of this catalog.
Material: Carbon Steel.
Compliance: Federal Specification A-A-1192A Type 8, MSS-SP-69
(Type 8) and BSPSS-BS3974.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify catalog number, finish and pipe size.
C-720, C-720SS
C-720, C-720SS
CAT.
PIPE MAX. WT.
NO.
SIZE LOAD A EACH
C-720-1/2 1⁄2" 255 9 1.00
C-720-3/4 3⁄4" 255 87⁄81.08
C-720-1 1" 255 87⁄81.08
C-720-1-1/4 11⁄4" 255 10 1.86
C-720-1-1/2 11⁄2" 255 101⁄41.22
C-720-2 2" 255 101⁄41.30
C-720-2-1/2 21⁄2" 390 111⁄41.74
C-720-3 3" 530 113⁄81.98
C-720-3-1/2 31⁄2" 670 127⁄82.14
C-720-4 4" 810 127⁄82.28
C-720-5 5" 1,160 133⁄43.60
C-720-6 6" 1,570 143⁄43.68
C-720-8 8" 2,500 181⁄27.26
C720 10 10" 2,500 203⁄411.00
C-720-12 12" 2,700 223⁄415.94
C-720-14 14" 2,700 24 17.36
C-720-16 16" 2,900 26 29.68
C-720-18 18" 2,900 28 31.64
C-720-20 20" 2,900 30 34.84
C-720-24 24" 2,900 34 50.00
Standard Finish – GoldGalv
®
, unless otherwise stated.
Designed for the support or steadying of vertical pipe risers. It is made of
carbon steel and is designed to hold tight to the pipe, transmitting the load
to the structure through the ears on each end. When possible, the clamp
should be placed under a coupling, hub or lugs welded to the pipe.
C-720, C-720SS — Extension Riser Clamp
HS Series Two-Hole Pipe Strap HS Series One-Hole Pipe Straps Strap 2250 (B, PG),
Strap 2450 (B, PG)
tnb07_gm102_F_44_45 1/18/08 4:23 PM Page F-44
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
A-3
F-45
Pipe Clamps
(continued)
C-720P — PVC Coated Riser Clamp
The C-720P is normally used for the support of uninsulated
vertical piping where no movement will occur. PVC coating the
contact surface prevents galvanic corrosion with the pipe.
Please use our C-720 for carbon steel piping or CT-720 for
copper tubing requirements.
NOTE: This product is not designed to be supported with rods. Install using
the maximum suggested torque values shown in the Technical Section of
this catalog.
Material: Carbon Steel.
Compliance: Federal Specification A-A-1192A Type 8,
MSS-SP-69 T1400°F / 600°C.
Finish: Polyvinyl Chloride.
Ordering: Specify pipe size and catalog number.
C-720P
CAT.
PIPE MAX. WT.
NO.
SIZE LOAD A EACH
C720P-1/2 1⁄2" 225 93⁄81.30
C-720P-3/4 3⁄4" 225 93⁄81.36
C-720P-1 1" 225 95⁄81.38
C-720P-1-1/4 11⁄4" 225 10 1.95
C-720P-1-1/2 11⁄2" 225 103⁄82.01
C-720P-2 2" 225 103⁄42.17
C-720P-2-1/2 21⁄2" 390 111⁄42.29
C-720P-3 3" 530 12 2.50
C-720P-4 4" 810 131⁄23.42
Standard Finish – GoldGalv
®
, unless otherwise stated.
C-720P
PVC Coating
4"
4"
A
CX-725 — Extended Offset Pipe Clamp
CAT.
PIPE WT.
NO.
SIZE A B EACH
CX-725-3/8 3⁄812 33⁄41.85
CX-725-1/2 1⁄212 33⁄41.85
CX-725-3/4 3⁄412 43⁄41.85
CX-725-1 1125
1⁄22.34
CX-725-1-1/4 11⁄412 57⁄82.40
CX-725-1-1/2 11⁄212 61⁄82.45
CX-725-2 2 12 7 3.13
CX-725-2-1/2 21⁄212 71⁄24.21
CX-725-3 3127
7⁄84.47
CX-725-4 41210
1⁄24.90
CX-725-5 51212
1⁄44.90
CX-725-6 6 12 13 5.32
CX-725-8 81215
1⁄411.20
CX-725-10 10 12 181⁄413.50
CX-725-12 12 12 203⁄422.00
CX-725-14 14 12 21 35.00
Standard Finish – GoldGalv
®
, unless otherwise stated.
CX-725
Designed to attach directly to piping where the exact distance between the
structure and the pipe cannot be determined until the piping is in place. The
extended legs can be modified in the field to suit the location. Legs of longer
lengths can be furnished on order.
Material: Carbon Steel.
Finish: Standard Finish —
Black (add suffix “-B”),
Electro-Galvanized
(add suffix “-EG”).
Ordering: Specify pipe size,
catalog number,
and finish. A
B
C-720L — Offset Pipe Clamp
The Offset Pipe Clamp is used on pipe lines running at a fixed distance
from a wall or floor. The standard clearance is two inches from the O.D. of
pipe to the face of the surface. Non-standard clearances can be fabricated
upon request.
Material: Carbon Steel.
Load Rating: Up to 650°F (343°C).
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”)
Ordering: Specify pipe size, catalog number and finish.
C-720L
CAT.
PIPE MAX. WT.
NO.
SIZE LOAD A B C EACH
C-720L-1/2 1⁄2190 27⁄16 81⁄27⁄16 1.1
C-720L-3/4 3⁄4190 23⁄483⁄47⁄16 1.3
C-720L-1 1 190 27⁄891⁄47⁄16 1.4
C-720L-1-1/4 11⁄4190 31⁄16 93⁄47⁄16 1.5
C-720L-1-1/2 11⁄2190 33⁄16 10 7⁄16 1.6
C-720L-2 2 420 31⁄2111⁄49⁄16 2.8
C-720L-2-1/2 21⁄2420 33⁄4113⁄49⁄16 2.9
C-720L-3 3 420 41⁄16 127⁄89⁄16 3.2
C-720L-4 4 610 49⁄16 137⁄89⁄16 4.2
C-720L-5 5 610 51⁄16 155⁄811⁄16 6.5
C-720L-6 6 870 55⁄8163⁄411⁄16 7.2
C-720L-8 8 870 65⁄8183⁄411⁄16 8.3
C-720L-10 10 1,050 73⁄8211⁄213⁄16 12.4
C-720L-12 12 1,200 83⁄8247⁄813⁄16 21.0
Standard Finish – GoldGalv
®
, unless otherwise stated.
A
B
C
tnb07_gm102_F_44_45 1/18/08 4:23 PM Page F-45
Metal Framing, Pipe Hangers and Accessories
F-46
Pipe Straps, Conduit Clamps & Hangers
CT-720 — Copper Riser Clamp
CT-720
CAT.
TUBE MAX. WT.
NO.
SIZE LOAD A EACH
CT-720-1/2 1⁄2220 93⁄16 0.70
CT-720-3/4 3⁄4220 93⁄16 0.74
CT720 1 1 220 91⁄20.75
CT-720-1-1/4 11⁄4220 93⁄40.77
CT-720-1-1/2 11⁄2220 101⁄80.80
CT-720-2 2 220 101⁄20.84
CT-720-2-1/2 21⁄2390 11 1.60
CT-720-3 3 530 115⁄81.80
CT-720-3-1/2 31⁄2530 125⁄81.95
CT-720-4 4 530 131⁄82.04
CT-720-5 5 810 14 3.50
CT-720-6 6 1,570 15 5.25
Standard Finish – GoldGalv
®
, unless otherwise stated.
CT-720
Normally used for the support of uninsulated vertical tubing where
no movement will occur. Please use C-720 for carbon steel piping
or C-720P for plastic coating requirements.
NOTE: This product is not designed to be supported with rods. Install using the
maximum suggested torque values shown in the Technical Section of this catalog.
Material: Carbon Steel.
Compliance: Federal Specification A-A-1192A Type 8, MSS-SP-69 Type 8.
Finish: Copper.
Ordering: Specify tubing size and catalog number.
C-724 — Ductile Iron Pipe Clamp
C-724
CAT.
PIPE ACTUAL WASHER WT.
NO.
SIZE PIPE O.D. A SIZE EACH
C-724-3 3 3.96 121⁄43⁄49.00
C-724-4 4 4.8 133⁄43⁄49.00
C-724-6 6 6.9 153⁄43⁄410.70
C-724-8 8 9.05 18 33⁄412.20
C-724-10 10 11.1 201⁄83⁄414.60
C-724-12 12 13.2 227⁄83⁄416.60
C-724-14 14 15.3 251⁄211⁄441.90
C-724-16 16 17.4 28 11⁄461.90
C-724-18 18 19.5 33 11⁄465.10
C-724-20 20 21.6 351⁄211⁄292.20
C-724-24 24 25.8 401⁄211⁄2122.70
C-724-30 30 32 48 11⁄2184.00
Standard Finish – GoldGalv
®
, unless otherwise stated.
Can be used to secure mechanical joint piping or socket fittings together to
prevent separation under pressure either under or above ground, vertically
or horizontally. If using in this fashion two (2) W-724 Socket Clamp Washers
and Figure 133 Rods are also required, but must be ordered separately. The
C-724 may also be used to support and guide vertical Ductile Iron pipe.
Materials: Carbon Steel.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”)
Ordering: Specify pipe size, catalog number, and finish.
C-724
Pipe Clamps
A
4" 4"
A
tnb07_gm102_F_46_47 1/18/08 5:04 PM Page F-46
Metal Framing, Pipe Hangers and Accessories
A-3
F-47
Pipe Straps, Conduit Clamps & Hangers
C-725 — Two Bolt Pipe Clamp
C-725
MAXIMUM LOAD
CAT.
PIPE 650°F/ 750°F/ ROD TAKE WT.
NO.
SIZE 343°C 343°C C OUT D E F EACH
C725 1/2 1⁄2500 445 3⁄811⁄815⁄83⁄80.31
C-725-3/4 3⁄4500 445 3⁄811⁄413⁄43⁄80.35
C-725-1 1 500 445 3⁄813⁄817⁄83⁄80.39
C-725-1-1/4 11⁄4500 445 3⁄815⁄821⁄83⁄80.40
C-725-1-1/2 11⁄2800 715 3⁄813⁄421⁄43⁄80.45
C-725-2 2 1,040 930 1⁄221⁄825⁄81⁄21.23
C-725-2-1/2 21⁄21,040 930 5⁄825⁄831⁄81⁄21.33
C-725-3 3 1,040 930 5⁄833
1⁄21⁄21.53
C-725-4 4 1,040 930 3⁄435⁄843⁄81⁄2 2.20
C-725-5 5 1,040 930 3⁄441⁄451⁄22.39
C-725-6 6 1,615 1,440 7⁄851⁄461⁄43⁄45.87
C-725-8 8 1,615 1,440 1 63⁄873⁄83⁄46.95
C-725-10 10 2,490 2,220 1 75⁄883⁄47⁄814.39
C-725-12 12 2,490 2,220 11⁄883⁄4101⁄47⁄816.73
C-725-14 14 2,490 2,220 11⁄891⁄4105⁄87⁄821.26
C-725-16 16 2,490 2,220 11⁄8101⁄4115⁄87⁄823.39
C-725-18 18 3,060 2,730 11⁄4115⁄813 1 32.96
C-725-20 20 3,060 2,730 13⁄8123⁄4141⁄811⁄836.74
C-725-24 24 3,060 2,730 11⁄2151⁄4167⁄811⁄852.96
C-725-30 30 3,500 3,360 2 181⁄2203⁄411⁄2103.50
Standard Finish – GoldGalv
®
, unless otherwise stated.
Designed to suspend cold or hot pipe lines where little or no insulation is
required. The C-725 is usually used with an E-120-A Weldless Eyenut,
or E-157 Welded Eyerod. See Figure 298 Heavy-duty Two Bolt Clamp when
higher loads are required. We will also design to meet special requirements
such as special pipe sizes.
Rated Loads are for up to 750°F (399°C).
Material: Carbon Steel.
Compliance: Federal Specification A-A-1192A Type 4, MSS-SP-69
Type 4 and BSPSS-BS3974.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify catalog number, finish and pipe size.
Also, include any special requirements for C-725.
C-725
Pipe Clamps
FC
D
D
E
E
C
tnb07_gm102_F_46_47 1/18/08 5:04 PM Page F-47
Metal Framing, Pipe Hangers and Accessories
F-48
Pipe Straps, Conduit Clamps & Hangers
C-726 — Three Bolt Pipe Clamp
C-726
MAXIMUM LOAD
CAT.
PIPE 650°F/ 750°F/ TAKE WT.
NO.
SIZE 343°C 399°C B C D OUT E F H EACH
C-726-1/2 1⁄2950 845 1 5⁄827⁄821⁄43⁄815⁄80.61
C-726-3/4 3⁄4950 845 11⁄85⁄831⁄421⁄23⁄813⁄40.66
C-726-1 1 950 845 11⁄2 5⁄833⁄421⁄23⁄821⁄40.69
C-726--1/4 11⁄4950 845 11⁄23⁄435⁄827⁄83⁄821⁄40.75
C-726-1-3/4 13⁄41,545 1,380 13⁄414
7⁄841⁄45⁄821⁄22.14
C-726-2 2 1,545 1,380 21⁄411⁄457⁄851⁄45⁄823⁄42.43
C-726-2-3/4 23⁄41,545 1,380 21⁄411⁄461⁄453⁄85⁄83 2.92
C-726-3 3 1,545 1,380 23⁄411⁄465⁄865⁄831⁄23.19
C-726-4 4 2,500 2,230 33⁄817
5⁄861⁄23⁄441⁄27.12
C-726-5 5 2,500 2,230 4 11⁄481⁄47 3⁄451⁄47.96
C-726-6 6 2,865 2,555 43⁄411⁄495⁄881⁄47⁄861⁄411.85
C-726-8 8 2,865 2,555 53⁄411⁄4105⁄891⁄47⁄871⁄413.59
C-726-10 10 3,240 2,890 67⁄811⁄412 101⁄218
1⁄421.33
C-726-12 12 3,240 2,890 83⁄811⁄213 111⁄219
7⁄823.65
C-726-14 14 4,300 3,835 91⁄4214
3⁄8123⁄411⁄4103⁄438.78
C-726-16 16 4,300 3,835 10 2 155⁄814 11⁄4113⁄442.89
C-726-18 18 4,300 3,835 115⁄8216
3⁄4151⁄411⁄4131⁄446.35
C-726-20 20 4,500 4,015 123⁄8217
1⁄2157⁄813⁄814 58.67
C-726-24 24 5,490 4,900 143⁄4219
7⁄8177⁄811⁄2163⁄889.32
C-726-30 30 7,500 6,690 181⁄211⁄2263⁄8233⁄811⁄221 140.89
C-726-36 36 1,0500 9,360 221⁄2332
1⁄428f 13⁄426 246.44
Standard Finish – GoldGalv
®
unless otherwise stated.
Designed for hot insulated pipe lines up to 750°F. The spacer on the top inner bolt
provides uniform space for the connecting eyerod or weldless eyenut. We will also
design to meet special requirements such as special pipe sizes.
Rated Loads are for up to 750°F (399°C).
Material: Carbon Steel.
Compliance: Federal Specification A-A-1192A Type 3,
MSS-SP-69 Type 3 and BSPSS-BS3974.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify catalog number, and pipe size. Also, include
any special requirements.
C-725
Pipe Clamps
FC
E
B
D
H
tnb07_gm102_F_48_49 1/18/08 9:40 AM Page F-48
A-3
F-49
Pipe Straps, Conduit Clamps & Hangers
A-726 — Alloy Three-Bolt Pipe Clamp
Designed for hot insulated pipelines. The spacer on the top inner bolt
provides uniform space for the connecting eyerod or weldless eyenut.
Temperature range: above 750°F (399°C) to 1050°F (566°C).
Material: Chrome Molybdenum Steel, ASTM A-387 Grade 22.
Compliance: Federal Specification A-A-1192A Type 3,
MSS-SP-69 Type 3 and BSPSS-BS3974.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify catalog number, and pipe size.
A-726
A-726
MAXIMUM LOAD
CAT.
PIPE 950°F/ 1000°F/ 1050°F TAKE WT.
NO.
SIZE 510°C 538°C 566°C B C D OUT E F H EACH
A-726-3/4 3⁄4870 600 440 11⁄85⁄832
1⁄23⁄815⁄81.09
A-726-1 1 870 600 440 11⁄45⁄831⁄825⁄83⁄813⁄41.14
A-726-1-1/4 11⁄4870 600 440 11⁄23⁄433⁄427⁄83⁄821⁄41.23
A-726-1-1/2 11⁄21,400 1,000 700 13⁄414
7⁄841⁄85⁄823⁄82.48
A-726-2 2 1,400 1,000 700 21⁄815
7⁄851⁄85⁄823⁄42.70
A-726-2-1/2 21⁄21,400 1,000 700 21⁄416
1⁄853⁄85⁄83 2.76
A-726-3 3 1,400 1,000 700 23⁄416
3⁄465⁄831⁄23.19
A-726-4 4 2,300 1,600 1,100 33⁄817
5⁄861⁄23⁄441⁄27.30
A-726-5 5 2,300 1,600 1,100 4 11⁄881⁄873⁄451⁄87.96
A-726-6 6 2,600 1,800 1,300 43⁄411⁄410 85⁄87⁄861⁄812.26
A-726-8 8 2,600 1,800 1,300 53⁄411⁄411 95⁄87⁄871⁄814.04
A-726-10 10 3,000 2,100 1,500 67⁄811⁄412 101⁄218
1⁄421.33
A-726-12 12 3,000 2,100 1,500 83⁄811⁄2131⁄8115⁄819
7⁄824.00
A-726-14 14 3,900 2,800 2,000 91⁄8214
1⁄8123⁄411⁄4103⁄438.78
A-726-16 16 3,900 2,800 2,000 10 2 151⁄814 11⁄4113⁄443.13
A-726-18 18 39 2,800 2,000 115⁄8216
3⁄4151⁄811⁄4131⁄447.78
A-726-20 20 5,000 3,200 2,000 123⁄8217
1⁄2157⁄811⁄814 58.67
A-726-24 24 5,500 3,500 2,700 143⁄411⁄2197⁄8177⁄811⁄2163⁄890.82
Standard Finish – GoldGalv
®
, unless otherwise stated.
Pipe Clamps
FC
E
B
D
H
Metal Framing, Pipe Hangers and Accessories
tnb07_gm102_F_48_49 1/31/08 8:53 AM Page F-49
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
F-50
Pipe Hangers
CAT.
PIPE MAX. WT.
NO.
SIZE LOAD A C D EACH
C-704-1/2 1⁄2200 69⁄32 59⁄16 0.51
C-704-3/4 3⁄4200 61⁄859⁄16 0.53
C-704-1 1 200 69⁄16 59⁄16 0.80
C-704-1-1/4 11⁄4200 65⁄859⁄16 0.83
C-704-1-1/2 11⁄2200 611⁄16 59⁄16 0.87
C-704-2 2 200 73⁄32 59⁄16 0.93
C-704-2-1/2 21⁄2350 715⁄32 59⁄16 1.16
C-704-3 3 350 75⁄859⁄16 1.27
C-704-3-1/2 31⁄2350 81⁄32 59⁄16 1.37
C-704-4 4 350 89⁄16 59⁄16 2.19
C-704-5 5 450 9 5 9⁄16 3.50
C-704-6 6 450 93⁄859⁄16 4.15
Standard Finish – GoldGalv
®
, unless otherwise stated.
C-704
Designed to support light duty pipe lines
that run next to walls or beams.
Material: Carbon Steel.
Finish: Standard Finish – GoldGalv®,
Black (add suffix “-B”), Electro-
Galvanized (add suffix “-EG”)
Ordering: Specify pipe size and catalog
number.
C
D
A
CAT.
PIPE MAX. WT.
NO.
SIZE LOAD A B D EACH
C-704-1/2 1⁄2200 69⁄32 15⁄89⁄16 0.53
C-704-3/4 3⁄4200 61⁄8111⁄16 9⁄16 0.55
C-704-1 1 200 69⁄16 17⁄89⁄16 0.81
C-704-1-1/4 11⁄4200 65⁄821⁄16 9⁄16 0.84
C-704-1-1/2 11⁄2200 611⁄16 23⁄16 9⁄16 0.89
C-704-2 2 200 73⁄32 25⁄89⁄16 0.96
C-704-2-1/2 21⁄2350 715⁄32 211⁄16 9⁄16 1.26
C-704-3 3 350 75⁄839⁄16 1.38
C-704-3-1/2 31⁄2350 81⁄32 31⁄49⁄16 1.47
C-704-4 4 450 89⁄16 35⁄89⁄16 2.39
C-704-5 5 450 9 43⁄16 9⁄16 3.90
C-704-6 6 450 93⁄8411⁄16 9⁄16 4.25
Standard Finish – GoldGalv
®
, unless otherwise stated.
C-704-A
Designed to support light duty pipe l
ines with clearance requirements
that run along walls or beams.
Material: Carbon Steel.
Finish: Standard Finish – GoldGalv®,
Black (add suffix “-B”), Electro-
Galvanized (add suffix “-EG”).
Ordering: Specify pipe size and catalog number.
Designed to support non-insulated, stationary lines from
above allowing for approximately 1" to 11⁄2" of vertical
adjustment after the pipe is in place. The lower nut (not
furnished) adjusts the pipe line to the proper elevation, the
top nut (not furnished) prevents loosening due to vibration,
and must be tightened securely to assure proper hanger
performance.
Rated Loads are for up to 650°F (343°C) for carbon steel.
Maximum PVC temperature is 140°F (60°C).
CAT.
PIPE MAX. ROD TAKE WT.
NO.
SIZE LOAD A B C OUT E EACH
C-710-1/2 1⁄2610 3⁄823⁄431⁄817⁄80.27
C-710-3/4 3⁄4610 3⁄821⁄823⁄411⁄20.29
C-710-1 1 610 3⁄833
3⁄421⁄40.33
C-710-1-1/4 11⁄8610 3⁄831⁄842
1⁄40.36
C-710-101/2 11⁄2610 3⁄831⁄441⁄423⁄80.42
C-710-2 2 610 3⁄833⁄845⁄831⁄80.52
C-710-2-1/2 21⁄21,130 1⁄241⁄855⁄831⁄80.61
C-710-3 3 1,130 1⁄256
3⁄441⁄80.90
C-710-3-1/2 31⁄21,130 1⁄241⁄265⁄835⁄80.99
C-710-4 4 1,430 5⁄853⁄873⁄443⁄81.40
C-710-5 5 1,430 5⁄868
7⁄85 2.10
C-710-6 6 1,940 3⁄4710
1⁄257⁄83.00
Standard Finish – GoldGalv
®
, unless otherwise stated.
CAT.
PIPE MAX. ROD TAKE WT.
NO.
SIZE LOAD A B C OUT E EACH
C-710-7 7 2,000 3⁄475⁄8113⁄461⁄25.42
C-710-8 8 2,000 3⁄481⁄2123⁄463⁄45.25
C-710-10 10 3,600 7⁄810 153⁄881⁄49.10
C-710-12 12 3,800 7⁄8111⁄8171⁄291⁄411.75
C-710-14 14 4,200 1 121⁄2191⁄2105⁄814.25
C-710-16 16 4,800 1 15 23 131⁄820.75
C-710-18 18 4,800 11⁄4153⁄4243⁄4133⁄423.00
C-710-20 20 4,800 11⁄4173⁄8273⁄8151⁄441.50
C-710-24 24 4,800 11⁄4195⁄8315⁄8171⁄250.00
C-710-30 30 6,000 11⁄4243⁄4403⁄4213⁄468.08
C-710-36 36 9,500 11⁄2327⁄8507⁄830 68.68
Standard Finish – GoldGalv
®
, unless otherwise stated.
C-710
B
5"
1"
D
A
A
B
C
E
C-704 — Return
Line Hook
C-704-A — Return Line
Offset Hook
C-710, C-710F, C-710P, C-710SS Material: Carbon Steel (Also available in
Stainless Steel as C-710SS).
Compliance: Federal Specification A-A-1192A
Type 1, MSS-SP-69 Type 1, BSPSS-
BS3974, U.L. and F.M.
Finish: Standard Finish – GoldGalv®, Black
(add suffix “-B”), Electro-Galvanized
(add suffix “-EG”).
Ordering: Specify catalog number, finish and
pipe size.
tnb07_gm102_F_50_51 1/18/08 9:40 AM Page F-50
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
A-3
F-51
Pipe Hangers (continued)
CL-710
CAT.
PIPE MAX. WT.
NO.
SIZE LOAD A B C E EACH
CL710 1/2 1
⁄2150 3⁄817⁄823⁄83⁄4
0.27
CL-710-3/4
3⁄4250 3⁄823⁄827⁄811⁄2
0.29
CL-710-1 1 250
3⁄823⁄837⁄815⁄8
0.33
CL-710-1-1/4 11⁄4250
3⁄827⁄833⁄421⁄8
0.36
CL-710-1-1/2 11⁄2250
3⁄8342
1⁄4
0.42
CL-710-2 2 250
3⁄831⁄243⁄423⁄4
0.52
CL-710-2-1/2 21⁄2350
1⁄245
1⁄227⁄8
0.81
CL-710-3 3 350
1⁄241⁄461⁄831⁄4
0.90
CL-710-3-1/2 31⁄2350
1⁄243⁄861⁄233⁄8
0.99
CL-710-4 4 400
5⁄851⁄277⁄843⁄8
1.40
Standard Finish – GoldGalv
®
, unless otherwise stated.
CL-710
CL-710 — Light-Duty Clevis Hanger CTL-710 — Copper Clevis Hanger
CTL-710
CAT.
PIPE MAX. ROD TAKE WT.
NO.
SIZE LOAD A B C OUT E EACH
CTL710 1/2 1⁄2150 3⁄827⁄831⁄821⁄40.16
CTL-710-3/4 3⁄4250 3⁄825⁄831
7⁄80.16
CTL-710-1 1 250 3⁄825⁄831⁄817⁄80.19
CTL-710-1-1/4 11⁄4250 3⁄831⁄833⁄423⁄80.22
CTL-710-1-1/2 11⁄2250 3⁄833⁄841⁄825⁄80.29
CTL-710-2 2 250 3⁄833⁄843⁄825⁄80.32
CTL-710-2-1/2 21⁄2350 1⁄235⁄847⁄825⁄80.72
CTL-710-3 3 350 1⁄237⁄853⁄827⁄80.82
CTL-710-3-1/2 31⁄2350 1⁄241⁄857⁄831⁄80.91
CTL-710-4 4 350 1⁄241⁄261⁄431⁄21.07
CTL-710-5 5 900 5⁄857
3⁄437⁄81.76
CTL-710-6 6 900 5⁄853⁄487⁄845⁄81.92
Standard Finish – GoldGalv
®
, unless otherwise stated.
CTL-710
Designed to support non-insulated, stationary copper tubing lines from
above, allowing for approximately 1" to 11⁄2" of vertical adjustment after
the tubing is in place. The lower nut (not furnished) adjusts the pipe line
to the proper elevation. The top nut (not furnished) prevents loosening
due to vibration, and must be tightened securely to assure proper
hanger performance.
Material: Carbon Steel.
Compliance: Federal Specification A-A-1192A Type 1, MSS-SP-69
Type 1 and BSPSS-BS3974. Rated Loads are for
up to 650°F (343°C).
Finish: Copper.
Ordering: Specify tubing size and catalog number.
A
B
C
E
A
B
C
E
Designed to support non-insulated, stationary lines from above allowing for
approximately 1" to 11⁄2" of vertical adjustment after the pipe is in place. The
lower nut (not furnished) adjusts the pipe line to the proper elevation, the
top nut (not furnished) prevents loosening due to vibration, and must be
tightened securely to assure proper hanger performance.
Material: Carbon Steel.
Compliance: Federal Specification A-A-1192A Type 1, MSS-SP-69 Type 1.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify catalog number, finish and pipe size.
tnb07_gm102_F_50_51 1/18/08 9:40 AM Page F-51
Metal Framing, Pipe Hangers and Accessories
F-52
Pipe Straps, Conduit Clamps & Hangers
C
E
F
B
OF PIPE
Pipe Hangers
(continued)
A
ETL-710 — Light-Duty Clevis Hanger
ETL-710 — Light-Duty Clevis Hanger
TUBING MATERIAL STD.
CAT. NO.
SIZE SIZE A B C E F CTN.
ETL710 1/2 1⁄216 ga x 7⁄83⁄8113⁄16 23⁄16 11⁄49⁄16 100
ETL-710-3/4 3⁄416 ga x 7⁄83⁄813⁄421⁄411⁄49⁄16 100
ETL-710-1 1 16 ga x 7⁄83⁄815⁄825⁄16 11⁄81⁄2100
ETL-710-1-1/4 11⁄416 ga x 7⁄83⁄822
3⁄411⁄811⁄16 100
ETL-710-1-1/2 11⁄216 ga x 7⁄83⁄823⁄831⁄811⁄41 100
ETL-710-2 2 13 ga x 7⁄83⁄8211⁄16 41
1⁄211⁄16 100
ETL-710-2-1/2 21⁄21⁄8x 11⁄41⁄231⁄4411⁄16 21
1⁄8100
ETL-710-3 31⁄8x 11⁄41⁄231⁄253⁄16 21⁄413⁄16 100
ETL-710-3-1/2 31⁄21⁄8x 11⁄41⁄233⁄4511⁄16 21⁄211⁄8100
ETL-710-4 41⁄8x 11⁄41⁄245⁄16 61⁄231
3⁄16 100
ETL-710-5 53⁄16 x 11⁄45⁄857
11⁄16 33⁄813⁄16 50
ETL-710-6 63⁄16 x 11⁄45⁄8511⁄16 87⁄841⁄811⁄450
Standard Finish – GoldGalv
®
.
Carbon Steel.
Copper tube sized.
For the suspension of stationary copper tubing lines. Order by Cat. No., tubing size.
C
L
tnb07_gm102_F_52_53 1/18/08 9:37 AM Page F-52
Metal Framing, Pipe Hangers and Accessories
A-3
F-53
Pipe Straps, Conduit Clamps & Hangers
Pipe Hangers
(continued)
CX-710 — Elongated Clevis Hanger
CX-710
CAT.
PIPE MAX. WT.
NO.
SIZE LOAD A B C E F EACH
CX-710-1/2 1⁄2600 3⁄833⁄441⁄431⁄25⁄80.66
CX-710-3/4 3⁄4600 3⁄841⁄447⁄837⁄85⁄80.70
CX-710-1 1 600 3⁄851⁄853⁄443⁄415⁄80.74
CX-710-1-1/4 11⁄4600 3⁄853⁄861⁄847⁄815⁄80.78
CX-710-1-1/2 11⁄2600 3⁄851⁄263⁄851
1⁄20.81
CX-710-2 2 600 3⁄875⁄883⁄471⁄815⁄80.88
CX-710-2-1/2 21⁄21,100 1⁄277⁄891⁄471⁄411⁄81.83
CX-710-3 3 1,100 1⁄281⁄897⁄871⁄211⁄81.97
CX-710-3-1/2 31⁄21,100 1⁄283⁄8103⁄873⁄411⁄42.06
CX-710-4 4 1,400 5⁄895⁄8117⁄887⁄813⁄42.57
CX-710-5 5 1,400 5⁄8103⁄8131⁄895⁄817⁄83.00
CX-710-6 6 1,900 3⁄4107⁄8141⁄810 15⁄84.05
CX-710-8 8 2,000 7⁄8125⁄8167⁄8115⁄821⁄86.00
CX-710-10 10 3,600 7⁄8131⁄4185⁄8121⁄823⁄810.10
CX-710-12 12 3,800 7⁄8153⁄4221⁄8145⁄825⁄812.90
Standard Finish – GoldGalv
®
, unless otherwise stated.
CX-710
Designed for the suspension of insulated stationary pipe lines. It will
accommodate 2" of insulation up to 11⁄2" pipe, and 4" of insulation
for pipe 2" and larger.
Hanger locking nut above the clevis must be tightened securely
to assure proper hanger performance. The nuts are not included.
Rated Loads are for up to 650°F (343°C).
Material: Carbon Steel.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Approvals: Federal Specification A-A-1192A Type 1,
MSS-SP-69 Type 1 and BSPSS-BS3974.
Ordering: Specify catalog number finish and pipe size.
CI-710 — Clevis Hanger for Ductile Iron
and A.W.W.A. Cast Iron Pipe
CI-710
CAT.
PIPE MAX. ROD TAKE WT.
NO.
SIZE LOAD A B C OUT E EACH
CI-710-4 4 1,430 3⁄453⁄481⁄843⁄82.08
CI-710-6 6 1,940 7⁄8710
3⁄851⁄22.78
CI-710-8 8 2,000 7⁄891⁄4133⁄473⁄44.47
CI-710-10 10 3,600 7⁄8101⁄4153⁄485⁄88.87
CI-710-12 12 3,800 7⁄8125⁄8191⁄411 12.0
CI-710-14 14 4,200 1 141⁄8213⁄4121⁄415.2
CI-710-16 16 4,800 1 147⁄8235⁄813 23.6
CI-710-18 18 4,800 11⁄4161⁄2261⁄4141⁄225.9
CI-710-20 20 4,800 11⁄4183⁄4291⁄2161⁄244.3
CI-710-24 24 4,800 11⁄4217⁄8343⁄4191⁄253.5
Standard Finish – GoldGalv
®
, unless otherwise stated.
CI-710
Designed to support non-insulated, stationary ductile iron and A.W.W.A.
cast iron lines from above allowing for approximately 1" to 11⁄2" of vertical
adjustment after the pipe is in place. The lower nut (not furnished) adjusts
the pipe line to the proper elevation. The top nut (not furnished) prevents
loosening due to vibration and must be tightened securely to assure proper
hanger performance.
Material: Carbon Steel.
Compliance: MSS-SP-69 Type 1, A-A-1192A Type 1.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify pipe size, catalog number and finish.
C
B
A
E
F
C
B
A
E
C
L
tnb07_gm102_F_52_53 1/18/08 9:37 AM Page F-53
Metal Framing, Pipe Hangers and Accessories
F-54
Pipe Straps, Conduit Clamps & Hangers
A
CAT.
PIPE ROD BOLT STOCK MAX. REC. STD.
NO.
SIZE SIZE B C D E F SIZE G SIZE LOADS LBS. CTN.
C-711-1/2 1⁄23⁄825⁄813⁄47⁄16 11⁄2115⁄16 1⁄435⁄32 12 ga x 3⁄4400 50
C-711-3/4 3⁄43⁄827⁄817⁄87⁄16 111⁄16 21⁄81⁄431⁄212 ga x 3⁄4400 50
C-711-1 13⁄8215⁄16 115⁄16 7⁄16 113⁄16 25⁄16 1⁄4311⁄16 12 ga x 3⁄4400 50
C-711-1-1/4 11⁄43⁄831⁄427⁄16 21⁄16 25⁄81⁄441⁄812 ga x 3⁄4400 50
C-711-1-1/2 11⁄23⁄839⁄16 23⁄16 7⁄16 27⁄16 27⁄81⁄445⁄812 ga x 3⁄4400 50
C-711-2 23⁄8311⁄16 21⁄87⁄16 29⁄16 31⁄16 1⁄45 12 ga x 3⁄4400 50
C-711-2-1/2 21⁄21⁄247⁄16 27⁄16 9⁄16 33⁄16 35⁄83⁄86 12 ga x 11⁄4500 25
C-711-3 31⁄2413⁄16 29⁄16 9⁄16 31⁄241⁄16 3⁄8621⁄32 12 ga x 11⁄4500 25
C-711-3-1/2 31⁄21⁄251⁄825⁄89⁄16 33⁄443⁄83⁄875⁄16 3⁄16 x 11⁄4500 25
C-711-4 45⁄861⁄833⁄16 9⁄16 45⁄853⁄16 3⁄889⁄16 3⁄16 x 11⁄4550 10
C-711-5 55⁄863⁄431⁄49⁄16 51⁄16 53⁄83⁄8923⁄32 3⁄16 x 11⁄4550 10
C-711-6 6* 3⁄473⁄439⁄16 9⁄16 513⁄16 65⁄83⁄8111⁄43⁄16 x 13⁄4600 10
C-711-8 8* 7⁄893⁄16 315⁄16 9⁄16 615⁄16 83⁄81311⁄16 3⁄16 x 13⁄4760 8
*Hangers 6" and over have hole instead of slot.
Pipe Hangers
C-711 — “J” Pipe Hanger
Standard Finish – GoldGalv
®
brand
Complies with Specification MSS SP 58, Type 5.
Sizes through 5" conform to Ca. Code Title 24,
Div. T22 for Seismic restraint bracing.
A
G
C
B
FED DIA.
Felt Lined
Standard
Plastic Coated
C-711F — Felt Lined “J” Pipe Hanger
Standard Finish – GoldGalv
®
brand
Available in sizes up to 8".
C-711P — Plastic Coated “J” Pipe Hanger
Standard Finish – GoldGalv
®
brand
Isolates hanger from glass and other piping for corrosion or cushioning
purposes. Available in sizes up to 4". Order by Cat. No. and pipe size.
Hole provided for side mounting to wall as bracket.
tnb07_gm102_F_54_55 1/17/08 5:22 PM Page F-54
Metal Framing, Pipe Hangers and Accessories
A-3
F-55
Pipe Straps, Conduit Clamps & Hangers
Pipe Hangers
(continued)
C-727, C-727F — Adjustable Swivel Ring
C-727, C-727F
CAT.
PIPE MAX. WT.
NO.
SIZE LOAD A B D E EACH
C-727-1/2 1⁄2300 3⁄823⁄431⁄16 17⁄16 0.09
C-727-3/4 3⁄4300 3⁄821⁄231⁄16 11⁄80.10
C-727-1 1 300 3⁄821⁄233⁄16 1 0.10
C-727-1-1/4 11⁄4300 3⁄8213⁄16 39⁄16 11⁄16 0.10
C-727-1-1/2 11⁄2300 3⁄831⁄837⁄811⁄16 0.11
C-727-2 2 300 3⁄835⁄16 43⁄811⁄80.12
C-727-2-1/2 21⁄2600 1⁄2311⁄16 51⁄811⁄40.32
C-727-3 3 600 1⁄245
7⁄811⁄80.35
C-727-3-1/2 31⁄2600 1⁄245⁄16 65⁄811⁄20.39
C-727-4 4 1,000 5⁄8415⁄16 71⁄811⁄40.43
C-727-5 5 1,000 5⁄855⁄881⁄213⁄80.65
C-727-6 6 1,250 3⁄4611⁄16 101⁄82 1.09
C-727-8 8 1,800 7⁄885⁄16 127⁄825⁄81.24
Standard Finish: Pre-Galv only.
C-727
E
A
B
D
Designed for the support of non-insulated static pipe lines. The swivel nut
is knurled to provide a gripping surface when adjusting the pipe elevation.
Compliance: Federal Specification A-A-1192A Type 10, MSS SP-69
Type 10, Underwriters Laboratory listed, and Factory Mutual
approved (3⁄4" through 8"). We also offer Swivel Ring hangers
that are for Copper Tubing (CT-727), PVC coated (C-727-P)
and for NFPA requirements (C-727-NFPA), in this catalog.
Material: Carbon Steel.
Finish: Standard Finish – Pre-Galv, Black (add suffix “-B”).
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify pipe size, catalog number and finish.
tnb07_gm102_F_54_55 1/17/08 5:22 PM Page F-55
Metal Framing, Pipe Hangers and Accessories
F-56
Pipe Straps, Conduit Clamps & Hangers
C-727-P — PVC Coated Adjustable
Swivel Ring
C-727-NFPA — NFPA Swivel Ring
Standard Finish – GoldGalv
®
, unless otherwise stated.
Standard Finish – GoldGalv
®
, unless otherwise stated.
C-727-P
PIPE MAX. WT.
CAT. NO.
SIZE LOAD A B D E EACH
C727P 1/2 1⁄2300 3⁄82 3⁄431⁄16 17⁄16 0.11
C-727-P-3/4 3⁄4300 3⁄821⁄231⁄16 11⁄80.13
C-727-P-1 1 300 3⁄821⁄233⁄16 1 0.13
C-727-P-1-1/4 11⁄4300 3⁄8213⁄16 39⁄16 11⁄16 0.15
C-727-P-1-1/2 11⁄2300 3⁄831⁄837⁄811⁄16 0.17
C-727-P-2 2 300 3⁄835⁄16 43⁄811⁄80.18
C-727-P-2-1/2 21⁄2600 1⁄2311⁄16 51⁄811⁄40.34
C-727-P-3 3 600 1⁄245
7⁄811⁄80.39
C-727-P-3-1/2 31⁄2600 1⁄245⁄16 65⁄811⁄20.42
C-727-P-4 4 1,000 5⁄8415⁄16 71⁄811⁄40.48
C-727-P-5 5 1,000 5⁄85 5⁄881⁄213⁄80.69
C-727-P-6 6 1,250 3⁄4611⁄16 101⁄82 1.13
C-727-P-8 8 1,800 7⁄885⁄16 127⁄825⁄81.29
C-727-P
Designed for the support of non-insulated static pipe lines and to protect the
pipe from coming into direct contact with the hanger by having the contact
surface PVC coated. The swivel nut is knurled to provide a gripping surface
when adjusting the pipe elevation.
Compliance: Federal Specification A-A-1192A Type 10, MSS SP-69
Type 10, Underwriters Laboratory listed, and Factory
Mutual approved (3⁄4" through 8").
We also offer Swivel Ring hangers that are for Copper
Tubing (CT-727) and for NFPA requirements
(C-727-NFPA) in this catalog.Operating temperature
should not exceed 140°F / 60°C.
Material: Carbon Steel.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify pipe size and catalog number.
C-727-NFPA
CAT. PIPE MAX. WT.
NO. SIZE LOAD A B D E EACH
C-727-NFPA-1/2 1⁄2300 3⁄823⁄431⁄16 17⁄16 0.09
C-727-NFPA-3/4 3⁄4300 3⁄821⁄231⁄16 11⁄80.10
C-727-NFPA-1 1 300 3⁄821⁄233⁄16 1 0.10
C-727-NFPA-1-1/4 11⁄4300 3⁄8213⁄16 39⁄16 11⁄16 0.10
C-727-NFPA-1-1/2 11⁄2300 3⁄831⁄837⁄811⁄16 0.11
C-727-NFPA-2 2 300 3⁄835⁄16 43⁄811⁄80.12
C-727-NFPA-2-1/2 21⁄2525 3⁄8311⁄16 51
1⁄40.25
C-727-NFPA-3 3 525 3⁄833⁄459⁄16 11⁄80.30
C-727-NFPA-3-1/2 31⁄2525 3⁄845⁄16 65⁄16 11⁄20.33
C-727-NFPA-4 4 650 3⁄841⁄271
5⁄80.41
C-727-NFPA-5 5 1,000 1⁄255⁄883⁄821⁄40.58
C-727-NFPA-6 6 1,000 1⁄261⁄2913⁄16 27⁄16 0.92
C-727-NFPA-8 8 1,000 1⁄2715⁄16 121⁄425⁄81.16
C-727-P
Designed for the support of non-insulated static pipe lines. The swivel nut
is knurled to provide a gripping surface when adjusting the tubing elevation
and is tapped to the reduced rod standards of NFPA.
Compliance: Federal Specification A-A-1192A Type 10, MSS SP-69
Type 10, Underwriters Laboratory listed, and Factory
Mutual approved (3⁄4" through 8") and NFPA standards.
We also offer Swivel Ring hangers that are for standard
commercial pipe (C-727), copper tubing (CT-727), and
PVC coated (C-727-P), in this catalog.
Material: Carbon Steel.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify pipe size, catalog number and finish.
Pipe Hangers
A
EB
D
A
EB
D
tnb07_gm102_F_56_57 1/17/08 5:09 PM Page F-56
Metal Framing, Pipe Hangers and Accessories
A-3
F-57
Pipe Straps, Conduit Clamps & Hangers
CT-727 — Copper Tubing Swivel Ring
Standard Finish – GoldGalv
®
unless otherwise stated.
CT-727
CAT. PIPE MAX. WT.
NO. SIZE LOAD A B D E EACH
CT727 1/2 1⁄2300 3⁄82 3⁄831⁄4111⁄16 0.11
CT-727-3/4 3⁄4300 3⁄82 3⁄831⁄813⁄80.11
CT-727-1 1 300 3⁄821⁄231⁄81 0.11
CT-727-1-1/4 11⁄4300 3⁄82 3⁄431⁄415⁄16 0.13
CT-727-1-1/2 11⁄2300 3⁄8215⁄16 35⁄811⁄80.13
CT-727-2 2 300 3⁄835⁄16 41⁄811⁄16 0.15
CT-727-2-1/2 21⁄2525 3⁄844
5⁄811⁄80.16
CT-727-3 3 525 1⁄249⁄16 59⁄16 15⁄16 0.32
CT-727-3-1/2 31⁄2525 1⁄249⁄16 57⁄811⁄80.35
CT-727-4 4 650 1⁄259⁄16 61⁄213⁄16 0.38
CT-727-5 5 1,000 1⁄261⁄483⁄815⁄80.58
CT-727-6 6 1,000 1⁄273⁄16 913⁄16 21⁄40.92
CT-727
Designed for the support of non-insulated static copper tubing lines. The swivel nut
is knurled to provide a gripping surface when adjusting the tubing elevation.
Compliance: Federal Specification A-A-1192A Type 10, MSS SP-69 Type 10. We also offer Swivel Ring
hangers that are for carbon steel pipe (C-727), PVC coated (C-727-P), and for NFPA requirements
(C-727-NFPA), in this catalog.
Material: Carbon Steel.
Finish: Copper.
Ordering: Specify copper tubing size.
Pipe Hangers
(continued)
A
EB
D
ET-727 Copper Sized Adjustable Ring
Standard Finish – GoldGalv®Barrier for separation of dissimilar metals.
Available in sizes 1⁄2" through 2". Sized for Copper Tubing.
TUBING ROD STOCK MAX REC. STD.
CAT. NO.
SIZE SIZE A B C SIZE LOAD LBS. CTN.
ET727 1/2 1⁄23⁄831⁄823⁄411⁄216 ga x 5⁄8400 100
ET-727-3/4 3⁄43⁄831⁄825⁄811⁄416 ga x 5⁄8400 100
ET-727-1 13⁄831⁄821⁄21 16 ga x 5⁄8400 100
ET-727-1-1/4 11⁄43⁄831⁄421⁄21 16 ga x 5⁄8400 100
ET-727-1-1/2 11⁄23⁄837⁄831
1⁄416 ga x 5⁄8400 100
ET-727-2 23⁄841⁄233⁄811⁄216 ga x 5⁄8400 100
ET-727-2-1/2 21⁄23⁄8*5
1⁄243⁄82 14 ga x 13⁄16 600 100
ET-727-3 31⁄263⁄843⁄42 14 ga x 13⁄16 600 100
ET-727-3-1/2 31⁄21⁄263⁄841⁄211⁄214 ga x 13⁄16 600 50
ET-727-4 41⁄2*7
3⁄851⁄42 14 ga x 11⁄41,250 100
ET-727-5 55⁄883⁄853⁄42 12 ga x 11⁄41,250 25
ET-727-6 65⁄891⁄263⁄811⁄812 ga x 11⁄41,250 25
2
1
⁄
2
" CT filled with water weighs less than 2" IP filled with water, 4" CT less than 3
1
⁄
2
" IP with water.
2
1
⁄
2
" CT available with
1
⁄
2
" thread and 4" CT available with
5
⁄
8
" thread for Government Specs.
Standard Finish – GoldGalv
®
, unless otherwise stated.
tnb07_gm102_F_56_57 1/17/08 5:09 PM Page F-57
Metal Framing, Pipe Hangers and Accessories
F-58
Pipe Straps, Conduit Clamps & Hangers
M-718, M-718-B — Extension Ring Hanger
Standard Finish – EG (silver)
PIPE ROD
CAT.
PIPE MAX. SIZE SIZE WT.
NO.
SIZE LOAD A A B EACH
M-718-3/8 3⁄8180 1⁄43⁄813⁄16 0.16
M-718-1/2 1⁄2180 1⁄43⁄87⁄80.17
M-718-3/4 3⁄4180 1⁄43⁄81 0.20
M-718-1 1 180 1⁄43⁄811⁄80.21
M-718-1-1/4 11⁄4180 1⁄43⁄817⁄16 0.29
M-718-1-1/2 11⁄2180 1⁄43⁄815⁄16 0.31
M-718-2 2 180 1⁄43⁄8111⁄16 0.35
M-718-2-1/2 21⁄2480 1⁄21⁄221⁄80.57
M-718-3 3 480 1⁄21⁄227⁄16 0.72
M-718-4 4 480 1⁄21⁄231⁄51.16
M-718
M-718 — (Rod Tapped – Electro-Galvanized)
M-718-B — (Rod Tapped – Plain Finish)
This split ring hanger is designed for the support of non-insulated stationary pipe lines. Also
available in a two-screw design. The MT-742-R Ceiling Plate is normally used with this product.
Material: Malleable Iron.
Finish: Standard Finish – EG (silver), Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Compliance: Federal Specification A-A-1192A Type 12, MSS-SP-69 Type 12.
Ordering: Specify pipe size and catalog number.
Pipe Hangers
A
B
MT-718 — Copper Extension Ring Hanger
Standard Finish – GoldGalv
®
, unless otherwise stated.
ROD
CAT.
TUBE MAX. SIZE WT.
NO.
SIZE LOAD A B EACH
MT718-1/4 1⁄4180 3⁄81⁄20.10
MT-718-3/8 3⁄8180 3⁄81⁄20.12
MT-718-1/2 1⁄2180 3⁄83⁄40.13
MT-718-5/8 5⁄8180 3⁄83⁄40.14
MT-718-3/4 3⁄4180 3⁄87⁄80.15
MT-718-1 1 180 3⁄81 0.16
MT-718-1-1/4 11⁄4180 3⁄811⁄40.19
MT-718-1-1/2 11⁄2180 3⁄811⁄40.22
MT-718-2 2 180 3⁄811⁄20.27
MT-718-2-1/2 21⁄2480 1⁄22 0.72
MT-718-3 3 480 1⁄221⁄41.07
MT-718
This split ring hanger is designed for the support of non-insulated copper tubing lines. The MT-718
is furnished tapped for bolt thread and is used with the MT-742-R Ceiling Plate. Also available in a
two-bolt design.
Material: Malleable Iron.
Finish: Copper. For Electro-Galvanizing please see M-718.
Compliance: Federal Specification A-A-1192A Type 12, MSS-SP-69 Type 12.
Ordering: Specify tube size and catalog number.
A
B
tnb07_gm102_F_58_59 1/18/08 4:26 PM Page F-58
Metal Framing, Pipe Hangers and Accessories
A-3
F-59
Pipe Straps, Conduit Clamps & Hangers
13⁄4"
Seismic Bracing
(Consult Superstrut®Seismic Hanger bulletin for additional information).
Standard Finish – GoldGalv
®
, unless otherwise stated.
41⁄2"
15⁄8"
1⁄4"
9⁄16" Dia.
(2 Holes)
15⁄8"
23⁄8"
11⁄16"
Dia.
41⁄2"
15⁄8"
1⁄4"
9⁄16" Dia.
(2 Holes)
C749N
Seismic Brace
1,500 lb. load safety factor 3
C749N 5/8
Seismic Brace
1,650 lb. load safety factor 3
15⁄8"
23⁄8"
9⁄16" Dia.
(2 Holes)
41⁄2"
1⁄4"
15⁄8"
2"
13⁄16"
Dia.
9⁄16" Dia.
(2 Holes)
1⁄4"
311⁄16"
15⁄8"
41⁄4"
All braces have plastisol coating on the flat member.
Plastisol insulates against vibration noise transmission
and eliminates rattle at the connection points.
CAT. PIPE ROD ADJUST- BOLT STOCK BOLT DESIGN STD.
NO. SIZE SIZE MENT CENTERS SIZE SIZE LOAD CTN
S720 3/4 3⁄43⁄815⁄841⁄23⁄16 x 11⁄41⁄2–11⁄4550 10
S-720-1 13⁄811⁄241⁄23⁄16 x 11⁄41⁄2–11⁄4550 10
S-720-1-1/4 11⁄43⁄81 3⁄853⁄16 x 11⁄41⁄2–11⁄4550 10
S-720-1-1/2 11⁄23⁄811⁄241⁄23⁄16 x 11⁄41⁄2–11⁄4550 10
S-720-2 23⁄811⁄251⁄4x 11⁄41⁄2–11⁄4700 10
S-720-2-1/2 21⁄21⁄221⁄853⁄81⁄4x 11⁄41⁄2–11⁄4700 10
S-720-3 31⁄221⁄461⁄41⁄4x 11⁄41⁄2–11⁄41,100 10
S-720-3-1/2 31⁄21⁄221⁄463⁄41⁄4x 11⁄41⁄2–11⁄41,100 10
S-720-4 41⁄221⁄471⁄41⁄4x 11⁄41⁄2–11⁄41,300 10
S-720-5 55⁄821⁄481⁄21⁄4x 11⁄25⁄8–11⁄21,600 10
S-720-6 65⁄821⁄491⁄21⁄4x 11⁄25⁄8–11⁄21,600 5
S-720-8 83⁄421⁄8111⁄21⁄4x 2 3⁄4–2 2,000 5
Pipe Hangers
(continued)
15⁄16"
Standard Finish-GoldGalv
®
brand. Approved for seismic applications.
C749N 7/8
Seismic Brace
1,650 lb. load safety factor 3
C-749-N-1-1/8
Seismic Brace
1,650 lb. load safety factor 3
ES-142
Size:
1
⁄
2
" x 1
1
⁄
4
" Bolt Size:
1
⁄
2
"
Seismic bracing rod stiffener connector
S-720 — Adjustable Pipe Hanger
15⁄8"
tnb07_gm102_F_58_59 1/18/08 4:26 PM Page F-59
Metal Framing, Pipe Hangers and Accessories
F-60
Pipe Straps, Conduit Clamps & Hangers
PG-794 — Pipe Alignment Guide
Standard Finish – GoldGalv
®
, unless otherwise stated.
Standard Finish – EG (silver).
Designed to maintain the axial alignment of piping as it expands and contracts during
operation. It is most typically installed adjacent to expansion joints and at reasonable
distances between the expansion joint and the anchor point. Our Figures 1007 and
1010 also offer alternative means for your piping alignment needs.
Note: Guides are not designed to carry dead weight loads. Maximum temperature is 750°F.
Material: Carbon Steel.
Finish: EG (Silver), Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify pipe size, insulation thickness, catalog number
and finish. Example Catalog Number: PG794 T3-2-1/2
would be 21⁄2" pipe with 2" thick insulation.
M-718
PG-794
WT.
SIZE A B C D E F G H EACH
16
3⁄441⁄253⁄831⁄851
1⁄235⁄85.8
27
1⁄455⁄863⁄831⁄263⁄411⁄235⁄87.2
38
3⁄865⁄873⁄846
3⁄411⁄235⁄88.2
410
3⁄885⁄893⁄857
3⁄811⁄235⁄810.6
512
1⁄3103⁄4115⁄861⁄473⁄824
5⁄815.6
614
7⁄8123⁄4135⁄871⁄4824
5⁄819.5
716
7⁄8143⁄4157⁄881⁄293⁄424
3⁄426.8
818
7⁄8163⁄4177⁄891⁄2101⁄446
3⁄435.6
922
5⁄819 20 101⁄2111⁄446
3⁄444.2
10 235⁄821 22 111⁄2141⁄846
7⁄852.6
11 255⁄823 24 121⁄2143⁄446
7⁄866.3
12 283⁄8253⁄4265⁄8133⁄4157⁄84 6 1 79.7
13 321⁄8291⁄2301⁄2153⁄4163⁄851⁄28 1 106.3
14 361⁄8331⁄2341⁄2173⁄4171⁄851⁄28 1 116.8
SIZE THICKNESS OF INSULATION
NUMBER 1 11⁄222
1⁄234
11
21
1⁄4–2 1
32
1⁄211⁄4–2 1
4 3–4 21⁄2–31⁄211⁄4–21⁄21–2 1
5 5–6 4–5 3–4 21⁄2–31⁄211⁄4–21⁄21
6 6 5–6 4–5 3–4 11⁄4–21⁄2
7 8 8 6 5–6 3–4
8 10 10 8 8 5–6
9121210108
10 14 12–14 12 10
11 16 16 14 12
12 16–18 14–16
13 20 18–20
14 24 24
PIPE SIZE DIM. I MAX. MVT
1" to 6" 4 4
8" to 16" 6 6
18" to 24" 8 8
PRODUCT INSULATION FOR PIPE
DESIGNATION THICKNESS SIZES
T1 1 1⁄2–24
T2 11⁄21⁄2–24
T3 2 1⁄2–24
T4 21⁄21⁄2–24
T5 3 1⁄2–24
T6 31⁄21⁄2–24
T7 4 1⁄2–24
Insulation Thickness Table
A
E
Insulation
Thickness
H Dia. 4 Holes
B
D
C
F
G
I
Pipe
tnb07_gm102_F_60_61 1/18/08 4:22 PM Page F-60
Metal Framing, Pipe Hangers and Accessories
A-3
F-61
Pipe Straps, Conduit Clamps & Hangers
Structure Attachments
CAT.
ROD MAX. WT.
NO.
SIZE SIZE LOAD EACH
C-736-SIDE CLIP-1 13⁄8750 6.99
C-736-SIDE CLIP-2 21⁄2750 10.10
C-736-Side Clip — Steel Bracket Clip
Clip can be used to support piping 31⁄2" or smaller from the horizontal
member of a C-736 Steel Bracket. The clip is composed of two steel
plates and one bolt and nut.
Material: Carbon Steel.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”)
Ordering: Specify size number, catalog number and finish.
MT-742-R
Rod Sizes: 3⁄8" & 1⁄2"
MT-742-R Ceiling Flange
Standard Finish – Copper-Colored Epoxy Paint.
M-742-R Ceiling Flange
Standard Finish – Black (B) or EG (Silver).
Standard Finish – GoldGalv
®
, unless otherwise stated.
M-742-R, M-742-RB, MT-742-R
CAT.
ROD MAX. WT.
NO.
TAP LOAD A B C EACH
M-742-R-3/8 3⁄8180 2 1⁄41⁄20.19
M-742-R-1/2 1⁄2180 2 1⁄41⁄20.18
A
B
C
Tap
M-742-R, M-742-RB, MT-742-R – Single Plate
M-742-R — (Rod Tapped – Electro-Galvanized)
M-742-RB — (Rod Tapped – Plain Finish)
MT-742-R — (Rod Tapped – Copper Finish)
Designed for attaching a rod to a wooden member. This part
is normally used in conjunction with ourM-718 Split Ring.
Material: Malleable Iron. M-742-R is Carbon Steel.
Ordering: Specify rod size and catalog number.
M-742-R
Rod Sizes:
3
⁄
8
" &
1
⁄
2
"
tnb07_gm102_F_60_61 1/18/08 4:22 PM Page F-61
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
F-62
C-739-H — Heavy Welded Steel Bracket
Designed to support pipe from either above or below. Slotted
construction allows for drop rod use along the length of the bracket.
This bracket is for bolted installation to walls and may require a
backing plate. Special steel brackets can be fabricated to customers
loads and/or dimensions.
Compliance: A-A-1192A Type 33, MSS-SP 69 Type 33.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify size number, catalog number and finish.
C-739-H
C-739-H
CAT.
MAX. WT.
NO.
SIZE LOAD A B C D E F G H J K L EACH
C-739-H-0 0 3,000 12 18 151⁄411⁄223⁄441⁄211⁄221⁄4NA 13⁄16 25.1
C-739-H-1 1 3,000 18 24 213⁄811⁄223⁄451
1⁄223⁄823⁄413⁄16 44.8
C-739-H-2 2 3,000 24 30 271⁄211⁄223⁄451
1⁄221⁄23⁄821⁄211⁄16 60.7
C-739-H-3 3 3,000 30 36 331⁄415⁄83622
1⁄23⁄821⁄211⁄16 98.1
C-739-H-4 4 3,000 36 42 39 11⁄23623
1⁄23⁄831⁄211⁄16 129.4
C-739-H-5 5 3,000 42 50 46 11⁄231⁄272
1⁄231⁄23⁄831⁄211⁄16 177.2
B C
1"
G
H
L
F
K
LL
L
A
D
One Bolt
Hole in
Size 0
Bracket
E
J
1⁄2"
C-736 — Light Welded Steel Bracket
Standard Finish – GoldGalv
®
, unless otherwise stated. C-736
C-736
CAT.
ROD MAX. WT.
NO.
TAP LOAD A B C EACH
C-736-1 1 750 9 8 6 1⁄26.99
C-736-2 2 750 13 12 10 1⁄210.10
C-736-3 3 750 19 18 16 1⁄210.50
Designed to support up to 6" pipe. This bracket is for installation to walls
as shown or inverted, and may require a backing plate. Holes for up to
3⁄4" rods are located at each end of the bracket to allow for use in either
orientation. The C-736 Side Clip Steel Bracket Clip can be attached to
the C-736 to support piping 31⁄2" or smaller. Please see the Figure 79
for more information.
Compliance: A-A-1192A Type 31, MSS-SP 69 Type 31.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify size number, catalog number and finish.
A
B1" 11⁄4"
2"
D
13⁄16" TYP (3) PLCS.
C
A
1"
1"
Structure Attachments
tnb07_gm102_F_62_63 1/17/08 5:24 PM Page F-62
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
A-3
F-63
Standard Finish – GoldGalv
®
, unless otherwise stated.
C-739-M-Medium Welded Steel Bracket
Designed to support pipe from either above or below. Slotted
construction allows for drop rod use along the length of the bracket.
This bracket is for bolted installation to walls and may require a
backing plate. Special steel brackets can be fabricated to customer’s
loads and/or dimensions.
Compliance: A-A-1192A Type 32, MSS-SP 69 Type 32.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify size number, catalog number and finish.
C-739-M
CAT.
MAX. WT.
NO.
SIZE LOAD A B C D E G L EACH
C-739-M-0 0 1,500 12 18 151⁄211⁄421⁄211⁄413⁄16 15.50
C-739-M-1 1 1,500 18 24 211⁄211⁄421⁄211⁄213⁄16 24.70
C-739-M-2 2 1,500 24 30 271⁄211⁄421⁄211⁄213⁄16 37.70
Structure Attachments
(continued)
C-739-M
L
G
L
1"
BC
D
E
A
7⁄8"
7⁄16" Dia.
11⁄2"
PG-795 — Pipe Block
Standard Finish — Black (B).
tnb07_gm102_F_62_63 1/17/08 5:24 PM Page F-63
Metal Framing, Pipe Hangers and Accessories
F-64
Pipe Attachments
H-115, H-115SS — Standard U-Bolt
Our standard U-Bolts are recommended for use as supports or guides for piping. They are supplied
with four hex nuts. The H-115SS is recommended for support of stainless steel piping. Please specify
the grade of stainless steel you require when ordering. Load Ratings shown are for Carbon Steel.
PVC coating should not exceed 140°F / 60°C.
Materials: Carbon Steel, Stainless Steel.
Compliance: Federal Specification A-A-1192A Type 24, MSS-SP 69 Type 24, and BSPSS-BS3974.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”), Electro-Galvanized
(add suffix “-EG”).
Side loads are given for the H-115 for a maximum temperature of 650°F / 343°C.
When the loading condition requires the simultaneous application of a normal load
and side load, the following interaction equation must be used to determine if the
H-115 can be used.
(Actual Load / Maximum Design Load) + (Actual Side Load / Maximum Side Load).
The result of this equation cannot exceed the value of 1.0 if the H-115 is to be used.
Ordering: Specify pipe size, catalog number and finish.
H-115
MAX. LOAD MAX. SIDE LOAD
CAT.
PIPE 650°F/ 750°F/ 650°F/ WT.
NO.
SIZE 343°C 399°C 343°C A B C D E EACH
H-115-1/2 1⁄2485 435 63 1⁄413⁄811⁄823⁄421⁄80.11
H-115-3/4 3⁄4485 435 63 1⁄411⁄813⁄823⁄421⁄80.12
H-115-1 1 485 435 63 1⁄413⁄815⁄823⁄421⁄80.12
H-115-1/2 1⁄21,200 1,070 316 3⁄813⁄811⁄423⁄421⁄80.16
H-115-3/4 3⁄41,200 1,070 240 3⁄811⁄811⁄223⁄421⁄80.16
H-115-1 1 1,200 1,070 186 3⁄813⁄813⁄423⁄421⁄80.19
H-115-1-1/4 11⁄41,220 1,090 194 3⁄813⁄421⁄827⁄821⁄80.28
H-115-1-1/2 11⁄21,220 1,090 194 3⁄822
3⁄832
1⁄20.30
H-115-2 2 1,220 1,090 194 3⁄821⁄227⁄831⁄421⁄20.33
H-115-2-1/2 21⁄22,260 2,020 184 1⁄233
1⁄233⁄43 0.70
H-115-3 3 2,260 2,020 184 1⁄235⁄841⁄84 3 0.78
H-115-3-1/2 31⁄22,260 2,020 184 1⁄241⁄845⁄841⁄23 0.84
H-115-4 4 2,260 2,020 184 1⁄245⁄851⁄841⁄23 0.90
ABE
D
Pipe Straps, Conduit Clamps & Hangers
CAT.
PIPE MAX. WT.
NO.
SIZE LOAD A B C D E EACH
HL-115-1/2 1⁄2485 1⁄411
1⁄421
3⁄40.06
HL-115-3/4 3⁄4485 1⁄411⁄813⁄821⁄813⁄40.07
HL-115-1 1 485 1⁄413⁄815⁄821⁄413⁄40.07
HL-115-1-1/4 11⁄4485 1⁄413⁄422
3⁄813⁄40.08
HL-115-1-1/2 11⁄2485 1⁄422
1⁄421⁄213⁄40.09
HL-115-2 2 485 1⁄421⁄223⁄423⁄413⁄40.10
HL-115-2-1/2 21⁄21,220 3⁄833
3⁄831⁄82 0.28
HL-115-3 3 1,220 3⁄835⁄843
3⁄82 0.31
HL-115-3-1/2 31⁄21,220 3⁄841⁄841⁄235⁄82 0.35
HL-115-4 4 1,220 3⁄845⁄853
7⁄82 0.38
HL-115-5 5 1,220 3⁄855⁄864
5⁄821⁄40.45
HL-115-6 6 2,260 1⁄263⁄471⁄451⁄821⁄40.95
HL-115-8 8 2,260 1⁄283⁄491⁄461⁄821⁄41.20
HL-115-10 10 3,620 5⁄8107⁄8111⁄271⁄421⁄22.30
HL-115
HL-115 — Light-Duty U-Bolt
Recommended for the guiding, anchoring and
supporting of conduit or light piping loads.
Furnished with two (2) hex nuts.
Compliance: Federal Specification A-A-1192A
(Type 24), MSS-SP 69 (Type 24),
and BSPSS-BS3974.
Material: Carbon Steel.
Finish: Standard Finish – GoldGalv®,
Black (add suffix “-B”),
Electro-Galvanized
(add suffix “-EG”).
Ordering: Specify pipe size, catalog
number and finish.
A
B
C
D
E
tnb07_gm102_F_64_65 1/17/08 5:19 PM Page F-64
Metal Framing, Pipe Hangers and Accessories
A-3
F-65
Beam Attachments
Pipe Straps, Conduit Clamps & Hangers
M-750 — Side Beam Bracket
MAX. LOAD
CAT. ROD WITH WITH BOLT WT.
NO. SIZE LAG SCREW TO STEEL C D F G EACH
M-750-3/8 3⁄8390 610 5⁄817⁄16 7⁄16 7⁄80.26
M-750-1/2 1⁄2640 1,130 3⁄417⁄89⁄16 13⁄16 0.54
M-750-5/8 5⁄8760 1,810 7⁄821⁄83⁄417⁄16 0.94
Designed for bolted connections.
Compliance: A-A-1192A Type 34 and MSS-SP 69 Type 34.
Material: Malleable Iron (Maximum Temperature 450°F / 232°C).
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify rod size and catalog number.
CAT.
MAX. WT.
NO.
SIZE LOAD A B C EACH
M-762-3/8 3⁄8rod 250 23⁄83⁄43⁄40.13
M-762-1/2 1⁄2rod 480 23⁄43⁄43⁄40.25
M-762-1/4 1⁄4pipe 250 23⁄43⁄43⁄40.25
M-762
M-762 — Side Beam Connector
Designed for use on buildings of wood construction. They can be
secured to the side of beams or joists by means of our Figure 166
Drive Screws (ordered separately).
Material: Malleable Iron.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify size, catalog number, and finish.
A
B
C
G
C
D
F
F
M-750
ROD
SIZE HOLE STOCK DESIGN STD.
CAT. NO.
A SIZE B C D E F SIZE LOAD CTN.
C747-3/8 B 3⁄8B7⁄16 23⁄437⁄847⁄87⁄16 21⁄81⁄4x 11⁄4610 50
C-747-1/2B 1⁄2B9⁄16 31⁄843⁄469⁄16 25⁄16 3⁄8x 11⁄21130 50
C-747-5/8B 5⁄8B11⁄16 31⁄843⁄469⁄16 23⁄16 3⁄8x 11⁄21810 50
C-747-3/4B 3⁄4B13⁄16 311⁄16 61⁄473⁄411⁄16 29⁄16 1⁄2x 2 2710 50
C-747-7/8B 7⁄8B15⁄16 33⁄463⁄881⁄413⁄16 21⁄21⁄2x 2 3770 50
Standard Finish – GoldGalv
®
, unless otherwise stated.
Standard Finish — Black (B).
Order by Cat. No., rod size.
A
F
E
B
C
D
C-747 — Adjustable Beam Attachment
For attachment to timber with coach screws or to
the bottom of beams with bolts.
tnb07_gm102_F_64_65 1/17/08 5:19 PM Page F-65
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
F-66
Rods and Rod Attachments
Standard Finish – GoldGalv
®
, unless otherwise stated.
Standard Finish – GoldGalv
®
, unless otherwise stated.
F-112
MAX. LOAD
CAT.
ROD 650°F/ WT.
NO.
SIZE 343°C B EACH
F-112-3/8 3⁄8610 71⁄80.30
F-112-1/2 1⁄21,130 71⁄20.60
F-112-5/8 5⁄81,810 77⁄81.00
F-112-3/4 3⁄42,710 81⁄41.20
F-112-7/8 7⁄83,370 85⁄81.90
F-112-1 1 4,960 9 2.50
F-112-1-1/4 11⁄48,000 91⁄83.80
F-112-1-1/2 11⁄211,630 93⁄45.70
F-112-1-3/4 13⁄415,700 103⁄88.20
F-112-2 2 20,700 11 14.20
F-112-2-1/4 21⁄427,200 127⁄827.00
F-112-2-1/2 21⁄233,500 131⁄233.00
F-112
F-112 — Turnbuckle
Used to connect right and left hand threaded rods together
and provide for adjustment.
Material: Forged Steel.
Compliance: Federal Specification A-A-1192A Type 13, MSS-SP 69
Type 13, and BSPSS-BS3974.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify catalog number, finish and rod size.
M-129
CAT.
ROD MAX. WT.
NO.
SIZE LOAD B C G H EACH
M-129-3/8 3⁄8610 11⁄421⁄81⁄21⁄20.20
M-129-1/2 1⁄21,130 13⁄823⁄85⁄81⁄20.40
M-129-5/8 5⁄81,810 11⁄221⁄25⁄81⁄20.44
M-129-3/4 3⁄42,710 13⁄427⁄85⁄81⁄20.65
M-129-7/8 7⁄82,950 17⁄833⁄49⁄16 0.78
M-129
M-129 — Extension Piece
Designed for attaching rods to the M-732-EXT Clamp
and similar types of attachments.
Material: Malleable Iron.
Compliance: Federal Specification A-A-1192A Type 30, MSS-SP-69
Type 30 when used with a Figure 82.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify rod size, catalog number and finish.
C
B
H
A
A
B6" 3" Rod
Take Out
tnb07_gm102_F_66_67 1/17/08 5:21 PM Page F-66
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
A-3
F-67
Recommended for attachment to the bottom of beams when little or
no pipe movement is expected. C-780 W/HWB is recommended for
attachment to the bottom of beams, when pipe movement is expected.
A bolt & nut or pin is supplied. A pin with cotters is normally supplied
for rod sizes over 1".
Compliance: 3Federal Specification A-A-1192A Type 22, MSS SP-69 Type
22 and BSPSS-BS3974.
Material: Carbon Steel.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify catalog number, rod size and finish.
C-780
C-780 W/OB, C-780 W/HWB
MAX. LOAD ROD TAKEOUT ROD TAKEOUT WT. EACH
CAT.
ROD 650°F/ BOLT OR C-780 W/OB C-780 W/HWB C-780 W/OB C-780 W/HWB
NO.
SIZE 343°C PIN SIZE C E E1 H R S W/O B&N W B&N
C-780-3/8 3⁄8610 1⁄227⁄817⁄829⁄16 7⁄811⁄40.96 1.20
C-780-1/2 1⁄21,130 5⁄827⁄813⁄4211⁄16 7⁄811⁄40.96 1.20
C-780-5/8 5⁄81,810 3⁄427⁄813⁄4213⁄16 7⁄811⁄40.96 1.60
C-780-3/4 3⁄42,710 7⁄831⁄811⁄821
15⁄16 11⁄821⁄81.90 2.80
C-780-7/8 7⁄83,770 1 41⁄425⁄831
1⁄811⁄421⁄82.50 3.90
C-780-1 1 4,960 11⁄841⁄233
1⁄211⁄411⁄227⁄84.30 6.30
C-780-1-1/4 11⁄48,000 13⁄85231
1⁄22 3 8.10 10.20
C-780-1-1/2 11⁄211,600 15⁄851⁄221⁄241
3⁄421⁄23 15.60 19.00
C-780-1-3/4 13⁄415,700 17⁄873⁄423⁄452 2
3⁄433⁄418.70 24.20
C-780-2 2 20,700 21⁄481⁄4N/A 5 23⁄831⁄433⁄4— 30.60
C-780-2-1/4 21⁄427,200 21⁄293⁄4N/A 61⁄425⁄831⁄233⁄4— 36.80
C-780-2-1/2 21⁄233,500 21⁄293⁄4N/A 61⁄427⁄833⁄433⁄4— 39.70
C-780-2-3/4 23⁄441,580 3 93⁄4N/A 53⁄431⁄843
3⁄4— 39.70
C-780-3 3 50,580 31⁄4101⁄4N/A 61⁄433⁄843
3⁄4— 49.00
C-780-3-1/4 31⁄471,280 31⁄2111⁄2N/A 7 35⁄841⁄241⁄4— 67.60
C-780-3-1/2 31⁄271,280 33⁄412 N/A 71⁄237⁄841⁄241⁄4— 79.30
Structure Attachments
E
S
C
E1
R
S
C
H
Rod Size A
C-780 W/OB, C-780 W/HWB — Welded Beam Attachment
tnb07_gm102_F_66_67 1/17/08 5:21 PM Page F-67
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
F-68
Beam Clamps
C-755
CAT.
CLAMP MAX. BOLT
NO.
SIZE LOAD B C D SIZE
C-755-1 1 500 7⁄81⁄211⁄23⁄8
C-755-2 2 700 11⁄85⁄813⁄41⁄2
C-755-3 3 800 11⁄45⁄821⁄2
C-755-4 4 1,000 13⁄83⁄423⁄85⁄8
C-755-5 5 3,000 15⁄87⁄825⁄83⁄4
C-755-6 6 3,000 2 1 3 7⁄8
C-755-7 36 5,000 21⁄811⁄841⁄81
C-755
C-755 — Beam Clamp
Designed to attach to the bottom of flanged beams. Normally used with the E-157
Eye Rod or E-120-A Eye Nut.
Material: Carbon Steel.
Compliance: Federal Specification A-A-1192A Type 21, MSS-SP-69 Type 21.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”), Electro-
Galvanized (add suffix “-EG”), Thermoplastic (add suffix “-TP”).
Ordering: Specify clamp size, flange width, flange thickness,
catalog number and finish.
A
B
C
D
C-769 — Top or Side Beam Clamp
The C-769 clamp is made in two parts. When bolted together, they prevent the
movement of the clamp from its position. The supporting rod is installed close
to the flange of the beam.
Material: Carbon Steel.
Compliance: Federal Spec. A-A-1192A Type 25, MSS-SP-69 Type 25.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”)
Ordering: Specify clamp number, width of flange, thickness of flange,
catalog number and finish.
C-769
WT. EACH
ROD WIDTH OF I BEAM FLANGE
CAT.
CLIP MAX. SIZE 4 6 8 12
NO.
NO. LOAD A B C 102 152 203 305
C-769-1 1 300 3⁄85⁄16 13⁄40.92 1.04 1.12 1.45
C-769-2 2 500 1⁄23⁄821⁄41.39 1.56 1.66 2.11
C-769-3 3 700 5⁄87⁄16 21⁄22.53 2.81 2.98 3.72
C-769-4 4 1,000 3⁄41⁄223⁄43.90 4.32 4.57 5.62
C-769-5 5 2,000 7⁄89⁄16 31⁄27.35 8.08 8.48 10.13
A
C
B
WEIGHT EACH
CAT.
CLAMP BEAM WIDTH — DIMENSION “A”
NO.
SIZE 2 3 4 5 6 7 8 10
C-755-1 1 .52 .62 .78 .88 .95 — — —
C-755-2 2 .74 .82 1.09 1.21 1.31 1.39 — —
C-755-3 3 1.26 1.49 1.89 2.12 2.29 2.45 2.69 —
C-755-4 4 — 2.32 2.85 3.18 3.39 3.60 3.92 —
C-755-5 5 — 3.40 4.08 4.52 4.80 5.10 5.51 6.23
C-755-6 6 — — 6.00 6.45 7.00 7.40 7.90 8.80
C-755-7 7 — — — 11.95 12.75 13.55 14.35 15.95
tnb07_gm102_F_68_69 1/18/08 4:26 PM Page F-68
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
A-3
F-69
Beam Clamps
(continued)
M-732-H — Steel Beam Clamp
with Weldless Eyenut
The M-732-H beam clamp with eyenut is used when welding to the
structure is prohibited for supports where some movement is expected.
The clamping effect is produced by the “ice tong” action of the arms and
is locked in place by the through bolt located just under the beam flange.
Material: Carbon Steel with Forged Steel Eyenut.
Compliance: Federal Specification A-A-1192A Type 28,
MSS-SP-69 Type 28 and BSPSS-BS3974.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify catalog number, rod size,
clamp number and finish.
M-732-H
M-732-H
MAX. MAX.
CAT.
CLAMP MAX. ROD SIZE BEAM BODY FLANGE WT.
NO.
SIZE LOAD A WIDTH SIZE THICKNESS EACH
M-732-H-1 1 2,710 3⁄43–8 25⁄32 0.6 5.5
M-732-H-2 2 4,960 1 3–8 25⁄32 0.6 5.5
M-732-H-3 3 4,960 1 4–11 27⁄32 0.6 9.0
M-732-H-4 4 4,960 1 4–12 29⁄32 1.03 29.0
M-732-H-5 5 4,960 1 11–15 1⁄64 1.03 33.3
M-732-H-6 6 11,500 11⁄24–12 29⁄32 1.03 29.0
M-732-H-7 7 11,500 11⁄211–15 1⁄64 1.03 33.3
M-732-H-8 8 11,500 2 4–12 29⁄32 1.03 29.0
CAT.
CLAMP BODY
NO.
SIZE SIZE 3 4 5 6 7 8 9 10 11 12 13 14 15
M-732-H-1 125⁄32 53⁄16 51⁄854
13⁄16 43⁄8315⁄16 ———————
M-732-H-2 225⁄32 53⁄16 51⁄854
13⁄16 43⁄8315⁄16 ———————
M-732-H-3 327⁄32 —8
1⁄481⁄881⁄877⁄877⁄873⁄876
1⁄2—— — —
M-732-H-4 427⁄32 —8
5⁄885⁄881⁄283⁄881⁄877⁄875⁄876
7⁄8———
M-732-H-5 51⁄64 —————— — —9
1⁄291⁄487⁄883⁄877⁄8
M-732-H-6 63⁄8—8
5⁄885⁄881⁄283⁄881⁄877⁄875⁄876
7⁄8———
M-732-H-7 71⁄64 —————— — —9
7⁄891⁄291⁄887⁄881⁄8
M-732-H-8 83⁄8—11
5⁄8111⁄2111⁄2113⁄8111⁄8107⁄8107⁄8101⁄210 — — —
A
E
Beam
Flange
Width
tnb07_gm102_F_68_69 1/18/08 4:26 PM Page F-69
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
F-70
Beam Clamps
M-732-EXT — Adjustable Beam Clamp
Designed to attach to the bottom of flanged beams without requiring welding. Normally used
with the M-129 Extension Piece (not furnished) up to a maximum 7⁄8" (M20) rod diameter.
Loading is achieved through the clamp jaws while locking is accomplished by tightening the
through-bolt located directly below the flange. Maximum flange thickness is 0.60 inches.
Material: Malleable Iron.
Compliance: Federal Specification A-A-1192A Type 30, MSS-SP-69
Type 30 when used with a Figure 157.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify catalog number, and finish. Order M-129
separately if required.
M-732-EXT
M-732-EXT
ROD TAKE OUT
BEAM FLANGE WIDTH — B
CAT.
MAX. ROD MAX. 2C 3 4 5 6 7 WT.
NO.
SIZE LOAD 60 76 101 127 152 177 EA.
M-732-EXT-3/8 3⁄8610 31⁄237⁄16 35⁄16 215⁄16 29⁄16 17⁄81.91
M-732-EXT-1/2 1⁄21,130 31⁄237⁄16 35⁄16 215⁄16 29⁄16 17⁄82.11
M-732-EXT-5/8 5⁄81,365 31⁄237⁄16 35⁄16 215⁄16 29⁄16 17⁄82.15
M-732-EXT-3/4 3⁄41,365 31⁄237⁄16 35⁄16 215⁄16 29⁄16 17⁄82.36
M-732-EXT-7/8 7⁄81,365 31⁄237⁄16 35⁄16 215⁄16 29⁄16 17⁄82.49
A
tnb07_gm102_F_70_71 1/17/08 5:26 PM Page F-70
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
A-3
F-71
B
A
Rollers, Shields and Saddles
B
A
2-
1
⁄
2
"
C-728 — Pipe Roller
(Pair)
•Cast aluminum rollers,
steel brackets
•Designed for standard
saddles
•Order separately for each
pair of rollers: Two 1⁄2" x
5⁄16" hex head cap screws,
two 1⁄2" channel nuts
•Space to fit O.D. of pipe
and wrapping
•Adjustable for radius
up to 8"
A
CAT.
MAX OS DESIGN STD.
NO.
RADIUS B LOAD CTN.
33⁄863⁄42,350 5 pair (10 pieces)
C28 45⁄871⁄22,350 5 pair (10 pieces)
63⁄881⁄22,350 5 pair (10 pieces)
81⁄299⁄16 2,350 5 pair (10 pieces)
C728
CAT.
PIPE DESIGN STD.
NO.
SIZE A B LOAD CTN.
610
13⁄16 69⁄16 3,920 5 pair (10 pieces)
811
13⁄16 73⁄83,920 5 pair (10 pieces)
10 127⁄885⁄16 3,920 5 pair (10 pieces)
C-728-H 12 137⁄893⁄16 3,920 5 pair (10 pieces)
14 141⁄293⁄43,920 5 pair (10 pieces)
16 151⁄2105⁄83,920 5 pair (10 pieces)
18 161⁄2117⁄16 3,920 5 pair (10 pieces)
C728H — Pipe Roller Assembly (Pair)
Cast aluminum roller, steel brackets. Order separately for each pair of rollers:
Two 1⁄2" x 5⁄16" hex head cap screws
Two 1⁄2" channel nuts
Adjustable to fit O.D. pipe
6" through 18".
C728H
21⁄2"
CR-729 — Roller Support
CR-729
CR-729
CAT.
PIPE MAX. WT.
NO.
SIZE LOAD A C D E H EACH
CR-729-2 2 300 41⁄215⁄833⁄413⁄16 3⁄80.79
CR-729-2-1/2 21⁄2600 5 15⁄16 41⁄213⁄81⁄21.44
CR-729-3 3 600 57⁄821⁄441⁄217⁄16 1⁄21.62
CR-729-3-1/2 31⁄2600 7 25⁄841⁄215⁄81⁄21.64
CR-729-4 4 700 7 213⁄16 41⁄2111⁄16 1⁄21.82
CR-729-5 5 700 81⁄237⁄16 41⁄225⁄82.90
CR-729-6 6 1,000 10 41⁄16 41⁄223⁄83⁄44.66
CR-729-8 8 1,300 12 51⁄851⁄423⁄47⁄87.29
CR-729-10 10 1,700 14 61⁄451⁄233⁄87⁄810.23
CR-729-12 12 2,300 16 77⁄16 63
15⁄16 7⁄812.27
CR-729-14 14 3,075 17 83⁄474
3⁄41 21.39
CR-729-16 16 3,075 19 97⁄16 85
1⁄16 1 27.76
CR-729 C-789 C-789A C-789B C-789C C-789D C-789E
PIPE SIZE 1" COV. 11⁄2" COV. 2" COV. 21⁄2" COV. 3" COV. 4" COV.
OF ROLL 25 38 51 64 76 100
42
1⁄2–3 2–21⁄2————
53
1⁄2—————
6 4–5 3–31⁄22–21⁄2———
7 6 4–5 3–4 2–21⁄22–21⁄2—
8 8 6 5 3-31⁄23–31⁄2—
10 — 8 6 4–5 4–5 —
12 10 10 8 6 6–8 4–6
14 12 12 10 8 — —
16 14 14 12–14 10 8 8
A
H
E
C
D
Material: Steel Axle, Cast Iron Roll.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify pipe size, catalog number and finish.
Standard Finish – GoldGalv
®
, unless otherwise stated.
Used on steam or hot
water systems where pipe
is to be supported in
tunnels, trenches,
structural brackets and
frames. Adjustment is
made by raising and
lowering the top nut on
the legs and locked into
position by tightening the
lower nut.
tnb07_gm102_F_70_71 1/17/08 5:26 PM Page F-71
Metal Framing, Pipe Hangers and Accessories
F-72
Pipe Straps, Conduit Clamps & Hangers
Standard Finish – GoldGalv
®
, unless otherwise stated.
C-729
C-729 C-789 C-789A C-789B C-789C C-789D C-789E
PIPE SIZE 1" COV. 11⁄2" COV. 2" COV. 21⁄2" COV. 3" COV. 4" COV.
OF ROLL 25 38 51 64 76 100
21⁄23⁄4——— ——
3 1–11⁄2——— ——
4 2–21⁄21–11⁄2—— ——
5 3–31⁄22–21⁄23⁄4–11⁄2———
6 4 3–31⁄22–21⁄23⁄4–1 — —
7 5 4 3–31⁄211⁄4–11⁄22—
8 6 5 4 2–3 21⁄2—
10 8 6 5–6 31⁄2–5 3–4 —
12 10 8 8 6 5–6 —
14 12 10 — 8 5–6 —
16 14 12 10 10 8 8
18 — 14 14 12 12 10
20 — 16 16 14 14 12
24 — 20 20 18 18 16
Standard Finish – GoldGalv
®
, unless otherwise stated.
C-729 — Harvard Roll Hanger
Designed to support piping lines from above, allowing for vertical adjustment
and axial movement in the piping. The lower nut (not furnished) adjusts the
pipe line to the proper elevation. The top nut (not furnished) prevents
loosening due to vibration, and must be tightened securely to assure
proper hanger performance.
Material: Carbon Steel frame with a Cast Iron Roll. Do not
exceed 450°F / 232°C at the contact point to the roll.
Compliance: A-A-1192A Type 43 and MSS-SP-69 Type 43.
Finish: Black (add suffix “-B”),
Electro-Galvanized (add suffix “-HDG”).
For pipe with insulation and a pipe covering
protection saddle the C-729 will have to be oversized
to suit. Please see the table below showing the
correct sizing for insulated pipe.
Ordering: Specify pipe size, catalog number and finish.
C-729
ROD
CAT.
PIPE MAX. SIZE WT.
NO.
SIZE LOAD A B C D E EACH
C-729-2 2 150 1⁄241⁄423⁄415⁄825⁄81.60
C-729-2-1/2 21⁄2225 1⁄247⁄831⁄422
7⁄82.00
C-729-3 3 310 1⁄261⁄43 7⁄821⁄431⁄82.30
C-729-3-1/2 31⁄2390 1⁄267⁄841⁄225⁄831⁄22.50
C-729-4 4 475 5⁄871⁄24 7⁄827⁄835⁄84.00
C-729-5 5 685 5⁄883⁄863⁄831⁄241⁄25.30
C-729-6 6 780 3⁄49 7⁄875⁄84 5 7.00
C-729-7 7 780 3⁄4111⁄881⁄243⁄451⁄49.40
C-729-8 8 780 7⁄8125⁄891⁄251⁄861⁄812.30
C-729-10 10 965 7⁄815 111⁄461⁄471⁄419.30
C-729-12 12 965 7⁄8171⁄8131⁄271⁄283⁄823.10
C-729-14 14 1,200 1 183⁄8145⁄883⁄883⁄435.50
C-729-16 16 1,400 1 201⁄2171⁄491⁄293⁄446.50
C-729-18 18 1,400 1 231⁄819 101⁄2111⁄257.00
C-729-20 20 1,600 11⁄4241⁄221 115⁄8121⁄475.90
C-729-24 24 1,800 11⁄2297⁄8243⁄414 153⁄4119.30
Pipe Rolls
A
E
B
D
C
L
C
tnb07_gm102_F_72_73 1/18/08 4:24 PM Page F-72
Metal Framing, Pipe Hangers and Accessories
A-3
F-73
Pipe Straps, Conduit Clamps & Hangers
RC-729 — Adjustable Roll SupportCR-729A — Roller Chair
Designed for longitudinal movement of pipe where vertical adjustment
is not required. Although two bolts are supplied for installation, the chair
can be alternatively welded in position.
Material: Carbon Steel Chair and Axle with Cast Iron Pipe Roll.
Use a Figure 17 when a Cast Iron Chair is required. Do
not exceed 450°F / 232°C at the contact point to the roll.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
For pipe with insulation and a pipe covering protection
saddle the CR-729A will have to be oversized to suit.
Please see the Table for the RC-729A which shows the
correct sizing for insulated pipe.
Ordering: Specify pipe size, catalog number and finish.
CR-729A
CR-729A
BOLT
CAT.
PIPE MAX. SIZE WT.
NO.
SIZE LOAD A B C D G EACH
CR-729-2A 2 300 47⁄815⁄811⁄223⁄8x 11⁄21.10
CR-729-2-1/2A 21⁄2600 47⁄821
5⁄823⁄8x 11⁄21.40
CR-729-3A 3 600 6 21⁄413⁄423⁄8x 11⁄21.60
CR-729-3-1/2A 31⁄2600 61⁄225⁄821⁄823⁄8x 11⁄22.60
CR-729-4A 4 700 7 27⁄823⁄821⁄23⁄8x 11⁄22.90
CR-729-5A 5 700 75⁄831⁄221⁄231⁄2x 2 3.90
CR-729-6A 6 1,000 93⁄442
3⁄431⁄41⁄2x 2 6.00
CR-729-8A 8 1,300 117⁄851⁄834
1⁄25⁄8x 2 9.00
CR-729-10A 10 1,700 141⁄263⁄835⁄853⁄4x 21⁄213.80
CR-729-12A 12 2,300 161⁄471⁄241⁄863⁄4x 21⁄218.90
CR-729-14A 14 3,100 181⁄283⁄843⁄461⁄23⁄4x 21⁄228.10
CR-729-16A 16 3,900 20 93⁄853⁄810 7⁄8x 3 34.90
CR-729-18A 18 4,200 223⁄4101⁄269
1⁄43⁄4x 21⁄244.40
CR-729-20A 20 4,500 255⁄8115⁄861⁄2101⁄43⁄4x 21⁄256.30
CR-729-24 24 6,000 30 14 77⁄8121⁄47⁄8x 31⁄287.50
Material: Cast Iron Pipe Roll and Sockets, Carbon Steel Axle,
Continuous Thread Rods and Hex Nuts. Do not exceed
450°F / 232°C at the contact point to the roll.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
For pipe with insulation and a pipe covering protection
saddle the RC-729 will have to be oversized to suit.
Please see the table for the RC-729A which shows
the correct sizing for insulated pipe.
Ordering: Specify pipe size, catalog number and finish.
RC-729
CAT.
PIPE MAX. WT.
NO.
SIZE LOAD A B D H EACH
RC-729-1-1/4 11⁄4300 3⁄833⁄871⁄411⁄41.08
RC-729-1-1/2 11⁄2300 3⁄835⁄871⁄413⁄81.11
RC-729-2 2 300 3⁄841⁄871⁄415⁄81.65
RC-729-2-1/2 21⁄2600 1⁄251⁄28 2 2.72
RC-729-3 3 600 1⁄261⁄882
1⁄42.72
RC-729-3-1/2 31⁄2700 1⁄271⁄882
5⁄82.72
RC-729-4 4 700 5⁄871⁄881⁄227⁄83.91
RC-729-5 5 700 5⁄883⁄893
1⁄24.63
RC-729-6 6 1,000 3⁄495⁄89 4 7.07
RC-729-8 8 1,300 7⁄812 10 51⁄811.40
RC-729-10 10 1,700 7⁄8141⁄811 63⁄813.70
RC-729-12 12 2,300 7⁄8161⁄812 71⁄215.90
RC-729-14 14 3,075 1 173⁄412 83⁄828.70
RC-729-16 16 3,970 1 193⁄418 91⁄242.50
RC-729-18 18 4,200 1 217⁄818 101⁄246.60
RC-729-20 20 4,550 11⁄4241⁄418 115⁄866.20
RC-729-24 24 6,160 11⁄2285⁄824 14 102.50
RC-729-30 30 7,290 11⁄2351⁄224 171⁄2186.80
Pipe Rolls
Standard Finish – GoldGalv
®
, unless otherwise stated.
A
D
B
C
G
A
B
D
H
Standard Finish – GoldGalv
®
, unless otherwise stated.
RC-729
tnb07_gm102_F_72_73 1/18/08 4:24 PM Page F-73
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
F-74
RC-729A — Adjustable Roll Support
Standard Finish – GoldGalv
®
, unless otherwise stated.
Designed for longitudinal movement of pipe where vertical adjustment is
required. Although primarily used for support of the pipe, this component
may also be placed over the pipe to act as a guide.
Material: Cast Iron Pipe Roll and Sockets with a Carbon Steel
Axle. Do not exceed 450°F / 232°C at the contact
point to the roll.
Compliance: A-A-1192A Type 42, MSS SP-69 Type 41.
Finish: Black (add suffix “-B”).
Electro-Galvanized (add suffix “-HDG”).
For pipe with insulation and a pipe covering
protection saddle, the RC-729A will have to be
oversized to suit. Please see the table below which
shows the correct sizing for insulated pipe.
Ordering: Specify pipe size, catalog number and finish.
RC-729A
ROD
CAT.
PIPE MAX. SIZE WT.
NO.
SIZE LOAD A B D K EACH
RC-729A-1 1 600 3⁄8314
1⁄80.45
RC-729A-1-1/4 11⁄4600 3⁄833⁄811⁄441⁄20.48
RC-729A-1-1/2 11⁄2600 3⁄835⁄813⁄843⁄40.51
RC-729A-2 2 600 3⁄841⁄815⁄851⁄40.57
RC-729A-2-1/2 21⁄2600 1⁄251⁄22 7 1.48
RC-729A-3 3 700 1⁄261⁄821⁄475⁄81.48
RC-729A-4 4 700 5⁄871⁄827⁄885⁄81.78
RC-729A-5 5 700 5⁄883⁄831⁄297⁄82.42
RC-729A-6 6 1,000 3⁄495⁄8411
3⁄83.96
RC-729A-7 7 1,200 3⁄4103⁄443⁄4121⁄25.99
RC-729A-8 8 1,300 7⁄812 51⁄814 6.43
RC-729A-10 10 1,700 7⁄8141⁄861⁄416 8.45
RC-729A-12 12 2,400 7⁄8161⁄871⁄218 10.20
RC-729A-14 14 3,100 1 173⁄483⁄820 20.90
RC-729A-16 16 3,900 1 197⁄891⁄2221⁄826.07
RC-729A-18 18 4,200 1 221⁄8101⁄2243⁄836.59
RC-729A-20 20 4,500 11⁄4241⁄8115⁄8265⁄839.00
RC-729A-24 24 6,100 11⁄2287⁄814 321⁄866.90
RC-729A-30 30 7,200 11⁄2351⁄2171⁄2397⁄8134.00
RC-729A
PIPE SIZE OF COVERING PROTECTION SADDLE TO BE USED WITH RC-729A
RC-729A C-789 C-789A C-789B C-789C C-789D C-789E
PIPE SIZE 1" COV. 11⁄2" COV. 2" COV. 21⁄2" COV. 3" COV. 4" COV.
OF ROLL 25 38 51 64 76 100
21⁄23⁄4–1—————
31
1⁄4–11⁄23⁄4–1————
42
1⁄2–3 11⁄23⁄4–1 — — —
53
1⁄22–21⁄211⁄4–11⁄23⁄4–1 — —
6 4–5 3–31⁄22–21⁄211⁄4–11⁄2——
7 6 4–5 3–4 2–21⁄22–21⁄2—
8 — 6 5 3–31⁄23–31⁄2—
10 8 8 6 4–5 4–5 —
12 10 10 8 6 6–8 4–6
14 12 12 10 8 — —
16 14 14 12–14 10 10 8
18 16 16 16 12–14 12–14 10
20 18 18 — 16 — 12
24 20 20 18–20 18–20 16–20 14–18
30 24 24 24 24 24 20–24
Pipe Rolls
B
A
D
K
tnb07_gm102_F_74_75 1/17/08 5:26 PM Page F-74
Pipe Straps, Conduit Clamps & Hangers
Metal Framing, Pipe Hangers and Accessories
A-3
F-75
Pipe Rolls
S-730-C — Chair and Roll
Designed for longitudinal movement of pipe where vertical adjustment is not required.
Because the chair is made of steel, it can be either welded or bolted in position.
Material: Carbon Steel Chair and Axle with Cast Iron Pipe Roll.
Use a Figure 17 when a Cast Iron Chair is required. Do
not exceed 450°F / 232°C at the contact point to the roll.
Compliance: Federal Specification A-A-1192A Type 44, MSS-SP-69 Type 44.
Finish: Black (add suffix “-B”).
Electro-Galvanized (add suffix “-HDG”). For pipe with insulation
and a pipe covering protection saddle, the S-730-C will have
to be oversized to suit. Please see the Table below showing
the correct sizing for insulated pipe.
Ordering: Specify chair number, catalog number and finish.
BARE C-789 C-789A C-789B C-789C C-789D C-789E
CHAIR PIPE 1" COV. 11⁄2" COV. 2" COV. 21⁄2" COV. 3" COV. 4" COV.
NO. SIZE 25 38 51 64 76 102
125⁄32 2— — — — — —
—2
1⁄23⁄4–3 3⁄4–21⁄23⁄4–13⁄4———
— 3 20–80 20–65 20–40 — — —
—3
1⁄2— — ————
1 4 4–6 3–5 2–4 3⁄4–11⁄2——
— 5 100–150 80–125 50–100 20–40 — —
—6— — ————
2 8 8 6–8 5–8 2–5 2–6 4–5
— 10 200 150–200 125–200 50–125 50–150 100–125
3 12 10–12 10–12 10–12 6–8 8 6–8
— 14 250–300 250-300 250–300 150–200 200 150–200
4 16 14–18 14–18 14–18 10–16 10–14 10–12
— 18 350–450 350-450 350–450 250–400 250–350 250–300
—20 — — — — — —
5 24 20 20 18–20 18–20 16–18 14–18
5 600 500 500 450–500 450–500 400–450 350–450
6 30 24 24 24 24 20–24 20-24
6 750 600 600 600 600 500–600 500–600
73630 30 30303028
— 900 750 750 750 750 750 700
74240 36 36363632
— 1050 1000 900 900 900 900 800
S-730-C
CAT.
CHAIR MAX. BARE PIPE WT.
NO.
NO. LOAD SIZE C D E J K M N O P S EA.
S-730-C-1A 125⁄32 390 2 6 81⁄211⁄261⁄211⁄4247⁄64 31⁄241⁄87.0
21⁄213⁄4
32
1⁄8
31⁄223⁄8
S-730-C-1 1 950 4 6 101⁄823⁄481
1⁄423⁄847⁄64 43⁄443⁄410.5
53
3⁄8
63
7⁄8
S-730-C-2 2 2,100 8 7 9 51⁄841
3⁄833⁄411⁄16 7 5 16.5
10 61⁄4
S-730-C-3 3 3,075 12 8 11 73⁄853⁄413⁄843⁄411⁄16 9 6 26.8
14 8
S-730-C-4 4 4,980 16 9 121⁄287⁄863⁄411⁄243⁄413⁄16 10 61⁄240.5
18 10
20 11
S-730-C-5 5 6,100 24 87⁄8133⁄413 71⁄215⁄847⁄813⁄16 111⁄263⁄451.0
S-730-C-6 6 7,500 30 11 171⁄4161⁄410 1 5⁄855⁄813⁄16 143⁄48 89.8
S-730-C-7 7 12,000 36 12 20 20 12 1 1 57⁄811⁄16 17 9 145
42 231⁄8
S-730-C
CS
K
DD
J
J
PP
CS
K
O
O
EE
NN
Chair No. 1A & 1 Chair No. 2 thru 6
tnb07_gm102_F_74_75 1/17/08 5:27 PM Page F-75
Metal Framing, Pipe Hangers and Accessories
F-76
Pipe Straps, Conduit Clamps & Hangers
Pipe Rolls
S-730-D — Adjustable Chair and Roll
Designed for longitudinal movement of pipe where vertical and lateral
adjustment is required. Because the base plate is made of steel, it can be
either welded or bolted in position. The correct height can be obtained by
adjusting the screws at each corner. The correct lateral location can be
achieved by sliding the chair on the ends of the adjusting screws. The
S-730-D may be used without the Base Plate to rest on customer
provided flooring or structure.
Material: Carbon Steel Chair, Base, Axle and Adjusting Screws
with Cast Iron Pipe Roll. Use a Figure 53 when a Cast
Iron Chair and Base are required. Do not exceed 450°F /
232°C at the contact point to the roll.
Compliance: Federal Specification A-A-1192A Type 46,
MSS-SP-69 Type 46.
Finish: Black (add suffix “-B”).
Electro-Galvanized (add suffix “-HDG”).
For pipe with insulation and a pipe covering protection
saddle the S-730-D will have to be oversized to suit.
Please see the Table below showing the correct sizing
for insulated pipe.
Ordering: Specify chair number, catalog number and finish.
S-730-D
BARE
CAT.
CHAIR MAX. PIPE WT.
NO.
NO. LOAD SIZE B C D E MIN. MAX. EA.
S-730-D-1A
1A 390 2 67⁄851⁄237⁄813⁄433
7⁄815.5
—— —2
1⁄2——— 2
1⁄8——
—— 3———2
1⁄2———
—— 3
1⁄2—— — 2
1⁄2———
S-730-D-1
1 950 4 81⁄253⁄451⁄827⁄833⁄841⁄220.7
—— 5———3———
—— 6———3
7⁄8———
S-730-D-2
2 2,100 8 105⁄861⁄273⁄853⁄847⁄865⁄834.3
— — 10 — — — 6 — — —
S-730-D-3
3 3,075 12 121⁄273⁄491⁄271⁄857⁄875⁄850.6
— — 14 — — — 8 — — —
S-730-D-4
4 4,980 16 145⁄885⁄8111⁄891⁄457⁄873⁄473.6
— — 18 — — — 101⁄2———
— — 20 — — — 111⁄4———
S-730-D-5
5 6,100 24 153⁄485⁄8121⁄4133⁄861⁄88 88.7
S-730-D
-
6
6 7,500 30 191⁄4101⁄2153⁄4167⁄871⁄4101⁄2166
S-730-D
-
7
7 12,000 36 221⁄212 16 20 83⁄8113⁄4233
— 12,000 42 221⁄212 16 231⁄883⁄8113⁄4233
PIPE SIZE OF COVERING PROTECTION SADDLE TO BE USED WITH S-730-D
BARE C-789 C-789A C-789B C-789C C-789D C-789E
CHAIR PIPE 1" COV. 11⁄2" COV. 2" COV. 21⁄2" COV. 3" COV. 4" COV.
NO. SIZE 25 38 51 64 76 102
1A 2 — — — — — —
—2
1⁄23⁄4–3 3⁄4–21⁄23⁄4–11⁄2—— —
— 3 20–80 20–65 20–40
—3
1⁄2——————
1 4 4–6 3–5 2–4 3⁄4-11⁄2——
— 5 100–150 80–125 50–100 20-40 — —
—6 — — — —— —
2 8 8 6–8 5–8 2-5 2–6 4–5
— 10 200 150–200 125–200 50-125 50–150 100–125
3 12 10–12 10–12 10–12 6-8 8 6–8
— 14 250–300 250–300 250–300 150–200 200 150–200
4 16 14–18 14–18 14–18 10–16 10–14 10–12
— 18 350–450 350–450 350–450 250–400 250–350 250–300
—20 — — — — — —
5 24 20 20 18–20 18–20 16–18 14–18
5 600 500 500 450–500 450–500 400–450 350–450
6 30 24 24 24 24 20–24 20–24
6 750 600 600 600 600 500–600 500–600
73630 30 303030 28
— 900 750 750 750 750 750 700
74240 36 363636 32
1,050 1,000 900 900 900 900 800
Standard Finish – GoldGalv
®
, unless otherwise stated.
S-730-D
All Holes
in Base are
1" Diam.
E
N
D
B
Adjusting
Bolts
tnb07_gm102_F_76_77 1/17/08 5:23 PM Page F-76
Metal Framing, Pipe Hangers and Accessories
A-3
F-77
Pipe Straps, Conduit Clamps & Hangers
Pipe Attachments
Standard Finish – GoldGalv
®
, unless otherwise stated.
CR-786 — Adjustable Pipe Support
Used for support of piping from below without welding to the pipe, and consists of a
steel saddle, nipple and pipe reducer. It connects to a threaded pipe standard and base.
Rated loads are for up to 650°F (343°C).
Materials: Reducer is Cast Iron, Pipe saddle and nipple are carbon steel.
Compliance: Federal Specification A-A-1192A Type 39, MSS-SP-69 Type 39.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify pipe size, catalog number and finish.
C-786
C-786
CAT.
PIPE MAX. MIN. MAX. WT.
NO.
SIZE LOAD A B D E E EACH
C-786-1-1/2
11⁄25,000 21⁄211⁄411⁄28 13 4.75
C-786-2
2 5,000 21⁄211⁄211⁄28 13 4.80
C-786-2-1/2
21⁄25,000 21⁄217⁄811⁄28 13 4.90
C-786-3
3 5,000 21⁄221⁄811⁄281⁄4131⁄45.00
C-786-4
4 7,000 3 25⁄821⁄291⁄8141⁄89.30
C-786-5
5 7,000 3 31⁄421⁄295⁄8145⁄89.65
C-786-6
6 7,000 3 37⁄821⁄2101⁄4151⁄411.70
C-786-8
8 7,000 3 47⁄821⁄2111⁄4161⁄412.90
C-786-10
10 7,000 3 57⁄821⁄2123⁄8173⁄814.10
C-786-12
12 7,000 3 67⁄821⁄2133⁄8183⁄815.30
C-786-14
14 7,000 4 71⁄2315
1⁄2201⁄221.70
C-786-16
16 7,000 4 85⁄8316
5⁄8215⁄825.40
C-786-18
18 7,000 6 95⁄8419
1⁄8241⁄839.30
C-786-20
20 7,000 6 105⁄8420
1⁄8251⁄844.90
C-786-24
24 10,000 6 123⁄4422
1⁄4271⁄454.30
C-786-30
30 10,000 6 153⁄4425
1⁄4301⁄462.40
C-786-36
36 10,000 6 183⁄4428
1⁄4331⁄470.20
A
D
E
B
C
L
tnb07_gm102_F_76_77 1/17/08 5:24 PM Page F-77
Metal Framing, Pipe Hangers and Accessories
F-78
Pipe Straps, Conduit Clamps & Hangers
Pipe Saddles and Pipe Shields
C-789, C-789A, C789B, C-789C, C-789D,
C-789E — Pipe Covering Protection Saddle
The C-789 saddles are used to protect the insulation against damage
and keep heat loss to a minimum. They are designed for from 1" up to
5" of covering. All Saddles are 12" long with three tabs on each side for
welding to pipe. Sizes 12" and larger have a welded-in center rib.
Material: Carbon Steel (except C-789 and C-789-8
which are Chrome Molybdenum Steel).
Compliance: Federal Specification A-A-1192A Type 39A or 39B,
MSS-SP-69 Type 39A or 39B and BSPSS-BS3974.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify catalog number and pipe size.
C-789
C-789
MAX. ACTUAL FIGURE 1 FIGURE 2
CAT.
PIPE COVERING COVERING MAX. ROLL ROLL WT.
NO.
SIZE THICKNESS THICKNESS LOAD SIZE A B SIZE A B EACH
C-789-3/4
3⁄4115⁄16 1,200 21⁄221⁄815⁄82–31⁄225⁄16 15⁄81.15
C-789A-3/4
3⁄411⁄211⁄21,200 3 25⁄821⁄82–31⁄2211⁄16 21⁄42.10
C-789B-3/4
3⁄42 2 1,200 4 31⁄425⁄82–31⁄233⁄825⁄82.63
C-789-1
3⁄411
1⁄16 1,200 21⁄423⁄413⁄42–31⁄227⁄16 13⁄41.15
C-789A-1
3⁄411⁄219⁄16 1,200 3 27⁄823⁄82–31⁄2215⁄16 23⁄82.10
C-789B-1
12 2
1⁄81,200 4 33⁄823⁄42–31⁄231⁄223⁄42.63
C-789-1-1/4
11⁄417⁄81,200 3 21⁄22 2–31⁄229⁄16 2 1.25
C-789A-1-1/4
11⁄411⁄215⁄81,200 31⁄232
1⁄22–31⁄233⁄16 21⁄22.10
C-789B-1-1/4
11⁄421
15⁄16 1,200 5 35⁄831⁄16 2–31⁄2311⁄16 31⁄16 2.63
C-789C-1-1/4
11⁄421⁄221⁄21,200 6 41⁄431⁄24–6 41⁄16 31⁄23.25
C-789-1-1/2
11⁄211
1⁄16 1,200 3 21⁄22 2–31⁄2211⁄16 2 1.50
C-789A-1-1/2
11⁄211⁄219⁄16 1,200 4 31⁄825⁄82–31⁄235⁄16 25⁄82.10
C-789B-1-1/2
11⁄222
3⁄81,800 5 49⁄16 33⁄82–31⁄233⁄433⁄83.10
C-789C-1-1/2
11⁄221⁄227⁄81,800 6 45⁄837⁄84–6 43⁄16 37⁄83.75
C-789-2
21 1
1⁄16 1,200 31⁄227⁄823⁄82–31⁄2215⁄16 23⁄81.63
C-789A-2
21
1⁄219⁄16 1,200 4 39⁄16 25⁄82–31⁄235⁄16 25⁄82.10
C-789B-2
22 2
1⁄81,800 6 41⁄431⁄24–6 37⁄831⁄23.12
C-789C-2
22
1⁄225⁄81,800 7 43⁄44 4–6 413⁄16 4 3.63
C-789D-2
23 3
1⁄16 1,800 7 51⁄441⁄27–10 55⁄16 41⁄24.40
C-789-2-1/2
21⁄211
1⁄16 1,200 4 31⁄227⁄82–31⁄239⁄16 27⁄81.75
C-789A-2-1/2
21⁄211⁄217⁄81,200 6 41⁄233⁄82–31⁄233⁄433⁄82.40
C-789B-2-1/2
21⁄222
3⁄81,800 6 45⁄837⁄84–6 43⁄16 37⁄83.12
C-789C-2-1/2
21⁄221⁄227⁄81,800 7 59⁄16 43⁄87–10 51⁄16 43⁄83.63
C-789D-2-1/2
21⁄233
3⁄81,800 7 55⁄847⁄87–10 59⁄16 47⁄84.40
Standard Finish – GoldGalv
®
, unless otherwise stated.
12"
A
B
A
B
Figure 2Figure 1
Covering
Thickness
Center Rib
Sizes 12"
& Larger
tnb07_gm102_F_78_79 1/17/08 5:24 PM Page F-78
Metal Framing, Pipe Hangers and Accessories
A-3
F-79
Pipe Straps, Conduit Clamps & Hangers
Pipe Saddles and Pipe Shields
C-789
(continued)
MAX. ACTUAL
CAT.
PIPE COVERING COVERING MAX. FIGURE 1 FIGURE 2 WT.
NO.
SIZE THICKNESS THICKNESS LOAD ROLL SIZE A B ROLL SIZE A B EACH
C-789-3
311
1⁄16 1,200 4 31⁄227⁄82–31⁄239⁄16 27⁄81.75
C-789A-3
31
1⁄219⁄16 1,800 6 41⁄233⁄44–6 41⁄16 33⁄42.75
C-789B-3
322
1⁄16 1,800 7 43⁄44 4–6 49⁄16 4 3.50
C-789C-3
32
1⁄229⁄16 1,800 8 53⁄845⁄87–10 53⁄845⁄83.93
C-789D-3
333
1⁄16 1,800 8 57⁄85 7–10 6 5 4.40
C-789-4
411
1⁄16 5,000 6 41⁄431⁄24–6 4 31⁄22.13
C-789A-4
41
1⁄219⁄16 5,000 7 43⁄44 4–6 41⁄16 4 3.00
C-789B-4
422
1⁄16 5,000 7 53⁄845⁄84–6 51⁄845⁄83.50
C-789C-4
42
1⁄229⁄16 5,000 10 6 51⁄87–10 57⁄851⁄83.93
C-789D-4
433
1⁄85,000 10 65⁄853⁄47–10 63⁄853⁄45.00
C-789E-4
444
1⁄85,000 12 73⁄461⁄27–10 79⁄16 61⁄26.30
C-789-4
444
1⁄16 5,000 12 73⁄461⁄27–10 75⁄861⁄214.45
C-789-4
45
1⁄2511⁄16 5,000 16 95⁄881⁄416 91⁄281⁄426.40
C-789-5
511
1⁄16 1,800 6 47⁄841⁄84-6 4 41⁄82.38
C-789A-5
51
1⁄219⁄16 1,800 7 51⁄243⁄44–6 53⁄16 43⁄43.00
C-789B-5
522
1⁄16 1,800 8 6 51⁄47–10 6 51⁄43.62
C-789C-5
52
1⁄229⁄16 1,800 10 65⁄853⁄47–10 67⁄16 53⁄44.06
C-789D-5
533
1⁄16 1,800 10 71⁄861⁄47–10 75⁄32 61⁄45.00
C-789E-5
544
1⁄41,800 12 81⁄47 7–10 83⁄32 7 6.30
C-789-5
544
3⁄16 5,000 12 83⁄871⁄87–10 81⁄471⁄814.95
C-789-5
55
1⁄2511⁄16 5,000 18 103⁄16 83⁄418 103⁄483⁄427.40
C-789-6
6 1 1 1,800 7 53⁄845⁄84–6 51⁄845⁄83.85
C-789A-6
61
1⁄211⁄21,800 8 57⁄85 7–10 63⁄16 5 4.75
C-789B-6
622
1⁄16 1,800 10 63⁄851⁄27–10 61⁄251⁄26.28
C-789C-6
62
1⁄229⁄16 1,800 12 7 6 12–15 75⁄86 7.09
C-789D-6
633
1⁄16 1,800 12 73⁄461⁄27–10 71⁄261⁄28.10
C-789E-6
644
3⁄16 1,800 12 87⁄875⁄812–15 813⁄16 75⁄810.15
C-789-6
644
1⁄87,200 12 87⁄877⁄812–15 87⁄877⁄816.00
C-789-6
65
1⁄255⁄87,200 18 119⁄16 10 18 111⁄210 27.50
C-789-8
811
1⁄16 1,800 10 7 6 7–10 69⁄16 6 5.05
C-789A-8
81
1⁄219⁄16 1,800 10 7 6 7–10 73⁄16 6 5.25
C-789B-8
822
1⁄16 1,800 12 71⁄261⁄27–10 711⁄16 61⁄27.00
C-789C-8
82
1⁄2211⁄16 1,800 14 81⁄47 12–15 811⁄16 7 7.55
C-789D-8
833
3⁄16 1,800 12 87⁄875⁄812–15 827⁄32 75⁄89.90
C-789E-8
844
3⁄16 1,800 16 10 83⁄412–15 913⁄16 83⁄410.13
C-789-8
844
3⁄16 7,200 16 10 83⁄412–15 97⁄883⁄416.90
C-789-8
85
1⁄259⁄16 7,200 20 1113⁄16 101⁄420 113⁄4101⁄434.10
C-789-10
10 1 1 1,800 10 81⁄471⁄47–10 69⁄16 71⁄45.05
C-789A-10
10 11⁄215⁄81,800 10 81⁄471⁄47–10 73⁄16 71⁄45.25
C-789B-10
10 2 21⁄16 1,800 12 91⁄877⁄87–10 711⁄16 77⁄87.0
C-789C-10
10 21⁄221⁄81,800 16 95⁄881⁄816–20 911⁄16 81⁄88.75
C-789D-10
10 3 31⁄85,000 16 101⁄887⁄816–20 103⁄887⁄810.70
C-789E-10
10 4 41⁄85,000 18 111⁄893⁄416–20 111⁄16 93⁄413.88
C-789-10
10 4 41⁄16 7,200 18 111⁄893⁄416–20 111⁄893⁄417.50
C-789-10
10 51⁄259⁄16 7,200 20 131⁄8111⁄420 125⁄8111⁄436.60
C-789-12
12 1 11⁄82,500 14 93⁄881⁄812–15 91⁄481⁄87.30
C-789A-12
12 11⁄215⁄85,000 14 93⁄881⁄812–15 97⁄881⁄87.35
C-789B-12
12 2 21⁄85,000 16 10 85⁄816–20 9n 85⁄89.20
C-789C-12
12 21⁄221⁄85,000 18 101⁄291⁄816–20 109⁄16 91⁄810.04
C-789D-12
12 3 31⁄85,000 18 111⁄493⁄416–20 111⁄893⁄411.00
C-789E-12
12 4 41⁄85,000 20 121⁄4103⁄416–20 121⁄16 103⁄414.45
C-789-12
12 4 41⁄811,000 20 121⁄4103⁄416–20 121⁄8103⁄428.00
C-789-12
12 51⁄259⁄16 11,000 24 141⁄4123⁄824 133⁄4123⁄836.60
tnb07_gm102_F_78_79 1/17/08 5:25 PM Page F-79
Metal Framing, Pipe Hangers and Accessories
F-80
Pipe Straps, Conduit Clamps & Hangers
C-789
(continued)
MAX. ACTUAL FIGURE 1 FIGURE 2
CAT.
PIPE COVERING COVERING MAX. ROLL ROLL WT.
NO.
SIZE THICKNESS THICKNESS LOAD SIZE A B SIZE A B EACH
C-789A-14
14 11⁄211⁄25,000 16 101⁄49 16–20 103⁄89 8.25
C-789B-14
14 2 2 5,000 18 103⁄493⁄816–20 103⁄493⁄89.20
C-789C-14
14 21⁄221⁄85,000 18 113⁄897⁄816–20 111⁄497⁄810.04
C-789D-14
14 3 3 5,000 18 12 101⁄216–20 113⁄4101⁄211.00
C-789E-14
14 4 4 5,000 24 131⁄4113⁄422–24 123⁄8113⁄415.50
C-789-14
14 4 4 11,000 24 123⁄4111⁄422–24 117⁄8111⁄427.60
C-789-14
14 51⁄251⁄211,000 24 15 131⁄824 141⁄2131⁄836.60
C-789A-16
16 11⁄211⁄25,000 18 111⁄893⁄416–20 111⁄493⁄48.25
C-789B-16
16 2 2 5,000 20 113⁄4101⁄416–20 115⁄8101⁄49.20
C-789C-16
16 21⁄221⁄27,200 20 121⁄4103⁄416–20 121⁄4103⁄413.69
C-789D-16
16 3 3 7,200 24 127⁄8111⁄822–24 127⁄8111⁄814.65
C-789E-16
16 4 4 7,200 24 14 121⁄422–24 139⁄16 121⁄415.50
C-789-16
16 4 4 11,000 24 14 121⁄422–24 135⁄8121⁄430.10
C-789-16
16 51⁄251⁄211,000 30 161⁄5137⁄830 153⁄4137⁄839.00
C-789A-18
18 11⁄211⁄25,000 20 121⁄4103⁄416–20 121⁄4103⁄49.35
C-789B-18
18 2 2 7,200 24 131⁄8115⁄822–24 123⁄8115⁄812.00
C-789C-18
18 21⁄221⁄27,200 24 131⁄2113⁄422–24 13 113⁄414.19
C-789D-18
18 3 3 7,200 24 14 121⁄422–24 131⁄2121⁄415.25
C-789E-18
18 4 4 7,200 24 153⁄8135⁄822-24 145⁄8135⁄821.00
C-789-18
18 4 4 13,200 24 151⁄8133⁄822–24 143⁄8133⁄840.30
C-789-18
18 51⁄251⁄213,200 30 171⁄315 30 167⁄815 52.10
C-789A-20
20 11⁄211⁄27,200 24 131⁄2113⁄422–24 13 113⁄411.05
C-789B-20
20 2 2 7,200 24 14 121⁄422–24 131⁄2121⁄412.40
C-789C-20
20 21⁄221⁄27,200 24 145⁄8127⁄822–24 141⁄8127⁄814.19
C-789D-20
20 3 3 7,200 24 151⁄4133⁄426–30 147⁄8133⁄415.25
C-789E-20
20 4 4 7,200 30 161⁄2141⁄426–30 153⁄4141⁄422.80
C-789-20
20 4 4 13,200 7 165⁄8143⁄826–30 157⁄8143⁄844.80
C-789-20
20 51⁄251⁄213,200 30 181⁄316 30 177⁄816 52.10
C-789A-24
24 11⁄211⁄27,200 30 163⁄8141⁄826–30 153⁄4141⁄812.90
C-789B-24
24 2 2 7,200 30 163⁄8141⁄826–30 153⁄4141⁄813.90
C-789C-24
24 21⁄221⁄27,200 30 17 143⁄426–30 165⁄8143⁄418.07
C-789D-24
24 3 3 7,200 30 171⁄2151⁄426–30 171⁄8151⁄419.35
C-789E-24
24 4 4 7,200 30 183⁄4161⁄226–30 18 161⁄223.10
C-789-24
24 4 4 13,200 30 187⁄8165⁄826–30 181⁄8165⁄845.40
Pipe Saddles & Pipe Shields
Standard Finish – GoldGalv
®
, unless otherwise stated.
C-789
12"
A
B
A
B
Figure 2Figure 1
Covering
Thickness
Center Rib
Sizes 12"
& Larger
tnb07_gm102_F_80_81 1/18/08 4:22 PM Page F-80
Metal Framing, Pipe Hangers and Accessories
A-3
F-81
Pipe Straps, Conduit Clamps & Hangers
RC-729 — Adjustable Roll Support
Pipe Saddles and Pipe Shields
Standard Finish – GoldGalv
®
, unless otherwise stated.
Standard Finish – GoldGalv
®
, unless otherwise stated.
C-790 — Insulation Shield
Designed to protect the insulation and distribute the load at the hanger point.
This item is usually used with our C-710 Clevis Hanger.
Approvals: Federal Specification A-A-1192A Type 40, MSS-SP-69 Type 40.
Material: Carbon Steel.
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”).
Ordering: Specify hanger size, and catalog number.
C-790
CAT.
INSIDE CLEVIS
NO.
DIAMETER HANGER SIZE LENGTH WT.EACH
C-790-1A
23⁄82 12 0.62
C-790-2A
27⁄821⁄212 0.76
C-790-3A
31⁄23 12 0.92
C-790-4A
43
1⁄212 1.04
C-790-5A
41⁄24 12 1.16
C-790-6A
5 5 12 1.32
C-790-7A
55⁄85 12 1.46
C-790-8A
65⁄86 12 1.58
C-790-9A
75⁄87 12 1.74
C-790-10A
85⁄88 12 2.02
C-790-11B
95⁄810 12 2.28
C-790-12B
103⁄410 12 2.54
C-790-13C
113⁄412 12 2.84
C-790-14C
123⁄412 12 4.18
C-790-15C
14 14 12 4.58
C-790-16C
15 16 12 4.90
C-790-17C
16 16 12 5.20
C-790-18C
17 18 12 5.53
PIPE
SIZES 1⁄23⁄411
1⁄22
Insulation Thickness (Inches)
1⁄21A* 1A — — —
3⁄41A 1A 2A 4A 6A
11A2A 3A 5A7A
11⁄42A 3A 4A 6A 7A
11⁄22A 3A 4A 6A 7A
23A4A 5A 7A8A
21⁄24A 5A 6A 7A 8A
35A6A 7A 8A9A
31⁄2— — 8A 9A 10A
4 — — 8A 9A 10A
5 — — 9B 10B 11B
6 — — 10B 11B 12B
8 — — — 13C 14C
10 — — 14C 15C 16C
12 — — 16C 17C 19C
14 — — 17C 19C —
Shield Size Selection Table
M-117 — Eye Socket
Designed for attaching a rod to split ring type clamps.
M-117 is only available in 1⁄4", 3⁄8", and 1⁄2" rod sizes.
Material: Malleable Iron.
Compliance: Federal Specification WW-H-171E Type 16,
MSS-SP-69 (Type 16).
Finish: Plain, Copper.
Ordering: Specify rod size and catalog number.
CAT.
ROD SIZE MAX. MAX. WT.
NO.
A LOAD B E EACH
M-117-1/4
1⁄4240 1⁄413⁄80.08
M-117-3/8
3⁄8610 1⁄413⁄80.08
M-117-1/2
1⁄21,000 1⁄419⁄16 0.11
M-117-5/8
5⁄81,400 3⁄813⁄40.22
M-117-3/4
3⁄42,200 1⁄221⁄40.30
M-117-7/8
7⁄82,300 1⁄227⁄16 0.32
M-117
C-790
A
E
Rod Size
"B" Max. Dia.
tnb07_gm102_F_80_81 1/18/08 4:22 PM Page F-81
Metal Framing, Pipe Hangers and Accessories
F-82
Pipe Straps, Conduit Clamps & Hangers
Rods and Rod Attachments
Standard Finish – GoldGalv
®
, unless otherwise stated
Sizes of CL-710 OR C-710 Clevis
PIPE
SIZES 1⁄23⁄411
1⁄22
For Use with Shields Outside of Insulation. Insulation Thickness (Inches)
1⁄222 —— —
3⁄422 2
1⁄231⁄25
122
1⁄234 5
11⁄421⁄2335 5
11⁄221⁄233
1⁄255
233
1⁄245 6
21⁄231⁄2455 6
345 56 8
31⁄2—— 6 8 8
4—— 68 8
5—— 88 10
6 — — 8 10 10
8 — — — 12 12
10 — — 12 — —
How to Order Shield Size Selection Table
CAT.
PIPE
NO.
SIZES D F 1 1D 2
Insulation Thickness (Inches)
C-790-1/2
1⁄21A* 1A — — —
C-790-3/4
3⁄41A 1A 2A 4A 6A
C-790-1
11A 2A 3A 5A7A
C-790-1-1/4
11⁄42A 3A 4A 6A 7A
C-790-1-1/2
11⁄22A 3A 4A 6A 7A
C-790-2
23A 4A 5A 7A8A
C-790-2-1/2
21⁄24A 5A 6A 7A 8A
C-790-3
35A 6A 7A 8A9A
C-790-3-1/2
31⁄2— — 8A 9A 10A
C-790-4
4 — — 8A 9A 10A
C-790-5
5 — — 9B 10B 11B
C-790-6
6 — — 10B 11B 12B
C-790-8
8 — — — 13C 14C
C-790-10
10 — — 14C 15C 16C
C-790-12
12 — — 16C 17C 18C
C-790-14
14 — — 17C 18C —
*For Unarco foam specify X1A
E-151 — Lag Rod
Designed for a vertical rod connection to wood.
Material: Carbon Steel
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”)
Ordering: Specify rod diameter, rod length, catalog number and finish
E-151
WT. EACH
MIN. LENGTH LENGTH — DIMENSION “L”
CAT.
ROD MAX. MACHINE COACH 4 6 8 10 12
NO.
SIZE LOAD B C 114 152 203 254 356
E-151-3/8
3⁄8390 21⁄22 0.12 0.19 0.25 0.31 0.37
E-151-1/2
1⁄2640 21⁄22 0.22 0.34 0.44 0.56 0.67
E-151-5/8
5⁄8750 21⁄221⁄20.35 0.53 0.70 0.87 0.59
E-151
A
BC
L
tnb07_gm102_F_82_83 1/17/08 5:22 PM Page F-82
Metal Framing, Pipe Hangers and Accessories
A-3
F-83
Pipe Straps, Conduit Clamps & Hangers
Rods and Rod Attachments
E-156 — Machine Thread Eye Rod
Designed to permit swing in the attachment component due to pipe
movement. The inside diameter of the eye is c" larger than the rod diameter
for rod sizes up to 11⁄2" while the inside diameter for larger size rods will be
3⁄4" greater. The eye is not welded. The E-157 Welded Eye Rod is available
for higher load requirements.
Material: Carbon Steel
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”)
Temperature: 650°F / 343°C Maximum
Ordering: Specify rod size, rod length, thread length, (if other
than standard), catalog number and finish.
E-156
E-157 — Machine Thread Eye Rod
Welded Eyerods are designed to permit swing in the
attachment component due to pipe movement.
Material: Carbon Steel. Larger rod diameters over 21⁄2", special
materials, and special eye dimensions can be furnished
upon request
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”)
Ordering: Specify catalog number, finish, rod size, rod length
and thread length if other than standard
E-157
E-157
A3⁄81⁄25⁄83⁄47⁄811
1⁄411⁄213⁄422
1⁄421⁄2
B3⁄47⁄811
1⁄811⁄413⁄815⁄817⁄821⁄223⁄433
1⁄4
Thread 33 3 3 44 46 6666
Length D
Load at 610 1,130 1,810 2,710 3,770 4,960 8,000 11,630 15,700 20,700 27,200 33,500
650°F/343°C
Load at 540 1,010 1,610 2,420 3,360 4,420 7,140 10,370 14,000 18,460 24,260 29,880
750°F/399°C
Standard Finish – GoldGalv
®
, unless otherwise stated
A
B
D
Specify
E-156
A3⁄81⁄25⁄83⁄47⁄811
1⁄411⁄213⁄422
1⁄421⁄2
C3⁄47⁄811
1⁄811⁄413⁄815⁄817⁄821⁄223⁄433
1⁄4
D21⁄221⁄221⁄233
1⁄24566666
Load 240 440 705 1,050 1,470 1,940 3,170 4,650 6,380 8,280 10,900 13,400
A
D
C
Specify
tnb07_gm102_F_82_83 1/17/08 5:23 PM Page F-83
Metal Framing, Pipe Hangers and Accessories
F-84
Pipe Straps, Conduit Clamps & Hangers
F-111
CAT.
ROD MAX. LOAD PIN/BOLT SIZE WT.
NO.
SIZE 650°F/343°C DIA. NO. P EACH
F-111-3/8
3⁄8610 1⁄229⁄16 0.77
F-111-1/2
1⁄21,130 5⁄8211⁄16 0.77
F-111-5/8
5⁄81,810 3⁄4213⁄16 0.77
F-111-3/4
3⁄42,710 7⁄821⁄21 2.50
F-111-7/8
7⁄83,770 1 21⁄211⁄82.50
F-111-1
1 4,960 11⁄831
1⁄44.00
F-111-1-1/4
11⁄48,000 13⁄831
1⁄24.00
F-111-1-1/2
11⁄211,630 15⁄831⁄213⁄46.00
F-111-1-3/4
13⁄415,700 17⁄84 2 8.00
F-111-2
2 20,700 21⁄452
3⁄816.00
F-111-2-1/4
21⁄427,200 21⁄262
5⁄826.00
F-111-2-1/2
21⁄233,500 23⁄462
7⁄836.00
Standard Finish – GoldGalv
®
, unless otherwise stated
F-111
F-111 — Forged Steel Clevis
E-120-A
CAT.
ROD TAP MAX. LOAD WT.
NO.
A 650°F/343°C F EACH
E-120-A-3/8
3⁄8610 1 0.20
E-120-A-1/2
1⁄21,130 1 0.31
E-120-A-5/8
5⁄81,810 1 0.55
E-120-A-3/4
3⁄42,710 1 1.00
E-120-A-7/8
7⁄83,770 13⁄81.55
E-120-A-1
1 4,960 13⁄42.45
E-120-A-1-1/4
11⁄48,000 13⁄43.75
E-120-A-1-1/2
11⁄211,630 13⁄46.75
E-120-A-1-3/4
13⁄415,700 31⁄416.40
E-120-A-2
2 20,700 31⁄416.75
E-120-A-2-1/4
21⁄427,200 31⁄416.75
E-120-A-2-1/2
21⁄233,500 31⁄416.75
Standard Finish – GoldGalv
®
, unless otherwise stated
E-120-A
E-120-A — Forged Weldless Eyenut
Rod and Rod Attachments
P
Grip
NOTE: Pins and Cotter Pins supplied when requested as Fig. F-111.
Tap
E
Take
Out
A
F
Used to connect rod ends with structural steel welded beam attachments
or pipe clamps as a substitute for a welded eyerod. It provides a pivot point
and adjustment. It can also be supplied tapped left hand as E-120-A.
Material: Forged Steel
Compliance: Federal Specification A-A-1192A Type 17, MSS-SP 69
Type 17, and BSPSS-BS3974
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”)
Ordering: Specify catalog number, rod size and finish
Used to connect rod ends with structural steel welding lug plates or lugs
welded to pipe. It provides a pivot point and adjustment. It can be supplied
with a pin as F-111.
Material: Forged Steel
Compliance: Federal Specification A-A-1192A Type 14, MSS-SP 69
Type 14 and BSPSS-BS3974
Finish: Standard Finish – GoldGalv®, Black (add suffix “-B”),
Electro-Galvanized (add suffix “-EG”)
Ordering: Specify catalog number, rod size, pin size, grip “G” and
finish
C
L
tnb07_gm102_F_84_85 1/17/08 5:09 PM Page F-84
Metal Framing, Pipe Hangers and Accessories
A-3
F-85
Surface Raceway & Lighting Systems
DEFLECTION
CHANNEL AT 10 FT. AT 12 FT. AT 14 FT.
A-1200 1⁄4"1⁄2"3⁄4"
C-1200 3⁄8"3⁄4"*
A-1400 3⁄8"3⁄4"*
DEFLECTION
CHANNEL AT 6 FT. AT 7 FT. AT 9 FT.
B-1200 3⁄8"9⁄16"5⁄8"
B-1400 1" 1⁄2"*
*Not recommended for this spacing
UL®Listed Channels
• A-1200 • B-1200
• A-1200-KO • B1200AL
• A-1200 AL • B-1400
• A-1200 PG • C-1200
• A-1400 • E-1200
• A-1400-KO • H-1200
• A-1400 SS
Maximum Number of Wires
Raceway
With or
Without
Wire KO
Size A-1200 B-1200 E-1200
Avg A-1400 B-1400 C-1200 H-1200
AB A BABAB
14 6 10 4 6 5 10 6 10
12 6 10 3 6 4 10 6 10
10 5 8 — — 4 6 5 8
846——3446
623——2223
Materials
Superstrut®electrical raceway,
fixture hanging channel, closure
strip and accessories are cold
formed from hot rolled strip steel.
Design Data
Deflections at various hanger rod
spacings for raceway channels
based on 40 to 45 lbs. per fixture.
Electrical Raceway
Superstrut®channel together with snap in closure strip is listed by Underwriters
Laboratories as a surface metal raceway. Other accessories listed by
Underwriters Laboratories are identified on the drawings.
Series 800 Surface Raceway and Lighting Systems
Column A
Suitable for number of wires indicated when used as a raceway. Also
suitable for number of wires indicated when installed to support and
supply electric discharge type fixtures when raceway wiring is suitable
for not less than 75°C.
By providing clearance between fixture and raceway of
not less than 1⁄2", were suitable for 60°C may be used.
Column B
Suitable for number of wires indicated when used as a raceway.
Also suitable for number of wires indicated when installed to support
electric discharge type fixtures when clearance of not less than 1⁄8"
is provided between raceway and fixture and when wiring is suitable
for 75°C.
GoldGalv®hardware finish is standard for all Superstrut products.
This is a multi-process finish of electro-plated zinc, followed by gold
colored zinc dichromate to give excellent corrosion resistance and
a superior paint base. See page F-4 for a complete description
of the GoldGalv®hardware finish. GoldGalv®hardware finish will be
furnished if no other finish is specified.
Electrical Applications
tnb07_gm102_F_84_85 1/17/08 5:09 PM Page F-85
Metal Framing, Pipe Hangers and Accessories
F-86
Surface Raceway & Lighting Systems
822
Page F-88
Electrical Applications
(continued)
Surface Raceway Systems
H104
Page F-13
AB-888
Page F-89
805
Page F-88
AB-844
Page F-89
A-853
Page F-88
A-854
Page F-88
A-853
Page F-88
AB-803
Page F-89
AB-885
Page F-89
AB-866
Page F-89
811
Page F-88
804
Page F-88
802
Page F-88
E-145
Page F-11
A-854
Page F-88
Standard Finish – GoldGalv
®
brand
A-1200-HS
Page F-7
tnb07_gm102_F_86_87 1/17/08 5:14 PM Page F-86
Metal Framing, Pipe Hangers and Accessories
A-3
F-87
Surface Raceway & Lighting Systems
A-854
Page F-88 AB-288
Page F-17
E-145
Page F-11
ES-145
Page F-11
Electrical Applications
(continued)
452TB
Concrete Spot Insert
Page F-23
Order nuts
separately
S-541
Swing Connector
Page F-26
500
Beam Clamp
Page F-26
US-563
Beam Clamp
Page F-28
U-569
Beam Clamp with
Safety Rod
Page F-29
U-579
Ceiling Flange
Page F-26
540
Side Beam
Hanger Clip
Page F-26
Standard Finish – GoldGalv
®
brand
A-891
Page F-88
AB-844
Page F-89
A-892
Page F-88
AB-888
Page F-89
A-853
Page F-88
A-854
Page F-88
802
Page F-88
A-1200-P
Page F-7
tnb07_gm102_F_86_87 1/17/08 5:14 PM Page F-87
Metal Framing, Pipe Hangers and Accessories
F-88
CAT.
STD.
NO.
FOR CHANNEL CTN.
A804 A-1200 25
A-1400 25
B804 B-1400 25
C-804 C-1200 25
E-804 E-1200 25
H-804 H-1200 25
CAT.
STD.
NO.
FOR CHANNEL CTN.
A802 A Series 25
B-802 B Series 25
E-802 E Series 10
H-802 H Series 10
804
End Cap
CAT.
STD.
NO.
FOR CHANNEL CTN.
A805 A Series 25
H-805 H Series 25
805
End Cap with Knockout
CAT.
STD.
NO.
FOR CHANNEL CTN.
811 1-STR 1⁄4x 1 50
811-2STR 1⁄4x 11⁄450
CAT.
STD.
NO.
FOR CHANNEL CTN.
A-809 A Series 25
H-809 H Series 25
811
Stud Nut
KO for 1⁄2" conduit. Furnished
complete with 1⁄4" x 5⁄8" flat Head
Machine Screw and AB-100-1⁄4" nut.
For attaching fixture to Slot Down
Channel or to Slot up Knockouts.
Specific length. Hex Nut included.
12 ga for 3⁄4" or 1" Conduit.
Furnished complete with 1⁄4" x 5⁄8"
Flat Head Machine Screw and
AB-100-1⁄4" nut.
802
Raceway Joiner with Reinforcing Plate
furnished complete with nuts.
A-243-1
End Cap for A-1200 Channel
Fixture Fittings
809
Tapped End Cap
Surface Raceway & Lighting Systems
822
Raceway Jointer & Seal
7
1
⁄
4
"
A
3
⁄
4
"–16 UNF Thread
A-213
1
21
⁄
32
"
3
⁄
32
"
1
3
⁄
8
"
4
1
⁄
2
"
A889*
A891*
A890*
Listed
*
7
⁄
8
"
A854L
Channel Hanger
Long Illustration showing A-854-L
with nut and bolt furnished to attach to
fluorescent fixture. Long
type for all series channel.
CAT.
STD.
NO.
A FOR CHANNEL CTN.
A822*1
11⁄16 A Series 25
B-822*7⁄8B Series 25
C-822*1
7⁄16 C Series 25
A853
Channel Hanger
Use hanger rod 3⁄8" or 1⁄2".
Use with “A”, “B”, or “C” series
single channel.
A853L
Channel Hanger
Long type for all
series channel.
A892* A893
A854
Channel Hanger
Illustration showing A-854 with nut and bolt
furnished to attach to fluorescent fixture. Use
with “A”, “B” or “C” series channel.
tnb07_gm102_F_88_89 1/18/08 4:26 PM Page F-88
Metal Framing, Pipe Hangers and Accessories
A-3
F-89
CAT.
MAX. CABLE STD.
NO.
DIAM. CTN.
AB-880 33
AB-881 44
1⁄2
AB-880 AB-881
3" and 4" Porcelain Saddles
21⁄4"
25⁄32
Surface Raceway & Lighting Systems
AB803*
Cast Conduit Connector
To connect
1
⁄
2
" or
3
⁄
4
" conduit to raceway
channel — Furnished complete with stud nuts
& hex nuts. Part has removable bushing to
increase size from
1
⁄
2
" to
3
⁄
4
".
AB815
Swing Connector
Nuts & bolts to clamp to channel
included. For
1
⁄
2
" or
3
⁄
4
" conduit.
43⁄4"
AB-844*
Steel Closure Strip
AB-844-PC*
Plastic Closure Strip
1
5
⁄
8
"
Fixture Fittings
(continued)
AB888*
Duplex Outlet
Complete unit including housing, standard
DUPLEX 3-wire, 15 Amp., 125 volt, NEMA
ground receptacle and cover plate.
AB887*
Single Outlet
Complete unit including housing, standard
SINGLE 3-wire, 15 Amp., 125 volt, NEMA
ground receptacle and cover plate.
11⁄8"
1⁄32"
1
3
⁄
8
"
11⁄2"
AB-866
1
⁄
2
" Pipe thread
AB868
Fiber Retainer for cables
until closure strip is installed.
AB867*
Spacer Clevis
For use with AB-866 wiring stud nuts.
AB885
15° Swivel
Nuts and bolts to clamp to channel
included. For
1
⁄
2
" or
3
⁄
4
" conduit.
4"
When used as a raceway channel, it is normally
installed with the slot up and after wiring is
complete, the closure strip is installed. For all
channels. Standard lengths 10 ft.
Listed
*
tnb07_gm102_F_88_89 1/18/08 4:26 PM Page F-89
Metal Framing, Pipe Hangers and Accessories
F-90
Special Metals
Stainless Steel Channel
Elements of sections are the same as shown on pages F-104–F-113 for standard
steel channel. Load ratings meet or exceed ratings for standard steel channel shown
elsewhere in this catalog.
Additional stainless steel and aluminum items are available. Contact your local
Superstrut representative.
Stainless Steel (Suffix SS/Type 304 and 6SS/Type 316)
Superstrut stainless steel products are made from high-quality austenitic Type 304 and
Type 316 material. Stainless steel contains large amounts of chromium and nickel, is
non magnetic and offers superior corrosion resistance. Tolerant to high-temperature
environments, Superstrut’s stainless steel framing provides dependable support,
resulting in reduced maintenance cost. The channel is roll-formed to shape
when cold, enhancing its structural strength for the most rigid of applications.
Properties for Design
Span (IN.): 12, 18, 24, 30, 36, 42, 48, 54, 60, 72, 84, 96, 108, & 120.
Safe Uniform Total Load Table (X-X AXIS)
SPAN B-1200-AL A-1200-AL A-1202-AL
(IN.) (LBS.) (LBS.) (LBS.)
12 540 1490 4130
18 270 990 2760
24 150 730 2070
30 90 470 1650
36 60 320 1370
42 50 240 1180
48 — 180 930
54 — 140 730
60 — 110 590
72 — 80 410
84 — 60 300
96 — 40 230
108 — 30 180
120 — 20 140
Properties for Design Aluminum Channel (Suffix AL)
Y
Y
XX
1
5
⁄
8
"
.719
Y
Y
XX
.315
Y
Y
XX
3
1
⁄
4
"
M
Typical Physical and Mechanical Properties
and Characteristics
Alloy and Temper: 6063-T6
Tensile Strength: Yield — 25,000 PSI
Ultimate — 30,000 PSI
Shear — Ultimate: 19,000 PSI
Elongation: (Percent in 2 inches) -12
Density: 0.098 Lbs./Cu. Inch
Modules of Elasticity: 10 X 106 PSI
12 ga. = .105"
I — Moment of inertia
S — Section of Modulus
r — Radius of Gyration
A — Area
Calculations based on maximum fibre stress of
10,000 PSI, maximum deflection 1/360th of span.
For concentrated loads, multiply load by 0.50.
1
5
⁄
8
"
1
5
⁄
8
"
1
5
⁄
8
"
1
5
⁄
8
"
X - X AXIS Y - Y AXIS
Section A I S r I S r
Member IN.2
2IN.4IN.3IN. IN.4IN.3IN.
A-1200 .563 .198 .224 .594 .274 .338 .698
B-1200 .400 .041 .082 .320 .150 .185 .612
A-1202 1.126 1.001 .620 .942 .548 .676 .698
tnb07_gm102_F_90_91 1/17/08 5:15 PM Page F-90
Metal Framing, Pipe Hangers and Accessories
A-3
F-91
Special Metals
Aluminum Products (AL Suffix)
A-1202
1
5
⁄
8
"
12 ga.
3
1
⁄
4
"
1
5
⁄
8
"
7
⁄
8
"
1
5
⁄
8
"
7
⁄
8
"
13
⁄
16
"
1
5
⁄
8
"
7
⁄
8
"
1
5
⁄
8
"
1
5
⁄
8
"12 ga.
A Series
A-1200-HS
Slots 2" on center.
Slot size
9
⁄
16
" x 1
1
⁄
8
"
B-1200
B Series
B-1202
A-100
Regular Spring Nut
702
Rigid Conduit Pipe Strap
AB-100
Springless Nut
A-1200
1
5
⁄
8
" deep channel and combination
tnb07_gm102_F_90_91 1/17/08 5:15 PM Page F-91
Metal Framing, Pipe Hangers and Accessories
F-92
Special Metals
A-1200
E-145
Standard Hex Nut
EF-147
Fender Washer
A-1202-HS
A-1202
B-100
Short Spring Nut
B-1400
A-1200-HS
A-100
Regular Spring Nut
B-1400-HS
E-142
Hex Head Cap Screw
Type #304 Stainless Steel Products (SS Suffix)
1
5
⁄
8
"
1
5
⁄
8
"
7
⁄
8
"
1
5
⁄
8
"
7
⁄
8
"
13
⁄
16
"
7
⁄
8
"
7
⁄
8
"
A Series
B Series
AB-100
Springless Nut
tnb07_gm102_F_92_93 1/17/08 5:11 PM Page F-92
Metal Framing, Pipe Hangers and Accessories
A-3
F-93
Special Metals
Type #304 Stainless Steel Products (SS Suffix)
E-147
Flat Steel Washer
AB-241
CAT.
ROD STD.
NO.
SIZE CTN.
AB-241-1/4
1⁄4100
AB-241-3/8
3⁄8100
AB-241-1/2
1⁄2100
AB205AB201
H-119
Rod Coupling
H-104 & R Series Rod
•Hanger rod
•Continuous threaded
NATIONAL COARSE THREAD
CAT.
THREADS DESIGN STD.
NO.
SIZE PER INCH LOAD CTN.
H-104-1-1/4
11⁄420 150 500
H-104-3/8
3⁄816 610 500
H-104-1/2
1⁄213 1,130 500
H-104-5/8
5⁄811 1,810 500
H-104-3/4
3⁄410 2,710 500
H-104-7/8
7⁄89 3,770 500
H-104-1
1 8 4,960 500
Standard lengths 12' only
C-775L — Clamp with Lock Nut
CAT.
ROD DESIGN STD.
NO.
SIZE A B C D LOAD, LBS. CTN.
C-775L
3⁄83⁄83⁄423⁄823⁄8400 100
1⁄223⁄825⁄16 25⁄16 23⁄8500 100
U501, U502
CAT.
STD.
NO.
FOR CHANNEL A CTN.
U501
A-1200 A-1400 33⁄16 20
B-1200 B-1400
C-1200 B-1402
U502
A-1202 A-1402 413⁄16 20
C-1202 H-1200
Furnished complete
Design Load U501 — 2150 lbs.
U502 — 3000 lbs.
701 Series 702
Pipe and Rigid or
IMC Conduit Clamp
tnb07_gm102_F_92_93 1/17/08 5:11 PM Page F-93
Metal Framing, Pipe Hangers and Accessories
F-94
Special Metals
6H Series 6H-B Series
Conduit and Pipe Hanger
AB204
X207
AB219 AW219
AB213
AB202
X201
AB214
AB207
AB203
2"
5
3
⁄
8
"
9
5
⁄
32
"
3
7
⁄
8
"
1
5
⁄
8
"1
21
⁄
32
"
1
5
⁄
8
"
2
1
⁄
4
"
3
5
⁄
8
"
7
1
⁄
4
"
3
3
⁄
4
"
3
5
⁄
8
"
AB206
Type #304 Stainless Steel Products (SS Suffix)
tnb07_gm102_F_94_95 1/17/08 5:17 PM Page F-94
Metal Framing, Pipe Hangers and Accessories
A-3
F-95
Special Metals
AP-235
C-727
Standard Ring Hanger
C-725C-710 Series
Standard Clevis
C-710 Series
Standard Clevis
AP-232
S-250
A is in lengths: 6,12,18 & 24.
May be installed inverted with no change
in load ratings. Strut section made from
half slot channel.
5
5
⁄
8
"
3
1
⁄
2
"
45˚ 45˚
2
1
⁄
2
"
3
1
⁄
2
"3"
2
5
⁄
16
"
1
1
⁄
16
"
1
5
⁄
8
"1
11
⁄
16
"
3
1
⁄
2
"
3
⁄
4
" Dia.
4
1
⁄
4
"4
1
⁄
4
"
6"
6"
3
1
⁄
2
"
1
11
⁄
16
"
4 Holes
3
⁄
4
" Dia.
3
1
⁄
4
"
3
⁄
4
" Dia.
3
1
⁄
2
"
6"
6"
4 Holes
3
⁄
4
" Dia.
3
1
⁄
2
"
6"
4
1
⁄
4
"
4
3
⁄
4
"
3"
3
5
⁄
16
"
4
5
⁄
8
"
AB225AB220 SPAB-227
AP-232SQ
A-716
Cushioned Clamp Tube Series
AP-235SQ
Type #304 Stainless Steel Products (SS Suffix)
4
1
⁄
4
"
6"
tnb07_gm102_F_94_95 1/17/08 5:17 PM Page F-95
Metal Framing, Pipe Hangers and Accessories
F-96
Special Metals
702
Pipe and Rigid or IMC Conduit Clamp
AB220
AB203 AB205
AB225
B-1400-HS-T316SS
7
⁄
8
"
7
⁄
8
"
3
1
⁄
2
"
5
3
⁄
8
"
2
1
⁄
2
"
45˚
1
5
⁄
8
"
1
5
⁄
8
"
7
⁄
8
"1
5
⁄
8
"
7
⁄
8
"
13
⁄
16
"
3
1
⁄
2
"
A Series
B Series
Type #316 Stainless Steel Products (T316SS Suffix)
A-1200-HS-T316SS
A-1200-T316SS B-1400-T316SS
AB201
tnb07_gm102_F_96_97 1/17/08 5:12 PM Page F-96
Metal Framing, Pipe Hangers and Accessories
A-3
F-97
Special Metals
A-1202-HS
AB205AW204
B-1400
1
5
⁄
8
"
1
5
⁄
8
"
7
⁄
8
"1
5
⁄
8
"
7
⁄
8
"
13
⁄
16
"
7
⁄
8
"
2
1
⁄
2
"
2
1
⁄
2
"
4
7
⁄
8
"
1
7
⁄
8
"
2"
1
7
⁄
8
"
2"
1
7
⁄
8
"
A Series B Series
A-1200
B-1400-HS A-1202
A-1200-HS
AB201 AB219AB201
White Painted Products for the Computer Industry (WH Suffix)
7
⁄
8
"
AB203
tnb07_gm102_F_96_97 1/17/08 5:12 PM Page F-97
Metal Framing, Pipe Hangers and Accessories
F-98
Special Metals
White Painted Products for the Computer Industry (WH Suffix)
5c"
1e"
AW205 L AW-205-R N-205
AB-206 AB-207 X-207
A210
For attaching A Series channel
A218 AB-219
N-219 AB-220 AB-227-WH
1
3
⁄
4
"1
7
⁄
8
"1
7
⁄
8
"1
3
⁄
4
"
3
7
⁄
8
"
3
3
⁄
4
"1
1
⁄
16
"
1"
5
3
⁄
8
"
1
5
⁄
8
"
5
7
⁄
16
"
1
21
⁄
32
"
1
5
⁄
8
"
3
7
⁄
8
"
3
1
⁄
2
"
5
3
⁄
8
"
5
3
⁄
8
"
3
1
⁄
2
"
45˚
1
1
⁄
16
"
2
5
⁄
16
"
a3
1
⁄
2
"
5
3
⁄
8
"
7
1
⁄
4
"
3
1
⁄
2
"
3
1
⁄
2
"
3"
tnb07_gm102_F_98_99 1/17/08 5:11 PM Page F-98
Metal Framing, Pipe Hangers and Accessories
A-3
F-99
Special Metals
AP-235SQ B 804 NEOP WH
1
5
⁄
8
" x
13
⁄
16
"
White End-Cap
AP-235
SPAB-844-PC — White
White Closure Strip
For all channels
AP-232SQ
AB253
AB-241
CAT.
ROD STD.
NO.
SIZE CTN.
AB-241-1/4 1⁄4100
AB-241-3/8 3⁄8100
AB-241-1/2 1⁄2100
5
3
⁄
8
"
3
⁄
4
"
1
5
⁄
8
"1
11
⁄
16
"3
1
⁄
2
"
4
1
⁄
4
"4
1
⁄
4
"
6" 6"
4 Holes
3
⁄
4
" Dia.
1
11
⁄
16
"
4
1
⁄
4
"4
1
⁄
4
"
6" 6"
4 Holes
3
⁄
4
" Dia.
3
5
⁄
8"
3
5
⁄
16
"
1
1
⁄
4
"1
5
⁄
8
"
1
5
⁄
8
"
3
1
⁄
4
"
1
1
⁄
4
"3
1
⁄
4
"
1
5
⁄
8
"
1
1
⁄
4
"1
5
⁄
8
"
13
⁄
16
"
5
3
⁄
8
"
3
1
⁄
2
"
3
1
⁄
4
"
3
⁄
4
" Dia.
3
1
⁄
2
"
6"
AP-232
A804 NEOP WH
15⁄8" x 15⁄8"
White Plastisol End-Cap
White Painted Products for the Computer Industry/Clean Room Applications
(WH Suffix)
H804 NEOP WH
1
5
⁄
8
" x 3
1
⁄
4
"
White Plastisol End-Cap
tnb07_gm102_F_98_99 1/17/08 5:11 PM Page F-99
Metal Framing, Pipe Hangers and Accessories
Slotted Angle Metal Framing
Superangle Slotted Angle Metal Framing
With Superangle you Get Flexibility —
Simplicity — Economy!
Create the support framing you need.
Superangle is manufactured from structural quality steel in three different sizes. The small
sizes are 14 ga. steel, the larger size is 12 ga. steel. With this offering, an endless variety of
metal framing requirements can be met, from light weight supporting needs to larger shelving
for inventory storage.
One of the legs on all sizes are 15⁄8" wide, while the other is either 15⁄8", 2 3⁄8" or 31⁄8" long.
Depending on the frame requirements, a single size can be utilized throughout, or the sizes
can be interchanged to get the most efficient usage from the material.
Installation time is reduced — inventory space is minimal.
Scribe marks are placed every 3⁄4" which saves planning, layout and cutting time and provides
accuracy. The exclusive slot and hole pattern, repeated every 3", is scientifically designed for
ease of assembly. The proper nuts and bolts are included with the material to ensure fast
and easy erection.
Superangle Metal Framing is packaged in 10' and 12' lengths to minimize cutoffs and
ensure maximum use of material.
120´, 10, 12´ lengths of Superangle takes up the same amount of space as one
2 x 4. A standard package includes 5 pieces to a bundle, therefore handling and
storage space are significantly reduced.
The importance of cutting Superangle easily, quickly and accurately is the key to time saving
assembly. The Portable Cutter provides these advantages and makes layout and erection
of any structure a light-work job.
Finish is designed for long lasting durability.
The standard GoldGalv®hardware finish is applied to all Superangle products after rolling and
punching of the holes. This provides you with a number of benefits. First, raw ends resulting
from cuts will be protected by the sacrificial quality of zinc. Second, the edges of all holes
are protected against formation of rust, to provide a call back free installation. Third, the
electro-galvanizing provides an excellent bonding surface for paint if desired for
aesthetic reasons.
NOTE: Product is also available with Pre-galvanized (PG) sections
F-100
tnb07_gm102_F_100_101 1/18/08 9:46 AM Page F-100
Metal Framing, Pipe Hangers and Accessories
Slotted Angle Metal Framing
CAT.
STD.
NO.
LG. FT. CTN.
RA-160-10 10' 50 1,000
RA-160-12 12' 60 1,200
RA-225-10 10' 50 1,000
RA-225-12 12' 60 1,200
RA 300 10 10' 50 1,000
RA-300-12 12' 60 1,200
5 LGS. 36 Nuts and Bolts
CAT.
PACKAGE STD.
NO.
100 SETS CTN.
RA BN 5/8 3⁄8"–16 x 5⁄8" lg. 100
Use with RA-160 & RA-225
RA BN 3/4 3⁄8"–16 x 3⁄4" lg. 100
Use with RA-300.
RA-160
14 Gauge
RA-225
14 Gauge
RA-300
12 Gauge
RA-RC RA-SC
Extra Nuts and Bolts
RA-C
Portable Cutter
Rigid & Swivel Casters
Hard rubber composition 3
1
⁄
2
" dia.
with load rating of 225 lbs. per wheel.
CAT.
STD.
NO.
PACKAGE CTN.
RA GP 25 100
RA-GP
Gusset Plate
For extra rigid assembly.
A-3
F-101
Superangle Accessories
CAT.
STD.
NO.
PACKAGE CTN.
RA RC 22
RA SC 22
Casters
CAT.
STD.
NO.
PACKAGE CTN.
RA C 11
Portable Cutter
Gusset Plate
Extra Nuts and Bolts
Superangle Slotted Angle Metal Framing
tnb07_gm102_F_100_101 1/18/08 9:46 AM Page F-101
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
F-102
Nominal Thickness (IN.)
12 ga. = .105 I— Moment of Inertia
14 ga. = .075 S— Section of Modulas
16 ga. = .060 r— Radius of Gyration
Z— Nominal Axis
A— Area
Table 1 — Properties for Design: Single Channel
X-X AXIS Y-Y AXIS
CAT.
HW A I S R Z I S R
NO. IN. IN. IN.2 IN.4 IN.3 IN. IN. IN.4 IN.3 IN.
A-1200 1.625 1.625 .557 .192 .212 .587 .719 .237 .292 .652
B-1200 .813 1.625 .381 .031 .063 .283 .331 .137 .168 .600
C-1200 1.375 1.625 .500 .121 .155 .492 .595 .205 .252 .640
E-1200 2.438 1.625 .726 .529 .399 .853 1.112 .335 .413 .679
H-1200 3.250 1.625 .897 1.100 .635 1.107 1.507 .436 .536 .697
A-1400 1.625 1.625 .401 .134 .146 .577 .707 .184 .226 .677
B-1400 .813 1.625 .280 .024 .051 .295 .338 .103 .127 .607
Table 1 — Properties for Design: Double Channel
X-X AXIS Y-Y AXIS
CAT.
HW A I S R Z I S R
NO.
IN. IN. IN.2 IN.4 IN.3 IN. IN. IN.4 IN.3 IN.
A-1202 3.250 1.625 1.114 .948 .583 .992 1.625 .474 .584 .652
B-1202 1.626 1.625 .762 .147 .181 .439 .813 .274 .337 .600
C-1202 2.750 1.625 1.000 .595 .433 .772 1.375 .409 .504 .640
E-1202 4.876 1.625 1.450 2.854 1.171 1.402 2.438 .672 .827 .680
H-1202 6.500 1.625 1.794 6.273 1.930 1.870 3.250 .871 1.072 .697
A-1402 3.250 1.625 .801 .668 .411 .913 1.625 .367 .452 .677
B-1402 1.626 1.625 .560 .112 .138 .447 .813 .206 .254 .607
If connections will be subjected to dynamic or seismic
loading conditions, contact the factory for design assistance.
Elements of Sections
Single Channels Double Channels
SLIP PULL OUT
CHANNEL RESISTANCE STRENGTH
NO. LBS. LBS.
A-1200 1,500 2,000
C-1200 1,500 2,000
B-1200 1,400 1,400
A-1400 1,000 1,400
B-1400 1,000 1,400
Safety Factor of 3
W
YY
Y
Y
Z
Z
H
H
W
XX
XX
Design Data — Metal Framing Channel
Table 2 — Load Ratings for 1⁄2" Strut Nuts
used in Superstrut Channel
tnb07_gm102_F_102_103 1/18/08 9:46 AM Page F-102
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
A-3
F-103
Design Loads for Channel Used as Beam or Column.
Table 3
Beam Loads
Table 3 contains simple beam, uniformly-distributed loads calculated at 25,000 psi fiber
stress. Beam loads are based on channel being loaded across the x-x axis. Loads are also
listed at reduced deflections for long spans.
Maximum loads @ 25,000 psi stress
Maximum allowable deflections and maximum uniform loads for all spans @ 25,000 psi
fiber stress.
Reduced load for all 1/180 Span Deflection
For moderate deflections on the longer spans, reduced loads are listed which will produce
a deflection equal to 1/180 of the span. When maximum loads do not induce deflections
exceeding 1/180 x the span length reduced loads are not required.
Reduced load for 1/360 Span Deflection
For very slight deflections on the longer spans, reduced loads are listed which will produce
a deflection equal to 1/360 of the span. When maximum loads do not induce deflections
exceeding 1/360 x the span length reduced loads are not required.
Concentrated loads
To obtain values for concentrated loads from Table 3, multiply uniform load by 0.5
and deflection by 1.25.
Slotted, Punched or KO Channel
Reduce load rating 5%.
Long span deep beams
Support in a manner to prevent rotation at supports and tie between supports
to prevent twist.
Column Loads
Allowable column loads given are for uniform axial loading with pinned ends. For eccentric
loading or other end conditions reduce allowable loads according to standard engineering
practice.
Dynamic Loads
Allowable dynamic loads may be calculated by dividing the static loads shown in Table 3,
by 2.08.
Design Data — Metal Framing Channel (continued)
tnb07_gm102_F_102_103 1/18/08 9:46 AM Page F-103
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
F-104
Design Data — Metal Framing Channel
Table 3 — Single Channel
MAXIMUM 1/180 1/360
CAT.
UNIFORM SPAN SPAN COL.
NO.
DEPTH GA. LOAD DEFL. LOAD DEFL. LOAD DEFL. LOAD
12" Beam or Column
A-1200 15⁄812 3,534 .014 — .067 — .033 10,533
B-1200 13⁄16 12 1,050 .026 — .067 — .033 6,683
C-1200 13⁄812 2,584 .016 — .067 — .033 9,345
E-1200 27⁄16 12 6,650 .010 — .067 — .033 13,830
H-1200 31⁄412 10,583 .008 — .067 — .033 17,106
A-1400 15⁄814 2,434 .015 — .067 — .033 7,575
B-1400 13⁄16 14 850 .028 — .067 — .033 4,950
18" Beam or Column
A-1200 15⁄812 2,355 .033 — .100 — .050 10,2100
B-1200 13⁄16 12 700 .059 — .100 — .050 6,058
C-1200 13⁄812 1,723 .038 — .100 — .050 8,970
E-1200 27⁄16 12 4,434 .023 — .100 — .050 13,482
H-1200 31⁄412 7,055 .016 — .100 — .050 16,693
A-1400 15⁄814 1,623 .031 — .100 — .050 7,334
B-1400 13⁄16 14 566 .063 — .100 453 .050 4,150
24" Beam or Column
A-1200 15⁄812 1,766 .058 — .133 — .067 9,842
B-1200 13⁄16 12 525 .105 — .133 333 .067 5,315
C-1200 13⁄812 1,291 .066 — .133 — .067 8,545
E-1200 27⁄16 12 3,325 .039 — .133 — .067 13,082
H-1200 31⁄412 5,291 .030 — .133 — .067 16,277
A-1400 15⁄814 1,216 .056 — .133 — .067 7,058
B-1400 13⁄16 14 425 .110 — .133 258 .067 4,000
30" Beam or Column
A-1200 15⁄812 1,414 .089 — .167 — .083 9,419
B-1200 13⁄16 12 420 .164 — .167 266 .083 4,465
C-1200 13⁄812 1,034 .104 — 1.67 1,040 .083 8,060
E-1200 27⁄16 12 2,660 .063 — .167 — .083 12,640
H-1200 31⁄412 4,234 .046 — .167 — .083 15,698
A-1400 15⁄814 974 .088 — .167 — .083 6,753
B-1400 13⁄16 14 340 .172 — .167 165 .083 3,420
When no numbers are shown, use the maximum uniform load
Deflections are given in inches; loads in lbs.
tnb07_gm102_F_104_105 1/18/08 9:47 AM Page F-104
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
A-3
F-105
Table 3 — Double Channel (Single Channels Welded Back-to-Back)
MAXIMUM 1/180 1/360
CAT.
UNIFORM SPAN SPAN COL.
NO.
DEPTH GA. LOAD DEFL. LOAD DEFL. LOAD DEFL. LOAD
12" Beam or Column
A-1202 31⁄412 — .008 — .067 — .033 21,177
B-1202 15⁄812 3,016 .016 — .067 — .033 14,110
C-1202 23⁄412 — .010 — .067 — .033 18,990
E-1202 47⁄812 — .005 — .067 — .033 27,623
H-1202 61⁄212 — .004 — .067 — .033 34,210
A-1402 31⁄414 — .008 — .067 — .033 15,250
B-1402 15⁄814 2,300 .016 — .067 — .033 10,390
18" Beam or Column
A-1202 31⁄412 — .018 — .100 — .050 20,609
B-1202 15⁄812 2,011 .036 — .100 — .050 13,440
C-1202 23⁄412 4,811 .021 — .100 — .050 18,470
E-1202 47⁄812 — .013 — .100 — .050 16,926
H-1202 61⁄212 — .009 — .100 — .050 33,390
A-1402 31⁄414 — .018 — .100 — .050 14,867
B-1402 15⁄814 1,534 .036 — .100 — .050 9,910
24" Beam or Column
A-1202 31⁄412 4,858 .031 — .133 — .067 19,974
B-1202 15⁄812 1,509 .064 — .133 — .067 12,670
C-1202 23⁄412 3,609 .038 — .133 — .067 17,890
E-1202 47⁄812 — .021 — .133 — .067 26,143
H-1202 61⁄212 — .016 — .133 — .067 32,435
A-1402 31⁄414 3,425 .033 — .133 — .067 14,426
B-1402 15⁄814 1,150 .064 — .133 — .067 9,350
30" Beam or Column
A-1202 31⁄412 3,886 .049 — .167 — .083 19,261
B-1202 15⁄812 1,206 .100 — .167 — .083 11,803
C-1202 23⁄412 2,886 .059 — .167 — .083 17,230
E-1202 47⁄812 7,806 .034 — .167 — .083 25,259
H-1202 61⁄212 .025 — .167 — .083 31,395
A-1402 31⁄414 2,740 .050 — .167 — .083 13,937
B-1402 15⁄814 920 .100 — .167 — .083 8,730
When no numbers are shown, use the maximum uniform load
Deflections are given in inches; loads in lbs.
Design Data — Metal Framing Channel
tnb07_gm102_F_104_105 1/18/08 9:47 AM Page F-105
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
F-106
Design Data — Metal Framing Channel
Table 3 — Single Channel
MAXIMUM 1/180 1/360
CAT.
UNIFORM SPAN SPAN COL.
NO.
DEPTH GA. LOAD DEFL. LOAD DEFL. LOAD DEFL. LOAD
36" Beam or Column
A-1200 15⁄812 1,178 .129 — .200 917 .100 8,962
B-1200 13⁄16 12 350 .236 — .200 148 .100 3,498
C-1200 13⁄812 861 .149 — .200 578 .100 7,525
E-1200 27⁄16 12 2,216 .088 — .200 — .100 12,160
H-1200 31⁄412 3,528 .068 — .200 — .100 15,132
A-1400 15⁄814 811 .126 — .200 640 .100 6,416
B-1400 13⁄16 14 284 .248 — .200 115 .100 2,755
42" Beam or Column
A-1200 15⁄812 1,010 .175 — .233 674 .117 8,466
B-1200 13⁄16 12 300 .323 217 .233 109 .117 2,579
C-1200 13⁄812 738 .203 — .233 425 .117 6,945
E-1200 27⁄16 12 1,900 .120 — .233 — .117 11,698
H-1200 31⁄412 3,024 .091 — .233 — .117 14,514
A-1400 15⁄814 695 .160 — .233 470 .117 6,051
B-1400 13⁄16 14 243 .336 168 .233 84 .117 2,060
48" Beam or Column
A-1200 15⁄812 884 .228 — .267 516 .133 7,943
B-1200 13⁄16 12 263 .420 167 .267 83 .133 1,981
C-1200 13⁄812 646 .265 — .267 325 .133 6,325
E-1200 27⁄16 12 1,663 .156 — .267 — .133 11,092
H-1200 31⁄412 2,646 .120 — .267 — .133 13,850
A-1400 15⁄814 609 .120 — .267 360 .133 5,658
B-1400 13⁄16 14 213 .440 129 .267 64 .133 1,580
54" Beam or Column
A-1200 15⁄812 785 .289 — .300 408 .150 7,369
B-1200 13⁄16 12 234 .533 132 .300 66 .150 1,555
C-1200 13⁄812 574 .335 — .300 257 .150 5,650
E-1200 27⁄16 12 1,478 .198 — .300 1,123 .150 10,505
H-1200 31⁄412 2,351 .151 — .300 — .150 13,150
A-1400 15⁄814 541 .286 — .300 284 .150 5,241
B-1400 13⁄16 14 189 .556 102 .300 51 .150 1,250
When no numbers are shown, use the maximum uniform load.
Deflections are given in inches; loads in lbs.
tnb07_gm102_F_106_107 1/18/08 9:47 AM Page F-106
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
A-3
F-107
Table 3 — Double Channel (Single Channels Welded Back-to-Back)
MAXIMUM 1/180 1/360
CAT.
UNIFORM SPAN SPAN COL.
NO.
DEPTH GA. LOAD DEFL. LOAD DEFL. LOAD DEFL. LOAD
36" Beam or Column
A-1202 31⁄412 3,239 .071 — .200 — .100 18,470
B-1202 15⁄812 1,005 .144 — .200 702 .100 10,840
C-1202 23⁄412 2,400 .085 — .200 — .100 16,500
E-1202 47⁄812 6,505 .048 — .200 — .100 24,316
H-1202 61⁄212 .036 — .200 — .100 30,265
A-1402 31⁄414 2,284 .071 — .200 — .100 13,416
B-1402 15⁄814 766 .144 — .200 535 .100 8,050
42" Beam or Column
A-1202 31⁄412 2,776 .098 — .233 — .117 17,635
B-1202 15⁄812 863 .195 — .233 516 .117 9,790
C-1202 23⁄412 2,063 .115 — .233 — .117 15,730
E-1202 47⁄812 5,576 .065 — .233 — .117 23,272
H-1202 61⁄212 9,190 .049 — .233 — .117 29,025
A-1402 31⁄414 1,958 .225 — .233 — .117 12,832
B-1402 15⁄814 658 .195 — .233 393 .117 7,300
48" Beam or Column
A-1202 31⁄412 2,429 .128 — .267 — .133 16,730
B-1202 15⁄812 754 .255 — .267 395 .133 8,640
C-1202 23⁄412 1,804 .151 — .267 — .133 14,890
E-1202 47⁄812 4,879 .085 — .267 — .133 22,170
H-1202 61⁄212 8,041 .064 — .267 — .133 27,700
A-1402 31⁄414 1,713 .128 — .267 — .133 12,223
B-1402 15⁄814 575 .255 — .267 301 .133 6,480
54" Beam or Column
A-1202 31⁄412 2,159 .161 — .300 — .150 15,763
B-1202 15⁄812 670 .323 — .300 312 .150 7,405
C-1202 23⁄412 1,604 .190 — .300 1,263 .150 13,990
E-1202 47⁄812 4,338 .108 — .300 — .150 20,980
H-1202 61⁄212 7,149 .081 — .300 — .150 16,280
A-1402 31⁄414 1,523 .161 — .300 — .150 11,566
B-1402 15⁄814 511 .323 — .300 238 .150 5,580
When no numbers are shown, use the maximum uniform load.
Deflections are given in inches; loads in lbs.
Design Data — Metal Framing Channel
tnb07_gm102_F_106_107 1/18/08 9:47 AM Page F-107
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
F-108
Design Data — Metal Framing Channel
Table 3 — Single Channel
MAXIMUM 1/180 1/360
CAT.
UNIFORM SPAN SPAN COL.
NO.
DEPTH GA. LOAD DEFL. LOAD DEFL. LOAD DEFL. LOAD
60" Beam or Column
A-1200 15⁄812 706 .358 — .333 330 .167 6,762
B-1200 13⁄16 12 210 .658 107 .333 53 .167 —
C-1200 13⁄812 516 .414 — .333 208 .167 4,920
E-1200 27⁄16 12 1,330 .244 — .333 909 .167 9,874
H-1200 31⁄412 2,116 .186 — .333 — .167 12,406
A-1400 15⁄814 486 .353 — .333 231 .167 4,792
B-1400 13⁄16 14 170 .687 82 .333 41 .167 —
66" Beam or Column
A-1200 15⁄812 643 .432 — .367 273 .183 6,127
B-1200 13⁄16 12 191 .795 88 .367 44 .183 —
C-1200 13⁄812 470 .501 344 .367 172 .183 4,145
E-1200 27⁄16 12 1,210 .295 — .367 753 .183 9,211
H-1200 31⁄412 1,924 .226 — .367 — .183 11,616
A-1400 15⁄814 443 .426 — .367 190 .183 4,311
B-1400 13⁄16 14 155 .831 68 .367 35 .183 —
72" Beam or Column
A-1200 15⁄812 589 .514 459 .400 299 .200 5,436
B-1200 13⁄16 12 175 .946 74 .400 37 .200 —
C-1200 13⁄812 430 .595 289 .400 144 .200 3,485
E-1200 27⁄16 12 1,108 .351 — .400 632 .200 8,509
H-1200 31⁄412 1,839 .269 — .400 1,313 .200 10,782
A-1400 15⁄814 405 .506 320 .400 160 .200 3,809
B-1400 13⁄16 14 141 .989 57 .400 29 200 —
84" Beam or Column
A-1200 15⁄812 505 .700 337 .467 168 .233 4,061
B-1200 13⁄16 12 — — 54 .467 27 .233 —
C-1200 13⁄812 369 .811 212 .467 106 .233 2,565
E-1200 27⁄16 12 950 .479 — .467 464 .233 6,991
H-1200 31⁄412 1,513 .366 — .467 965 .233 8,988
A-1400 15⁄814 348 .691 235 .467 118 .233 2,827
B-1400 13⁄16 14 — — 42 .467 21 .233 —
When no numbers are shown, use the maximum uniform load
Deflections are given in inches; loads in lbs.
tnb07_gm102_F_108_109 1/18/08 9:45 AM Page F-108
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
A-3
F-109
Table 3 — Double Channel (Single Channels Welded Back-to-Back)
MAXIMUM 1/180 1/360
CAT.
UNIFORM SPAN SPAN COL.
NO.
DEPTH GA. LOAD DEFL. LOAD DEFL. LOAD DEFL. LOAD
60" Beam or Column
A-1202 31⁄412 1,944 .199 — .33 — .167 14,738
B-1202 15⁄812 604 .398 — .333 253 .167 6,100
C-1202 23⁄412 1,444 .235 — .333 1,023 .167 13,050
E-1202 47⁄812 3,904 .133 — .333 — .167 19,734
H-1202 61⁄212 6,434 .100 — .333 — .167 24,810
A-1402 31⁄414 1,370 .199 — .333 — .167 10,878
B-1402 15⁄814 460 .399 — .333 193 .167 4,640
66" Beam or Column
A-1202 31⁄412 1,766 .240 — .367 1,347 .183 13,646
B-1202 15⁄812 549 .481 418 .367 209 .183 5,055
C-1202 23⁄412 1,313 .285 — .367 846 .183 12,030
E-1202 47⁄812 3,549 .180 — .367 — .183 18,415
H-1202 61⁄212 5,849 .120 — .367 — .183 23,230
A-1402 31⁄414 1,245 .241 — .367 949 .183 10,133
B-1402 15⁄814 419 .483 318 .367 159 .183 3,840
72" Beam or Column
A-1202 31⁄412 1,620 .286 — .400 1,132 .200 12,500
B-1202 15⁄812 503 .574 351 .400 176 .200 4,230
C-1202 23⁄412 1,203 .339 — .400 710 .200 10,980
E-1202 47⁄812 3,253 .191 — .400 — .200 17,023
H-1202 61⁄212 5,361 .143 — .400 — .200 21,560
A-1402 31⁄414 1,141 .286 — .400 798 .200 9,340
B-1402 15⁄814 384 .574 267 .400 134 .200 3,220
84" Beam or Column
A-1202 31⁄412 1,388 .390 — .467 832 .233 9,992
B-1202 15⁄812 431 .780 258 .467 129 .233 3100
C-1202 23⁄412 1,031 .461 — .467 522 .233 8,670
E-1202 47⁄812 2,788 .260 — .467 — .233 13,993
H-1202 61⁄212 4,595 .195 — .467 — .233 17,975
A-1402 31⁄414 979 .390 — .467 586 .233 7,682
B-1402 15⁄814 329 .781 197 .467 98 .233 2,370
When no numbers are shown, use the maximum uniform load
Deflections are given in inches; loads in lbs.
Design Data — Metal Framing Channel
tnb07_gm102_F_108_109 1/18/08 9:45 AM Page F-109
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
F-110
Design Data — Metal Framing Channel
Table 3 — Single Channel
MAXIMUM 1/180 1/360
CAT.
UNIFORM SPAN SPAN COL.
NO.
DEPTH GA. LOAD DEFL. LOAD DEFL. LOAD DEFL. LOAD
96" Beam or Column
A-1200 15⁄812 441 .914 258 .533 129 .267 3,108
B-1200 13⁄16 12 — — 42 .533 21 .267 —
C-1200 13⁄812 323 1.059 163 .533 81 .267 1,960
E-1200 27⁄16 12 831 .730 — .533 355 .267 5,423
H-1200 31⁄412 1,323 .478 — .533 739 .267 7,059
A-1400 15⁄814 304 .903 180 .533 90 .267 2,615
B-1400 13⁄16 14 — — 32 .533 16 .267 —
108" Beam or Column
A-1200 15⁄812 393 1.156 204 .600 102 .300 2,456
B-1200 13⁄16 12 — — 33 .600 16 .300 —
C-1200 13⁄812 288 1.350 128 .600 64 .300 —
E-1200 27⁄16 12 739 .790 561 .600 281 .300 4,291
H-1200 31⁄412 1,176 .605 — .600 584 .300 5,579
A-1400 15⁄814 270 1.141 142 .600 71 .300 1,708
B-1400 13⁄16 14 — — 25 .600 13 .300 —
120" Beam or Column
A-1200 15⁄812 354 1.425 165 .667 83 .333 —
B-1200 13⁄16 12 — — 27 .667 13 .333 —
C-1200 13⁄812 259 1.663 104 .667 52 .333 —
E-1200 27⁄16 12 665 .976 455 .667 227 .333 3,478
H-1200 31⁄412 1,059 .746 — .667 473 .333 4,521
A-1400 15⁄814 244 1.413 114 .667 57 .333 —
B-1400 13⁄16 14 — — 21 .667 10 .33 —
144" Beam or Column
A-1200 15⁄812 — — 115 .800 57 .400 —
C-1200 13⁄812 — — 72 .800 36 .400 —
E-1200 27⁄16 12 554 1.400 315 .800 158 .400 —
H-1200 31⁄412 883 1.075 657 .800 328 .400 —
A-1400 15⁄814 — — 80 .800 40 .400 —
When no numbers are shown, use the maximum uniform load
Deflections are given in inches; loads in lbs.
tnb07_gm102_F_110_111 1/18/08 9:44 AM Page F-110
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
A-3
F-111
Table 3 — Double Channel (Single Channels Welded Back-to-Back)
MAXIMUM 1/180 1/360
CAT.
UNIFORM SPAN SPAN COL.
NO.
DEPTH GA. LOAD DEFL. LOAD DEFL. LOAD DEFL. LOAD
96" Beam or Column
A-1202 31⁄412 1,215 .509 — .533 637 .267 7,675
B-1202 15⁄812 378 1.019 197 .533 99 .267 —
C-1202 23⁄412 903 .603 — .533 400 .267 6,640
E-1202 47⁄812 2,440 .340 — .533 1,917 .267 10,875
H-1202 61⁄212 4,021 .255 — .533 — .267 14,120
A-1402 31⁄414 856 .509 — .533 449 .267 5,951
B-1402 15⁄814 288 1.020 150 .533 75 .267 —
108" Beam or Column
A-1202 31⁄412 1,080 .644 — .600 503 .300 6,071
B-1202 15⁄812 355 1,290 156 .600 78 .300 —
C-1202 23⁄412 801 .763 632 .600 316 .300 5,250
E-1202 47⁄812 2,169 .430 — .600 1,515 .300 8,599
H-1202 61⁄212 3,574 .323 — .600 — .300 11,160
A-1402 31⁄414 761 .644 — .600 355 .300 4,702
B-1402 15⁄814 255 1.290 119 .600 59 .300 —
120" Beam or Column
A-1202 31⁄412 971 .795 — .667 408 .333 —
B-1202 15⁄812 301 1.588 126 .667 63 .333 —
C-1202 23⁄412 721 .941 512 .667 256 .333 4,250
E-1202 47⁄812 1,951 .531 — .667 1,227 .333 6,946
H-1202 61⁄212 3,216 .398 — .667 — .333 9,040
A-1402 31⁄414 685 .796 — .667 287 .333 3,805
B-1402 15⁄814 230 1.600 96 .667 48 .333 —
144" Beam or Column
A-1202 31⁄412 810 1.145 566 .800 283 .400 —
B-1202 15⁄812 — — 88 .800 44 .400 —
C-1202 23⁄412 601 1.350 355 .800 178 .400 —
E-1202 47⁄812 1,626 .764 — .800 852 .400 —
H-1202 61⁄212 2,680 .573 — .800 1,873 .400 —
A-1402 31⁄414 571 1.146 399 .800 199 .400 —
B-1402 15⁄814 — — 67 .800 33 .400 —
When no numbers are shown, use the maximum uniform load
Deflections are given in inches; loads in lbs.
Design Data — Metal Framing Channel
tnb07_gm102_F_110_111 1/18/08 9:44 AM Page F-111
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
F-112
Design Data — Metal Framing Channel
Table 3 — Single Channel
MAXIMUM 1/180 1/360
CAT.
UNIFORM SPAN SPAN COL.
NO.
DEPTH GA. LOAD DEFL. LOAD DEFL. LOAD DEFL. LOAD
168" Beam or Column
A-1200 15⁄812 — — 84 .933 42 .467 —
C-1200 13⁄812 — — 53 .933 27 .467 —
E-1200 27⁄16 12 475 1.912 233 .933 116 .467 —
H-1200 31⁄412 756 1.463 482 .933 241 .467 —
A-1400 15⁄814 — — 60 .933 30 .467 —
192" Beam or Column
E-1200 27⁄16 12 — — 178 1.07 89 .533 —
H-1200 31⁄412 661 1.91 369 1.07 185 .533 —
216" Beam or Column
E-1200 27⁄16 12 — — 140 1.20 70 .600 —
H-1200 31⁄412 — — 292 1.20 146 .600 —
240" Beam or Column
E-1200 27⁄16 12 — — 114 .334 57 .667 —
H-1200 31⁄412 — — 236 .334 118 .667 —
When no numbers are shown, use the maximum uniform load
Deflections are given in inches; loads in lbs.
tnb07_gm102_F_112_113 1/18/08 9:46 AM Page F-112
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
A-3
F-113
Table 3 — Double Channel (Single Channels Welded Back-to-Back)
MAXIMUM 1/180 1/360
CAT.
UNIFORM SPAN SPAN COL.
NO.
DEPTH GA. LOAD DEFL. LOAD DEFL. LOAD DEFL. LOAD
168" Beam or Column
A-1202 31⁄412 694 1.563 916 .933 208 .467 —
B-1202 15⁄812 — — 64 .933 32 .467 —
C-1202 23⁄412 515 1.850 261 .933 130 .467 —
E-1202 47⁄812 1,394 1.040 1,255 .933 626 .467 —
H-1202 61⁄212 2,298 .780 — .933 1,326 .467 —
A-1402 31⁄414 489 1.563 293 .933 147 .467 —
B-1402 15⁄814 — — 49 .933 25 .467 —
192" Beam or Column
A-1202 31⁄412 — — 318 1.07 159 .533 —
——————————
C-1202 23⁄412 — — 200 1.07 100 .533 —
E-1202 47⁄812 1,220 1.363 958 1.07 479 .533 —
H-1202 61⁄212 2,010 1.019 — 1.07 1,053 .533 —
A-1402 31⁄414 — — 224 1.07 112 .533 —
——————————
216" Beam or Column
A-1202 31⁄412 — — 252 1.20 126 .600 —
——————————
C-1202 23⁄412 — — 158 1.20 79 .600 —
E-1202 47⁄812 1,084 1.725 757 1.20 379 .600 —
H-1202 61⁄212 1,788 1.288 — 1.20 832 .600 —
A-1402 31⁄414 — — 177 1.20 89 .600 —
——————————
240" Beam or Column
A-1202 31⁄412 — — 204 1.33 102 .667 —
——————————
C-1202 23⁄412 — — 128 1.33 64 .667 —
E-1202 47⁄812 — — 613 1.33 307 .667 —
H-1202 61⁄212 1,609 1.588 — 1.33 674 .667 —
A-1402 31⁄414 144 1.33 72 .667 —
——————————
When no numbers are shown, use the maximum uniform load
Deflections are given in inches; loads in lbs.
Design Data — Metal Framing Channel
tnb07_gm102_F_112_113 1/18/08 9:46 AM Page F-113
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
F-114
Design Data — Metal Framing Channel
RECOMMENDED
SECTION LOAD IN LBS.
A-1200 5,000
A-1400 3,500
B-1200 6,000
B-1400 3,400
C-1200 5,000
E-1200 5,000
H-1200 4,000
Safety factor of 2
1
⁄
2
Both ends
supported.
A-1200 1,500 lbs.
A-1400 1,000 lbs.
Both ends
supported.
A-1200 3,000 lbs.
A-1400 2,000 lbs.
Both ends
supported.
A-1200 2,000 lbs.
A-1400 1,500 lbs.
Both ends
supported.
A-1200 2,000 lbs.
A-1400 2,000 lbs.
Both ends
supported.
A-1200 1,000 lbs.
A-1400 650 lbs.
Both ends
supported.
A-1200 1,500 lbs.
A-1400 1,000 lbs.
Both ends
supported.
A-1200 1,000 lbs.
A-1400 800 lbs.
AB-202 AB-203
AB-200 1,500 lbs.
AB-203 700 lbs.AB-201 700 lbs.
AB-206
AB-213
AB-214
AB-205
AB-216 AB-204
AB-215
AB-202
RECOMMENDED
SECTION LOAD IN LBS.
A-1200 3,500
A-1400 2,500
B-1200 4,000
B-1400 2,600
C-1200 3,500
E-1200 3,500
H-1200 2,000
RECOMMENDED
SECTION LOAD IN LBS.
A-1200 8,000
A-1400 5,500
B-1200 9,000
B-1400 4,800
C-1200 8,000
E-1200 8,000
H-1200 5,500
Flat Plate Fittings
Table 4 — Safe Bearing Loads for 15⁄8" Channel and Combinations
Table 5 — Design Load Table for Typical Channel Connections
Safety factor of 21⁄2based on ultimate strength of the connection. Load diagrams indicate
up to three design loads, for 12 gauge, 14 gauge and 16 gauge channel applications.
90° Fittings (When used in position shown).
tnb07_gm102_F_114_115 1/18/08 9:46 AM Page F-114
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
A-3
F-115
Design Applications
Cantilever Beams
Simple Beams
Beams Fixed on One End, Supported at Other
Beams Fixed at Both Ends
tnb07_gm102_F_114_115 1/18/08 9:46 AM Page F-115
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
F-116
LOAD DEFLECTION
LOAD AND SUPPORT CONDITION FACTOR FACTOR
1. Simple Beam — Uniform Load 1.00 1.00
2. Simple Beam — Concentrated Load at Center .50 1.25
3. Simple Beam — Two Equal Concentrated Loads
at b Points 1.00 1.10
4. Beam Fixed at Both Ends — Uniform Load 1.50 .30
5. Beam fixed at Both Ends — Concentrated Load 1.00 .40
at Center
6. Cantilever Beam — Uniform Load .25 2.40
7. Cantilever Beam — Concentrated Load at End .12 3.20
8. Continuous Beam — Two Equal Spans — 1.30 .92
Uniform Load on One Span
9. Continuous Beam — Two Equal Spans 1.00 .42
10. Continuous Beam — Two Equal Spans — .62 .71
Concentrated Load at Center of One Span
11. Continuous Beam — Two Equal Spans — .67 .48
Concentrated Load at Center of Both Spans
Design Applications
Load tables on page F-53–F-59 for A, B, C, E and H series channel are for single span beams supported at the ends. These can be used in the majority
of cases. There are times when it is necessary to know what happens with other loading and support conditions. Some common arrangements are shown
in Table 6. Simply multiply the loads from the Design Load Tables times the factors given in Table 6. Examples shown on page F-117.
Span Span
Table 6 — Conversion Factors for Beams with Various Static Loading Conditions
tnb07_gm102_F_116_117 1/18/08 9:45 AM Page F-116
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
A-3
F-117
COLUMN LOADING
The load bearing capacity of column or compression members is a function of the inherent
configurational strength, the unbraced length and design of the end connections.
Values of axial column loading given in Table 3 were calculated using a rotationally free and
translation fixed correction at each end (see illustration I). This gives an end condition
constant (K) of 1.
If other end conditions are used, axial loading should be calculated using procedures in the
AISI specification for the design of cold formed steel structural members (SG671) and the
engineering values for Superstrut channel given in Table 1.
End Condition Code
Rotation fixed and translation fixed
Rotation free and translation fixed
Rotation fixed and translation free
EXAMPLE I
PROBLEM:
Determine the load and deflection of an A-1200 beam continuous
over one support and loaded uniformly on one span.
SOLUTION:
A. From load table 3 for A-1200 the load for a 5'0" span is 706 lbs. and deflection is .358".
B. Multiply by factors from Table 6.
Load = 706 lbs. x 1.30 = 917.8 lbs.
Deflection = .358 x .92 = .329"
Design Applications
EXAMPLE II
PROBLEM:
Determine load and deflection of an E-1200 cantilever beam with a concentrated load on the end.
SOLUTION:
A. From load table 3 for E-1200 the load for a 3'0" span is 2216 lbs. and deflection is .088".
B. Multiply by factors from Table 6.
Load = 2216 lbs. x .12 = 265.9 lbs.
Deflection = .088 x 3.20 = .282"
5"–0" 5"–0"
3"–0"
.65 .80 1.0
K Value
Column
Height
Illustration 1
tnb07_gm102_F_116_117 1/18/08 9:45 AM Page F-117
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
F-118
Table 9 — Maximum Spacing between Pipe Supports
Steel Pipe
Nom. Pipe Size (IN.) 1⁄23⁄411
1⁄222
1⁄233
1⁄2456 810121416182024
Max. Spacing (FT.) 5 6 7 9 10 11 12 13 14 16 17 19 22 23 25 27 28 30 32
Copper Size
Nom. Pipe Size (IN.) 1⁄23⁄411
1⁄411⁄222
1⁄233
1⁄24
Max. Spacing (FT.) 5 6 6 7 8 9 10 10 11 12
Table 10 — Minimum Spacing (In.) between Centers of Standard Pipe
When Using Superstrut #702 Pipe Straps
NOM. PIPE
SIZE 1⁄ 2 37⁄64 1 1-1⁄4 1-1⁄2 2 2-1⁄ 2 3 3-1⁄2 4 5 6 8
1⁄213⁄16 — — — — — — — — — ———
3⁄415⁄16 17⁄16 — — — — — — — — ———
11
1⁄215⁄813⁄4— — — — — — — ———
11⁄413⁄417⁄822
1⁄4— — — — — — ———
11⁄2115⁄16 21⁄16 23⁄16 27⁄16 29⁄16 — — — — — ———
22
3⁄16 25⁄16 21⁄223⁄427⁄831⁄8— — — — ———
21⁄227⁄16 29⁄16 23⁄433
1⁄831⁄835⁄8— — — ———
32
13⁄16 215⁄16 31⁄16 35⁄16 37⁄16 33⁄444
5⁄16 — — ———
31⁄231⁄831⁄431⁄835⁄833⁄441⁄16 45⁄16 45⁄8415⁄16 — ———
43
7⁄16 39⁄16 315⁄16 41⁄16 41⁄845⁄8415⁄16 51⁄459⁄16 — ———
64
3⁄447⁄855
1⁄451⁄851⁄857⁄863⁄16 61⁄263⁄16 77⁄16 81⁄8—
85
7⁄16 66
1⁄861⁄861⁄263⁄477
5⁄16 75⁄88 89⁄16 91⁄4101⁄8
Table 7 — Load Carrying Capacities
of Hot Rolled Steel Rod
DIMENSIONS (IN.) — LOADS
NOMINAL ROOT AREA
ROD DIA. THREAD
1⁄8.068
1⁄2.126
5⁄8.202
3⁄4.302
7⁄8.419
Safety factor of 5
Table 8 — Rod Size Determined
by Pipe Size for Fire Protection
DIMENSIONS (IN.) — LOADS
NOMINAL ROOT AREA
ROD DIA. THREAD
3⁄4to 2 1⁄8
21⁄2to 31⁄21⁄2
4 to 5 5⁄8
63⁄4
8 to 12 7⁄8
Safety factor of 5
Design Applications
tnb07_gm102_F_118_119 1/18/08 9:45 AM Page F-118
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
A-3
F-119
Design Applications
Table 11 — Standard Dimensions and Weights
of Piping Materials and Conduit
MECHANICAL (SCHEDULE 40)
NOMINAL
STD. PIPE PIPE COUPLING
SIZE O.D. O.D.
(IN.) (IN.) (IN.)
1⁄2.84 1.06
3⁄41.05 1.31
1 1.32 1.58
11⁄41.66 1.90
11⁄21.90 2.20
2 2.38 2.75
21⁄22.88 3.25
3 3.50 4.00
31⁄24.00 4.63
4 4.50 5.00
5 5.56 6.30
6 6.63 7.39
8 8.63 9.23
10 10.75 —
12 12.75 —
14 14.00 —
16 16.00 —
18 18.00 —
20 20.00 —
22 22.00 —
24 24.00 —
26 26.00 —
28 28.00 —
30 30.00 —
ELECTRICAL CONDUIT
RIGID STEEL THIN WALL (EMT)
NOMINAL CONDUIT CONDUIT
CONDUIT O.D. O.D.
SIZE (IN.) (IN.)
1⁄2.84 .71
3⁄41.05 .92
1 1.32 1.16
11⁄41.66 1.51
2 2.38 2.20
21⁄22.88 2.88
3 3.50 3.50
4 4.50 4.50
* Includes weight of heaviest conductor combination
tnb07_gm102_F_118_119 1/18/08 9:45 AM Page F-119
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
F-120
Table 12 — Extra Strong Pipe (Schedule 80)
A.S.A. B36.10 SCHEDULE NOMINAL
NOS. AND NOMINAL PIPE OUTSIDE WALL INSIDE
WALL THICKNESS SIZE DIAMETER THICKNESS DIAMETER
DESIGNATIONS (IN.) (IN.) (IN.) (IN.)
3⁄8.675 .126 .423
1⁄2.840 .147 .546
3⁄41.050 .154 .742
1 1.315 .179 .957
11⁄41.660 .191 1.278
EXTRA STRONG 11⁄21.900 .200 1.500
PIPE and 2 2.375 .218 1.939
SCHEDULE 80 PIPE 21⁄22.875 .276 2.323
(through 8") 3 3.500 .300 2.900
31⁄24.000 .318 3.364
4 4.500 .337 3.826
5 5.563 .375 4.813
6 6.625 .432 5.761
8 8.625 .500 7.625
10 10.750 .500 9.750
12 12.750 .500 11.750
14 OD 14.000 .500 13.000
EXTRA STRONG PIPE 16 OD 16.000 .500 15.000
(10" through 24" OD) 18 OD 18.000 .500 17.000
20 OD 20.000 .500 19.000
24 OD 24.000 .500 23.000
10 10.750 .593 9.564
12 12.750 .687 11.376
SCHEDULE 80 PIPE 14 OD 14.000 .750 12.500
(10" through 24" OD) 16 OD 16.000 .842 14.314
18 OD 18.000 .937 16.126
20 OD 20.000 1.031 17.938
24 OD 24.000 1.218 21.564
Table 13 — Pipe Covering Weights Thickness (Intended as Guide Only)
and Weight of Calcium Silicate Covering
NOMINAL 260° 360° 440° 525° 600° 700° 800°
PIPE THICK. THICK. THICK. THICK. THICK. THICK. THICK.
SIZE (IN.) (IN.) (IN.) (IN.) (IN.) (IN.) (IN.)
111111
1⁄211⁄211⁄2
11⁄411111
1⁄211⁄22
11⁄211111
1⁄211⁄22
21111
1⁄211⁄222
21⁄21111
1⁄211⁄222
1⁄2
31111
1⁄211⁄222
1⁄2
31⁄2111
1⁄211⁄2222
1⁄2
4111
1⁄211⁄2222
1⁄2
5111
1⁄211⁄2222
1⁄2
61
1⁄211⁄211⁄211⁄2222
1⁄2
81
1⁄211⁄211⁄211⁄2222
1⁄2
Design Applications
tnb07_gm102_F_120_121 1/18/08 9:44 AM Page F-120
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
A-3
F-121
Design Applications
Table 14 — Column Loading for Rack Construction
ALLOWABLE LOAD IN LBS. PER UPRIGHT
COLUMN
CAT.
NUMBER OF SHELVES PER UPRIGHT
HEIGHT
NO.
2345678910
A-1200 2,237 1,925 1,650 1,437 1,290 ————
6' A-1202 4,170 3,580 3,100 2,730 2,450 ————
B-1400 800820790700630————
B-1402 1,930 1,700 1,500 1,300 1,190 ————
A-1200 2,150 1,850 1,630 1,425 1,280 1,150 — — —
7' A-1202 4,000 3,525 3,000 2,700 2,430 2,200 — — —
B-1400 650 790 760 685 615 550 — — —
B-1402 1,800 1,650 1,450 1,300 1,180 750 — — —
A-1200 2,000 1,820 1,600 1,400 1,250 1,150 1,050 — —
8' A-1202 3,900 3,475 3,000 2,700 2,400 2,185 2,000 — —
B-1400 580 750 730 660 610 540 510 — —
B-1402 1,650 1,610 1,450 1,300 1,160 940 970 — —
A-1200 1,950 1,780 1,575 1,400 1,250 1,130 1,030 950 —
9' A-1202 3,800 3,400 3,020 2,675 2,400 2,180 1,975 1,800 —
B-1400 600 665 600 580 540 500 475 —
B-1402 1,500 1,500 1,430 1,275 1,160 1,000 900 800 —
A-1200 1,870 1,700 1,500 1,300 1,200 1,100 1,000 900 800
10' A-1202 3,600 3,300 3,000 2,650 2,350 2,000 1,975 1,800 1,650
B-1400 550 650 625 580 535 490 450 425
B-1402 1,450 1,480 1,400 1,250 1,140 1,040 960 885 825
•General Storage Racks
•Pallet Racks
•Barrel Racks
•Bulk Furniture Racks
•Cable Racks
•Bar Stock Racks
•Display Racks
•Special Purpose Racks
•For Uniform Loads on Horizontal
Members, See Table 3
Column height, equal
shelf spacing
Typical general storage rack for use with plywood or other decking
tnb07_gm102_F_120_121 1/18/08 9:44 AM Page F-121
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
F-122
F-112
Forged Steel Turnbuckle
Sizes
3
⁄
8
" through 1
1
⁄
2
" rod
Federal Type 13
SP69 Type 13
C-755 T / C-757 T
Center I-Beam Clamp
Federal Type 21
SP69 Type 21
452
Steel Concrete Insert
Federal Type 19
SP69 Type 18
CL-710
Light-Duty Clevis Hanger
Sizes
1
⁄
2
" through 4"
Federal Type 12
F-111
Forged Steel Clevis
Sizes
3
⁄
8
" through 1
1
⁄
2
" rod
Federal Type 14
SP69 Type 13
C-711
“J” Pipe Hanger
Sizes
1
⁄
2
" through 8" pipe
SP69 Type 5
M-777
Junior Top Beam C-Clamp
Sizes
3
⁄
8
" through
1
⁄
2
" rod
SP69 Type 18
M-778
Top Beam C-Clamp
Sizes
3
⁄
8
" through
3
⁄
4
" rod
SP69 Type 19
E-120-A
Forged Steel Weldless Eye Nut
Sizes
3
⁄
8
" through 1
1
⁄
2
" rod
Federal Type 17
SP69 Type 17
M-718 / MT-718
MI Split Pipe Ring
w/wo turnbuckle adj.
Sizes
1
⁄
2
" through 8" IPS
1
⁄
2
" through 4" tube
Federal Type 11
SP69 Type 12
M-775-L / C-775-L
MI or Steel C-Clamp
Sizes
3
⁄
8
" through
7
⁄
8
"
Federal Type 23
SP69 Type 23
M-117
MI Socket only for
S Split Ring Hanger
Sizes
3
⁄
8
" through
7
⁄
8
" Rod
Federal Type 16
SP69 Type 16
C-727 / CT-727
Adj. Swivel Ring Hanger
Sizes
1
⁄
2
" through 8" IPS
1
⁄
2
" through 4" tube
Federal Type 10
SP69 Type 10
H-115
U-Bolt
Sizes
1
⁄
2
" through 24" IPS
Federal Type 24
SP69 Type 24
C-710
Adj. Steel Clevis
Sizes
3
⁄
4
" through 20" IPS
Federal Type 1
SP69 Type 1
CF-710
Adj. Steel Band Hanger
Sizes
1
⁄
2
" through 8"
IPS
3
⁄
4
" through 4" tube
Federal Type 7
C-725
Steel Pipe Clamp
Sizes 1
1
⁄
2
" through 24" IPS
Federal Type 4
SP69 Type 4
C-720 / CT-720
Extension Pipe or Riser Clamp
Sizes
3
⁄
4
" through 20"
IPS
1
⁄
2
" through 6" tube
Federal Type 8
SP69 Type 8
C-726
Steel Double Bolt Pipe Clamp
Sizes 1
1
⁄
2
" through 24" IPS
Federal Type 3
SP69 Type 3
Federal Specifications (WW-H-171)/
Manufacturers Society Specifications (MSS SP69)
C-780
Welded attachment as
shown or inverted less bolt
Federal Type 22
SP69 Type 22
ARod
Size
"B"
Max. Dia.
tnb07_gm102_F_122_123 1/18/08 9:44 AM Page F-122
Metal Framing Engineering Data
Metal Framing, Pipe Hangers and Accessories
A-3
F-123
Federal Specifications (WW-H-171)/
Manufacturers Society Specifications (MSS SP69)
C-704-A
Offset J-Hook
Sizes
1
⁄
2
" through 3" IPS
Federal Type 27
C-786
Adj. Pipe Saddle Support
Sizes 2
1
⁄
2
" through 36" IPS
Federal Type 39
SP69 Type 38
C-729
Adj. Roller Hanger
Sizes 1" through 20" IPS
Federal Type 44
SP69 Type 43
RC-729A
Single Pipe Roll
Sizes 1" through 24" IPS
Federal Type 42
SP69 Type 41
C-785-A
Pipe Stanchion Saddle
Sizes 4" through 36" IPS
Federal Type 38
SP69 Type 37
S-730-C
Pipe Roll Complete
Federal Type 45
SP69 Type 44
C-789
Steel Pipe Covering
Protection Saddle
Sizes up to and including
10" IPS
Federal Type 40A
SP69 Type 39
C-739-M
Medium Welded Steel Bracket
Federal Type 33
SP69 Type 32
C-736
Light Welded Steel Bracket
Federal Type 32
SP69 Type 31
M-732 / M-732 Ext
I-Beam Clamp
w/Swing Nut
Sizes
3
⁄
8
" through
7
⁄
8
" Rod
Federal Type 30
SP69 Type 30
C-769
Top I-Beam Clamp
Sizes
3
⁄
4
" through
7
⁄
8
" Rod
Federal Type 53
SP69 Type 25
C-790
Insulation Protection Shield
for Vapor sealed pipe lines and
insulated copper tubing
Sizes
3
⁄
4
" through 12" IPS
Federal Type 41
SP69 Type 40
M-750
Side Beam Bracket
Sizes
3
⁄
8
" through
7
⁄
8
" Rod
Federal Type 35
SP69 Type 34
M-732-H
I-Beam w/Eye Nut
Federal w/o links Type 28
Federal w/links Type 29
SP69 Type 28
S-730-D
Adj. Pipe Roll & Base
Federal Type 47
SP69 Type 46
C-789
Steel Pipe Covering
Protection Saddle
Sizes 12" IPS and larger
Federal Type 40B
SP69 Type 39
C-739-H
Heavy Welded Steel Bracket
Max. Load 3,000 lbs.
Federal Type 34
SP69 Type 33
tnb07_gm102_F_122_123 1/18/08 9:44 AM Page F-123
Cobra®One-Piece
Cable and Pipe Clamp
•One-piece, heavy-duty
construction, ready to install
right out of the box, no need to
break apart and re-assemble,
no screws or bolts to drop
•Installs quickly and securely using
one hand
•Universal bolt head accepts a range of tools
•Eliminates the guesswork from clamp selection — one catalog
number attaches equal trade sizes of EMT and rigid conduit
•Parallel hook design keeps conduits and cable square with strut
•Reconfigure wiring without complete disassembly
•Remove cables easily without disturbing neighboring clamps
Simple Product Selection, Solid Installation
•Clear markings on each clamp identify the catalog number,
min./max. outer cable diameters, EMT/Rigid trade sizes, CSA
and UL stamps
•One size clamp works on equal trade sizes for both EMT and
rigid conduit
•Works with all depths of strut — 13⁄16" to 31⁄4"
•Two hooks on the same side make the clamp easy to install and
keep conduits and cable square with strut
•Rugged stirrup and wide saddle design holds securely with no
damage to conduit or cable
•Suggested design load is 200 lbs. (1⁄2" to 2");
350 lbs. (21⁄2" to 4"). Safety factor 4:1 (safety factor = ratio of
ultimate load to the design load)
•Heavy-duty 5⁄16" hex bolt with multi-driver head (Robertson
square, Phillips cross-recess and slot) provides full range of
installation options. Virtually any tool will work!
•Bright zinc finish — clamps are electrogalvanized after
fabrication for additional durability
Takes a Bite Out of Your
Installation Time!
NEW!
NEW!
Accepts…
Multi-driver combination bolt head accepts
a wrench, screwdriver or nut driver.
Remove…
Remove cable or pipes easily without
disturbing neighboring clamps.
Attaches…
Attaches a full range of EMT, rigid conduit
and cable to strut channels.
See page F-40 for
ordering Information.
F-124
tnb07_gm102_F_124 1/18/08 9:43 AM Page F-124
