tnb07_gm102_F_intro 1/19/08 11:53 AM Page F-1 In This Section... Superstrut (R) Metal Framing, Pipe Hangers and Accessories Metal Framing Channels -- Overview .............................F-2-F-7 Threaded Products and Hardware..................................F-8-F-13 Fittings and Brackets ...................................................F-14-F-21 Concrete Inserts ..........................................................F-22-F-23 Beam Clamps ..............................................................F-24-F-32 Pipe Straps, Conduit Clamps and Hangers ...................F-33-F-84 Surface Raceway and Lighting Systems ......................F-85-F-89 Slotted Angle Metal Framing ....................................F-100-F-101 Metal Framing Engineering Data..............................F-102-F-123 United States Tel: 901.252.8000 Fax: 901.252.1354 Canada Tel: 450.347.5318 Fax: 450.347.1976 Customer Service Tel: 800.816.7809 Technical Services Tel: 888.862.3289 Metal Framing, Pipe Hangers and Accessories Special Metals .............................................................F-90-F-99 F-1 www.tnb.com tnb07_gm102_F_02_03 1/18/08 5:04 PM Page F-2 Metal Framing, Pipe Hangers and Accessories Metal Framing Channels -- Overview New Trivalent Galv-Krom(R) Finish Is RoHS Compliant Thomas & Betts is proud to introduce the new and improved Trivalent Galv-Krom(R) finish. Galv-Krom(R) finish is a combination of .5 mils electro-plated Zinc and a gold Trivalent Chromium finish. * Gold Trivalent Chromium Finish -- The new Galv-Krom(R) finish features a Trivalent Chromium formulation that provides all the features and protection of Hexavalent Chromium (CR VI) without the use of this chemical. Hexavalent Chromium is a substance that is restricted by some standards such as the European Union directive on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS). * RoHS Compliant -- One great feature for the new Trivalent Chromium formulation is RoHS compliance. Because Hexavalent Chromium is a substance that is restricted by RoHS, moving away from a Hexavalent formulation to the new Trivalent formulationwill make the performance of Galv-Krom(R) coating available to customers affected by RoHS and other standards like RoHS around the world. * Trivalent Galv-Krom(R) Finish Is OSHA Safe -- As mentioned previously, the Hexavalent formulation of the Galv-Krom(R) finish was safe with regard to the revised 2006 OSHA standard. This new Trivalent formulation of the Galv-Krom(R) finish does not contain any Hexavalent Chromium and therefore does not fall under the scope of the OSHA standard at all. As a result, the new Trivalent Galv-Krom(R) finish, just like the Hexavalent Galv-Krom(R) finish, is OSHA compliant. * ASTM B633 Specification -- The improved Galv-Krom(R) finish is applied in compliance with ASTM B633 coating, the same standard as used previously. This standard outlines electrodeposited coatings of zinc on steel. F-2 tnb07_gm102_F_02_03 1/18/08 5:04 PM Page F-3 Metal Framing Channels -- Overview Finishes GoldGalv(R) The standard GoldGalv(R) finish is made up of a multi-step electrogalvanizing and zinc dichromate process. The trivalent Chromium finish is applied over the zinc, producing a chemically bonded non-porous barrier for protection from moisture and air. The .5 mil electro-plated zinc and gold trivalent Chromium finish provide all of the features and protection of hexavalent Chromium without the use of the chemical. Copper Plated ("T" inserted as the second digit of the part number; Example: CTL-710-2) Plain steel proceeds through a series of rinse tanks to clean the material surface. Once cleaned, the fabricated part is etched by dipping into an acid pickle bath to prepare the surface for adhesion. Copper is electrically applied by submerging in a copper bath. To seal the finish, the product continues to a sealer tank and is then dried by forced hot air. Black (Suffix B) Urethane powder resins are applied electrostatically to the steel after fabrication. Once the material is completely covered with the powder-form urethane, it proceeds through a 400 baking process for ten minutes, creating a chemical bond. This results in a minimum of 1.5 mil thickness of urethane coating providing excellent resistance to chipping or peeling. A black finish is raw steel with only a light oil finish as supplied by the steel manufacturer. There is no protection against red rust. Pregalvanized (Suffix PG) A zinc coating is applied by hot-dipping the steel coil at the mill prior to fabrication. Once the material is worked by roll-forming, cutting or punching, minimal protection is provided for raw edges. This weakness is typical with precoated material and affects the channel section around holes, extreme ends and the edges of the "U" shape lips. Superstrut pregalvanized material is in conformance with ASTM A-525/G-90 specification standards, representing 0.90 ounces of zinc per square foot of steel. This finish is often referred to as "hot-dipped mill galvanized" or "mill galvanized." Hot-Dipped Galvanized (Suffix HDG) The material is zinc coated after fabrication providing total product protection on all surfaces. The fabricated channel or fitting is suspended and then dipped into tanks of hot zinc for a prolonged period, creating a coherent bond. The result is superior corrosion resistance as compared to pregalvanized material. Hot-dipped galvanizing is not recommended for threaded products, considering the zinc coating thickness will often disrupt the threads. Superstrut hot-dipped galvanized is in conformance with ASTM Specifications A-123 (formerly A-386) and A-153. Superstrut channels maintain a minimum 1.5 ounces of zinc per square foot of steel or 2.5 mils (ASTM A-123, Thickness Grade 65). This finish is also referred to as "hot-dipped galvanized after fabrication." SilverGalv(R) (Suffix EG) Stainless Steel (Suffix SS) Superstrut channel is supplied in type 304 stainless steel when required. Type 316 stainless steel may be available upon request. Aluminum (Suffix AL) Superstrut channel and hardware are available in aluminum. Warning: Load tables, charts, and design criteria provided in this catalog are intended as guides only. Selection of proper product, installation intervals, erection, and placement are the responsibility of the user. Superstrut(R) products are intended to be used for the support and bracing of fixtures, cable, pipe and conduit. Improper use or installation may result in injury to persons or damage of property. We reserve the right to change material and finish specifications without notice. Metal Framing, Pipe Hangers and Accessories Green or White Urethane Powder Coated (Suffix GR or WH) Often referred to as "zinc plated" or "electroplated zinc," the steel and .5 mils of zinc are bonded by an electrolysis process. This is the identical process used in the Kindorf Galv-Krom(R) finish without the numerous benefits of the gold colored trivalent chromium conversion coat (see Galv-Krom(R) finish for more information). Electrogalvanizing is most commonly applied to small fittings, hardware and threaded products. PVC Coated (Suffix PVC) A polyvinyl chloride (PVC) plastic coating is fused to the channel, fitting or accessory after fabrication by immersing the part in fluidized PVC tanks. The fused-melt mixed powder PVC coating thickness is15 mils (.015") plus or minus five mils. PVC material is a thermoplastic and will soften in high temperature. An inherent weakness with PVC coatings occurs when field alterations are applied, such as cutting or drilling. These acts disrupt the sealed PVC product and warrant field touch-up. Thomas & Betts cannot be held responsible for field-altered PVC coated products. A-3 F-3 tnb07_gm102_F_04_05 1/18/08 9:35 AM Page F-4 Metal Framing Channels -- Overview Finishes (continued) Metal Framing, Pipe Hangers and Accessories GoldGalv (R) F-4 The standard GoldGalv(R) finish is made up of a multi-step electrogalvanizing and zinc dichromate process. The trivalent Chromium finish is applied over the zinc, producing a chemically bonded non-porous barrier for protection from moisture and air. The .5 mil electro-plated zinc and gold trivalent Chromium finish provide all of the features and protection of hexavalent Chromium without the use of the chemical. (Refer to page E-5 for more details). Formed Hot Rolled Steel Electro Plated Zinc Coating Yellow Dichromate Conversion Coat "Soak Degreasing" "Electro Cleaner" "Rinse" "Sulfuric Acid Bath" Chemical solution removes bulk of oil and grease buildup. The metal is negatively charged to remove minute surface particles. Live, clear water rinse. Prepares the metal by etching the surface for the zinc application. "Rinse" "Zinc Tank" "Rinse" "Rinse" Live, clear water rinse. Electrically applies the zinc metal coating. Chemically treated rinse water. Live, clear water rinse. "Rinse" "Chromate Dip" "Rinse" "Dryer" Live, clear water rinse. A yellow dichromate conversion coat is applied to the zinc. Live, clear water rinse. Hot air is forced around strut until dry. tnb07_gm102_F_04_05 1/18/08 9:35 AM Page F-5 Metal Framing Channels -- Overview Finishes (continued) SilverGalvTM Electro-Galvanized Finish From Superstrut(R) Protection is the name of the game and SilverGalvTM delivers a winning combination of features designed to meet the most exacting specifications. SilverGalvTM offers the ultimate in corrosion protection versatility and performance, including... * Strong Abrasion Resistance * Punched Holes and Cut Ends are Protected Unlike a pre-galvanized finish where steel holes and cuts have no corrosion protection, Silver-GalvTM protects every portion of the strut. Because SilverGalv's finish is applied after fabrication, all punched holes and cut ends share a consistent quality with the rest of the material Metal Framing, Pipe Hangers and Accessories SilverGalvTM provides strong abrasion resistance, even under extreme conditions, thanks to its unique zinc finish and chromate barrier. The green paint finishes typically used for strut cannot compare to this level of protection * Clean Finish SilverGalvTM ensures a finished product that leaves no residue on your hands. In the SilverGalvTM process, a zinc finish is applied after fabrication. As a result, all the oil and grime that accumulates during manufacturing gets thoroughly cleaned off during the plating process ASTM B117 Salt Spray Test Results 600 * Paintable Surface Applying SilverGalvTM after fabrication provides the end user with a clean, smooth surface to paint Salt Spray Hours 500 SilverGalv's silver hue means it can be used interchangeably with either standard pre-galvanized channel systems or silver colored fittings commonly used with green painted strut systems 400 300 100 With pre-galvanized strut, white rust frequently taints the zinc finish. With SilverGalvTM, this problem is eliminated thanks to a clear chromate applied over the zinc that stops white rust from forming 0 Green Painted * No More White Rust Pre-Galvanized 200 SilverGalvTM * Interchangeable Silver Color SilverGalv provides more corrosion protection than Pre-Galvanized or Green Painted finishes. TM Standard Channels Material Channels are cold formed from hot rolled pickled and oiled strip steel. Material Thickness All Series 1200 12 gauge material All Series 1400 14 gauge material Standard Lengths Standard lengths for channel are 10 ft. and 20 ft. 1 58 7 8 Standard length tolerance 18". Shorter lengths are available at a small cutting charge. GoldGalv(R) hardware finish is standard for all Superstrut products. This is a multi-process finish of electro-plated zinc, followed by gold colored zinc dichromate to give excellent corrosion resistance and superior paint base. See page F-3 for a complete description of the GoldGalv(R) hardware finish. GoldGalv(R) hardware will be furnished if no other finish is specified. 1 58 7 8 1 58 7 8 1 58 A Series 1 58 7 8 1 58 7 8 3 14 1 8 16 13 B Series 2 716 3 C Series E Series H Series A-3 F-5 tnb07_gm102_F_06_07 1/18/08 9:36 AM Page F-6 Metal Framing Channels -- Overview 158 7 8 Metal Framing, Pipe Hangers and Accessories 9 3 1 58 7 8 1 58 7 8 1 58 32 9 9 32 1 38 13 16 12 ga A-1200 B-1200 C-1200 Channel available in Solid, Half Slot, Punched, Slotted and Knockout configurations. Wt./Ft. 1.90 lbs. Channel available in Solid, Half Slot, Punched and Slotted configurations. Wt./Ft. 1.28 lbs. Channel available in Solid, Half Slot and Punched configurations. Wt./Ft. 1.70 lbs. 1 58 7 8 9 1 58 7 8 32 9 32 1 58 7 8 32 9 1 58 12 ga 12 ga E-1200 H-1200 A-1400 Channel available in Solid, Half Slot and Punched configurations. Wt./Ft. 2.47 lbs. Channel available in Solid, Half Slot and Punched configurations. Wt./Ft. 3.05 lbs. Channel available in Solid, Half Slot, Punched, Slotted and Knockout configurations. Wt./Ft. 1.40 lbs. 32 9 1 58 7 8 16 13 B-1400 Channel available in Solid, Half Slot, Punched and Slotted configurations. Wt./Ft. 0.90 lbs. F-6 8 32 tnb07_gm102_F_06_07 1/18/08 9:37 AM Page F-7 Metal Framing Channels Hole Configurations Superstrut Channels -- Welding Combinations 2" Half Slot Channel All Superstrut Channels are available in a variety of combinations -- some are shown here. DIM. GA. STD. CTN. 15 8 x 15 8 15 8 x 13 16 15 8 x 13 8 15 8 x 27 16 15 8 x 31 4 15 8 x 15 8 15 8 x 13 16 12 12 12 12 12 14 14 * * 500 500 * * 500 16" x 1 1 8" slots on 2" centers. 9 2* 2-A 2-B * Standard lengths 10 ft. and 20 ft. for standard cartons. Please consult your local T&B representative. Slotted Channel 4" 2-C 3-A 3-B CAT. NO. A-1200-S B-1200-S A-1400-S B-1400-S DIM. GA. STD. CTN. 15 8 x 15 8 15 8 x 13 16 15 8 x 15 8 15 8 x 13 16 12 12 14 14 * * * * 16" x 3" slots on 4" centers. 7 * Standard lengths 10 ft. and 20 ft. for standard carton. Please consult your local T&B representative. Punched Channel 1 78" 3-C 3-D 4 How to Order 10 and 20 ft. lengths -- steel. Special lengths may be ordered. Replace the 3 last digits of the regular channel catalog number with the designation of the desired combination. CAT. NO. A-1200-P B-1200-P H-1200-P A-1400-P B-1400-P 9 DIM. GA. STD. CTN. 15 8 x 15 8 15 8 x 13 16 15 8 x 13 16 15 8 x 11 2 15 8 x 13 16 12 12 12 14 14 500 500 500 500 500 16" holes on 178" centers. EXAMPLES: Available in 10 & 20 ft. lengths. Two A-1200 channels back to back are ordered as A-1202. Two A-1200 channels back to side are ordered as A-1202-C. Channel with Knockouts Specify desired finish or material. *"A" and "B" Series back-to-back combinations are joined using Thomas & Betts' steel rivet joining process. The riveted channel is offered in standard GoldGalv(R), stainless steel, painted, pre-galvanized and hot-dip galvanized finishes. Metal Framing, Pipe Hangers and Accessories CAT. NO. A-1200-HS B-1200-HS C-1200-HS E-1200-HS H-1200-HS A-1400-HS B-1400-HS Multiple channels are spot welded on 3" centers. 6" CAT. NO. A-1200-KO A-1400-KO DIM. GA. STD. CTN. 15 8 x 15 8 15 8 x 15 8 12 14 * * KO for 12" conduit. Please consult your local T&B representative. Standard Finish - GoldGalv(R) brand. A-3 F-7 tnb07_gm102_F_08_09 1/18/08 4:25 PM Page F-8 Threaded Products & Hardware NEW! Metal Framing, Pipe Hangers and Accessories TrapnutTM Strut Fastener Features and Benefits The unique scissor action of the TrapnutTM Strut Fastener closes at any desired position on the threaded rod. Once closed, precision threads trap the threaded rod for a sturdy hold that can be adjusted up or down for fine-tune positioning. While the versatile TrapnutTM has a locking pin that holds it in the desired position, it can also be removed and reused. Unlike a hex nut, there is no need to thread the TrapnutTM from either end of the rod, saving valuable time on the job. While the TrapnutTM Strut Fastener is a timesaver for new construction, it is invaluable for retro-fit applications. Rather than disassembling an existing trapeze to run additional conduit above it, the TrapnutTM fastener can be clamped between the existing trapeze and the beam clamp for a speedy retro-fit solution. It's ideal for applications where the rod ends are not accessible. Standard method using nuts and washers. The TrapnutTM fastener has a sturdy steel construction that is load bearing, so you can be confident of a solid installation. And, the TrapnutTM fastener functions as a hex nut, square washer and flat washer combined, so there are fewer parts to keep up with on the job. Easy to Install 1 H 122 38 Trapnut TM Strut Fastener Galv-Krom (R) CAT. NO. H 122 1/4 H 122 3/8 H 122 1/2 H 122 1/4 EG H 122 3/8 EG H 122 1/2 EG H 122 1/4 SS6 H 122 3/8 SS6 H 122 1/2 SS6 DESCRIPTION 4" Galv-Krom 8" Galv-Krom(R) 1 2" Galv-Krom(R) 1 4" SilverGalv(R) 3 8" SilverGalv(R) 1 2" SilverGalv(R) 1 4" Type 316 Stainless Steel 3 8" Type 316 Stainless Steel 1 2" Type 316 Stainless Steel 1 3 (R) DESIGN LOAD LBS. STD. CTN. 4" 8" 1 2" 1 4" 3 8" 1 2" 1 4" 3 8" 1 2" 150 590 1,080 150 590 1,080 150 590 1,080 50 50 50 50 50 50 50 50 50 1 3 Insert the bottom plate on the rod and close the top plate. * Precision threads trap the threaded rod for a sturdy hold that can be adjusted up or down for fine-tune positioning H 122 38 EG TrapnutTM Strut Fastener SilverGalvTM SIZE * No need to thread the TrapnutTM fastener from either end of the rod -- saving valuable time * Perfect for retro-fit applications where the rod ends are not accessible 2 New method using Trapnut TM Strut Fastener. Hold in the open position. * Functions as a hex nut, square washer, and flat washer combined 3 Press the pin with pliers. * Locking pin holds it in the desired position * Can be removed and reused 4 Tighten to the desired position with pliers. * Can be adjusted up or down for finetune positioning * Sturdy steel construction that is load bearing * Sized to provide custom fit for either 158" or 112" strut systems F-8 tnb07_gm102_F_08_09 1/18/08 4:25 PM Page F-9 Threaded Products & Hardware Square Washer CAT. NO. BOLT SIZE STD. CTN. CAT. NO. 4 16 3 8 1 2 5 8 3 4 100 100 100 100 100 50 AB-241L-1/4 AB-241L-5/16 AB-241L-3/8 AB-241L-1/2 AB-241L-5/8 AB-241-1/4 AB-241-5/16 AB-241-3/8 AB-241-1/2 AB-241-5/8 AB-241-3/4 AB-241 1 5 AB-241L BOLT SIZE STD. CTN. 4 16 3 8 3 8 5 8 100 100 100 100 100 1 5 15 8" 312" 45 B CAT. NO. 3" 15 8" AB239 1 AB-239-2 AB-239-3 1116" 2 2" 1 A 2 516" AB-239 AB225 A B STD. CTN. 7 1316 13 34 19 34 8 12 17 25 12 15 10 10 Standard Finish - GoldGalv(R), unless otherwise stated. 1116" AB227 Flat Plate Fittings 3 1 2" 5 8" AB206 3 12" 9 18" 3 7 4" 1 3 12" 3 12" X207 AB207 5 38" X208 AB220 AB219 5 38" 5 38" 5 38" 3 5 8" 7" AB-242 For use with either 3 8" or 1 2" hanger rod AB240 3 12" AB253 5 38" 5 38" 5 8" AB263 5 38" 5 38" 3 12" AB255 AB257 AB261 . . . . . . Standard Dimensions . . . . . . 3 12" 3 3 12" Metal Framing, Pipe Hangers and Accessories Angular Fittings 45 Located Square Washer NEW! * * * * * Hole Spacing: 13 16" from End Hole Spacing: 17 8" Centers Hole Size: 9 16" Diam. Material: 15 8" Width Material: 1 4" Thick AB265 Standard Finish - GoldGalv(R), unless otherwise stated. A-3 F-9 tnb07_gm102_F_10_11 1/18/08 4:27 PM Page F-10 Threaded Products & Hardware Channel Nuts UC-100 Universal Cone Nut Metal Framing, Pipe Hangers and Accessories Superstrut channel nuts are manufactured from mild steel and are case hardened. F-10 Design Data Superstrut self aligning channel nuts are designed to provide resistance to pull out and resistance to side slip in excess of the full strength of the channels with which they are used. The extreme resistance to side slip results from the unique design of the alternate teeth, spaced and designed to develop a wedging action that increases with pressure or load. Load Ratings for 14", 38" and 12" Strut Nuts used in Superstrut CHANNEL NUT SIZES 4" 3 8" 1 2" 1 SLIP TEST RATING PULL TEST RATING 300 750 1,200 500 1,000 2,000 If connections will be subjected to dynamic or seismic loading conditions, contact the factory for design assistance. 1. All ratings have safety factor of 3 applied. 2. Load ratings are for Static Applications. Eliminates the inventory and installation hassles of conventional spring nuts. Fits all 158" channel, regardless of depth, with a simple twist of your thumb. Pliable nylon cone secures the nut in place through the entire range of construction site temperatures. Screw Threads THREAD SIZE THREADS PER INCH DESIGN TORQUE (FT.-LBS.) 4 20 6 1 5 8 18 11 3 8 16 19 1 2 13 50 Standard Finish - GoldGalv(R), unless otherwise stated. All threaded products are American Standard thread, free fit class 2. GoldGalv(R) hardware finish is standard for all Superstrut products. This is a multi-process finish of electro-plated zinc, followed by gold colored zinc dichromate to give excellent corrosion resistance and a superior paint base. See pages F-3-F-4 for a complete description of the GoldGalv(R) hardware finish. Note: Standard Spring and Springless Nuts are supplied with a silver electro-galvanized (EG) finish. These items are not visible in a gold system and are universal with other systems' finishes and colorations. tnb07_gm102_F_10_11 1/18/08 4:27 PM Page F-11 Threaded Products & Hardware Nuts & Bolts A-100 Regular Spring Nut E-142 Hex Head Cap Screw E-150-S Lag Bolt Screw Sizes: 1 4", 5 16", 3 8", 1 2", 5 8", 3 4" & 7 8" Sizes: 1 4" x 1", 1 4" x 11 2", 3 8" x 1", 3 8" x 11 2", 1 2" x 15 16" & 1 2" x 11 2" Size: 3 8" & 1 2" Nut is square over 12" size. See price sheet for additional sizes. AB-100 Springless Nut E-145 Standard Hex Nut Sizes: 1 4", 5 16", 3 8", 1 2", 5 8" & 3 4" Sizes: 1 4", 3 8", 1 2", 5 8", 3 4", 7 8" & 1" E-151-D Wood Screw Drive Size A: 1 4" Size B: 2" GoldGalv Finish. Max. Rec. Load: 100 lbs. E-146 Standard Square Nut ES-142 Seismic Stiffner Nut (R) A Nut is square over 1 2" size. For use with all channels. Silver Electroplated Finish. Sizes: 1 4", 5 16", 3 8", 1 2" & 5 8" AC-100 Springless Nut GoldGalv(R) Finish. Bolt Dia.: 1 2" Sizes: 1 4", 3 8", 1 2", 5 8"& 3 4" E-147 Flat Steel Washer Nut is square over 1 2" size. Sizes: 1 4", 5 16", 3 8", 1 2", 5 8", 3 4" & 7 8" For all "A", "C", "E" and "H" series channel and inserts. Size: ES-142-1 2 x 11 2" GoldGalv(R) Finish. ES-145 Swivel Nut and Jam Nut Combinations Sizes: 3 8" & 1 2" B-100 Short Spring Nut Sizes: 1 4", 5 16", 3 8" & 1 2" Nut is square over 12" size. For all "B" series channel and inserts. CM-100 Nylon Cone Nut Sizes: 1 4", 3 8", * 1 2" & **100B 1 2" E-148 Lock Washer GoldGalv(R) Finish. Sizes: 1 4", 3 8", 1 2" & 5 8" GoldGalv(R) Finish. E-149 Slotted Hex Indented Head Machine Screw Sizes: 1 4" x 3 4", 1 4" x 1", 5 16" x 11 4" & 3 8" x 11 4" H-100 Long Spring Nut Sizes: 3 8", 1 2" & 5 8" Nut is square over 1 2" size. For all "E" and "H" series channel and inserts. B Metal Framing, Pipe Hangers and Accessories For all "A" and "C" series channel and inserts. Drill Size: 1 4" & 111 32" UC-100 Universal Nylon Cone Nut For all 158" channel. *Will not fit "B" series channel. Sizes: 1 4",3 8" & 1 2" **For "B" Series channel. GoldGalv(R) Finish. For all 15 8" & 11 2" channels. May be used with ALL strut depths. Can be used for CM-100, A-100, B-100, & AB-100 Series. GoldGalv(R) Finish. A-3 F-11 tnb07_gm102_F_12_13 1/18/08 4:25 PM Page F-12 Threaded Products & Hardware Nuts & Bolts (continued) Metal Framing, Pipe Hangers and Accessories Fender Washer CAT. NO. EF-147 EF147 1/4 EF-147-3/8 EF-147-1/2 Regular Spring Stud Nut SIZE DIA. 4 8 1 4 11 4 11 2 2 1 3 HOLE STD. STD. CTN. CAT. NO. 16 16 9 16 100 100 100 A182 1/4 1 A-182-1/4 X 1-1/4 A-184-3/8 X 1 A-184-3/8 X 1-1/4 A-185-1/2 X 1 A-185-1/2 X 1-1/4 5 7 A-182 to A-185 Springless Stud Nut A A-177 to A-180 CAT. NO. LENGTH A STD. CTN. 4 4 3 8 3 8 1 2 1 2 1 11 4 1 11 4 1 11 4 250 250 50 50 50 50 1 1 4 4 3 8 3 8 1 2 1 2 1 11 4 1 11 4 1 11 4 1 1 STD. CTN. 50 250 250 50 250 250 * Cannot be used with "B" Series channel. Standard Finish - GoldGalv(R), unless otherwise stated. Swivel Eye Swivel Joint CAT. NO. B A E120 3/8 E120 1/2 A 13 8 11 2 B DESIGN LOAD LBS. STD. CTN. 8 2 1,000 1,800 25 25 3 1 E-120 B A E-130 B A A CAT. NO. E122 3/8 E-122-1/2 A 13 8 11 2 B DESIGN LOAD LBS. STD. CTN. 8 2 1,000 1,800 25 10 B DESIGN LOAD LBS. STD. CTN. 8 2 1,000 1,800 25 10 3 1 E-122 Swivel Joint with Stud Swivel Eye with Stud F-12 LENGTH A For all "A" and "C" series channels. BOLT DIA. A177 1/4 1 A-177-1/4 X 1-1/4 A-179-3/8 X 1 A-179-3/8 X 1-1/4 A-180-1/2 X 1* A-180-1/2 X 1-1/4* BOLT DIA. CAT. NO. E130 3/8 E-130-1/2 A 13 8 11 2 B DESIGN LOAD LBS. STD. CTN. 8 2 1,000 1,800 25 25 3 1 B A A CAT. NO. E131 3/8 E-131-1/2 A 13 8 11 2 3 1 Standard Finish - GoldGalv(R), unless otherwise stated. E-131 tnb07_gm102_F_12_13 1/18/08 4:25 PM Page F-13 Threaded Products & Hardware Threaded Rod E-151 -- Coach Screw Rod H-104 -- Hanger Rod: Continuous Thread E-151 CAT. NO. Black available upon request. Machine Threaded opposite end, carbon steel. CAT. NO. E-151-3/8 E-151-1/2 ROD SIZE STANDARD ROD LENGTHS STD. CTN. 8 2 4, 6, 8, 10, 12 4, 6, 8, 10, 100 100 3 1 4 8 1 2 5 8 3 4 7 8 1 20 Series Rod H-104 1 16 13 11 10 9 8 3 DESIGN LOAD LBS. STD. CTN. 150 610 1,130 1,810 2,710 3,770 4,960 * * * * * * * Black available upon request. *Standard lengths 6 ft., 10 ft. and 12 ft. Standard Finish - GoldGalv(R), unless otherwise stated. R-Series Continuous Thread Rod -- Galvanized Reducing Rod Coupling Standard Rod Coupling A A CAT. NO. R628-6 FT. R638-6 FT. R648-6 FT. R1028-10 FT. R1038-10 FT. R1048-10 FT. ROD SIZE 4-20 3 8-16 1 2-13 1 4-20 3 8-16 1 2-13 1 CAT. NO. DATA FOR PRESSURE PIPING ULTIMATE ROOT AREA NOMINAL MAX. SAFE STD. LOAD IN LBS. THREAD PIPE SIZE LOAD AT 450 CTN. 900 1,900 3,500 900 1,900 3,500 .027 .068 .126 .027 .068 .126 -- 3 4" to 2" 2 12" to 3 12" -- 3 4" to 2" 2 12" to 3 12" -- 610 1,130 -- 610 1,130 H-119-1/4 H-119-5/16 H-119-3/8 H-119-1/2 H-119-5/8 H-119-3/4 H-119-7/8 H-119-1 300 150 60 500 250 100 Load Ratings based on safely factor of three. ROD SIZE A STD. CTN. 4 16 3 8 1 2 5 8 3 4 7 8 1 8 8 1 1 8 1 1 4 2 1 8 2 1 4 2 1 2 2 1 4 50 50 50 50 50 50 50 50 1 5 7 7 CAT. NO. ROD SIZE H-119-1/4X3/8 1 4 to 3 8 H-119-3/8X1/2 38 to 12 H-119-1/2X5/8 1 2 to 58 H-119-5/8X3/4 58 to 3 4 H-119-3/4X7/8 3 4 to 7 8 Standard Finish - GoldGalv(R), unless otherwise stated. A STD. CTN. 11 2 114 11 4 11 2 13 4 50 50 50 50 50 Metal Framing, Pipe Hangers and Accessories H-104-1/4 H-104-3/8 H-104-1/2 H-104-5/8 H-104-3/4 H-104-7/8 H-104-1 Order by Prod. #, rod size and rod length. THREADS PER INCH SIZE Beam Clamps for Mounting Pipe and Conduit U-571, U-572 Conduit Clamp CAT. NO. U-571 U-571 U-571 U-572 U-572 U-572 U-572 A CONDUIT SIZE MAX. FLANGE THICKNESS DIM. A STD. CTN. 2 4 1 3 4 1 11 4 11 2 1 4 1 2 11 2 11 4 1 5 8 13 4 13 4 13 4 2 1 2 2 1 2 2 1 2 2 1 2 25 25 25 25 25 25 25 1 3 3 Standard Finish - GoldGalv(R) brand. U-571, U-572 For attaching 12" thru 112" conduit to beam, channel, angle or column. Secures conduit to the support parallel or at right angles to it. 16" set screw, 12 ga. material. 5 A-3 F-13 tnb07_gm102_F_14_15 1/18/08 4:25 PM Page F-14 Fittings & Brackets Metal Framing, Pipe Hangers and Accessories Fittings & Brackets -- Series 200 Material Design Data Superstrut fittings and brackets are manufactured from hot rolled carbon steel. Ratings vary when used with 12 or 14 gauge channel and are shown for each channel material. Dimensions GoldGalv(R) hardware finish is standard for all Superstrut products. This is a multi-process finish of electro-plated zinc, followed by gold-colored zinc dichromate to give excellent corrosion resistance and a superior paint base. See page F-3 for complete description of the GoldGalv(R) hardware finish. GoldGalv(R) hardware will be furnished if no other finish is specified. The following standard dimensions apply to all fittings except as indicated on the individual drawings. * Hole spacing: 13 16" from end of fittings * Hole spacing: 17 8" centers * Hole size: 9 16" diameter Nuts and Bolts Required * Material: 15 8" wide Unless otherwise noted, nuts and bolts for use with fittings and brackets should be ordered separately. * Material: 1 4" thickness Application Instructions The standard bolt for the 9 16" hole is a 1 2" hex head cap screw 15 16" long. The 15 16" length may be used with all series channel. Parts drawings illustrate a typical use for the fitting, and in many cases other uses for the part are appropriate. Standard Finish - GoldGalv(R), unless otherwise stated. 15 8" 31 2" 21 4" 17 8" 2 1 4" 41 8" 2" AB204 AB203 AB202 AB201 31 2" 41 8" 4 8" 1 17 16" 31 2" 41 8" 31 2" AB214 AB213 AB205 31 2" 17 16" AB216 17 8" . . . . . . . . . . . . Standard Dimensions . . . . . . . . . . . . A AB252 F-14 * Hole Spacing: 13 16" From End * Hole Spacing: 17 8" Centers * Hole Size : 9 16" Diameter * Material: 15 8" Width * Material: 1 4" Thick Standard Finish - GoldGalv (R), unless otherwise stated. CAT. NO. A (IN.) STD. CTN. AB252 1 AB252 2 AB252 3 AB252 4 3 7 8 5 7 8 7 7 8 9 7 8 10 10 10 10 tnb07_gm102_F_14_15 1/18/08 4:25 PM Page F-15 Fittings & Brackets 17 16" 17 8" 4 1 8" 4 1 8" 1 16" 17 8" 7 3 1 2" 3 1 2" 2" 3 1 2" 2" 3 1 2" AB254 L 5 3 8" 5 3 8" 2" 214" 4 8" 1 4 8" 1 2" 158" 3 1 2" 3 1 2" AB274 AB284 R AB284 L AB299 3 3 4" 378" 17 8" 4 7 8" 1" 3 1 2" 334" 2 1 2" 2 1 2" 4" 1 16" 1 6 3 8" 5 8" 3 N205 13 8" X201 N-219 31 2" 2 5 8" 15 8" 17 8" X204 . . . . . . . . . . . . . . . Standard Dimensions . . . . . . . . . . . . . . . * Hole Spacing: 13 16" From End * Hole Spacing: 17 8" Centers * Hole Size : 9 16" Diameter 4 1 8" 11 2" Metal Framing, Pipe Hangers and Accessories 312" AB260 R AB260 L AB254 R * Material: 15 8" Width * Material: 1 4" Thick 11 2" 1 16" 5 X289 Standard Finish - GoldGalv (R), unless otherwise stated. X299 A-3 F-15 tnb07_gm102_F_16_17 1/18/08 9:38 AM Page F-16 Fittings & Brackets "Z" Shape Fittings 15 8" 13 1 16" Metal Framing, Pipe Hangers and Accessories 13 8" 11 16" 16" 1 11 16" 21 8" 21 8" A209 For attaching "A" series channel. 21 8" B209 For attaching "B" series channel. C209 For attaching "C" series channel. . . . . . . Standard Dimensions . . . . . . 3 1 4" * * * * * 2 7 16" 17 8" 17 8" CZ209 For attaching "A" back to back. Standard Finish - GoldGalv(R), unless otherwise stated. EZ209 For attaching "E" series channel. Wing Shape Fittings 5 7 8" 3 3 4" 3 7 8" Hole Spacing: 13 16" From End Hole Spacing: 17 8" Centers Hole Size: 1" Diameter Material: 15 8" Width Material: 1 4" Thick 3 7 8" 17 8" A218 AW205 L AW204 5 13 32" 5 3 3 4" 9 32" 17 8" 2" 17 8" 3 7 8" 3 7 8" 13 4" AW205-R AW214 15 8" AW224 121 32" 9 5 32" 3 3 4" 15 8" 121 32" AW226 15 8" . . . . . . Standard Dimensions . . . . . . * * * * * 3 7 8" 121 32" AW228 121 32" AW220 AW219 5 13 32" 2" 3 7 8" F-16 17 8" 15 8" 121 32" 15 8" 57 16" 17 8" 13 4" 121 32" 15 8" 15 8" 121 32" A217 2" Hole Spacing: 13 16" From End Hole Spacing: 17 8" Centers Hole Size: 1" Diameter Material: 15 8" Width Material: 1 4" Thick Standard Finish - GoldGalv(R), unless otherwise stated. tnb07_gm102_F_16_17 1/18/08 9:38 AM Page F-17 Fittings & Brackets "U" Shape Fittings 5c" 5 3 8" 5 3 8" 3 1 4" 7 4" 1 121 32" 3 5 3 8" 16" 121 32" 5 8" 11e" A210 For attaching "A" series channel A208 Does not include strut nut or bolts. For "A" series channel. A211 For attaching "A" series channel. 2 1 2" 7" 39 32" 11 16" 15 8" 1" 121 32" 3 9 32" 11 2" 10 ga. 4 8" 7 1 1 8" 4" 5 A212 AN211 AB245 13 8" 1 21 32" 3 111 32" 5 3 8" 121 32" 5 3 8" 13 8" 121 32" 32" AB-288 Standard Dimensions 2 7 16" * * * * * 4"-16 UNF Thread 3 4 1 2" 7 8" C210 For attaching "C" series channel. A-213 E210 For attaching "E" series channel. Hole Spacing: 13 16" From End Hole Spacing: 17 8" Centers Hole Size: 9 16" Diameter Material: 15 8" Width Material: 1 4" Thick Standard Finish - GoldGalv(R), unless otherwise stated. Angular Fittings 15 8" 312" 45 45 3" 1116" 2 2" AB239 1 AB-239-2 AB-239-3 15 8" 1 2 516" AB225 AB227 CAT. NO. B A 1116" A B STD. CTN. 7 1316 13 34 19 34 8 12 17 25 12 15 10 10 Metal Framing, Pipe Hangers and Accessories 5 3 8" 17 8" B210 Standard Finish - GoldGalv(R), unless otherwise stated. AB-239 A-3 F-17 tnb07_gm102_F_18_19 1/18/08 9:38 AM Page F-18 Fittings & Brackets Post Bases Metal Framing, Pipe Hangers and Accessories 4 Holes 3 4" Dia. 11116" 158" 4 Holes 4" Dia. 3 3 4" 1 312" 6" 4" Dia. 3 4" Dia. 3 312" 11116" 312" 3 1 2" 35 16" 6" 6" 414" 414" 6" 6" 6" AP232 AP-232FL AP-231FL AP235 AP-232SQ AP-235FL AP-231 AP-234 AP-234SQ AP-235SQ AP-231SQ AP-234FL 15 8" 31 2" 7 16" Dia. 5" 5 8" AP-206 AW-239 Standard Finish - GoldGalv(R), unless otherwise stated. F-18 4 1 4" 4 1 4" tnb07_gm102_F_18_19 1/18/08 9:38 AM Page F-19 Fittings & Brackets Special Application Fittings 4" 218" Q202 Q205 2 34" 3 8" 5 234" 358" 538" 2716" 3 2716" 5 8" 6" 6" 11316" Q255 For 2" standard pipe. Load 1,500 lbs. Q256 For 2" standard pipe. Load 1,500 lbs. 11316" Q253 Q254 For 11 4" standard pipe. Load 1,500 lbs. 312" Metal Framing, Pipe Hangers and Accessories 4" 218" . . . . . . . . . . . . . . . Standard Dimensions . . . . . . . . . . . . . . . * Hole Spacing: 1316" From End * Hole Spacing: 178" Centers * Hole Size: 916" Diameter Standard Finish - GoldGalv(R), unless otherwise stated. 16" Dia. 9 114" TR292 Frictionless needle bearings. Design load: 500 lbs. Safety factor of 5. * Material: 158" Width * Material: 14" Thick 16" Dia. 9 TR294 Frictionless needle bearings. Design load: 1,000 lbs. Safety factor of 5. A-3 F-19 tnb07_gm102_F_20_21 1/18/08 9:37 AM Page F-20 Fittings & Brackets Special Application Fittings (continued) 812" 438" Metal Framing, Pipe Hangers and Accessories 334" 16" 13 2" B 16" 13 4" A A 1" 4" 158" 158" 16" 13 C S205 Design Uniform Load/lbs. A-1200 650 A-1400 500 S204 Design Uniform Load/lbs. A-1200 650 A-1400 500 AN-270 2" 314" C 314" 334" 6" 16" Dia. 7 32" Dia. 1212" 318" B S-201-L and R R as shown -- L opposite hand. 12 ga. steel. Design Uniform Load/lbs. A-1,200 250 A-1,400 200 6" 1412" 318" 534" 158" 1316" 158" 9 S217 Design Uniform Load/lbs. A-1200 750 A-1400 650 S218 Design Uniform Load/lbs. A-1200 750 A-1400 650 16",1 Hole 9 16",1 Hole 9 334" 334" 218" 16", 2 Hole 7 158" 21 8" 16", 2 Hole 7 312" 1" 1" TS273 Track Support For uses over channel splice. Requires 3 8" x 21 2" bolt and nut (not included). Design load: 2,000 lbs. TS-272 Track Support Requires 3 8" x 21 2" bolt and nut (not included). Design load: 1,000 lbs. . . . . . . . . . . . . . . . Standard Dimensions . . . . . . . . . . . . . . . Standard Finish - GoldGalv(R), unless otherwise stated. * Hole Spacing: 1316" From End * Hole Spacing: 178" Centers * Hole Size: 916" Diameter F-20 1012" 618" CAT. NO. A B C STD. CTN. S201-L6 or R6 S201-L8 or R8 S201L 10 or R 10 S201-L12 or R12 S201-L14 or R14 S201-L16 or R16 S201-L18 or R18 S201-L20 or R20 6 8 10 12 14 16 18 20 1 1516 2 716 2 1516 3 716 3 1516 4 716 4 1516 5 716 3 5 7 3 4 5 6 7 25 25 5 5 5 15 5 10 CAT. NO. AN-270-1 AN-270-2 AN-270-3 AN-270-4 AN-270-5 * Material: 158" Width * Material: 14" Thick A B STD. CTN. 2 38 4 38 6 38 8 38 10 38 6 8 10 12 14 10 10 10 15 10 tnb07_gm102_F_20_21 1/18/08 9:38 AM Page F-21 Fittings & Brackets Brackets 1612" 514" 13 16" 318" 514" 318" 1i" 1812" 7b" 318" 2012" 734" 6" 1 16" 3 1 16" 3 6" 6" 1316" 158" 1 8" 158" 5 434 Metal Framing, Pipe Hangers and Accessories S236 Design Uniform Load/lbs. A-1,200 800 A-1,400 650 S226 Design Uniform Load/lbs. A-1200 1,000 A-1400 750 S222 Design Uniform Load/lbs. A-1,200 1,000 A-1,400 750 434" 712" 57 8" S248 Design Moment (channel upright as shown) When supported by A-1,200 10,800 inch lbs. A-1,400 7,550 inch lbs. Applies to fitting only, not to the arm. For A-1,200 A-1,400 A S247 Design Moment (channel upright as shown) When supported by A-1,200 5,250 inch lbs. A-1,400 3,650 inch lbs. Applies to fitting only, not to the arm. For A-1200 B-1202 A-1400 B-1402 A 3" 458" A 458" 614" S-250 May be installed inverted with no change in load ratings. Strut section made from half slot channel. Sizes: 6", 12" 18" & 24" 312" S-251 Strut section made from half slot channel. Sizes: 12", 18", 24", 30" & 36" CAT. NO. A DESIGN LOAD LBS. STD. CTN. S250 6 S-250-12 S-250-18 S-250-24 6 12 18 24 1,500 800 550 400 1 1 1 1 S-256 When installed in inverted position reduce load rating 40%. Strut section made from half slot channel. Sizes: 6", 12" 18" & 24" CAT. NO. A DESIGN LOAD LBS. STD. CTN. S-251-12 S-251-18 S-251-24 S-251-30 S-251-36 12 18 24 30 36 1,650 1,050 800 650 500 1 1 1 1 1 CAT. NO. A DESIGN LOAD LBS. STD. CTN. S256 6 S-256-12 S-256-18 S-256-24 6 12 18 24 1,000 500 300 250 1 1 1 1 Standard Finish GoldGalv(R), unless otherwise stated. A-3 F-21 tnb07_gm102_F_22_23 1/18/08 9:41 AM Page F-22 Concrete Inserts Concrete Inserts (Series 300/400) Standard lengths 10 ft. and 20 ft. Length tolerance 3 16". Assemblies available in any length from 12" to 20 ft. Consult factory. Metal Framing, Pipe Hangers and Accessories Insert with end caps and foam filler strip installed. Material: B-302 and C-302 Insert Channel-12 ga. steel. B-804 and C-804 End caps -- 12 ga. steel. Superstrut continuous insert channel is cold formed from 12 gauge hot rolled strip steel in two basic sizes as follows: CAT. NO. B-302 1 5 8" x 13 16" dim. 4" 7 8" slot 7 8" slot CAT. NO. C-302 1 5 8" x 1 3 8" dim. Finishes Product is available in GoldGalv(R) pre-galvanized (PG), hot dipped galvanized (HDG) and stainless steel (SS). Contact your T&B Sales team for delivery and pricing. Standard lengths are 10 ft. and 20 ft. Product is supplied with foam filler and end caps to prevent seepage of concrete into channel. B-302 B804 Application For casting into concrete walls, floors or ceilings to provide attachment anywhere along the continuous slot. 4" Design Data Load ratings as shown have a safety factor of 3 in 3,000 lb. hard rock concrete. Where "good" concrete does not exist, the load ratings shall not apply. C-804 GoldGalv(R) hardware finish is standard for all Superstrut products. This is a multi-process finish of electro-plated zinc, followed by gold colored zinc dichromate to give excellent corrosion resistance and a superior paint base. See page F-3 for a complete description of the GoldGalv(R) hardware finish. GoldGalv(R) hardware will be furnished if no other finish is specified. C-302 Standard Finish - GoldGalv(R), unless otherwise stated. Design Load lbs. 2,000 lbs. per foot in 3,000 lbs. hard rock concrete with a safety factor of 2. 16" 13 16" 13 NOTE: B-302 and C-302 are furnished with: A. Concrete safe tape applied to interior of channel to cover holes. B. Styrene insert between tape and 7 8" continuous opening. 1 8" 1 8" 1 11516" 16" 13 1 C. Two end caps on either side of strut to prevent concrete seepage. 2 12" 158" 138" B-302 158" C-302 CAT. NO. DESCRIPTION B-302* C-302* B804 C-804 Insert channel 12 ga. steel -- 13 16" depth Insert channel 12 ga. steel -- 1 3 8" depth End cap in B Series Concrete Insert End cap in C Series Concrete Insert *Add suffix -10 for 10' lengths and -20 for 20' lengths F-22 tnb07_gm102_F_22_23 1/18/08 9:41 AM Page F-23 Concrete Inserts 450 -- End Cap CAT. NO. C-450TB FOR CHANNEL "X" MATERIAL STD. CTN. C-1,200 3" 12 ga. 100 Do not come in pairs, order number of total pieces required. Inserts may be assembled from short pieces of channel by use of end caps. 450 Order closure strip separately. 31732" 2" 158" * An insert with a knockout saves covering the opening. Accommodates hanger rod sizes from 14" through 78" by means of an AB-102 insert nut * Design load: 1,350 lbs. in 3,000 lb. hard rock concrete with a safety factor of 3 138" Knockout * Order AB-102 nut separately 11932" 12 ga. Steel 452TB AB-102 -- Unhardened Square Nut CAT. NO. AB102 1/4 AB-102-3/8 AB-102-1/2 AB-102-5/8 AB-1002-3/4 AB-102-7/8 SIZE (IN.) STD. CTN. 4 8 1 2 5 8 3 4 7 8 50 100 100 50 50 50 1 3 AB-102 For use with Spot Insert Cat. No. 452. C475 -- Metal Deck Ceiling Bolt Metal Deck Ceiling Bolts are used with our Figure 123. Rod Couplings ordered separately. Made special to customer order. A 4" 1 Material: Steel Finish: Standard Finish - GoldGalv(R) Black (add suffix "-B") Electro-Galvanized (add suffix "-EG") 6" Ordering: Specify size, dimension "A", catalog number and finish. CAT. NO. WT. EACH A B C MAX. LOAD C475 3/8 C475 1/2 C475 5/8 C475 3/4 C475 7/8 C475 1 .75 .97 1.11 1.42 2.00 6 S p e c i f y 3 8 2 5 8 3 4 7 8 1 1 11 4 11 2 13 4 2 2 1 4 610 1,130 1,810 2,710 3,770 4,960 1 Metal Framing, Pipe Hangers and Accessories 452-TB -- Spot Insert -- Top is Deep Drawn Cup C B C475 A-3 F-23 tnb07_gm102_F_24_25 1/18/08 4:24 PM Page F-24 Beam Clamps Superstrut(R) Beam Clamps Metal Framing, Pipe Hangers and Accessories Materials Most products are manufactured from hot rolled carbon steel bars or hot rolled strip steel. Pipe rollers are cast iron. Products which are copper placed carry the letter "T" in the prefix. Design Loads Where design loads are indicated, they provide for a safety factor of 3 in conformance with the "AMERICAN STANDARD CODE FOR PRESSURE PIPING." GoldGalv(R) hardware finish is standard for all Superstrut products. This is a multi-process finish of electro-plated zinc, followed by gold colored zinc dichromate to give excellent corrosion resistance and a superior paint base. See pages F 3-F 4 for a complete description of the GoldGalv(R) hardware finish. GoldGalv(R) hardware will be furnished if no other finish is specified. Beam Clamps for Mounting Channel 2 38" CAT. NO. 16" 13 A 3" U501 U502 U501, U502 Furnished complete Design load U501 - 2,150 lbs. U502 - 3,000 lbs. FOR CHANNEL A STD. CTN. A-1200 A-1400 B-1200 B-1400 C-1200 B-1402 A-1202 A-1402 C-1202 H-1200 3 3 16 20 413 16 20 8" 8" U504 U505 2 14" 1" 8" 7 1" U510 2" x 1 12" set screw included. Order separately one 12" x 1 12" hex head cap screw and 12" channel nut. 1 Channel A-1,200 A-1,400 F-24 Design Load lbs. 1,000 800 512-U Order separately one 12" x 1 12" hex head cap screw and 12" channel nut. Channel A-1,200 A-1,400 Design Load lbs. 1,000 800 tnb07_gm102_F_24_25 1/18/08 4:24 PM Page F-25 Beam Clamps Beam Clamps for Mounting Channel (continued) 1 14" 3" 1 14" 8" 3 1 Hole 9 16" Dia. 8" 7 1 14" 1 8" U514A 8" x 1 12" set screw included. Design load 1650 lbs./per pair. U515 For all "A" series channel. 1 2" x 1 12" set screw included. Design load 800 lbs. 3 U543 2 18" Wide Flange Beam 1 34" A-1200 Channel 3 12" 1 14" 3 12" U515B For all "B" series channel. 1 2" x 1 12" set screw included. Design load 800 lbs. A-597 Standard Finish -- GoldGalv(R) brand Channel Series A Design load lbs./ea. - 800 CAT. NO. FLANGE WIDTH* A DESIGN LOAD LBS. STD. CTN. U-520 U-521 U-522 2 8-4 2 3 3 4-5 3 4 5 5 8-7 5 8 8 4 10 117 8 2,000 1,300 900 10 10 10 3 1 3 1 58" Metal Framing, Pipe Hangers and Accessories U514 8" x 1 12" set screw included. Design load 750 lbs./per pair. 3 8" 3 5 32 25 U520, U-521 & U-522 Standard Finish - GoldGalv(R) brand Nuts, cap screws and set screws included. *When ordering specify flange width. Standard Finish - GoldGalv(R), unless otherwise stated. A-3 F-25 tnb07_gm102_F_26_27 1/18/08 9:42 AM Page F-26 Beam Clamps Metal Framing, Pipe Hangers and Accessories Beam Clamps for Hanging Rod 114" Beam Clamps -- Malleable Iron, Silver Electroplated Finish 2 58" 8" 7 500SS316, 502SS316 and 503SS316 in 316 Stainless steel, also available. BASE SIZE JAW (IN.) OPENING A B (IN.) CAT. NO. 500-SC 501 502 503-SC 507 508 509 510 511-SC 1 11 2 2 2 5 8 2 1 2 2 12 1 2 7 32 2 7 32 11 4 15 8 2 21 2 23 8 2 3 8 11 4 11 8 11 8 Square nut, order separately. A B TAPPING SET SCREW OF BASE AND LOAD TORQUE IN STD. BACK HOLES RATING INCH-LBS. CTN. 1 5 16 7 8 1 1 13 8 2 18 15 16 5 8 5 8 4 -20 16 -18 3 8-16 1 2-13 1 2-13 1 2-13 10-24 1 4 -20 10-24 1 5 2 78" 250 500 750 1,250 1,250 1,250 150 250 150 60 60 120 250 250 250 60 40 40 50 50 50 20 20 10 100 100 100 Safety Factor of 3. Loan Ratings based on bottom hole of Beam Clamp. CSA File No. LR-52208. Standard Finish - GoldGalv (R), unless otherwise stated. U562 Beam Clamp Optional Use 1 2" set screw included. Rod sizes: 12" Design load lbs. - 800 For 20 swivel application use ES-145- 12 nut. U562 Beam Clamp 2" set screw included. Rod Size: 12" Design load lbs. - 500 1 1" 1 78" 4" 3 US562 Beam Clamp with Swing Hanger 1 2" screw included. Rod sizes: 12". Design load lbs. - 800 2 14" U563 Beam Clamp 8" set screw included. Rod sizes: 38" Design load lbs. - 250 3 A 2" C B D 540 Side Beam Hanger Clip Finishes - GoldGalv(R) brand or Black (B) CAT. NO. A 540 3/8 7 16 540 1/2 EC 9 16 540-5/8 11 16 540-3/4 13 16 B 17 8 17 8 21 2 21 2 C D STD. CTN. 4 4 3 8 3 8 8 15 8 2 2 25 25 25 25 1 1 7 Square nut, order separately U563 Beam Clamp optional Use 38" set screw included. Rod sizes: 38" Design load lbs. - 400 16" Dia. 7 1 4" Dia. 16" Dia. US563 Beam Clamp with Swing Hanger. 38" set screw included. Rod sizes: 38". Design load lbs. - 540 9 2 116" 16" 3 A 2" 2 16" 542 Side Beam Hanger Clip Finishes - GoldGalv(R) brand or Black (B) Rod Size 38" 12" Design Load lbs. 610 1,000 Standard Finish - GoldGalv(R), unless otherwise stated. F-26 A 1 U-568 Beam Clamp Safety Strap Standard Finish - GoldGalv(R) brand For U-563 beam clamp. U-568 Beam Clamp Safety Strap Standard Finish - GoldGalv(R) brand For U-562 beam clamp. tnb07_gm102_F_26_27 1/18/08 9:42 AM Page F-27 Beam Clamps Beam Clamps for Hanging Rod (continued) Coach Screw U577 Clevis & Swing Connector Rod Size 12" Standard Finish - GoldGalv(R) brand For use with wood beam. U-560 -- Heavy-Duty Beam Clamp CAT. NO. A U560 1/4 U-560-3/8 U-560-1/2 U-560-5/8 DIMENSIONS (IN.) B C 4 8 1 2 5 8 8 8 1 4 1 4 8 x 11 2 8 x 11 2 1 2 x 11 2 1 2 x 11 2 1 1 3 3 1 3 Set Screw Included DESIGN LOAD LBS. STD. CTN. 1,050 1,050 2,650 2,650 25 25 25 25 8" 7 Tapped Hole Size Channel Angle Connector. Standard Finish -- GoldGalv(R). Integral pilot, prevents twist. A B U-564 -- Heavy-Duty Beam Clamp CAT. NO. U-564-3/8 U-564-1/2 U564 5/8 DIMENSIONS (IN.) A B C 8 1 2 5 8 3 4 1 4 1 4 1 8 x 2 1 4 1 2 x 2 3 4 1 2 x 2 3 4 3 Metal Framing, Pipe Hangers and Accessories S-541 Swing Connector Standard Finish - GoldGalv(R) brand Rod Sizes: 38" For use with wood beam. 3 8" x 1 34" bolt, nut and clevis included. Set Screw C Included DESIGN LOAD LBS. STD. CTN. 1,300 3,150 3,150 25 15 25 1 2132" B Tapped Hole Size A A-3 F-27 tnb07_gm102_F_28_29 1/18/08 9:42 AM Page F-28 Beam Clamps Beam Clamps for Hanging Rod Metal Framing, Pipe Hangers and Accessories B E-233 -- Anchor Clip A * Clamps to I-beams, channels, angles and column C * Two sizes are available, one for 38 inch and the other for 12 inch hanger rod. Each takes flanges up to .8 inch thickness For use with E-231 and E-232 clamps when hanger rod is not in straight through position. E-231 -- Structural Steel Clamp CAT. NO. DIMENSIONS (IN.) B A A C WT. LBS./C 8 16 31 53 8" or 1 2" Rod 3 *E-231-38 **E-231-12 2 1 2 3 12 19 32 7 15 Assembly requires two H-116-C ( 3 8") or two H-116-D ( 1 2") square nuts to attach hanger rod. 1 2" steel. E-233-38-6 E-233-38-10 E-233-12-6 E-233-12-10 * Load rating of 500 lbs. with a safety factor of three. ** Load rating of 800 lbs. with a safety factor of three. Patented Galv-Krom (R) finish. Galv-Krom (R) finish. A C E-232 -- Clamp with Swing Connector CAT. NO. DIAMETER FOR ROD 8" or 1 2" Rod *E-232-38 **E-232-12 A DIMENSIONS (IN.) B C WT. LBS./C 3 3 1 8" 2" 9 16 8 7 ROD SIZE MAX, BEAM WIDTH "A" FOR USE WITH WT. LBS./C 8" 8" 1 2" 1 2" 6" 10" 6" 10" E-231-38 or E-232-38 E-231-12 or E-232-12 20 33 26 37 3 3 Anchor Clips should be used when clamps are subject to excessive vibration. To obtain the correct size clips add 1 inch to the flange width. If length required is not standard, order next largest standard length. Standard Finish - GoldGalv (R), unless otherwise stated. B 16 2 9 64 7 1 15 8 * Load rating of 400 lbs. with a safety factor of three. ** Load rating of 550 lbs. with a safety factor of three. Galv-Krom (R) finish. * E-231 clamp with swing connector * Affords a convenient method of attaching to angled beams F-28 CAT. NO. 48 76 tnb07_gm102_F_28_29 1/18/08 9:42 AM Page F-29 Beam Clamps Beam Clamps for Hanging Rod (continued) E-160 -- Adjustable Beam Clamp * Clamps to I-beam where edge of beam flange does not exceed .8 inch thickness * Hook rod is furnished in three lengths to fit beam flanges up to 6, 9 or 12 inch widths CAT. NO. 1 2" HANGER RODS 1 BEAM FLANGE WIDTH (IN.) WT. LBS./C 8, 11 or 14 2 1 E-160-12-6 E-160-12-9 E-160-12-12 21 2 to 6 51 2 to 9 81 2 to 12 3 Min. 3 58 Max. 115 125 154 2 8 1 16 x 112 3 Load rating 800 lbs. with a safety factor of three. Assembly requires hanger rod of the proper length and size plus two H-114-D nuts 3 16" steel, 1 2" hook rod. Galv-Krom(R) finish. U-568 Beam Clamps CAT. NO. U568 1 U-568-2 U-568-3 U-568-4 U-568-5 U-568-6 U-568-7 U-568-8 BEAM FLANGE WIDTH A STD. CTN. 6 9 6 9 12 6 9 12 8 11 9 12 15 9 12 15 50 50 25 50 50 25 25 25 A U-568 Beam Clamp Safety Strap Standard Finish - GoldGalv(R) brand For U-560 and U-564 beam clamp. 16 ga. material. Standard Finish - GoldGalv(R), unless otherwise stated. U570 -- Beam Clamp with Safety Rod U569 -- Beam Clamp * Standard finish - GoldGalv(R) * Maximum flange width 5" 8" 3 * Design load 400 lbs. * Standard finish GoldGalv(R) * Sizes: 12" For use with 38" rod, see U569. * Flange width 4" min. - 8" max. * Design load 650F - 500 lbs. Metal Framing, Pipe Hangers and Accessories 2" Rod 8" 3 A C-775L -- Clamp with Lock Nut CAT. NO. A D B C775L 3/8 C-775L-1/2 C-775L-5/8 C-775L-3/4 C-775L-7/8 ROD SIZE 8 2 5 8 3 4 7 8 A B C D DESIGN LOAD LBS. STD. CTN. 8 8 1 2 5 8 3 4 4 4 3 4 3 4 1 23 8 23 8 25 16 25 16 35 16 2 3 8 2 3 8 2 3 8 2 3 8 3 400 500 550 630 1,200 100 100 50 50 25 3 3 3 1 3 3 Standard Finishes - GoldGalv (R) brand, Black (B), Stainless Steel (SS). C-775L C Carbon Steel. A-3 F-29 tnb07_gm102_F_30_31 1/18/08 9:43 AM Page F-30 Beam Clamps Metal Framing, Pipe Hangers and Accessories Beam Clamps for Hanging Rod C-777 -- Steel Top Beam Clamp & C-778 -- Steel Wide JawTop Beam Clamp M-777 -- Steel Top Beam Clamp * Junior Top Beam C-Clamp B * Available in Electro-Galvanized (EG) or Black (B) Malleable Iron A D * Provides clamping under roof installations with bar joist construction. Max. joist thickness 58" E C * Order by Cat. No., rod size M-777 3 ROD SIZE A DESIGN LOAD LBS. 8 1 2 5 8 3 4 7 8 350 470 550 700 1,000 4" 3 C-777, C-788 ROD SIZE A CAT. NO. C777 3/8 C-777-1/2 C-778-3/8 C-778-1/2 PIPE SIZE 8 1 2 3 8 1 2 B 2-4 5-8 1 2-4 5-8 3 C E F 16 9 16 7 16 9 16 1 11 4 1 11 4 900 2,430 900 2,430 D 1 3 16 3 4 11 2 3 4 1 3 16 1 1 4 11 2 11 4 1 DESIGN LOAD LBS. 1 1 1 1 7 Standard Finish - Black (B) or GoldGalv (R) brand. A STD. CTN. 100 50 100 50 M-778 -- Steel Wide JawTop Clamp * Top Beam C-Clamp * Rod Size: 38, 12, 58, & 34 M-775L -- Clamp with Lock Nut * Available in Electro-Galvanized (EG) or Black (B) Malleable Iron * Provides clamping under roof installations with bar joist type construction B C * Order by Cat. No. and rod size M-778 M-775L 1 14" A ROD SIZE A DESIGN LOAD LBS. 8 1 2 5 8 3 4 400 500 850 900 3 CAT. NO. M-775L-3/8 M-775L-1/2 M-775L-5/8 M-775L-3/4 ROD SIZE A 8 1 2 5 8 3 4 3 A B C DESIGN LOAD LBS. 4 3 4 3 4 3 4 13 4 13 4 2 2 400 400 440 500 3 Available in Electro-Galvanized (EG) or Black (B) Malleable Iron. F-30 STD. CTN. 100 100 50 50 tnb07_gm102_F_30_31 1/18/08 9:43 AM Page F-31 Beam Clamps Beam Clamps for Mounting Pipe and Conduit C-247, C-248, & C-249 -- Steel Conduit Clamps Pipe Supports Three types of pipe clamps are available to provide right angle, vertical and parallel attachment to a beam. Types RC, EC and PC are malleable iron clamps with an edge that grips the structural member for maximum holding power when tightened. Type RCS clamps are all steel, providing two bearing surfaces for strong attachment for mounting pipe or conduit at right angles to the beam. All parts are electrogalvanized, including the threads. The clamps are designed for clamping to a wide variety of beam thicknesses and tapers. Can be installed using only a wrench. * Designed to hold the conduit snug against the support with conduit either parallel or at right angle to it * The case hardened set screw bites into the structural member for maximum security * 8" steel 1 * EC Clamp -- Malleable Iron * PC Clamp -- Malleable Iron * RCS Clamp -- Steel * For mounting pipe or conduit vertically across the beam * For mounting pipe or conduit parallel to the beam * Use SS316 suffix for 316 Stainless Steel * Use SS316 suffix for 316 Stainless Steel * Use HDG suffix for hot dip galvanized * Use HDG suffix for hot dip galvanized * For mounting pipe or conduit at right angles to the beam * Use SS316 suffix for 316 Stainless Steel C B 1 D MAX. BEAM FLANGE C-247 C-248 2 3 4 8 7 16 1 1 1 4 1 1 2 Dim. A Dim. B Dim. C Dim. D Per Carton Wt. in lbs./C 1 3 4 1 2 1 2 14 1 38 2 34 9 16 100 33 2 9 16 13 4 3 9 16 50 36 1 5 * Use HDG suffix for hot dip galvanized 8 A CONDUIT SIZE * RC Clamp -- Malleable Iron THICKNESS C-249 11 2 11 4 5 8 31 4 21 2 4 5 8 50 59 Galv-Krom finish. Standard Finish - GoldGalv(R), unless otherwise stated. CAT. NO. & SIZE RCS-1/2 RCS-3/4 RCS-1 RCS-1-1/4 RCS-1-1/2 RCS-2 RC-3/8 RC-1/2 RC-3/4 RC-1 RC-1-1/4 RC-1-1/2 RC-2-SC RC-2-1/2 RC-3 RC-3-1/2 RC-4-SC DIMENSIONS (IN.) O.D. OF NOM. CONDUIT CONDUIT OR OR PIPE PIPE SIZE .840 1.050 1.315 1.660 1.900 2.375 .675 .840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 2 4 1 1 14 1 12 2 3 8 1 2 3 4 1 1 14 1 12 2 2 12 3 3 12 4 1 3 STD. CTN. 50 50 50 50 50 50 50 50 50 50 50 50 50 25 25 25 20 CAT. NO. & SIZE EC 1/2 EC-3/4 EC-1 EC-1-1/4 EC-1-1/2 EC-2 EC-2-1/2 EC-3 PC-3/8 PC 1/2 PC-3/4 PC-1 PC-1-1/4 PC-1-1/2 PC-2 PC-2-1/2 PC-3 PC-3-1/2 PC-4 DIMENSIONS (IN.) O.D. OF NOM. CONDUIT CONDUIT OR OR PIPE PIPE SIZE .840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 .675 .840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.00 4.500 2 4 1 1 14 1 12 2 2 12 3 3 8 1 2 3 4 1 1 14 1 12 2 2 12 3 3 12 4 1 3 STD. CTN. 50 50 25 25 25 25 10 10 50 50 50 50 25 25 25 25 10 10 10 Metal Framing, Pipe Hangers and Accessories * A versatile clamp for attaching conduit to any type of beam, channel, angle, or column A-3 F-31 tnb07_gm102_F_32_33 1/18/08 4:24 PM Page F-32 Beam Clamps Metal Framing, Pipe Hangers and Accessories Conduit and Pipe Hangers 6H Series Conduit and Pipe Hanger * Accommodates 12" through 4" EMT or rigid conduit 6H Series Without bolt Fig. 1 6H-B Series With bolt and hex nut Fig. 2 * Can be used for either vertical or horizontal installation * 6HTB Series have a built-in nut so there are less parts to handle or drop * Installs easily with a screwdriver 6H- T Threaded Series threaded without bolt Fig. 3 6H- TB Threaded Series Threaded with bolt Fig. 4 WITHOUT BOLT CAT. FIG. NO. NO. 6H0 6H0 T 6H1 6H1-T 6H2 1 3 1 3 1 6H2 1/2 1 6H3-SC 1 6H4 1 6H5 1 6H6 6H7 6H8 6H9 1 1 1 1 WITH BOLT CAT. NO. 6H0 B 6H0 TB 6H1-B 6H1-TB 6H2-B 6H2-TB 6H2 1/2-B 6H2 1/2-TB 6H3-B 6H3-TB 6H4-B 6H4-TB 6H5-B 6H5-TB 6H6-B 6H7-B 6H8-B 6H9-B FIG. NO. EMT 2 4 2 4 2 4 2 4 2 4 2 4 2 4 2 2 2 2 2" 2" 3 4" 3 4" 1" 1" 11 4" 11 4" 11 2" 11 2" -- -- 2" 2" 21 2" 3" 31 2" 4" Standard Finish - Electro-Galvanized (EG). Use SS suffix for Stainless Steel. Loading rating 500 lbs. with a safety factor of 3. F-32 RIGID CONDUIT OR PIPE STD. CTN. 8"-1 2" 8"-1 2" 3 4" 3 4" 1" 1" -- -- 11 4" 11 4" 1 1 2" 1 1 2" 2" 2" 21 2" 3" 31 2" 4" 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 100 1 3 1 3 tnb07_gm102_F_32_33 1/18/08 4:24 PM Page F-33 Pipe Straps, Conduit Clamps & Hangers Excellent Corrosion Resistance and a Superior Paint Base GoldGalv(R) hardware finish is standard for all Superstrut products. This is a multi-process finish of electro-plated zinc, followed by gold colorized zinc dichromate to give excellent corrosion resistance and a superior paint base. See page F 3 for a complete description of the GoldGalv(R) hardware finish. GoldGalv(R) hardware will be furnished if no other finish is specified. Materials Most products are manufactured from hot rolled carbon steel bars or hot rolled strip steel. Pipe rollers are cast iron. Products which are copper plated carry the letter "T" in the prefix. Where design loads are indicated, they provide for a safety factor of 3 in conformance with the "AMERICAN STANDARD CODE FOR PRESSURE PIPING." Hanger Design Pipe hangers are of advanced design and afford a new and better way of ordinary use. Standard Dimensions The following, except where noted, apply to all beam clamp fittings. Hole Size: 916" diameter Material: 1 58" wide Material: 14" thick GoldGalv(R) Outperforms Copper Plated In a test conforming to ASTM G-87-84, also known as the Kesternich Test, Superstrut's GoldGalv(R) electrogalvanized zinc dichromate finish achieved superior corrosion resistance in comparison to copper plated. Performed and certified by an independent testing laboratory, the stringent Kesternich test is equivalent to an acid rain environment. The test procedure exposes subject material to condensed moisture containing harsh sulfur dioxide (S02) which accelerates the aging process. During the series of test time cycles, the material is thoroughly inspected for signs and progression of damaging red rust. The first test series conducted included various light-duty adjustable clevis hangers assembled to copper tubing. The GoldGalv(R) finish exhibited five times the red rust resistance as compared to copper plated. The second test series was performed on various O.D. pipe straps attached to copper tubing and continuous slot channel. GoldGalv(R) achieved greater red dust resistance by seven times over copper plating. Once tests were completed, all copper tubes were split open and inspected for signs of electrolysis. The copper tubes showed minimal deterioration as a result of the test and no indication of electrolysis occurrence when attached to material with GoldGalv(R) finish. Metal Framing, Pipe Hangers and Accessories Design Loads ASTM G-87-84 Corrosion Test Results FINISH INITIAL RED RUST 50% RED RUST 100% RED RUST 216 hours 48 hours *Never obtained 72 hours 192 hours 48 hours 240 hours 168 hours Test Series I: Light-Duty Adjustable Clevis Hanger GoldGalv Copper Plated 120 hours 24 hours Test Series II: O.D. Pipe Straps GoldGalv(R) Copper plated 168 hours 24 hours *Test series ended after 360 hours. Standard Finish - GoldGalv(R), unless otherwise stated. Standard Finish - GoldGalv(R), unless otherwise stated. A-3 F-33 tnb07_gm102_F_34_35 1/18/08 4:23 PM Page F-34 Pipe Straps, Conduit Clamps & Hangers Metal Framing, Pipe Hangers and Accessories Superstrut Pipe Straps Pre-assembled for Easy Handling and Sorting Superstrut Pipe Straps are designed to be twist inserted anywhere along the slot side of the channel. Pipes can be placed as closely as pipe couplings permit. Some unique features of the straps include: * Bolt head is combination slot and hex head for flexibility of attachment * Square nut is captivated on the shoulder for easy one-handed tightening * Straps are interchangeable with 11 2" strut for broader application * Straps are shipped assembled so counting and sorting are easier * Pipe or conduit sizes are sown on the strap for easy identification Design Loads * All Superstrut Straps are preassembled for easy handling and sorting 701 - Superstrut Straps for O.D. Tubing CAT. NO. 700 - Superstrut Straps for EMT CAT. NO. EMT SIZE (IN.) O.D. SIZE (IN.) STEEL STRAP THICKNESS DESIGN LOAD STD. (LBS.) CTN. Standard Finishes - GoldGalv(R) brand. Consult Factory regarding other Finishes and Materials 700 38-STR 700-12-STR 700-34-STR 700-1-STR 700-1-14-STR 700-1-12-STR 700-2-STR F-34 8 2 3 4 1 11 4 11 2 2 3 1 0.577 0.706 0.922 1.163 1.510 1.740 2.197 14 ga. 14 ga. 14 ga. 14 ga. 14 ga. 12 ga. 12 ga. 750 750 750 750 750 800 800 100 100 100 100 50 50 50 701-14 701-38 701-1/2-STR 701-5/8 701-3/4 701-7/8 701-1-STR 701-1-1/8 701-1-1/4 701-1-3/8 701-1-1/2 701-1-5/8 701-1-3/4 701-1-7/8 701-2 701-2-1/8 701-2-1/4 701-2-3/8 701-2-1/2 701-2-58 TUBING O.D. (IN.) STEEL STRAP THICKNESS DESIGN LOAD (LBS.) STD. CTN 4 8 1 2 5 8 3 4 7 8 1 11 8 11 4 13 8 11 2 15 8 13 4 17 8 2 2 1 8 2 1 4 2 3 8 2 1 2 2 5 8 14 ga. 14 ga. 14 ga. 14 ga. 14 ga. 14 ga. 14 ga. 14 ga. 14 ga. 14 ga. 14 ga. 14 ga. 12 ga. 12 ga. 12 ga. 12 ga. 12 ga. 12 ga. 12 ga. 12 ga. 750 750 750 750 750 750 750 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,000 1,300 1,300 1,300 1,300 1,300 100 100 100 100 100 100 50 100 25 100 25 100 25 50 50 50 25 25 25 50 1 3 tnb07_gm102_F_34_35 1/18/08 4:23 PM Page F-35 Pipe Straps, Conduit Clamps & Hangers Superstrut Pipe Straps (continued) 701 - Superstrut Straps for O.D. Tubing (continued) 702 - Superstrut Straps for Rigid Conduit, IMC and Pipe * For Rigid or IMC Conduit, Pipe and Electric Metal Tubing (EMT) CAT. NO. RIGID CONDUIT OR PIPE SIZE O.D. SIZE (IN.) STEEL STRAP THICKNESS DESIGN LOAD (LBS.) STD. CTN. Standard Finishes - GoldGalv(R) brand, Electro-Galvanized EG (Silver) 701-2-3/4 701-2-7/8 701-3 701-3-18 701-3-14 701-3-3/8 701-3-1/2 701-3-5/8 701-3-3/4 701-3-7/8 701-4 701-4-1/8 701-4-1/4 701-4-3/8 701-4-1/2 701-4-5/8 701-4-3/4 701-4-7/8 701-4 701-5-1/8 701-5-1/4 701-5-3/8 701-5-1/2 701-5-5/8 701-5-3/4 701-5-7/8 701-6 701-6-1/8 701-6-1/4 701-6-3/8 701-6-1/2 701-6-5/8 701-6-3/4 701-6-7/8 701-8 TUBING O.D. (IN.) STEEL STRAP THICKNESS DESIGN LOAD (LBS.) STD. CTN 2 3 4 2 7 8 3 3 1 8 3 1 4 3 3 8 3 1 2 3 5 8 3 34 3 78 4 4 18 4 14 4 38 4 12 4 58 4 34 4 78 5 5 18 5 14 5 38 5 12 5 58 5 34 5 78 6 6 18 6 14 6 38 6 12 6 58 6 34 6 78 8 12 ga. 12 ga. 12 ga. 12 ga. 12 ga. 12 ga. 12 ga. 11 ga. 11 ga. 11 ga. 11 ga. 11 ga. 11 ga. 11 ga. 11 ga. 11 ga. 11 ga. 11 ga. 11 ga. 11 ga. 11 ga. 11 ga. 11 ga. 10 ga. 10 ga. 10 ga. 10 ga. 10 ga. 10 ga. 10 ga. 10 ga. 10 ga. 10 ga. 10 ga. 10 ga. 1,300 1,300 1,300 1,300 1,300 1,300 1,300 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 25 25 25 25 25 25 25 25 25 25 25 25 25 25 10 10 10 10 25 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 8" 2" 3 4" 1" 11 4" 11 2" 2" 21 2" 3" 31 2" 4" 41 2" 5" 6" 8" 10" 12" 3 1 0.675 0.840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.000 5.563 6.625 8.625 10.750 12.750 14 ga. 14 ga. 14 ga. 14 ga. 14 ga. 12 ga. 12 ga. 12 ga. 12 ga. 11 ga. 11 ga. 11 ga. 11 ga. 11 ga. 11 ga. 10 ga. 10 ga. 750 750 750 750 800 800 800 1,000 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 1,650 100 100 100 100 50 50 50 50 50 25 25 25 25 10 10 25 25 Standard Finish - GoldGalv(R), unless otherwise stated. 703 - Universal Clamp CAT. NO. PIPE O.D. STEEL STRAP THICNESS DESIGN LOAD (LBS.) Metal Framing, Pipe Hangers and Accessories CAT. NO. 702-38 702-12 702-34 702-1 702-1-14 702-1-12 702-2-STR 702-2-12 702-3 702-3-12 702-4 702-4-12 702-5 702-6 702-8 702-10 702-12 STD. CTN. Standard Finishes - GoldGalv(R) brand, Electro-Galvanized (Silver) -- use EG suffix, (i.e.) 703-1-1/2EG 703-1/2 703-3/4 703 1 703-1-1/4 703-1-1/2 703-2 .706 - .840 .932 - 1.050 1.163 - 1.315 1.508 - 1.660 1.738 - 1.900 2.195 - 2.375 16 ga. 14 ga. 14 ga. 14 ga. 14 ga. 14 ga. 400 550 550 800 800 800 100 100 100 50 50 50 Standard Finishes - GoldGalv(R) brand, Electro-Galvanized (i.e.) 701-1-1/2EG (Silver) Copper Plated CT701-1-1/2. Consult factory regarding other finishes and materials. A-3 F-35 tnb07_gm102_F_36_37 1/18/08 9:39 AM Page F-36 Pipe Straps, Conduit Clamps & Hangers Angler(R) Pipe and Conduit Clamp NEW! Metal Framing, Pipe Hangers and Accessories Angled for Easy Tightening! A difficult angle can make it time-consuming to fit a clamp to a pipe or conduit. The bent tab design allows the bolt to extend up at a 30 angle, providing easy access to the bolt even when clamps are installed side by side. Simply slide the pre-threaded bolt through the keyhole-shaped opening and tighten. And no need to unscrew the bolt before installing! * Easy tool access to the bolt with a screwdriver or power tool, even when clamps are installed side by side * Keyhole-shaped opening in the strap allows the bolt to be fed through the strap without first being unthreaded * One piece design -- no disassembly needed, no parts to lose or drop. Convenient to carry and store * Fits snuggly to EMT, IMC, rigid, and standard pipe * Embossed ribs strengthen the hooks connecting the strap to the strut * Highest load ratings of any universal break-apart strap in the industry * UL(R) Listed and CSA approved * Integrated, rolled threading provides the same load performance of a hex nut without the extra hardware Easy to Install 1 One-piece design snaps apart. 2 Clamp fits to the edge of conduit. F-36 (R) Pipe and Conduit Clamp 3 Hex head screw fits through keyhole. 4 Tighten with manual or power tool. tnb07_gm102_F_36_37 1/18/08 9:40 AM Page F-37 Pipe Straps, Conduit Clamps & Hangers Angler(R) Pipe and Conduit Clamp (continued) For Rigid Conduit and Standard Pipe For EMT, IMC, Rigid and Standard Pipe NEW! CAT. NO. SIZE Rigid Series STRAP DESIGN INSTALL TORQUE THICKNESS LOAD (LBS.) (IN. LBS.) STD. CTN. Galv-Krom(R) Finish C 109 1/2 C 109 3/4 C 109 1 C 109 1 1/4 C 109 1 1/2 C 109 2 C 109 2 1/2 C 109 3 C 109 3 1/2 C 109 4 2" 4" 1" 1 14" 1 12" 2" 2 12" 3" 3 12" 4" 1 3 C 109 1/2 EG C 109 3/4 EG C 109 1 EG C 109 1 1/4 EG C 109 1 1/2 EG C 109 2 EG C 109 2 1/2 EG C 109 3 EG C 109 3 1/2 EG C 109 4 EG 2" 4" 1" 1 14" 1 12" 2" 2 12" 3" 3 12" 4" 3 SIZE STRAP DESIGN INSTALL TORQUE THICKNESS LOAD (LBS.) (IN. LBS.) STD. CTN. Galv-Krom(R) Finish 14 ga. 14 ga. 14 ga. 14 ga. 12 ga. 12 ga. 12 ga. 12 ga. 11 ga. 11 ga. 400 500 500 500 800 800 800 800 1,200 1,200 40 40 40 40 60 60 60 60 60 60 100 100 100 100 50 50 50 50 25 25 SilverGalvTM Finish 1 CAT. NO. C 109R 1/2 C 109R 3/4 C 109R 1 C 109R 1 1/4 C 109R 1 1/2 C 109R 2 C 109 2 1/2 C 109 3 C 109 3 1/2 C 109 4 2" 4" 1" 1 14" 1 12" 2" 2 12" 3" 3 12" 4" 1 3 14 ga. 14 ga. 14 ga. 14 ga. 12 ga. 12 ga. 12 ga. 12 ga. 11 ga. 11 ga. 600 600 600 600 800 800 800 800 1,200 1,200 40 40 40 40 60 60 60 60 60 60 100 100 100 100 50 50 50 50 25 25 14 ga. 14 ga. 14 ga. 14 ga. 12 ga. 12 ga. 12 ga. 12 ga. 11 ga. 11 ga. 600 600 600 600 800 800 800 800 1,200 1,200 40 40 40 40 60 60 60 60 60 60 100 100 100 100 50 50 50 50 25 25 SilverGalvTM Finish 14 ga. 14 ga. 14 ga. 14 ga. 12 ga. 12 ga. 12 ga. 12 ga. 11 ga. 11 ga. 400 500 500 500 800 800 800 800 1,200 1,200 40 40 40 40 60 60 60 60 60 60 100 100 100 100 50 50 50 50 25 25 C 109R 1/2 EG C 109R 3/4 EG C 109R 1 EG C 109R 1 1/4 EG C 109R 1 1/2 EG C 109R 2 EG C 109 2 1/2 EG C 109 3 EG C 109 3 1/2 EG C 109 4 EG 2" 4" 1" 1 14" 1 12" 2" 2 12" 3" 3 12" 4" 1 3 Metal Framing, Pipe Hangers and Accessories Universal Series Hex head size 38" for 12" to 114" sizes, 12" for 112" to 4" sizes. Material: Stamped Steel. Pipe sizes 2 12" to 4" utilize the same clamps for the Rigid Series and the Universal Series. A-3 F-37 tnb07_gm102_F_38_39 1/18/08 4:23 PM Page F-38 Pipe Straps, Conduit Clamps & Hangers Pipe Straps Metal Framing, Pipe Hangers and Accessories A-716 -- Snap*Guard(R) Cushioned Clamp Tube Series P-716 - Pipe Series O.D. TUBING SIZES TUBE O.D. ASSEMBLY PART # STANDARD PIPE SIZES NOMINAL PIPE SIZE ASSEMBLY PART # STD. CTN. Standard Finishes - GoldGalv(R) brand. Available in Stainless Steel -- use SS suffix. (i.e) A-716-1SS Electro-Galvanized (Silver) -- use EG suffix. (i.e) A-716-1EG A-716 P-716 * Assembly consisting of GoldGalv(R) finish steel clamp with bolt/locknut and cushion * Secure pipes, tubes and hoses for fluid conductors * Installation is easy and requires no more time than a simple pipe clamp installation * Cushion absorbs the shocks and associated vibrations from fluid surges in tubes, pipes and hoses * It can handle temperatures from -40F to 300F * Cushioned Clamp assemblies are available individually bagged U-716, U-717 -- Two Hole Cushioned Clamp A-716-1/4 A-716-3/8 A-716-1/2 A-716-5/8 A-716-3/4 A-716-7/8 A-716-1 A-716-1-1/8 A-716-1-1/4 A-716-1-3/8 A-716-1-1/2 A-716-1-5/8 A-716-1-3/4 A-716-1-7/8 A-716-2 A-716-2-1/8 A-716-2-3/8 A-716-2-5/8 A-716-3-1/8 A716-4-1/8 ASSEMBLY PART NUMBER P-716-1/4 P-716-3/8 P-716-1/2 P-716-3/4 P-716-1 P-716-1-1/4 P-716-1-1/2 P-716-2 P716-2-1/2 P-716-3 P-716-3-1/2 P-716-4 -- -- -- -- -- -- -- -- 4 8 1 2 5 8 3 4 7 8 1 118 114 138 112 158 134 178 2 218 238 258 318 418 1 3 COPPER AND STEEL TUBING O.D. COPPER WATER PIPE (NOM.) 4 8 1 2 3 4 1 114 112 2 212 3 312 4 -- -- -- -- -- -- -- -- 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 10 10 10 10 10 1 3 NOMINAL PIPE SIZE STD. CTN. Standard Finishes - GoldGalv(R) Brand U-716 U-717 * Guides, protects and uniformly spaces line runs. Low cost, time saving method of attaching tubing and hose to equipment * Cushion is built to withstand the effects of most oils, chemical and industrial cleaning compounds, in temperatures from -50F to 275F. Interlock edge insures cushion remains in place * Clamp available in steel with the GoldGalv(R) hardware finish * Attached with two standard fasteners to any flat surface, this clamp eliminates the use of special channels, providing a savings in both space requirements and cost * Cushioned clamps reduce vibration, shock, and noise in fluid systems and eliminates electrolysis F-38 U716 1/4 U-716-3/8 U-716-1/2 U-716-5/8 U-716-3/4 U-716-7/8 U-716-1 U-716-1-1/8 U-716-1-1/4 U-716-1-3/8 U-716-1-1/2 U-716-1-5/8 U-716-1-3/4 U-716-1-7/8 U-716-2 U-716-2-1/8 U-716-2-3/8 U-717-3/4 U-717-1 U-717-1-1/4 4 8 1 2 5 8 3 4 7 8 1 118 114 138 112 158 134 178 2 218 2 38 -- -- -- 1 3 -- 1 4 3 8 1 2 5 8 3 4 -- 1 -- 114 -- 112 -- -- -- -- -- -- -- -- Standard Finish - GoldGalv(R), unless otherwise stated. -- 4 8 1 3 2 -- -- -- -- -- -- -- 112 -- -- -- 3 4 1 114 1 25 25 25 25 25 25 25 25 10 10 10 10 10 10 10 10 10 25 10 10 tnb07_gm102_F_38_39 1/18/08 4:23 PM Page F-39 Pipe Straps, Conduit Clamps & Hangers Pipe Straps (continued) C-716 -- Isolator for Copper Tubing Features Designed for use with: Superstrut channel and pipe straps and Superstrut C-711 Hangers and may also be used with all standard flatbar or malleable iron hangers. AA Materials Application To provide a means to effectively isolate copper tubing from its supports to prevent the transmission of sound and vibration. C716 1/2 C-716-3/4 C-716-1 C-716-1-1/4 C-716-1-1/2 C-716-2 C-716-2-1/2 C-716-3 C-716-3-1/2 C-716-4 SIZE NOMINAL PIPE SIZE HANGER, C-711 OR PIPE STRAP, 702 WIDTH A STD. CTN. 2 4 1 1 1 4 1 1 2 2 212 3 3 1 2 4 2 4 1 1 1 4 1 1 2 2 212 3 3 1 2 4 4 4 1 1 1 4 1 1 2 2 1 2 3 3 1 2 4 5 2 3 8 2 3 8 2 3 8 2 3 8 2 3 8 2 3 8 215 32 2 3 8 4 1 4 4 1 4 100 100 100 50 50 50 50 50 30 20 1 1 3 3 3 3 Order by Cat. No. and size. Standard Finish - GoldGalv(R), unless otherwise stated. S716 -- Cushioned Strip -- For Isolation and Vibration Applications For use with 701 O.D. tubing and pipe clamp. To determine 701 clamp size add 14" to O.D. tube size to allow for the cushioned strip material. 1 4" markings for fast measuring and cutting. Measurement chart is printed on back of carton. 20 feet included in each carton. C-708-U -- Short Strap for Channel or Wall Mounting B A Order 701 clamp separately S716 Sold in a carton of 20 feet. Prevent metal-to-metal contact with the cushioned strip material. It aids in sound insulation, shock absorption and protects against corrosion, distortion and abrasion. Cushioned strip material is designed for optimal use between -30F and 300F. Cushioned strip material combined with the Superstrut 701 pipe strap can handle clamping assignments from 14" to 6. CUSH-A-STRIP 15 8" CAT. NO. PIPE SIZE A B HOLE SIZE STOCK SIZE DESIGN LOAD LBS. STD. CTN. C-708-U-1/2 C-708-U-3/4 C-708-U-1 C-708-U-1-1/4 C-708-U-1-1/2 C-708-U-2 C-708-U-2-1/2 C-708-U-3 C-708-U-3-1/2 C-708-U-4 C-708-U-5 C-708-U-6 2 4 1 1 1 4 1 1 2 2 2 1 2 3 3 1 2 4 5 6 2 7 8 3 116 3 3 8 3 1116 3 1516 5 3 4 6 316 6 316 7 5 16 7 1316 8 7 8 9 1516 2 2 316 2 1 2 2 316 3 116 4 1 8 4 916 5 316 5 1116 6 316 7 1 4 8 516 32 32 9 32 9 32 9 32 7 16 7 16 7 16 7 16 7 16 7 16 7 16 8 x 1 5 8 8 x 1 5 8 1 8 x 1 5 8 1 8 x 1 5 8 1 8 x 1 5 8 1 4 x 1 5 8 1 4 x 1 5 8 1 4 x 1 5 8 1 4 x 115 32 1 4 x 115 32 1 4 x 115 32 1 4 x 1 5 8 650 650 650 650 650 650 1,000 1,000 1,000 1,200 1,200 1,200 50 50 50 25 25 25 25 25 25 25 10 10 1 3 9 9 1 1 Metal Framing, Pipe Hangers and Accessories Manufactured from one-piece steel shell with reinforcing ribs for stiffening and alignment. Padding is of processed non-conducting hairfelt and is cemented to the metal. Design of ribs creates a hinge so isolator may be opened and closed to install. CAT. NO. Carbon Steel. Standard Finish - GoldGalv(R), unless otherwise stated. A-3 F-39 tnb07_gm102_F_40_41 1/18/08 9:39 AM Page F-40 Pipe Straps, Conduit Clamps & Hangers Metal Framing, Pipe Hangers and Accessories The New Specification Standard for Heavy-Duty Industrial Applications. NEW! King Cobra(R) Cable and Pipe Clamp with GoldGalv(R) Finish Cobra(R) One-Piece Cable and Pipe Clamp * Superior design load capabilities for industrial applications: 350 lbs. for 12" to 2 12" trade sizes; 450 lbs. for 3" to 4" trade sizes Takes a bite out of your installation time! * One-piece, heavy-duty construction ready to install right out of the box, no need to break apart and re-assemble, no screws or bolts to drop * Durable one-piece, heavy-duty steel construction -- designed specifically for use in industrial applications * Installs quickly and securely using one hand * Embosses on shoulder and hooks increase loading capability and durability, preventing deformation of clamps * Universal bolt head accepts a range of tools * Rugged stirrup provides increased strength for heavier loads, minimizing deflection * Eliminates the guesswork from clamp selection -- one catalog number attaches equal trade sizes of EMT and rigid conduit * Wider saddle design with anti-rotation tabs distributes load evenly over a larger surface area, preventing jacket damage * Parallel hook design keeps conduits and cable square with strut * Increased corrosion protection* -- GoldGalv(R) (yellow zinc dichromate) finish stands up to harsh industrial applications * Reconfigure wiring without complete disassembly. Remove cables easily without disturbing neighboring clamps * Parallel hook design keeps conduit and cable square with strut * Heavy-duty 516" hex bolt * One clamp size works on equal trade sizes for both EMT and rigid conduit, simplifying clamp specification * Compared to conventional electrogalvanization. Cobra(R) King Cobra(R) CAT. NO. FOR EMT AND RIGID CONDUIT TRADE SIZE CABLE O.D. RANGE (IN.) STATIC LOAD LIMIT (LB) SAFETY FACTOR = 4 STD. CTN. 0.650-0.890 0.860-1.110 1.100-1.400 1.400-1.725 1.690-1.980 1.980-2.576 2.576-3.060 3.060-3.626 3.626-4.126 4.126-4.626 350 350 350 350 350 350 350 450 450 450 100 100 100 50 50 50 25 25 25 25 2" 3 4" 1" 114" 112" 2" 212" 3" 312" 4" 1 Standard Finish - GoldGalv(R), unless otherwise stated. F-40 CABLE O.D. RANGE (IN.) STATIC LOAD LIMIT (LB) SAFETY FACTOR = 4 STD. CTN. 0.650-0.890 0.860-1.110 1.100-1.400 1.400-1.725 1.690-1.980 1.980-2.576 2.576-3.060 3.060-3.626 3.626-4.126 4.126-4.626 200 200 200 200 200 200 350 350 350 350 100 100 100 50 50 50 25 25 25 25 Electro-Galvanized Steel GoldGalv(R) Finish KCPC050 KCPC075 KCPC100 KCPC125 KCPC150 KCPC200 KCPC250 KCPC300 KCPC350 KCPC400 CAT. NO. FOR EMT AND RIGID CONDUIT TRADE SIZE CPC050 CPC075 CPC100 CPC125 CPC150 CPC200 CPC250 CPC300 CPC350 CPC400 2" 4" 1" 114" 112" 2" 212" 3" 312" 4" 1 3 Standard Finish - GoldGalv(R), unless otherwise stated. tnb07_gm102_F_40_41 1/18/08 9:39 AM Page F-41 Pipe Straps, Conduit Clamps & Hangers C-108 Universal Pipe Strap -- EZ-Strap * Fits E.M.T., I.M.C., rigid conduit * Size range 12" through 2" * Can be used on 112" or 158" channel * Corrosion resistant GoldGalv(R) hardware finish * Installs directly over conduit for easy installation * One-piece construction means no assembly required * 50% reduction of installation time * Saves inventory dollars * Slotted hex head screw STEEL STRAP THICKNESS 2 4 1 1 14 1 12 2 16 16 16 14 14 14 1 3 ga. ga. ga. ga. ga. ga. O.D. SIZE STD. CTN. 7 8 1 564 11 1 32 1 1116 1 1516 2 1332 100 100 100 50 50 50 C-118 Medium-Duty Cable Clamp Standard Finish: Pre-Galvanized (PG) RIGID COND. EMT COND. STD. CTN. -- -- 3 8 1 2 3 4 1 1 14 112 2 2 12 3 3 12 4 -- -- -- 1 2 3 4 1 1 1 4-1 12 -- 2 2 12 3 3 12 4 100 100 100 100 100 100 100 100 100 25 25 10 10 RIGID COND. EMT COND. STD. CTN. Standard Finish: Pre-Galvanized (PG) Double C128-047PG 0.27-0.47 7.5-12 C128-055PG 0.4-0.55 10-14 C128-070PG 0.5-0.7 13-18 C128-090PG 0.6-0.9 15-23 C118-110PG 0.85-1.1 21.5-29 C118-140PG 1.1-1.4 28-36 C128-175PG 1.4-1.75 35.5-44 -- -- 3 8 1 2 3 4 1 1 14 -- -- -- 1 2 3 4 1 1 14 100 100 100 100 100 100 100 Triple C138-047PG C138-055PG C138-070PG C138-090PG -- -- 3 8 1 2 -- -- -- 1 2 100 100 100 100 CAT. NO. Single C118-047PG C118-055PG C118-070PG C118-090PG C118-110PG C118-140PG C118-175PG C118-200PG C118-250PG C118-300PG C118-370PG C118-410PG C118-460PG O.D. OF CABLE OR PIPE IN. MM 0.27-0.47 0.4-0.55 0.5-0.7 0.6-0.9 0.85-1.1 1.1-1.4 1.4-1.75 1.75-2.0 2.0-2.5 2.5-3.0 2.6-3.7 3.5-4.1 3.9-4.6 7.5-12 10-14 13-18 15-23 21.5-29 28-36 35.5-44 44.5-51 51-63.5 63.5-76 66-95 89-105 99-118 C118 Single Cable Clamp Standard Finish - GoldGalv(R), unless otherwise stated. 0C-118 -- Medium-Duty Cable Clamp CAT. NO. O.D. OF CABLE OR PIPE IN. MM 0.27-0.47 0.4-0.55 0.5-0.7 0.6-0.9 7.5-12 10-14 13-18 15-23 C128 Double Cable Clamp Metal Framing, Pipe Hangers and Accessories CAT. NO. C-108-1/2 C-108-3/4 C-108-1 C-108-1-1/4 C-108-1-1/2 C-108-2 CONDUIT OR PIPE SIZE (EMT, I.M.C., RIGID) * No twisting required to install C188 Triple Cable Clamp Standard Finish - GoldGalv(R), unless otherwise stated. A-3 F-41 tnb07_gm102_F_42_43 1/18/08 9:41 AM Page F-42 Pipe Straps, Conduit Clamps & Hangers CH118 Metal Framing, Pipe Hangers and Accessories Cable Clamps CH118 and CX118 Heavy-Duty Cable Clamp CAT. NO. CH118-055EG CH118-081EG CH118-110EG CH118-125EG CH118-135EG CH118-175PG CH118-205EG CH118-250EG CH118-300EG CH118-375EG CH118-425EG CH118-475EG CX118-081EG CX118-110EG CX118-125EG CX118-135EG CX118-175PG CX118-205EG FIG. NO. EMT SIZE RIGID SIZE CABLE O.D. (IN.) DESCRIPTION STD. CTN. 1 1 1 1 1 1 1 1 1 1 1 1 2 2 2 2 2 2 8 2 3 4 1 1 14 1 12 2 -- 2 12 3 3 12 4 1 2 3 4 1 114 112 2 -- 3 8 1 2 3 4 1 1 14 1 12 2 2 12 3 3 12 4 3 8 1 2 3 4 1 114 112 0.40-0.55 0.50-0.70 0.60-.090 0.85-1.10 1.10-1.40 1.40-1.75 1.75-2.00 2.00-2.50 2.50-3.00 2.60-3.70 3.50-4.10 3.90-4.60 -- -- -- -- -- -- Conduit to strut clamp Conduit to strut clamp Conduit to strut clamp Conduit to strut clamp Conduit to strut clamp Conduit to strut clamp Conduit to strut clamp Conduit to strut clamp Conduit to strut clamp Conduit to strut clamp Conduit to strut clamp Conduit to strut clamp Conduit to strut clamp without saddle Conduit to strut clamp without saddle Conduit to strut clamp without saddle Conduit to strut clamp without saddle Conduit to strut clamp without saddle Conduit to strut clamp without saddle 100 100 100 100 100 100 100 100 25 25 10 10 100 100 100 100 100 100 3 1 Available in double or triple configurations. Example: Double -- CH128-047EG Triple -- CH138-047EG CB118 -- Counter Bed EB118 -- Extended Bed EB118 Extended Bed CB118 Counter Bed CAT. NO. STD. CTN. Counter Bed CB118-047PG CB118-055PG CB118-070PG CB118-090PG CB118-110PG CB118-140PG CB118-175PG CB118-200PG CB118-250PG CB118-300PG F-42 DB118 -- Double Bed CAT. NO. DB118 Double Bed STD. CTN. Extended Bed 100 100 100 100 100 100 100 100 100 100 EB118-047PG EB118-055PG EB118-070PG EB118-090PG EB118-110PG EB118-140PG EB118-175PG EB118-200PG EB118-250PG EB118-300PG 100 100 100 100 100 100 1 1 1 1 CAT. NO. STD. CTN. Double Bed DB118-047PG DB118-055PG DB118-070PG DB118-090PG NOTE: Not Sold in pairs. 1 1 1 1 tnb07_gm102_F_42_43 1/18/08 9:42 AM Page F-43 Pipe Straps, Conduit Clamps & Hangers Cable Clamps (continued) C-755 -- TPE C-755 -- Porcelain Cable Clamps Hole Size 32 25 C-755 C-755-1A C-755-1B C-755-1C C-755-2 C-755-2A C-755-2B C-755-2C C-755-3 C-755-3A C-755-3B C-755-3C C-755-4 C-755-4A C-755-4B C-755-4C C-755-5 C-755-5A C-755-5B C-755-5C C-755-6 C-755-6A C-755-6B C-755-6C C-755-7 C-755-7A C-755-7B C-755-7C C-755-8 C-755-8A C-755-8B C-755-8C C-755-8D C-755-8E C-755-8F HOLE SIZE A STD. CTN. 8 2 5 8 3 4 7 8 1 1 18 1 14 1 38 1 12 1 58 1 34 1 78 2 2 18 2 14 2 38 2 12 2 58 2 58 2 78 3 318 3 14 3 38 3 12 3 58 3 58 3 78 4 4 18 4 14 4 38 4 12 1 916 1 916 1 916 2 5 32 2 5 32 2 5 32 2 5 32 2 58 2 58 2 58 2 58 3 58 3 58 3 58 3 58 4 14 4 14 4 14 4 14 4 58 4 58 4 58 458 5 1316 5 1316 5 1316 5 1316 6 78 6 78 6 78 6 78 6 78 6 78 6 78 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 10 5 5 5 5 5 5 5 3 1 * Non-breakable TPE material * Exceptional chemical resistance * Dielectric strength of 640 volts per mil Hole Size * Stainless Steel Clamps Type 304 or 316 * Electro-Galvanized Steel Clamps with Everdur Nut and Bolt * Flame retardant TPE insulator 25 32 * Excellent UV resistance CAT. NO. C755 1ATP C-755-1B-TP C-755-1C-TP C-755-2-TP C-755-2A-TP C-755-2B-TP C-755-2C-TP C-755-3-TP C-755-3A-TP C-755-3B-TP C-755-3C-TP C-755-4-TP C-755-4A-TP C-755-4B-TP C-755-4C-TP C-755-5-TP C-755-5A-TP HOLE SIZE A 8 1 2 5 8 3 4 7 8 1 1 18 1 14 138 112 158 134 178 2 218 214 238 1.36 1.36 1.36 1.86 1.86 1.86 1.86 2.36 2.36 2.36 2.36 2.86 2.86 2.86 2.86 3.36 3.36 3 CAT. NO. C-755-5B-TP C-755-5C-TP C-755-6-TP C-755-6A-TP C-755-6B-TP C-755-6C-TP C-755-7-TP C-755-7A-TP C-755-7B-TP C-755-7C-TP C-755-8-TP C-755-8A-TP C-755-8B-TP C-755-8C-TP C-755-8D-TP C-755-8E-TP C-755-8F-TP HOLE SIZE A 212 258 234 278 3 318 314 338 312 358 334 378 4 418 414 438 412 3.36 3.36 3.86 3.86 3.86 3.86 4.36 4.36 4.36 4.36 4.86 4.86 4.86 4.86 5.24 5.24 5.24 Metal Framing, Pipe Hangers and Accessories CAT. NO. An easy to use one-piece insulator made from Sarlink 4339D, a flame retardant, high hardness grade TPE polymer that is U.L. listed. The tapered flange of the insulator insures complete isolation and protection of the cable. Options include a Stainless Steel Clamp and hardware or an Electro-Galvanized Clamp with Everdur nut and bolt. Finish - GoldGalv (R) brand with bronze hardware. Also fits 112" wide channel. A-3 F-43 tnb07_gm102_F_44_45 1/18/08 4:23 PM Page F-44 Pipe Straps, Conduit Clamps & Hangers Metal Framing, Pipe Hangers and Accessories Pipe Clamps HS Series Two-Hole Pipe Strap HS Series One-Hole Pipe Straps CAT. NO. HS901 HS902 HS903 HS904 HS905 HS906 HS907 HS908 HS909 HS910 PIPE SIZE STD. CTN. CAT. NO. 2" 4" 1 114" 112" 2 212" 3 312" 4 500 500 500 250 250 125 125 100 75 50 HS100 HS101 HS102 HS103 HS104 HS105 HS106 HS107 HS108 HS109 HS110 1 3 Standard Finish -- Galvanized. PIPE SIZE STD. CTN. 8" 2" 3 4" 1" 114" 112" 2" 212" 3" 312" 4" 500 500 500 500 250 250 50 25 25 25 25 1 SIZE 4 x 24 ga. 4 x 20 ga. 3 4 x 24 ga. 3 4 x 20 ga. 3 3 FINISH STYLE Plain Steel Plain Steel Pre-Galvanized Pre-Galvanized Coils Coils Coils Coils Perforated Hanger Strapping. Standard Finish -- Plain Steel or Galvanized. Carbon steel. Specify size, finish and catalog number. Available in 50' and 100' coils. Carbon steel. Stainless steel sizes available on request. Specify pipe size and catalog number. Standard Finish - GoldGalv(R), unless otherwise stated. Also available in stainless steel. See price list for ordering information. C-720, C-720SS -- Extension Riser Clamp Designed for the support or steadying of vertical pipe risers. It is made of carbon steel and is designed to hold tight to the pipe, transmitting the load to the structure through the ears on each end. When possible, the clamp should be placed under a coupling, hub or lugs welded to the pipe. C-720, C-720SS NOTE: This product is not designed to be supported with rods. Install using the maximum suggested torque values shown in the Technical Section of this catalog. Material: Compliance: Finish: Ordering: F-44 3 Strap 2250 (B, PG), Strap 2450 (B, PG) Carbon Steel. Federal Specification A-A-1192A Type 8, MSS-SP-69 (Type 8) and BSPSS-BS3974. Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Specify catalog number, finish and pipe size. C-720, C-720SS CAT. NO. PIPE SIZE MAX. LOAD A WT. EACH C-720-1/2 C-720-3/4 C-720-1 C-720-1-1/4 C-720-1-1/2 C-720-2 C-720-2-1/2 C-720-3 C-720-3-1/2 C-720-4 C-720-5 C-720-6 C-720-8 C720 10 C-720-12 C-720-14 C-720-16 C-720-18 C-720-20 C-720-24 2" 4" 1" 114" 11 2" 2" 21 2" 3" 31 2" 4" 5" 6" 8" 10" 12" 14" 16" 18" 20" 24" 255 255 255 255 255 255 390 530 670 810 1,160 1,570 2,500 2,500 2,700 2,700 2,900 2,900 2,900 2,900 9 878 878 10 1014 1014 1114 1138 1278 1278 1334 1434 1812 2034 2234 24 26 28 30 34 1.00 1.08 1.08 1.86 1.22 1.30 1.74 1.98 2.14 2.28 3.60 3.68 7.26 11.00 15.94 17.36 29.68 31.64 34.84 50.00 1 3 Standard Finish - GoldGalv(R), unless otherwise stated. tnb07_gm102_F_44_45 1/18/08 4:23 PM Page F-45 Pipe Straps, Conduit Clamps & Hangers Pipe Clamps (continued) CX-725 -- Extended Offset Pipe Clamp The Offset Pipe Clamp is used on pipe lines running at a fixed distance from a wall or floor. The standard clearance is two inches from the O.D. of pipe to the face of the surface. Non-standard clearances can be fabricated upon request. Designed to attach directly to piping where the exact distance between the structure and the pipe cannot be determined until the piping is in place. The extended legs can be modified in the field to suit the location. Legs of longer lengths can be furnished on order. Material: Carbon Steel. Material: Carbon Steel. Load Rating: Up to 650F (343C). Finish: Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG") Ordering: Specify pipe size, catalog number and finish. Standard Finish -- Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify pipe size, catalog number, and finish. A CX-725 A C B C-720L B CAT. NO. C-720L-1/2 C-720L-3/4 C-720L-1 C-720L-1-1/4 C-720L-1-1/2 C-720L-2 C-720L-2-1/2 C-720L-3 C-720L-4 C-720L-5 C-720L-6 C-720L-8 C-720L-10 C-720L-12 CAT. NO. PIPE SIZE MAX. LOAD A B C WT. EACH 2 4 1 1 14 1 12 2 2 12 3 4 5 6 8 10 12 190 190 190 190 190 420 420 420 610 610 870 870 1,050 1,200 27 16 2 34 2 78 3 116 3 316 3 12 3 34 4 116 4 916 5 116 5 58 6 58 7 38 8 38 81 2 8 34 9 14 9 34 10 11 14 11 34 12 78 13 78 15 58 16 34 18 34 21 12 24 78 16 16 7 16 7 16 7 16 9 16 9 16 9 16 9 16 11 16 11 16 11 16 13 16 13 16 1.1 1.3 1.4 1.5 1.6 2.8 2.9 3.2 4.2 6.5 7.2 8.3 12.4 21.0 1 3 7 7 Standard Finish - GoldGalv(R), unless otherwise stated. PIPE SIZE A B WT. EACH 8 2 3 4 1 114 112 2 212 3 4 5 6 8 10 12 14 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 334 334 434 512 578 618 7 712 778 1012 1214 13 1514 1814 2034 21 1.85 1.85 1.85 2.34 2.40 2.45 3.13 4.21 4.47 4.90 4.90 5.32 11.20 13.50 22.00 35.00 CX-725-3/8 CX-725-1/2 CX-725-3/4 CX-725-1 CX-725-1-1/4 CX-725-1-1/2 CX-725-2 CX-725-2-1/2 CX-725-3 CX-725-4 CX-725-5 CX-725-6 CX-725-8 CX-725-10 CX-725-12 CX-725-14 3 1 Standard Finish - GoldGalv(R), unless otherwise stated. Metal Framing, Pipe Hangers and Accessories C-720L -- Offset Pipe Clamp C-720P -- PVC Coated Riser Clamp The C-720P is normally used for the support of uninsulated vertical piping where no movement will occur. PVC coating the contact surface prevents galvanic corrosion with the pipe. Please use our C-720 for carbon steel piping or CT-720 for copper tubing requirements. NOTE: This product is not designed to be supported with rods. Install using the maximum suggested torque values shown in the Technical Section of this catalog. Material: Carbon Steel. Compliance: Federal Specification A-A-1192A Type 8, MSS-SP-69 T1400F / 600C. Finish: Polyvinyl Chloride. Ordering: Specify pipe size and catalog number. PVC Coating 4" 4" C-720P A C-720P CAT. NO. PIPE SIZE MAX. LOAD A WT. EACH C720P-1/2 C-720P-3/4 C-720P-1 C-720P-1-1/4 C-720P-1-1/2 C-720P-2 C-720P-2-1/2 C-720P-3 C-720P-4 2" 4" 1" 114" 112" 2" 212" 3" 4" 225 225 225 225 225 225 390 530 810 938 938 958 10 1038 1034 1114 12 1312 1.30 1.36 1.38 1.95 2.01 2.17 2.29 2.50 3.42 1 3 Standard Finish - GoldGalv(R), unless otherwise stated. A-3 F-45 tnb07_gm102_F_46_47 1/18/08 5:04 PM Page F-46 Pipe Straps, Conduit Clamps & Hangers Metal Framing, Pipe Hangers and Accessories Pipe Clamps CT-720 -- Copper Riser Clamp C-724 -- Ductile Iron Pipe Clamp Normally used for the support of uninsulated vertical tubing where no movement will occur. Please use C-720 for carbon steel piping or C-720P for plastic coating requirements. NOTE: This product is not designed to be supported with rods. Install using the maximum suggested torque values shown in the Technical Section of this catalog. Can be used to secure mechanical joint piping or socket fittings together to prevent separation under pressure either under or above ground, vertically or horizontally. If using in this fashion two (2) W-724 Socket Clamp Washers and Figure 133 Rods are also required, but must be ordered separately. The C-724 may also be used to support and guide vertical Ductile Iron pipe. Material: Materials: Carbon Steel. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG") Ordering: Specify pipe size, catalog number, and finish. Carbon Steel. Compliance: Federal Specification A-A-1192A Type 8, MSS-SP-69 Type 8. Finish: Copper. Ordering: Specify tubing size and catalog number. A A 4" C-724 4" CT-720 CT-720 CAT. NO. CT-720-1/2 CT-720-3/4 CT720 1 CT-720-1-1/4 CT-720-1-1/2 CT-720-2 CT-720-2-1/2 CT-720-3 CT-720-3-1/2 CT-720-4 CT-720-5 CT-720-6 C-724 TUBE SIZE MAX. LOAD 2 4 1 114 1 12 2 2 12 3 3 12 4 5 6 220 220 220 220 220 220 390 530 530 530 810 1,570 1 3 Standard Finish - GoldGalv(R), unless otherwise stated. F-46 A WT. EACH CAT. NO. 9316 9316 912 934 1018 1012 11 1158 1258 1318 14 15 0.70 0.74 0.75 0.77 0.80 0.84 1.60 1.80 1.95 2.04 3.50 5.25 C-724-3 C-724-4 C-724-6 C-724-8 C-724-10 C-724-12 C-724-14 C-724-16 C-724-18 C-724-20 C-724-24 C-724-30 PIPE SIZE ACTUAL PIPE O.D. A WASHER SIZE WT. EACH 3 4 6 8 10 12 14 16 18 20 24 30 3.96 4.8 6.9 9.05 11.1 13.2 15.3 17.4 19.5 21.6 25.8 32 1214 1334 1534 18 2018 2278 2512 28 33 3512 4012 48 4 4 3 4 334 3 4 3 4 114 114 114 112 112 112 9.00 9.00 10.70 12.20 14.60 16.60 41.90 61.90 65.10 92.20 122.70 184.00 Standard Finish - GoldGalv(R), unless otherwise stated. 3 3 tnb07_gm102_F_46_47 1/18/08 5:04 PM Page F-47 Pipe Straps, Conduit Clamps & Hangers Pipe Clamps C-725 -- Two Bolt Pipe Clamp Designed to suspend cold or hot pipe lines where little or no insulation is required. The C-725 is usually used with an E-120-A Weldless Eyenut, or E-157 Welded Eyerod. See Figure 298 Heavy-duty Two Bolt Clamp when higher loads are required. We will also design to meet special requirements such as special pipe sizes. C F E D Rated Loads are for up to 750F (399C). Material: Carbon Steel. Compliance: Federal Specification A-A-1192A Type 4, MSS-SP-69 Type 4 and BSPSS-BS3974. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify catalog number, finish and pipe size. Also, include any special requirements for C-725. C E C-725 C-725 CAT. NO. PIPE SIZE MAXIMUM LOAD 650F/ 343C 750F/ 343C C ROD TAKE OUT D E F WT. EACH C725 1/2 C-725-3/4 C-725-1 C-725-1-1/4 C-725-1-1/2 C-725-2 C-725-2-1/2 C-725-3 C-725-4 C-725-5 C-725-6 C-725-8 C-725-10 C-725-12 C-725-14 C-725-16 C-725-18 C-725-20 C-725-24 C-725-30 2 4 1 114 11 2 2 21 2 3 4 5 6 8 10 12 14 16 18 20 24 30 500 500 500 500 800 1,040 1,040 1,040 1,040 1,040 1,615 1,615 2,490 2,490 2,490 2,490 3,060 3,060 3,060 3,500 445 445 445 445 715 930 930 930 930 930 1,440 1,440 2,220 2,220 2,220 2,220 2,730 2,730 2,730 3,360 8 8 3 8 3 8 3 8 1 2 5 8 5 8 3 4 3 4 7 8 1 1 118 11 8 118 11 4 138 11 2 2 11 8 114 13 8 158 13 4 218 25 8 3 35 8 414 51 4 638 75 8 834 91 4 1014 115 8 1234 151 4 1812 15 8 134 17 8 218 21 4 258 31 8 312 43 8 5 61 4 738 83 4 1014 105 8 1158 13 1418 167 8 2034 8 8 3 8 3 8 3 8 1 2 1 2 1 2 12 1 2 3 4 3 4 7 8 7 8 7 8 7 8 1 118 11 8 112 0.31 0.35 0.39 0.40 0.45 1.23 1.33 1.53 2.20 2.39 5.87 6.95 14.39 16.73 21.26 23.39 32.96 36.74 52.96 103.50 1 3 3 3 3 3 Metal Framing, Pipe Hangers and Accessories D Standard Finish - GoldGalv (R), unless otherwise stated. A-3 F-47 tnb07_gm102_F_48_49 1/18/08 9:40 AM Page F-48 Pipe Straps, Conduit Clamps & Hangers Pipe Clamps Metal Framing, Pipe Hangers and Accessories C-726 -- Three Bolt Pipe Clamp Designed for hot insulated pipe lines up to 750F. The spacer on the top inner bolt provides uniform space for the connecting eyerod or weldless eyenut. We will also design to meet special requirements such as special pipe sizes. Rated Loads are for up to 750F (399C). Material: Carbon Steel. Compliance: Federal Specification A-A-1192A Type 3, MSS-SP-69 Type 3 and BSPSS-BS3974. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify catalog number, and pipe size. Also, include any special requirements. D E B H C-725 C-726 CAT. NO. C-726-1/2 C-726-3/4 C-726-1 C-726--1/4 C-726-1-3/4 C-726-2 C-726-2-3/4 C-726-3 C-726-4 C-726-5 C-726-6 C-726-8 C-726-10 C-726-12 C-726-14 C-726-16 C-726-18 C-726-20 C-726-24 C-726-30 C-726-36 PIPE SIZE 2 4 1 114 134 2 234 3 4 5 6 8 10 12 14 16 18 20 24 30 36 1 3 MAXIMUM LOAD 650F/ 750F/ 343C 399C 950 950 950 950 1,545 1,545 1,545 1,545 2,500 2,500 2,865 2,865 3,240 3,240 4,300 4,300 4,300 4,500 5,490 7,500 1,0500 Standard Finish - GoldGalv (R) unless otherwise stated. F-48 C F 845 845 845 845 1,380 1,380 1,380 1,380 2,230 2,230 2,555 2,555 2,890 2,890 3,835 3,835 3,835 4,015 4,900 6,690 9,360 B C D TAKE OUT E F H WT. EACH 1 1 18 1 12 1 12 1 34 2 14 2 14 2 34 3 38 4 4 34 5 34 6 78 8 38 9 14 10 11 58 12 38 14 34 18 12 22 12 8 8 5 8 3 4 1 1 14 1 14 1 14 1 1 14 1 14 1 14 1 14 1 12 2 2 2 2 2 1 12 3 2 78 3 14 3 34 3 58 4 78 5 78 6 14 6 58 7 58 8 14 9 58 10 58 12 13 14 38 15 58 16 34 17 12 19 78 26 38 32 14 2 14 2 12 2 12 2 78 4 14 5 14 5 38 6 6 12 7 8 14 9 14 10 12 11 12 12 34 14 15 14 15 78 17 78 23 38 28f 8 8 3 8 3 8 5 8 5 8 5 8 5 8 3 4 3 4 7 8 7 8 1 1 1 14 1 14 1 14 1 38 1 12 1 12 1 34 1 58 1 34 2 14 2 14 2 12 2 34 3 3 12 4 12 5 14 6 14 7 14 8 14 9 78 10 34 11 34 13 14 14 16 38 21 26 0.61 0.66 0.69 0.75 2.14 2.43 2.92 3.19 7.12 7.96 11.85 13.59 21.33 23.65 38.78 42.89 46.35 58.67 89.32 140.89 246.44 5 5 3 3 tnb07_gm102_F_48_49 1/31/08 8:53 AM Page F-49 Pipe Straps, Conduit Clamps & Hangers Pipe Clamps A-726 -- Alloy Three-Bolt Pipe Clamp Designed for hot insulated pipelines. The spacer on the top inner bolt provides uniform space for the connecting eyerod or weldless eyenut. Temperature range: above 750F (399C) to 1050F (566C). Chrome Molybdenum Steel, ASTM A-387 Grade 22. Compliance: Federal Specification A-A-1192A Type 3, MSS-SP-69 Type 3 and BSPSS-BS3974. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify catalog number, and pipe size. C F D E B H A-726 A-726 CAT. NO. A-726-3/4 A-726-1 A-726-1-1/4 A-726-1-1/2 A-726-2 A-726-2-1/2 A-726-3 A-726-4 A-726-5 A-726-6 A-726-8 A-726-10 A-726-12 A-726-14 A-726-16 A-726-18 A-726-20 A-726-24 PIPE SIZE 950F/ 510C MAXIMUM LOAD 1000F/ 538C 1050F 566C B C D TAKE OUT E F H WT. EACH 4 1 114 112 2 212 3 4 5 6 8 10 12 14 16 18 20 24 870 870 870 1,400 1,400 1,400 1,400 2,300 2,300 2,600 2,600 3,000 3,000 3,900 3,900 39 5,000 5,500 600 600 600 1,000 1,000 1,000 1,000 1,600 1,600 1,800 1,800 2,100 2,100 2,800 2,800 2,800 3,200 3,500 440 440 440 700 700 700 700 1,100 1,100 1,300 1,300 1,500 1,500 2,000 2,000 2,000 2,000 2,700 1 18 1 14 1 12 1 34 2 18 2 14 2 34 3 38 4 4 34 5 34 6 78 8 38 9 18 10 11 58 12 38 14 34 8 8 3 4 1 1 1 1 1 1 18 1 14 1 14 1 14 1 12 2 2 2 2 1 12 3 3 18 3 34 4 78 5 78 6 18 6 34 7 58 8 18 10 11 12 13 18 14 18 15 18 16 34 17 12 19 78 2 12 2 58 2 78 4 18 5 18 5 38 6 6 12 7 8 58 9 58 10 12 11 58 12 34 14 15 18 15 78 17 78 8 8 3 8 5 8 5 8 5 8 5 8 3 4 3 4 7 8 7 8 1 1 1 14 1 14 1 14 1 18 1 12 1 58 1 34 2 14 2 38 2 34 3 3 12 4 12 5 18 6 18 7 18 8 14 9 78 10 34 11 34 13 14 14 16 38 1.09 1.14 1.23 2.48 2.70 2.76 3.19 7.30 7.96 12.26 14.04 21.33 24.00 38.78 43.13 47.78 58.67 90.82 3 5 5 3 3 Metal Framing, Pipe Hangers and Accessories Material: Standard Finish - GoldGalv (R), unless otherwise stated. A-3 F-49 tnb07_gm102_F_50_51 1/18/08 9:40 AM Page F-50 Pipe Straps, Conduit Clamps & Hangers Pipe Hangers Metal Framing, Pipe Hangers and Accessories C-704 -- Return Line Hook C-704-A -- Return Line Offset Hook D Designed to support light duty pipe lines that run next to walls or beams. C A Material: Carbon Steel. Finish: Finish: Ordering: Specify pipe size and catalog number. A C D WT. EACH CAT. NO. 2 4 1 114 112 2 212 3 312 4 5 6 200 200 200 200 200 200 350 350 350 350 450 450 6932 618 6916 658 61116 7332 71532 758 8132 8916 9 938 5 5 5 5 5 5 5 5 5 5 5 5 9 16 16 9 16 9 16 9 16 9 16 9 16 9 16 9 16 9 16 9 16 9 16 0.51 0.53 0.80 0.83 0.87 0.93 1.16 1.27 1.37 2.19 3.50 4.15 C-704-1/2 C-704-3/4 C-704-1 C-704-1-1/4 C-704-1-1/2 C-704-2 C-704-2-1/2 C-704-3 C-704-3-1/2 C-704-4 C-704-5 C-704-6 3 9 Standard Finish - GoldGalv(R), unless otherwise stated. C-710-1/2 C-710-3/4 C-710-1 C-710-1-1/4 C-710-101/2 C-710-2 C-710-2-1/2 C-710-3 C-710-3-1/2 C-710-4 C-710-5 C-710-6 2 4 1 118 112 2 212 3 312 4 5 6 610 610 610 610 610 610 1,130 1,130 1,130 1,430 1,430 1,940 1 3 F-50 2 4 1 114 112 2 212 3 312 4 5 6 200 200 200 200 200 200 350 350 350 450 450 450 6932 618 6916 658 61116 7332 71532 758 8132 8916 9 938 158 11116 178 2116 2316 258 21116 3 314 358 4316 41116 1 3 Material: D WT. EACH 16 16 9 16 9 16 9 16 9 16 9 16 9 16 9 16 9 16 9 16 9 16 0.53 0.55 0.81 0.84 0.89 0.96 1.26 1.38 1.47 2.39 3.90 4.25 9 9 ROD TAKE OUT E WT. EACH CAT. NO. 8 8 3 8 3 8 3 8 3 8 1 2 1 2 1 2 5 8 5 8 3 4 2 34 2 18 3 3 18 3 14 3 38 4 18 5 4 12 5 38 6 7 3 18 2 34 3 34 4 4 14 4 58 5 58 6 34 6 58 7 34 8 78 10 12 1 78 1 12 2 14 2 14 2 38 3 18 3 18 4 18 3 58 4 38 5 5 78 0.27 0.29 0.33 0.36 0.42 0.52 0.61 0.90 0.99 1.40 2.10 3.00 C-710-7 C-710-8 C-710-10 C-710-12 C-710-14 C-710-16 C-710-18 C-710-20 C-710-24 C-710-30 C-710-36 Carbon Steel (Also available in Stainless Steel as C-710SS). Compliance: Federal Specification A-A-1192A Type 1, MSS-SP-69 Type 1, BSPSSBS3974, U.L. and F.M. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify catalog number, finish and pipe size. C-710 C Standard Finish - GoldGalv(R), unless otherwise stated. B E B 3 A C A 3 MAX. LOAD B Rated Loads are for up to 650F (343C) for carbon steel. Maximum PVC temperature is 140F (60C). MAX. LOAD PIPE SIZE A Designed to support non-insulated, stationary lines from above allowing for approximately 1" to 11 2" of vertical adjustment after the pipe is in place. The lower nut (not furnished) adjusts the pipe line to the proper elevation, the top nut (not furnished) prevents loosening due to vibration, and must be tightened securely to assure proper hanger performance. PIPE SIZE B C-704-A Standard Finish - GoldGalv(R), unless otherwise stated. C-710, C-710F, C-710P, C-710SS CAT. NO. 1" Ordering: Specify pipe size and catalog number. C-704 MAX. LOAD 1 A Standard Finish - GoldGalv(R), Black (add suffix "-B"), ElectroGalvanized (add suffix "-EG"). PIPE SIZE C-704-1/2 C-704-3/4 C-704-1 C-704-1-1/4 C-704-1-1/2 C-704-2 C-704-2-1/2 C-704-3 C-704-3-1/2 C-704-4 C-704-5 C-704-6 5" Designed to support light duty pipe l ines with clearance requirements that run along walls or beams. Material: Carbon Steel. Standard Finish - GoldGalv(R), Black (add suffix "-B"), ElectroGalvanized (add suffix "-EG") CAT. NO. D PIPE SIZE MAX. LOAD A B C ROD TAKE OUT E WT. EACH 7 8 10 12 14 16 18 20 24 30 36 2,000 2,000 3,600 3,800 4,200 4,800 4,800 4,800 4,800 6,000 9,500 4 4 7 8 7 8 1 1 1 14 1 14 1 14 1 14 1 12 7 58 8 12 10 11 18 12 12 15 15 34 17 38 19 58 24 34 32 78 11 34 12 34 15 38 17 12 19 12 23 24 34 27 3 8 31 58 40 34 50 78 6 12 6 34 8 14 9 14 10 58 13 18 13 34 15 14 17 12 21 34 30 5.42 5.25 9.10 11.75 14.25 20.75 23.00 41.50 50.00 68.08 68.68 3 3 Standard Finish - GoldGalv(R), unless otherwise stated. tnb07_gm102_F_50_51 1/18/08 9:40 AM Page F-51 Pipe Straps, Conduit Clamps & Hangers Pipe Hangers (continued) CL-710 -- Light-Duty Clevis Hanger CTL-710 -- Copper Clevis Hanger Designed to support non-insulated, stationary lines from above allowing for approximately 1" to 112" of vertical adjustment after the pipe is in place. The lower nut (not furnished) adjusts the pipe line to the proper elevation, the top nut (not furnished) prevents loosening due to vibration, and must be tightened securely to assure proper hanger performance. Designed to support non-insulated, stationary copper tubing lines from above, allowing for approximately 1" to 112" of vertical adjustment after the tubing is in place. The lower nut (not furnished) adjusts the pipe line to the proper elevation. The top nut (not furnished) prevents loosening due to vibration, and must be tightened securely to assure proper hanger performance. Material: Carbon Steel. Material: Finish: Standard Finish - GoldGalv , Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Compliance: Federal Specification A-A-1192A Type 1, MSS-SP-69 Type 1 and BSPSS-BS3974. Rated Loads are for up to 650F (343C). Ordering: Specify catalog number, finish and pipe size. (R) Carbon Steel. Finish: Copper. Ordering: Specify tubing size and catalog number. A A B B E C E C CTL-710 CL-710 CL-710 CAT. NO. CL710 1/2 CL-710-3/4 CL-710-1 CL-710-1-1/4 CL-710-1-1/2 CL-710-2 CL-710-2-1/2 CL-710-3 CL-710-3-1/2 CL-710-4 CTL-710 PIPE SIZE MAX. LOAD A B C 2 4 1 114 112 2 212 3 312 4 150 250 250 250 250 250 350 350 350 400 8 8 3 8 3 8 3 8 3 8 1 2 1 2 1 2 5 8 178 238 238 278 3 312 4 414 438 512 238 278 378 334 4 434 512 61 8 612 778 1 3 3 3 Standard Finish - GoldGalv(R), unless otherwise stated. E WT. EACH CAT. NO. 3 4 112 158 218 214 234 278 314 338 438 0.27 0.29 0.33 0.36 0.42 0.52 0.81 0.90 0.99 1.40 CTL710 1/2 CTL-710-3/4 CTL-710-1 CTL-710-1-1/4 CTL-710-1-1/2 CTL-710-2 CTL-710-2-1/2 CTL-710-3 CTL-710-3-1/2 CTL-710-4 CTL-710-5 CTL-710-6 PIPE SIZE MAX. LOAD 2 4 1 114 112 2 212 3 312 4 5 6 150 250 250 250 250 250 350 350 350 350 900 900 1 3 A B C ROD TAKE OUT E WT. EACH 8 8 3 8 3 8 3 8 3 8 1 2 1 2 1 2 1 2 5 8 5 8 2 78 2 58 2 58 3 18 3 38 3 38 3 58 3 78 4 18 4 12 5 5 34 3 18 3 3 18 3 34 4 18 4 38 4 7 8 5 38 5 78 6 14 7 34 8 78 2 14 1 78 1 78 2 38 2 58 2 58 2 58 2 78 3 18 3 12 3 78 4 58 0.16 0.16 0.19 0.22 0.29 0.32 0.72 0.82 0.91 1.07 1.76 1.92 3 3 Metal Framing, Pipe Hangers and Accessories Compliance: Federal Specification A-A-1192A Type 1, MSS-SP-69 Type 1. Standard Finish - GoldGalv(R), unless otherwise stated. A-3 F-51 tnb07_gm102_F_52_53 1/18/08 9:37 AM Page F-52 Pipe Straps, Conduit Clamps & Hangers Pipe Hangers (continued) Metal Framing, Pipe Hangers and Accessories ETL-710 -- Light-Duty Clevis Hanger A F C C L OF PIPE ETL-710 -- Light-Duty Clevis Hanger CAT. NO. ETL710 1/2 ETL-710-3/4 ETL-710-1 ETL-710-1-1/4 ETL-710-1-1/2 ETL-710-2 ETL-710-2-1/2 ETL-710-3 ETL-710-3-1/2 ETL-710-4 ETL-710-5 ETL-710-6 TUBING SIZE MATERIAL SIZE A B C E F STD. CTN. 2 4 1 1 14 1 12 2 2 12 3 3 12 4 5 6 16 ga x 78 16 ga x 78 16 ga x 78 16 ga x 78 16 ga x 78 13 ga x 78 1 8 x 1 14 1 8 x 1 14 1 8 x 1 14 1 8 x 1 14 3 16 x 1 14 3 16 x 1 14 8 8 3 8 3 8 3 8 3 8 1 2 1 2 1 2 1 2 5 8 5 8 1 1316 1 34 1 58 2 2 38 2 1116 3 14 3 12 3 34 4 516 5 5 1116 2 316 2 14 2 516 2 34 3 18 4 4 1116 5 316 5 1116 6 12 7 1116 8 78 1 14 1 14 1 18 1 18 1 14 1 12 2 2 14 2 12 3 3 38 4 18 16 16 1 2 11 16 1 1 116 1 18 1 316 1 18 1 316 1 316 1 14 100 100 100 100 100 100 100 100 100 100 50 50 1 3 Standard Finish - GoldGalv(R). Carbon Steel. Copper tube sized. For the suspension of stationary copper tubing lines. Order by Cat. No., tubing size. F-52 B E 3 3 9 9 tnb07_gm102_F_52_53 1/18/08 9:37 AM Page F-53 Pipe Straps, Conduit Clamps & Hangers Pipe Hangers (continued) CX-710 -- Elongated Clevis Hanger CI-710 -- Clevis Hanger for Ductile Iron and A.W.W.A. Cast Iron Pipe Designed for the suspension of insulated stationary pipe lines. It will accommodate 2" of insulation up to 112" pipe, and 4" of insulation for pipe 2" and larger. Designed to support non-insulated, stationary ductile iron and A.W.W.A. cast iron lines from above allowing for approximately 1" to 112" of vertical adjustment after the pipe is in place. The lower nut (not furnished) adjusts the pipe line to the proper elevation. The top nut (not furnished) prevents loosening due to vibration and must be tightened securely to assure proper hanger performance. Hanger locking nut above the clevis must be tightened securely to assure proper hanger performance. The nuts are not included. Rated Loads are for up to 650F (343C). Carbon Steel. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Approvals: Federal Specification A-A-1192A Type 1, MSS-SP-69 Type 1 and BSPSS-BS3974. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify catalog number finish and pipe size. Ordering: Specify pipe size, catalog number and finish. Material: Carbon Steel. Compliance: MSS-SP-69 Type 1, A-A-1192A Type 1. A A F B B E C E C C L CI-710 CX-710 CI-710 CX-710 CAT. NO. CX-710-1/2 CX-710-3/4 CX-710-1 CX-710-1-1/4 CX-710-1-1/2 CX-710-2 CX-710-2-1/2 CX-710-3 CX-710-3-1/2 CX-710-4 CX-710-5 CX-710-6 CX-710-8 CX-710-10 CX-710-12 PIPE SIZE MAX. LOAD 2 4 1 114 112 2 212 3 312 4 5 6 8 10 12 600 600 600 600 600 600 1,100 1,100 1,100 1,400 1,400 1,900 2,000 3,600 3,800 1 3 A B C E F WT. EACH CAT. NO. 8 8 3 8 3 8 3 8 3 8 1 2 1 2 1 2 5 8 5 8 3 4 7 8 7 8 7 8 3 34 4 14 5 18 5 38 5 12 7 58 7 78 8 18 8 38 9 58 10 38 10 78 12 58 13 14 15 34 4 14 4 78 5 34 6 18 6 38 8 34 9 14 9 78 10 38 11 78 13 18 14 18 16 78 18 58 22 18 3 12 3 78 4 34 4 78 5 7 18 7 14 7 12 7 34 8 78 9 58 10 11 58 12 18 14 58 8 8 1 58 1 58 1 12 1 58 1 18 1 18 1 14 1 34 1 78 1 58 2 18 2 38 2 58 0.66 0.70 0.74 0.78 0.81 0.88 1.83 1.97 2.06 2.57 3.00 4.05 6.00 10.10 12.90 CI-710-4 CI-710-6 CI-710-8 CI-710-10 CI-710-12 CI-710-14 CI-710-16 CI-710-18 CI-710-20 CI-710-24 3 3 5 5 PIPE SIZE MAX. LOAD A B C ROD TAKE OUT E WT. EACH 4 6 8 10 12 14 16 18 20 24 1,430 1,940 2,000 3,600 3,800 4,200 4,800 4,800 4,800 4,800 4 8 7 8 7 8 7 8 1 1 1 14 1 14 1 14 5 34 7 9 14 10 14 12 58 14 18 14 78 16 12 18 34 21 78 8 18 10 38 13 34 15 34 19 14 21 34 23 58 26 14 29 12 34 34 4 38 5 12 7 34 8 58 11 12 14 13 14 12 16 12 19 12 2.08 2.78 4.47 8.87 12.0 15.2 23.6 25.9 44.3 53.5 3 7 Metal Framing, Pipe Hangers and Accessories Material: Standard Finish - GoldGalv(R), unless otherwise stated. Standard Finish - GoldGalv(R), unless otherwise stated. A-3 F-53 tnb07_gm102_F_54_55 1/17/08 5:22 PM Page F-54 Pipe Straps, Conduit Clamps & Hangers Pipe Hangers C-711 -- "J" Pipe Hanger Metal Framing, Pipe Hangers and Accessories Standard Finish - GoldGalv(R) brand Complies with Specification MSS SP 58, Type 5. Sizes through 5" conform to Ca. Code Title 24, Div. T22 for Seismic restraint bracing. C-711F -- Felt Lined "J" Pipe Hanger Standard Standard Finish - GoldGalv(R) brand Available in sizes up to 8". C-711P -- Plastic Coated "J" Pipe Hanger Standard Finish - GoldGalv(R) brand Isolates hanger from glass and other piping for corrosion or cushioning purposes. Available in sizes up to 4". Order by Cat. No. and pipe size. Hole provided for side mounting to wall as bracket. A Felt Lined C B F D DIA. E G Plastic Coated CAT. NO. PIPE SIZE A ROD SIZE B C D E F BOLT SIZE G STOCK SIZE MAX. REC. LOADS LBS. STD. CTN. C-711-1/2 C-711-3/4 C-711-1 C-711-1-1/4 C-711-1-1/2 C-711-2 C-711-2-1/2 C-711-3 C-711-3-1/2 C-711-4 C-711-5 C-711-6 C-711-8 2 4 1 1 1 4 1 1 2 2 2 1 2 3 3 12 4 5 6* 8* 8 8 3 8 3 8 3 8 3 8 1 2 1 2 1 2 5 8 5 8 3 4 7 8 2 58 2 78 2 1516 3 1 4 3 916 3 1116 4 716 4 1316 5 18 6 18 6 34 7 34 9 316 1 34 1 78 1 1516 2 2 316 2 1 8 2 716 2 916 2 58 3 316 3 14 3 916 3 1516 16 16 7 16 7 16 7 16 7 16 9 16 9 16 9 16 9 16 9 16 9 16 9 16 1 12 1 1116 1 1316 2 116 2 716 2 916 3 316 3 1 2 3 34 4 58 5 116 5 1316 6 1516 1 1516 2 18 2 516 2 5 8 2 7 8 3 116 3 5 8 4 116 4 38 5 316 5 38 6 58 8 4 4 1 4 1 4 1 4 1 4 3 8 3 8 3 8 3 8 3 8 3 8 3 8 3 532 3 12 3 1116 4 1 8 4 5 8 5 6 6 2132 7 516 8 916 9 2332 11 14 13 1116 12 ga x 34 12 ga x 34 12 ga x 34 12 ga x 34 12 ga x 34 12 ga x 34 12 ga x 1 14 12 ga x 1 14 3 16 x 1 14 3 16 x 1 14 3 16 x 1 14 3 16 x 1 34 3 16 x 1 34 400 400 400 400 400 400 500 500 500 550 550 600 760 50 50 50 50 50 50 25 25 25 10 10 10 8 1 3 3 3 *Hangers 6" and over have hole instead of slot. F-54 7 7 1 1 tnb07_gm102_F_54_55 1/17/08 5:22 PM Page F-55 Pipe Straps, Conduit Clamps & Hangers Pipe Hangers (continued) A C-727, C-727F -- Adjustable Swivel Ring Designed for the support of non-insulated static pipe lines. The swivel nut is knurled to provide a gripping surface when adjusting the pipe elevation. Compliance: Federal Specification A-A-1192A Type 10, MSS SP-69 Type 10, Underwriters Laboratory listed, and Factory Mutual approved ( 34" through 8"). We also offer Swivel Ring hangers that are for Copper Tubing (CT-727), PVC coated (C-727-P) and for NFPA requirements (C-727-NFPA), in this catalog. Carbon Steel. Finish: Standard Finish - Pre-Galv, Black (add suffix "-B"). B D Electro-Galvanized (add suffix "-EG"). Ordering: Specify pipe size, catalog number and finish. C-727 C-727, C-727F CAT. NO. C-727-1/2 C-727-3/4 C-727-1 C-727-1-1/4 C-727-1-1/2 C-727-2 C-727-2-1/2 C-727-3 C-727-3-1/2 C-727-4 C-727-5 C-727-6 C-727-8 Standard Finish: Pre-Galv only. PIPE SIZE MAX. LOAD 2 4 1 1 14 1 12 2 2 12 3 3 12 4 5 6 8 300 300 300 300 300 300 600 600 600 1,000 1,000 1,250 1,800 1 3 A B D E WT. EACH 8 8 3 8 3 8 3 8 3 8 1 2 1 2 1 2 5 8 5 8 3 4 7 8 2 34 2 12 2 12 2 1316 3 18 3 516 3 1116 4 4 516 4 1516 5 58 6 1116 8 516 3 116 3 116 3 316 3 916 3 78 4 38 5 18 5 78 6 58 7 18 8 12 10 18 12 78 1 716 1 18 1 1 116 1 116 1 18 1 14 1 18 1 12 1 14 1 38 2 2 58 0.09 0.10 0.10 0.10 0.11 0.12 0.32 0.35 0.39 0.43 0.65 1.09 1.24 3 3 Metal Framing, Pipe Hangers and Accessories Material: E A-3 F-55 tnb07_gm102_F_56_57 1/17/08 5:09 PM Page F-56 Pipe Straps, Conduit Clamps & Hangers Metal Framing, Pipe Hangers and Accessories Pipe Hangers C-727-P -- PVC Coated Adjustable Swivel Ring C-727-NFPA -- NFPA Swivel Ring Designed for the support of non-insulated static pipe lines and to protect the pipe from coming into direct contact with the hanger by having the contact surface PVC coated. The swivel nut is knurled to provide a gripping surface when adjusting the pipe elevation. Designed for the support of non-insulated static pipe lines. The swivel nut is knurled to provide a gripping surface when adjusting the tubing elevation and is tapped to the reduced rod standards of NFPA. Compliance: Federal Specification A-A-1192A Type 10, MSS SP-69 Type 10, Underwriters Laboratory listed, and Factory Mutual approved ( 34" through 8"). Compliance: Federal Specification A-A-1192A Type 10, MSS SP-69 Type 10, Underwriters Laboratory listed, and Factory Mutual approved ( 34" through 8") and NFPA standards. We also offer Swivel Ring hangers that are for Copper Tubing (CT-727) and for NFPA requirements (C-727-NFPA) in this catalog.Operating temperature should not exceed 140F / 60C. We also offer Swivel Ring hangers that are for standard commercial pipe (C-727), copper tubing (CT-727), and PVC coated (C-727-P), in this catalog. Material: Carbon Steel. Material: Carbon Steel. Finish: Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify pipe size, catalog number and finish. Ordering: Specify pipe size and catalog number. A A E E B D D C-727-P C-727-P C-727-NFPA C-727-P CAT. NO. PIPE SIZE MAX. LOAD A B D E WT. EACH CAT. NO. C727P 1/2 C-727-P-3/4 C-727-P-1 C-727-P-1-1/4 C-727-P-1-1/2 C-727-P-2 C-727-P-2-1/2 C-727-P-3 C-727-P-3-1/2 C-727-P-4 C-727-P-5 C-727-P-6 C-727-P-8 2 4 1 114 112 2 212 3 312 4 5 6 8 300 300 300 300 300 300 600 600 600 1,000 1,000 1,250 1,800 8 8 3 8 3 8 3 8 3 8 1 2 1 2 1 2 5 8 5 8 3 4 7 8 2 34 2 12 2 12 2 1316 3 18 3 516 3 1116 4 4 516 4 1516 5 58 6 1116 8 516 3 116 3 116 3 316 3 916 3 78 4 38 5 18 5 78 6 58 7 18 8 12 10 18 12 78 1 716 1 18 1 1 116 1 116 1 18 1 14 1 18 1 12 1 14 1 38 2 2 58 0.11 0.13 0.13 0.15 0.17 0.18 0.34 0.39 0.42 0.48 0.69 1.13 1.29 C-727-NFPA-1/2 C-727-NFPA-3/4 C-727-NFPA-1 C-727-NFPA-1-1/4 C-727-NFPA-1-1/2 C-727-NFPA-2 C-727-NFPA-2-1/2 C-727-NFPA-3 C-727-NFPA-3-1/2 C-727-NFPA-4 C-727-NFPA-5 C-727-NFPA-6 C-727-NFPA-8 1 3 3 3 Standard Finish - GoldGalv(R), unless otherwise stated. F-56 B PIPE SIZE MAX. LOAD 2 4 1 114 112 2 212 3 312 4 5 6 8 300 300 300 300 300 300 525 525 525 650 1,000 1,000 1,000 1 3 A B D E WT. EACH 8 8 3 8 3 8 3 8 3 8 3 8 3 8 3 8 3 8 1 2 1 2 1 2 2 34 2 12 2 12 2 1316 3 18 3 516 3 11 16 3 3 4 4 516 4 12 5 58 6 12 7 15 16 3 116 3 116 3 316 3 916 3 78 4 38 5 5 916 6 516 7 8 38 9 1316 12 14 1 716 1 18 1 1 116 1 116 1 18 1 14 1 18 1 12 1 58 2 14 2 716 2 58 0.09 0.10 0.10 0.10 0.11 0.12 0.25 0.30 0.33 0.41 0.58 0.92 1.16 3 3 Standard Finish - GoldGalv(R), unless otherwise stated. tnb07_gm102_F_56_57 1/17/08 5:09 PM Page F-57 Pipe Straps, Conduit Clamps & Hangers Pipe Hangers (continued) CT-727 -- Copper Tubing Swivel Ring Designed for the support of non-insulated static copper tubing lines. The swivel nut is knurled to provide a gripping surface when adjusting the tubing elevation. Compliance: Federal Specification A-A-1192A Type 10, MSS SP-69 Type 10. We also offer Swivel Ring hangers that are for carbon steel pipe (C-727), PVC coated (C-727-P), and for NFPA requirements (C-727-NFPA), in this catalog. Carbon Steel. Finish: Copper. Ordering: Specify copper tubing size. CT-727 A CAT. NO. PIPE SIZE MAX. LOAD CT727 1/2 CT-727-3/4 CT-727-1 CT-727-1-1/4 CT-727-1-1/2 CT-727-2 CT-727-2-1/2 CT-727-3 CT-727-3-1/2 CT-727-4 CT-727-5 CT-727-6 2 3 4 1 114 112 2 212 3 312 4 5 6 300 300 300 300 300 300 525 525 525 650 1,000 1,000 1 A B D E WT. EACH 8 3 8 3 8 3 8 3 8 3 8 3 8 1 2 1 2 1 2 1 2 1 2 2 38 2 38 2 12 2 34 2 1516 3 516 4 4 916 4 916 5 916 6 14 7 3 16 3 14 3 18 3 18 3 14 3 58 4 18 4 58 5 916 5 78 6 12 8 38 9 1316 1 1116 1 38 1 1 516 1 18 1 116 1 18 1 516 1 18 1 316 1 58 2 14 0.11 0.11 0.11 0.13 0.13 0.15 0.16 0.32 0.35 0.38 0.58 0.92 3 Standard Finish - GoldGalv unless otherwise stated. (R) ET-727 Copper Sized Adjustable Ring Standard Finish - GoldGalv(R) Barrier for separation of dissimilar metals. Available in sizes 12" through 2". Sized for Copper Tubing. CAT. NO. ET727 1/2 ET-727-3/4 ET-727-1 ET-727-1-1/4 ET-727-1-1/2 ET-727-2 ET-727-2-1/2 ET-727-3 ET-727-3-1/2 ET-727-4 ET-727-5 ET-727-6 TUBING SIZE ROD SIZE A B C STOCK SIZE MAX REC. LOAD LBS. STD. CTN. 2 4 1 1 14 1 12 2 2 12 3 3 12 4 5 6 8 8 3 8 3 8 3 8 3 8 3 8 * 1 2 1 2 1 2* 5 8 5 8 3 18 3 18 3 18 3 14 3 78 4 12 5 12 6 38 6 38 7 38 8 38 9 12 2 34 2 58 2 12 2 12 3 3 38 4 38 4 34 4 12 5 14 5 34 6 38 1 12 1 14 1 1 1 14 1 12 2 2 1 12 2 2 1 18 16 ga x 58 16 ga x 58 16 ga x 58 16 ga x 58 16 ga x 58 16 ga x 58 14 ga x 1316 14 ga x 1316 14 ga x 1316 14 ga x 114 12 ga x 114 12 ga x 114 400 400 400 400 400 400 600 600 600 1,250 1,250 1,250 100 100 100 100 100 100 100 100 50 100 25 25 1 3 3 3 E B D CT-727 Metal Framing, Pipe Hangers and Accessories Material: 2 12" CT filled with water weighs less than 2" IP filled with water, 4" CT less than 3 12" IP with water. 2 12" CT available with 12" thread and 4" CT available with 5 8" thread for Government Specs. Standard Finish - GoldGalv(R), unless otherwise stated. A-3 F-57 tnb07_gm102_F_58_59 1/18/08 4:26 PM Page F-58 Pipe Straps, Conduit Clamps & Hangers Pipe Hangers Metal Framing, Pipe Hangers and Accessories M-718, M-718-B -- Extension Ring Hanger M-718 -- (Rod Tapped - Electro-Galvanized) M-718-B -- (Rod Tapped - Plain Finish) This split ring hanger is designed for the support of non-insulated stationary pipe lines. Also available in a two-screw design. The MT-742-R Ceiling Plate is normally used with this product. A B Material: Malleable Iron. Finish: Standard Finish - EG (silver), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Compliance: Federal Specification A-A-1192A Type 12, MSS-SP-69 Type 12. Ordering: Specify pipe size and catalog number. CAT. NO. M-718-3/8 M-718-1/2 M-718-3/4 M-718-1 M-718-1-1/4 M-718-1-1/2 M-718-2 M-718-2-1/2 M-718-3 M-718-4 M-718 PIPE SIZE MAX. LOAD 8 2 3 4 1 114 112 2 212 3 4 180 180 180 180 180 180 180 480 480 480 3 1 PIPE SIZE A A 4 4 1 4 1 4 1 4 1 4 1 4 1 2 1 2 1 2 ROD SIZE 8 8 3 8 3 8 3 8 3 8 3 8 1 2 1 2 1 2 1 3 1 3 B WT. EACH 16 8 1 118 1716 1516 11116 218 2716 315 0.16 0.17 0.20 0.21 0.29 0.31 0.35 0.57 0.72 1.16 13 7 Standard Finish - EG (silver) MT-718 -- Copper Extension Ring Hanger This split ring hanger is designed for the support of non-insulated copper tubing lines. The MT-718 is furnished tapped for bolt thread and is used with the MT-742-R Ceiling Plate. Also available in a two-bolt design. A Material: Malleable Iron. Finish: Copper. For Electro-Galvanizing please see M-718. Compliance: Federal Specification A-A-1192A Type 12, MSS-SP-69 Type 12. Ordering: B MT-718 CAT. NO. MT718-1/4 MT-718-3/8 MT-718-1/2 MT-718-5/8 MT-718-3/4 MT-718-1 MT-718-1-1/4 MT-718-1-1/2 MT-718-2 MT-718-2-1/2 MT-718-3 Specify tube size and catalog number. TUBE SIZE MAX. LOAD 4 8 1 2 5 8 3 4 1 11 4 11 2 2 21 2 3 180 180 180 180 180 180 180 180 180 480 480 1 3 ROD SIZE A B WT. EACH 8 8 3 8 3 8 3 8 3 8 3 8 3 8 3 8 1 2 1 2 2 2 3 4 3 4 7 8 1 11 4 114 11 2 2 21 4 0.10 0.12 0.13 0.14 0.15 0.16 0.19 0.22 0.27 0.72 1.07 3 3 Standard Finish - GoldGalv(R), unless otherwise stated. F-58 1 1 tnb07_gm102_F_58_59 1/18/08 4:26 PM Page F-59 Pipe Straps, Conduit Clamps & Hangers Pipe Hangers (continued) Seismic Bracing (Consult Superstrut(R) Seismic Hanger bulletin for additional information). 158" 158" 158" 2 38" 238" 1 4" 3 412" 16" 15 11 16" Dia. 16" Dia. (2 Holes) 9 4 12" 412" 4" 1 4" 1 16" Dia. (2 Holes) 9 158" 158" C749N 7/8 Seismic Brace 1,650 lb. load safety factor 3 C749N 5/8 Seismic Brace 1,650 lb. load safety factor 3 C749N Seismic Brace 1,500 lb. load safety factor 3 9 16" Dia. (2 Holes) 158" 2" 3 1116" 13 16" Dia. 4 14" 4" 1 All braces have plastisol coating on the flat member. Plastisol insulates against vibration noise transmission and eliminates rattle at the connection points. 9 16" Dia. (2 Holes) 158" C-749-N-1-1/8 Seismic Brace 1,650 lb. load safety factor 3 Standard Finish-GoldGalv(R) brand. Approved for seismic applications. ES-142 Size: 12" x 114" Bolt Size: 12" Seismic bracing rod stiffener connector S-720 -- Adjustable Pipe Hanger CAT. NO. S720 3/4 S-720-1 S-720-1-1/4 S-720-1-1/2 S-720-2 S-720-2-1/2 S-720-3 S-720-3-1/2 S-720-4 S-720-5 S-720-6 S-720-8 PIPE SIZE 4 1 1 14 1 12 2 212 3 3 12 4 5 6 8 3 ROD SIZE ADJUSTMENT BOLT CENTERS STOCK SIZE 8 8 3 8 3 8 3 8 1 2 1 2 1 2 1 2 5 8 5 8 3 4 1 58 1 12 1 38 1 12 1 12 218 2 14 2 14 2 14 2 14 2 14 2 1 8 4 12 4 12 5 4 12 5 538 6 14 6 34 7 14 8 12 9 12 11 12 16 x 1 14 16 x 1 14 3 16 x 1 14 3 16 x 1 14 1 4 x 1 14 1 4 x 114 1 4 x 1 14 1 4 x 1 14 1 4 x 1 14 1 4 x 1 12 1 4 x 1 12 1 4 x 2 3 3 BOLT SIZE DESIGN LOAD STD. CTN 2-1 14 2-1 14 1 2-1 14 1 2-1 14 1 2-1 14 1 2-114 1 2-1 14 1 2-1 14 1 2-1 14 5 8-1 12 5 8-1 12 3 4-2 550 550 550 550 700 700 1,100 1,100 1,300 1,600 1,600 2,000 10 10 10 10 10 10 10 10 10 10 5 5 3 1 3 1 Metal Framing, Pipe Hangers and Accessories 4" 1 Standard Finish - GoldGalv (R), unless otherwise stated. A-3 F-59 tnb07_gm102_F_60_61 1/18/08 4:22 PM Page F-60 Pipe Straps, Conduit Clamps & Hangers Metal Framing, Pipe Hangers and Accessories PG-794 -- Pipe Alignment Guide Designed to maintain the axial alignment of piping as it expands and contracts during operation. It is most typically installed adjacent to expansion joints and at reasonable distances between the expansion joint and the anchor point. Our Figures 1007 and 1010 also offer alternative means for your piping alignment needs. A B I Note: Guides are not designed to carry dead weight loads. Maximum temperature is 750F. C Material: Carbon Steel. Finish: EG (Silver), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). D Insulation Thickness Ordering: Specify pipe size, insulation thickness, catalog number and finish. Example Catalog Number: PG794 T3-2-1/2 would be 212" pipe with 2" thick insulation. Pipe F G E H Dia. 4 Holes M-718 PG-794 SIZE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 A B C D E F G H WT. EACH 6 34 7 14 8 38 10 38 12 13 14 78 16 78 18 78 22 58 23 58 25 58 28 38 32 18 36 18 4 12 5 58 6 58 8 58 10 34 12 34 14 34 16 34 19 21 23 25 34 29 12 33 12 5 38 6 38 7 38 9 38 11 58 13 58 15 78 17 78 20 22 24 26 58 30 12 34 12 3 18 3 12 4 5 6 14 7 14 8 12 9 12 10 12 11 12 12 12 13 34 15 34 17 34 5 6 34 6 34 7 38 7 38 8 9 34 10 14 11 14 14 18 14 34 15 78 16 38 17 18 1 12 1 12 1 12 1 12 2 2 2 4 4 4 4 4 5 12 5 12 3 3 3 3 4 4 4 6 6 6 6 6 8 8 5 8 8 5 8 5 8 5 8 5 8 3 4 3 4 3 4 7 8 7 8 1 1 1 5.8 7.2 8.2 10.6 15.6 19.5 26.8 35.6 44.2 52.6 66.3 79.7 106.3 116.8 5 Insulation Thickness Table SIZE NUMBER 1 2 3 4 5 6 7 8 9 10 11 12 13 14 1 1 1 4-2 2 12 3-4 5-6 1 1 1 2 1 1 14-2 2 12-3 12 4-5 6 8 10 12 Standard Finish - EG (silver). F-60 THICKNESS OF INSULATION 2 2 1 2 1 1 14-2 12 3-4 5-6 8 10 12 14 16 1-2 2 12-3 12 4-5 6 8 10 12-14 16 3 1 1 14-2 12 3-4 5-6 8 10 12 14 16-18 20 24 4 1 1 14-2 12 3-4 5-6 8 10 12 14-16 18-20 24 PIPE SIZE DIM. I MAX. MVT 1" to 6" 8" to 16" 18" to 24" 4 6 8 4 6 8 PRODUCT DESIGNATION T1 T2 T3 T4 T5 T6 T7 INSULATION THICKNESS 1 1 12 2 2 12 3 3 12 4 FOR PIPE SIZES 2-24 2-24 1 2-24 1 2-24 1 2-24 1 2-24 1 2-24 1 1 Standard Finish - GoldGalv(R), unless otherwise stated. tnb07_gm102_F_60_61 1/18/08 4:22 PM Page F-61 Pipe Straps, Conduit Clamps & Hangers Structure Attachments A M-742-R, M-742-RB, MT-742-R - Single Plate M-742-R -- (Rod Tapped - Electro-Galvanized) M-742-RB -- (Rod Tapped - Plain Finish) MT-742-R -- (Rod Tapped - Copper Finish) B Designed for attaching a rod to a wooden member. This part is normally used in conjunction with ourM-718 Split Ring. Tap Material: Malleable Iron. M-742-R is Carbon Steel. C Ordering: Specify rod size and catalog number. M-742-R Ceiling Flange Standard Finish - Black (B) or EG (Silver). M-742-R, M-742-RB, MT-742-R CAT. NO. M-742-R-3/8 M-742-R-1/2 ROD TAP MAX. LOAD A B 8 2 180 180 2 2 1 1 1 1 3 1 4 4 C WT. EACH 2 2 0.19 0.18 MT-742-R Ceiling Flange Standard Finish - Copper-Colored Epoxy Paint. MT-742-R Rod Sizes: 3 8" & 1 2" C-736-Side Clip -- Steel Bracket Clip Clip can be used to support piping 3 12" or smaller from the horizontal member of a C-736 Steel Bracket. The clip is composed of two steel plates and one bolt and nut. Material: Carbon Steel. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG") Metal Framing, Pipe Hangers and Accessories M-742-R Rod Sizes: 38" & 12" Ordering: Specify size number, catalog number and finish. CAT. NO. C-736-SIDE CLIP-1 C-736-SIDE CLIP-2 ROD SIZE 1 2 MAX. SIZE WT. LOAD EACH 8 1 2 750 750 6.99 10.10 3 Standard Finish - GoldGalv(R), unless otherwise stated. A-3 F-61 tnb07_gm102_F_62_63 1/17/08 5:24 PM Page F-62 Pipe Straps, Conduit Clamps & Hangers Structure Attachments Metal Framing, Pipe Hangers and Accessories C-736 -- Light Welded Steel Bracket Designed to support up to 6" pipe. This bracket is for installation to walls as shown or inverted, and may require a backing plate. Holes for up to 3 4" rods are located at each end of the bracket to allow for use in either orientation. The C-736 Side Clip Steel Bracket Clip can be attached to the C-736 to support piping 312" or smaller. Please see the Figure 79 for more information. Compliance: A-A-1192A Type 31, MSS-SP 69 Type 31. Finish: Ordering: A Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). 1" 11 4" 1" B Specify size number, catalog number and finish. C-736 CAT. NO. C-736-1 C-736-2 C-736-3 ROD TAP MAX. LOAD A B C WT. EACH 1 2 3 750 750 750 9 13 19 8 12 18 6 1 2 10 1 2 16 1 2 6.99 10.10 10.50 A C 13 16" TYP (3) PLCS. D 1" 2" Standard Finish - GoldGalv , unless otherwise stated. (R) C-736 C-739-H -- Heavy Welded Steel Bracket F K L Designed to support pipe from either above or below. Slotted construction allows for drop rod use along the length of the bracket. This bracket is for bolted installation to walls and may require a backing plate. Special steel brackets can be fabricated to customers loads and/or dimensions. Compliance: A-A-1192A Type 33, MSS-SP 69 Type 33. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: L A E One Bolt Hole in Size 0 Bracket H B C G J D 1" 2" 1 L C-739-H Specify size number, catalog number and finish. C-739-H F-62 CAT. NO. SIZE MAX. LOAD A B C D E F G H C-739-H-0 C-739-H-1 C-739-H-2 C-739-H-3 C-739-H-4 C-739-H-5 0 1 2 3 4 5 3,000 3,000 3,000 3,000 3,000 3,000 12 18 24 30 36 42 18 24 30 36 42 50 15 1 4 21 3 8 27 12 33 1 4 39 46 1 1 2 1 1 2 1 12 1 58 1 12 1 12 2 34 2 34 2 34 3 3 3 1 2 4 12 5 5 6 6 7 1 12 1 12 1 12 2 2 2 12 2 2 2 12 2 12 3 12 3 12 J K L WT. EACH 4 8 3 8 3 8 3 8 3 8 NA 23 4 2 12 2 12 3 12 3 12 16 16 1 116 1 116 1 116 1 116 25.1 44.8 60.7 98.1 129.4 177.2 1 3 13 13 tnb07_gm102_F_62_63 1/17/08 5:24 PM Page F-63 Pipe Straps, Conduit Clamps & Hangers Structure Attachments (continued) A L L C-739-M-Medium Welded Steel Bracket E Designed to support pipe from either above or below. Slotted construction allows for drop rod use along the length of the bracket. This bracket is for bolted installation to walls and may require a backing plate. Special steel brackets can be fabricated to customer's loads and/or dimensions. A-A-1192A Type 32, MSS-SP 69 Type 32. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify size number, catalog number and finish. C G 1" C-739-M C-739-M CAT. NO. SIZE MAX. LOAD A B C D E G C-739-M-0 C-739-M-1 C-739-M-2 0 1 2 1,500 1,500 1,500 12 18 24 18 24 30 15 1 2 21 1 2 27 1 2 1 1 4 1 1 4 1 1 4 2 1 2 2 1 2 2 1 2 1 1 4 1 1 2 1 1 2 Standard Finish - GoldGalv(R), unless otherwise stated. PG-795 -- Pipe Block 8" 7 Standard Finish -- Black (B). 1 12" 16" Dia. 7 L WT. EACH 16 16 13 16 15.50 24.70 37.70 13 13 Metal Framing, Pipe Hangers and Accessories Compliance: D B A-3 F-63 tnb07_gm102_F_64_65 1/17/08 5:19 PM Page F-64 Pipe Straps, Conduit Clamps & Hangers Pipe Attachments Metal Framing, Pipe Hangers and Accessories H-115, H-115SS -- Standard U-Bolt Our standard U-Bolts are recommended for use as supports or guides for piping. They are supplied with four hex nuts. The H-115SS is recommended for support of stainless steel piping. Please specify the grade of stainless steel you require when ordering. Load Ratings shown are for Carbon Steel. PVC coating should not exceed 140F / 60C. D Materials: A Carbon Steel, Stainless Steel. B E Compliance: Federal Specification A-A-1192A Type 24, MSS-SP 69 Type 24, and BSPSS-BS3974. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Side loads are given for the H-115 for a maximum temperature of 650F / 343C. When the loading condition requires the simultaneous application of a normal load and side load, the following interaction equation must be used to determine if the H-115 can be used. H-115 (Actual Load / Maximum Design Load) + (Actual Side Load / Maximum Side Load). The result of this equation cannot exceed the value of 1.0 if the H-115 is to be used. Ordering: CAT. NO. H-115-1/2 H-115-3/4 H-115-1 H-115-1/2 H-115-3/4 H-115-1 H-115-1-1/4 H-115-1-1/2 H-115-2 H-115-2-1/2 H-115-3 H-115-3-1/2 H-115-4 Specify pipe size, catalog number and finish. PIPE SIZE 650F/ 343C MAX. LOAD 750F/ 399C 2 4 1 1 2 3 4 1 114 112 2 212 3 312 4 485 485 485 1,200 1,200 1,200 1,220 1,220 1,220 2,260 2,260 2,260 2,260 435 435 435 1,070 1,070 1,070 1,090 1,090 1,090 2,020 2,020 2,020 2,020 1 3 MAX. SIDE LOAD 650F/ 343C 63 63 63 316 240 186 194 194 194 184 184 184 184 A B C D E WT. EACH 4 4 1 4 3 8 3 8 3 8 3 8 3 8 3 8 1 2 1 2 1 2 1 2 1 38 1 18 1 38 1 38 1 18 1 38 1 34 2 2 12 3 3 58 4 18 4 58 1 18 1 38 1 58 1 14 1 12 1 34 2 18 2 38 2 78 3 12 4 18 4 58 5 18 2 34 2 34 2 34 2 34 2 34 2 34 2 78 3 3 14 3 34 4 4 12 4 12 2 18 2 18 2 18 2 18 2 18 2 18 2 18 2 12 2 12 3 3 3 3 0.11 0.12 0.12 0.16 0.16 0.19 0.28 0.30 0.33 0.70 0.78 0.84 0.90 1 1 HL-115 -- Light-Duty U-Bolt CAT. NO. Recommended for the guiding, anchoring and supporting of conduit or light piping loads. Furnished with two (2) hex nuts. Compliance: Federal Specification A-A-1192A (Type 24), MSS-SP 69 (Type 24), and BSPSS-BS3974. Material: Carbon Steel. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify pipe size, catalog number and finish. D E B C HL-115 F-64 A HL-115-1/2 HL-115-3/4 HL-115-1 HL-115-1-1/4 HL-115-1-1/2 HL-115-2 HL-115-2-1/2 HL-115-3 HL-115-3-1/2 HL-115-4 HL-115-5 HL-115-6 HL-115-8 HL-115-10 PIPE SIZE MAX. LOAD 2 4 1 1 14 1 12 2 2 12 3 3 12 4 5 6 8 10 485 485 485 485 485 485 1,220 1,220 1,220 1,220 1,220 2,260 2,260 3,620 1 3 A 4 4 1 4 1 4 1 4 1 4 3 8 3 8 3 8 3 8 3 8 1 2 1 2 5 8 1 1 B C 1 1 14 1 18 1 38 1 38 1 58 1 34 2 2 2 14 2 12 2 34 3 3 38 3 58 4 4 18 4 12 4 58 5 5 58 6 6 34 7 14 8 34 9 14 10 78 11 12 D E WT. EACH 2 2 18 2 14 2 38 2 12 2 34 3 18 3 38 3 58 3 78 4 58 5 18 6 18 7 14 1 34 1 34 1 34 1 34 1 34 1 34 2 2 2 2 2 14 2 14 2 14 2 12 0.06 0.07 0.07 0.08 0.09 0.10 0.28 0.31 0.35 0.38 0.45 0.95 1.20 2.30 tnb07_gm102_F_64_65 1/17/08 5:19 PM Page F-65 Pipe Straps, Conduit Clamps & Hangers Beam Attachments M-750 -- Side Beam Bracket G Designed for bolted connections. Compliance: A-A-1192A Type 34 and MSS-SP 69 Type 34. Material: Malleable Iron (Maximum Temperature 450F / 232C). Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify rod size and catalog number. ROD SIZE M-750-3/8 M-750-1/2 M-750-5/8 MAX. LOAD WITH WITH BOLT LAG SCREW TO STEEL 8 2 5 8 390 640 760 3 1 610 1,130 1,810 F D C D 8 4 7 8 1 716 1 78 2 18 5 3 F G WT. EACH 16 16 3 4 7 8 1 316 1 716 0.26 0.54 0.94 7 9 Metal Framing, Pipe Hangers and Accessories CAT. NO. F C M-750 M-762 -- Side Beam Connector Designed for use on buildings of wood construction. They can be secured to the side of beams or joists by means of our Figure 166 Drive Screws (ordered separately). Material: Malleable Iron. Finish: C Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). A Ordering: Specify size, catalog number, and finish. CAT. NO. M-762-3/8 M-762-1/2 M-762-1/4 SIZE MAX. LOAD A 8 rod 2 rod 1 4 pipe 250 480 250 2 38 2 34 2 34 3 1 B C WT. EACH 3 4 4 3 4 3 3 3 4 4 3 4 0.13 0.25 0.25 B M-762 C-747 -- Adjustable Beam Attachment D For attachment to timber with coach screws or to the bottom of beams with bolts. C F E B A CAT. NO. ROD SIZE A HOLE SIZE B C D E F 8B 2B 5 8B 3 4B 7 8B 16 16 11 16 13 16 15 16 2 34 3 18 3 18 3 1116 3 34 3 78 4 34 4 34 6 14 6 38 4 78 6 6 7 34 8 14 16 16 9 16 11 16 13 16 2 18 2 516 2 316 2 916 2 12 C747-3/8 B C-747-1/2B C-747-5/8B C-747-3/4B C-747-7/8B 3 1 7 9 7 9 STOCK SIZE DESIGN LOAD STD. CTN. 4 x 1 14 8 x 1 12 3 8 x 1 12 1 2 x 2 1 2 x 2 610 1130 1810 2710 3770 50 50 50 50 50 1 3 Standard Finish - GoldGalv(R), unless otherwise stated. Standard Finish -- Black (B). Order by Cat. No., rod size. A-3 F-65 tnb07_gm102_F_66_67 1/17/08 5:21 PM Page F-66 Pipe Straps, Conduit Clamps & Hangers Metal Framing, Pipe Hangers and Accessories Rods and Rod Attachments F-112 -- Turnbuckle M-129 -- Extension Piece Used to connect right and left hand threaded rods together and provide for adjustment. Designed for attaching rods to the M-732-EXT Clamp and similar types of attachments. Material: Material: Forged Steel. Compliance: Federal Specification A-A-1192A Type 13, MSS-SP 69 Type 13, and BSPSS-BS3974. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify catalog number, finish and rod size. Ordering: Specify rod size, catalog number and finish. A H C 3" Rod Take Out B 6" B A M-129 F-112 F-112 M-129 CAT. NO. ROD SIZE MAX. LOAD 650F/ 343C B WT. EACH F-112-3/8 F-112-1/2 F-112-5/8 F-112-3/4 F-112-7/8 F-112-1 F-112-1-1/4 F-112-1-1/2 F-112-1-3/4 F-112-2 F-112-2-1/4 F-112-2-1/2 8 1 2 5 8 3 4 7 8 1 1 14 1 12 1 34 2 2 14 2 12 610 1,130 1,810 2,710 3,370 4,960 8,000 11,630 15,700 20,700 27,200 33,500 7 18 7 12 7 78 8 14 8 58 9 9 18 9 34 10 38 11 12 78 13 12 0.30 0.60 1.00 1.20 1.90 2.50 3.80 5.70 8.20 14.20 27.00 33.00 3 Standard Finish - GoldGalv(R), unless otherwise stated. F-66 Malleable Iron. Compliance: Federal Specification A-A-1192A Type 30, MSS-SP-69 Type 30 when used with a Figure 82. CAT. NO. M-129-3/8 M-129-1/2 M-129-5/8 M-129-3/4 M-129-7/8 ROD SIZE MAX. LOAD B C 8 2 5 8 3 4 7 8 610 1,130 1,810 2,710 2,950 1 14 1 38 1 12 1 34 1 78 2 18 2 38 2 12 2 78 3 3 1 Standard Finish - GoldGalv(R), unless otherwise stated. G H WT. EACH 2 8 5 8 5 8 3 4 2 2 1 2 1 2 9 16 0.20 0.40 0.44 0.65 0.78 1 5 1 1 tnb07_gm102_F_66_67 1/17/08 5:21 PM Page F-67 Pipe Straps, Conduit Clamps & Hangers Structure Attachments C-780 W/OB, C-780 W/HWB -- Welded Beam Attachment Recommended for attachment to the bottom of beams when little or no pipe movement is expected. C-780 W/HWB is recommended for attachment to the bottom of beams, when pipe movement is expected. A bolt & nut or pin is supplied. A pin with cotters is normally supplied for rod sizes over 1". S E C Material: Carbon Steel. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify catalog number, rod size and finish. Rod Size A E1 C R S H C-780 C-780 W/OB, C-780 W/HWB CAT. NO. ROD SIZE MAX. LOAD 650F/ BOLT OR 343C PIN SIZE C-780-3/8 C-780-1/2 C-780-5/8 C-780-3/4 C-780-7/8 C-780-1 C-780-1-1/4 C-780-1-1/2 C-780-1-3/4 C-780-2 C-780-2-1/4 C-780-2-1/2 C-780-2-3/4 C-780-3 C-780-3-1/4 C-780-3-1/2 8 1 2 5 8 3 4 7 8 1 1 14 1 12 1 34 2 2 14 2 12 2 34 3 3 14 3 12 610 1,130 1,810 2,710 3,770 4,960 8,000 11,600 15,700 20,700 27,200 33,500 41,580 50,580 71,280 71,280 3 2 5 8 3 4 7 8 1 118 1 38 1 58 1 78 2 14 2 12 2 12 3 3 14 3 12 3 34 1 C 2 78 2 78 2 78 3 18 4 14 4 12 5 5 12 7 34 8 14 9 34 9 34 9 34 10 14 11 12 12 ROD TAKEOUT ROD TAKEOUT C-780 W/OB C-780 W/HWB E E1 1 78 1 34 1 34 1 18 2 58 3 2 2 12 2 34 N/A N/A N/A N/A N/A N/A N/A 2 2 2 2 3 3 12 3 4 5 5 6 14 6 14 5 34 6 14 7 7 12 H R S 16 11 16 13 16 1 1516 1 18 1 14 1 12 1 34 2 2 38 2 58 2 78 3 18 3 38 3 58 3 78 8 7 8 7 8 1 18 1 14 1 12 2 2 12 2 34 3 14 3 12 3 34 4 4 4 12 4 12 1 14 1 14 1 14 2 18 2 18 2 78 3 3 3 34 3 34 3 34 3 34 3 34 3 34 4 14 4 14 9 7 WT. EACH C-780 W/OB C-780 W/HWB W/O B&N W B&N 0.96 0.96 0.96 1.90 2.50 4.30 8.10 15.60 18.70 -- -- -- -- -- -- -- 1.20 1.20 1.60 2.80 3.90 6.30 10.20 19.00 24.20 30.60 36.80 39.70 39.70 49.00 67.60 79.30 Metal Framing, Pipe Hangers and Accessories Compliance: 3Federal Specification A-A-1192A Type 22, MSS SP-69 Type 22 and BSPSS-BS3974. A-3 F-67 tnb07_gm102_F_68_69 1/18/08 4:26 PM Page F-68 Pipe Straps, Conduit Clamps & Hangers Beam Clamps A Metal Framing, Pipe Hangers and Accessories C-755 -- Beam Clamp Designed to attach to the bottom of flanged beams. Normally used with the E-157 Eye Rod or E-120-A Eye Nut. B D Material: Carbon Steel. Compliance: Federal Specification A-A-1192A Type 21, MSS-SP-69 Type 21. C Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), ElectroGalvanized (add suffix "-EG"), Thermoplastic (add suffix "-TP"). C-755 Ordering: Specify clamp size, flange width, flange thickness, catalog number and finish. CAT. NO. C-755-1 C-755-2 C-755-3 C-755-4 C-755-5 C-755-6 C-755-7 CAT. NO. CLAMP SIZE C-755-1 C-755-2 C-755-3 C-755-4 C-755-5 C-755-6 C-755-7 1 2 3 4 5 6 7 C-755 CLAMP SIZE MAX. LOAD B C D 1 2 3 4 5 6 36 500 700 800 1,000 3,000 3,000 5,000 8 1 18 11 4 1 38 1 58 2 2 18 2 8 5 8 3 4 7 8 1 1 18 1 12 13 4 2 2 38 2 58 3 4 18 2 3 4 WEIGHT EACH BEAM WIDTH -- DIMENSION "A" 5 .52 .74 1.26 -- -- -- -- .62 .82 1.49 2.32 3.40 -- -- .78 1.09 1.89 2.85 4.08 6.00 -- .88 1.21 2.12 3.18 4.52 6.45 11.95 7 1 5 BOLT SIZE 8 2 1 2 5 8 3 4 7 8 1 3 1 6 7 8 10 .95 1.31 2.29 3.39 4.80 7.00 12.75 -- 1.39 2.45 3.60 5.10 7.40 13.55 -- -- 2.69 3.92 5.51 7.90 14.35 -- -- -- -- 6.23 8.80 15.95 C-769 -- Top or Side Beam Clamp The C-769 clamp is made in two parts. When bolted together, they prevent the movement of the clamp from its position. The supporting rod is installed close to the flange of the beam. Material: A Carbon Steel. Compliance: Federal Spec. A-A-1192A Type 25, MSS-SP-69 Type 25. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG") Ordering: Specify clamp number, width of flange, thickness of flange, catalog number and finish. B C C-769 F-68 CAT. NO. CLIP NO. MAX. LOAD ROD SIZE A C-769-1 C-769-2 C-769-3 C-769-4 C-769-5 1 2 3 4 5 300 500 700 1,000 2,000 8 2 5 8 3 4 7 8 3 1 B C 4 102 16 8 7 16 1 2 9 16 1 34 2 14 2 12 2 34 3 12 0.92 1.39 2.53 3.90 7.35 5 3 WT. EACH WIDTH OF I BEAM FLANGE 6 8 152 203 1.04 1.56 2.81 4.32 8.08 1.12 1.66 2.98 4.57 8.48 12 305 1.45 2.11 3.72 5.62 10.13 tnb07_gm102_F_68_69 1/18/08 4:26 PM Page F-69 Pipe Straps, Conduit Clamps & Hangers Beam Clamps (continued) Beam Flange Width M-732-H -- Steel Beam Clamp with Weldless Eyenut The M-732-H beam clamp with eyenut is used when welding to the structure is prohibited for supports where some movement is expected. The clamping effect is produced by the "ice tong" action of the arms and is locked in place by the through bolt located just under the beam flange. E Material: Carbon Steel with Forged Steel Eyenut. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify catalog number, rod size, clamp number and finish. A M-732-H M-732-H CAT. NO. M-732-H-1 M-732-H-2 M-732-H-3 M-732-H-4 M-732-H-5 M-732-H-6 M-732-H-7 M-732-H-8 CAT. NO. M-732-H-1 M-732-H-2 M-732-H-3 M-732-H-4 M-732-H-5 M-732-H-6 M-732-H-7 M-732-H-8 CLAMP SIZE 1 2 3 4 5 6 7 8 CLAMP SIZE MAX. LOAD MAX. ROD SIZE A BEAM WIDTH 1 2 3 4 5 6 7 8 2,710 4,960 4,960 4,960 4,960 11,500 11,500 11,500 4 1 1 1 1 112 112 2 3-8 3-8 4-11 4-12 11-15 4-12 11-15 4-12 3 BODY SIZE MAX. FLANGE THICKNESS WT. EACH 32 32 27 32 29 32 1 64 29 32 1 64 29 32 0.6 0.6 0.6 1.03 1.03 1.03 1.03 1.03 5.5 5.5 9.0 29.0 33.3 29.0 33.3 29.0 25 25 BODY SIZE 3 4 5 6 7 8 9 10 11 12 13 14 15 32 25 32 27 32 27 32 1 64 3 8 1 64 3 8 5 316 5 316 -- -- -- -- -- -- 5 18 5 18 8 14 8 58 -- 8 58 -- 11 58 5 5 8 18 8 58 -- 8 58 -- 11 12 4 1316 4 1316 8 18 8 12 -- 8 12 -- 11 12 4 38 4 38 7 78 8 38 -- 8 38 -- 11 38 3 1516 3 1516 7 78 8 18 -- 8 18 -- 11 18 -- -- 7 38 7 78 -- 7 78 -- 10 78 -- -- 7 7 58 -- 7 58 -- 10 78 -- -- 6 12 7 9 12 7 9 78 10 12 -- -- -- 6 78 9 14 6 78 9 12 10 -- -- -- -- 8 78 -- 9 18 -- -- -- -- -- 8 38 -- 8 78 -- -- -- -- -- 7 78 -- 8 18 -- 25 Metal Framing, Pipe Hangers and Accessories Compliance: Federal Specification A-A-1192A Type 28, MSS-SP-69 Type 28 and BSPSS-BS3974. A-3 F-69 tnb07_gm102_F_70_71 1/17/08 5:26 PM Page F-70 Pipe Straps, Conduit Clamps & Hangers Beam Clamps Metal Framing, Pipe Hangers and Accessories M-732-EXT -- Adjustable Beam Clamp F-70 Designed to attach to the bottom of flanged beams without requiring welding. Normally used with the M-129 Extension Piece (not furnished) up to a maximum 7 8" (M20) rod diameter. Loading is achieved through the clamp jaws while locking is accomplished by tightening the through-bolt located directly below the flange. Maximum flange thickness is 0.60 inches. A Material: Malleable Iron. Compliance: Federal Specification A-A-1192A Type 30, MSS-SP-69 Type 30 when used with a Figure 157. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify catalog number, and finish. Order M-129 separately if required. M-732-EXT M-732-EXT CAT. NO. M-732-EXT-3/8 M-732-EXT-1/2 M-732-EXT-5/8 M-732-EXT-3/4 M-732-EXT-7/8 MAX. ROD SIZE MAX. LOAD 2C 60 3 76 8 2 5 8 3 4 7 8 610 1,130 1,365 1,365 1,365 3 12 3 12 3 12 3 12 3 12 3 716 3 716 3 716 3 716 3 716 3 1 ROD TAKE OUT BEAM FLANGE WIDTH -- B 4 5 101 127 3 516 3 516 3 516 3 516 3 516 2 1516 2 1516 2 1516 2 1516 2 1516 6 152 7 177 WT. EA. 2 916 2 916 2 916 2 916 2 916 1 78 1 78 1 78 1 78 1 78 1.91 2.11 2.15 2.36 2.49 tnb07_gm102_F_70_71 1/17/08 5:26 PM Page F-71 Pipe Straps, Conduit Clamps & Hangers Rollers, Shields and Saddles C-728 -- Pipe Roller (Pair) C728H -- Pipe Roller Assembly (Pair) Cast aluminum roller, steel brackets. Order separately for each pair of rollers: * Cast aluminum rollers, steel brackets Two 12" x 516" hex head cap screws Two 12" channel nuts * Designed for standard saddles Adjustable to fit O.D. pipe 6" through 18". * Space to fit O.D. of pipe and wrapping A B 2-122" " * Adjustable for radius up to 8" 1 A 2 B CAT. NO. CAT. NO. C28 C728 A MAX OS RADIUS 3 38 4 58 6 38 8 12 B DESIGN LOAD STD. CTN. 6 34 7 12 8 12 9 916 2,350 2,350 2,350 2,350 5 pair (10 pieces) 5 pair (10 pieces) 5 pair (10 pieces) 5 pair (10 pieces) C728H C-728-H PIPE SIZE A B DESIGN LOAD STD. CTN. 6 8 10 12 14 16 18 10 1316 111316 1278 1378 1412 1512 1612 6 916 738 8516 9316 934 1058 11716 3,920 3,920 3,920 3,920 3,920 3,920 3,920 5 pair (10 pieces) 5 pair (10 pieces) 5 pair (10 pieces) 5 pair (10 pieces) 5 pair (10 pieces) 5 pair (10 pieces) 5 pair (10 pieces) CR-729 -- Roller Support Used on steam or hot water systems where pipe is to be supported in tunnels, trenches, structural brackets and frames. Adjustment is made by raising and lowering the top nut on the legs and locked into position by tightening the lower nut. CR-729 Material: Steel Axle, Cast Iron Roll. Finish: C Ordering: Specify pipe size, catalog number and finish. E Standard Finish - GoldGalv(R), unless otherwise stated. D CR-729 H A CR-729 PIPE SIZE OF ROLL 4 5 6 7 8 10 12 14 16 C-789 C-789A Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Metal Framing, Pipe Hangers and Accessories * Order separately for each pair of rollers: Two 12" x 5 16" hex head cap screws, two 12" channel nuts C-789B C-789C 1" COV. 25 1 1 2" COV. 38 2" COV. 51 2 1 2" COV. 64 2 12-3 3 12 4-5 6 8 -- 10 12 14 2-2 12 -- 3-3 12 4-5 6 8 10 12 14 -- -- 2-2 12 3-4 5 6 8 10 12-14 -- -- -- 2-2 12 3-3 12 4-5 6 8 10 CAT. NO. C-789D C-789E 3" COV. 76 4" COV. 100 -- -- -- 2-2 12 3-3 12 4-5 6-8 -- 8 -- -- -- -- -- -- 4-6 -- 8 CR-729-2 CR-729-2-1/2 CR-729-3 CR-729-3-1/2 CR-729-4 CR-729-5 CR-729-6 CR-729-8 CR-729-10 CR-729-12 CR-729-14 CR-729-16 PIPE SIZE MAX. LOAD A C D E 2 2 12 3 312 4 5 6 8 10 12 14 16 300 600 600 600 700 700 1,000 1,300 1,700 2,300 3,075 3,075 4 12 5 5 78 7 7 8 12 10 12 14 16 17 19 1 58 1 516 2 14 2 58 2 1316 3 716 4 116 5 18 6 14 7 716 8 34 9 716 3 34 4 12 4 12 4 12 4 12 4 12 4 12 5 14 5 12 6 7 8 1 316 1 38 1 716 1 58 1 1116 2 2 38 2 34 3 38 3 1516 4 34 5 116 H WT. EACH 8 2 1 2 1 2 1 2 5 8 3 4 7 8 7 8 7 8 1 1 0.79 1.44 1.62 1.64 1.82 2.90 4.66 7.29 10.23 12.27 21.39 27.76 3 1 A-3 F-71 tnb07_gm102_F_72_73 1/18/08 4:24 PM Page F-72 Pipe Straps, Conduit Clamps & Hangers Pipe Rolls A Metal Framing, Pipe Hangers and Accessories C-729 -- Harvard Roll Hanger Designed to support piping lines from above, allowing for vertical adjustment and axial movement in the piping. The lower nut (not furnished) adjusts the pipe line to the proper elevation. The top nut (not furnished) prevents loosening due to vibration, and must be tightened securely to assure proper hanger performance. Material: Carbon Steel frame with a Cast Iron Roll. Do not exceed 450F / 232C at the contact point to the roll. B Compliance: A-A-1192A Type 43 and MSS-SP-69 Type 43. Finish: CL Black (add suffix "-B"), Electro-Galvanized (add suffix "-HDG"). D For pipe with insulation and a pipe covering protection saddle the C-729 will have to be oversized to suit. Please see the table below showing the correct sizing for insulated pipe. Ordering: Specify pipe size, catalog number and finish. C C-729 C-729 CAT. NO. C-729-2 C-729-2-1/2 C-729-3 C-729-3-1/2 C-729-4 C-729-5 C-729-6 C-729-7 C-729-8 C-729-10 C-729-12 C-729-14 C-729-16 C-729-18 C-729-20 C-729-24 PIPE SIZE MAX. LOAD ROD SIZE A B C D E WT. EACH 2 212 3 312 4 5 6 7 8 10 12 14 16 18 20 24 150 225 310 390 475 685 780 780 780 965 965 1,200 1,400 1,400 1,600 1,800 2 1 2 1 2 1 2 5 8 5 8 3 4 3 4 7 8 7 8 7 8 1 1 1 114 112 414 478 614 678 712 838 9 78 1118 1258 15 1718 1838 2012 2318 2412 2978 234 314 3 78 412 4 78 638 758 812 912 1114 1312 1458 1714 19 21 2434 158 2 214 258 278 312 4 434 518 614 712 838 912 1012 1158 14 258 278 318 312 358 412 5 514 618 714 838 834 934 1112 1214 1534 1.60 2.00 2.30 2.50 4.00 5.30 7.00 9.40 12.30 19.30 23.10 35.50 46.50 57.00 75.90 119.30 1 Standard Finish - GoldGalv(R), unless otherwise stated. F-72 E C-729 C-789 PIPE SIZE 1" COV. OF ROLL 25 212 3 4 5 6 7 8 10 12 14 16 18 20 24 3 4 1-112 2-212 3-312 4 5 6 8 10 12 14 -- -- -- 11 2" COV. 38 C-789A 2" COV. 51 C-789B 2 1 2" COV. 64 C-789C C-789D 3" COV. 76 4" COV. 100 -- -- 1-112 2-212 3-312 4 5 6 8 10 12 14 16 20 -- -- -- 3 4-112 2-212 3-312 4 5-6 8 -- 10 14 16 20 -- -- -- -- 3 4-1 114-112 2-3 312-5 6 8 10 12 14 18 -- -- -- -- -- 2 212 3-4 5-6 5-6 8 12 14 18 -- -- -- -- -- -- -- -- -- -- 8 10 12 16 Standard Finish - GoldGalv(R), unless otherwise stated. C-789E tnb07_gm102_F_72_73 1/18/08 4:24 PM Page F-73 Pipe Straps, Conduit Clamps & Hangers Pipe Rolls CR-729A -- Roller Chair RC-729 -- Adjustable Roll Support Designed for longitudinal movement of pipe where vertical adjustment is not required. Although two bolts are supplied for installation, the chair can be alternatively welded in position. Material: Cast Iron Pipe Roll and Sockets, Carbon Steel Axle, Continuous Thread Rods and Hex Nuts. Do not exceed 450F / 232C at the contact point to the roll. Finish: Material: Carbon Steel Chair and Axle with Cast Iron Pipe Roll. Use a Figure 17 when a Cast Iron Chair is required. Do not exceed 450F / 232C at the contact point to the roll. For pipe with insulation and a pipe covering protection saddle the RC-729 will have to be oversized to suit. Please see the table for the RC-729A which shows the correct sizing for insulated pipe. Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify pipe size, catalog number and finish. For pipe with insulation and a pipe covering protection saddle the CR-729A will have to be oversized to suit. Please see the Table for the RC-729A which shows the correct sizing for insulated pipe. Ordering: Specify pipe size, catalog number and finish. H B C G D A B CR-729A CR-729A CAT. NO. RC-729 RC-729 PIPE SIZE CR-729-2A CR-729-2-1/2A CR-729-3A CR-729-3-1/2A CR-729-4A CR-729-5A CR-729-6A CR-729-8A CR-729-10A CR-729-12A CR-729-14A CR-729-16A CR-729-18A CR-729-20A CR-729-24 D A 2 2 12 3 312 4 5 6 8 10 12 14 16 18 20 24 MAX. LOAD A B C D BOLT SIZE G 300 600 600 600 700 700 1,000 1,300 1,700 2,300 3,100 3,900 4,200 4,500 6,000 4 8 4 78 6 6 12 7 7 58 9 34 11 78 14 12 16 14 18 12 20 22 34 25 58 30 1 8 2 2 14 2 58 2 78 3 12 4 5 18 6 38 7 12 8 38 9 38 10 12 11 58 14 1 2 1 58 1 34 2 18 2 38 2 12 2 34 3 3 58 4 18 4 34 5 38 6 6 12 7 78 2 2 2 2 2 12 3 3 14 4 12 5 6 6 12 10 9 14 10 14 12 14 8 x 1 12 3 8 x 1 12 3 8 x 1 12 3 8 x 1 12 3 8 x 1 12 1 2 x 2 1 2 x 2 5 8 x 2 3 4 x 2 12 3 4 x 2 12 3 4 x 2 12 7 8 x 3 3 4 x 2 12 3 4 x 2 12 7 8 x 3 12 7 5 Standard Finish - GoldGalv(R), unless otherwise stated. 1 3 WT. EACH 1.10 1.40 1.60 2.60 2.90 3.90 6.00 9.00 13.80 18.90 28.10 34.90 44.40 56.30 87.50 CAT. NO. RC-729-1-1/4 RC-729-1-1/2 RC-729-2 RC-729-2-1/2 RC-729-3 RC-729-3-1/2 RC-729-4 RC-729-5 RC-729-6 RC-729-8 RC-729-10 RC-729-12 RC-729-14 RC-729-16 RC-729-18 RC-729-20 RC-729-24 RC-729-30 PIPE SIZE MAX. LOAD A B D H WT. EACH 1 14 1 12 2 2 12 3 3 12 4 5 6 8 10 12 14 16 18 20 24 30 300 300 300 600 600 700 700 700 1,000 1,300 1,700 2,300 3,075 3,970 4,200 4,550 6,160 7,290 8 8 3 8 1 2 1 2 1 2 5 8 5 8 3 4 7 8 7 8 7 8 1 1 1 1 14 1 12 1 12 3 38 3 58 4 18 5 12 6 18 7 18 7 18 8 38 9 58 12 14 18 16 18 17 34 19 34 21 78 24 14 28 58 35 12 7 14 7 14 7 14 8 8 8 8 12 9 9 10 11 12 12 18 18 18 24 24 1 14 1 38 1 58 2 2 14 2 58 2 78 3 12 4 5 18 6 38 7 12 8 38 9 12 10 12 11 58 14 17 12 1.08 1.11 1.65 2.72 2.72 2.72 3.91 4.63 7.07 11.40 13.70 15.90 28.70 42.50 46.60 66.20 102.50 186.80 3 3 Metal Framing, Pipe Hangers and Accessories Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Standard Finish - GoldGalv(R), unless otherwise stated. A-3 F-73 tnb07_gm102_F_74_75 1/17/08 5:26 PM Page F-74 Pipe Straps, Conduit Clamps & Hangers Pipe Rolls Metal Framing, Pipe Hangers and Accessories RC-729A -- Adjustable Roll Support F-74 B Designed for longitudinal movement of pipe where vertical adjustment is required. Although primarily used for support of the pipe, this component may also be placed over the pipe to act as a guide. Material: A Cast Iron Pipe Roll and Sockets with a Carbon Steel Axle. Do not exceed 450F / 232C at the contact point to the roll. D Compliance: A-A-1192A Type 42, MSS SP-69 Type 41. Finish: Black (add suffix "-B"). Electro-Galvanized (add suffix "-HDG"). For pipe with insulation and a pipe covering protection saddle, the RC-729A will have to be oversized to suit. Please see the table below which shows the correct sizing for insulated pipe. Ordering: K RC-729A Specify pipe size, catalog number and finish. RC-729A CAT. NO. RC-729A-1 RC-729A-1-1/4 RC-729A-1-1/2 RC-729A-2 RC-729A-2-1/2 RC-729A-3 RC-729A-4 RC-729A-5 RC-729A-6 RC-729A-7 RC-729A-8 RC-729A-10 RC-729A-12 RC-729A-14 RC-729A-16 RC-729A-18 RC-729A-20 RC-729A-24 RC-729A-30 PIPE SIZE OF COVERING PROTECTION SADDLE TO BE USED WITH RC-729A PIPE SIZE MAX. LOAD ROD SIZE A B D K WT. EACH 1 114 112 2 212 3 4 5 6 7 8 10 12 14 16 18 20 24 30 600 600 600 600 600 700 700 700 1,000 1,200 1,300 1,700 2,400 3,100 3,900 4,200 4,500 6,100 7,200 8 8 3 8 3 8 1 2 1 2 5 8 5 8 3 4 3 4 7 8 7 8 7 8 1 1 1 1 14 1 12 1 12 3 3 38 3 58 4 18 5 12 6 18 7 18 8 38 9 58 10 34 12 14 18 16 18 17 34 19 78 22 18 24 18 28 78 35 12 1 1 14 1 38 1 58 2 2 14 2 78 3 12 4 4 34 5 18 6 14 7 12 8 38 9 12 10 12 11 58 14 17 12 4 8 4 12 4 34 5 14 7 7 58 8 58 9 78 11 38 12 12 14 16 18 20 22 18 24 38 26 58 32 18 39 78 0.45 0.48 0.51 0.57 1.48 1.48 1.78 2.42 3.96 5.99 6.43 8.45 10.20 20.90 26.07 36.59 39.00 66.90 134.00 3 3 1 RC-729A PIPE SIZE OF ROLL 1" COV. 11 2" COV. 25 38 C-789 C-789A 2" COV. 51 2 1 2" COV. 64 C-789C C-789D 3" COV. 76 4" COV. 100 2 12 3 4 5 6 7 8 10 12 14 16 18 20 24 30 3 4-1 1 14-1 12 2 12-3 3 12 4-5 6 -- 8 10 12 14 16 18 20 24 -- 4-1 1 12 2-2 12 3-3 12 4-5 6 8 10 12 14 16 18 20 24 -- -- 3 4-1 1 14-1 12 2-2 12 3-4 5 6 8 10 12-14 16 -- 18-20 24 -- -- -- 3 4-1 1 14-1 12 2-2 12 3-3 12 4-5 6 8 10 12-14 16 18-20 24 -- -- -- -- -- 2-2 12 3-3 12 4-5 6-8 -- 10 12-14 -- 16-20 24 -- -- -- -- -- -- -- -- 4-6 -- 8 10 12 14-18 20-24 3 C-789B Standard Finish - GoldGalv(R), unless otherwise stated. C-789E tnb07_gm102_F_74_75 1/17/08 5:27 PM Page F-75 Pipe Straps, Conduit Clamps & Hangers Pipe Rolls S-730-C -- Chair and Roll Designed for longitudinal movement of pipe where vertical adjustment is not required. Because the chair is made of steel, it can be either welded or bolted in position. Material: Carbon Steel Chair and Axle with Cast Iron Pipe Roll. Use a Figure 17 when a Cast Iron Chair is required. Do not exceed 450F / 232C at the contact point to the roll. Compliance: Federal Specification A-A-1192A Type 44, MSS-SP-69 Type 44. Black (add suffix "-B"). Electro-Galvanized (add suffix "-HDG"). For pipe with insulation and a pipe covering protection saddle, the S-730-C will have to be oversized to suit. Please see the Table below showing the correct sizing for insulated pipe. Ordering: Specify chair number, catalog number and finish. D J P K D P J 1 25 32 -- -- -- 1 -- -- 2 -- 3 -- 4 -- -- 5 5 6 6 7 -- 7 -- O C S S C K O E E N N C-789 C-789A C-789E 2 -- -- -- -- 3 3 3 2 12 4-3 4-2 1 2 4-1 3 4 -- 3 20-80 20-65 20-40 -- 3 12 -- -- -- -- 3 4 4-6 3-5 2-4 4-1 1 2 5 100-150 80-125 50-100 20-40 6 -- -- -- -- 8 8 6-8 5-8 2-5 10 200 150-200 125-200 50-125 12 10-12 10-12 10-12 6-8 14 250-300 250-300 250-300 150-200 16 14-18 14-18 14-18 10-16 18 350-450 350-450 350-450 250-400 20 -- -- -- -- 24 20 20 18-20 18-20 600 500 500 450-500 450-500 30 24 24 24 24 750 600 600 600 600 36 30 30 30 30 900 750 750 750 750 42 40 36 36 36 1050 1000 900 900 900 -- -- -- -- -- -- -- 2-6 50-150 8 200 10-14 250-350 -- 16-18 400-450 20-24 500-600 30 750 36 900 -- -- -- -- -- -- -- 4-5 100-125 6-8 150-200 10-12 250-300 -- 14-18 350-450 20-24 500-600 28 700 32 800 1" COV. 25 C-789B 11 2" COV. 38 2" COV. 51 C-789C 21 2" COV. 64 3" COV. 76 4" COV. 102 Chair No. 2 thru 6 Chair No. 1A & 1 S-730-C S-730-C CAT. NO. CHAIR NO. MAX. LOAD BARE PIPE SIZE S-730-C-1A 1 2532 390 S-730-C-1 1 950 S-730-C-2 2 2,100 S-730-C-3 3 3,075 S-730-C-4 4 4,980 S-730-C-5 S-730-C-6 S-730-C-7 5 6 7 6,100 7,500 12,000 2 2 12 3 3 12 4 5 6 8 10 12 14 16 18 20 24 30 36 42 O P S WT. EA. 64 3 12 4 18 7.0 64 4 34 4 34 10.5 16 7 5 16.5 16 9 6 26.8 16 10 6 12 40.5 16 16 1 116 11 12 14 34 17 6 34 8 9 51.0 89.8 145 C D E J K M N 6 8 12 6 12 1 1 4 2 47 6 10 18 8 1 1 4 2 38 47 7 9 4 1 3 8 3 34 11 8 11 5 3 4 1 3 8 4 34 11 9 12 12 6 3 4 1 1 2 4 34 13 8 7 8 11 12 13 3 4 17 14 20 1 12 1 34 2 18 2 38 2 34 3 38 3 7 8 5 18 6 14 7 38 8 8 7 8 10 11 13 16 14 20 231 8 7 12 10 12 1 1 1 5 8 8 1 4 78 5 58 5 78 5 13 13 Metal Framing, Pipe Hangers and Accessories Finish: C-789D BARE CHAIR PIPE NO. SIZE A-3 F-75 tnb07_gm102_F_76_77 1/17/08 5:23 PM Page F-76 Pipe Straps, Conduit Clamps & Hangers Pipe Rolls Metal Framing, Pipe Hangers and Accessories S-730-D -- Adjustable Chair and Roll Designed for longitudinal movement of pipe where vertical and lateral adjustment is required. Because the base plate is made of steel, it can be either welded or bolted in position. The correct height can be obtained by adjusting the screws at each corner. The correct lateral location can be achieved by sliding the chair on the ends of the adjusting screws. The S-730-D may be used without the Base Plate to rest on customer provided flooring or structure. Material: E All Holes in Base are 1" Diam. Carbon Steel Chair, Base, Axle and Adjusting Screws with Cast Iron Pipe Roll. Use a Figure 53 when a Cast Iron Chair and Base are required. Do not exceed 450F / 232C at the contact point to the roll. N D B Adjusting Compliance: Federal Specification A-A-1192A Type 46, MSS-SP-69 Type 46. Finish: Bolts Black (add suffix "-B"). Electro-Galvanized (add suffix "-HDG"). For pipe with insulation and a pipe covering protection saddle the S-730-D will have to be oversized to suit. Please see the Table below showing the correct sizing for insulated pipe. Ordering: Specify chair number, catalog number and finish. S-730-D S-730-D CAT. NO. CHAIR MAX. NO. LOAD S-730-D-1A 1A -- -- -- S-730-D-1 1 -- -- S-730-D-2 2 -- S-730-D-3 3 -- S-730-D-4 4 -- -- S-730-D-5 5 S-730-D-6 6 S-730-D-7 7 -- 390 -- -- -- 950 -- -- 2,100 -- 3,075 -- 4,980 -- -- 6,100 7,500 12,000 12,000 BARE PIPE SIZE 2 -- 3 312 4 5 6 8 10 12 14 16 18 20 24 30 36 42 B C 6 8 5 2 2 12 -- -- -- -- -- 8 12 5 34 -- -- -- -- 10 58 6 12 -- -- 12 12 7 34 -- -- 1458 858 -- -- -- -- 15 3 4 8 58 19 14 10 12 2212 12 2212 12 7 1 D E MIN. MAX. WT. EA. 3 8 -- -- -- 5 18 -- -- 7 38 -- 9 12 -- 1118 -- -- 12 1 4 15 34 16 16 1 4 -- 2 12 212 2 78 3 3 78 5 38 6 7 18 8 914 1012 1114 13 38 16 78 20 2318 3 2 18 -- -- 3 38 -- -- 4 78 -- 5 78 -- 578 -- -- 6 18 7 14 838 838 3 8 -- -- -- 4 12 -- -- 6 58 -- 7 58 -- 734 -- -- 8 10 12 1134 1134 15.5 -- -- -- 20.7 -- -- 34.3 -- 50.6 -- 73.6 -- -- 88.7 166 233 233 7 3 7 PIPE SIZE OF COVERING PROTECTION SADDLE TO BE USED WITH S-730-D BARE CHAIR PIPE NO. SIZE 1A -- -- -- 1 -- -- 2 -- 3 -- 4 -- -- 5 5 6 6 7 -- 7 C-789 1" COV. 25 C-789A 11 2" COV. 38 C-789B C-789C C-789D 2" COV. 2 1 2" COV. 3" COV. 51 64 76 2 -- -- -- -- -- -- 3 3 3 4-3 4-212 4-112 -- -- -- 212 3 20-80 20-65 20-40 312 -- -- -- -- -- -- 3 4 4-6 3-5 2-4 4-112 -- -- 5 100-150 80-125 50-100 20-40 -- -- 6 -- -- -- -- -- -- 8 8 6-8 5-8 2-5 2-6 4-5 10 200 150-200 125-200 50-125 50-150 100-125 12 10-12 10-12 10-12 6-8 8 6-8 14 250-300 250-300 250-300 150-200 200 150-200 16 14-18 14-18 14-18 10-16 10-14 10-12 18 350-450 350-450 350-450 250-400 250-350 250-300 20 -- -- -- -- -- -- 24 20 20 18-20 18-20 16-18 14-18 600 500 500 450-500 450-500 400-450 350-450 30 24 24 24 24 20-24 20-24 750 600 600 600 600 500-600 500-600 36 30 30 30 30 30 28 900 750 750 750 750 750 700 42 40 36 36 36 36 32 1,050 1,000 900 900 900 900 800 Standard Finish - GoldGalv(R), unless otherwise stated. F-76 C-789E 4" COV. 102 tnb07_gm102_F_76_77 1/17/08 5:24 PM Page F-77 Pipe Straps, Conduit Clamps & Hangers Pipe Attachments CR-786 -- Adjustable Pipe Support Used for support of piping from below without welding to the pipe, and consists of a steel saddle, nipple and pipe reducer. It connects to a threaded pipe standard and base. Rated loads are for up to 650F (343C). Materials: C L B Reducer is Cast Iron, Pipe saddle and nipple are carbon steel. Compliance: Federal Specification A-A-1192A Type 39, MSS-SP-69 Type 39. Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify pipe size, catalog number and finish. E D A C-786 C-786 CAT. NO. PIPE SIZE MAX. LOAD A B D MIN. E MAX. E WT. EACH C-786-1-1/2 C-786-2 C-786-2-1/2 C-786-3 C-786-4 C-786-5 C-786-6 C-786-8 C-786-10 C-786-12 C-786-14 C-786-16 C-786-18 C-786-20 C-786-24 C-786-30 C-786-36 1 12 2 2 12 3 4 5 6 8 10 12 14 16 18 20 24 30 36 5,000 5,000 5,000 5,000 7,000 7,000 7,000 7,000 7,000 7,000 7,000 7,000 7,000 7,000 10,000 10,000 10,000 2 12 2 12 2 12 2 12 3 3 3 3 3 3 4 4 6 6 6 6 6 1 14 1 12 1 78 2 18 2 58 31 4 3 78 4 78 5 78 6 78 7 12 8 58 9 58 10 58 12 34 15 34 18 34 1 12 1 12 1 12 1 12 2 12 2 12 2 12 2 12 2 12 2 12 3 3 4 4 4 4 4 8 8 8 8 14 9 18 9 58 10 14 11 14 12 38 13 38 15 12 16 58 19 18 20 18 22 14 25 14 28 14 13 13 13 13 14 14 18 14 58 15 14 16 14 17 38 18 38 20 12 21 58 24 18 25 18 27 14 30 14 33 14 4.75 4.80 4.90 5.00 9.30 9.65 11.70 12.90 14.10 15.30 21.70 25.40 39.30 44.90 54.30 62.40 70.20 Metal Framing, Pipe Hangers and Accessories Finish: Standard Finish - GoldGalv(R), unless otherwise stated. A-3 F-77 tnb07_gm102_F_78_79 1/17/08 5:24 PM Page F-78 Pipe Straps, Conduit Clamps & Hangers Metal Framing, Pipe Hangers and Accessories Pipe Saddles and Pipe Shields C-789, C-789A, C789B, C-789C, C-789D, C-789E -- Pipe Covering Protection Saddle The C-789 saddles are used to protect the insulation against damage and keep heat loss to a minimum. They are designed for from 1" up to 5" of covering. All Saddles are 12" long with three tabs on each side for welding to pipe. Sizes 12" and larger have a welded-in center rib. Material: 12" Center Rib Sizes 12" & Larger Carbon Steel (except C-789 and C-789-8 which are Chrome Molybdenum Steel). Compliance: Federal Specification A-A-1192A Type 39A or 39B, MSS-SP-69 Type 39A or 39B and BSPSS-BS3974. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify catalog number and pipe size. B B A Figure 1 A Figure 2 C-789 C-789 CAT. NO. C-789-3/4 C-789A-3/4 C-789B-3/4 C-789-1 C-789A-1 C-789B-1 C-789-1-1/4 C-789A-1-1/4 C-789B-1-1/4 C-789C-1-1/4 C-789-1-1/2 C-789A-1-1/2 C-789B-1-1/2 C-789C-1-1/2 C-789-2 C-789A-2 C-789B-2 C-789C-2 C-789D-2 C-789-2-1/2 C-789A-2-1/2 C-789B-2-1/2 C-789C-2-1/2 C-789D-2-1/2 PIPE SIZE 4 4 3 4 3 4 3 4 1 114 114 114 114 112 112 112 112 2 2 2 2 2 212 212 212 212 212 3 3 MAX. ACTUAL COVERING COVERING THICKNESS THICKNESS 1 1 1 2 2 1 112 2 1 112 2 212 1 112 2 212 1 112 2 212 3 1 112 2 212 3 16 1 1 2 2 1116 1916 218 7 8 158 11516 212 1116 1916 238 278 1116 1916 218 258 3116 1116 178 238 278 338 15 Standard Finish - GoldGalv (R), unless otherwise stated. F-78 Covering Thickness MAX. LOAD ROLL SIZE 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,200 1,800 1,800 1,200 1,200 1,800 1,800 1,800 1,200 1,200 1,800 1,800 1,800 212 3 4 214 3 4 3 312 5 6 3 4 5 6 312 4 6 7 7 4 6 6 7 7 FIGURE 1 A B ROLL SIZE 218 258 314 234 278 338 212 3 358 414 212 31 8 4916 458 278 3916 414 434 514 312 412 458 5916 558 158 218 258 134 238 234 2 212 3116 312 2 258 338 378 238 258 312 4 412 278 338 378 438 478 2-312 2-312 2-312 2-312 2-312 2-312 2-312 2-312 2-312 4-6 2-312 2-312 2-312 4-6 2-312 2-312 4-6 4-6 7-10 2-312 2-312 4-6 7-10 7-10 FIGURE 2 A B WT. EACH 2516 21116 338 2716 21516 312 2916 3316 31116 4116 21116 3516 334 4316 21516 3516 378 41316 5516 3916 334 4316 5116 5916 158 214 258 134 238 234 2 212 3116 312 2 258 338 378 238 258 312 4 412 278 338 378 438 478 1.15 2.10 2.63 1.15 2.10 2.63 1.25 2.10 2.63 3.25 1.50 2.10 3.10 3.75 1.63 2.10 3.12 3.63 4.40 1.75 2.40 3.12 3.63 4.40 tnb07_gm102_F_78_79 1/17/08 5:25 PM Page F-79 Pipe Straps, Conduit Clamps & Hangers Pipe Saddles and Pipe Shields C-789 (continued) CAT. NO. MAX. COVERING THICKNESS ACTUAL COVERING THICKNESS MAX. LOAD ROLL SIZE FIGURE 1 A B ROLL SIZE FIGURE 2 A B WT. EACH 3 3 3 3 3 4 4 4 4 4 4 4 4 5 5 5 5 5 5 5 5 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 10 10 10 10 10 10 10 10 12 12 12 12 12 12 12 12 1 1 12 2 2 12 3 1 1 12 2 2 12 3 4 4 5 12 1 1 12 2 2 12 3 4 4 5 12 1 1 12 2 2 12 3 4 4 5 12 1 1 12 2 2 12 3 4 4 5 12 1 1 12 2 2 12 3 4 4 5 12 1 1 12 2 2 12 3 4 4 5 12 1 116 1 916 2 116 2 916 3 116 1 116 1 916 2 116 2 916 3 18 4 18 4 116 5 1116 1 116 1 916 2 116 2 916 3 116 4 14 4 316 5 1116 1 1 12 2 116 2 916 3 116 4 316 4 18 5 58 1 116 1 916 2 116 2 1116 3 316 4 316 4 316 5 916 1 1 58 2 116 2 18 3 18 4 18 4 116 5 916 1 18 1 58 2 18 2 18 3 18 4 18 4 18 5 916 1,200 1,800 1,800 1,800 1,800 5,000 5,000 5,000 5,000 5,000 5,000 5,000 5,000 1,800 1,800 1,800 1,800 1,800 1,800 5,000 5,000 1,800 1,800 1,800 1,800 1,800 1,800 7,200 7,200 1,800 1,800 1,800 1,800 1,800 1,800 7,200 7,200 1,800 1,800 1,800 1,800 5,000 5,000 7,200 7,200 2,500 5,000 5,000 5,000 5,000 5,000 11,000 11,000 4 6 7 8 8 6 7 7 10 10 12 12 16 6 7 8 10 10 12 12 18 7 8 10 12 12 12 12 18 10 10 12 14 12 16 16 20 10 10 12 16 16 18 18 20 14 14 16 18 18 20 20 24 3 12 4 12 4 34 5 38 5 78 4 14 4 34 5 38 6 6 58 7 34 7 34 9 58 4 78 5 12 6 6 58 7 18 8 14 8 38 10 316 5 38 5 78 6 38 7 7 34 8 78 8 78 11 916 7 7 7 12 8 14 8 78 10 10 11 1316 8 14 8 14 9 18 9 58 10 18 11 18 11 18 13 18 9 38 9 38 10 10 12 11 14 12 14 12 14 14 14 2 78 3 34 4 4 58 5 3 12 4 4 58 5 18 5 34 6 12 6 12 8 14 4 18 4 34 5 14 5 34 6 14 7 7 18 8 34 4 58 5 5 12 6 6 12 7 58 7 78 10 6 6 6 12 7 7 58 8 34 8 34 10 14 7 14 7 14 7 78 8 18 8 78 9 34 9 34 11 14 8 18 8 18 8 58 9 18 9 34 10 34 10 34 12 38 2-3 12 4-6 4-6 7-10 7-10 4-6 4-6 4-6 7-10 7-10 7-10 7-10 16 4-6 4-6 7-10 7-10 7-10 7-10 7-10 18 4-6 7-10 7-10 12-15 7-10 12-15 12-15 18 7-10 7-10 7-10 12-15 12-15 12-15 12-15 20 7-10 7-10 7-10 16-20 16-20 16-20 16-20 20 12-15 12-15 16-20 16-20 16-20 16-20 16-20 24 3 916 4 116 4 916 5 38 6 4 4 116 5 18 5 78 6 38 7 916 7 58 9 12 4 5 316 6 6 716 7 532 8 332 8 14 10 34 5 18 6 316 6 12 7 58 7 12 8 1316 8 78 11 12 6 916 7 316 7 1116 8 1116 8 2732 9 1316 9 78 11 34 6 916 7 316 7 1116 9 1116 10 38 11 116 11 18 12 58 9 14 9 78 9n 10 916 11 18 12 116 12 18 13 34 2 78 3 34 4 4 58 5 3 12 4 4 58 5 18 5 34 6 12 6 12 8 14 4 18 4 34 5 14 5 34 6 14 7 7 18 8 34 4 58 5 5 12 6 6 12 7 58 7 78 10 6 6 6 12 7 7 58 8 34 8 34 10 14 7 14 7 14 7 78 8 18 8 78 9 34 9 34 11 14 8 18 8 18 8 58 9 18 9 34 10 34 10 34 12 38 1.75 2.75 3.50 3.93 4.40 2.13 3.00 3.50 3.93 5.00 6.30 14.45 26.40 2.38 3.00 3.62 4.06 5.00 6.30 14.95 27.40 3.85 4.75 6.28 7.09 8.10 10.15 16.00 27.50 5.05 5.25 7.00 7.55 9.90 10.13 16.90 34.10 5.05 5.25 7.0 8.75 10.70 13.88 17.50 36.60 7.30 7.35 9.20 10.04 11.00 14.45 28.00 36.60 Metal Framing, Pipe Hangers and Accessories C-789-3 C-789A-3 C-789B-3 C-789C-3 C-789D-3 C-789-4 C-789A-4 C-789B-4 C-789C-4 C-789D-4 C-789E-4 C-789-4 C-789-4 C-789-5 C-789A-5 C-789B-5 C-789C-5 C-789D-5 C-789E-5 C-789-5 C-789-5 C-789-6 C-789A-6 C-789B-6 C-789C-6 C-789D-6 C-789E-6 C-789-6 C-789-6 C-789-8 C-789A-8 C-789B-8 C-789C-8 C-789D-8 C-789E-8 C-789-8 C-789-8 C-789-10 C-789A-10 C-789B-10 C-789C-10 C-789D-10 C-789E-10 C-789-10 C-789-10 C-789-12 C-789A-12 C-789B-12 C-789C-12 C-789D-12 C-789E-12 C-789-12 C-789-12 PIPE SIZE A-3 F-79 tnb07_gm102_F_80_81 1/18/08 4:22 PM Page F-80 Pipe Straps, Conduit Clamps & Hangers Metal Framing, Pipe Hangers and Accessories Pipe Saddles & Pipe Shields Covering Thickness 12" Center Rib Sizes 12" & Larger B A Figure 1 A Figure 2 C-789 C-789 (continued) CAT. NO. C-789A-14 C-789B-14 C-789C-14 C-789D-14 C-789E-14 C-789-14 C-789-14 C-789A-16 C-789B-16 C-789C-16 C-789D-16 C-789E-16 C-789-16 C-789-16 C-789A-18 C-789B-18 C-789C-18 C-789D-18 C-789E-18 C-789-18 C-789-18 C-789A-20 C-789B-20 C-789C-20 C-789D-20 C-789E-20 C-789-20 C-789-20 C-789A-24 C-789B-24 C-789C-24 C-789D-24 C-789E-24 C-789-24 PIPE SIZE MAX. COVERING THICKNESS ACTUAL COVERING THICKNESS MAX. LOAD ROLL SIZE 14 14 14 14 14 14 14 16 16 16 16 16 16 16 18 18 18 18 18 18 18 20 20 20 20 20 20 20 24 24 24 24 24 24 1 12 2 2 12 3 4 4 5 12 1 12 2 2 12 3 4 4 5 12 1 12 2 2 12 3 4 4 5 12 1 12 2 2 12 3 4 4 5 12 1 12 2 2 12 3 4 4 1 12 2 2 18 3 4 4 5 12 1 12 2 2 12 3 4 4 5 12 1 12 2 2 12 3 4 4 5 12 1 12 2 2 12 3 4 4 5 12 1 12 2 2 12 3 4 4 5,000 5,000 5,000 5,000 5,000 11,000 11,000 5,000 5,000 7,200 7,200 7,200 11,000 11,000 5,000 7,200 7,200 7,200 7,200 13,200 13,200 7,200 7,200 7,200 7,200 7,200 13,200 13,200 7,200 7,200 7,200 7,200 7,200 13,200 16 18 18 18 24 24 24 18 20 20 24 24 24 30 20 24 24 24 24 24 30 24 24 24 24 30 7 30 30 30 30 30 30 30 Standard Finish - GoldGalv(R), unless otherwise stated. F-80 B FIGURE 1 A B ROLL SIZE 10 14 10 34 11 38 12 13 14 12 34 15 11 18 11 34 12 14 12 78 14 14 16 15 12 14 13 18 13 12 14 15 38 15 18 17 13 13 12 14 14 58 15 14 16 12 16 58 18 13 16 38 16 38 17 17 12 18 34 18 78 9 9 38 9 78 10 12 11 34 11 14 13 18 9 34 10 14 10 34 11 18 12 14 12 14 13 78 10 34 11 58 11 34 12 14 13 58 13 38 15 11 34 12 14 12 78 13 34 14 14 14 38 16 14 18 14 18 14 34 15 14 16 12 16 58 16-20 16-20 16-20 16-20 22-24 22-24 24 16-20 16-20 16-20 22-24 22-24 22-24 30 16-20 22-24 22-24 22-24 22-24 22-24 30 22-24 22-24 22-24 26-30 26-30 26-30 30 26-30 26-30 26-30 26-30 26-30 26-30 FIGURE 2 A B WT. EACH 10 38 10 34 11 14 11 34 12 38 11 78 14 12 11 14 11 58 12 14 12 78 13 916 13 58 15 34 12 14 12 38 13 13 12 14 58 14 38 16 78 13 13 12 14 18 14 78 15 34 15 78 17 78 15 34 15 34 16 58 17 18 18 18 18 9 9 38 9 78 10 12 11 34 11 14 13 18 9 34 10 14 10 34 11 18 12 14 12 14 13 78 10 34 11 58 11 34 12 14 13 58 13 38 15 11 34 12 14 12 78 13 34 14 14 14 38 16 14 18 14 18 14 34 15 14 16 12 16 58 8.25 9.20 10.04 11.00 15.50 27.60 36.60 8.25 9.20 13.69 14.65 15.50 30.10 39.00 9.35 12.00 14.19 15.25 21.00 40.30 52.10 11.05 12.40 14.19 15.25 22.80 44.80 52.10 12.90 13.90 18.07 19.35 23.10 45.40 tnb07_gm102_F_80_81 1/18/08 4:22 PM Page F-81 Pipe Straps, Conduit Clamps & Hangers Pipe Saddles and Pipe Shields C-790 -- Insulation Shield Designed to protect the insulation and distribute the load at the hanger point. This item is usually used with our C-710 Clevis Hanger. Approvals: Federal Specification A-A-1192A Type 40, MSS-SP-69 Type 40. Material: Carbon Steel. Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG"). Ordering: Specify hanger size, and catalog number. C-790 PIPE SIZES 2 4 1 1 3 C-790 1 12 2 Insulation Thickness (Inches) 2 4 1 1 14 1 12 2 2 12 3 3 12 4 5 6 8 10 12 14 1 3 1A* 1A 1A 2A 2A 3A 4A 5A -- -- -- -- -- -- -- -- 1A 1A 2A 3A 3A 4A 5A 6A -- -- -- -- -- -- -- -- -- 2A 3A 4A 4A 5A 6A 7A 8A 8A 9B 10B -- 14C 16C 17C -- 4A 5A 6A 6A 7A 7A 8A 9A 9A 10B 11B 13C 15C 17C 19C -- 6A 7A 7A 7A 8A 8A 9A 10A 10A 11B 12B 14C 16C 19C -- CAT. NO. C-790-1A C-790-2A C-790-3A C-790-4A C-790-5A C-790-6A C-790-7A C-790-8A C-790-9A C-790-10A C-790-11B C-790-12B C-790-13C C-790-14C C-790-15C C-790-16C C-790-17C C-790-18C INSIDE DIAMETER CLEVIS HANGER SIZE LENGTH WT.EACH 2 38 2 78 3 12 4 4 12 5 5 58 6 58 7 58 8 58 9 58 10 34 11 34 12 34 14 15 16 17 2 2 12 3 3 12 4 5 5 6 7 8 10 10 12 12 14 16 16 18 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 12 0.62 0.76 0.92 1.04 1.16 1.32 1.46 1.58 1.74 2.02 2.28 2.54 2.84 4.18 4.58 4.90 5.20 5.53 Standard Finish - GoldGalv(R), unless otherwise stated. RC-729 -- Adjustable Roll Support M-117 -- Eye Socket A Designed for attaching a rod to split ring type clamps. M-117 is only available in 1 4", 3 8", and 1 2" rod sizes. Material: Rod Size Metal Framing, Pipe Hangers and Accessories Shield Size Selection Table Malleable Iron. Compliance: Federal Specification WW-H-171E Type 16, MSS-SP-69 (Type 16). Finish: Plain, Copper. Ordering: Specify rod size and catalog number. CAT. NO. M-117-1/4 M-117-3/8 M-117-1/2 M-117-5/8 M-117-3/4 M-117-7/8 ROD SIZE A MAX. LOAD 4 8 1 2 5 8 3 4 7 8 240 610 1,000 1,400 2,200 2,300 1 3 E MAX. B E WT. EACH 4 4 1 4 3 8 1 2 1 2 1 38 1 38 1 916 1 34 2 14 2 7 16 0.08 0.08 0.11 0.22 0.30 0.32 1 1 "B" Max. Dia. M-117 Standard Finish - GoldGalv(R), unless otherwise stated. A-3 F-81 tnb07_gm102_F_82_83 1/17/08 5:22 PM Page F-82 Pipe Straps, Conduit Clamps & Hangers Rods and Rod Attachments Metal Framing, Pipe Hangers and Accessories How to Order Shield Size Selection Table CAT. NO. PIPE SIZES D Sizes of CL-710 OR C-710 Clevis F 1 1D 2 1A 1A 2A 3A 3A 4A 5A 6A -- -- -- -- -- -- -- -- -- 2A 3A 4A 4A 5A 6A 7A 8A 8A 9B 10B -- 14C 16C 17C -- 4A 5A 6A 6A 7A 7A 8A 9A 9A 10B 11B 13C 15C 17C 18C -- 6A 7A 7A 7A 8A 8A 9A 10A 10A 11B 12B 14C 16C 18C -- Insulation Thickness (Inches) C-790-1/2 C-790-3/4 C-790-1 C-790-1-1/4 C-790-1-1/2 C-790-2 C-790-2-1/2 C-790-3 C-790-3-1/2 C-790-4 C-790-5 C-790-6 C-790-8 C-790-10 C-790-12 C-790-14 2 3 4 1 11 4 112 2 2 12 3 3 12 4 5 6 8 10 12 14 1A* 1A 1A 2A 2A 3A 4A 5A -- -- -- -- -- -- -- -- 1 PIPE SIZES 2 4 1 3 1 1 1 2 2 For Use with Shields Outside of Insulation. Insulation Thickness (Inches) 2 4 1 1 14 1 12 2 2 12 3 3 12 4 5 6 8 10 2 2 2 2 12 2 12 3 3 12 4 -- -- -- -- -- -- 1 3 2 2 2 12 3 3 3 12 4 5 -- -- -- -- -- -- -- 2 12 3 3 3 12 4 5 5 6 6 8 8 -- 12 -- 3 12 4 5 5 5 5 6 8 8 8 10 12 -- -- 5 5 5 5 6 6 8 8 8 10 10 12 -- *For Unarco foam specify X1A E-151 -- Lag Rod L Designed for a vertical rod connection to wood. B A Material: Carbon Steel Finish: C Standard Finish - GoldGalv , Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG") (R) E-151 Ordering: Specify rod diameter, rod length, catalog number and finish E-151 CAT. NO. E-151-3/8 E-151-1/2 E-151-5/8 ROD SIZE MAX. LOAD 8 2 5 8 390 640 750 3 1 Standard Finish - GoldGalv(R), unless otherwise stated F-82 MIN. LENGTH MACHINE COACH B C 2 12 2 12 2 12 2 2 2 12 4 114 6 152 WT. EACH LENGTH -- DIMENSION "L" 8 203 0.12 0.22 0.35 0.19 0.34 0.53 0.25 0.44 0.70 10 254 12 356 0.31 0.56 0.87 0.37 0.67 0.59 tnb07_gm102_F_82_83 1/17/08 5:23 PM Page F-83 Pipe Straps, Conduit Clamps & Hangers Rods and Rod Attachments E-156 -- Machine Thread Eye Rod Designed to permit swing in the attachment component due to pipe movement. The inside diameter of the eye is c" larger than the rod diameter for rod sizes up to 11 2" while the inside diameter for larger size rods will be 3 4" greater. The eye is not welded. The E-157 Welded Eye Rod is available for higher load requirements. Specify D A Carbon Steel Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG") C E-156 Temperature: 650F / 343C Maximum Ordering: Specify rod size, rod length, thread length, (if other than standard), catalog number and finish. E-156 A C D Load 8 4 2 12 240 3 3 2 8 2 12 440 8 1 2 12 705 1 5 7 3 4 11 8 3 1,050 7 8 1 14 3 12 1,470 1 1 38 4 1,940 1 14 1 58 5 3,170 1 12 1 78 6 4,650 1 34 2 12 6 6,380 2 2 34 6 8,280 2 14 2 12 3 3 14 6 6 10,900 13,400 E-157 -- Machine Thread Eye Rod B Welded Eyerods are designed to permit swing in the attachment component due to pipe movement. Material: A D Carbon Steel. Larger rod diameters over 212", special materials, and special eye dimensions can be furnished upon request Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG") Ordering: Specify catalog number, finish, rod size, rod length and thread length if other than standard Specify E-157 Metal Framing, Pipe Hangers and Accessories Material: E-157 A B Thread Length D Load at 650F/343C Load at 750F/399C 8 4 3 2 8 3 3 1 3 7 8 1 3 4 1 18 3 8 1 14 4 1 1 38 4 1 14 1 58 4 1 12 1 78 6 1 34 2 12 6 2 2 34 6 5 3 7 2 14 3 6 2 12 3 14 6 610 1,130 1,810 2,710 3,770 4,960 8,000 11,630 15,700 20,700 27,200 33,500 540 1,010 1,610 2,420 3,360 4,420 7,140 10,370 14,000 18,460 24,260 29,880 Standard Finish - GoldGalv(R), unless otherwise stated A-3 F-83 tnb07_gm102_F_84_85 1/17/08 5:09 PM Page F-84 Pipe Straps, Conduit Clamps & Hangers Rod and Rod Attachments Metal Framing, Pipe Hangers and Accessories Tap F-111 -- Forged Steel Clevis Used to connect rod ends with structural steel welding lug plates or lugs welded to pipe. It provides a pivot point and adjustment. It can be supplied with a pin as F-111. Material: Forged Steel Compliance: Federal Specification A-A-1192A Type 14, MSS-SP 69 Type 14 and BSPSS-BS3974 E Take Out Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG") Ordering: Specify catalog number, rod size, pin size, grip "G" and finish P F-111 Grip F-111 NOTE: Pins and Cotter Pins supplied when requested as Fig. F-111. CAT. NO. F-111-3/8 F-111-1/2 F-111-5/8 F-111-3/4 F-111-7/8 F-111-1 F-111-1-1/4 F-111-1-1/2 F-111-1-3/4 F-111-2 F-111-2-1/4 F-111-2-1/2 ROD SIZE MAX. LOAD PIN/BOLT 650F/343C DIA. 8 2 5 8 3 4 7 8 1 1 14 1 12 1 34 2 214 2 12 610 1,130 1,810 2,710 3,770 4,960 8,000 11,630 15,700 20,700 27,200 33,500 3 1 2 8 3 4 7 8 1 1 18 1 38 1 58 178 2 14 2 12 2 34 1 5 SIZE NO. P WT. EACH 2 2 2 2 12 2 12 3 3 3 12 4 5 6 6 16 16 16 1 1 18 1 14 1 12 1 34 2 2 38 2 58 2 78 0.77 0.77 0.77 2.50 2.50 4.00 4.00 6.00 8.00 16.00 26.00 36.00 9 11 13 Standard Finish - GoldGalv(R), unless otherwise stated E-120-A -- Forged Weldless Eyenut Used to connect rod ends with structural steel welded beam attachments or pipe clamps as a substitute for a welded eyerod. It provides a pivot point and adjustment. It can also be supplied tapped left hand as E-120-A. Material: A Forged Steel Compliance: Federal Specification A-A-1192A Type 17, MSS-SP 69 Type 17, and BSPSS-BS3974 F Finish: Standard Finish - GoldGalv(R), Black (add suffix "-B"), Electro-Galvanized (add suffix "-EG") Ordering: Specify catalog number, rod size and finish E-120-A C L E-120-A CAT. NO. E-120-A-3/8 E-120-A-1/2 E-120-A-5/8 E-120-A-3/4 E-120-A-7/8 E-120-A-1 E-120-A-1-1/4 E-120-A-1-1/2 E-120-A-1-3/4 E-120-A-2 E-120-A-2-1/4 E-120-A-2-1/2 ROD TAP A MAX. LOAD 650F/343C F WT. EACH 8 2 5 8 3 4 7 8 1 1 14 1 12 1 34 2 2 14 2 12 610 1,130 1,810 2,710 3,770 4,960 8,000 11,630 15,700 20,700 27,200 33,500 1 1 1 1 1 38 1 34 1 34 1 34 3 14 3 14 3 14 3 14 0.20 0.31 0.55 1.00 1.55 2.45 3.75 6.75 16.40 16.75 16.75 16.75 3 1 Standard Finish - GoldGalv(R), unless otherwise stated F-84 tnb07_gm102_F_84_85 1/17/08 5:09 PM Page F-85 Surface Raceway & Lighting Systems Series 800 Surface Raceway and Lighting Systems Electrical Raceway Superstrut(R) channel together with snap in closure strip is listed by Underwriters Laboratories as a surface metal raceway. Other accessories listed by Underwriters Laboratories are identified on the drawings. Metal Framing, Pipe Hangers and Accessories Electrical Applications Column A Suitable for number of wires indicated when used as a raceway. Also suitable for number of wires indicated when installed to support and supply electric discharge type fixtures when raceway wiring is suitable for not less than 75C. By providing clearance between fixture and raceway of not less than 1 2", were suitable for 60C may be used. Column B Suitable for number of wires indicated when used as a raceway. Also suitable for number of wires indicated when installed to support electric discharge type fixtures when clearance of not less than 1 8" is provided between raceway and fixture and when wiring is suitable for 75C. GoldGalv(R) hardware finish is standard for all Superstrut products. This is a multi-process finish of electro-plated zinc, followed by gold colored zinc dichromate to give excellent corrosion resistance and a superior paint base. See page F-4 for a complete description of the GoldGalv(R) hardware finish. GoldGalv(R) hardware finish will be furnished if no other finish is specified. UL(R) Listed Channels Materials Superstrut(R) electrical raceway, fixture hanging channel, closure strip and accessories are cold formed from hot rolled strip steel. * A-1200 Design Data Deflections at various hanger rod spacings for raceway channels based on 40 to 45 lbs. per fixture. * B-1200 * A-1200-KO * B1200AL * A-1200 AL * B-1400 * A-1200 PG * C-1200 * A-1400 * E-1200 * A-1400-KO * H-1200 * A-1400 SS Maximum Number of Wires Raceway CHANNEL A-1200 C-1200 A-1400 CHANNEL B-1200 B-1400 AT 10 FT. 4" 8" 3 8" DEFLECTION AT 12 FT. 2" 4" 3 4" 1 1 3 3 AT 6 FT. 8" 1" 3 *Not recommended for this spacing DEFLECTION AT 7 FT. 16" 2" 9 1 Wire With or Without KO Size Avg A-1200 A-1400 AT 14 FT. 4" * * 3 AT 9 FT. 8" * 5 14 12 10 8 6 B-1200 B-1400 C-1200 E-1200 H-1200 A B A B A B A B 6 6 5 4 2 10 10 8 6 3 4 3 -- -- -- 6 6 -- -- -- 5 4 4 3 2 10 10 6 4 2 6 6 5 4 2 10 10 8 6 3 A-3 F-85 tnb07_gm102_F_86_87 1/17/08 5:14 PM Page F-86 Surface Raceway & Lighting Systems Electrical Applications (continued) Metal Framing, Pipe Hangers and Accessories Surface Raceway Systems AB-888 Page F-89 822 Page F-88 H104 Page F-13 805 Page F-88 AB-844 Page F-89 A-853 Page F-88 A-854 Page F-88 A-854 Page F-88 E-145 Page F-11 802 Page F-88 A-1200-HS Page F-7 AB-803 Page F-89 A-853 Page F-88 AB-885 Page F-89 811 Page F-88 AB-866 Page F-89 Standard Finish - GoldGalv(R) brand F-86 804 Page F-88 tnb07_gm102_F_86_87 1/17/08 5:14 PM Page F-87 Surface Raceway & Lighting Systems Electrical Applications (continued) A-891 Page F-88 AB-888 Page F-89 A-892 Page F-88 A-853 Page F-88 Metal Framing, Pipe Hangers and Accessories A-854 Page F-88 AB-844 Page F-89 Standard Finish - GoldGalv brand (R) A-854 Page F-88 AB-288 Page F-17 E-145 Page F-11 802 Page F-88 ES-145 Page F-11 A-1200-P Page F-7 Order nuts separately 452TB Concrete Spot Insert Page F-23 540 Side Beam Hanger Clip Page F-26 S-541 Swing Connector Page F-26 500 Beam Clamp Page F-26 U-579 Ceiling Flange Page F-26 US-563 Beam Clamp Page F-28 U-569 Beam Clamp with Safety Rod Page F-29 A-3 F-87 tnb07_gm102_F_88_89 1/18/08 4:26 PM Page F-88 Surface Raceway & Lighting Systems 1 38" 32" 3 * Fixture Fittings 4"-16 UNF Thread Metal Framing, Pipe Hangers and Accessories 1 2132" A-243-1 End Cap for A-1200 Channel 802 Raceway Joiner with Reinforcing Plate furnished complete with nuts. CAT. NO. A802 B-802 E-802 H-802 FOR CHANNEL STD. CTN. A Series B Series E Series H Series 25 25 10 10 A804 B804 C-804 E-804 H-804 FOR CHANNEL A-1200 A-1400 B-1400 C-1200 E-1200 H-1200 CAT. NO. FOR CHANNEL STD. CTN. A Series H Series 25 25 A-809 H-809 A853L Channel Hanger Long type for all series channel. For attaching fixture to Slot Down Channel or to Slot up Knockouts. Specific length. Hex Nut included. STD. CTN. 25 25 25 25 25 25 CAT. NO. FOR CHANNEL STD. CTN. 1 4 x 1 4 x 1 14 50 50 811 1-STR 811-2STR 1 FOR CHANNEL STD. CTN. A Series H Series 25 25 CAT. NO. A A822* 1 1116 B-822* 78 C-822* 1 716 A854 Channel Hanger Illustration showing A-854 with nut and bolt furnished to attach to fluorescent fixture. Use with "A", "B" or "C" series channel. A854L Channel Hanger Long Illustration showing A-854-L with nut and bolt furnished to attach to fluorescent fixture. Long type for all series channel. A 822 Raceway Jointer & Seal KO for 1 2" conduit. Furnished complete with 1 4" x 5 8" flat Head Machine Screw and AB-100-14" nut. F-88 A853 Channel Hanger Use hanger rod 38" or 12". Use with "A", "B", or "C" series single channel. 811 Stud Nut 805 End Cap with Knockout A805 H-805 8" 7 12 ga for 3 4" or 1" Conduit. Furnished complete with 1 4" x 5 8" Flat Head Machine Screw and AB-100-14" nut. 7 14" CAT. NO. 4 12" A-213 809 Tapped End Cap 804 End Cap CAT. NO. Listed 3 STD. FOR CHANNEL CTN. A Series B Series C Series A890* A889* 25 25 25 A891* A892* A893 tnb07_gm102_F_88_89 1/18/08 4:26 PM Page F-89 Surface Raceway & Lighting Systems * Fixture Fittings (continued) 1 58" 4 34" 4" AB-844* Steel Closure Strip AB-844-PC* Plastic Closure Strip When used as a raceway channel, it is normally installed with the slot up and after wiring is complete, the closure strip is installed. For all channels. Standard lengths 10 ft. 1 18" 112" AB-866 2" Pipe thread 138" 1 32" 1 AB867* Spacer Clevis For use with AB-866 wiring stud nuts. AB885 15 Swivel Nuts and bolts to clamp to channel included. For 12" or 34" conduit. AB868 Fiber Retainer for cables until closure strip is installed. Metal Framing, Pipe Hangers and Accessories AB815 Swing Connector Nuts & bolts to clamp to channel included. For 12" or 34" conduit. AB803* Cast Conduit Connector 1 To connect 2" or 34" conduit to raceway channel -- Furnished complete with stud nuts & hex nuts. Part has removable bushing to increase size from 12" to 34". Listed 32 25 2 4" 1 AB-880 AB-881 3" and 4" Porcelain Saddles AB887* Single Outlet Complete unit including housing, standard SINGLE 3-wire, 15 Amp., 125 volt, NEMA ground receptacle and cover plate. AB888* Duplex Outlet Complete unit including housing, standard DUPLEX 3-wire, 15 Amp., 125 volt, NEMA ground receptacle and cover plate. CAT. NO. AB-880 AB-881 MAX. CABLE DIAM. STD. CTN. 3 4 3 412 A-3 F-89 tnb07_gm102_F_90_91 1/17/08 5:15 PM Page F-90 Special Metals Properties for Design Metal Framing, Pipe Hangers and Accessories Stainless Steel (Suffix SS/Type 304 and 6SS/Type 316) Superstrut stainless steel products are made from high-quality austenitic Type 304 and Type 316 material. Stainless steel contains large amounts of chromium and nickel, is non magnetic and offers superior corrosion resistance. Tolerant to high-temperature environments, Superstrut's stainless steel framing provides dependable support, resulting in reduced maintenance cost. The channel is roll-formed to shape when cold, enhancing its structural strength for the most rigid of applications. Stainless Steel Channel Elements of sections are the same as shown on pages F-104-F-113 for standard steel channel. Load ratings meet or exceed ratings for standard steel channel shown elsewhere in this catalog. Additional stainless steel and aluminum items are available. Contact your local Superstrut representative. Properties for Design Aluminum Channel (Suffix AL) 1 58" Y 1 58" 3 14" 1 58" Y X X X X Y 1 8" 5 M .719 X X Y 1 58" .315 Y Y Span (IN.): 12, 18, 24, 30, 36, 42, 48, 54, 60, 72, 84, 96, 108, & 120. 12 ga. = .105" I -- Moment of inertia S -- Section of Modulus r -- Radius of Gyration A -- Area Calculations based on maximum fibre stress of 10,000 PSI, maximum deflection 1/360th of span. For concentrated loads, multiply load by 0.50. Typical Physical and Mechanical Properties and Characteristics Alloy and Temper: 6063-T6 Tensile Strength: Yield -- 25,000 PSI Ultimate -- 30,000 PSI F-90 Shear -- Ultimate: 19,000 PSI Elongation: (Percent in 2 inches) -12 Density: 0.098 Lbs./Cu. Inch Modules of Elasticity: 10 X 106 PSI Section Member A IN.2 I IN.4 X - X AXIS S IN.3 r IN. I IN.4 Y - Y AXIS S IN.3 r IN. A-1200 B-1200 A-1202 .563 .400 1.126 .198 .041 1.001 .224 .082 .620 .594 .320 .942 .274 .150 .548 .338 .185 .676 .698 .612 .698 Safe Uniform Total Load Table (X-X AXIS) SPAN (IN.) 12 18 24 30 36 42 48 54 60 72 84 96 108 120 B-1200-AL (LBS.) A-1200-AL (LBS.) A-1202-AL (LBS.) 540 270 150 90 60 50 -- -- -- -- -- -- -- -- 1490 990 730 470 320 240 180 140 110 80 60 40 30 20 4130 2760 2070 1650 1370 1180 930 730 590 410 300 230 180 140 tnb07_gm102_F_90_91 1/17/08 5:15 PM Page F-91 Special Metals Aluminum Products (AL Suffix) 1 58" 158" 8" 7 12 ga. 3 4" 1 1 58" 8" 7 A-1200 1 58" deep channel and combination A-1202 A-1200-HS Slots 2" on center. Slot size 916" x 1 18" 1 58" 1 58" 8" 7 16" 13 1 58" 12 ga. B Series B-1200 A-100 Regular Spring Nut B-1202 702 Rigid Conduit Pipe Strap Metal Framing, Pipe Hangers and Accessories A Series AB-100 Springless Nut A-3 F-91 tnb07_gm102_F_92_93 1/17/08 5:11 PM Page F-92 Special Metals Metal Framing, Pipe Hangers and Accessories Type #304 Stainless Steel Products (SS Suffix) F-92 1 58" 7 8" 1 58" A Series A-1200 8" 7 A-1202 A-1200-HS 1 58" 7 8" 16" 13 B Series A-1202-HS B-1400 8" 7 B-1400-HS A-100 Regular Spring Nut B-100 Short Spring Nut AB-100 Springless Nut E-142 Hex Head Cap Screw E-145 Standard Hex Nut EF-147 Fender Washer tnb07_gm102_F_92_93 1/17/08 5:11 PM Page F-93 Special Metals Type #304 Stainless Steel Products (SS Suffix) E-147 Flat Steel Washer AB201 H-119 Rod Coupling C-775L -- Clamp with Lock Nut CAT. NO. ROD SIZE STD. CTN. CAT. NO. 4 8 1 2 100 100 100 C-775L AB-241-1/4 AB-241-3/8 AB-241-1/2 1 3 ROD SIZE A B 8 2 3 8 23 8 3 4 2 5 16 3 1 C D DESIGN LOAD, LBS. STD. CTN. 23 8 2 5 16 23 8 23 8 400 500 100 100 H-104 & R Series Rod * Hanger rod * Continuous threaded U501, U502 CAT. NO. U501 U502 FOR CHANNEL A-1200 A-1400 B-1200 B-1400 C-1200 B-1402 A-1202 A-1402 C-1202 H-1200 A STD. CTN. 33 16 20 413 16 20 CAT. NO. NATIONAL COARSE THREAD THREADS DESIGN SIZE PER INCH LOAD STD. CTN. H-104-1-1/4 H-104-3/8 H-104-1/2 H-104-5/8 H-104-3/4 H-104-7/8 H-104-1 11 4 3 8 1 2 5 8 3 4 7 8 1 500 500 500 500 500 500 500 Standard lengths 12' only 20 16 13 11 10 9 8 150 610 1,130 1,810 2,710 3,770 4,960 Metal Framing, Pipe Hangers and Accessories AB-241 AB205 Furnished complete Design Load U501 -- 2150 lbs. U502 -- 3000 lbs. 701 Series 702 Pipe and Rigid or IMC Conduit Clamp A-3 F-93 tnb07_gm102_F_94_95 1/17/08 5:17 PM Page F-94 Special Metals Metal Framing, Pipe Hangers and Accessories Type #304 Stainless Steel Products (SS Suffix) 1 58" 2" 6H Series 6H-B Series Conduit and Pipe Hanger X201 AB202 3 58" 3 58" 2 14" AB203 AB206 AB204 5 38" 7 14" AB207 X207 AB213 9 532" 3 34" 3 78" 1 58" AB214 F-94 AB219 1 2132" AW219 tnb07_gm102_F_94_95 1/17/08 5:17 PM Page F-95 Special Metals Type #304 Stainless Steel Products (SS Suffix) 5 58" 3" 45 3 12" 45 3 12" 2 516" 1 116" 2 12" SPAB-227 AB225 3 14" 1 1116" 1 58" 4 Holes 34" Dia. 4" Dia. 3 3 2" 1 3 12" 1 16" 11 3 12" 6" 6" 6" 4" Dia. 3 4 14" AP-232 4 14" 6" AP-235 AP-232SQ 4 34" 4 Holes 34" Dia. 3 12" 3 516" 3" 4 58" 6" 6" 4 14" AP-235SQ C-710 Series Standard Clevis 4 14" S-250 A is in lengths: 6,12,18 & 24. May be installed inverted with no change in load ratings. Strut section made from half slot channel. C-710 Series Standard Clevis Metal Framing, Pipe Hangers and Accessories AB220 A-716 Cushioned Clamp Tube Series C-725 C-727 Standard Ring Hanger A-3 F-95 tnb07_gm102_F_96_97 1/17/08 5:12 PM Page F-96 Special Metals Metal Framing, Pipe Hangers and Accessories Type #316 Stainless Steel Products (T316SS Suffix) 1 58" 7 8" 1 58" 8" 7 16" 13 1 8" 5 B Series A Series 8" 7 A-1200-HS-T316SS A-1200-T316SS B-1400-T316SS 5 38" 3 12" 8" 7 AB220 702 Pipe and Rigid or IMC Conduit Clamp B-1400-HS-T316SS 45 3 12" 2 12" AB225 AB203 F-96 AB201 AB205 tnb07_gm102_F_96_97 1/17/08 5:12 PM Page F-97 Special Metals White Painted Products for the Computer Industry (WH Suffix) 1 58" 1 58" 7 8" 8" 7 1 58" 13 B Series 8" 7 A Series 8" 7 B-1400-HS A-1202-HS A-1202 4 78" 2 12" 1 78" 2 2" 1 2" 1 78" AB201 AB201 1 78" AB203 AB219 Metal Framing, Pipe Hangers and Accessories B-1400 A-1200-HS A-1200 16" 2" AW204 AB205 A-3 F-97 tnb07_gm102_F_98_99 1/17/08 5:11 PM Page F-98 Special Metals Metal Framing, Pipe Hangers and Accessories White Painted Products for the Computer Industry (WH Suffix) 1" 3 78" 1 78" 1 34" 1 78" 3 34" 134" AW-205-R AW205 L 1 116" N-205 5 38" a3 12" 7 14" AB-207 AB-206 X-207 5 716" 5 8" 5c" 3 3 12" 3 12" 3 78" 1e" 1 58" 1 58" A210 For attaching A Series channel 1 2132" A218 5 38" AB-219 45 3" 2 516" 3 12" 3 12" 1 116" 5 38" N-219 F-98 AB-220 AB-227-WH tnb07_gm102_F_98_99 1/17/08 5:11 PM Page F-99 Special Metals White Painted Products for the Computer Industry/Clean Room Applications (WH Suffix) 5 38" AB-241 CAT. NO. AB-241-1/4 AB-241-3/8 AB-241-1/2 ROD SIZE STD. CTN. 4 8 1 2 100 100 100 1 3 5 38" 4 Holes 34" Dia. 1 1116" 1 58" 3 12" 1 1116" 3 14" 4" Dia. 3 3 12" 3 12" 6" 6" 6" 4" 3 4 14" 4 14" AP-232SQ AP-232 AP-235 4 Holes 34" Dia. 3 58" 3 516" 1 58" 16" 13 6" 6" 1 14" 4 14" 4 14" 114" 1 8" A804 NEOP WH 158" x 158" White Plastisol End-Cap AP-235SQ 1 58" 5 B 804 NEOP WH 1 58" x 1316" White End-Cap Metal Framing, Pipe Hangers and Accessories AB253 1 58" 3 14 " 1 14" 3 14 " H804 NEOP WH 1 58" x 3 14" White Plastisol End-Cap SPAB-844-PC -- White White Closure Strip For all channels A-3 F-99 tnb07_gm102_F_100_101 1/18/08 9:46 AM Page F-100 Slotted Angle Metal Framing Metal Framing, Pipe Hangers and Accessories With Superangle you Get Flexibility -- Simplicity -- Economy! Superangle Slotted Angle Metal Framing Create the support framing you need. Superangle is manufactured from structural quality steel in three different sizes. The small sizes are 14 ga. steel, the larger size is 12 ga. steel. With this offering, an endless variety of metal framing requirements can be met, from light weight supporting needs to larger shelving for inventory storage. One of the legs on all sizes are 1 5 8" wide, while the other is either 1 5 8", 2 3 8" or 3 1 8" long. Depending on the frame requirements, a single size can be utilized throughout, or the sizes can be interchanged to get the most efficient usage from the material. Installation time is reduced -- inventory space is minimal. Scribe marks are placed every 3 4" which saves planning, layout and cutting time and provides accuracy. The exclusive slot and hole pattern, repeated every 3", is scientifically designed for ease of assembly. The proper nuts and bolts are included with the material to ensure fast and easy erection. Superangle Metal Framing is packaged in 10' and 12' lengths to minimize cutoffs and ensure maximum use of material. 120, 10, 12 lengths of Superangle takes up the same amount of space as one 2 x 4. A standard package includes 5 pieces to a bundle, therefore handling and storage space are significantly reduced. The importance of cutting Superangle easily, quickly and accurately is the key to time saving assembly. The Portable Cutter provides these advantages and makes layout and erection of any structure a light-work job. Finish is designed for long lasting durability. The standard GoldGalv(R) hardware finish is applied to all Superangle products after rolling and punching of the holes. This provides you with a number of benefits. First, raw ends resulting from cuts will be protected by the sacrificial quality of zinc. Second, the edges of all holes are protected against formation of rust, to provide a call back free installation. Third, the electro-galvanizing provides an excellent bonding surface for paint if desired for aesthetic reasons. NOTE: Product is also available with Pre-galvanized (PG) sections F-100 tnb07_gm102_F_100_101 1/18/08 9:46 AM Page F-101 Slotted Angle Metal Framing Superangle Slotted Angle Metal Framing LG. FT. STD. CTN. RA-160-10 RA-160-12 RA-225-10 RA-225-12 RA 300 10 RA-300-12 10' 12' 10' 12' 10' 12' 50 60 50 60 50 60 1,000 1,200 1,000 1,200 1,000 1,200 RA-300 12 Gauge RA-225 14 Gauge RA-160 14 Gauge 5 LGS. 36 Nuts and Bolts Superangle Accessories Casters CAT. NO. PACKAGE RA RC RA SC STD. CTN. 2 2 2 2 CAT. NO. PACKAGE STD. CTN. RA C 1 1 PACKAGE STD. CTN. 25 100 PACKAGE 100 SETS STD. CTN. 3 8"-16 x 5 8" lg. 100 3 8"-16 x 3 4" lg. 100 RA-RC RA-SC Rigid & Swivel Casters Hard rubber composition 3 12" dia. with load rating of 225 lbs. per wheel. Portable Cutter RA-C Portable Cutter Metal Framing, Pipe Hangers and Accessories CAT. NO. Gusset Plate CAT. NO. RA GP RA-GP Gusset Plate For extra rigid assembly. Extra Nuts and Bolts CAT. NO. RA BN 5/8 Use with RA-160 & RA-225 RA BN 3/4 Use with RA-300. Extra Nuts and Bolts A-3 F-101 tnb07_gm102_F_102_103 1/18/08 9:46 AM Page F-102 Metal Framing Engineering Data Metal Framing, Pipe Hangers and Accessories Design Data -- Metal Framing Channel Elements of Sections Nominal Thickness (IN.) W Y W Y X X Z X H X 12 ga. = .105 I -- Moment of Inertia 14 ga. = .075 S -- Section of Modulas 16 ga. = .060 r -- Radius of Gyration Z H Z -- Nominal Axis A -- Area Y Y Single Channels Double Channels Table 1 -- Properties for Design: Single Channel CAT. NO. A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 H IN. W IN. A IN.2 I IN.4 S IN.3 R IN. X-X AXIS Z IN. I IN.4 S IN.3 Y-Y AXIS R IN. 1.625 .813 1.375 2.438 3.250 1.625 .813 1.625 1.625 1.625 1.625 1.625 1.625 1.625 .557 .381 .500 .726 .897 .401 .280 .192 .031 .121 .529 1.100 .134 .024 .212 .063 .155 .399 .635 .146 .051 .587 .283 .492 .853 1.107 .577 .295 .719 .331 .595 1.112 1.507 .707 .338 .237 .137 .205 .335 .436 .184 .103 .292 .168 .252 .413 .536 .226 .127 .652 .600 .640 .679 .697 .677 .607 Table 1 -- Properties for Design: Double Channel CAT. NO. A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 H IN. W IN. A IN.2 I IN.4 S IN.3 R IN. X-X AXIS Z IN. I IN.4 S IN.3 Y-Y AXIS R IN. 3.250 1.626 2.750 4.876 6.500 3.250 1.626 1.625 1.625 1.625 1.625 1.625 1.625 1.625 1.114 .762 1.000 1.450 1.794 .801 .560 .948 .147 .595 2.854 6.273 .668 .112 .583 .181 .433 1.171 1.930 .411 .138 .992 .439 .772 1.402 1.870 .913 .447 1.625 .813 1.375 2.438 3.250 1.625 .813 .474 .274 .409 .672 .871 .367 .206 .584 .337 .504 .827 1.072 .452 .254 .652 .600 .640 .680 .697 .677 .607 Table 2 -- Load Ratings for 1 2" Strut Nuts used in Superstrut Channel CHANNEL NO. A-1200 C-1200 B-1200 A-1400 B-1400 Safety Factor of 3 F-102 SLIP RESISTANCE LBS. PULL OUT STRENGTH LBS. 1,500 1,500 1,400 1,000 1,000 2,000 2,000 1,400 1,400 1,400 If connections will be subjected to dynamic or seismic loading conditions, contact the factory for design assistance. tnb07_gm102_F_102_103 1/18/08 9:46 AM Page F-103 Metal Framing Engineering Data Design Data -- Metal Framing Channel (continued) Design Loads for Channel Used as Beam or Column. Table 3 Beam Loads Table 3 contains simple beam, uniformly-distributed loads calculated at 25,000 psi fiber stress. Beam loads are based on channel being loaded across the x-x axis. Loads are also listed at reduced deflections for long spans. Maximum allowable deflections and maximum uniform loads for all spans @ 25,000 psi fiber stress. Reduced load for all 1/180 Span Deflection For moderate deflections on the longer spans, reduced loads are listed which will produce a deflection equal to 1/180 of the span. When maximum loads do not induce deflections exceeding 1/180 x the span length reduced loads are not required. Reduced load for 1/360 Span Deflection For very slight deflections on the longer spans, reduced loads are listed which will produce a deflection equal to 1/360 of the span. When maximum loads do not induce deflections exceeding 1/360 x the span length reduced loads are not required. Concentrated loads To obtain values for concentrated loads from Table 3, multiply uniform load by 0.5 and deflection by 1.25. Slotted, Punched or KO Channel Reduce load rating 5%. Long span deep beams Support in a manner to prevent rotation at supports and tie between supports to prevent twist. Column Loads Allowable column loads given are for uniform axial loading with pinned ends. For eccentric loading or other end conditions reduce allowable loads according to standard engineering practice. Metal Framing, Pipe Hangers and Accessories Maximum loads @ 25,000 psi stress Dynamic Loads Allowable dynamic loads may be calculated by dividing the static loads shown in Table 3, by 2.08. A-3 F-103 tnb07_gm102_F_104_105 1/18/08 9:47 AM Page F-104 Metal Framing Engineering Data Design Data -- Metal Framing Channel Metal Framing, Pipe Hangers and Accessories Table 3 -- Single Channel CAT. NO. DEPTH GA. LOAD 12 12 12 12 12 14 14 1/180 SPAN 1/360 SPAN DEFL. COL. LOAD -- -- -- -- -- -- -- .033 .033 .033 .033 .033 .033 .033 10,533 6,683 9,345 13,830 17,106 7,575 4,950 .100 .100 .100 .100 .100 .100 .100 -- -- -- -- -- -- 453 .050 .050 .050 .050 .050 .050 .050 10,2100 6,058 8,970 13,482 16,693 7,334 4,150 -- -- -- -- -- -- -- .133 .133 .133 .133 .133 .133 .133 -- 333 -- -- -- -- 258 .067 .067 .067 .067 .067 .067 .067 9,842 5,315 8,545 13,082 16,277 7,058 4,000 -- -- -- -- -- -- -- .167 .167 1.67 .167 .167 .167 .167 -- 266 1,040 -- -- -- 165 .083 .083 .083 .083 .083 .083 .083 9,419 4,465 8,060 12,640 15,698 6,753 3,420 DEFL. LOAD DEFL. LOAD 3,534 1,050 2,584 6,650 10,583 2,434 850 .014 .026 .016 .010 .008 .015 .028 -- -- -- -- -- -- -- .067 .067 .067 .067 .067 .067 .067 12 12 12 12 12 14 14 2,355 700 1,723 4,434 7,055 1,623 566 .033 .059 .038 .023 .016 .031 .063 -- -- -- -- -- -- -- 12 12 12 12 12 14 14 1,766 525 1,291 3,325 5,291 1,216 425 .058 .105 .066 .039 .030 .056 .110 12 12 12 12 12 14 14 1,414 420 1,034 2,660 4,234 974 340 .089 .164 .104 .063 .046 .088 .172 12" Beam or Column A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 15 8 16 13 8 2 7 16 3 1 4 15 8 13 16 13 18" Beam or Column A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 15 8 16 13 8 2 7 16 3 1 4 15 8 13 16 13 24" Beam or Column A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 15 8 16 13 8 2 7 16 3 1 4 15 8 13 16 13 30" Beam or Column A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 15 8 16 13 8 2 7 16 3 1 4 15 8 13 16 13 When no numbers are shown, use the maximum uniform load Deflections are given in inches; loads in lbs. F-104 MAXIMUM UNIFORM tnb07_gm102_F_104_105 1/18/08 9:47 AM Page F-105 Metal Framing Engineering Data Design Data -- Metal Framing Channel Table 3 -- Double Channel (Single Channels Welded Back-to-Back) CAT. NO. DEPTH GA. LOAD 31 4 15 8 23 4 47 8 61 2 31 4 15 8 12 12 12 12 12 14 14 31 4 15 8 23 4 47 8 61 2 31 4 15 8 MAXIMUM UNIFORM 1/180 SPAN 1/360 SPAN DEFL. COL. LOAD -- -- -- -- -- -- -- .033 .033 .033 .033 .033 .033 .033 21,177 14,110 18,990 27,623 34,210 15,250 10,390 .100 .100 .100 .100 .100 .100 .100 -- -- -- -- -- -- -- .050 .050 .050 .050 .050 .050 .050 20,609 13,440 18,470 16,926 33,390 14,867 9,910 -- -- -- -- -- -- -- .133 .133 .133 .133 .133 .133 .133 -- -- -- -- -- -- -- .067 .067 .067 .067 .067 .067 .067 19,974 12,670 17,890 26,143 32,435 14,426 9,350 -- -- -- -- -- -- -- .167 .167 .167 .167 .167 .167 .167 -- -- -- -- -- -- -- .083 .083 .083 .083 .083 .083 .083 19,261 11,803 17,230 25,259 31,395 13,937 8,730 DEFL. LOAD DEFL. LOAD -- 3,016 -- -- -- -- 2,300 .008 .016 .010 .005 .004 .008 .016 -- -- -- -- -- -- -- .067 .067 .067 .067 .067 .067 .067 12 12 12 12 12 14 14 -- 2,011 4,811 -- -- -- 1,534 .018 .036 .021 .013 .009 .018 .036 -- -- -- -- -- -- -- 31 4 15 8 23 4 47 8 61 2 31 4 15 8 12 12 12 12 12 14 14 4,858 1,509 3,609 -- -- 3,425 1,150 .031 .064 .038 .021 .016 .033 .064 31 4 15 8 23 4 47 8 61 2 31 4 15 8 12 12 12 12 12 14 14 3,886 1,206 2,886 7,806 .049 .100 .059 .034 .025 .050 .100 12" Beam or Column 18" Beam or Column A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 24" Beam or Column A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 30" Beam or Column A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 2,740 920 Metal Framing, Pipe Hangers and Accessories A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 When no numbers are shown, use the maximum uniform load Deflections are given in inches; loads in lbs. A-3 F-105 tnb07_gm102_F_106_107 1/18/08 9:47 AM Page F-106 Metal Framing Engineering Data Design Data -- Metal Framing Channel Metal Framing, Pipe Hangers and Accessories Table 3 -- Single Channel CAT. NO. DEPTH GA. LOAD 15 8 16 13 8 27 16 31 4 15 8 13 16 12 12 12 12 12 14 14 15 8 16 13 8 27 16 31 4 15 8 13 16 1/180 SPAN 1/360 SPAN DEFL. COL. LOAD 917 148 578 -- -- 640 115 .100 .100 .100 .100 .100 .100 .100 8,962 3,498 7,525 12,160 15,132 6,416 2,755 .233 .233 .233 .233 .233 .233 .233 674 109 425 -- -- 470 84 .117 .117 .117 .117 .117 .117 .117 8,466 2,579 6,945 11,698 14,514 6,051 2,060 -- 167 -- -- -- -- 129 .267 .267 .267 .267 .267 .267 .267 516 83 325 -- -- 360 64 .133 .133 .133 .133 .133 .133 .133 7,943 1,981 6,325 11,092 13,850 5,658 1,580 -- 132 -- -- -- -- 102 .300 .300 .300 .300 .300 .300 .300 408 66 257 1,123 -- 284 51 .150 .150 .150 .150 .150 .150 .150 7,369 1,555 5,650 10,505 13,150 5,241 1,250 DEFL. LOAD DEFL. LOAD 1,178 350 861 2,216 3,528 811 284 .129 .236 .149 .088 .068 .126 .248 -- -- -- -- -- -- -- .200 .200 .200 .200 .200 .200 .200 12 12 12 12 12 14 14 1,010 300 738 1,900 3,024 695 243 .175 .323 .203 .120 .091 .160 .336 -- 217 -- -- -- -- 168 15 8 16 13 8 27 16 31 4 15 8 13 16 12 12 12 12 12 14 14 884 263 646 1,663 2,646 609 213 .228 .420 .265 .156 .120 .120 .440 15 8 16 13 8 27 16 31 4 15 8 13 16 12 12 12 12 12 14 14 785 234 574 1,478 2,351 541 189 .289 .533 .335 .198 .151 .286 .556 36" Beam or Column A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 13 42" Beam or Column A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 13 48" Beam or Column A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 13 54" Beam or Column A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 13 When no numbers are shown, use the maximum uniform load. Deflections are given in inches; loads in lbs. F-106 MAXIMUM UNIFORM tnb07_gm102_F_106_107 1/18/08 9:47 AM Page F-107 Metal Framing Engineering Data Design Data -- Metal Framing Channel Table 3 -- Double Channel (Single Channels Welded Back-to-Back) CAT. NO. DEPTH GA. LOAD 31 4 15 8 23 4 47 8 61 2 31 4 15 8 12 12 12 12 12 14 14 3,239 1,005 2,400 6,505 31 4 15 8 23 4 47 8 61 2 31 4 15 8 MAXIMUM UNIFORM 1/180 SPAN 1/360 SPAN DEFL. COL. LOAD -- 702 -- -- -- -- 535 .100 .100 .100 .100 .100 .100 .100 18,470 10,840 16,500 24,316 30,265 13,416 8,050 .233 .233 .233 .233 .233 .233 .233 -- 516 -- -- -- -- 393 .117 .117 .117 .117 .117 .117 .117 17,635 9,790 15,730 23,272 29,025 12,832 7,300 -- -- -- -- -- -- -- .267 .267 .267 .267 .267 .267 .267 -- 395 -- -- -- -- 301 .133 .133 .133 .133 .133 .133 .133 16,730 8,640 14,890 22,170 27,700 12,223 6,480 -- -- -- -- -- -- -- .300 .300 .300 .300 .300 .300 .300 -- 312 1,263 -- -- -- 238 .150 .150 .150 .150 .150 .150 .150 15,763 7,405 13,990 20,980 16,280 11,566 5,580 DEFL. LOAD DEFL. LOAD 2,284 766 .071 .144 .085 .048 .036 .071 .144 -- -- -- -- -- -- -- .200 .200 .200 .200 .200 .200 .200 12 12 12 12 12 14 14 2,776 863 2,063 5,576 9,190 1,958 658 .098 .195 .115 .065 .049 .225 .195 -- -- -- -- -- -- -- 31 4 15 8 23 4 47 8 61 2 31 4 15 8 12 12 12 12 12 14 14 2,429 754 1,804 4,879 8,041 1,713 575 .128 .255 .151 .085 .064 .128 .255 31 4 15 8 23 4 47 8 61 2 31 4 15 8 12 12 12 12 12 14 14 2,159 670 1,604 4,338 7,149 1,523 511 .161 .323 .190 .108 .081 .161 .323 36" Beam or Column 42" Beam or Column A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 48" Beam or Column A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 54" Beam or Column A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 Metal Framing, Pipe Hangers and Accessories A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 When no numbers are shown, use the maximum uniform load. Deflections are given in inches; loads in lbs. A-3 F-107 tnb07_gm102_F_108_109 1/18/08 9:45 AM Page F-108 Metal Framing Engineering Data Design Data -- Metal Framing Channel Metal Framing, Pipe Hangers and Accessories Table 3 -- Single Channel CAT. NO. DEPTH GA. LOAD 15 8 16 13 8 27 16 31 4 15 8 13 16 12 12 12 12 12 14 14 15 8 16 13 8 27 16 31 4 15 8 13 16 1/180 SPAN 1/360 SPAN DEFL. COL. LOAD 330 53 208 909 -- 231 41 .167 .167 .167 .167 .167 .167 .167 6,762 -- 4,920 9,874 12,406 4,792 -- .367 .367 .367 .367 .367 .367 .367 273 44 172 753 -- 190 35 .183 .183 .183 .183 .183 .183 .183 6,127 -- 4,145 9,211 11,616 4,311 -- 459 74 289 -- -- 320 57 .400 .400 .400 .400 .400 .400 .400 299 37 144 632 1,313 160 29 .200 .200 .200 .200 .200 .200 200 5,436 -- 3,485 8,509 10,782 3,809 -- 337 54 212 -- -- 235 42 .467 .467 .467 .467 .467 .467 .467 168 27 106 464 965 118 21 .233 .233 .233 .233 .233 .233 .233 4,061 -- 2,565 6,991 8,988 2,827 -- DEFL. LOAD DEFL. LOAD 706 210 516 1,330 2,116 486 170 .358 .658 .414 .244 .186 .353 .687 -- 107 -- -- -- -- 82 .333 .333 .333 .333 .333 .333 .333 12 12 12 12 12 14 14 643 191 470 1,210 1,924 443 155 .432 .795 .501 .295 .226 .426 .831 -- 88 344 -- -- -- 68 15 8 16 13 8 27 16 31 4 15 8 13 16 12 12 12 12 12 14 14 589 175 430 1,108 1,839 405 141 .514 .946 .595 .351 .269 .506 .989 15 8 16 13 8 27 16 31 4 15 8 13 16 12 12 12 12 12 14 14 505 -- 369 950 1,513 348 -- .700 -- .811 .479 .366 .691 -- 60" Beam or Column A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 13 66" Beam or Column A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 13 72" Beam or Column A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 13 84" Beam or Column A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 13 When no numbers are shown, use the maximum uniform load Deflections are given in inches; loads in lbs. F-108 MAXIMUM UNIFORM tnb07_gm102_F_108_109 1/18/08 9:45 AM Page F-109 Metal Framing Engineering Data Design Data -- Metal Framing Channel Table 3 -- Double Channel (Single Channels Welded Back-to-Back) CAT. NO. DEPTH GA. LOAD 31 4 15 8 23 4 47 8 61 2 31 4 15 8 12 12 12 12 12 14 14 31 4 15 8 23 4 47 8 61 2 31 4 15 8 MAXIMUM UNIFORM 1/180 SPAN 1/360 SPAN DEFL. COL. LOAD -- 253 1,023 -- -- -- 193 .167 .167 .167 .167 .167 .167 .167 14,738 6,100 13,050 19,734 24,810 10,878 4,640 .367 .367 .367 .367 .367 .367 .367 1,347 209 846 -- -- 949 159 .183 .183 .183 .183 .183 .183 .183 13,646 5,055 12,030 18,415 23,230 10,133 3,840 -- 351 -- -- -- -- 267 .400 .400 .400 .400 .400 .400 .400 1,132 176 710 -- -- 798 134 .200 .200 .200 .200 .200 .200 .200 12,500 4,230 10,980 17,023 21,560 9,340 3,220 -- 258 -- -- -- -- 197 .467 .467 .467 .467 .467 .467 .467 832 129 522 -- -- 586 98 .233 .233 .233 .233 .233 .233 .233 9,992 3100 8,670 13,993 17,975 7,682 2,370 DEFL. LOAD DEFL. LOAD 1,944 604 1,444 3,904 6,434 1,370 460 .199 .398 .235 .133 .100 .199 .399 -- -- -- -- -- -- -- .33 .333 .333 .333 .333 .333 .333 12 12 12 12 12 14 14 1,766 549 1,313 3,549 5,849 1,245 419 .240 .481 .285 .180 .120 .241 .483 -- 418 -- -- -- -- 318 31 4 15 8 23 4 47 8 61 2 31 4 15 8 12 12 12 12 12 14 14 1,620 503 1,203 3,253 5,361 1,141 384 .286 .574 .339 .191 .143 .286 .574 31 4 15 8 23 4 47 8 61 2 31 4 15 8 12 12 12 12 12 14 14 1,388 431 1,031 2,788 4,595 979 329 .390 .780 .461 .260 .195 .390 .781 60" Beam or Column 66" Beam or Column A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 72" Beam or Column A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 84" Beam or Column A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 Metal Framing, Pipe Hangers and Accessories A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 When no numbers are shown, use the maximum uniform load Deflections are given in inches; loads in lbs. A-3 F-109 tnb07_gm102_F_110_111 1/18/08 9:44 AM Page F-110 Metal Framing Engineering Data Design Data -- Metal Framing Channel Metal Framing, Pipe Hangers and Accessories Table 3 -- Single Channel CAT. NO. DEPTH GA. LOAD 15 8 16 13 8 2 7 16 3 1 4 15 8 13 16 12 12 12 12 12 14 14 15 8 16 13 8 2 7 16 3 1 4 15 8 13 16 1/180 SPAN 1/360 SPAN DEFL. COL. LOAD 129 21 81 355 739 90 16 .267 .267 .267 .267 .267 .267 .267 3,108 -- 1,960 5,423 7,059 2,615 -- .600 .600 .600 .600 .600 .600 .600 102 16 64 281 584 71 13 .300 .300 .300 .300 .300 .300 .300 2,456 -- -- 4,291 5,579 1,708 -- 165 27 104 455 -- 114 21 .667 .667 .667 .667 .667 .667 .667 83 13 52 227 473 57 10 .333 .333 .333 .333 .333 .333 .33 -- -- -- 3,478 4,521 -- -- 115 72 315 657 80 .800 .800 .800 .800 .800 57 36 158 328 40 .400 .400 .400 .400 .400 -- -- -- -- -- DEFL. LOAD DEFL. LOAD 441 -- 323 831 1,323 304 -- .914 -- 1.059 .730 .478 .903 -- 258 42 163 -- -- 180 32 .533 .533 .533 .533 .533 .533 .533 12 12 12 12 12 14 14 393 -- 288 739 1,176 270 -- 1.156 -- 1.350 .790 .605 1.141 -- 204 33 128 561 -- 142 25 15 8 16 13 8 2 7 16 3 1 4 15 8 13 16 12 12 12 12 12 14 14 354 -- 259 665 1,059 244 -- 1.425 -- 1.663 .976 .746 1.413 -- 15 8 13 8 2 7 16 3 1 4 15 8 12 12 12 12 14 -- -- 554 883 -- -- -- 1.400 1.075 -- 96" Beam or Column A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 13 108" Beam or Column A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 13 120" Beam or Column A-1200 B-1200 C-1200 E-1200 H-1200 A-1400 B-1400 13 144" Beam or Column A-1200 C-1200 E-1200 H-1200 A-1400 When no numbers are shown, use the maximum uniform load Deflections are given in inches; loads in lbs. F-110 MAXIMUM UNIFORM tnb07_gm102_F_110_111 1/18/08 9:44 AM Page F-111 Metal Framing Engineering Data Design Data -- Metal Framing Channel Table 3 -- Double Channel (Single Channels Welded Back-to-Back) CAT. NO. DEPTH GA. LOAD 3 1 4 15 8 2 3 4 4 7 8 6 1 2 31 4 15 8 12 12 12 12 12 14 14 31 4 15 8 2 3 4 47 8 6 1 2 31 4 15 8 MAXIMUM UNIFORM 1/180 SPAN 1/360 SPAN DEFL. COL. LOAD 637 99 400 1,917 -- 449 75 .267 .267 .267 .267 .267 .267 .267 7,675 -- 6,640 10,875 14,120 5,951 -- .600 .600 .600 .600 .600 .600 .600 503 78 316 1,515 -- 355 59 .300 .300 .300 .300 .300 .300 .300 6,071 -- 5,250 8,599 11,160 4,702 -- -- 126 512 -- -- -- 96 .667 .667 .667 .667 .667 .667 .667 408 63 256 1,227 -- 287 48 .333 .333 .333 .333 .333 .333 .333 -- -- 4,250 6,946 9,040 3,805 -- 566 88 355 -- -- 399 67 .800 .800 .800 .800 .800 .800 .800 283 44 178 852 1,873 199 33 .400 .400 .400 .400 .400 .400 .400 -- -- -- -- -- -- -- DEFL. LOAD DEFL. LOAD 1,215 378 903 2,440 4,021 856 288 .509 1.019 .603 .340 .255 .509 1.020 -- 197 -- -- -- -- 150 .533 .533 .533 .533 .533 .533 .533 12 12 12 12 12 14 14 1,080 355 801 2,169 3,574 761 255 .644 1,290 .763 .430 .323 .644 1.290 -- 156 632 -- -- -- 119 31 4 15 8 2 3 4 47 8 6 1 2 31 4 15 8 12 12 12 12 12 14 14 971 301 721 1,951 3,216 685 230 .795 1.588 .941 .531 .398 .796 1.600 31 4 15 8 2 3 4 47 8 6 1 2 31 4 15 8 12 12 12 12 12 14 14 810 -- 601 1,626 2,680 571 -- 1.145 -- 1.350 .764 .573 1.146 -- 96" Beam or Column 108" Beam or Column A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 120" Beam or Column A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 144" Beam or Column A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 Metal Framing, Pipe Hangers and Accessories A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 When no numbers are shown, use the maximum uniform load Deflections are given in inches; loads in lbs. A-3 F-111 tnb07_gm102_F_112_113 1/18/08 9:46 AM Page F-112 Metal Framing Engineering Data Design Data -- Metal Framing Channel Metal Framing, Pipe Hangers and Accessories Table 3 -- Single Channel F-112 CAT. NO. DEPTH GA. LOAD 15 8 13 8 27 16 31 4 15 8 12 12 12 12 14 27 16 31 4 MAXIMUM UNIFORM 1/180 SPAN 1/360 SPAN DEFL. COL. LOAD 42 27 116 241 30 .467 .467 .467 .467 .467 -- -- -- -- -- 1.07 1.07 89 185 .533 .533 -- -- 140 292 1.20 1.20 70 146 .600 .600 -- -- 114 236 .334 .334 57 118 .667 .667 -- -- DEFL. LOAD DEFL. LOAD -- -- 475 756 -- -- -- 1.912 1.463 -- 84 53 233 482 60 .933 .933 .933 .933 .933 12 12 -- 661 -- 1.91 178 369 27 16 31 4 12 12 -- -- -- -- 240" Beam or Column E-1200 27 16 H-1200 31 4 12 12 -- -- -- -- 168" Beam or Column A-1200 C-1200 E-1200 H-1200 A-1400 192" Beam or Column E-1200 H-1200 216" Beam or Column E-1200 H-1200 When no numbers are shown, use the maximum uniform load Deflections are given in inches; loads in lbs. tnb07_gm102_F_112_113 1/18/08 9:46 AM Page F-113 Metal Framing Engineering Data Design Data -- Metal Framing Channel Table 3 -- Double Channel (Single Channels Welded Back-to-Back) CAT. NO. DEPTH GA. LOAD 31 4 15 8 23 4 47 8 61 2 31 4 15 8 12 12 12 12 12 14 14 31 4 -- 23 4 47 8 61 2 31 4 -- MAXIMUM UNIFORM 1/180 SPAN 1/360 SPAN DEFL. COL. LOAD 208 32 130 626 1,326 147 25 .467 .467 .467 .467 .467 .467 .467 -- -- -- -- -- -- -- 1.07 -- 1.07 1.07 1.07 1.07 -- 159 -- 100 479 1,053 112 -- .533 -- .533 .533 .533 .533 -- -- -- -- -- -- -- -- 252 -- 158 757 -- 177 -- 1.20 -- 1.20 1.20 1.20 1.20 -- 126 -- 79 379 832 89 -- .600 -- .600 .600 .600 .600 -- -- -- -- -- -- -- -- 204 -- 128 613 -- 144 -- 1.33 -- 1.33 1.33 1.33 1.33 -- 102 -- 64 307 674 72 -- .667 -- .667 .667 .667 .667 -- -- -- -- -- -- -- -- DEFL. LOAD DEFL. LOAD 694 -- 515 1,394 2,298 489 -- 1.563 -- 1.850 1.040 .780 1.563 -- 916 64 261 1,255 -- 293 49 .933 .933 .933 .933 .933 .933 .933 12 -- 12 12 12 14 -- -- -- -- 1,220 2,010 -- -- -- -- -- 1.363 1.019 -- -- 318 -- 200 958 -- 224 -- 31 4 -- 23 4 47 8 61 2 31 4 -- 12 -- 12 12 12 14 -- -- -- -- 1,084 1,788 -- -- -- -- -- 1.725 1.288 -- -- 3 1 4 -- 2 3 4 4 7 8 6 1 2 3 1 4 -- 12 -- 12 12 12 14 -- -- -- -- -- 1,609 -- -- -- -- 1.588 -- -- 168" Beam or Column 192" Beam or Column A-1202 -- C-1202 E-1202 H-1202 A-1402 -- 216" Beam or Column A-1202 -- C-1202 E-1202 H-1202 A-1402 -- 240" Beam or Column A-1202 -- C-1202 E-1202 H-1202 A-1402 -- Metal Framing, Pipe Hangers and Accessories A-1202 B-1202 C-1202 E-1202 H-1202 A-1402 B-1402 When no numbers are shown, use the maximum uniform load Deflections are given in inches; loads in lbs. A-3 F-113 tnb07_gm102_F_114_115 1/18/08 9:46 AM Page F-114 Metal Framing Engineering Data Design Data -- Metal Framing Channel Metal Framing, Pipe Hangers and Accessories Table 4 -- Safe Bearing Loads for 15 8" Channel and Combinations SECTION RECOMMENDED LOAD IN LBS. SECTION RECOMMENDED LOAD IN LBS. SECTION RECOMMENDED LOAD IN LBS. A-1200 A-1400 B-1200 B-1400 C-1200 E-1200 H-1200 5,000 3,500 6,000 3,400 5,000 5,000 4,000 A-1200 A-1400 B-1200 B-1400 C-1200 E-1200 H-1200 3,500 2,500 4,000 2,600 3,500 3,500 2,000 A-1200 A-1400 B-1200 B-1400 C-1200 E-1200 H-1200 8,000 5,500 9,000 4,800 8,000 8,000 5,500 Safety factor of 2 1 2 Table 5 -- Design Load Table for Typical Channel Connections Safety factor of 2 1 2 based on ultimate strength of the connection. Load diagrams indicate up to three design loads, for 12 gauge, 14 gauge and 16 gauge channel applications. 90 Fittings (When used in position shown). Both ends supported. Both ends supported. A-1200 A-1400 A-1200 A-1400 1,500 lbs. 1,000 lbs. AB-202 2,000 lbs. 1,500 lbs. AB-203 AB-201 700 lbs. AB-203 700 lbs. Both ends supported. Both ends supported. A-1200 A-1400 A-1200 A-1400 3,000 lbs. 2,000 lbs. 1,000 lbs. 650 lbs. AB-200 AB-213 AB-214 AB-202 Both ends supported. A-1200 A-1400 Both ends supported. A-1200 A-1400 2,000 lbs. 2,000 lbs. Flat Plate Fittings AB-206 AB-205 AB-216 F-114 AB-204 AB-215 Both ends supported. A-1200 A-1400 1,500 lbs. 1,000 lbs. 1,500 lbs. 1,000 lbs. 800 lbs. tnb07_gm102_F_114_115 1/18/08 9:46 AM Page F-115 Metal Framing Engineering Data Design Applications Cantilever Beams Beams Fixed on One End, Supported at Other Metal Framing, Pipe Hangers and Accessories Simple Beams Beams Fixed at Both Ends A-3 F-115 tnb07_gm102_F_116_117 1/18/08 9:45 AM Page F-116 Metal Framing Engineering Data Metal Framing, Pipe Hangers and Accessories Design Applications Load tables on page F-53-F-59 for A, B, C, E and H series channel are for single span beams supported at the ends. These can be used in the majority of cases. There are times when it is necessary to know what happens with other loading and support conditions. Some common arrangements are shown in Table 6. Simply multiply the loads from the Design Load Tables times the factors given in Table 6. Examples shown on page F-117. Table 6 -- Conversion Factors for Beams with Various Static Loading Conditions LOAD FACTOR DEFLECTION FACTOR 1. Simple Beam -- Uniform Load 1.00 1.00 2. Simple Beam -- Concentrated Load at Center .50 1.25 3. Simple Beam -- Two Equal Concentrated Loads at b Points 1.00 1.10 4. Beam Fixed at Both Ends -- Uniform Load 1.50 .30 5. Beam fixed at Both Ends -- Concentrated Load at Center 1.00 .40 6. Cantilever Beam -- Uniform Load .25 2.40 7. Cantilever Beam -- Concentrated Load at End .12 3.20 1.30 .92 9. Continuous Beam -- Two Equal Spans 1.00 .42 10. Continuous Beam -- Two Equal Spans -- Concentrated Load at Center of One Span .62 .71 11. Continuous Beam -- Two Equal Spans -- Concentrated Load at Center of Both Spans .67 .48 LOAD AND SUPPORT CONDITION 8. Continuous Beam -- Two Equal Spans -- Uniform Load on One Span F-116 Span Span tnb07_gm102_F_116_117 1/18/08 9:45 AM Page F-117 Metal Framing Engineering Data Design Applications EXAMPLE I PROBLEM: Determine the load and deflection of an A-1200 beam continuous 5"-0" 5"-0" over one support and loaded uniformly on one span. SOLUTION: A. From load table 3 for A-1200 the load for a 5'0" span is 706 lbs. and deflection is .358". Load = 706 lbs. x 1.30 = 917.8 lbs. Deflection = .358 x .92 = .329" EXAMPLE II PROBLEM: Determine load and deflection of an E-1200 cantilever beam with a concentrated load on the end. 3"-0" SOLUTION: A. From load table 3 for E-1200 the load for a 3'0" span is 2216 lbs. and deflection is .088". B. Multiply by factors from Table 6. Load = 2216 lbs. x .12 = 265.9 lbs. Deflection = .088 x 3.20 = .282" COLUMN LOADING Illustration 1 The load bearing capacity of column or compression members is a function of the inherent configurational strength, the unbraced length and design of the end connections. Column Height Values of axial column loading given in Table 3 were calculated using a rotationally free and translation fixed correction at each end (see illustration I). This gives an end condition constant (K) of 1. If other end conditions are used, axial loading should be calculated using procedures in the AISI specification for the design of cold formed steel structural members (SG671) and the engineering values for Superstrut channel given in Table 1. K Value .65 .80 Metal Framing, Pipe Hangers and Accessories B. Multiply by factors from Table 6. 1.0 End Condition Code Rotation fixed and translation fixed Rotation free and translation fixed Rotation fixed and translation free A-3 F-117 tnb07_gm102_F_118_119 1/18/08 9:45 AM Page F-118 Metal Framing Engineering Data Metal Framing, Pipe Hangers and Accessories Design Applications NOMINAL ROD DIA. DIMENSIONS (IN.) -- LOADS NOMINAL ROOT AREA ROD DIA. THREAD DIMENSIONS (IN.) -- LOADS ROOT AREA THREAD 8 2 5 8 3 4 7 8 3 4 to 2 21 2 to 31 2 4 to 5 6 8 to 12 .068 .126 .202 .302 .419 1 1 8 2 5 8 3 4 7 8 1 1 Safety factor of 5 Safety factor of 5 Table 9 -- Maximum Spacing between Pipe Supports Steel Pipe Nom. Pipe Size (IN.) Max. Spacing (FT.) 1 2 5 3 4 6 1 7 11 2 9 2 10 21 2 11 3 12 31 2 13 4 14 5 16 2 5 3 4 6 1 6 11 4 7 11 2 8 2 9 21 2 10 3 10 31 2 11 4 12 6 17 8 19 10 22 12 23 14 25 16 27 18 28 20 30 24 32 Copper Size Nom. Pipe Size (IN.) Max. Spacing (FT.) 1 Table 10 -- Minimum Spacing (In.) between Centers of Standard Pipe When Using Superstrut #702 Pipe Straps NOM. PIPE SIZE 1 2 3764 1 1-14 1-1 2 2 2-1 2 3 3-1 2 4 5 6 8 2 3 4 1 11 4 11 2 2 21 2 3 31 2 4 6 8 1 3 16 1 5 16 1 1 2 1 3 4 1 15 16 2 3 16 2 7 16 2 13 16 31 8 3 7 16 43 4 5 7 16 -- 1 7 16 15 8 17 8 2 1 16 2 5 16 2 9 16 2 15 16 31 4 3 9 16 47 8 6 -- -- 13 4 2 2 3 16 21 2 23 4 3 1 16 3 1 8 3 15 16 5 61 8 -- -- -- 21 4 2 7 16 2 3 4 3 3 5 16 35 8 4 1 16 51 4 61 8 -- -- -- -- 2 9 16 27 8 31 8 3 7 16 33 4 41 8 51 8 61 2 -- -- -- -- -- 31 8 3 1 8 33 4 4 1 16 45 8 51 8 63 4 -- -- -- -- -- -- 35 8 4 4 5 16 4 15 16 57 8 7 -- -- -- -- -- -- -- 4 5 16 45 8 51 4 6 3 16 7 5 16 -- -- -- -- -- -- -- -- 4 15 16 5 9 16 61 2 75 8 -- -- -- -- -- -- -- -- -- -- 6 3 16 8 -- -- -- -- -- -- -- -- -- -- 7 7 16 8 9 16 -- -- -- -- -- -- -- -- -- -- 81 8 91 4 -- -- -- -- -- -- -- -- -- -- -- 10 1 8 1 F-118 Table 8 -- Rod Size Determined by Pipe Size for Fire Protection Table 7 -- Load Carrying Capacities of Hot Rolled Steel Rod tnb07_gm102_F_118_119 1/18/08 9:45 AM Page F-119 Metal Framing Engineering Data Design Applications Table 11 -- Standard Dimensions and Weights of Piping Materials and Conduit NOMINAL STD. PIPE SIZE (IN.) MECHANICAL (SCHEDULE 40) 3 NOMINAL CONDUIT SIZE COUPLING O.D. (IN.) .84 1.05 1.32 1.66 1.90 2.38 2.88 3.50 4.00 4.50 5.56 6.63 8.63 10.75 12.75 14.00 16.00 18.00 20.00 22.00 24.00 26.00 28.00 30.00 1.06 1.31 1.58 1.90 2.20 2.75 3.25 4.00 4.63 5.00 6.30 7.39 9.23 -- -- -- -- -- -- -- -- -- -- -- ELECTRICAL CONDUIT RIGID STEEL CONDUIT O.D. (IN.) THIN WALL (EMT) CONDUIT O.D. (IN.) .84 1.05 1.32 1.66 2.38 2.88 3.50 4.50 .71 .92 1.16 1.51 2.20 2.88 3.50 4.50 2 4 1 11 4 2 21 2 3 4 1 3 Metal Framing, Pipe Hangers and Accessories 2 4 1 11 4 11 2 2 21 2 3 31 2 4 5 6 8 10 12 14 16 18 20 22 24 26 28 30 1 PIPE O.D. (IN.) * Includes weight of heaviest conductor combination A-3 F-119 tnb07_gm102_F_120_121 1/18/08 9:44 AM Page F-120 Metal Framing Engineering Data Design Applications Metal Framing, Pipe Hangers and Accessories Table 12 -- Extra Strong Pipe (Schedule 80) A.S.A. B36.10 SCHEDULE NOS. AND NOMINAL WALL THICKNESS DESIGNATIONS NOMINAL PIPE SIZE (IN.) OUTSIDE DIAMETER (IN.) WALL THICKNESS (IN.) INSIDE DIAMETER (IN.) 8 2 3 4 1 11 4 11 2 2 2 1 2 3 3 1 2 4 5 6 8 10 12 14 OD 16 OD 18 OD 20 OD 24 OD 10 12 14 OD 16 OD 18 OD 20 OD 24 OD .675 .840 1.050 1.315 1.660 1.900 2.375 2.875 3.500 4.000 4.500 5.563 6.625 8.625 10.750 12.750 14.000 16.000 18.000 20.000 24.000 10.750 12.750 14.000 16.000 18.000 20.000 24.000 .126 .147 .154 .179 .191 .200 .218 .276 .300 .318 .337 .375 .432 .500 .500 .500 .500 .500 .500 .500 .500 .593 .687 .750 .842 .937 1.031 1.218 .423 .546 .742 .957 1.278 1.500 1.939 2.323 2.900 3.364 3.826 4.813 5.761 7.625 9.750 11.750 13.000 15.000 17.000 19.000 23.000 9.564 11.376 12.500 14.314 16.126 17.938 21.564 3 1 EXTRA STRONG PIPE and SCHEDULE 80 PIPE (through 8") EXTRA STRONG PIPE (10" through 24" OD) SCHEDULE 80 PIPE (10" through 24" OD) Table 13 -- Pipe Covering Weights Thickness (Intended as Guide Only) and Weight of Calcium Silicate Covering NOMINAL PIPE SIZE 1 11 4 11 2 2 2 1 2 3 3 1 2 4 5 6 8 F-120 260 THICK. (IN.) 360 THICK. (IN.) 440 THICK. (IN.) 525 THICK. (IN.) 600 THICK. (IN.) 700 THICK. (IN.) 800 THICK. (IN.) 1 1 1 1 1 1 1 1 1 11 2 11 2 1 1 1 1 1 1 1 1 1 11 2 11 2 1 1 1 1 1 1 11 2 11 2 11 2 11 2 11 2 1 1 1 11 2 11 2 11 2 11 2 11 2 11 2 11 2 11 2 11 2 11 2 11 2 11 2 11 2 11 2 2 2 2 2 2 11 2 11 2 11 2 2 2 2 2 2 2 2 2 11 2 2 2 2 21 2 21 2 21 2 21 2 21 2 21 2 21 2 tnb07_gm102_F_120_121 1/18/08 9:44 AM Page F-121 Metal Framing Engineering Data Design Applications * General Storage Racks * Pallet Racks * Barrel Racks * Bulk Furniture Racks Column height, equal shelf spacing * Cable Racks * Display Racks * Special Purpose Racks * For Uniform Loads on Horizontal Members, See Table 3 Typical general storage rack for use with plywood or other decking Table 14 -- Column Loading for Rack Construction COLUMN HEIGHT 6' 7' 8' 9' 10' CAT. NO. A-1200 A-1202 B-1400 B-1402 A-1200 A-1202 B-1400 B-1402 A-1200 A-1202 B-1400 B-1402 A-1200 A-1202 B-1400 B-1402 A-1200 A-1202 B-1400 B-1402 2 3 4 2,237 4,170 800 1,930 2,150 4,000 650 1,800 2,000 3,900 580 1,650 1,950 3,800 1,925 3,580 820 1,700 1,850 3,525 790 1,650 1,820 3,475 750 1,610 1,780 3,400 600 1,500 1,700 3,300 550 1,480 1,650 3,100 790 1,500 1,630 3,000 760 1,450 1,600 3,000 730 1,450 1,575 3,020 665 1,430 1,500 3,000 650 1,400 1,500 1,870 3,600 1,450 ALLOWABLE LOAD IN LBS. PER UPRIGHT NUMBER OF SHELVES PER UPRIGHT 5 6 7 1,437 2,730 700 1,300 1,425 2,700 685 1,300 1,400 2,700 660 1,300 1,400 2,675 600 1,275 1,300 2,650 625 1,250 1,290 2,450 630 1,190 1,280 2,430 615 1,180 1,250 2,400 610 1,160 1,250 2,400 580 1,160 1,200 2,350 580 1,140 -- -- -- -- 1,150 2,200 550 750 1,150 2,185 540 940 1,130 2,180 540 1,000 1,100 2,000 535 1,040 8 9 10 -- -- -- -- -- -- -- -- 1,050 2,000 510 970 1,030 1,975 500 900 1,000 1,975 490 960 -- -- -- -- -- -- -- -- -- -- -- -- 950 1,800 475 800 900 1,800 450 885 -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- -- 800 1,650 425 825 Metal Framing, Pipe Hangers and Accessories * Bar Stock Racks A-3 F-121 tnb07_gm102_F_122_123 1/18/08 9:44 AM Page F-122 Metal Framing Engineering Data Metal Framing, Pipe Hangers and Accessories Federal Specifications (WW-H-171)/ Manufacturers Society Specifications (MSS SP69) C-710 Adj. Steel Clevis Sizes 3 4" through 20" IPS Federal Type 1 SP69 Type 1 C-727 / CT-727 Adj. Swivel Ring Hanger Sizes 1 2" through 8" IPS 1 2" through 4" tube Federal Type 10 SP69 Type 10 A C-726 Steel Double Bolt Pipe Clamp Sizes 11 2" through 24" IPS Federal Type 3 SP69 Type 3 M-718 / MT-718 MI Split Pipe Ring w/wo turnbuckle adj. Sizes 1 2" through 8" IPS 1 2" through 4" tube Federal Type 11 SP69 Type 12 C-725 Steel Pipe Clamp Sizes 11 2" through 24" IPS Federal Type 4 SP69 Type 4 CF-710 Adj. Steel Band Hanger Sizes 1 2" through 8" IPS 3 4" through 4" tube Federal Type 7 CL-710 Light-Duty Clevis Hanger Sizes 1 2" through 4" Federal Type 12 F-112 Forged Steel Turnbuckle Sizes 3 8" through 11 2" rod Federal Type 13 SP69 Type 13 452 Steel Concrete Insert Federal Type 19 SP69 Type 18 C-755 T / C-757 T Center I-Beam Clamp Federal Type 21 SP69 Type 21 C-780 Welded attachment as shown or inverted less bolt Federal Type 22 SP69 Type 22 M-777 Junior Top Beam C-Clamp 3 Sizes 8" through 1 2" rod SP69 Type 18 C-711 "J" Pipe Hanger 1 Sizes 2" through 8" pipe SP69 Type 5 C-720 / CT-720 Extension Pipe or Riser Clamp Sizes 3 4" through 20" IPS 1 2" through 6" tube Federal Type 8 SP69 Type 8 F-111 Forged Steel Clevis Sizes 3 8" through 11 2" rod Federal Type 14 SP69 Type 13 Rod Size "B" Max. Dia. F-122 M-117 MI Socket only for S Split Ring Hanger Sizes 3 8" through 7 8" Rod Federal Type 16 SP69 Type 16 E-120-A Forged Steel Weldless Eye Nut Sizes 3 8" through 11 2" rod Federal Type 17 SP69 Type 17 M-775-L / C-775-L MI or Steel C-Clamp Sizes 3 8" through 7 8" Federal Type 23 SP69 Type 23 H-115 U-Bolt Sizes 2" through 24" IPS Federal Type 24 SP69 Type 24 1 M-778 Top Beam C-Clamp 3 Sizes 8" through 3 4" rod SP69 Type 19 tnb07_gm102_F_122_123 1/18/08 9:44 AM Page F-123 Metal Framing Engineering Data Federal Specifications (WW-H-171)/ Manufacturers Society Specifications (MSS SP69) M-732-H I-Beam w/Eye Nut Federal w/o links Type 28 Federal w/links Type 29 SP69 Type 28 M-732 / M-732 Ext I-Beam Clamp w/Swing Nut Sizes 3 8" through 7 8" Rod Federal Type 30 SP69 Type 30 C-736 Light Welded Steel Bracket Federal Type 32 SP69 Type 31 C-739-M Medium Welded Steel Bracket Federal Type 33 SP69 Type 32 C-739-H Heavy Welded Steel Bracket Max. Load 3,000 lbs. Federal Type 34 SP69 Type 33 M-750 Side Beam Bracket 3 Sizes 8" through 7 8" Rod Federal Type 35 SP69 Type 34 C-785-A Pipe Stanchion Saddle Sizes 4" through 36" IPS Federal Type 38 SP69 Type 37 C-786 Adj. Pipe Saddle Support Sizes 21 2" through 36" IPS Federal Type 39 SP69 Type 38 C-789 Steel Pipe Covering Protection Saddle Sizes up to and including 10" IPS Federal Type 40A SP69 Type 39 C-789 Steel Pipe Covering Protection Saddle Sizes 12" IPS and larger Federal Type 40B SP69 Type 39 C-790 Insulation Protection Shield for Vapor sealed pipe lines and insulated copper tubing Sizes 3 4" through 12" IPS Federal Type 41 SP69 Type 40 RC-729A Single Pipe Roll Sizes 1" through 24" IPS Federal Type 42 SP69 Type 41 C-729 Adj. Roller Hanger Sizes 1" through 20" IPS Federal Type 44 SP69 Type 43 S-730-C Pipe Roll Complete Federal Type 45 SP69 Type 44 S-730-D Adj. Pipe Roll & Base Federal Type 47 SP69 Type 46 Metal Framing, Pipe Hangers and Accessories C-704-A Offset J-Hook 1 Sizes 2" through 3" IPS Federal Type 27 C-769 Top I-Beam Clamp Sizes 3 4" through 7 8" Rod Federal Type 53 SP69 Type 25 A-3 F-123 tnb07_gm102_F_124 1/18/08 9:43 AM Page F-124 Takes a Bite Out of Your Installation Time! Cobra(R) One-Piece Cable and Pipe Clamp Accepts... Multi-driver combination bolt head accepts a wrench, screwdriver or nut driver. NEW! * One-piece, heavy-duty construction, ready to install right out of the box, no need to break apart and re-assemble, no screws or bolts to drop * Installs quickly and securely using one hand * Universal bolt head accepts a range of tools * Eliminates the guesswork from clamp selection -- one catalog number attaches equal trade sizes of EMT and rigid conduit * Parallel hook design keeps conduits and cable square with strut * Reconfigure wiring without complete disassembly * Remove cables easily without disturbing neighboring clamps Simple Product Selection, Solid Installation Attaches... Attaches a full range of EMT, rigid conduit and cable to strut channels. Remove... Remove cable or pipes easily without disturbing neighboring clamps. F-124 * Clear markings on each clamp identify the catalog number, min./max. outer cable diameters, EMT/Rigid trade sizes, CSA and UL stamps * One size clamp works on equal trade sizes for both EMT and rigid conduit * Works with all depths of strut -- 1316" to 314" * Two hooks on the same side make the clamp easy to install and keep conduits and cable square with strut * Rugged stirrup and wide saddle design holds securely with no damage to conduit or cable * Suggested design load is 200 lbs. (12" to 2"); 350 lbs. (212" to 4"). Safety factor 4:1 (safety factor = ratio of ultimate load to the design load) * Heavy-duty 516" hex bolt with multi-driver head (Robertson square, Phillips cross-recess and slot) provides full range of installation options. Virtually any tool will work! * Bright zinc finish -- clamps are electrogalvanized after fabrication for additional durability See page F-40 for ordering Information.