TOSHIBA ULN2003,04AP/AFW TOSHIBA BIPOLAR DIGITAL INTEGRATED CIRCUIT SILICON MONOLITHIC ULN2003AP, ULN2003AFW, ULN2004AP, ULN2004AFW 7CH DARLINGTON SINK DRIVER The ULN2003AP/ AFW Series are high-voltage, high-current ULN2003AP darlington drivers comprised of seven NPN darlington ULN2004AP pairs. All units feature integral clamp diodes for switching inductive loads. Applications include relay, hammer, lamp and display (LED) drivers. DIP16-P-300-2.54A FEATURES ULN2003AFW ULN2004AFW @ Output current (single output) 500mA MAX. @ High sustaining voltage output 50V MIN. (ULN2003AP / AFW Series) @ Output clamp diodes @ Inputs compatible with various types of logic S$OL16-P-150-1.27A @ Package Type-AP : DIP-16pin Weight @ Package Type-AFW : SOL-16pin DIP16-P-300-2.54A : 1.11g (Typ.) SOL16-P-150-1.27A : 0.15g (Typ.) PIN CONNECTION (TOP VIEW) O01 O02 O03 O4 O5 O68 OF COMMON TYPE I ESISTOS DESIGNATION fel [sl fal [el [el fl fol fe] ULN2003AP / AFW 2.7kQ___| TTL, 5V CMOS ! ULN2004AP / AFW 10.5kQ __|6~15V PMOS, CMOS ) LE Lele] e] # LL} 2] Bl! ty le} Z BI 1 12 13 14 I5 16 \7 GND 961001EBA1 @ TOSHIBA is continually working to improve the quality and the reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to observe standards of safety, and to avoid situations in which a malfunction or failure of a TOSHIBA product could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent products specifications. Also, please keep in mind the precautions and conditions set forth in the TOSHIBA Semiconductor Reliability Handbook. @ The products described in this document are subject to foreign exchange and foreign trade control laws. @ The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA CORPORATION for any infringements of intellectual property or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any intellectual property or other rights of TOSHIBA CORPORATION or others. @ The information contained herein is subject to change without notice. 1998-04-24 1/11TOSHIBA ULN2003,04AP/AFW SCHEMATICS (EACH DRIVER) ULN2003AP / AFW ULN2004AP / AFW COMMON COMMON or*0 r+ INPUT be-O INPUT b ge toa Oe too too HK K | | OUTPUT a K -K 1 OUTPUT < 720g * * < 7 2kOL *F | I | yt bee +_ @) bee ee +_ > GND GND (Note) The input and output parasitic diodes cannot be used as clamp diodes. MAXIMUM RATINGS (Ta = 25C) CHARACTERISTIC SYMBOL RATING UNIT Output Sustaining Voltage VCE (SUS) -0.5~50 V Output Current IOUT 500 mA/ch Input Voltage VIN -0.5~30 Vv Clamp Diode Reverse Voltage Ve 50 Vv Clamp Diode Forward Current | Ir 500 mA oo, AP 1.47 Power Dissipation AFW PD 0.54/0.625 (Note) Ww Operating Temperature Topr -40~85 C Storage Temperature Tstg -55~150 C (Note) On glass epoxy PCB (30x 30x 1.6mm Cu 50%) 1998-04-24 2/11TOSHIBA ULN2003,04AP/AFW RECOMMENDED OPERATING CONDITIONS (Ta= - 40~85C) CHARACTERISTIC SYMBOL CONDITION MIN. | TYP. | MAX.] UNIT Output Sustaining Voltage VCE (SUS) Oo; 50 V Fea PRusmet of 7 Circuits uty = 6 _ I mA/ch Output Current AEW OUT Ta =85C Duty = 10% 0 _ 233 Tj = 120C Duty = 50% Oo; 70 Input Voltage VIN Oo; 24 Vv Input Voltage ULN2003A Vv lout = 400mA 2.38 | 24 V (Output On) ULN2004A | 'N(ON) |he- = 800 62 | 24 Input Voltage ULN2003A V o; 0.7 V (Output Off) ULN2004A | IN (OFF) o| 1.0 Clamp Diode Reverse Voltage VR 50 Vv Clamp Diode Forward Current IF 350; mA Power Dissipation AP P Ta = 85C 0.76 Ww P AFW D (Note) Ta = 85C | [0.325 (Note) On glass epoxy PCB (30x30x1.6mm Cu 50%) 1998-04-24 3/11TOSHIBA ULN2003,04AP/AFW ELECTRICAL CHARACTERISTICS (Ta = 25C unless otherwise noted) TEST CHARACTERISTIC SYMBOL | CIR- TEST CONDITION MIN. | TYP. | MAX. | UNIT CUIT Vcp=50V, Ta=25C 50 Output Leakage Current ICEX 1 Vcp=50V, Ta=85C = = 700 LA I = 350mA, li =5004A | 1.3 1.6 Collector-Emitter Saturation OUT IN L Voltage VcE (sat) | 2 |louT=200mA, IIN=3504A | 1.1 1.3 V lQUuT = 100mA, li =250KA | 0.9 1.1 DC Current Transfer Ratio hee 2 |VcE=2V, lout =350mA 1000}; Input Current ULN2003A 3 VIN =2.4V, IgyT = 350mA _ 0.4 0.7 mA (Output On) ULN2004A | 'N (ON) ViIN=9-5V, Ioyt=350mA | | 0.8 | 1.2 Input Current (Output Off) IIN(OFF) | 4 |louT=500/A, Ta = 85C 50| 65 LA ULN2003A loUT=350mMA| _ 2.6 Input Voltage Vv 5 VcE=2V louT=200mA| 2.0 V (Output On) ULN2004A IN (ON) hre=800 [igyp=350mA| | | 47 lout=200mA| | | 44 Vr =50V, Ta=25C [ 50 Clamp Diode Reverse Current IR 6 Vp =50V, Taze5sc 700 uA Clamp Diode Forward Voltage Ve 7 |Ip=350mA 2.0 Vv Input Capacitance CIN 15 pF Vi =50V, Rp = 1250, Turn-On Delay ton 8 Ch 15pF L 0.1 = = HS Turn-Off Delay torr 8 Co lepr RL= 1250) | 02] 1998-04-24 4/11TOSHIBA ULN2003,04AP/AFW TEST CIRCUIT 1. ICEX 2. VCE (sat): hFE 3. IIN (ON) OPEN OPEN OPEN |i tin lout lIN (ON) OPEN VcE = = OPEN VIN | VcE- VCE (sat) VIN A I her = OUT Fes 4. lIN (OFF) 5. VIN (ON) 6. IR OPEN OPEN lIN (OFF) | lOUT | lout ac VR OPEN VIN (ON) VCE 4 4 OPEN 7. VE Ve +] OPEN - OPEN 1998-04-24 5/11TOSHIBA ULN2003,04AP/AFW 8. ton, tOFF INPUT OPEN VOUT pe RL PULSE I I GENERATOR 1 1 OUTPUT (Note 2)! | CL =15pF (Note 1) 00 wee eee | (Note 3) t tf _ 90% \ VIH INPUT E sox 50% N 10% 10% | Xe 0 50s ton torr Vou QUTPUT 50% 50% VoL (Note 1) Pulse width 50s, duty cycle 10% Output impedance 500, t-=5ns, tf= 10ns (Note 2) See below INPUT CONDITION TYPE NUMBER R1 VIH ULN2003AP / AFW 0 3V ULN2004AP / AFW 0 8V (Note 3) Cy, includes probe and jig capacitance. PRECAUTIONS for USING Utmost care is necessary in the design of the output line, COMMON and GND line since IC may be destroyed due to short-circuit between outputs, air contamination fault, or fault by improper grounding. 1998-04-24 6/11TOSHIBA ULN2003,04AP/AFW lout (mA) OUTPUT CURRENT lout (mA) OUTPUT CURRENT lin (mA) INPUT CURRENT lout - DUTY CYCLE ULN200XAFW Ta=25C On PCB n-ch ACTIVE 0 20 40 60 80 DUTY CYCLE (%) louT - DUTY CYCLE 100 ULN200XAP Ta=25C FREE AIR n-ch ACTIVE 0 20 40 60 80 100 DUTY CYCLE (%) IN - VIN 12 ULN2003 rl =100mA Ta=25C Our 200 y 300 8 fo fL L 7 LZ 0 10 20 30 INPUT VOLTAGE Vin (V) 40 lout (mA) OUTPUT CURRENT lout (mA) OUTPUT CURRENT lin (mA) INPUT CURRENT lout - DUTY CYCLE ULN200XAFW Ta =85C On PCB n-ch ACTIVE 20 40 60 80 100 DUTY CYCLE (%) louT - DUTY CYCLE ULN200XAP Ta=85C FREE AIR n-ch ACTIVE 20 40 60 80 100 DUTY CYCLE (%) IN - VIN ULN2003 Max. L | a a Typ. a LZ 27 I = | 7 | a Ute Min. ~~ [7 - ot) 3 4 5 INPUT VOLTAGE Vin (V) 1998-04-24 7/11TOSHIBA ULN2003,04AP/AFW lin (mA) INPUT CURRENT lout (mA) OUTPUT CURRENT lout (mA) OUTPUT CURRENT IN - VIN 3 ULN2004 Ta =25C + 200 1 300 2 T louT = 4 | JA y 0 0 10 20 30 40 INPUT VOLTAGE Vin (V) louT IIN Recommended Maximum Rating Ta=75C 0 100 200 300 400 500 600 INPUT CURRENT liq (eA) loUuT VCE (sat) 600 lIN = 500 uA - [if 25 Mi. 0 Z / 0.4 08 1.2 COLLECTOR-EMITTER SATURATION VOLTAGE VcE (sat) (VY) lin (mA) INPUT CURRENT lout (mA) OUTPUT CURRENT \r (mA) CLAMP DIODE FORWARD CURRENT 600 400 200 IN - VIN ULN2004 Max. Lae 4 _ ne Typ. | ae | wa TT OT epee _ Min 7 9 11 INPUT VOLTAGE Vin (V) loUuT VCE (sat) 25C Max.7 / / / 7 7. 0 0.5 1.0 1.5 2.0 COLLECTOR-EMITTER SATURATION VOLTAGE VCE (sat) IF - VE Ta=25C 0.4 0.8 1.2 1.6 2.0 CLAMP DIODE FORWARD VOLTAGE Vp (V) 1998-04-24 8/11TOSHIBA ULN2003,04AP/AFW hFE - loUT 2000 hFE - IOUT 1 10000 ULN2004 Voce =2.0V ULN2003 5000 3000| Vce=2.0V 1000 wy ooQo Qo Oo 100 gi Qo wl Oo w Oo w 3 DC CURRENT TRANSFER RATIO hee DC CURRENT TRANSFER RATIO hee =) = Oo wl uw 10 100 1000 10000 = 10 100 1000 10000 OUTPUT CURRENT logy 7 (mA) OUTPUT CURRENT lguT (mA) Pp - Ta @ Type-AP free air @ Type-AFW on glass epoxy PCB 30x 30x 1.6mm Cu 50% @ Type-AFW free air POWER DISSIPATION Pp (W) 0 25 50 75 100 125 150 AMBIENT TEMPERATURE Ta (C) 1998-04-24 9/11TOSHIBA ULN2003,04AP/AFW OUTLINE DRAWING DIP16-P-300-2.54A 18 16 9 Cy) 4 od a ) 6.420.2 U a A es 8 19.75MAX 19.2540.2 x Q.95+0.1 0.735TYP . . ns > 54 |[osio1psrsemy A) Weight : 1.119 (Typ.) 1998-04-24 10/11TOSHIBA ULN2003,04AP/AFW OUTLINE DRAWING SOL16-P-150-1.27A Ee = {=e} = fe. LAr <LI on A= |. Sc] oo +t +i Weight : 0.15g (Typ.) 1998-04-24 11/11