10CTQ150S/10CTQ150-1 Vishay High Power Products Schottky Rectifier, 2 x 5 A FEATURES 10CTQ150-1 10CTQ150S * 175 C TJ operation * Center tap configuration * Low forward voltage drop * High frequency operation Base common cathode 2 Base common cathode 2 * High purity, high temperature epoxy encapsulation for enhanced mechanical strength and moisture resistance * Guard ring for enhanced ruggedness and long term reliability * Designed and qualified for industrial level Anode 2 Common Anode 1 cathode 3 Anode 2 Common Anode 1 cathode 3 D2PAK DESCRIPTION This center tap Schottky rectifier has been optimized for low reverse leakage at high temperature. The proprietary barrier technology allows for reliable operation up to 175 C junction temperature. Typical applications are in switching power supplies, converters, freewheeling diodes, and reverse battery protection. TO-262 PRODUCT SUMMARY IF(AV) 2x5A VR 150 V MAJOR RATINGS AND CHARACTERISTICS SYMBOL IF(AV) CHARACTERISTICS VALUES Rectangular waveform VRRM UNITS 10 A 150 V IFSM tp = 5 s sine 620 A VF 5 Apk, TJ = 125 C (per leg) 0.73 V TJ Range - 55 to 175 C 10CTQ150S 10CTQ150-1 UNITS 150 V VOLTAGE RATINGS PARAMETER SYMBOL Maximum DC reverse voltage VR Maximum working peak reverse voltage VRWM ABSOLUTE MAXIMUM RATINGS PARAMETER Maximum average forward current See fig. 5 SYMBOL TEST CONDITIONS per leg VALUES UNITS 5 IF(AV) 50 % duty cycle at TC = 155 C, rectangular waveform per device A 10 Following any rated load condition and with rated VRRM applied Maximum peak one cycle non-repetitive surge current per leg See fig. 7 IFSM Non-repetitive avalanche energy per leg EAS TJ = 25 C, IAS = 0.30 A, L = 150 mH 6.75 mJ Repetitive avalanche current per leg IAR Current decaying linearly to zero in 1 s Frequency limited by TJ maximum VA = 1.5 x VR typical 0.30 A Document Number: 93942 Revision: 06-Oct-08 5 s sine or 3 s rect. pulse 10 ms sine or 6 ms rect. pulse For technical questions, contact: diodes-tech@vishay.com 620 A 115 www.vishay.com 1 10CTQ150S/10CTQ150-1 Vishay High Power Products Schottky Rectifier, 2 x 5 A ELECTRICAL SPECIFICATIONS PARAMETER SYMBOL TEST CONDITIONS 5A Maximum forward voltage drop per leg See fig. 1 VFM (1) 5A IRM (1) Threshold voltage VF(TO) Forward slope resistance rt Maximum junction capacitance per leg CT Typical series inductance per leg LS Maximum voltage rate of change dV/dt 1.10 0.86 0.05 VR = Rated VR TJ = 125 C V 0.73 TJ = 125 C TJ = 25 C UNITS 0.93 TJ = 25 C 10 A 10 A Maximum reverse leakage current per leg See fig. 2 VALUES mA 7 TJ = TJ maximum VR = 5 VDC (test signal range 100 kHz to 1 MHz) 25 C Measured lead to lead 5 mm from package body Rated VR 0.468 V 28 m 200 pF 8.0 nH 10 000 V/s Note (1) Pulse width < 300 s, duty cycle < 2 % THERMAL - MECHANICAL SPECIFICATIONS PARAMETER SYMBOL Maximum junction and storage temperature range TEST CONDITIONS TJ, TStg Maximum thermal resistance, junction to case per leg C DC operation RthCS Mounting surface, smooth and greased C/W 0.50 2 g 0.07 oz. minimum 6 (5) kgf * cm maximum 12 (10) (lbf * in) Approximate weight www.vishay.com 2 - 55 to 175 1.75 Typical thermal resistance, case to heatsink (only for TO-220) Marking device UNITS 3.50 RthJC Maximum thermal resistance, junction to case per package Mounting torque VALUES D2PAK 10CTQ150S Case style TO-262 10CTQ150-1 Case style For technical questions, contact: diodes-tech@vishay.com Document Number: 93942 Revision: 06-Oct-08 10CTQ150S/10CTQ150-1 Schottky Rectifier, 2 x 5 A 100 IR - Reverse Current (mA) IF - Instantaneous Forward Current (A) 100 Vishay High Power Products TJ = 175 C TJ = 125 C TJ = 25 C 10 1 TJ = 175 C 10 TJ = 150 C 1 TJ = 125 C 0.1 TJ = 100 C 0.01 TJ = 75 C TJ = 50 C 0.001 TJ = 25 C 0.0001 0 0.5 1.0 1.5 2.0 2.5 3.0 0 25 50 75 100 125 150 VFM - Forward Voltage Drop (V) VR - Reverse Voltage (V) Fig. 1 - Maximum Forward Voltage Drop Characteristics (Per Leg) Fig. 2 - Typical Values of Reverse Current vs. Reverse Voltage (Per Leg) CT - Junction Capacitance (pF) 1000 100 TJ = 25 C 10 0 20 40 60 80 100 120 140 160 VR - Reverse Voltage (V) ZthJC - Thermal Impedance (C/W) Fig. 3 - Typical Junction Capacitance vs. Reverse Voltage (Per Leg) 10 1 0.1 D = 0.75 D = 0.50 D = 0.33 D = 0.25 D = 0.20 PDM t1 t2 0.01 Notes: 1. Duty factor D = t1/t2 2. Peak TJ = PDM x ZthJC + TC Single pulse (thermal resistance) 0.001 0.00001 0.0001 0.001 0.01 0.1 1 10 100 t1 - Rectangular Pulse Duration (s) Fig. 4 - Maximum Thermal Impedance ZthJC Characteristics (Per Leg) Document Number: 93942 Revision: 06-Oct-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 3 10CTQ150S/10CTQ150-1 Vishay High Power Products Schottky Rectifier, 2 x 5 A 5 170 Average Power Loss (W) Allowable Case Temperature (C) 180 DC 160 150 Square wave (D = 0.50) 80 % rated VR applied 140 130 D = 0.20 D = 0.25 D = 0.33 D = 0.50 D = 0.75 4 3 RMS limit 2 DC 1 See note (1) 0 120 0 2 4 6 0 8 1 2 3 4 5 6 7 8 IF(AV) - Average Forward Current (A) Fig. 6 - Forward Power Loss Characteristics (Per Leg) IFSM - Non-Repetitive Surge Current (A) IF(AV) - Average Forward Current (A) Fig. 5 - Maximum Allowable Case Temperature vs. Average Forward Current (Per Leg) 1000 At any rated load condition and with rated VRRM applied following surge 100 10 100 1000 10 000 tp - Square Wave Pulse Duration (s) Fig. 7 - Maximum Non-Repetitive Surge Current (Per Leg) L D.U.T. IRFP460 Rg = 25 Current monitor High-speed switch Freewheel diode + Vd = 25 V 40HFL40S02 Fig. 8 - Unclamped Inductive Test Circuit Note Formula used: TC = TJ - (Pd + PdREV) x RthJC; Pd = Forward power loss = IF(AV) x VFM at (IF(AV)/D) (see fig. 6); PdREV = Inverse power loss = VR1 x IR (1 - D); IR at VR1 = 10 V (1) www.vishay.com 4 For technical questions, contact: diodes-tech@vishay.com Document Number: 93942 Revision: 06-Oct-08 10CTQ150S/10CTQ150-1 Schottky Rectifier, 2 x 5 A Vishay High Power Products ORDERING INFORMATION TABLE Device code 10 C T Q 150 S TRL - 1 2 3 4 5 6 7 8 1 - Current rating (10 A) 2 - Circuit configuration 3 - T = TO-220 4 - Schottky "Q" series 5 - Voltage rating (150 = 150 V) 6 - C = Common cathode S = D2PAK -1 = TO-262 7 - None = Tube (50 pieces) TRL = Tape and reel (left oriented - for D2PAK only) TRR = Tape and reel (right oriented - for D2PAK only) 8 - None = Standard production PbF = Lead (Pb)-free LINKS TO RELATED DOCUMENTS Dimensions http://www.vishay.com/doc?95014 Part marking information http://www.vishay.com/doc?95008 Packaging information http://www.vishay.com/doc?95032 Document Number: 93942 Revision: 06-Oct-08 For technical questions, contact: diodes-tech@vishay.com www.vishay.com 5 Legal Disclaimer Notice Vishay Disclaimer All product specifications and data are subject to change without notice. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. Vishay disclaims any and all liability arising out of the use or application of any product described herein or of any information provided herein to the maximum extent permitted by law. The product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein, which apply to these products. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. The products shown herein are not designed for use in medical, life-saving, or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay for any damages arising or resulting from such use or sale. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners. Document Number: 91000 Revision: 18-Jul-08 www.vishay.com 1