TOPLED(R) Enhanced optical Power LED (HOP2000) Lead (Pb) Free Product - RoHS Compliant LA T68B, LY T68B Nicht fur Neuentwicklungen / Not for New Designs Besondere Merkmale Features * Gehausetyp: weies P-LCC-2 Gehause, farbloser klarer Verguss * Besonderheit des Bauteils: Kontrasterhohung durch schwarze Oberflache (RGB-Displays); mehr Licht durch erhohten optischen Wirkungsgrad; extrem breite Abstrahlcharakteristik * Wellenlange: 617 nm (amber), 587 nm (yellow) * Abstrahlwinkel: Lambertscher Strahler (120) * Technologie: InGaAlP * optischer Wirkungsgrad: 24 lm/W * Gruppierungsparameter: Lichtstarke, Wellenlange * Verarbeitungsmethode: fur alle SMT-Bestucktechniken geeignet * Lotmethode: IR Reflow Loten und Wellenloten (TTW) * Vorbehandlung: nach JEDEC Level 2 * Gurtung: 8 mm Gurt mit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm * ESD-Festigkeit: ESD-sicher bis 2 kV nach JESD22-A114-D * package: white P-LCC-2 package, colorless clear resin * feature of the device: higher contrast by a black suface (RGB-Displays); more light due to higher optical efficiency; extremely wide viewing angle * wavelength: 617 nm (amber), 587 nm (yellow) * viewing angle: Lambertian Emitter (120) * technology: InGaAlP * optical efficiency: 24 lm/W * grouping parameter: luminous intensity, wavelength * assembly methods: suitable for all SMT assembly methods * soldering methods: IR reflow soldering and TTW soldering * preconditioning: acc. to JEDEC Level 2 * taping: 8 mm tape with 2000/reel, o180 mm or 8000/reel, o330 mm * ESD-withstand voltage: up to 2 kV acc. to JESD22-A114-D Anwendungen Applications * Ampelanwendung * Informationsanzeigen im Innen- und Auenbereich (z. B. Verkehrsbereich) * Innen- und Auenbeleuchtung im Automobilbereich (z.B. Instrumentenbeleuchtung, Bremslichter, Blinker und seitl. Begrenzungsleuchten) * Hinterleuchtung (LCD, Schalter, Tasten, Displays, Werbebeleuchtung) * Ersatz von Kleinst-Gluhlampen * Markierungsbeleuchtung (z.B. Stufen, Fluchtwege, u.a.) * Signal- und Symbolleuchten * Vollfarbdisplay im Innen- und Auenbereich in Kombination mit LB T68C und LT T68C * traffic lights * indoor and outdoor information panels (e.g. displays for traffic) * interior and exterior automotive lighting (e.g. dashboard backlighting, brake lights, turn signal lamps and sidemarkers) * backlighting (LCD, switches, keys, displays, illuminated advertising) * substitution of micro incandescent lamps * marker lights (e.g. steps, exit ways, etc.) * signal and symbol luminaire * indoor and outdoor full color displays in combination with LB T68C and LT T68C 2009-10-30 1 LA T68B, LY T68B Bestellinformation Ordering Information Typ Emissionsfarbe Lichtstarke1) Seite 15 Lichtstrom2) Seite 15 Bestellnummer Type Color of Emission Luminous Intensity1) page 15 Luminous Flux2) page 15 IF = 30 mA IV (mcd) IF = 30 mA V (mlm) Ordering Code LA T68B-T2V1-24 amber 355 ... 900 1900 (typ.) Q65110A2157 LY T68B-T2V1-26 yellow 355 ... 900 1900 (typ.) Q65110A2158 Anm.: Die oben genannten Typbezeichnungen umfassen die bestellbaren Selektionen. Diese bestehen aus wenigen Helligkeitsgruppen (siehe Seite 5 fur nahere Informationen). Es wird nur eine einzige Helligkeitsgruppe pro Gurt geliefert. Z.B.: LA T68B-T2V1-24 bedeutet, dass auf dem Gurt nur eine der Helligkeitsgruppen T2, U1, U2 oder V1 enthalten ist. Um die Liefersicherheit zu gewahrleisten, konnen einzelne Helligkeitsgruppen nicht bestellt werden. Gleiches gilt fur die Farben, bei denen Wellenlangengruppen gemessen und gruppiert werden. Pro Gurt wird nur eine Wellenlangengruppe geliefert. Z.B.: LA T68B-T2V1-24 bedeutet, dass auf dem Gurt nur eine der Wellenlangengruppen -2, -3, oder -4 enthalten ist (siehe Seite 5 fur nahere Information). Um die Liefersicherheit zu gewahrleisten, konnen einzelne Wellenlangengruppen nicht bestellt werden. Note: The above Type Numbers represent the order groups which include only a few brightness groups (see page 5 for explanation). Only one group will be shipped on each reel (there will be no mixing of two groups on each reel). E.g. LA T68B-T2V1-24 means that only one group T2, U1, U2 or V1 will be shippable for any one reel. In order to ensure availability, single brightness groups will not be orderable. In a similar manner for colors where wavelength groups are measured and binned, single wavelength groups will be shipped on any one reel. E.g. LA T68B-T2V1-24 means that only 1 wavelength group -2, -3, or -4 will be shippable (see page 5 for explanation). In order to ensure availability, single wavelength groups will not be orderable. 2009-10-30 2 LA T68B, LY T68B Grenzwerte Maximum Ratings Bezeichnung Parameter Symbol Symbol Werte Values Einheit Unit Betriebstemperatur Operating temperature range Top - 40 ... + 100 C Lagertemperatur Storage temperature range Tstg - 40 ... + 100 C Sperrschichttemperatur Junction temperature Tj + 125 C Durchlassstrom Forward current (TA=25C) IF 50 mA Stostrom Surge current t 10 s, D = 0.1, TA=25C IFM 100 mA Sperrspannung3) Seite 15 Reverse voltage3) page 15 (TA=25C) VR 12 V Leistungsaufnahme Power consumption (TA=25C) Ptot 130 mW Rth JA 400 K/W Rth JS 180 K/W Warmewiderstand Thermal resistance Sperrschicht/Umgebung4) Seite 15 Junction/ambient4) page 15 Sperrschicht/Lotpad Junction/soldering point 2009-10-30 3 LA T68B, LY T68B Kennwerte Characteristics (TA = 25 C) Bezeichnung Parameter Wellenlange des emittierten Lichtes Wavelength at peak emission IF = 30 mA Symbol Symbol (typ.) Dominantwellenlange5) Seite 15 Dominant wavelength5) page 15 IF = 30 mA Werte Values Einheit Unit LA LY peak 624 594 nm dom 617* -5/+7 587* nm -7/+8 Spektrale Bandbreite bei 50 % Irel max Spectral bandwidth at 50 % Irel max IF = 30 mA (typ.) 18 15 nm Abstrahlwinkel bei 50 % IV (Vollwinkel) Viewing angle at 50 % IV (typ.) 2 120 120 Grad deg. Durchlassspannung6) Seite 15 Forward voltage6) page 15 IF = 30 mA (min.) (typ.) (max.) VF VF VF 1.8 2.1 2.4 1.8 2.1 2.4 V V V Sperrstrom Reverse current VR = 12 V (typ.) (max.) IR IR 0.01 10 0.01 10 A A Temperaturkoeffizient von peak Temperature coefficient of peak IF = 30 mA; -10C T 100C (typ.) TCpeak 0.15 0.13 nm/K Temperaturkoeffizient von dom Temperature coefficient of dom IF = 30 mA; -10C T 100C (typ.) TCdom 0.07 0.10 nm/K Temperaturkoeffizient von VF Temperature coefficient of VF IF = 30 mA; -10C T 100C (typ.) TCV - 3.7 - 3.7 mV/K Optischer Wirkungsgrad Optical efficiency IF = 30 mA (typ.) opt 24 24 lm/W * Einzelgruppen siehe Seite 5 Individual groups on page 5 2009-10-30 4 LA T68B, LY T68B Wellenlangengruppen (Dominantwellenlange)5) Seite 15 Wavelength Groups (Dominant Wavelength)5) page 15 Gruppe Group amber yellow Einheit Unit min. max. min. max. 2 612 616 580 583 nm 3 616 620 583 586 nm 4 620 624 586 589 nm 5 589 592 nm 6 592 595 nm Helligkeits-Gruppierungsschema Brightness Groups Helligkeitsgruppe Brightness Group T2 U1 U2 V1 Lichtstarke1) Seite 15 Luminous Intensity1) page 15 IV (mcd) 355 ... 450 ... 560 ... 710 ... 450 560 710 900 Lichtstrom2) Seite 15 Luminous Flux2) page 15 V (mlm) 1200 (typ.) 1500 (typ.) 1900 (typ.) 2400 (typ.) Anm.: Die Standardlieferform von Serientypen beinhaltet eine Familiengruppe. Diese besteht aus 4 Helligkeitsgruppen. Einzelne Helligkeitsgruppen sind nicht bestellbar. Note: The standard shipping format for serial types includes a family group of 4 individual brightness groups. Individual brightness groups cannot be ordered. Gruppenbezeichnung auf Etikett Group Name on Label Beispiel: U1-3 Example: U1-3 Helligkeitsgruppe Brightness Group Wellenlange Wavelength U1 3 Anm.: In einer Verpackungseinheit / Gurt ist immer nur eine Gruppe fur jede Selektion enthalten. Note: No packing unit / tape ever contains more than one group for each selection. 2009-10-30 5 LA T68B, LY T68B Relative spektrale Emission2) Seite 15 Relative Spectral Emission2) page 15 V() = spektrale Augenempfindlichkeit / Standard eye response curve Irel = f (); TA = 25 C; IF = 30 mA OHL00013 100 % Irel 80 V 60 yellow amber 40 20 0 400 450 500 550 600 650 nm 700 Abstrahlcharakteristik2) Seite 15 Radiation Characteristic2) page 15 Irel = f (); TA = 25 C 40 30 20 10 0 50 OHL01660 1.0 0.8 0.6 60 0.4 70 0.2 80 0 90 100 1.0 2009-10-30 0.8 0.6 0.4 0 20 6 40 60 80 100 120 LA T68B, LY T68B Durchlassstrom2) Seite 15 Forward Current2) page 15 IF = f (VF); TA = 25 C Relative Lichtstarke2) 7) Seite 15 Relative Luminous Intensity2) 7) page 15 IV/IV(30 mA) = f (IF); TA = 25 C OHL00590 10 2 OHL00874 10 1 IV IV (30 mA) mA IF 10 1 10 0 10 0 10 -1 10 -1 10 -2 1.3 1.5 1.7 1.9 2.1 10 -2 0 10 2.3 V 2.5 10 1 mA 10 2 IF VF Relative Lichtstarke2) Seite 15 Relative Luminous Intensity2) page 15 IV/IV(25 C) = f (Tj); IF = 30 mA OHL00740 2.0 IV IV (25 C) 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 -40 -20 0 20 40 60 C 100 Tj 2009-10-30 7 LA T68B, LY T68B Maximal zulassiger Durchlassstrom Max. Permissible Forward Current I F = f ( T) IF OHL00176 60 mA S 50 40 A 30 20 10 0 A temp. ambient S temp. solder point 0 20 40 60 80 C 100 Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 25 C OHL00193 0.12 IF Zulassige Impulsbelastbarkeit IF = f (tp) Permissible Pulse Handling Capability Duty cycle D = parameter, TA = 85 C IF A A 0.10 0.10 0.08 0.06 OHL01318 0.14 0.005 0.05 0.5 0.08 0.06 0.04 tP D= T tP IF T D= 0.005 0.01 0.02 0.05 0.1 0.2 0.5 1 0.04 0.02 0.02 0 10-5 10-4 10-3 10-2 10-1 100 101 s 102 0 -5 10 10-4 10-3 10-2 10-1 100 101 s 102 tp tp 2009-10-30 8 LA T68B, LY T68B Mazeichnung8) Seite 15 Package Outlines8) page 15 2.1 (0.083) 3.0 (0.118) 2.6 (0.102) 2.3 (0.091) 1.7 (0.067) 0.1 (0.004) (typ.) 0.9 (0.035) 0.7 (0.028) 3.4 (0.134) 3.0 (0.118) (2.4) (0.095) 3.7 (0.146) 3.3 (0.130) 41 2.1 (0.083) A Cathode marking 0.5 (0.020) 1.1 (0.043) C 0.18 (0.007) 0.12 (0.005) 0.6 (0.024) 0.4 (0.016) GPLY6724 Kathodenkennung: Cathode mark: Gewicht / Approx. weight: abgeschragte Ecke bevelled edge 35 mg Gurtung / Polaritat und Lage8) Seite 15 Verpackungseinheit 2000/Rolle, o180 mm oder 8000/Rolle, o330 mm Method of Taping / Polarity and Orientation8) page 15 Packing unit 2000/reel, o180 mm or 8000/reel, o330 mm 2.9 (0.114) 4 (0.157) 2009-10-30 9 8 (0.315) Cathode/Collector Marking 1.75 (0.069) 2 (0.079) 3.5 (0.138) 4 (0.157) 3.6 (0.142) 1.5 (0.059) OHAY2271 LA T68B, LY T68B Empfohlenes Lotpaddesign8) 9) Seite 15 Recommended Solder Pad8) 9) page 15 IR-Reflow Loten IR Reflow Soldering 2.6 (0.102) 4.5 (0.177) 1.5 (0.059) 1.5 (0.059) 4.5 (0.177) 2.6 (0.102) Padgeometrie fur verbesserte Warmeableitung Lotstopplack Solder resist Paddesign for improved heat dissipation Cu-Flache > 16 mm 2 Cu-area > 16 mm 2 OHLPY970 (R) Empfohlenes Lotpaddesign verwendbar fur TOPLED und Power TOPLED(R) IR Reflow Loten8) Seite 15 Recommended Solder Pad useable for TOPLED(R) and Power TOPLED(R) IR Reflow Soldering8) page 15 Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Padgeometrie fur verbesserte Warmeableitung 3.3 (0.130) Paddesign for improved heat dissipation 3.3 (0.130) Anode 2.3 (0.091) 11.1 (0.437) 1.5 (0.059) 1.1 (0.043) 3.7 (0.146) 0.8 (0.031) 0.7 (0.028) Kathode/ Cathode Flache darf elektrisch nicht beschaltet werden. Do not use this area for electrical contact. Lotstoplack Solder resist 2009-10-30 10 Cu Flache / <_ 16 mm 2 per pad Cu-area OHLPY440 LA T68B, LY T68B Lotbedingungen Soldering Conditions Vorbehandlung nach JEDEC Level 2 Preconditioning acc. to JEDEC Level 2 IR-Reflow Lotprofil fur bleifreies Loten IR Reflow Soldering Profile for lead free soldering (nach J-STD-020B) (acc. to J-STD-020B) OHLA0687 300 Maximum Solder Profile Recommended Solder Profile Minimum Solder Profile C T 255 C 240 C 250 C 260 C +0 -5 C 245 C 5 C C 235 C +5 -0 C 217 C 10 s min 200 30 s max Ramp Down 6 K/s (max) 150 100 s max 120 s max 100 Ramp Up 3 K/s (max) 50 25 C 0 0 50 100 150 200 250 s 300 t Wellenloten (TTW) TTW Soldering (nach CECC 00802) (acc. to CECC 00802) OHLY0598 300 C T 10 s 250 Normalkurve standard curve 235 C ... 260 C Grenzkurven limit curves 2. Welle 2. wave 200 1. Welle 1. wave 150 ca 200 K/s 2 K/s 5 K/s 100 C ... 130 C 100 2 K/s 50 Zwangskuhlung forced cooling 0 0 50 100 150 200 t 2009-10-30 11 s 250 LA T68B, LY T68B Barcode-Produkt-Etikett (BPL) Barcode-Product-Label (BPL) OSRAM Opto Lx xxxx Bin1: Bin Information Color 1 Bin2: Product Name Bin3: pl e Semiconductors RoHS Compliant ML Temp ST 2 260 C RT (6P) BATCH NO: Batch Number Bar Code Additional TEXT (9D) D/C: Date Code Sa m (1T) LOT NO: Lot Number R077 Bar Code (X) PROD NO: Product Code (Q)QTY: Product Quantity per Reel DEMY PACKVAR: Packing Type (G) GROUP: X - X - X Bar Code Forward Voltage Group Wavelength Group Brightness Group OHA12043 Gurtverpackung Tape and Reel W1 D0 P0 A N F W E 13.0 0.25 P2 Label P1 Direction of unreeling Direction of unreeling W2 Gurtvorlauf: 400 mm 400 mm Leader: Gurtende: Trailer: 160 mm 160 mm OHAY0324 Tape dimensions in mm (inch) W 8 + 0.3 - 0.1 P0 P1 P2 D0 E F 4 0.1 4 0.1 2 0.05 1.5 + 0.1 1.75 0.1 3.5 0.05 (0.157 0.004) (0.157 0.004) (0.079 0.002) (0.059 + 0.004) (0.069 0.004) (0.138 0.002) Reel dimensions in mm (inch) A W Nmin W1 W2 max 180 (7) 8 (0.315) 60 (2.362) 8.4 2 (0.331 + 0.079) 14.4 (0.567) 330 (13) 8 (0.315) 60 (2.362) 8.4 2 (0.331 + 0.079) 14.4 (0.567) 2009-10-30 12 LA T68B, LY T68B Trockenverpackung und Materialien Dry Packing Process and Materials Moisture-sensitive label or print L VE el LE see . lab e H) nk, bla cod (R If y bar . dit RH mi % hu e /60 ve ed ag C ati rar ck rel 30 RS _ < inf pa % ins VE of to ak ITI TO 90 urs nta d ). < ns (pe or urs d co NSUC Ho de , cte itio urs g SEND Ho an bje ing co C 72 nd Ho urs 5 ba E CO te 48 C su ss e Ho co is UR ce 24 6 da e y MI 40 be tim h C e ThISTSE l pro < tor tim or ). 23 tim e at t wilntC or l wit fac MO Flo tim TO s at or ca at re. Flo d tha ale el or nth OP nti Flo uiv du if: rea es l 4 5 Flo lab mo ide ce eq low g, l ve vic is be or de 24 tin en l 5a6 pro ve Le de , e te co , g: ve l un wh Le ke r se da ure ba ed low ba Le ve mo % ba e al d ure Le ist en ref e e 10 tim ure se for ist ale op se for > Mo , se 3 ist ure is or . , is ha se Mo nk be ist nk rd g -03 Mo in Flo RH g, r-p bla Mo ba TD po If bla hin % kin Ca life s (if ar t. s wit 10 ba tor J-S thi, va p. elf Ye ar ek _ < e icat me , C 1 urs Ye er tem ted Sh at ed low uir > 1 WeHo un Aft Indno uir DE 1. e 4 8 ref dy red reqy is 2. bo e Mo /JE tim dit2b 16 req : e a) Sto es tim or mi IPC ed or g is tim e vic b) or e Hu Flo en tim or De 2a kin nc te Flo a) op or 3. b) baere Flo da e l 1 2 Flo If al ref tim ve l 4. se d l 2a3 ve Le g an ve l Le Ba te ure Le ve ure Le ist Da ure ist Mo ist ure Mo ist Mo Mo Barcode label O S R A M N TIO U A C Humidity indicator Barcode label Please check the HIC immidiately after bag opening. Discard if circles overrun. Avoid metal contact. Do not eat. Comparator check dot WET If wet, examine units, if necessary bake units 15% If wet, examine units, if necessary bake units 10% 5% If wet, parts still adequately dry. change desiccant Humidity Indicator MIL-I-8835 AM Desiccant OSR OHA00539 Anm.: Feuchteempfindliche Produkte sind verpackt in einem Trockenbeutel zusammen mit einem Trockenmittel und einer Feuchteindikatorkarte Bezuglich Trockenverpackung finden Sie weitere Hinweise im Internet und in unserem Short Form Catalog im Kapitel "Gurtung und Verpackung" unter dem Punkt "Trockenverpackung". Hier sind Normenbezuge, unter anderem ein Auszug der JEDEC-Norm, enthalten. Note: Moisture-senisitve product is packed in a dry bag containing desiccant and a humidity card. Regarding dry pack you will find further information in the internet and in the Short Form Catalog in chapter "Tape and Reel" under the topic "Dry Pack". Here you will also find the normative references like JEDEC. Kartonverpackung und Materialien Transportation Packing and Materials Barcode label Y M DE 18 R -1 +Q -1 P P: OU GR 44 01 C: D/ D) (9 20 A : TY on M du O p ct to or s : 34 )Q R ic S NO O 12 H em H S TC BA 3G P) : 12 (6 : NO -1 Q + -1 P P: OU GR ) (G 44 01 00 20 : TY (Q )Q : NO M RA OS (X ) PR OD 5 14 2 110 0 Packing Sealing label 2009-10-30 NO T LO T) (1 OD PR ) M DE 18 R u L lt S iT Y O T67 P L 6 M Y E Bi D Bi n1 Bi n2 : Pn3 : Q- 1: 1- 20 M 20 2 L Te 2a 22 m 3 24 0 p ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Muster to C: p rs o D/ O ct D) u M (9 d A n o : R 34 ic S NO O 12 TC (1 T) LO T NO (6 P) : 12 BA 3G S 8 H H em 2199 5 14 2 110 0 (X at 2100 8 2199 2100 ) L 00 E el MO TO OP (Q V LE see . lab e H) nk, bla cod (R If y bar . dit RH mi % hu e /60 ive d C re ag lat ra ck re 30 _ < inf pa % k s of to 90 ea ur s d ). < ns (p or ur s d Ho de , cteg itio ur s Ho an bje co C 72 sin nd Ho ur 5 te 48 C su es e Ho co 24 6 da e y 40 be oc tim C e th < tor ll pr tim or ). 23 wi nt tim e or l wi fac t C Flo tim s at or e. ca at Flo tha ale el or ur nth nti Flo uiv if: read es ed l 4 5 Flo lab mo ide eq low g, l oc ve vic is be or de 24 tin en l 5a6 pr ve Le de e te co , w, g: ve l un wh e Le ke r se da ve % ur e ba ed flo Le mo ba e ba al d ur e Le ist en re e 10 e tim ur e se for ist ale op se for > Mo , se ist ur is or . , is ha 33 se Mo nk be ist nk rd g -0 Mo in n Flo r-p RH g, bla Mo ba TD po If blathi % kin Ca life s (if ar t. p. wi va tor 10 ba J-S thi elf Ye ar ks s _ < me 1 Ye ee ur d, C ire icat Sh ter w, tem ted at > 1 W Ho un Af flody qu Indno ire DE 1. e 4 8 re ed re y is qu JE 2. bo e Mo or tim 16 re C/ : e es dit2b a) St tim or mi ed or g is IP tim e vic b) or Hu Flo en tim or De 2a kin ce te Flo a) op or 3. b) ba en Flo da e fer l 1 2 Flo If al re tim ve l 4. se d l 2a3 ve Le g an ve l e Le Ba te ur e Le ve ur e Le ist Da ur e ist Mo ist ur Mo ist Mo Mo N s IVE RS ainIT TO ntNSUC TIO U g coSEND CO Ais baRE TU MI CThIS SE (G M u L lt S iT Y O T67 P L 6 Muster E Bi D Bi n1 Bi n2 : Pn3 : Q- 1: 1- 20 M 20 2 L Te 2a 22 m 3 24 0 p ST Ad 26 0 C R 0 C R0 dit ion C R PA 77 al RT CK TE VA XT R: Barcode label 13 OHA02044 LA T68B, LY T68B Revision History: 2009-10-30 Previous Version: 2007-08-08 Page Subjects (major changes since last revision) Date of change all Not for new designs 2009-10-30 Attention please! The information describes the type of component and shall not be considered as assured characteristics. Terms of delivery and rights to change design reserved. Due to technical requirements components may contain dangerous substances. For information on the types in question please contact our Sales Organization. If printed or downloaded, please find the latest version in the Internet. Packing Please use the recycling operators known to you. We can also help you - get in touch with your nearest sales office. By agreement we will take packing material back, if it is sorted. You must bear the costs of transport. For packing material that is returned to us unsorted or which we are not obliged to accept, we shall have to invoice you for any costs incurred. Components used in life-support devices or systems must be expressly authorized for such purpose! Critical components10) page 15 may only be used in life-support devices or systems11) page 15 with the express written approval of OSRAM OS. 2009-10-30 14 LA T68B, LY T68B Funoten: 1) Helligkeitswerte werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 11% ermittelt. 2) Wegen der besonderen Prozessbedingungen bei der Herstellung von LED konnen typische oder abgeleitete technische Parameter nur aufgrund statistischer Werte wiedergegeben werden. Diese stimmen nicht notwendigerweise mit den Werten jedes einzelnen Produktes uberein, dessen Werte sich von typischen und abgeleiteten Werten oder typischen Kennlinien unterscheiden konnen. Falls erforderlich, z.B. aufgrund technischer Verbesserungen, werden diese typischen Werte ohne weitere Ankundigung geandert. 3) Die LED kann kurzzeitig in Sperrichtung betrieben werden. 4) Montage auf PC-Board FR 4 (Padgroe 16 mm 2) 5) Wellenlangen werden mit einer Stromeinpragedauer von 25 ms und einer Genauigkeit von 1 nm ermittelt. 6) Spannungswerte werden mit einer Stromeinpragedauer von 1 ms und einer Genauigkeit von 0,1 V ermittelt. 7) Im gestrichelten Bereich der Kennlinien muss mit erhohten Helligkeitsunterschieden zwischen Leuchtdioden innerhalb einer Verpackungseinheit gerechnet werden. Dimmverhaltnis im Gleichstrom-Betrieb max. 5:1 8) Mae werden wie folgt angegeben: mm (inch) 9) Gehause halt TTW-Lothitze aus nach CECC 00802 Remarks: 1) Brightness groups are tested at a current pulse duration of 25 ms and a tolerance of 11%. 10) 10) 11) 2) 3) 4) 5) 6) In the range where the line of the graph is broken, you must expect higher brightness differences between single LEDs within one packing unit. Dimming range for direct current mode max. 5:1 8) Dimensions are specified as follows: mm (inch). Package able to withstand TTW-soldering heat acc. to CECC 00802 A critical component is a component used in a life-support device or system whose failure can reasonably be expected to cause the failure of that life-support device or system, or to affect its safety or the effectiveness of that device or system. 11) Published by OSRAM Opto Semiconductors GmbH Leibnizstrae 4, D-93055 Regensburg www.osram-os.com (c) All Rights Reserved. 2009-10-30 7) 9) Ein kritisches Bauteil ist ein Bauteil, das in lebenserhaltenden Apparaten oder Systemen eingesetzt wird und dessen Defekt voraussichtlich zu einer Fehlfunktion dieses lebenserhaltenden Apparates oder Systems fuhren wird oder die Sicherheit oder Effektivitat dieses Apparates oder Systems beeintrachtigt. Lebenserhaltende Apparate oder Systeme sind fur (a) die Implantierung in den menschlichen Korper oder (b) fur die Lebenserhaltung bestimmt. Falls sie versagen, kann davon ausgegangen werden, dass die Gesundheit und das Leben des Patienten in Gefahr ist. 15 Due to the special conditions of the manufacturing processes of LED, the typical data or calculated correlations of technical parameters can only reflect statistical figures. These do not necessarily correspond to the actual parameters of each single product, which could differ from the typical data and calculated correlations or the typical characteristic line. If requested, e.g. because of technical improvements, these typ. data will be changed without any further notice. Driving the LED in reverse direction is suitable for short term application. Mounted on PC board FR 4 (pad size 16 mm 2) Wavelengths are tested at a current pulse duration of 25 ms and a tolerance of 1 nm. Forward voltages are tested at a current pulse duration of 1 ms and a tolerance of 0.1 V. Life support devices or systems are intended (a) to be implanted in the human body, or (b) to support and/or maintain and sustain human life. If they fail, it is reasonable to assume that the health and the life of the user may be endangered.