Previous Page | Return to Index | Next Page

TINI Q-G® MINIATURE CONNECTORS

U.S. Patent No. 4,361,375, 4,316,647, 4,921,431

Series TA(*)F, TA(*)FB, TA(*)FL and TA(*)FLB -

Straight female cord plug

Series TA(*)M, TA(*)MB, TA(*)ML and TA(*)MLB -

Straight male cord plug

Series TBA(* *) - Audio Adapters

Series TRA(*)M - PC Mount Male Receptacles

MICROPHONES

Ideal for live performances, recording sessions, and audio pickups. Available in black

chrome finish for use on camera or where reflected light is a problem. Disconnecting

plugs from lavaliere or clip-on mikes is quick and easy...press the release button and pull

the plug free. Either shielded or unshielded cables can be used up to 0.115 inches (2.92

mm) in diameter (standard). Cable shield may either be connected to a pin/contact through

circuit or may be connected to the cable clamp strain relief. This alternate connection

permits using the metal housings of plugs to completely shield internal connections and

TY(*)FPC X X X

TRA(*)M X X

1 P.C. board termination is recommended alternate method

Tini Q-G ® plugs and receptacles have the quality and versatility of functions and features

for the most demanding compact connections in industrial, R and D and production

instrumentation of all kinds. The 4, 5, and 6-pin/contact versions are especially suited to

multi-circuit connections.

DESIGN FEATURES

Series TA(*)M = .3 ounce (8.5 g).

strength. Contacts and terminals are precision formed and plated for intimate contact and

low resistance connections. Terminal numbers are molded on rear of male insert and on

face of female insert for easy identification (except 6-pin male insert). Inserts can be

supplied for OEM installation in microphones and instrumentation for optimum

connecting reliability. For cord plugs, inserts can also be supplied for replacements.

and transfer of shielding connection between housing, combined with simple, easy

fingertip release.

male plugs and receptacles cannot be "scooped", bent or damaged by accidental

mismating with mating connector.

COLOR ESCUTCHEONS - Attractive color escutcheons, Series TYEF, are

recommended for use with Series TY(*)F and TY(*)FPC receptacles (when rear mounted)

for attractive panel trim, as well as color coding one or more connectors. Colors are: red,

black, gray, green, blue, white and yellow.

On special order where production quantities warrant, Switchcraft can supply assembled

Series TY(*)FPC:

Front--.312 inch (7.9 mm) maximum

Rear--.093 inch (2.3 mm) maximum

SPECIFICATIONS: (all Tini QG, except 6 pin)

Current Rating (Carry Only): 5 A, 125 V AC (4 A, 125 V AC on 5 circuit) based on 30°

Insulation Resistance: 510,000 megohms minimum @ 500 V DC (initial); 10,000

Insertion/Withdrawal Forces (after life): 6.1 lb./2.77 kg after life, insertion; 5.6 lb/2.54

kg, withdrawal.

Solderability Standard: Meets EIA RS-186-9E.

Thermal Shock: Meets MIL-STD-202, method 107D.

Salt Spray: Meets MlL-STD-202, method 101.

Die-cast zinc, nickel-plated.

Pin and Socket Contacts: Copper alloy, silver-plated.

Flex Relief: Molded black thermoplastic elastomer.

Latch Button: Molded black thermoplastic.

Release Lever and Mounting Washer: Steel, nickel-plated.

Contact Resistance: .010 ohm maximum after life.

Current Rating (Carry only): 1.5A, 125 VAC, based

on 30° maximum

Insulation Resistance: 510,000 M(omega) minimum

@ 500 VDC (initial).

Dielectric Strength: 250 V rms.

Insertion/Withdrawal Forces (after life): --13 pound

Socket Contacts: Copper alloy, silver-plated.

Pin Contacts: Copper alloy, electrotinned.

Flex Relief and Latch Button: Molded thermoplastic.

Ground Terminal: Copper alloy, electrotinned.

Inserts and Insulating Spacer: Molded high strength

thermoplastic, UL 94 V-0.

Latch (Female): Copper alloy, nickel-plated.

Mounting Nut: Copper alloy, nickel-plated.

FRONT

PANEL

MOUNT

USING

NUT

(MALE

RIGHT