8 PIN DIP HIGH SPEED SPLIT DARLINGTON PHOTOCOUPLER 6N138 6N139 Features: * High isolation voltage between input and output (Viso=5000 Vrms ) * Guaranteed performance from 0C to 70C * Pb free and RoHS compliant. Description The 6N138 and 6N139 devices each consists of an infrared emitting diodes, optically coupled to a high gain split Darlington photo detectors. They are packaged in an 8-pin DIP package and available in wide-lead spacing and SMD options. Applications Schematic * Digital logic ground isolation * RS-232C line receiver * High common mode noise line receiver * Microprocessor bus isolation * Current loop receiver 1 8 2 7 3 6 4 5 6N138/6N139 Pin Configuration 1. No Connection 2. Anode 3. Cathode 4. No Connection 5. Gnd 6. Vout 7. VB 8. Vcc Isocom Components Ltd. Document No DC93135 1 Rev. 1 http://www.isocom.com January 16, 2009 8 PIN DIP HIGH SPEED SPLIT DARLINGTON PHOTOCOUPLER 6N138 6N139 Absolute Maximum Ratings (Ta=25C unless otherwise specified) Parameter Input Symbol Rating Unit Forward current IF 20 mA Peak forward current (50% duty, 1ms P.W) IFP 40 mA Peak transient current (1s P.W, 300pps) IFtrans 1 A Reverse voltage VR 5 V Power dissipation PIN 35 mW Power dissipation PO 100 mW Output current IO 60 mA VER 0.5 V -0.5 to 7 V -0.5 to 18 V -0.5 to 7 V -0.5 to 18 V Emitter-Base Reverse Voltage Output 6N138 Output voltage 6N139 6N138 Supply voltage 6N139 VO VCC Isolation voltage *1 VISO 5000 V rms Operating temperature TOPR -55 ~ +85 C Storage temperature TSTG -55 ~ +125 C Soldering temperature *2 TSOL 260 C Notes *1 AC for 1 minute, R.H.= 40 ~ 60% R.H. In this test, pins 1, 2, 3, 4 are shorted together, and pins 5, 6, 7, 8 are shorted together. *2 For 10 seconds. Isocom Components Ltd. Document No DC93135 2 Rev. 1 http://www.isocom.com January 16, 2009 8 PIN DIP HIGH SPEED SPLIT DARLINGTON PHOTOCOUPLER 6N138 6N139 Electrical Characteristics (Ta=0 to 70C unless specified otherwise) Input Parameter Symbol Min. Typ.* Max. Unit Forward voltage VF - 1.3 1.7 V IF = 1.6mA Reverse Voltage VR 5.0 - - V IR = 10A, TA=25C VF/TA - -1.8 - mV/C Symbol Min. Typ.* Max. Unit - - 100 - - 250 Temperature coefficient of forward voltage Condition IF =1.6mA Output Parameter Logic High Output Current 6N139 A IOH 6N138 Condition IF=0mA, VO=VCC=18V Logic Low Supply Current 6N138 6N139 ICCL - - 1.5 mA IF=1.6mA, VO=Open, VCC=18V Logic High Supply Current 6N138 6N139 ICCH - - 10 A IF=0mA, VO=Open, VCC=18V Transfer Characteristics (Ta=0 to 70C unless specified otherwise, Vcc=4.5V) Parameter Current Transfer Ratio Symbol 6N139 CTR 6N138 Logic Low Output Voltage Min. Typ.* Max. 400 - - 500 - - 300 - - - - 0.4 - - 0.4 - - 0.4 - - 0.4 - - 0.4 Unit IF = 0.5mA, VO = 0.4V, VCC=4.5V % 6N138 IF = 1.6mA, VO = 0.4V, VCC=4.5V IF = 0.5mA, IO = 2mA, VCC=4.5V 6N139 VOL Condition V IF = 1.6mA, IO = 8mA, VCC=4.5V IF = 5mA, IO = 15mA, VCC=4.5V IF = 12mA, IO = 24mA, VCC=4.5V IF = 1.6mA, IO = 4.8mA, VCC=4.5V * Typical values at Ta = 25C Isocom Components Ltd. Document No DC93135 3 Rev. 1 http://www.isocom.com January 16, 2009 8 PIN DIP HIGH SPEED SPLIT DARLINGTON PHOTOCOUPLER 6N138 6N139 Switching Characteristics (Ta=0 to 70C unless specified otherwise, Vcc=5V) Parameter Propagation Delay Time to Logic Low Symbol 6N139 TPHL 6N138 6N139 Propagation Delay Time to Logic High TPLH Min. Typ.* Max. Unit - - 25 IF = 0.5mA , RL=4.7k, TA=25C - - 30 IF = 0.5mA , RL=4.7k - - 1 - - 2 IF = 12mA , RL=270 - - 10 IF = 1.6mA , RL=2.2k, TA=25C - - 15 IF = 1.6mA , RL=2.2k - - 60 IF = 0.5mA , RL=4.7k, TA=25C - - 90 IF = 0.5mA , RL=4.7k - - 7 IF = 12mA , RL=270, TA=25C - - 10 - - 35 IF = 1.6mA , RL=2.2k, TA=25C - - 50 IF = 1.6mA , RL=2.2k s s 6N138 Condition IF = 12mA , RL=270, TA=25C IF = 12mA , RL=270 Common Mode Transient Immunity at Logic High CMH 1,000 - - V/s IF = 0mA , VCM=10Vp-p, RL=2.2K, TA=25C Common Mode Transient Immunity at Logic Low CML 1,000 - - V/s IF = 1.6mA , VCM=10Vp-p, RL=2.2K, TA=25C * Typical values at Ta = 25C Isocom Components Ltd. Document No DC93135 4 Rev. 1 http://www.isocom.com January 16, 2009 8 PIN DIP HIGH SPEED SPLIT DARLINGTON PHOTOCOUPLER 6N138 6N139 Typical Performance Curves Isocom Components Ltd. Document No DC93135 5 Rev. 1 http://www.isocom.com January 16, 2009 8 PIN DIP HIGH SPEED SPLIT DARLINGTON PHOTOCOUPLER Isocom Components Ltd. Document No DC93135 6 Rev. 1 6N138 6N139 http://www.isocom.com January 16, 2009 8 PIN DIP HIGH SPEED SPLIT DARLINGTON PHOTOCOUPLER Isocom Components Ltd. Document No DC93135 7 Rev. 1 6N138 6N139 http://www.isocom.com January 16, 2009 8 PIN DIP HIGH SPEED SPLIT DARLINGTON PHOTOCOUPLER 6N138 6N139 90% Pulse Generator Tr=5ns, Zo=50 90% VCM=10V +5V 0V IF 10% RL 10% tr tf VF IF Monitor Vo 0.1uF 5V VO 0.1uF Switch at A: IF=0mA Rin VO Switch at A: IF=16mA VOL Fig. 13 Switching Time Test Circuit IF A +5V RL VF IF Vo B VFF 0.1uF 5V VO 1.5V VOL VCM tPHL tPLH Fig. 14 Common Mode Transient Immunity Test Circuit Isocom Components Ltd. Document No DC93135 8 Rev. 1 http://www.isocom.com January 16, 2009 8 PIN DIP HIGH SPEED SPLIT DARLINGTON PHOTOCOUPLER 6N138 6N139 Order Information Part Number 6N13XY Note X Y = Part No. (X = 8 or 9) = Lead form option (G SM T+R or none) Option Description Packing quantity None Standard DIP-8 45 units per tube G Wide lead bend (0.4 inch spacing) 45 units per tube SM Surface mount lead form 45 units per tube SM T+R Surface mount lead form + tape & reel 1000 units per reel Isocom Components Ltd. Document No DC93135 9 Rev. 1 http://www.isocom.com January 16, 2009 8 PIN DIP HIGH SPEED SPLIT DARLINGTON PHOTOCOUPLER 6N138 6N139 Package Drawing (Dimensions in mm) Standard DIP Type Option G Type Isocom Components Ltd. Document No DC93135 10 Rev. 1 http://www.isocom.com January 16, 2009 8 PIN DIP HIGH SPEED SPLIT DARLINGTON PHOTOCOUPLER 6N138 6N139 Option SM Type Isocom Components Ltd. Document No DC93135 11 Rev. 1 http://www.isocom.com January 16, 2009 8 PIN DIP HIGH SPEED SPLIT DARLINGTON PHOTOCOUPLER 6N138 6N139 Recommended pad layout for surface mount leadform Device Marking 6N138 IYWW Notes 6N138 Y WW I denotes Device Number denotes 1 digit Year code denotes 2 digit Week code denotes Isocom Isocom Components Ltd. Document No DC93135 12 Rev. 1 http://www.isocom.com January 16, 2009 8 PIN DIP HIGH SPEED SPLIT DARLINGTON PHOTOCOUPLER 6N138 6N139 Tape & Reel Packing Specifications Option TA Direction of feed from reel Tape dimensions Dimension No. A B Do D1 E F Dimension(mm) 10.40.1 10.00.1 1.50.1 1.50.1 1.750.1 7.50.1 Dimension No. Po P1 P2 t W K Dimension(mm) 4.00.1 12.00.1 2.00.1 0.40.1 16.0+0.3/ -0.1 4.50.1 Isocom Components Ltd. Document No DC93135 13 Rev. 1 http://www.isocom.com January 16, 2009 8 PIN DIP HIGH SPEED SPLIT DARLINGTON PHOTOCOUPLER 6N138 6N139 Solder Reflow Temperature Profile 260 C (peak,10 Sec Max) >255 C ( 30s Max ) 217 1-3 C/Sec Max 200 60 - 140 Sec 150C 70 - 170 Sec 1-3 C/Sec Max TIME (S) Isocom Components Ltd. Document No DC93135 14 Rev. 1 http://www.isocom.com January 16, 2009 8 PIN DIP HIGH SPEED SPLIT DARLINGTON PHOTOCOUPLER 6N138 6N139 DISCLAIMER 1. Above specification may be changed without notice. Isocom will reserve authority on material change for above specification. 2. When using this product, please observe the absolute maximum ratings and the instructions for using outlined in these specification sheets. Isocom assumes no responsibility for any damage resulting from use of the product which does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. These specification sheets include materials protected under copyright of Isocom. Please don't reproduce or cause anyone to reproduce them without Isocom's consent. Isocom Components Ltd. Document No DC93135 15 Rev. 1 http://www.isocom.com January 16, 2009