Part Number: www.SunLED.com XZDMOK10A2 SURFACE MOUNT DISPLAY Features ,0.4INCH DIGIT HEIGHT. ,LOW CURRENT OPERATION. ,EXCELLENT CHARACTER APPEARANCE. ,I.C. COMPATIBLE. ,MECHANICALLY RUGGED. ,GRAY FACE,WHITE SEGMENT. ,PACKAGE:500PCS/REEL. ,RoHS COMPLIANT. Notes: 1. All dimensions are in millimeters (inches). 2. Tolerance is 0.25(0.01") unless otherwise noted. Absolute Maximum Ratings (TA=25C)) MOK (InGaAlP) Unit Reverse Voltage VR 5 V Forward Current IF 30 mA Forward Current (peak) 1/10 Duty Cycle 0.1ms Pulse Width iFS 195 mA Power Dissipation PT 75 Operating Temperature TA -40 ~ +85 Tstg -40 ~ +85 Storage Temperature Part Number XZDMOK10A2 Emitting Color Orange Published Date : MAY 18, 2005 Emitting Material InGaAlP Operating Characteristics (TA=25C)) mW C Luminous Intensity (IF=10mA) ucd min. typ. 12000 41190 Drawing No : XDSA3083 MOK (InGaAlP) Unit Forward Voltage (typ.) (IF=10mA) VF 2.0 V Forward Voltage (max.) (IF=10mA) VF 2.5 V Reverse Current (VR=5V) IR 10 uA Wavelength of Peak Emission (IF=10mA) P 610 nm Wavelength of Dominant Emission (IF=10mA) D 601 nm Spectral Line Full Width At Half-Maximum (IF=10mA) 29 nm Capacitance (VF=0V, f=1MHz) C 15 pF Wavelength nm P Description 610 Common Anode. Rt. Hand Decimal V4 Checked : Shin Chi P.1/3 Part Number: www.SunLED.com XZDMOK10A2 SURFACE MOUNT DISPLAY MOK Published Date : MAY 18, 2005 Drawing No : XDSA3083 V4 Checked : Shin Chi P.2/3 Part Number: www.SunLED.com XZDMOK10A2 SURFACE MOUNT DISPLAY Recommended Soldering Pattern (Units : mm;Tolerance: 0.15) Tape Specification (Units : mm) Remarks: If special sorting is required (e.g. binning based on forward voltage, luminous intensity, or wavelength), the typical accuracy of the sorting process is as follows: 1. Wavelength: +/-1nm 2. Luminous Intensity: +/-15% 3. Forward Voltage: +/-0.1V Note: Accuracy may depend on the sorting parameters. Published Date : MAY 18, 2005 Drawing No : XDSA3083 V4 Checked : Shin Chi P.3/3