PAA132 Dual Single-Pole, Normally Open OptoMOS(R) Relays Parameter Blocking Voltage Load Current Input Control Current Max RON Rating 60 600 2 1 Description Units VP mA mA The PAA132 Solid State Relay has two independent, optically coupled, single-pole, normally open (1-Form-A), relays in a single 8-pin package. Clare's patented OptoMOS architecture makes available the optically coupled technology necessary to activate the output's efficient MOSFET switches while providing a 3750Vrms input-to-output isolation barrier. Control of the isolated output is accomplished by means of a highly effective GaAlAs infrared LED at the input. Features * * * * * * * * * * Low Input Control Current: 2mA 3750Vrms Input/Output Isolation Small 8-Pin Package TTL/CMOS Compatible No Moving Parts High Reliability Arc-Free With No Snubbing Circuits No EMI/RFI Generation Machine Insertable, Wave Solderable Surface Mount Tape & Reel Version Available By incorporating two independent, single-pole relays into a single 8-pin package, the PAA132 saves board space by providing a more compact design solution than two discrete single-pole relays in a variety of applications. Approvals Applications * Instrumentation * Multiplexers * Data Acquisition * Electronic Switching * I/O Subsystems * Meters (Watt-Hour, Water, Gas) * Medical Equipment--Patient/Equipment Isolation * Security * Aerospace * Industrial Controls * Automotive * UL Recognized Component: File E76270 * CSA Certified Component: Certificate 1175739 * EN/IEC 60950-1 Certified Component: TUV Certificate B 09 07 49410 004 Ordering Information Part # PAA132 PAA132S PAA132STR Description 8-Pin DIP (50/Tube) 8-Pin Surface Mount (50/Tube) 8-Pin Surface Mount (1,000/Reel) Pin Configuration AC/DC Configuration + Control - Switch #1 - Control - Switch #1 + Control - Switch #2 - Control - Switch #2 1 8 2 7 3 6 4 5 Load - Switch #1 Load - Switch #1 Load - Switch #2 Load - Switch #2 Switching Characteristics of Normally Open Devices Form-A IF 90% 10% ILOAD ton Pb RoHS 2002/95/EC DS-PAA132-R03 toff e3 www.clare.com 1 PAA132 Absolute Maximum Ratings @ 25C Parameter Blocking Voltage Reverse Input Voltage Input Control Current Peak (10ms) Input Power Dissipation 1 Total Power Dissipation 2 Isolation Voltage, Input to Output Operational Temperature Storage Temperature 1 Derate linearly 1.33 mW / C 2 Derate linearly 6.67 mW / C Ratings 60 5 50 1 150 800 3750 -40 to +85 -40 to +125 Units VP V mA A mW mW Vrms C C Absolute Maximum Ratings are stress ratings. Stresses in excess of these ratings can cause permanent damage to the device. Functional operation of the device at conditions beyond those indicated in the operational sections of this data sheet is not implied. Electrical Characteristics @ 25C Parameter Output Characteristics Load Current Continuous 1 Peak On-Resistance Off-State Leakage Current Switching Speeds Turn-On Turn-Off Output Capacitance Input Characteristics Input Control Current Input Dropout Current Input Voltage Drop Reverse Input Current Common Characteristics Capacitance Input to Output 1 Conditions Symbol Min Typ Max Units t10ms IL=600mA VL=60VP IL ILPK RON ILEAK - 0.85 - 600 2 1 1 mA A VL=50V, f=1MHz ton toff COUT - 25 5 2 - ms ms pF IL = 600mA IF = 10mA VR = 5V IF IF VF IR 0.2 0.9 - 1.2 - 2 1.4 10 mA mA V A - CI/O - 3 - pF IF = 5mA, VL = 10V A If both poles operate, then the load current must be derated so that the package power dissipation value is not exceeded. 2 www.clare.com R03 PAA132 PERFORMANCE DATA* Typical Turn-On Time (N=50, IF=5mA, IL=100mA, TA=25C) 15 10 5 0.80 0.85 0.90 0.95 1.00 10 5 15 10 0 0.31 0.33 0.35 0.37 0.39 0.83 0.41 0.84 0.85 0.86 0.87 0.88 0.89 Turn-Off (ms) On-Resistance () Typical IF for Switch Operation (N=50, TA=25C, IL=600mA) Typical IF for Switch Dropout (N=50, IL=600mA, TA=25C) Typical Blocking Voltage Distribution (N=50, TA=25C) 20 20 15 10 5 35 30 Device Count (N) 25 15 10 5 0.41 0.43 0.45 0.47 0.49 25 20 15 10 5 0 0.39 0 0.39 0.51 0.41 0.43 0.45 0.47 0.49 69.0 0.51 69.5 70.0 70.5 71.0 71.5 LED Current (mA) LED Current (mA) Blocking Voltage (VP) Typical LED Forward Voltage Drop (N=50, IF=5mA, TA=25C) Typical Turn-On vs. LED Forward Current (IL=80mA) Typical Turn-Off vs. LED Forward Current (IL=80mA) Turn-On (ms) 25 20 15 10 5 0 1.17 1.19 1.21 1.23 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 72.0 0.6 0.5 0.4 0.3 0.2 0.1 0 0 1.25 0.7 Turn-Off (ms) 30 5 10 15 20 25 30 35 40 45 0 50 5 10 15 20 25 30 35 40 45 LED Forward Voltage Drop (V) LED Forward Current (mA) LED Forward Current (mA) Typical LED Forward Voltage vs. Temperature Typical Turn-On vs. Temperature (IL=80mA) Typical Turn-Off vs. Temperature (IL=80mA) 1.4 IF=50mA 1.3 IF=20mA 1.2 IF=10mA IF=5mA IF=2mA IF=1mA 1.1 1.0 -20 0 20 40 60 80 Temperature (C) 100 120 Turn-On (ms) 1.5 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0.0 I F = 5mA Turn-Off (ms) 1.6 -40 20 Turn-On (ms) 25 35 25 5 0.29 0 Device Count (N) 15 1.05 Device Count (N) Device Count (N) 0.75 LED Forward Voltage Drop (V) 30 20 0 0 Typical On-Resistance Distribution (N=50, IF=5mA, IL=600mA, TA=25C) 35 Device Count (N) 20 Typical Turn-Off Time (N=50, IF=5mA, IL=100mA, TA=25C) 25 Device Count (N) Device Count (N) 25 I F = 10mA -40 -20 0 20 40 60 Temperature (C) 80 100 0.60 0.55 0.50 0.45 0.40 0.35 0.30 0.25 0.20 0.15 0.10 -40 50 IF = 10mA IF = 5mA -20 0 20 40 60 80 100 Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. R03 www.clare.com 3 PAA132 PERFORMANCE DATA* Typical IF for Switch Operation vs. Temperature (IL=300mA) 1.2 1.2 0.6 0.4 0.8 0.6 0.4 0.2 0.2 0 -20 0 60 20 40 Temperature (C) 80 -40 Typical Load Current vs. Load Voltage (IF=2mA, TA=25C) -20 0.8 0.7 0 20 40 60 Temperature (C) 80 -40 100 Maximum Load Current vs. Temperature (IF=2mA) 0.66 Load Current (A) 200 0 -200 -400 One Pole Operating 0.42 0.36 0.30 Two Poles Operating 0.24 0.18 0.12 -0.4 -0.2 0 0.2 0.4 0.6 -20 0 20 40 60 80 Temperature (C) Typical Leakage vs. Temperature Measured Across Pins 5&6, 7&8 (VP=60V) Load Current (A) Leakage (A) 0.012 0.010 0.008 0.006 0.004 0.002 -20 0 20 40 80 100 70 68 66 64 62 60 60 80 100 -40 120 -20 0 20 40 60 Temperature (C) 80 100 Energy Rating Curve 0.014 0 -40 20 40 60 Temperature (C) 58 -40 Load Voltage (V) 0.016 0 72 0.54 0.48 -20 Typical Blocking Voltage vs. Temperature 0.60 400 -600 -0.6 0.9 0.6 0 100 1.0 Blocking Voltage (VP) -40 Load Current (mA) 1.1 On-Resistance () 0.8 Typical On-Resistance vs. Temperature (IF=2mA, IL=600mA) 1.2 1.0 LED Current (mA) LED Current (mA) 1.0 600 Typical IF for Switch Dropout vs. Temperature (IL=300mA) 100 2.2 2.0 1.8 1.6 1.4 1.2 1.0 0.8 0.6 0.4 0.2 0 10s 100s 1ms 10ms 100ms 1s 10s 100s Time Temperature (C) *The Performance data shown in the graphs above is typical of device performance. For guaranteed parameters not indicated in the written specifications, please contact our application department. 4 www.clare.com R03 PAA132 Manufacturing Information Moisture Sensitivity All plastic encapsulated semiconductor packages are susceptible to moisture ingression. Clare classified all of its plastic encapsulated devices for moisture sensitivity according to the latest version of the joint industry standard, IPC/JEDEC J-STD-020, in force at the time of product evaluation. We test all of our products to the maximum conditions set forth in the standard, and guarantee proper operation of our devices when handled according to the limitations and information in that standard as well as to any limitations set forth in the information or standards referenced below. Failure to adhere to the warnings or limitations as established by the listed specifications could result in reduced product performance, reduction of operable life, and/or reduction of overall reliability. This product carries a Moisture Sensitivity Level (MSL) rating as shown below, and should be handled according to the requirements of the latest version of the joint industry standard IPC/JEDEC J-STD-033. Device Moisture Sensitivity Level (MSL) Rating PAA132 / PAA132S MSL 1 ESD Sensitivity This product is ESD Sensitive, and should be handled according to the industry standard JESD-625. Reflow Profile This product has a maximum body temperature and time rating as shown below. All other guidelines of J-STD-020 must be observed. Device Maximum Temperature x Time PAA132 / PAA132S 250C for 30 seconds Board Wash Clare recommends the use of no-clean flux formulations. However, board washing to remove flux residue is acceptable. Since Clare employs the use of silicone coating as an optical waveguide in many of its optically isolated products, the use of a short drying bake could be necessary if a wash is used after solder reflow processes. Chlorine- or Fluorine-based solvents or fluxes should not be used. Cleaning methods that employ ultrasonic energy should not be used. Pb R03 RoHS 2002/95/EC e3 www.clare.com 5 PAA132 MECHANICAL DIMENSIONS PAA132 2.540 0.127 (0.100 0.005) 9.652 0.381 (0.380 0.015) PCB Hole Pattern 7.620 0.254 (0.300 0.010) 8-0.800 DIA. (8-0.031 DIA.) 2.540 0.127 (0.100 0.005) 9.144 0.508 (0.360 0.020) 6.350 0.127 (0.250 0.005) 6.350 0.127 (0.250 0.005) 0.457 0.076 (0.018 0.003) 3.302 0.051 (0.130 0.002) 7.239 TYP. (0.285) 0.254 TYP (0.01) 4.064 TYP (0.160) 7.620 0.127 (0.300 0.005) 7.620 0.127 (0.300 0.005) Dimensions mm (inches) 0.889 0.102 (0.035 0.004) PAA132S 9.652 0.381 (0.380 0.015) 2.540 0.127 (0.100 0.005) 6.350 0.127 (0.250 0.005) 0.635 0.127 (0.025 0.005) 3.302 0.051 (0.130 0.002) 9.525 0.254 (0.375 0.010) 0.457 0.076 (0.018 0.003) PCB Land Pattern 2.54 (0.10) 8.90 (0.3503) 1.65 (0.0649) 7.620 0.254 (0.300 0.010) 0.254 0.127 (0.010 0.0005) 0.65 (0.0255) 4.445 0.127 (0.175 0.005) Dimensions mm (inches) 0.813 0.120 (0.032 0.004) 6 www.clare.com R03 PAA132 PAA132S Tape & Reel 330.2 DIA. (13.00 DIA.) Top Cover Tape Thickness 0.102 MAX. (0.004 MAX.) K0 =4.90 (0.193) K1 =4.20 (0.165) Embossed Carrier Embossment W=16.00 (0.63) Bo=10.30 (0.406) Ao=10.30 (0.406) P=12.00 (0.472) User Direction of Feed Dimensions mm (inches) NOTES: 1. Dimensions carry tolerances of EIA Standard 481-2 2. Tape complies with all "Notes" for constant dimensions listed on page 5 of EIA-481-2 For additional information please visit our website at: www.clare.com Clare, Inc. makes no representations or warranties with respect to the accuracy or completeness of the contents of this publication and reserves the right to make changes to specifications and product descriptions at any time without notice. Neither circuit patent licenses nor indemnity are expressed or implied. Except as set forth in Clare's Standard Terms and Conditions of Sale, Clare, Inc. assumes no liability whatsoever, and disclaims any express or implied warranty, relating to its products including, but not limited to, the implied warranty of merchantability, fitness for a particular purpose, or infringement of any intellectual property right. The products described in this document are not designed, intended, authorized or warranted for use as components in systems intended for surgical implant into the body, or in other applications intended to support or sustain life, or where malfunction of Clare's product may result in direct physical harm, injury, or death to a person or severe property or environmental damage. Clare, Inc. reserves the right to discontinue or make changes to its products at any time without notice. 7 Specification: DS-PAA132-R03 (c)Copyright 2010, Clare, Inc. OptoMOS(R) is a registered trademark of Clare, Inc. All rights reserved. Printed in USA. 7/29/2010