MT9V024IA7XTMD3 - ON SEMICONDUCTOR

5 Reasons the MT9V024 is

Ideal for Automotive Systems

Reliable Operation in Extreme Temperatures

The –40 to +105°C operating range meets AEC-Q100

speciﬁcations, ensuring optimum performance in harsh

environments.

Context Switching for

Simultaneous Applications

An additional register bank provides the ability to run two

different imaging applications simultaneously from a single

sensor.

Wide Dynamic Range for Superb

High-Contrast Imaging

Extended knee-points provide greater control and excellent

output for excellent output in high-contrast conditions.

Accurate Fast-Motion Capture

The ﬁne shutter control (via sub-row integration) of our

TrueSNAP™ global shutter enables fast-moving object capture

without image tearing.

Small Footprint

Measuring just 9 millimeters square, the MT9V024’s

automotive-grade ball grid array (BGA) package is one of

the smallest in the industry.

Applications

• Lane departure warning

• Adaptive cruise control

• Collision avoidance

• Trafﬁc sign recognition

• Automatic headlamp control

• Pedestrian protection

• Occupant identiﬁcation

• Drowsiness detection

• Smart airbag deployment

• Vehicle theft identiﬁcation

• Drive-by wire

• Blind spot detection

WVGA

1/3-inch

Stand-Alone CMOS Sensor

52-ball IBGA

MT9V024

How to Buy

Production and sample quantities of Aptina

products may be ordered through qualiﬁed

distributors. See our Web site for details. You may also request access

to NDA data sheets and other technical documentation by visiting

our Web site.

MT9V024

Features

• Wide dynamic range

• Real-time exposure context-switching; dual register

• Operating temperature range up to +105°C

• Tested to AEC-Q100 speciﬁcations

• TrueSNAP™ global shutter with simultaneous

integrate and readout

• Monochrome, RGB Bayer, or RCCC (red/clear) color

ﬁlters available

• Enhanced near-IR performance

• Programmable to any window size

(QVGA, CIF, QCIF, etc.)

• Progressive or interlaced readout modes

• 2x2 and 4x4 binning at full resolution

• Simple two-wire serial interface

• Automatic and programmable functions:

regionally weighted exposure, black level offset correction,

horizontal blanking, vertical blanking, lighting control,

windowing, left-right and top-bottom image reversal,

regional gain, image decimation, manual or automatic

high dynamic range

Speciﬁcations

Imaging Array

• Optical Format: 1/3-inch

• Active Array: 752(H) x 480(V)

Speed/Output

• Imaging Area: 4.55mm(H) x 2.97mm(V)

• Frame Rate: 60 fps @ 752H x 480V;

(higher frame rates at lower resolutions)

• Data Rate: 27 Mp/s

• Master Clock: 26 MHz

• Data Format: Parallel/LVDS (serial); selectable 10 to 8 bits

Sensitivity

• Pixel Size: 6μm x 6μm

• Dynamic Range: 80dB to >100dB

• Responsivity: 4.8 V/lux-sec (550nm)

• Minimum Detectable Light: sub-0.1 lux (mono),

5 lux (color)

Power

• Supply: 3.0–3.6V (3.3V nominal)

• Consumption: <160mW @ 60 fps; <120μW standby

Temperature Range

• Operating: –40°C to +105°C

Storage: –50°C to +125°C

Package: automotive qualiﬁed 52-ball iBGA

(9mm x 9mm) or die

Block Diagram

aptina.com

Products are warranted only to meet Aptina’s production data sheet speciﬁcations. Products

and speciﬁcations are subject to change without notice. Aptina, the Aptina logo, and TrueSNAP

are trademarks of Aptina Imaging Corporation. All other trademarks are the property of their