1N5415 thru 1N5420 Available on commercial versions Qualified Levels: JAN, JANTX, JANTXV and JANS VOIDLESS HERMETICALLY SEALED FAST RECOVERY GLASS RECTIFIERS Qualified per MIL-PRF-19500/411 DESCRIPTION This "fast recovery" rectifier diode series is military qualified and is ideal for high-reliability applications where a failure cannot be tolerated. These industry-recognized 3.0 Amp rated rectifiers for working peak reverse voltages from 50 to 600 volts are hermetically sealed with voidless-glass construction using an internal "Category 1" metallurgical bond. These devices are also available in surface mount MELF package configurations. Microsemi also offers numerous other rectifier products to meet higher and lower current ratings with various recovery time speed requirements including fast and ultrafast device types in both through-hole and surface mount packages. Important: For the latest information, visit our website http://www.microsemi.com. FEATURES * Popular JEDEC registered 1N5415 thru 1N5420. * * * * * * Voidless hermetically sealed glass package. Quadruple-layer passivation. Internal "Category 1" Metallurgical bonds. Working Peak Reverse Voltage 50 to 600 Volts. JAN, JANTX, JANTXV and JANS qualification per MIL-PRF-19500/411 available. RoHS compliant versions available (commercial grade only). "B" Package Also available in: APPLICATIONS / BENEFITS * * * * * * * * Fast recovery 3 Amp rectifiers 50 to 600 V. Military and other high-reliability applications. General rectifier applications including bridges, half-bridges, catch diodes, etc. High forward surge current capability. Extremely robust construction. Low thermal resistance. Controlled avalanche with peak reverse power capability. Inherently radiation hard as described in Microsemi "MicroNote 050". "B" MELF or D-5B Package (surface mount) 1N5415US - 1N5420US MAXIMUM RATINGS Parameters/Test Conditions Junction and Storage Temperature (1) Thermal Resistance Junction-to-Lead Forward Surge Current @ 8.3 ms half-sine (4) o Average Rectified Forward Current @ TA = 55 C o @ TA = 100 C Working Peak Reverse Voltage 1N5415 1N5416 1N5417 1N5418 1N5419 1N5420 (5) Maximum Reverse Recovery Time 1N5415 1N5416 1N5417 1N5418 1N5419 1N5420 Solder Temperature @ 10 s Symbol Value TJ and TSTG R JL I FSM (2, 3) IO (3) IO V RWM -65 to +175 22 80 3 2 50 100 200 400 500 600 150 150 150 150 250 400 260 t rr TSP See notes on next page. T4-LDS-0231, Rev. 1 (111902) (c)2011 Microsemi Corporation Unit o C C/W A A o V ns MSC - Lawrence 6 Lake Street, Lawrence, MA 01841 1-800-446-1158 (978) 620-2600 Fax: (978) 689-0803 MSC - Ireland Gort Road Business Park, Ennis, Co. Clare, Ireland Tel: +353 (0) 65 6840044 Fax: +353 (0) 65 6822298 o C Website: www.microsemi.com Page 1 of 5 1N5415 thru 1N5420 MAXIMUM RATINGS Notes: 1. 2. 3. 4. At 3/8 inch (10 mm) lead length from body. o o o Derate linearly at 22 mA/ C for 55 C < T A < 100 C. o o Above T A = 100 C, derate linearly at 26.7 mA/ C to zero at T A = 175 oC. These ambient ratings are for PC boards where thermal resistance from mounting point to ambient is sufficiently controlled where T J(max) o does not exceed 175 C. 5. I F = 0.5 A, I RM = 1 A, I R(REC) = 0.250 A. MECHANICAL and PACKAGING * * * * * * * CASE: Hermetically sealed voidless hard glass with Tungsten slugs. TERMINALS: Axial-leads are Tin/Lead (Sn/Pb) over Copper. RoHS compliant matte-Tin is available for commercial grade only. MARKING: Body paint and part number, etc. POLARITY: Cathode band. TAPE & REEL option: Standard per EIA-296. Contact factory for quantities. WEIGHT: 750 milligrams. See Package Dimensions on last page. PART NOMENCLATURE JAN 1N5415 (e3) Reliability Level JAN = JAN Level JANTX = JANTX Level JANTXV = JANTXV Level JANS = JANS Level Blank = commercial RoHS Compliance e3 = RoHS compliant (available on commercial grade only) Blank = non-RoHS compliant JEDEC type number See Electrical Characteristics table SYMBOLS & DEFINITIONS Definition Symbol V BR V RWM IO VF IR t rr Minimum Breakdown Voltage: The minimum voltage the device will exhibit at a specified current. Working Peak Reverse Voltage: The maximum peak voltage that can be applied over the operating temperature range excluding all transient voltages (ref JESD282-B). Average Rectified Output Current: The Output Current averaged over a full cycle with a 50 Hz or 60 Hz sine-wave input and a 180 degree conduction angle. Maximum Forward Voltage: The maximum forward voltage the device will exhibit at a specified current. Maximum Reverse Current: The maximum reverse (leakage) current that will flow at the specified voltage and temperature. Reverse Recovery Time: The time interval between the instant the current passes through zero when changing from the forward direction to the reverse direction and a specified decay point after a peak reverse current occurs. T4-LDS-0231, Rev. 1 (111902) (c)2011 Microsemi Corporation Page 2 of 5 1N5415 thru 1N5420 ELECTRICAL CHARACTERISTICS TYPE MINIMUM BREAKDOWN VOLTAGE FORWARD VOLTAGE MAXIMUM REVERSE CURRENT I R @ V RWM VF @ 9 A V BR @ 50 A 1N5415 1N5416 1N5417 1N5418 1N5419 1N5420 T4-LDS-0231, Rev. 1 (111902) Volts 55 V 110 V 220 V 440 V 550 V 660 V CAPACITANCE C VR @ 4 V MIN. Volts MAX. Volts 25 oC A 100 oC A pF 0.6 0.6 0.6 0.6 0.6 0.6 1.5 1.5 1.5 1.5 1.5 1.5 1.0 1.0 1.0 1.0 1.0 1.0 20 20 20 20 20 20 550 430 250 165 140 120 (c)2011 Microsemi Corporation Page 3 of 5 1N5415 thru 1N5420 ZOJX (oC/Watt) IF - CURRENT (A) GRAPHS % PIV tH Heating Time (seconds) FIGURE 2 Maximum Thermal Impedance IF - CURRENT (A) FIGURE 1 Typical Reverse Current vs. PIV VF - VOLTAGE (V) FIGURE 3 Typical Forward Current vs. Forward Voltage T4-LDS-0231, Rev. 1 (111902) (c)2011 Microsemi Corporation Page 4 of 5 1N5415 thru 1N5420 PACKAGE DIMENSIONS Symbol Dimensions Inches Millimeters BD Min 0.110 Max Min 0.180 2.79 Max 4.57 LD BL LL 0.036 0.130 0.90 0.042 0.91 0.260 3.30 1.30 22.9 1.07 6.60 33.0 Notes 3 4 4 NOTES: 1. Dimensions are in inches. 2. Millimeter equivalents are given for general information only. 3. Dimension BD shall be measured at the largest diameter. 4. The BL dimension shall include the entire body including slugs and sections of the lead over which the diameter is uncontrolled. This uncontrolled area is defined as the zone between the edge of the diode body and extending .050 inch (1.27 mm) onto the leads. 5. In accordance with ASME Y14.5M, diameters are equivalent to x symbology. T4-LDS-0231, Rev. 1 (111902) (c)2011 Microsemi Corporation Page 5 of 5