Time Delay Relays Dedicated - Delay-on-Make TMV8000 / TSU2000 SERIES Universal Voltage Delay-on-Make Timer Description The TMV and TSU Series are universal voltage delay-on-make timers. Two models cover all the popular voltages and time delays. Available with knob or external adjust time delay. Its simple two terminals can easily be connected in series with a relay coil, contactor coil, solenoid, lamps, small motor, etc., to delay their energization, prevent short cycling or to sequence on various loads. Operation (Delay-on-Make) Upon application of input voltage, the time delay begins. The output is de-energized before and during the time delay. At the end of the time delay, the output energizes and remains energized until input voltage is removed. TMV8000 TSU2000 Reset: Removing input voltage resets the time delay and output. Features & Benefits Wiring Diagram L1 N/L2 Load may be connected to terminal 3 or 1. TMV has knob adjustment. TSU has external adjustment terminals 4 & 5. FEATURES BENEFITS Universal AC/DC operating voltage Provides flexibility for use in all systems Totally solid-state and encapsulated No moving parts to arc and wear out over time and encapsulated to protect against shock, vibration, and humidity Two terminal series connection with the load Provides quick and easy installation for new or existing systems 1A steady, 10A inrush solid-state output Provides 100 million operations in typical conditions Accessories P1004-95, P1004-95-X Versa-Pot Panel mountable, industrial potentiometer recommended for remote time delay adjustment. P1023-6 Mounting bracket The 90 orientation of mounting slots makes installation/removal of modules quick and easy. P0700-7 Versa-Knob Designed for 0.25 in (6.35 mm) shaft of Versa-Pot. Semi-gloss industrial black finish. Ordering Information MODEL INPUT VOLTAGE ADJUSTMENT TIME DELAY TMV8000 24 to 240VAC/DC Onboard 0.1 - 8m TSU2000 24 to 240VAC/DC External 5 - 480s If you don't find the part you need, call us for a custom product 800-843-8848 (c) 2016 Littelfuse Protection Relays & Controls www.littelfuse.com/ www.littelfuse.com/tmv8000-tsu2000 P1015-64 (AWG 14/16) Female Quick Connect These 0.25 in. (6.35 mm) female terminals are constructed with an insulator barrel to provide strain relief. P1015-18 Quick Connect to Screw Adapter Screw adapter terminal designed for use with all modules with 0.25 in. (6.35 mm) male quick connect terminals. Rev: 1-B-100416 Time Delay Relays Dedicated - Delay-on-Make TMV8000 / TSU2000 SERIES Specifications Accessories C103PM (AL) DIN Rail 35 mm aluminum DIN rail available in a 36 in. (91.4 cm) length. Time Delay Type Range P1023-20 DIN Rail Adapter Allows module to be mounted on a 35 mm DIN type rail with two #10 screws. Repeat Accuracy Tolerance (Factory Calibration) Reset Time Input Voltage AC Line Frequency Output Type Form Maximum Load Current Minimum Holding Current Voltage Drop Protection Circuitry Dielectric Breakdown Insulation Resistance Mechanical Mounting Dimensions Selection Guide Function Diagram DELAY-ON-MAKE (ON-DELAY) (c) 2016 Littelfuse Protection Relays & Controls www.littelfuse.com/ www.littelfuse.com/tmv8000-tsu2000 V = Voltage NO = Normally Open Contact NC = Normally Closed Contact TD = Time Delay R = Reset = Undefined Time Termination terminals Environmental Operating/Storage Temperature Humidity Weight Analog circuitry 5 - 480s (TSU2000) 0.1 - 8m (TMV8000) 2% 10% 100ms 24 to 240VAC/DC 20% 50/60 Hz Solid State NO, open during timing 1A steady state, 10A inrush at 55C 40mA 2.5V @ 1A Encapsulated 2000V RMS terminals to mounting surface 100 M Surface mount with one #10 (M5 x 0.8) screw H 50.8 mm (2"); W 50.8 mm (2"); D 30.7 mm (1.21") 0.25 in. (6.35 mm) male quick connect -20 to 70C / -30 to 85C 95% relative, non-condensing 2.4 oz (68 g) Rev: 1-B-100416