B2
Ribbon Cable Connector
HIF4 Series
■Features
1. Current Capacity
The HIF4 series connector is capable of 3 A current capacity used
for wider applications, while the HIF3 series uses 1 A capacity.
2. Full Lock Mechanism
This connector is equipped with a Hirose original locking
mechanism, and guarantees excellent reliability for vibration and
shock.
3.
One-touch Insertion and Extraction Mechanism
This connector is equipped with levers for automatic insertion and
extraction, as soon as lock is reset. Insertion and extraction tools
are not required.
4. Applicable Cable
The applicable cable is UL2651 AWG#24 flat cable (7
cores./0.203mm, jacket dia :1.0 to 1.2mm).
■Product Specifications
Note 1: Includes temperature rise caused by current flow.
Note 2: The term "storage" refers to products stored for long period of time prior to mounting and use. Operating Temperature Range and
Humidity range covers non conducting condition of installed connectors in storage, shipment or during transportation.
Note 3: Information contained in this catalog represents general requirements for this Series.Contact us for the drawings and specifications for
a specific part number shown.
Note 4: Please note that there is a risk of deforming the lock when an excessive load is applied to the inside.
■Applications
Computers, terminal equipment, various kinds of electronic equipment, and office automation machines
Rating Current rating : 3A
Operating Temperature Range
:
–55 to +85ç(Note 1)
Storage Temperature Range : –10 to +60ç(Note 2)
Voltage rating : 300V AC Operating Moisture Range : 40 to 80%Storage Humidity Range : 40 to 70% (Note 2)
■Material
Item Specification Condition
1. Insulation Resistance 1000M ohms min 500V DC
2. Withstanding voltage No flashover or insulation breakdown. 1000V AC/1 minute
3. Contact Resistance 15m ohms max 0.1A
4.
Vibration
No electrical discontinuity of 1µs or more
Frequency: 10 to 55 Hz, single amplitude of 0.75 mm, 2 hours in each of the 3 directions.
5.
Humidity (Steady state)
Insulation resistance: 1000M ohms min.
96 hours at temperature of 40ç and humidity of 90% to 95%
6. Temperature Cycle No damage, cracks, or parts looseness.
(-65ç: 30 minutes ➝ 15 to 35ç: 5 minutes max.
125ç: 30 minutes ➝15 to 35ç: 5 minutes max.) 5 cycles
7.
Operating Life
Contact resistance: 15m ohms max. 500 cycles
8.
Resistance to Soldering heat
No deformation of components affecting performance.
Solder bath: 260ç for 10 seconds
Manual soldering: 360ç for 5 seconds
Part Material Finish Remarks
Insulator PBT Black UL94V-0
Contact Socket Beryllium copper Gold plated over nickel underplating –––––––
Pin header Phosphor bronze Gold plated over nickel underplating
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B3
HIF4 Series●Ribbon Cable Connector
HIF4 - **D - 3.18 R
qewrt
■Ordering Information
●Pin Header
qSeries Name : HIF4
wNumber of Contacts : 16, 20, 26, 34, 40
eContact alignment : D : Double
rContact Pitch : 3.18mm
tConnection type : Ribbon cable
●Socket
HIF4 - **P - 3.18 DS
qewrt
qSeries Name : HIF4
wNumber of Contacts : 16, 20, 26, 34, 40
eContact alignment : P : Pin header
rContact Pitch : 3.18mm
tContact Type
DS : Right angle type
SA : Straight dip type
W : Wrapping type
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B4
HIF4 Series●Ribbon Cable Connector
■Socket
Unit:mm
Unit:mm
■Pin Header Right Angle Type
CL No.Part Number
563-0025-5
563-0010-8
563-0011-0
563-0012-3
563-0029-6
HIF4-16D-3.18R
HIF4-20D-3.18R
HIF4-26D-3.18R
HIF4-34D-3.18R
HIF4-40D-3.18R
Number of Contacts
16
20
26
34
40
A B
31.98
38.34
47.88
60.60
70.14
22.26
28.62
38.16
50.88
60.42
C
26.28
32.64
42.18
54.90
64.44
CL No.Part Number
563-0026-8
563-0001-7
563-0002-0
563-0003-2
563-0030-5
HIF4-16P-3.18DS
HIF4-20P-3.18DS
HIF4-26P-3.18DS
HIF4-34P-3.18DS
HIF4-40P-3.18DS
Number of Contacts
16
20
26
34
40
A B
46.68
53.04
62.58
75.30
84.84
32.18
38.54
48.08
60.80
70.34
C D E F RoHS
42.82
63.28
49.18
69.64
58.72
79.18
71.44
91.90
80.89
101.44
39.98
46.34
55.88
68.60
78.14
33.58
39.94
49.48
62.20
71.74
YES
RoHS
YES
22.26
28.62
38.16
50.88
60.42
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B5
HIF4 Series●Ribbon Cable Connector
■Pin Header Straight Through hole Type
Unit:mm
■Pin Header Wrapping Type
CL No.Part Number
563-0028-3
563-0007-3
563-0008-6
563-0009-9
563-0032-0
HIF4-16P-3.18W
HIF4-20P-3.18W
HIF4-26P-3.18W
HIF4-34P-3.18W
HIF4-40P-3.18W
Number of Contacts
16
20
26
34
40
A B
46.68
53.04
62.58
75.30
84.84
32.18
38.54
48.04
60.80
70.34
C D E F RoHS
42.82
63.28
49.18
69.64
58.72
79.18
71.44
91.90
80.98
101.44
39.98
46.34
55.88
68.60
78.14
33.58
39.94
49.48
62.20
71.74
YES
RoHS
YES
22.26
28.62
38.16
50.88
60.42
Unit:mm
CL No.Part Number
563-0027-0
563-0004-5
563-0005-8
563-0006-0
563-0031-8
HIF4-16P-3.18DSA
HIF4-20P-3.18DSA
HIF4-26P-3.18DSA
HIF4-34P-3.18DSA
HIF4-40P-3.18DSA
Number of Contacts
16
20
26
34
40
A B
46.68
53.04
62.58
75.30
84.84
32.18
38.54
48.08
60.80
70.34
C D E F
42.82
63.28
49.18
69.64
58.72
79.18
71.44
91.90
80.98
101.44
39.98
46.34
55.88
68.60
78.14
33.58
39.94
49.48
62.20
71.74
22.26
28.62
38.16
50.88
60.42
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B6
HIF4 Series●Ribbon Cable Connector
BPCB mounting pattern
Number of Contacts
A
16
20
26
34
40
22.26
28.62
38.16
50.88
60.42
B
33.58
39.94
49.48
62.20
71.74
●Pin Header Right Angle Type
●Type Shape
Number of Contacts
A
16
20
26
34
40
22.26
28.62
38.16
50.88
60.42
B
39.98
46.34
55.88
68.60
78.14
●Pin Header Straight Through hole Type or Pin Header Wrapping Type
DSA type W type
DS type
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B7
HIF4 Series●Ribbon Cable Connector
BHIF4 Basic Connection Method
Fig.1
Type AO
Type BO
Type CO
Type DO
Type AD
A side D side
*Kmark and Kmark
Kmark and ●mark
Type CD
C side D side
*Kmark and Kmark
Kmark and ●mark
Type AB
Type A side Type B side
*Kmark and Kmark
Kmark and ●mark
As shown below in Figure 1, contact positions are
indicated by marks (K●◆◆).
The connected contact is indicated with a symbol next to
the individual type name. However, the contact symbol
connected to the cable mark is indicated at the mark *.
M
■
M
■
M
■
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
B8
HIF4 Series●Ribbon Cable Connector
Note 1: Cable length tolerance
500 +10, 0 max. (mm)
500 +3%, 0% min.
Note 2.When a twist cable or a slit (like a
roller screen) cable is used, the
cable pitch will change according
to cable manufacturers. If
connection failure has occurred,
consult HRS Sales Department.
According to the illustration on
the left, the illustration 1 indicates
these positions on the right.
Type CC
C side C side
*Kmark and Kmark
Kmark and Kmark
Type AA
A side A side
*Kmark and Kmark
Kmark and Kmark
Contact positions are designated with marks as shown below.
Type AC
A side C side
*Kmark and Kmark
Kmark and Kmark
M
M
M
M
M
M
The product information in this catalog is for reference only. Please request the Engineering Drawing for the most current and accurate design information.
All non-RoHS products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales representative.
