VK Type 14. 2x 9.3 mm SMD PE CL/LVDS Voltage C o n t r o l l e d C r y s ta l O s c i l l a t o r FEATURE - Typical 14.2x9.3x5.5mm 6 pads ceramic SMD package. - Tight symmetry (45 to 55%) available. - Wide frequency control range. - Low phase jitter (Max: 0.5 pSec). - Complementary Output. - Packing: Tape & Reel, 500pcs per Reel. TYPICAL APPLICATION - Set-top Box, HDTV - Wimax/WLAN - xDSL/ VoIP, Cable modem RoHS Compliant Standard SOLDER PAD LAYOUT (mm) DIMENSION (mm) Recommended Soldering Pattern ELECTRICAL SPECIFICA TION PECL Parameter LVDS 3.3V 2.5V 3.3V Unit 2.5V Min. Max Min. Max. Min. Max. Min. Max. 3.135 3.465 2.375 2.625 3.135 3.465 2.375 2.625 V 1.5 200 65 200 1.5 200 65 200 MHz Absolute Pulling Range (APR) 50 - 50 - 50 - 50 - ppm Control Voltage Range 0.3 3.0 0 2.5 0.3 3.0 0 2.5 V - 75 - 75 - 45 - 45 Supply Voltage Variation (VDD) 5% Frequency Range Standard Frequency Supply Current 77.76, 106.25, 122.88, 125, 155.52, 156.25, 200 1.5MHz F0 < 65MHz 65MHz F0 200MHz Output Level Output High (Logic "1") Output Low (Logic "0") Transition Time:Rise/Fall Time + Start Time MHz mA - 100 - 100 - 80 - 80 2.275 - 1.475 - - 1.6 - 1.6 - 1.68 - 1.095 0.9 - 0.9 - - 1.0 - 1.0 - 1.0 - 1.0 nSec - 3 - 3 - 3 - 3 mSec V Tri-State (input to Pin 2, Enable Low) Enable (Low voltage or GND or floating) Disable (Low voltage or GND) Linearity - 0.3 VDD - 0.3 VDD - 0.3 VDD - 0.3 VDD 0.7 VDD - 0.7 VDD - 0.7 VDD - 0.7 VDD - V - 10 - 10 - 10 - 10 % Modulation Bandwidth (BW) 25 - 25 - 25 - 25 - KHz Inut Impedance 50 - 50 - 50 - 50 - K RMS Phase Jitter(Integrated 12KHz~20MHz F0 < 100MHz - 1 - 1 - 1 - 1 100MHz F0 < 125MHz - 0.7 - 0.7 - 0.7 - 0.7 125MHz F0 < 150MHz - 0.5 - 0.5 - 0.5 - 0.5 150MHz F0 - Phase Noise @155.52MHz - 0.3 100 Hz - -80 1 KHz - -110 10 KHz - -130 0.3 - 0.3 - 0.3 -80 - -80 - -80 - -110 - -110 - -110 - -130 - -130 - -130 pSec dBc/Hz Aging (@25 1st year) - 3 - 3 - 3 - 3 ppm Storage Temp. Range -55 125 -55 125 -55 125 -55 125 Standard frequencies are frequencies which the crystal has been designed and does no imply a stock position +Transition times are measured between 20% and 80% of VDD. Packing: Tape & Reel, 500pcs per Reel. FREQ. STABILITY vs. TEMP. RANGE Rev(12)01/2013 www.taitien.com sales@taitien.com.tw Specifications subject to change without notice