July 2005/ C
Page 1
SEMICONDUCTOR
TAK CHEONG
®
500 mW LL-34 Hermetically
Sealed Glass Zener Voltage
Regulators
Absolute Ma ximum Ra ti ng s TA = 25°C unless otherwise noted
Parameter Value Units
Power Dissipation 500 mW
Storage Temperature Range -65 to +200 °C
Operating Junction Temperature +200 °C
These ratings are limiting values above which the serviceability of the diode may be impaired.
Specification Features:
Zener Voltage Range 2.4 to 56 Volts
LL-34 (Mini-MELF) Package
Surface Device Type Mounting
Hermetically Sealed Glass
Compression Bonded Construction
All external surfaces are corrosion resistant and leads are readily solderable
1st band indicates negative polarity
Electrical Characteristics TA = 25°C unless otherwise noted
Device Type VZ @ IZT
(Volts)
Nominal
IZT
(mA)
ZZT @ IZT
()
Max
ZZK @ IZK = 0.25mA
()
Max
IR @ VR
(µA)
Max
VR
(Volts)
TCLLZ5221B 2.4 20 30 1200 100 1
TCLLZ5222B 2.5 20 30 1250 100 1
TCLLZ5223B 2.7 20 30 1300 75 1
TCLLZ5224B 2.8 20 30 1400 75 1
TCLLZ5225B 3 20 29 1600 50 1
TCLLZ5226B 3.3 20 28 1600 25 1
TCLLZ5227B 3.6 20 24 1700 15 1
TCLLZ5228B 3.9 20 23 1900 10 1
TCLLZ5229B 4.3 20 22 2000 5 1
TCLLZ5230B 4.7 20 19 1900 5 2
TCLLZ5231B 5.1 20 17 1600 5 2
TCLLZ5232B 5.6 20 11 1600 5 3
TCLLZ5233B 6 20 7 1600 5 3.5
TCLLZ5234B 6.2 20 7 1000 5 4
TCLLZ5235B 6.8 20 5 750 3 5
TCLLZ5236B 7.5 20 6 500 3 6
TCLLZ5237B 8.2 20 8 500 3 6.5
TCLLZ5238B 8.7 20 8 600 3 6.5
TCLLZ5239B 9.1 20 10 600 3 7
TCLLZ5240B 10 20 17 600 3 8
TCLLZ5241B 11 20 22 600 2 8.4
TCLLZ5242B 12 20 30 600 1 9.1
TCLLZ5243B 13 9.5 13 600 0.5 9.9
Cathode Anode
ELECTRICAL SYMBOL
DEVICE MARKING DIAGRAM
Cathode Band Color Tolerance
Brown 10%
Blue 5%
Orange 2%
Yellow 1%
SURFACE MOUNT
LL34
TCLLZ5221B through TCLLZ5263B Series
July 2005/ C
Page 2
SEMICONDUCTOR
TAK CHEONG
®
Electrical Characteristics TA = 25°C unless otherwise noted
Device Type VZ @ IZT
(Volts)
Nominal
IZT
(mA)
ZZT @ IZT
()
Max
ZZK @ IZK = 0.25mA
()
Max
IR @ VR
(µA)
Max
VR
(Volts)
TCLLZ5244B 14 9 15 600 0.1 10
TCLLZ5245B 15 8.5 16 600 0.1 11
TCLLZ5246B 16 7.8 17 600 0.1 12
TCLLZ5247B 17 7.4 19 600 0.1 13
TCLLZ5248B 18 7 21 600 0.1 14
TCLLZ5249B 19 6.6 23 600 0.1 14
TCLLZ5250B 20 6.2 25 600 0.1 15
TCLLZ5251B 22 5.6 29 600 0.1 17
TCLLZ5252B 24 5.2 33 600 0.1 18
TCLLZ5253B 25 5 35 600 0.1 19
TCLLZ5254B 27 4.6 41 600 0.1 21
TCLLZ5255B 28 4.5 44 600 0.1 21
TCLLZ5256B 30 4.2 49 600 0.1 23
TCLLZ5257B 33 3.8 58 700 0.1 25
TCLLZ5258B 36 3.4 70 700 0.1 27
TCLLZ5259B 39 3.2 80 800 0.1 30
TCLLZ5258B 36 3.4 70 700 0.1 27
TCLLZ5259B 39 3.2 80 800 0.1 30
TCLLZ5260B 43 3 93 900 0.1 33
TCLLZ5261B 47 2.7 105 1000 0.1 36
TCLLZ5262B 51 2.5 125 1100 0.1 39
TCLLZ5263B 56 2.2 150 1300 0.1 43
VF Forward Voltage = 1.1 V Maximum @ IF = 200 mA for all types
Notes:
1. The type numbers listed have zener voltage as shown and have a standard tolerance on the nominal zener voltage of ±5% in
Blue marking, suffix A=±10% in Brown marking, C= ±2% in Orange marking and D = ±1% in Yellow marking.
2. For detailed information on price, availability and delivery of nominal zener voltages between the v oltages shown and tighter
voltage tolerances, contact your nearest Tak Cheong Electronics representative.
3. The zener impedance is derived from the 60-cycle ac voltage, which results when an ac current having an rms value equal to
10% of the dc zener current (IZT or IZK) is superimposed to IZT or IZK.
Electrical Symbol Definition Typical Characteristics
Symbol Parameter
VZ Reverse Zener Voltage @ IZT
IZT Reverse Current
ZZT Maximum Zener Impedance @ IZT
IZK Reverse Current
ZZK Maximum Zener Impedance @ IZK
IR Reverse Leakage Current @ VR
VR Breakdown Voltage
IF Forward Current
VF Forward Voltage @ IF
V
I
(mV)
(V)
(mA)
(mA)
VF
IF
VR IR
VZ
IZT
(nA)
July 2005/ C
Page 3
SEMICONDUCTOR
TAK CHEONG
®
Ordering Information
Device Pack Option Package Quantity
TCLLZ52xxB 7” Reel Tape and Reel 2500
TCLLZ52xxBR13 13” Reel Tape and Reel 10,000
TCLLZ52xxB Others (…contact Tak Cheong sales representatives)
LL34 (Mini-MELF) Tape Packaging Standards
This standard practices for surface-mount tape packaging of leadless (Mini-MELF) components meets the requirements of EI A Standard
RS-481-A.
July 2005/ C
Page 4
SEMICONDUCTOR
TAK CHEONG
®
LL-34 (Mini-MELF) Tape & Reel Packaging Information
Label
Antistatic Cover Tape
Static Dissipative Embossed
Carrier Tape
Cathode
Label
LL34 UNIT ORIENTATION
Carrier Tape
Cover Tape Trailer Tape
80mm minimum or
20 empty pockets.
Leader Tape
500mm minimum or
125 empty pockets.
Components
Packaging Description:
LL34 parts are shipped in tape and reel.
The c arrier ta pe is mad e from a dis sipati ve
(carton filled) polycarbonate resin. The
cover tape is a multiplayer film (Heat
Activated Adhesive in nature) primarily
composed of polyester film, adhesive layer,
sealant, and anti-static sprayed agent.
These reeled parts in standard option are
shipped with 2,500 units per 7” or 178mm
diameter reel. The reels are blue in color
and made of recyclable plastic. Other
option comes in 10,000 units per 13” or
330mm diameter reel
LL-34 Packaging Outline
LL-34 Leader and Trailer
July 2005/ C
Page 5
SEMICONDUCTOR
TAK CHEONG
®
LL-34 (Mini-MELF) Tape & Reel Packaging Information
LL-34 Reel Outline
Dimensions are in millimeters
Tape Size QTY Option Dim A Dim B Dim C Dim D Dim N W1 W2 W3
2,500 178 1.5 13 20.2 55 8.4 14.4 7.9 10.9
8mm 10,000 330 1.5 13 20.2 100 8.4 14.4 7.9 10.9
July 2005/ C
Page 6
SEMICONDUCTOR
TAK CHEONG
®
Package Outline
Package Case Outline
LL34
LL-34
Millimeters Inches
DIM
Min Max Min Max
A 3.302 3.505 0.130 0.138
B 1.397 1.499 0.055 0.059
C 0.350 0.500 0.014 0.020
Notes: 1. LL34 pol arity d enoted by a band.
2. ‘Expansion Gap’ has no relation to the location of polarity.