MBR6035PT - MBR60150PT 60 AMPS. Schottky Barrier Rectifiers TO-3P/TO-247AD Features Plastic material used carries Underwriters Laboratory Classifications 94V-0 Metal silicon rectifier, majority carrier conduction Low power loss, high efficiency High current capability, low forward voltage drop High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection High temperature soldering guaranteed: 260oC/10 seconds,0.17"(4.3mm)from case Mechanical Data Cases: JEDEC TO-3P/TO-247AD molded plastic body Terminals: Pure tin plated, lead free. solderable per MIL-STD-750, Method 2026 Polarity: As marked Mounting position: Any Mounting torque: 10 in. - lbs. max Weight: 0.2 ounce, 5.6 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics o Rating at 25 C ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol MBR MBR MBR MBR MBR MBR MBR Units Type Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage Maximum Average Forward Rectified Current at Tc=125OC Peak Repetitive Forward Current (Rated V R, Square Wave, 20KHz) at Tc=120oC Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Peak Repetitive Reverse Surge Current (Note 1) Maximum Instantaneous Forward Voltage at (Note 2) IF=30A, Tc=25OC IF=30A, Tc=125OC IF=60A, Tc=25OC Maximum Instantaneous Reverse Current @Tc=25 oC at Rated DC Blocking Voltage Per Leg @ Tc=125 oC (Note 1) Voltage Rate of Change at (Rated VR) Typical Thermal Resistance Per Leg (Note 3) Operating Junction Temperature Range Storage Temperature Range Notes: VRRM VRMS VDC 6035 PT 35 24 35 6045 PT 45 31 45 6050 PT 50 35 50 6060 PT 60 42 60 6090 60100 60150 PT PT PT 90 100 150 63 70 105 90 100 150 V V V I(AV) 60 A IFRM 60 A IFSM 420 A IRRM 1.0 A VF IR dV/dt R JC TJ TSTG 0.70 0.60 0.82 1.0 30 0.84 0.98 0.75 0.65 0.93 1.0 20 1,000 1.2 -65 to +150 -65 to +175 10 0.92 1.02 0.98 0.1 5.0 V mA mA V/uS o C/W o C o C 1. 2.0us Pulse Width, f=1.0 KHz 2. Pulse Test: 300us Pulse Width, 1% Duty Cycle 3. Thermal Resistance from Junction to Case Per Leg Version: A06 RATINGS AND CHARACTERISTIC CURVES (MBR6035PT THRU MBR60150PT) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG FIG.1- FORWARD CURRENT DERATING CURVE 600 RESISTIVE OR INDUCTIVE LOAD PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 75 60 45 30 15 50 100 o CASE TEMPERATURE. ( C) 150 Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method 400 300 200 100 0 0 0 500 1 10 100 NUMBER OF CYCLES AT 60Hz FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG FIG.4- TYPICAL REVERSE CHARACTERISTICS PER LEG 50 500 Pulse Width=300 s 1% Duty Cycle INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT. (A) 10 Tj=125 0C MBR6050PT-MBR60150PT 100 10 Tj=25 0C MBR6050PT-MBR60150PT 1 Tj=125 0C MBR6035PT-MBR6045PT Tj=125 0C 1 Tj=75 0C 0.1 0.01 Tj=25 0C Tj=25 0C MBR6035PT-MBR6045PT 0.1 0.001 0 0.1 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 40 60 80 100 120 140 100 TRANSIENT THERMAL IMPEDANCE. ( OC/W) JUNCTION CAPACITANCE.(pF) 20 FIG.6- TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG FIG.5- TYPICAL JUNCTION CAPACITANCE PER LEG 5,000 Tj=25 0C f=1.0MHz Vsig=50mVp-p 1,000 MBR6035PT-MBR6045PT MBR6050PT & MBR6060PT MBR6090PT-MBR60150PT 0.1 0 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FORWARD VOLTAGE. (V) 100 MBR6035PT-MBR6045PT MBR6050PT & MBR60150PT 1 10 REVERSE VOLTAGE. (V) 100 10.0 1 0.1 0.01 0.1 1 T, PULSE DURATION. (sec) 10 Version: A06 100