STEVAL-MKI193V1 Data brief ASM330LHH adapter board for a standard DIL24 socket Features * * * * * Complete ASM330LHH pinout for a standard DIL 24 socket Fully compatible with STEVAL-MKI109V3 motherboards Changing the resistor settings is also compatible with the STEVAL-MKI109V2 motherboard WEEE compliant RoHS compliant Description The STEVAL-MKI193V1 is an adapter board designed to facilitate the evaluation of MEMS devices in the ASM330LHH product family. The board offers an effective solution for fast system prototyping and device evaluation directly within the user's own application. The STEVAL-MKI193V1 can be plugged into a standard DIL 24 socket. The adapter provides the complete ASM330LHH pin-out and comes ready-to-use with the required decoupling capacitors on the VDD power supply line. This adapter is supported by the STEVAL-MKI109V3 motherboard with high performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable graphical user interface (Unico GUI), or dedicated software routines for customized applications. Product summary LSM6DSR adapter board STEVALfor a standard DIL24 MKI194V1 socket Automotive 6-axis inertial module: 3D ASM330LHH accelerometer and 3D gyroscope ST MEMS adapter motherboard based on the STM32F401VET6 compatible with ST MEMS adapters STEVALMKI109V3 DB3687 - Rev 1 - April 2019 For further information contact your local STMicroelectronics sales office. www.st.com STEVAL-MKI193V1 Shematic diagram 1 Schematic diagrams CS 12 CS SCL 13 SCx INT2 INT1 VDD VDDIO 5 VDDIO INT1 4 OCS 11 OSDO R1 R0 P18 10 OCS 9 8 P24 VDD P17 P16 SDx R6 R0 DNM R7 R0 P6 SCx R4 R0 DNM R5 R0 P5 OCS R2 R0 DNM R3 R0 P4 INT2 GND 3 OSDO 7 SCx SDO SDx GND 2 GND SDx U1 ASM330LHH P3 6 1 GND SDO SCL SDA SDA 14 Figure 1. STEVAL-MKI193V1 circuit schematic OSDO R8 R0 DNM GND C1 100nF GND GND GND VDD VDDIO JP1 C2 100nF GND VDD VDDIO P3 P4 P5 P6 1 2 3 4 5 6 7 8 9 10 11 12 Header 12 JP2 24 23 22 21 20 19 18 17 16 15 14 13 P24 SDO SDA SCL CS P18 P17 P16 INT2 INT1 GND Header 12 GND DB3687 - Rev 1 page 2/4 STEVAL-MKI193V1 Revision history Table 1. Document revision history DB3687 - Rev 1 Date Version 03-Apr-2019 1 Changes Initial release. page 3/4 STEVAL-MKI193V1 IMPORTANT NOTICE - PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ("ST") reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST's terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers' products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document. (c) 2019 STMicroelectronics - All rights reserved DB3687 - Rev 1 page 4/4