Features
•Complete ASM330LHH pinout for a standard DIL 24 socket
• Fully compatible with STEVAL-MKI109V3 motherboards
• Changing the resistor settings is also compatible with the STEVAL-MKI109V2
motherboard
• WEEE compliant
• RoHS compliant
Description
The STEVAL-MKI193V1 is an adapter board designed to facilitate the evaluation of
MEMS devices in the ASM330LHH product family. The board offers an effective
solution for fast system prototyping and device evaluation directly within the user’s
own application.
The STEVAL-MKI193V1 can be plugged into a standard DIL 24 socket. The adapter
provides the complete ASM330LHH pin-out and comes ready-to-use with the
required decoupling capacitors on the VDD power supply line.
This adapter is supported by the STEVAL-MKI109V3 motherboard with high
performance 32-bit microcontroller functioning as a bridge between the sensor and a
PC, on which it is possible to use the downloadable graphical user interface (Unico
GUI), or dedicated software routines for customized applications.
Product summary
LSM6DSR adapter board
for a standard DIL24
socket
STEVAL-
MKI194V1
Automotive 6-axis inertial
module: 3D
accelerometer and 3D
gyroscope
ASM330LHH
ST MEMS adapter
motherboard based on
the STM32F401VET6
compatible with ST
MEMS adapters
STEVAL-
MKI109V3
ASM330LHH adapter board for a standard DIL24 socket
STEVAL-MKI193V1
Data brief
DB3687 - Rev 1 - April 2019
For further information contact your local STMicroelectronics sales office.
www.st.com
1Schematic diagrams
Figure 1. STEVAL-MKI193V1 circuit schematic
GND
GND
GND
VDD
VDDIO
SCx
P17
GND
INT1
INT2
CS
SCL
SDA
SDO
VDDIO
GND
GND
INT1
SCx
SDx
SDO
SDA
SCL
CS
OCS
INT2
VDD
GND VDD
GND
GND VDDIO
SDO
1
SDx
2
SCx
3
INT1
4
VDDIO
5
GND
6
GND
7
VDD 8
INT2 9
OCS 10
OSDO 11
CS 12
SCL 13
SDA 14
ASM330LHH
U1
100nF
C1
100nF
C2
OCS
SDx
P4
OSDO
OSDO
R0R1
R0R2
DNM
R0R3
R0R4
DNM
R0R5
R0R6
DNM
R0R7
R0R8
DNM
P18
P3
P3
P18
P24
P4
P24
P5
P5
P17
P16
P16
P6
P6
1
2
3
4
5
6
7
8
9
10
11
12
JP1
Header 12
24
23
22
21
20
19
18
17
16
15
14
13
JP2
Header 12
STEVAL-MKI193V1
Shematic diagram
DB3687 - Rev 1 page 2/4
Revision history
Table 1. Document revision history
Date Version Changes
03-Apr-2019 1 Initial release.
STEVAL-MKI193V1
DB3687 - Rev 1 page 3/4
IMPORTANT NOTICE – PLEASE READ CAREFULLY
STMicroelectronics NV and its subsidiaries (“ST”) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST
products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST
products are sold pursuant to ST’s terms and conditions of sale in place at the time of order acknowledgement.
Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of
Purchasers’ products.
No license, express or implied, to any intellectual property right is granted by ST herein.
Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product.
ST and the ST logo are trademarks of ST. For additional information about ST trademarks, please refer to www.st.com/trademarks. All other product or service
names are the property of their respective owners.
Information in this document supersedes and replaces information previously supplied in any prior versions of this document.
© 2019 STMicroelectronics – All rights reserved
STEVAL-MKI193V1
DB3687 - Rev 1 page 4/4
