ZTL431/ZTL432 COST EFFECTIVE ADJUSTABLE PRECISION SHUNT REGULATOR Description Pin Assignments The ZTL431 and ZTL432 are three terminal adjustable shunt regulators offering excellent temperature stability and output current handling capability up to 100mA. The output voltage may be set to any chosen voltage between 2.5 and 20 volts by selection of two external divider resistors. (Top View) Cathode 3 1 Anode Ref The devices can be used as a replacement for zener diodes in many applications requiring an improvement in zener performance. 2 SOT23, SOT23F (ZTL431) The ZTL432 has the same electrical specifications as the ZTL431 but has a different pin out in SOT23 (F-suffix) and SOT23F (FF-suffix). (Top View) Ref 3 Both variants are available in two grades with initial tolerances of 1% and 0.5% for the A and B grades, respectively. 1 Anode Cathode 2 These are functionally equivalent to the TL431/TL432 except for maximum operation voltage, and have an ambient temperature range of -40C to +125C as standard. SOT23, SOT23F (ZTL432) (Top View) Features Temperature Range ................ -40C to +125C Reference Voltage Tolerance at +25C 0.5%.......................................B grade 1% .........................................A grade 0.2 Typical Output Impedance Sink Current Capability........ 1mA to 100mA Adjustable Output Voltage......VREF to 20V Totally Lead-Free & Fully RoHS Compliant (Notes 1 & 2) Halogen and Antimony Free. "Green" Device (Note 3) An Automotive-Compliant Part is Available Under Separate Datasheet (ZTL431AQ, ZTL431BQ, ZTL432AQ, ZTL432BQ) Cathode 1 N/C 6 Anode 2 5 N/C Ref 3 4 NC SOT363 Connected internally to substrate; should be left floating or connected to Anode (Top View) Cathode 1 5 N/C Anode 2 Applications Ref 3 Opto-Coupler Linearization Linear Regulators Improved Zener Variable Reference 4 N/C SOT25 (SE5 Package) (Top View) N/C 1 5 Anode N/C* 2 Cathode 3 4 Ref SOT25 (E5 Package) *must be left floating or connected to pin 5 Notes: 1. No purposely added lead. Fully EU Directive 2002/95/EC (RoHS) & 2011/65/EU (RoHS 2) compliant. 2. See http://www.diodes.com/quality/lead_free.html for more information about Diodes Incorporated's definitions of Halogen and Antimony-free, "Green" and Lead-free. 3. Halogen- and Antimony-free "Green" products are defined as those which contain <900ppm bromine, <900ppm chlorine (<1500ppm total Br + Cl) and <1000ppm antimony compounds. ZTL431/ZTL432 Document number: DS33263 Rev. 18 - 2 1 of 12 www.diodes.com August 2017 (c) Diodes Incorporated ZTL431/ZTL432 Absolute Maximum Ratings (Voltages specified are relative to the Anode pin unless otherwise stated.) Parameter Rating Unit Cathode Voltage (VKA) 20 V Continuous Cathode Current (IKA) 150 mA Reference Input Current Range (IREF) Operating Junction Temperature Storage Temperature -50A to +10mA -- -40 to +150 -55 to +150 C C Operation above the absolute maximum rating may cause device failure. Operation at the absolute maximum ratings, for extended periods, may reduce device reliability. Package Thermal Data Package JA PDIS TA = +25C, TJ = +150C SOT23 SOT23F SOT25 SOT363 380C/W 138C/W 250C/W 380C/W 330mW 900mW 500mW 330mW Recommended Operating Conditions (@TA = +25C, unless otherwise specified.) Symbol Parameter Min Max Unit VKA Cathode Voltage VREF 20 V IKA Cathode Current 1 100 mA TA Operating Ambient Temperature Range -40 +125 C Electrical Characteristics (@TA = +25C, unless otherwise specified.) Symbol Parameter VREF Reference Voltage VKA = VREF IKA = 10mA VDEV Deviation of Reference Voltage Over Full Temperature Range VKA = VREF IKA = 10mA VREF VKA Conditions ZTL43_A Min 2.475 Typ 2.5 Max 2.525 ZTL43_B 2.487 2.5 2.513 TA = 0 to +70C -- 6 16 TA = -40 to +85C -- 14 34 TA = -40 to +125C -- 14 34 VKA = VREF to 10V -- -1.4 -2.7 VKA = 10V to 20V -- -1.0 -2.0 -- 2 4 Unit V mV Ratio of Change In Reference Voltage To the Change In Cathode Voltage IKA = 10mA IREF Reference Input Current IKA = 10mA, R1 = 10k, R2 = O/C (Open Circuit) TA = 0 to +70C -- 0.8 1.2 IREF IKA = 10mA R1 = 10k IREF Deviation Over Full Temperature Range R2 = O/C (Open Circuit) TA = -40 to +85C -- 0.8 2.5 TA = -40 to +125C -- 0.8 2.5 Minimum Cathode Current for Regulation VKA = VREF -- -- 0.4 0.6 mA Off State Current VKA = 20V, VREF = 0V -- -- 0.1 0.5 A Dynamic Output Impedance VKA = VREF, f = 0Hz -- -- 0.2 0.5 IKA(MIN) IKA(OFF) RZ ZTL431/ZTL432 Document number: DS33263 Rev. 18 - 2 2 of 12 www.diodes.com mV/V A A August 2017 (c) Diodes Incorporated ZTL431/ZTL432 Typical Characteristics IKA = 10mA Reference Voltage vs. Temperature VREF = VKA Dynamic Impedance vs. Frequency Power Dissipation (mW) 1000 SOT23F 900 800 700 600 SOT25 SOT23-5 500 400 300 SOT23 SOT363 SC70-6 200 100 0 0 25 50 75 100 125 Ambient Temperature (C) Power Dissipation Derating ZTL431/ZTL432 Document number: DS33263 Rev. 18 - 2 3 of 12 www.diodes.com August 2017 (c) Diodes Incorporated ZTL431/ZTL432 Typical Characteristics (Cont.) VKA IKA 60 Gain (dB) 50 40 30 20 10 0 100 1000 10000 100000 1000000 Frequency (Hz) IKA Test Circuit for Open Loop Voltage Gain Gain vs. Frequency VKA VKA Pulse Response Test Circuit for Pulse Response VKA 100 Cathode Current (mA) 90 IKA 80 70 60 50 Stable Stable 40 30 20 10 0 10.0E-12 100.0E-12 1.0E-9 10.0E-9 100.0E-9 1.0E-6 Load Capacitance (F) Stability Boundary Condition ZTL431/ZTL432 Document number: DS33263 Rev. 18 - 2 VV < <VKA < 20V, +25 CC VKA < 20,IKA IKA==10mA, 10mA,TAT= 25 REF REF A= Test Circuit for Stability Boundary Conditions Test Circuit for Stabilty Boundary Conditions 4 of 12 www.diodes.com August 2017 (c) Diodes Incorporated ZTL431/ZTL432 Application Circuits V+ V+ VOUT VOUT R1 R1 VREF VREF R2 R2 VREF VOUT VREF VOUT Higher current shunt regulator Shunt regulator V+ ZSR*** V+ In VOUT Out 30 Common R1 0.01F VREF R1 VOUT R2 VREF R2 VOUT(MIN) = VREF + VREG VREF VOUT VOUT Output control of a three terminal fixed regulator VREF Series regulator V+ R1 R1B V+ R1 R1A Output VREF VON~ 2V VOFF = V+ R2a R2A VREF Output Input VTH = 2.5V R2B R2b VREF VREF Single supply comparator with temperature compensated threshold ZTL431/ZTL432 Document number: DS33263 Rev. 18 - 2 Over voltage / under voltage protection circuit 5 of 12 www.diodes.com August 2017 (c) Diodes Incorporated ZTL431/ZTL432 DC Test Circuits Notes Deviation of reference input voltage, VDEV, is defined as the VMAX maximum variation of the reference input voltage over the full temperature range. The average temperature coefficient of the reference input voltage, VREF is defined as: VREF(ppm/C) = VDEV 1,000,000 VREF(T1-T2) VMIN The dynamic output impedance, Rz, is defined as: VDEV = VMAX - VMIN RZ = VZ IZ When the device is programmed with two external resistors, R1 and R2, (Figure 2), the dynamic output impedance of the overall circuit, R'z, is defined as: R'Z = RZ (1 + R1 ) R2 Stability Boundary The ZTL431 and ZTL432 are stable with a range of capacitive loads. A zone of instability exists as demonstrated in the typical characteristic graph on page 4. The graph shows typical conditions. To ensure reliable stability, a capacitor of 4.7nF or greater is recommended between anode and cathode. ZTL431/ZTL432 Document number: DS33263 Rev. 18 - 2 6 of 12 www.diodes.com August 2017 (c) Diodes Incorporated ZTL431/ZTL432 Ordering Information ZTL43X X X X Pinout Variation 1 : Standard Pin Out 2 : Reversed Pin Out in SOT23/SOT23F Tol. 1% Tolerance Package Packing A : 1.0% B : 0.5% E5/SE5 : SOT25 FF : SOT23F F : SOT23 H6 : SOT363 TA : 7" Tape & Reel Part Number Package Part Mark Status Reel Size Tape Width (mm) Quantity per Reel ZTL431AE5TA SOT25 31A Active 7", 180mm 8 3,000 ZTL431AFFTA SOT23F 31A Active 7", 180mm 8 3,000 ZTL431AFTA SOT23 31A Active 7", 180mm 8 3,000 ZTL431AH6TA SOT363 31A Active 7", 180mm 8 3,000 ZTL431ASE5TA SOT25 S2A Active 7", 180mm 8 3,000 ZTL432AFFTA SOT23F 32A Active 7", 180mm 8 3,000 ZTL432AFTA SOT23 32A Active 7", 180mm 8 3,000 ZTL431BE5TA SOT25 31B Active 7", 180mm 8 3,000 ZTL431BFFTA SOT23F 31B Active 7", 180mm 8 3,000 ZTL431BFTA SOT23 31B Active 7", 180mm 8 3,000 ZTL431BH6TA SOT363 31B Active 7", 180mm 8 3,000 ZTL432BFFTA SOT23F 32B Active 7", 180mm 8 3,000 ZTL432BFTA SOT23 32B Active 7", 180mm 8 3,000 0.5% ZTL431/ZTL432 Document number: DS33263 Rev. 18 - 2 7 of 12 www.diodes.com August 2017 (c) Diodes Incorporated ZTL431/ZTL432 Marking Information (1) SOT23 and SOT23F (Top View) Part Number ZTL431AFFTA ZTL431AFTA ZTL432AFFTA ZTL432AFTA ZTL431BFFTA ZTL431BFTA ZTL432BFFTA ZTL432BFTA Identification Code 31A 31A 32A 32A 31B 31B 32B 32B XXX : Identification Code Part Number ZTL431AE5TA ZTL431ASE5TA ZTL431BE5TA Identification Code 31A S2A 31B XXX : Identification Code Part Number ZTL431AH6TA ZTL431BH6TA Identification Code 31A 31B 1 XXX 3 (2) XXX : Identification Code 2 SOT25 (Top View) 5 4 XXX 1 (3) 2 3 SOT363 (Top View) 6 5 4 XXX 1 2 ZTL431/ZTL432 Document number: DS33263 Rev. 18 - 2 3 8 of 12 www.diodes.com August 2017 (c) Diodes Incorporated ZTL431/ZTL432 Package Outline Dimensions Please see http://www.diodes.com/package-outlines.html for the latest version. (1) Package Type: SOT23 All 7 H K1 GAUGE PLANE 0.25 J K a M A L C L1 B D G F (2) SOT23 Dim Min Max Typ A 0.37 0.51 0.40 B 1.20 1.40 1.30 C 2.30 2.50 2.40 D 0.89 1.03 0.915 F 0.45 0.60 0.535 G 1.78 2.05 1.83 H 2.80 3.00 2.90 J 0.013 0.10 0.05 K 0.890 1.00 0.975 K1 0.903 1.10 1.025 L 0.45 0.61 0.55 L1 0.25 0.55 0.40 M 0.085 0.150 0.110 a 0 8 -All Dimensions in mm Package Type: SOT23F D c b SOT23F Dim Min Max Typ A 0.80 1.00 0.90 A1 0.00 0.10 0.01 b 0.35 0.50 0.44 c 0.10 0.20 0.16 D 2.80 3.00 2.90 e 0.95 REF e1 1.90 REF E 2.30 2.50 2.40 E1 1.50 1.70 1.65 k 1.20 L 0.30 0.65 0.50 L1 0.30 0.50 0.40 R 0.05 0.15 All Dimensions in mm L1 E1 E b e1 A1 e k ZTL431/ZTL432 Document number: DS33263 Rev. 18 - 2 R L A 9 of 12 www.diodes.com August 2017 (c) Diodes Incorporated ZTL431/ZTL432 Package Outline Dimensions (Cont.) Please see http://www.diodes.com/package-outlines.html for the latest version. (3) Package Type: SOT363 E SOT363 Dim Min Max Typ A1 0.00 0.10 0.05 A2 0.90 1.00 1.00 b 0.10 0.30 0.25 c 0.10 0.22 0.11 D 1.80 2.20 2.15 E 2.00 2.20 2.10 E1 1.15 1.35 1.30 e 0.650 BSC F 0.40 0.45 0.425 L 0.25 0.40 0.30 a 0 8 -All Dimensions in mm E1 F b D A2 c (4) L e A1 a Package Type: SOT25 A B C H K J ZTL431/ZTL432 Document number: DS33263 Rev. 18 - 2 M N D L 10 of 12 www.diodes.com SOT25 Dim Min Max Typ A 0.35 0.50 0.38 B 1.50 1.70 1.60 C 2.70 3.00 2.80 D 0.95 H 2.90 3.10 3.00 J 0.013 0.10 0.05 K 1.00 1.30 1.10 L 0.35 0.55 0.40 M 0.10 0.20 0.15 N 0.70 0.80 0.75 0 8 - All Dimensions in mm August 2017 (c) Diodes Incorporated ZTL431/ZTL432 Suggested Pad Layout Please see http://www.diodes.com/package-outlines.html for the latest version. (1) Package Type: SOT23 Y C Y1 X (2) Dimensions C X X1 Y Y1 Value (in mm) 2.0 0.8 1.35 0.9 2.9 X1 Package Type: SOT23F C X Dimensions C X Y Y1 Y1 Value (in mm) 0.95 0.80 1.110 3.000 Y (3) Package Type: SOT363 C Dimensions C G X Y Y1 G Y1 Value (in mm) 0.650 1.300 0.420 0.600 2.500 Y X ZTL431/ZTL432 Document number: DS33263 Rev. 18 - 2 11 of 12 www.diodes.com August 2017 (c) Diodes Incorporated ZTL431/ZTL432 Suggested Pad Layout (Cont.) Please see http://www.diodes.com/package-outlines.html for the latest version. (4) Package Type: SOT25 C2 Z C2 Dimensions Z G X Y C1 C2 C1 G Value 3.20 1.60 0.55 0.80 2.40 0.95 Y X IMPORTANT NOTICE DIODES INCORPORATED MAKES NO WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, WITH REGARDS TO THIS DOCUMENT, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE (AND THEIR EQUIVALENTS UNDER THE LAWS OF ANY JURISDICTION). Diodes Incorporated and its subsidiaries reserve the right to make modifications, enhancements, improvements, corrections or other changes without further notice to this document and any product described herein. Diodes Incorporated does not assume any liability arising out of the application or use of this document or any product described herein; neither does Diodes Incorporated convey any license under its patent or trademark rights, nor the rights of others. Any Customer or user of this document or products described herein in such applications shall assume all risks of such use and will agree to hold Diodes Incorporated and all the companies whose products are represented on Diodes Incorporated website, harmless against all damages. Diodes Incorporated does not warrant or accept any liability whatsoever in respect of any products purchased through unauthorized sales channel. Should Customers purchase or use Diodes Incorporated products for any unintended or unauthorized application, Customers shall indemnify and hold Diodes Incorporated and its representatives harmless against all claims, damages, expenses, and attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized application. Products described herein may be covered by one or more United States, international or foreign patents pending. Product names and markings noted herein may also be covered by one or more United States, international or foreign trademarks. This document is written in English but may be translated into multiple languages for reference. Only the English version of this document is the final and determinative format released by Diodes Incorporated. LIFE SUPPORT Diodes Incorporated products are specifically not authorized for use as critical components in life support devices or systems without the express written approval of the Chief Executive Officer of Diodes Incorporated. As used herein: A. Life support devices or systems are devices or systems which: 1. are intended to implant into the body, or 2. support or sustain life and whose failure to perform when properly used in accordance with instructions for use provided in the labeling can be reasonably expected to result in significant injury to the user. B. A critical component is any component in a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or to affect its safety or effectiveness. Customers represent that they have all necessary expertise in the safety and regulatory ramifications of their life support devices or systems, and acknowledge and agree that they are solely responsible for all legal, regulatory and safety-related requirements concerning their products and any use of Diodes Incorporated products in such safety-critical, life support devices or systems, notwithstanding any devices- or systems-related information or support that may be provided by Diodes Incorporated. Further, Customers must fully indemnify Diodes Incorporated and its representatives against any damages arising out of the use of Diodes Incorporated products in such safety-critical, life support devices or systems. Copyright (c) 2017, Diodes Incorporated www.diodes.com ZTL431/ZTL432 Document number: DS33263 Rev. 18 - 2 12 of 12 www.diodes.com August 2017 (c) Diodes Incorporated