APT10045JFLL 1000V 21A 0.450W POWER MOS 7TM FREDFET * Lower Input Capacitance * Lower Miller Capacitance * Lower Gate Charge, Qg Symbol VDSS ID 27 2 T- D G SO "UL Recognized" ISOTOP (R) * Increased Power Dissipation * Easier To Drive * Popular SOT-227 Package * FAST RECOVERY BODY DIODE MAXIMUM RATINGS S S Power MOS 7TM is a new generation of low loss, high voltage, N-Channel enhancement mode power MOSFETS. Both conduction and switching losses are addressed with Power MOS 7TM by significantly lowering RDS(ON) and Qg. Power MOS 7TM combines lower conduction and switching losses along with exceptionally fast switching speeds inherent with APT's patented metal gate structure. D G S All Ratings: TC = 25C unless otherwise specified. APT10045JFLL Parameter UNIT L A C I N H C N E T O I E T C MA N A OR V AD INF 1000 Drain-Source Voltage Volts 21 Continuous Drain Current @ TC = 25C 1 Amps IDM Pulsed Drain Current VGS Gate-Source Voltage Continuous 30 Gate-Source Voltage Transient 40 Total Power Dissipation @ TC = 25C 460 Watts Linear Derating Factor 3.68 W/C VGSM PD TJ,TSTG 84 Lead Temperature: 0.063" from Case for 10 Sec. IAR Avalanche Current EAR Repetitive Avalanche Energy EAS -55 to 150 Operating and Storage Junction Temperature Range TL 1 C 300 21 (Repetitive and Non-Repetitive) 1 Single Pulse Avalanche Energy Volts Amps 50 4 mJ 2500 STATIC ELECTRICAL CHARACTERISTICS BVDSS ID(on) RDS(on) IDSS IGSS VGS(th) Characteristic / Test Conditions MIN Drain-Source Breakdown Voltage (VGS = 0V, I D = 250A) 1000 Volts 21 Amps On State Drain Current 2 (VDS > I D(on) x R DS(on) Max, VGS = 10V) Drain-Source On-State Resistance 2 (VGS = 10V, 0.5 ID[Cont.]) TYP MAX 0.450 Zero Gate Voltage Drain Current (VDS = VDSS, VGS = 0V) 250 UNIT Ohms A Zero Gate Voltage Drain Current (VDS = 0.8 VDSS, VGS = 0V, TC = 125C) 1000 Gate-Source Leakage Current (VGS = 30V, VDS = 0V) 100 nA 5 Volts Gate Threshold Voltage (VDS = VGS, ID = 2.5mA) 3 CAUTION: These Devices are Sensitive to Electrostatic Discharge. Proper Handling Procedures Should Be Followed. APT Website - http://www.advancedpower.com USA 405 S.W. Columbia Street Bend, Oregon 97702-1035 Phone: (541) 382-8028 FAX: (541) 388-0364 EUROPE Chemin de Magret F-33700 Merignac - France Phone: (33) 5 57 92 15 15 FAX: (33) 5 56 47 97 61 050-7038 Rev - 8-2001 Symbol APT10045JFLL DYNAMIC CHARACTERISTICS Symbol Test Conditions Characteristic MIN TYP Ciss Input Capacitance VGS = 0V 4410 Coss Output Capacitance VDS = 25V 730 Crss Reverse Transfer Capacitance f = 1 MHz 145 VGS = 10V 169 VDD = 0.5 VDSS ID = ID [Cont.] @ 25C 26 112 VGS = 15V 13 VDD = 0.5 VDSS 6 ID = ID [Cont.] @ 25C 28 RG = 0.6W 5 Qg Total Gate Charge 3 L A C I N H C N E T IO E T C MA N A OR V AD INF Qgs Gate-Source Charge Qgd Gate-Drain ("Miller") Charge t d(on) tr t d(off) tf Turn-on Delay Time Rise Time Turn-off Delay Time Fall Time MAX UNIT pF nC ns SOURCE-DRAIN DIODE RATINGS AND CHARACTERISTICS Symbol IS Characteristic / Test Conditions MIN TYP Continuous Source Current (Body Diode) ISM Pulsed Source Current 1 VSD Diode Forward Voltage 2 dv/ dt Peak Diode Recovery dv/dt (Body Diode) MAX 21 84 UNIT Amps (VGS = 0V, IS = -ID [Cont.]) 1.3 Volts 5 18 V/ns t rr Reverse Recovery Time (IS = -ID [Cont.], di/dt = 100A/s) Tj = 25C 300 Tj = 125C 600 Q rr Reverse Recovery Charge (IS = -ID [Cont.], di/dt = 100A/s) Tj = 25C 1.7 Tj = 125C 4.8 IRRM Peak Recovery Current (IS = -ID [Cont.], di/dt = 100A/s) Tj = 25C 12 Tj = 125C 19 ns C Amps THERMAL CHARACTERISTICS Symbol Characteristic RqJC Junction to Case RqJA Junction to Ambient MIN TYP MAX UNIT 0.27 40 1 Repetitive Rating: Pulse width limited by maximum junction C/W 3 See MIL-STD-750 Method 3471 4 Starting T = +25C, L = 11.34mH, R = 25W, Peak I = 21A j G L 5 dv/ numbers reflect the limitations of the test circuit rather than the dt device itself. IS -ID[Cont.] di/dt 700A/s VR VDSS TJ 150C APT Reserves the right to change, without notice, the specifications and information contained herein. temperature. 2 Pulse Test: Pulse width < 380 s, Duty Cycle < 2% SOT-227 (ISOTOP(R)) Package Outline 11.8 (.463) 12.2 (.480) 31.5 (1.240) 31.7 (1.248) 7.8 (.307) 8.2 (.322) r = 4.0 (.157) (2 places) 25.2 (0.992) 0.75 (.030) 12.6 (.496) 25.4 (1.000) 0.85 (.033) 12.8 (.504) 4.0 (.157) 4.2 (.165) (2 places) 1.95 (.077) 2.14 (.084) 3.3 (.129) 3.6 (.143) 050-7038 Rev - 8-2001 8.9 (.350) 9.6 (.378) Hex Nut M4 (4 places) W=4.1 (.161) W=4.3 (.169) H=4.8 (.187) H=4.9 (.193) (4 places) 14.9 (.587) 15.1 (.594) * Source Drain 30.1 (1.185) 30.3 (1.193) * Source terminals are shorted internally. Current handling capability is equal for either Source terminal. 38.0 (1.496) 38.2 (1.504) * Source Gate Dimensions in Millimeters and (Inches) APT's devices are covered by one or more of the following U.S.patents: 4,895,810 5,256,583 5,045,903 4,748,103 5,089,434 5,283,202 5,182,234 5,231,474 5,019,522 5,434,095 5,262,336 5,528,058