EG01C
ULTRA FAST RECOVERY
RECTIFIER DIODE
PRV : 1000 Volts
Io : 0.5 Ampere
FEATURES :
* High current capability
* High surge current capability
* High reliability
* Low reverse current
* Low forward voltage drop
* Fast switching for high efficiency
MECHANICAL DATA :
* Case : DO-41 Molded plastic
* Epoxy : UL94V-O rate flame retardant
* Lead : Axial lead solderable per MIL-STD-202,
Method 208 guaranteed
* Polarity : Color band denotes cathode end
* Mounting position : Any
* Weight : 0.34 gram
MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS
Rating at 25
°
C ambient temperature unless otherwise specified.
Single phase, half wave, 60 Hz, resistive or inductive load.
For capacitive load, derate current by 20%.
SYMBOL EG01C UNIT
Maximum Peak Reverse Voltage VRM 1000 V
Maximum Peak Reverse Surge Voltage VRSM 1000 V
Maximum Average Rectified Forward Current (Note1) IF(AV) 0.5 A
Maximum Peak Forward Surge Current
( 50 Hz, Half-cycle, Sine wave, Single Shot ) IFSM 10 A
Maximum Forward Voltage at IF = 0.5 A VF3.3 V
Maximum Forward Current IF0.5 A
Maximum Reverse Current at Reverse voltage IR0.05 mA
Maximum Reverse Current at Reverse voltage Ta = 100 °CIR(H) 0.5 mA
Maximum Reverse Recovery Time ( Note 2 ) Trr 100 ns
Junction Temperature Range TJ - 40 to + 150 °C
Storage Temperature Range TSTG - 40 to + 150 °C
Notes :
( 1 ) Lead Length 15 mm.
( 2 ) Reverse Recovery Test Conditions : IF = 100 mA, IRP = 100 mA.
Page 1 of 2 Rev. 02 : March 25, 2005
RATING
DO - 41
Dimensions in inches and ( millimeters )
1.00 (25.4)
MIN.
0.107 (2.7)
0.080 (2.0)
0.205 (5.2)
0.166 (4.2)
1.00 (25.4)
MIN.
0.034 (0.86)
0.028 (0.71)
* Pb / RoHS Free
www.eicsemi.com
RATING AND CHARACTERISTIC CURVES ( EG01C )
FIG.1 - REVERSE RECOVERY TIME CHARACTERISTIC AND TEST CIRCUIT DIAGRAM
FIG.2 - DERATING CURVE FOR OUTPUT FIG.3 - MAXIMUM NON-REPETITIVE PEAK
RECTIFIED CURRENT FORWARD SURGE CURRENT
0 25 50 75 100 125 150 175
1
2 4 6 10 20 40 60 100
AMBIENT TEMPERATURE, ( °C) NUMBER OF CYCLES AT 50Hz
FIG.4 - TYPICAL FORWARD CHARACTERISTICS FIG.5 - TYPICAL REVERSE CHARACTERISTICS
01.0 2.0 3.0 4.0 5.0 6.0 7.0
Page 2 of 2 Rev. 02 : March 25, 2005
Ta = 25 °C
0.8
0.6
0.4
0.2
1.0
10 10
1.0
8
0
10
0
6
4
2
1.0
80
0.01
0.1 0.1
100 1400 20 40 60 120
PERCENT OF RATED REVERSE
VOLTAGE, (%)
PEAK FORWARD SURGE
CURRENT, AMPERES
AVERAGE FORWARD OUTPUT
CURRENT, AMPERES
FORWARD CURRENT, AMPERES
INSTANTANEOUS REVERSE
CURRENT, MICROAMPERES
TJ = 25 °C
TJ = 100 °C
20µS
200µS
FORWARD VOLTAGE, VOLTS
Trr
0.1 IRP
100 mA
IF
100 mA
IRP
0.001
0.01
NOTE : IF = IRP = 100 mA TO 10 mA
10
Ω
100 µFspecimen
www.eicsemi.com
