SPECIFICATION * Supplier : Samsung electro-mechanics * Samsung P/N: CL05X105KQ5NNNC * Product : Multi-layer Ceramic Capacitor * Description : CAP, 1, 6.3V, 10%, X6S, 0402 A. Samsung Part Number Series Size Dielectric Capacitance Capacitance CL 05 X 105 K Q 5 N N N C Samsung Multi-layer Ceramic Capacitor 0402 (inch code) L: 1.0 0.05 X6S 0.5 W: 0.05 mm Inner electrode Ni Termination Cu Plating Sn 100% 1 10 % tolerance mm Product Normal (Pb Free) Rated Voltage 6.3 V Special Reserved for future use Thickness 0.5 0.05 mm Packaging Cardboard Type, 7" reel B. Samsung Reliablility Test and Judgement condition Judgement 1.00.2Vrms Rated Voltage 60~120 sec. Resistance 10,000Mohm or 100Mohm Whichever is Smaller Appearance No abnormal exterior appearance Withstanding No dielectric breakdown or Microscope (x10) 250% of the rated voltage Voltage mechanical breakdown Temperature X6S Characterisitcs Adhesive Strength (From -55 to 105, Capacitance change shoud be within 22%) No peeling shall be occur on the 500g*F, for 101 sec. of Termination terminal electrode Bending Strength Capacitance change : Tan (DF) Insulation Within specified tolerance Test condition 110% Capacitance 0.1 max. within 12.5% Bending to the limit (1mm) with 1.0mm/sec. Solderability More than 75% of terminal surface 1) Sn63Pb37 solder is to be soldered newly 2355, 50.5sec. 2) SnAg3.0Cu0.5 solder 2455, 30.3sec. (preheating : 80~120 for 10~30sec.) Resistance to Capacitance change : Soldering heat Tan , IR : initial spec. within 15% Solder pot : 2705, 101sec. Judgement Vibration Test Capacitance change : within 10% Tan , IR : initial spec. Moisture Capacitance change : Resistance Tan : 0.125 max IR : Test condition Amplitude : 1.5mm From 10 to 55 (return : 1min.) 2hours x 3 direction (x, y, z) within 12.5% With rated voltage 402, 90~95%RH, 500+12/-0hrs 12.5* or Over within 12.5% With 100% High Temperature Capacitance change : Resistance Tan : 0.125 max Max. operating temperature IR : 1000+48/-0hrs 25* or Over Temperature Capacitance change : Cycling Tan , IR : initial spec. within 15% of the rated voltage 1 cycle condition Min. operating temperature 25 Max. operating temperature 25 5 cycle test C. Recommended Soldering method : Reflow ( Reflow Peak Temperature : 260+0/-5, 10sec. Max ) * For the more detail Specification, Please refer to the Samsung MLCC catalogue.