Type DSF Polyester Capacitors Stacked Metallized Radial Leads Subminiature Size Type DSF film capacitors are made with stacked metallized polyester, resulting in high volumetric efficiency and a very economical solution for general purpose DC applications. Ideally suited for blocking, by-pass, coupling, decoupling, and filtering circuits. Specifically designed for applications where high density insertion of components is required. Ammo box style or reel taping available. Specifications Pulse Capability Body Length (mm) 7.3, 7.5 E 10.2 dV/dt volts per microsecond, max. 50 32 - 37 100 55 1.0 20 min Rated Volts 12 43 S0.8 BS O Ratings and Dimensions Catalog Part Number 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.100 0.120 0.150 0.180 0.220 0.270 0.330 0.390 0.470 0.560 0.680 0.820 1.000 DSF050J103 DSF050J123 DSF050J153 DSF050J183 DSF050J223 DSF050J273 DSF050J333 DSF050J393 DSF050J473 DSF050J563 DSF050J683 DSF050J823 DSF050J104 DSF050J124 DSF050J154 DSF050J184 DSF050J224 DSF050J274 DSF050J334 DSF050J394 DSF050J474 DSF050J564 DSF050J684 DSF050J824 DSF050J105 T H Inches(mm) Inches(mm) 50 Vdc 0.126 (3.2) 0.197 (5.0) 0.126 (3.2) 0.197 (5.0) 0.126 (3.2) 0.197 (5.0) 0.126 (3.2) 0.197 (5.0) 0.126 (3.2) 0.197 (5.0) 0.126 (3.2) 0.197 (5.0) 0.126 (3.2) 0.197 (5.0) 0.126 (3.2) 0.197 (5.0) 0.126 (3.2) 0.197 (5.0) 0.126 (3.2) 0.197 (5.0) 0.126 (3.2) 0.197 (5.0) 0.142 (3.6) 0.197 (5.0) 0.157 (4.0) 0.197 (5.0) 0.157 (4.0) 0.197 (5.0) 0.173 (4.4) 0.217 (5.5) 0.177 (4.5) 0.217 (5.5) 0.189 (4.8) 0.217 (5.5) 0.181 (4.6) 0.276 (7.0) 0.205 (5.2) 0.276 (7.0) 0.224 (5.7) 0.287 (7.3) 0.236 (6.0) 0.287 (7.3) 0.228 (5.8) 0.394 (10.0) 0.256 (6.5) 0.394 (10.0) 0.268 (6.8) 0.394 (10.0) 0.315 (8.0) 0.433 (11.0) O Cap. (F ) T max L max H max Full C-Derate linearly 50% - rated voltage at 105C Fullrated ratedvoltage voltageatat85 85C-Derate linearlytoto 50% - rated voltage at 125C Dielectric Strength: Rated Vdc x 150 %, 60 sec. Dissipation Factor: 1% max (25C, 1 kHz) Insulation Resistance: C0.33F : 3000M min. C>0.33F : 1000M.F min. Life Test: 1000 h @ 85 C, 125% rated voltage LE T Voltage Range: 50-100 Vdc (63 Vdc Optional) Capacitance Range: .010-2.2 F Capacitance Tolerance: 5% (J) standard Operating Temperature Range: -40 to + 85C L Inches(mm) S Inches(mm) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.287 (7.3) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) Lead Spacing L S <10 5.0 10 7.5 0.5 .05mm RoHS Compliant Cap. (F ) 1.200 1.500 1.800 2.200 Catalog Part Number DSF050J125 DSF050J155 DSF050J185 DSF050J225 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.100 0.120 0.150 0.180 0.220 0.270 0.330 0.390 0.470 DSF100J103 DSF100J123 DSF100J153 DSF100J183 DSF100J223 DSF100J273 DSF100J333 DSF100J393 DSF100J473 DSF100J563 DSF100J683 DSF100J823 DSF100J104 DSF100J124 DSF100J154 DSF100J184 DSF100J224 DSF100J274 DSF100J334 DSF100J394 DSF100J474 T H Inches(mm) In. (mm) 0.256 (6.5) 0.394 (10.0) 0.283 (7.2) 0.394 (10.0) 0.283 (7.2) 0.472 (12.0) 0.311 (7.9) 0.472 (12.0) 100 Vdc 0.126 (3.2) 0.276 (7.0) 0.126 (3.2) 0.276 (7.0) 0.126 (3.2) 0.276 (7.0) 0.126 (3.2) 0.276 (7.0) 0.126 (3.2) 0.276 (7.0) 0.126 (3.2) 0.276 (7.0) 0.126 (3.2) 0.276 (7.0) 0.126 (3.2) 0.276 (7.0) 0.126 (3.2) 0.276 (7.0) 0.126 (3.2) 0.276 (7.0) 0.157 (4.0) 0.276 (7.0) 0.161 (4.1) 0.276 (7.0) 0.177 (4.5) 0.276 (7.0) 0.130 (3.3) 0.354 (9.0) 0.130 (3.3) 0.354 (9.0) 0.142 (3.6) 0.354 (9.0) 0.157 (4.0) 0.354 (9.0) 0.165 (4.2) 0.354 (9.0) 0.189 (4.8) 0.394 (10.0) 0.217 (5.5) 0.394 (10.0) 0.268 (6.8) 0.413 (10.5) L Inches(mm) 0.402 (10.2) 0.402 (10.2) 0.402 (10.2) 0.402 (10.2) S Inches(mm) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.402 (10.2) 0.402 (10.2) 0.402 (10.2) 0.402 (10.2) 0.402 (10.2) 0.402 (10.2) 0.402 (10.2) 0.402 (10.2) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.197 (5.0) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) 0.295 (7.5) CDE Cornell Dubilier*1605 E. Rodney French Blvd.*New Bedford, MA 02744*Ph: (508)996-8561*Fax: (508)996-3830* www.cde.com Type DSF Polyester Capacitors DSF 050 J Dipped Stacked Film Type Voltage Code 223 Capacitance Tolerance J = 5% 050 = 50 Vdc 100 = 100 Vdc C Nominal Capacitance Bulk and Ammo Packaging Options (First two digits are significant figures. Last digit is multiplier to give cap in pF) Tape & Reel packaging available. Contact us for detailed specs. E e.g. 223 = 22 X 103 pF = .022 F 104 = 10 X 104 pF = .100 F 155 = 15 X 105 pF = 1.50 F Blank = Straight lead, Bulk C = Crimped, Bulk CA = Crimped Lead, Ammo Pack TA = Straight Lead, Ammo Pack LE T Ammo Pack Options BS O Crimped Lead Ammo Pack Option (CA) PACKAGE QUANTITY FOR AMMO PACK CRIMPED LEAD OPTION (CA) & (CR) WVDC Capacitance Range Quantity 50 100 0.01 - 0.12 2000 0.15 - 2.2 1000 0.01 - 0.068 2000 0.082 - 0.1 1000 0.12 - 0.22 2000 0.27 - 0.47 1000 Bulk Cut & Crimp Styles O Crimp style depends on capacitor length. L 10.0 mm WVDC H3 max. (mm) 50 H+4.5 100 H+5.0 L >10.0 mm Straight Lead Ammo Pack Option (TA) PACKAGE QUANTITY FOR AMMO PACK STRAIGHT LEAD OPTION (TA) & (TR) WVDC Capacitance Range Quantity 50 0.01 - 0.12 0.15 to 1.0 2000 1000 100 0.01 - 0.068 0.082 - 0.1 2000 1000 AMMO PACK TAPING SPECIFICATIONS Dimensions Dimensions for Crimped for Straight Option (CA) Lead Option (TA) Lead Spacing (F) 5.0 5.0 Capacitor Pitch (P) 12.7 12.7 Feed Hole Pitch(Po) 12.7 12.7 Carrier Width (W) 18.0 18.0 Feed Hole Position (W1) Height of Seating Plane(H1) Lead Wire Clinch Height (Ho) Feed Hole Diameter (Do) Case Top to Feed Hole (H2) Max. Tol. (mm) +.8/-.2 .1 .2 .5 9.0 9.0 .5 20.0 20.0 .5 16.0 --- .5 4.0 4.0 .2 20.5 + Hmax 20.5 + Hmax Max. CDE Cornell Dubilier*1605 E. Rodney French Blvd.*New Bedford, MA 02744*Ph: (508)996-8561*Fax: (508)996-3830* www.cde.com O BS O AC LE T E Notice and Disclaimer: All product drawings, descriptions, specifications, statements, information and data (collectively, the "Information") in this datasheet or other publication are subject to change. The customer is responsible for checking, confirming and verifying the extent to which the Information contained in this datasheet or other publication is applicable to an order at the time the order is placed. All Information given herein is believed to be accurate and reliable, but it is presented without any guarantee, warranty, representation or responsibility of any kind, expressed or implied. Statements of suitability for certain applications are based on the knowledge that the Cornell Dubilier company providing such statements ("Cornell Dubilier") has of operating conditions that such Cornell Dubilier company regards as typical for such applications, but are not intended to constitute any guarantee, warranty or representation regarding any such matter - and Cornell Dubilier specifically and expressly disclaims any guarantee, warranty or representation concerning the suitability for a specific customer application, use, storage, transportation, or operating environment. The Information is intended for use only by customers who have the requisite experience and capability to determine the correct products for their application. Any technical advice inferred from this Information or otherwise provided by Cornell Dubilier with reference to the use of any Cornell Dubilier products is given gratis (unless otherwise specified by Cornell Dubilier), and Cornell Dubilier assumes no obligation or liability for the advice given or results obtained. Although Cornell Dubilier strives to apply the most stringent quality and safety standards regarding the design and manufacturing of its products, in light of the current state of the art, isolated component failures may still occur. Accordingly, customer applications which require a high degree of reliability or safety should employ suitable designs or other safeguards (such as installation of protective circuitry or redundancies or other appropriate protective measures) in order to ensure that the failure of an electrical component does not result in a risk of personal injury or property damage. Although all product-related warnings, cautions and notes must be observed, the customer should not assume that all safety measures are indicated in such warnings, cautions and notes, or that other safety measures may not be required. 4