19-2606; Rev 3; 11/06 High-Supply-Voltage, Precision Voltage Reference in SOT23 The MAX6035 is a high-voltage, precision micropower voltage reference. This three-terminal device is available with output voltage options of 2.5V, 3.0V, and 5.0V. It is an excellent upgrade for industry-standard devices such as the REF02 and REF43. The MAX6035 offers 14x lower power than the REF02 and 5x lower power than the REF43, as well as a reduced package size from an 8-pin SO to a 3-pin SOT23. The MAX6035 features a proprietary temperature coefficient curvature-correction circuit and laser-trimmed, thin-film resistors that result in a very low temperature coefficient of 25ppm/C (max) and an initial accuracy of 0.2% (max). The MAX6035 typically draws only 73A of supply current and can source 10mA or sink 2mA of load current. Unlike conventional shunt-mode (two-terminal) references that waste supply current and require an external resistor, this device offers a supply current that is virtually independent of the supply voltage and does not require an external resistor. Additionally, this internally compensated device does not require an external compensation capacitor, but is also stable with capacitive loads up to 5F. Eliminating the external compensation capacitor saves valuable board area in space-critical applications. The supply independent, ultra-low supply current makes this device ideal for battery-operated, high-performance systems. The MAX6035 is available in a 3-pin SOT23 package and is specified for operation from -40C to +125C. Features Wide Supply Voltage Range: Up to 33V 25ppm/C (max) Temperature Coefficient (-40C to +85C) 0.2% (max) Initial Accuracy 95A (max) Quiescent Supply Current 10mA Source Current, 2mA Sink Current No Output Capacitor Required Stable with Capacitive Loads up to 5F Ordering Information Digital Multimeters Portable Data-Acquisition Systems Low-Power Test Equipment Typical Operating Circuit TOP MARK TEMP RANGE MAX6035AAUR25-T -40C to +125C 3 SOT23-3 FZMW MAX6035BAUR25-T -40C to +125C 3 SOT23-3 FZMX MAX6035ESA25 -40C to +85C 8 SO MAX6035AAUR30-T -40C to +125C 3 SOT23-3 FZMY MAX6035BAUR30-T -40C to +125C 3 SOT23-3 FZMZ MAX6035AAUR50-T -40C to +125C 3 SOT23-3 FZNA MAX6035BAUR50-T -40C to +125C 3 SOT23-3 FZNB -- Note: The 3-pin SOT23 package code is U3-1. The 8-pin SO package code is S8-2. Selector Guide MAXIMUM MAXIMUM OUTPUT INITIAL TEMPCO VOLTAGE ACCURACY (ppm/C) (V) (%) (-40C to +85C) PART Applications 4mA to 20mA Industrial Control Loops Li+ Battery Chargers 12-Bit A/D and D/A Converters PINPACKAGE PART MAX6035AAUR25 25 0.20 2.5 MAX6035BAUR25 65 0.50 2.5 MAX6035ESA25 40 0.20 2.5 MAX6035AAUR30 25 0.20 3.0 MAX6035BAUR30 65 0.50 3.0 MAX6035AAUR50 25 0.20 5.0 MAX6035BAUR50 65 0.50 5.0 Pin Configurations +SUPPLY INPUT (SEE SELECTOR GUIDE) TOP VIEW IN OUT REFERENCE OUT N.C. 1 IN 1 8 N.C. 7 N.C. 3 6 OUT GND 4 5 N.C. IN 0.1F* MAX6035 MAX6035 3 MAX6035 N.C. GND *CAPACITOR IS OPTIONAL. 2 GND OUT 2 SOT23 SO ________________________________________________________________ Maxim Integrated Products For pricing, delivery, and ordering information, please contact Maxim/Dallas Direct! at 1-888-629-4642, or visit Maxim's website at www.maxim-ic.com. 1 MAX6035 General Description MAX6035 High-Supply-Voltage, Precision Voltage Reference in SOT23 ABSOLUTE MAXIMUM RATINGS (Voltages referenced to GND) IN ............................................................................-0.3V to +36V OUT .............................................................-0.3V to (VIN + 0.3V) OUT Short-Circuit Duration to GND or IN (Note 1).....Continuous Current into Any Pin..........................................................20mA Continuous Power Dissipation 3-Pin SOT23 (derate 4.0mW/C above +70C)............320mW 8-Pin SO (derate 5.9mW/C above +70C)...............470.6mW Operating Temperature Range: MAX6035ESA ..................................................-40C to +85C MAX6035_AUR ..............................................-40C to +125C Storage Temperature Range .............................-65C to +150C Junction Temperature ......................................................+150C Lead Temperature (soldering, 10s) .................................+300C Note 1: Continuous power dissipation should also be observed. Stresses beyond those listed under "Absolute Maximum Ratings" may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. ELECTRICAL CHARACTERISTICS--MAX6035_AUR25 and MAX6035ESA25 (2.5V) (VIN = 5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 2) PARAMETER Output Voltage SYMBOL VOUT CONDITIONS TA = +25C TA = 0C to +70C Output Voltage Temperature Coefficient (Notes 3 and 6) TCVOUT TA = -40C to +85C TA = -40C to +125C Line Regulation (Note 4) VOUT/VIN (VOUT + 2V) VIN 33V TA = +25C, MAX6035_AUR TA = TMIN to TMAX, MAX6035_AUR Load Regulation (Note 4) VOUT/ IOUT TA = +25C, MAX6035ESA TA = TMIN to TMAX, MAX6035ESA OUT Short-Circuit Current 2 ISC MIN TYP MAX MAX6035AAUR, MAX6035ESA (0.2%) 2.4950 2.5000 2.5050 MAX6035BAUR 2.4875 2.5000 2.5125 MAX6035AAUR 20 MAX6035BAUR 50 MAX6035AAUR 25 MAX6035ESA 40 MAX6035BAUR 65 MAX6035AAUR 30 MAX6035BAUR TA = +25C UNITS V ppm/C 75 4 TA = TMIN to TMAX 15 20 Sourcing: 0 IOUT 10mA 25 70 Sinking: -2mA IOUT 0 45 180 Sourcing: 0 IOUT 10mA 85 Sinking: -2mA IOUT 0 225 V/V V/mA Sourcing: 0 IOUT 10mA 105 175 Sinking: -2mA IOUT 0 205 375 Sourcing: 0 IOUT 10mA 350 Sinking: -2mA IOUT 0 500 Short to GND 27 Short to IN -4 _______________________________________________________________________________________ mA High-Supply-Voltage, Precision Voltage Reference in SOT23 (VIN = 5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 2) PARAMETER SYMBOL CONDITIONS MIN TYP MAX IOUT = 10A 1.9 IOUT = 10mA 2.25 Dropout Voltage (Note 7) VIN - VOUT Thermal Hysteresis (Note 5) VOUT/cycle 135 Long-Term Stability VOUT/time 1000hr at +25C 110 UNITS V ppm ppm/ 1000hr DYNAMIC CHARACTERISTICS Output Noise Voltage en f = 0.1Hz to 10Hz 21 VP-P f = 10Hz to 1kHz 20 VRMS 86 dB VOUT/VIN VIN = 5V 100mV, f = 120Hz Ripple Rejection Turn-On Settling Time Capacitive-Load Stability (Note 6) tR To VOUT = 0.1% of final value COUT = 50pF 35 COUT = 1F 240 0 COUT s 5 F INPUT CHARACTERISTICS Supply Voltage Range VIN Quiescent Supply Current IIN Change in Supply Current IIN/VIN Inferred from line regulation and dropout voltage 4.4 4.4V VIN 33V 33 V 73 95 A 0.4 0.7 A/V UNITS ELECTRICAL CHARACTERISTICS--MAX6035_AUR30 (3.0V) (VIN = 5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 2) PARAMETER Output Voltage SYMBOL VOUT CONDITIONS TA = +25C TA = 0C to +70C Output Voltage Temperature Coefficient (Note 3) TCVOUT TA = -40C to +85C TA = -40C to +125C Line Regulation (Note 4) VOUT/ VIN (VOUT + 1.75V) VIN 33V (VOUT + 2V) VIN 33V TA = +25C Load Regulation (Note 4) VOUT/ IOUT TA = -40C to +125C MIN TYP MAX MAX6035A (0.2%) 2.9940 3.0000 3.0060 MAX6035B (0.5%) 2.9850 3.0000 3.0150 MAX6035A 20 MAX6035B 50 MAX6035A 25 MAX6035B 65 MAX6035A 30 MAX6035B TA = +25C V ppm/C 75 4.5 15 TA = 0C to +125C 24 TA = -40C to +125C 24 Sourcing: 0 IOUT 10mA 30 81 Sinking: -2mA IOUT 0mA 54 170 V/V V/mA Sourcing: 0 IOUT 10mA 96 Sinking: -2mA IOUT 0mA 230 _______________________________________________________________________________________ 3 MAX6035 ELECTRICAL CHARACTERISTICS--MAX6035_AUR25 and MAX6035ESA25 (2.5V) (continued) MAX6035 High-Supply-Voltage, Precision Voltage Reference in SOT23 ELECTRICAL CHARACTERISTICS--MAX6035_AUR30 (3.0V) (continued) (VIN = 5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 2) PARAMETER SYMBOL OUT Short-Circuit Current ISC Dropout Voltage (Note 7) VIN - VOUT CONDITIONS MIN TYP Short to GND 27 Short to IN -4 TA = 0C to +125C IOUT = 10A TA = -40C to +125C MAX UNITS mA 1.75 IOUT = 10A 1.9 IOUT = 10mA 2.25 V Thermal Hysteresis (Note 5) VOUT/cycle 135 ppm Long-Term Stability VOUT/time 1000hr at +25C 120 ppm/ 1000hr f = 0.1Hz to 10Hz 25 VP-P f = 10Hz to 1kHz 25 VRMS VIN = 5V 100mV, f = 120Hz 80 dB DYNAMIC CHARACTERISTICS Output Noise Voltage Ripple Rejection Turn-On Settling Time Capacitive-Load Stability (Note 6) en VOUT/ VIN tR VOUT = 0.1% of final value COUT = 50pF 40 COUT = 1F 250 COUT s 0 5 4.75 33 F INPUT CHARACTERISTICS TA = 0C to +125C, inferred from line regulation and dropout voltage Supply Voltage Range VIN Quiescent Current Supply IIN Change in Supply Current IIN/VIN V TA = -40C to +125C, inferred from line regulation and dropout voltage 4.9 33 4.9V VIN 33V 73 95 A 0.4 0.7 A/V ELECTRICAL CHARACTERISTICS--MAX6035_AUR50 (5.0V) (VIN = 5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 2) PARAMETER Output Voltage SYMBOL VOUT CONDITIONS TA = +25C TA = 0C to +70C Output Voltage Temperature Coefficient (Note 3) TCVOUT TA = -40C to +85C TA = -40C to +125C Line Regulation (Note 4) 4 VOUT/VIN (VOUT + 2V) VOUT 33V MIN TYP MAX MAX6035A (0.2%) 4.9900 5.0000 5.0100 MAX6035B (0.5%) 4.9750 5.0000 5.0250 MAX6035A 20 MAX6035B 50 MAX6035A 25 MAX6035B 65 MAX6035A 30 MAX6035B TA = +25C TA = -40C to +125C UNITS V ppm/C 75 7.5 25 8 40 _______________________________________________________________________________________ V/V High-Supply-Voltage, Precision Voltage Reference in SOT23 MAX6035 ELECTRICAL CHARACTERISTICS--MAX6035_AUR50 (5.0V) (continued) (VIN = 5V, IOUT = 0, TA = TMIN to TMAX, unless otherwise noted. Typical values are at TA = +25C.) (Note 2) PARAMETER SYMBOL CONDITIONS TA = +25C VOUT/ IOUT Load Regulation (Note 4) TA = -40C to +125C MIN TYP MAX Sourcing: 0 IOUT 10mA 50 135 Sinking: -2mA IOUT 0mA 90 215 UNITS V/mA Sourcing: 0 IOUT 10mA 160 Sinking: -2mA IOUT 0mA 300 Shorted to GND 27 Shorted to IN -4 OUT Short-Circuit Current ISC Dropout Voltage (Note 7) VIN - VOUT Thermal Hysteresis (Note 5) VOUT/cycle 135 ppm Long-Term Stability VOUT/time 1000hr at +25C 160 ppm/ 1000hr f = 0.1Hz to 10Hz 68 VP-P f = 10Hz to 1kHz 48 VRMS VOUT/VIN VIN = 15V 100mV, f = 120Hz 72 dB mA IOUT = 10A 1.9 IOUT = 10mA 2.25 V DYNAMIC CHARACTERISTICS Output Noise Voltage Ripple Rejection Turn-On Settling Time Capacitive-Load Stability (Note 6) en tR To VOUT = 0.1% of final value COUT = 50pF 140 COUT = 1F 300 COUT s 0 5 F 6.9 33 V INPUT CHARACTERISTICS Supply Voltage Range VIN Quiescent Current Supply IIN Change in Supply Current IIN/VIN Inferred by line regulation and dropout voltage 6.9V VIN 33V 80 100 A 0.4 0.7 A/V Note 2: All devices are 100% production tested at TA = +25C and are guaranteed by design for TA = TMIN to TMAX, as specified. Note 3: Temperature Coefficient is measured by the "box" method, i.e., the maximum VOUT is divided by the maximum T. Note 4: Line and load regulation are measured with pulses and do not include output voltage fluctuation due to die-temperature changes. Note 5: Thermal Hysteresis is defined as the change in the output voltage at TA = +25C before and after cycling the device from TMAX to TMIN. Note 6: Guaranteed by design. Note 7: Although the source current is guaranteed to be 10mA, exercise caution to ensure that the package's absolute power dissipation rating is not exceeded. _______________________________________________________________________________________ 5 Typical Operating Characteristics (VIN = 5V for MAX6035AAUR25/MAX6035AAUR30, VIN = 15V for MAX6035AAUR50, IOUT = 0, TA = +25C, unless otherwise noted.) OUTPUT VOLTAGE (V) 2.5015 2.5010 2.5005 2.999 2.997 5.001 5.000 2.995 4.998 2.4995 4.997 -15 10 60 35 110 85 -40 -15 10 35 -40 110 85 60 60 35 110 85 TEMPERATURE (C) MAX6035 LINE REGULATION (VOUT = 2.5V) MAX6035 LINE REGULATION (VOUT = 3V) MAX6035 LINE REGULATION (VOUT = 5V) TA = +85C 2.4995 2.4990 TA = +25C 2.4985 TA = +85C 2.9995 OUTPUT VOLTAGE (V) 2.5000 TA = +125C 3.0000 2.4980 2.9990 TA = +25C 2.9985 2.9980 2.9975 TA = -40C 2.9970 2.4975 22 TA = +85C 4.9985 TA = +25C 4.9980 TA = -40C 4.9970 4 34 28 4.9990 4.9975 2.9960 2.4970 16 TA = +125C 2.9965 TA = -40C 10 4.9995 MAX6035 toc05 TA = +125C 3.0005 OUTPUT VOLTAGE (V) 2.5005 10 16 22 28 6 34 10 14 18 22 26 30 INPUT VOLTAGE (V) INPUT VOLTAGE (V) INPUT VOLTAGE (V) MAX6035 LOAD REGULATION (VOUT = 2.5V) MAX6035 LOAD REGULATION (VOUT = 3V) MAX6035 LOAD REGULATION (VOUT = 5V) 2.4995 TA = +85C 2.4990 2.4985 2.4980 2.9995 TA = +25C 2.4975 TA = +85C 2.9990 2.9985 2.9980 2.9975 TA = +25C 2.9970 2.9965 2.4970 2.4965 0 2 4 6 LOAD CURRENT (mA) 8 TA = +85C 4.999 4.998 4.997 TA = +25C 4.996 TA = -40C TA = -40C 4.994 2.9955 10 TA = +125C 5.000 34 4.995 2.9960 TA = -40C 5.001 MAX6035 toc08 2.5000 TA = +125C 3.0000 OUTPUT VOLTAGE (V) TA = +125C 3.0005 OUTPUT VOLTAGE (V) 2.5005 MAX6035 toc07 2.5010 -2 10 TEMPERATURE (C) 2.5010 4 -15 TEMPERATURE (C) MAX6035 toc04 -40 MAX6035 toc06 2.993 2.4990 OUTPUT VOLTAGE (V) 5.002 4.999 2.5000 6 5.003 MAX6035 toc09 OUTPUT VOLTAGE (V) 2.5020 THREE TYPICAL PARTS 5.004 OUTPUT VOLTAGE (V) 3.001 MAX6035 toc03 THREE TYPICAL PARTS 2.5025 5.005 MAX6035 toc02 THREE TYPICAL PARTS 2.5030 3.003 MAX6035 toc01 2.5035 MAX6035AAUR50 OUTPUT VOLTAGE TEMPERATURE DRIFT MAX6035AAUR30 OUTPUT VOLTAGE TEMPERATURE DRIFT MAX6035AAUR25 OUTPUT VOLTAGE TEMPERATURE DRIFT OUTPUT VOLTAGE (V) MAX6035 High-Supply-Voltage, Precision Voltage Reference in SOT23 -2 0 2 4 6 LOAD CURRENT (mA) 8 10 -2 0 2 4 6 LOAD CURRENT (mA) _______________________________________________________________________________________ 8 10 High-Supply-Voltage, Precision Voltage Reference in SOT23 -20 -60 -60 -80 -80 -80 -100 -100 -100 -120 0.001 0.1 10 1000 0.1 10 1000 0.001 10 1000 FREQUENCY (kHz) MAX6035 SUPPLY CURRENT vs. INPUT VOLTAGE (VOUT = 2.5V) MAX6035 SUPPLY CURRENT vs. INPUT VOLTAGE (VOUT = 3V) MAX6035 SUPPLY CURRENT vs. INPUT VOLTAGE (VOUT = 5V) TA = +125C TA = -40C 85 TA = +25C 80 75 70 10 16 22 28 TA = +25C 80 TA = +125C 70 4 34 TA = -40C 85 75 TA = +125C 70 65 MAX6035 toc15 90 SUPPLY CURRENT (A) 80 95 MAX6035 toc14 90 SUPPLY CURRENT (A) TA = +25C 75 95 MAX6035 toc13 TA = -40C 10 16 22 28 34 6 12 18 24 30 INPUT VOLTAGE (V) INPUT VOLTAGE (V) INPUT VOLTAGE (V) MAX6035 OUTPUT IMPEDANCE vs. FREQUENCY (VOUT = 2.5V) MAX6035 OUTPUT IMPEDANCE vs. FREQUENCY (VOUT = 3V) MAX6035 OUTPUT IMPEDANCE vs. FREQUENCY (VOUT = 5V) 200 100 250 OUTPUT IMPEDANCE () OUTPUT IMPEDANCE () 300 300 300 200 100 MAX6035 toc18 400 MAX6035 toc16 400 MAX6035 toc17 4 0.1 FREQUENCY (kHz) 90 85 -120 0.001 FREQUENCY (kHz) 95 SUPPLY CURRENT (A) -40 PSRR (dB) -60 -120 OUTPUT IMPEDANCE () -20 -40 PSRR (dB) PSRR (dB) -40 MAX6035 toc12 -20 0 MAX6035 toc11 0 MAX6035 toc10 0 200 150 100 50 0 0 0 0.01 0.1 1 10 FREQUENCY (kHz) 100 1000 0.001 0.1 10 FREQUENCY (kHz) 1000 0.01 0.1 1 10 100 1000 FREQUENCY (kHz) _______________________________________________________________________________________ 7 MAX6035 Typical Operating Characteristics (continued) (VIN = 5V for MAX6035AAUR25/MAX6035AAUR30, VIN = 15V for MAX6035AAUR50, IOUT = 0, TA = +25C, unless otherwise noted.) MAX6035 MAX6035 MAX6035 POWER-SUPPLY REJECTION RATIO POWER-SUPPLY REJECTION RATIO POWER-SUPPLY REJECTION RATIO vs. FREQUENCY (VOUT = 2.5V) vs. FREQUENCY (VOUT = 5V) vs. FREQUENCY (VOUT = 3V) MAX6035 High-Supply-Voltage, Precision Voltage Reference in SOT23 Typical Operating Characteristics (continued) (VIN = 5V for MAX6035AAUR25/MAX6035AAUR30, VIN = 15V for MAX6035AAUR50, IOUT = 0, TA = +25C, unless otherwise noted.) MAX6035 toc21 MAX6035 toc20 MAX6035 toc19 20V/div 10V/div 10V/div 1s/div 1s/div 1s/div MAX6035 10Hz to 1kHz OUTPUT NOISE (VOUT = 2.5V) MAX6035 10Hz to 1kHz OUTPUT NOISE (VOUT = 3V) MAX6035 10Hz to 1kHz OUTPUT NOISE (VOUT = 5V) MAX6035 toc22 MAX6035 toc23 50V/div MAX6035 toc24 50V/div 100ms/div 100ms/div MAX6035 TURN-ON TRANSIENT (VOUT = 5V) MAX6035 TURN-ON TRANSIENT (VOUT = 3V) MAX6035 toc25 MAX6035 toc27 MAX6035 toc26 CL = 50pF CL = 50pF CL = 50pF VIN 5V/div 0V VIN 5V/div 0V VIN 10V/div VOUT 1V/div 0V VOUT 1V/div 0V VOUT 2V/div 10s/div 100V/div 100ms/div MAX6035 TURN-ON TRANSIENT (VOUT = 2.5V) 8 MAX6035 0.1Hz to 10Hz OUTPUT NOISE (VOUT = 5V) MAX6035 0.1Hz to 10Hz OUTPUT NOISE (VOUT = 3V) MAX6035 0.1Hz to 10Hz OUTPUT NOISE (VOUT = 2.5V) 10s/div 40s/div _______________________________________________________________________________________ High-Supply-Voltage, Precision Voltage Reference in SOT23 MAX6035 LOAD TRANSIENT (VOUT = 3V) MAX6035 LOAD TRANSIENT (VOUT = 2.5V) MAX6035 toc28 VOUT AC-COUPLED 100mV/div VL 10V/div MAX6035 LOAD TRANSIENT (VOUT = 5V) MAX6035 toc29 MAX6035 toc30 VOUT AC-COUPLED 200mV/div VOUT AC-COUPLED 100mV/div VL 10V/div VL 10V/div 40s/div (IOUT = 250A, CL = 0, RL = 10k) (Figure 1) 20s/div (IOUT = 250A, CL = 0, RL = 12k) (Figure 1) 20s/div (IOUT = 250A, CL = 0, RL = 20k) (Figure 1) MAX6035 LOAD TRANSIENT (VOUT = 3V) MAX6035 LOAD TRANSIENT (VOUT = 2.5V) MAX6035 LOAD TRANSIENT (VOUT = 5V) MAX6035 toc32 MAX6035 toc31 MAX6035 toc33 VOUT AC-COUPLED 20mV/div VOUT AC-COUPLED 20mV/div VOUT AC-COUPLED 20mV/div VL 5V/div VL 10V/div VL 10V/div 100s/div (IOUT = 250A, CL = 1F, RL = 10k) (Figure 1) 100s/div (IOUT = 250A, CL = 1F, RL = 12k) (Figure 1) MAX6035 LOAD TRANSIENT (VOUT = 2.5V) MAX6035 LOAD TRANSIENT (VOUT = 3V) MAX6035 toc34 100s/div (IOUT = 250A, CL = 1F, RL = 20k) (Figure 1) MAX6035 LOAD TRANSIENT (VOUT = 5V) MAX6035 toc35 MAX6035 toc36 VOUT AC-COUPLED 500mV/div VOUT AC-COUPLED 500mV/div VOUT AC-COUPLED 500mV/div VL 5V/div VL 5V/div VL 10V/div 10s/div (IOUT = 2mA, CL = 0, RL = 1.25k) (Figure 1) 40s/div (IOUT = 2mA, CL = 0, RL = 1.5k) (Figure 1) 20s/div (IOUT = 2mA, CL = 0, RL = 2.5k) (Figure 1) _______________________________________________________________________________________ 9 MAX6035 Typical Operating Characteristics (continued) (VIN = 5V for MAX6035AAUR25/MAX6035AAUR30, VIN = 15V for MAX6035AAUR50, IOUT = 0, TA = +25C, unless otherwise noted.) MAX6035 High-Supply-Voltage, Precision Voltage Reference in SOT23 Typical Operating Characteristics (continued) (VIN = 5V for MAX6035AAUR25/MAX6035AAUR30, VIN = 15V for MAX6035AAUR50, IOUT = 0, TA = +25C, unless otherwise noted.) MAX6035 LOAD TRANSIENT (VOUT = 5V) MAX6035 LOAD TRANSIENT (VOUT = 3V) MAX6035 LOAD TRANSIENT (VOUT = 2.5V) MAX6035 toc38 MAX6035 toc37 MAX6035 toc39 VOUT AC-COUPLED 100mV/div VOUT AC-COUPLED 100mV/div VOUT AC-COUPLED 20mV/div VL 5V/div VL 10V/div VL 10V/div 100s/div (IOUT = 2mA, CL = 1F, RL = 1.5k) (Figure 1) 40s/div (IOUT = 2mA, CL = 1F, RL = 1.25k) (Figure 1) MAX6035 LOAD TRANSIENT (VOUT = 2.5V) 200s/div (IOUT = 2mA, CL = 1F, RL = 2.5k) (Figure 1) MAX6035 LOAD TRANSIENT (VOUT = 5V) MAX6035 LOAD TRANSIENT (VOUT = 3V) MAX6035 toc40 MAX6035 toc42 MAX6035 toc41 VOUT AC-COUPLED 500mV/div VOUT AC-COUPLED 500mV/div VOUT AC-COUPLED 20mV/div VL 5V/div VL 5V/div VL 5V/div 20s/div (IOUT = 0 to 10mA, CL = 0, RL = 250) (Figure 2) 10 20s/div (IOUT = 0 to 10mA, CL = 0, RL = 300) (Figure 2) 200s/div (IOUT = 0 to 10mA, CL = 0, RL = 500) (Figure 2) ______________________________________________________________________________________ High-Supply-Voltage, Precision Voltage Reference in SOT23 MAX6035 LOAD TRANSIENT (VOUT = 2.5V) MAX6035 toc43 VOUT AC-COUPLED 100mV/div MAX6035 LOAD TRANSIENT (VOUT = 5V) MAX6035 LOAD TRANSIENT (VOUT = 3V) MAX6035 toc45 MAX6035 toc44 VOUT AC-COUPLED 100mV/div VOUT AC-COUPLED 100mV/div VL 5V/div VL 5V/div VL 5V/div 100s/div (IOUT = 0 to 10mA, CL = 1F, RL = 250) (Figure 2) 100s/div (IOUT = 0 to 10mA, CL = 1F, RL = 500) (Figure 2) 100s/div (IOUT = 0 to 10mA, CL = 1F, RL = 300) (Figure 2) MAX6035 LINE TRANSIENT (VOUT = 2.5V) MAX6035 LINE TRANSIENT (VOUT = 3V) MAX6035 LINE TRANSIENT (VOUT = 5V) MAX6035 toc46 MAX6035 toc47 MAX6035 toc48 CL = 0 CL = 0 CL = 0 VIN 500mV/div VIN 500mV/div VIN 500mV/div VOUT AC-COUPLED 100mV/div VOUT AC-COUPLED 100mV/div VOUT AC-COUPLED 100mV/div 4s/div 10s/div +VIN +VIN MAX6035 4s/div MAX6035 VOUT VOUT VOUT VOUT CL CL RL RL VL 2VOUT VL 0V 0V Figure 1. Load-Transient Test Circuit VOUT Figure 2. Load-Transient Test Circuit ______________________________________________________________________________________ 11 MAX6035 Typical Operating Characteristics (continued) (VIN = 5V for MAX6035AAUR25/MAX6035AAUR30, VIN = 15V for MAX6035AAUR50, IOUT = 0, TA = +25C, unless otherwise noted.) MAX6035 High-Supply-Voltage, Precision Voltage Reference in SOT23 Pin Description PIN NAME FUNCTION SOT23 SO 1 2 IN 2 6 OUT Reference Output 3 4 GND Ground 1, 3, 5, 7, 8 N.C. No Connection. Not internally connected. Input Voltage Applications Information power supply. Additionally, shunt-mode references have to be biased at the maximum expected load current, even if the load current is not present at the time. In the MAX6035 family, the load current is drawn from the input voltage only when required, so supply current is not wasted and efficiency is maximized at all input voltages. This improved efficiency reduces power dissipation and extends battery life. Thermal Hysteresis Thermal hysteresis is the change of output voltage at TA = +25C before and after the device is cycled over its entire operating temperature range. The typical temperature hysteresis value is 135ppm. Input Bypassing For the best line-transient performance, decouple the input with a 0.1F ceramic capacitor as shown in the Typical Operating Circuit. Locate the capacitor as close to the device as possible. Where transient performance is less important, no capacitor is necessary. Output/Load Capacitance Devices in the MAX6035 family do not require any output capacitance for frequency stability. In applications where the load or the supply can experience step changes, an output capacitor of at least 0.1F reduces the amount of overshoot (undershoot) and improves the circuit's transient response. Many applications do not require an external capacitor, and the MAX6035 family can offer a significant advantage in these applications when board space is critical. Supply Current The quiescent supply current of the MAX6035 seriesmode family is typically 73A and is virtually independent of the supply voltage, with only a 0.7A/V (max) variation with supply voltage. In contrast, the quiescent current of a shunt-mode reference is a function of the input voltage due to a series resistor connected to the 12 Turn-On Time These devices typically turn on and settle to within 0.1% of their final value in 240s. Increased output capacitance also increases turn-on time. Temperature Coefficient vs. Operating Temperature Range for a 1 LSB Maximum Error In a data converter application, the reference voltage of the converter must stay within a certain limit to keep the error in the data converter smaller than the resolution limit through the operating temperature range. Figure 3 shows the maximum allowable reference-voltage temperature coefficient to keep the conversion error to less than 1LSB, as a function of the operating temperature range (TMAX - TMIN) with the converter resolution as a parameter. The graph assumes the reference-voltage temperature coefficient as the only parameter affecting accuracy. In reality, the absolute static accuracy of a data converter is dependent on the combination of many parameters such as integral nonlinearity, differential nonlinearity, offset error, gain error, as well as voltage reference changes ______________________________________________________________________________________ High-Supply-Voltage, Precision Voltage Reference in SOT23 MAX6035 10,000 1000 100 TEMPERATURE COEFFICIENT (ppm/C) 8 BIT 10 10 BIT 12 BIT 1 14 BIT 16 BIT 0.1 18 BIT 0.01 1 10 OPERATING TEMPERATURE RANGE (TMAX - TMIN) (C) 20 BIT 100 Figure 3. Temperature Coefficient vs. Operating Temperature Range for a 1 LSB Maximum Error Chip Information TRANSISTOR COUNT: 84 PROCESS: BiCMOS ______________________________________________________________________________________ 13 Package Information (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information, go to www.maxim-ic.com/packages. SOT23 L.EPS MAX6035 High-Supply-Voltage, Precision Voltage Reference in SOT23 14 ______________________________________________________________________________________ High-Supply-Voltage, Precision Voltage Reference in SOT23 N E H INCHES MILLIMETERS MAX MIN 0.069 0.053 0.010 0.004 0.014 0.019 0.007 0.010 0.050 BSC 0.150 0.157 0.228 0.244 0.016 0.050 MAX MIN 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 1.27 BSC 3.80 4.00 5.80 6.20 0.40 SOICN .EPS DIM A A1 B C e E H L 1.27 VARIATIONS: 1 INCHES TOP VIEW DIM D D D MIN 0.189 0.337 0.386 MAX 0.197 0.344 0.394 MILLIMETERS MIN 4.80 8.55 9.80 MAX 5.00 8.75 10.00 N MS012 8 AA 14 AB 16 AC D A B e C 0-8 A1 L FRONT VIEW SIDE VIEW PROPRIETARY INFORMATION TITLE: PACKAGE OUTLINE, .150" SOIC APPROVAL DOCUMENT CONTROL NO. 21-0041 REV. B 1 1 Revision History Pages changed at Rev 2: 1, 2, 3, 12, 15 Pages changed at Rev 3: 1, 2, 15 Maxim cannot assume responsibility for use of any circuitry other than circuitry entirely embodied in a Maxim product. No circuit patent licenses are implied. Maxim reserves the right to change the circuitry and specifications without notice at any time. Maxim Integrated Products, 120 San Gabriel Drive, Sunnyvale, CA 94086 408-737-7600 ____________________ 15 (c) 2006 Maxim Integrated Products is a registered trademark of Maxim Integrated Products, Inc. MAX6035 Package Information (continued) (The package drawing(s) in this data sheet may not reflect the most current specifications. For the latest package outline information go to www.maxim-ic.com/packages.)