TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
RF01005 Rev D, November 2010 High Reliability Product Group Page 1 of 4
DEVICES MPLAD30KP14A thru MPLAD30KP400CA, e3
LEVELS
M, MA, MX, MXL
FEATURES
High reliability controlled devices with fabrication and assembly lot traceability
100 % surge tested devices
Low profile surface mount
Optional upscreening available by replacing the M prefix with MA, MX or MXL. These prefixes
specify various screening and conformance inspection options based on MIL-PRF-19500.
Refer to MicroNote 129 for more details on the screening options.
Suppresses transients up to 30 kW @ 10/1000 µs and 200 kW @ 8/20 µs (see Figure 1)
Moisture classification is Level 1 with no dry pack required per IPC/JEDEC J-STD-020B
RoHS compliant devices available by adding an “e3” suffix
3σ lot norm screening performed on Standby Current ID
APPLICATIONS / BENEFITS
Protection from switching transients and induced RF
Protection from ESD, and EFT per IEC 61000-4-2 and IEC 61000-4-4
Secondary lightning protection per IEC 61000-4-5 with 42 Ohms source impedance:
o Class 1,2,3,4,5: MPLAD30KP14A to 400CA
o Class 5: MPLAD30KP14A to 400CA (short distance)
o Class 5: MPLAD30KP14A to 220CA (long distance)
Secondary lightning protection per IEC 61000-4-5 with 12 Ohms source impedance:
o Class 1,2,3: MPLAD30KP14A to 400CA
o Class 4: MPLAD30KP14A to 220CA
Secondary lightning protection per IEC 61000-4-5 with 2 Ohms source impedance:
o Class 2: MPLAD30KP10A to 400CA
o Class 3: MPLAD30KP14A to 220CA
o Class 4: MPLAD30KP14A to 110CA
MAXIMUM RATINGS
Peak Pulse Power dissipation at 25 °C: 30,000 watts at 10/1000 μs (also see Figures 1 and 2)
with impulse repetition rate (duty factor) of 0.05 % or less
tclamping (0 volts to VBR min.): < 100 ps theoretical for unidirectional and < 5 ns for bidirectional
Operating and Storage temperature: -65 ºC to +150 ºC
Thermal resistance: 0.5 ºC/W junction to case or 50ºC/W junction to ambient when mounted
on FR4 PC board with recommended mounting pad (see page 2)
Steady-State Power dissipation: 250 watts at TC = 25 °C or 2.5 watts at TA = 25 °C when
mounted on FR4 PC board as described for thermal resistance
Forward Surge Voltage: 1500 Amps (theoretical) at 8.3mS half-sine wave (unidirectional
devices only)
Solder temperatures: 260 ºC for 10 s (maximum)
SURFACE MOUNT 30,000 W
Transient Voltage Suppressor
- High Reliability controlled devices
- Unidirectional (A) and Bidirectional (CA) construction
- Selections for 14 to 400 V standoff voltages (VWM)
- Fast response
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
RF01005 Rev D, November 2010 High Reliability Product Group Page 2 of 4
MECHANICAL AND PACKAGING
CASE: Void-free transfer molded thermosetting epoxy body meeting UL94V-0.
TERMINALS: Tin-Lead (90 % Sn, 10 % Pb) or RoHS (100% Sn) Compliant annealed matte-Tin plating readily
solderable per MIL-STD-750, method 2026.
MARKING: Body marked with part number
POLARITY: For unidirectional devices, the cathode is on the metal backside (package bottom)
Available in bulk or custom tape-and-reel packaging
TAPE-AND-REEL: Standard per EIA-481-B (add “TR” suffix to part number)
WEIGHT: 1.7-2.0 grams (approximately)
PACKAGE AND MOUNTING PAD DIMENSIONS Inches [mm]
SYMBOLS & DEFINITIONS
Symbol
Definition
Symbol
Definition
VWM
Working Peak (Standoff) Voltage
IPP
Peak Pulse Current
PPP
Peak Pulse Power
VC
Clamping Voltage
VBR
Breakdown Voltage
IBR
Breakdown Current for VBR
ID
Standby Current
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
RF01005 Rev D, November 2010 High Reliability Product Group Page 3 of 4
ELECTRICAL CHARACTERISTICS @ 25oC
MICROSEMI
PART NUMBER
(Note 2)
REVERSE
STAND-OFF
VOLTAGE
VWM
(Note 1)
VOLTS
BREAKDOWN
VOLTAGE
VBR @ IBR
VOLTS mA
MAXIMUM
CLAMPING
VOLTAGE
VC @ IPP
VOLTS
MAXIMUM
STANDBY
CURRENT
ID @ VWM
A
MAXIMUM
PEAK
PULSE
CURRENT
IPP (FIG. 3)
A
MAXIMUM
TEMPERATUR
E
COEFFICIENT
OF VBR
(αV(BR))
mV/ ºC
MPLAD30KP14A
MPLAD30KP15A
MPLAD30KP14CA
MPLAD30KP15CA
14
15
15.6 – 17.2
16.7 – 18.5
150
5
24.0
25.8
3000
750
1251
1164
10
12
MPLAD30KP16A
MPLAD30KP17A
MPLAD30KP16CA
MPLAD30KP17CA
16
17
17.8 – 19.7
18.9 – 20.9
5
5
27.2
28.8
450
150
1101
1041
12
14
MPLAD30KP18A
MPLAD30KP20A
MPLAD30KP18CA
MPLAD30KP20CA
18
20
20.0 – 22.1
22.2 – 24.5
5
5
30.8
34.0
60
45
975
882
16
18
MPLAD30KP22A
MPLAD30KP24A
MPLAD30KP22CA
MPLAD30KP24CA
22
24
24.4 – 26.9
26.7 – 29.5
5
5
36.4
39.8
10
10
822
753
20
22
MPLAD30KP26A
MPLAD30KP28A
MPLAD30KP26CA
MPLAD30KP28CA
26
28
28.9 – 31.9
31.1 – 34.4
5
5
43.0
46.4
10
10
696
645
24
26
MPLAD30KP30A
MPLAD30KP33A
MPLAD30KP30CA
MPLAD30KP33CA
30
33
33.3 – 36.8
36.7 – 40.6
5
5
48.8
53.3
10
10
618
564
30
35
MPLAD30KP36A
MPLAD30KP40A
MPLAD30KP36CA
MPLAD30KP40CA
36
40
40.0 – 44.2
44.4 – 49.1
5
5
58.1
64.5
10
10
516
468
38
44
MPLAD30KP43A
MPLAD30KP45A
MPLAD30KP43CA
MPLAD30KP45CA
43
45
47.8 – 52.8
50.0 – 55.3
5
5
69.4
72.7
10
10
432
414
50
51
MPLAD30KP48A
MPLAD30KP51A
MPLAD30KP48CA
MPLAD30KP51CA
48
51
53.3 – 58.9
56.7 – 62.7
5
5
77.4
82.4
10
10
390
366
54
58
MPLAD30KP54A
MPLAD30KP58A
MPLAD30KP54CA
MPLAD30KP58CA
54
58
60.0 – 66.3
64.4 – 71.2
5
5
87.1
93.6
10
10
342
318
64
70
MPLAD30KP60A
MPLAD30KP64A
MPLAD30KP60CA
MPLAD30KP64CA
60
64
66.7 – 73.7
71.1 – 78.6
5
5
96.8
103.0
10
10
312
294
72
75
MPLAD30KP70A
MPLAD30KP75A
MPLAD30KP70CA
MPLAD30KP75CA
70
75
77.8 – 86.0
83.3 – 92.1
5
5
113
121
10
10
264
246
84
90
MPLAD30KP78A
MPLAD30KP85A
MPLAD30KP78CA
MPLAD30KP85CA
78
85
86.7 – 95.8
94.4 - 104.0
5
5
126
137
10
10
240
216
95
104
MPLAD30KP90A
MPLAD30KP100A
MPLAD30KP90CA
MPLAD30KP100CA
90
100
100 – 111
111 – 123
5
5
146
162
10
10
204
186
109
122
MPLAD30KP110A
MPLAD30KP120A
MPLAD30KP110CA
MPLAD30KP120CA
110
120
122 – 135
133 – 147
5
5
177
193
10
10
168
156
132
145
MPLAD30KP130A
MPLAD30KP150A
MPLAD30KP130CA
MPLAD30KP150CA
130
150
144 – 159
167 – 185
5
5
209
243
10
10
142
124
157
183
MPLAD30KP160A
MPLAD30KP170A
MPLAD30KP160CA
MPLAD30KP170CA
160
170
178 – 197
189 – 209
5
5
259
275
10
10
116
110
195
207
MPLAD30KP180A
MPLAD30KP200A
MPLAD30KP180CA
MPLAD30KP200CA
180
200
200 – 221
222 – 245
5
5
291
322
10
10
104
94
219
243
MPLAD30KP220A
MPLAD30KP260A
MPLAD30KP220CA
MPLAD30KP260CA
220
260
245 – 271
289 – 320
5
5
356
419
10
10
84
71
269
318
MPLAD30KP280A
MPLAD30KP300A
MPLAD30KP350A
MPLAD30KP400A
MPLAD30KP280CA
MPLAD30KP300CA
MPLAD30KP350CA
MPLAD30KP400CA
280
300
350
400
311 – 345
333 – 369
389 – 431
444 - 492
5
5
5
5
451
483
564
644
10
10
10
10
66
62
53
46
344
368
430
490
NOTE 1: Transient Voltage Suppressors are normally selected with reverse “Stand Off Voltage” VWM, which should be equal to or
greater than the dc or continuous peak operating voltage level
NOTE 2: For bidirectional construction, indicate a CA suffix after the part number
NOTE 3: Items listed in Bold above are available ex-stock or with a short lead-time
TECHNICAL DATA SHEET
Gort Road Business Park, Ennis, Co. Clare, Ireland. 6 Lake Street, Lawrence, MA 01841
Tel: +353 (0) 65 6840044, Fax: +353 (0) 65 6822298 Tel: 1-800-446-1158 / (978) 794-1666, Fax: (978) 6890803
Website: http://www.microsemi.com
___________________________________________________________________________________________________________________________________
RF01005 Rev D, November 2010 High Reliability Product Group Page 4 of 4
GRAPHS
tp – Pulse Time – sec
FIGURE 1 Peak Pulse Power vs. Pulse Time
TL Lead Temperature °C
Test waveform parameters: tr = 10 s, tp = 1000 s
FIGURE 2 : Pulse Waveform FIGURE 3: Derating Curve
PPP Peak Pulse Power - kW
Peak Pulse Power (PPP) or
continuous Power in Percent of
25°C Rating
