F-219 FTS-110-02-F-DV FTS-111-02-L-DV-SA FTS-122-01-F-DV FTS-116-02-L-D (1.27 mm) .050" FTS SERIES MICRO LOW-PROFILE TERMINAL STRIPS SPECIFICATIONS Board Mates: CLP, FLE For complete specifications and recommended PCB layouts see www.samtec.com?FTS Cable Mates: FFSD Mates with socket strips or IDC cable Low-profile (1.27 mm) .050" OPTIONS Insulator Material: Black Liquid Crystal Polymer Terminal Material: Phosphor Bronze Operating Temp Range: -55 C to +125 C Plating: Sn or Au over 50 " (1.27 m) Ni Current Rating: 3.4 A per pin (2 pins powered) RoHS Compliant: Yes Lead-Free Solderable: Yes SMT Lead Coplanarity: .004" (0.10 mm) max -S OPTION -SA OPTION Surface mount or through-hole -P OPTION Shrouded and alignment pin options available Micro pitch .050" x .050" (1.27 mm x 1.27 mm) -TR OPTION Impedance matched for high-speed applications RECOGNITIONS For complete scope of recognitions see www.samtec.com/quality FTS 1 NO. PINS PER ROW LEAD STYLE PLATING OPTION ROW OPTION OTHER OPTION -D (-D & -DV only) FILE NO. E111594 (MOQ Required) = .120" (3.05 mm) Post (Mates with FFSD) 02 thru 50 * Alignment pin (except -S & -SA option = 05 thru 46) (5.84) .230 -02 No. of positions x .050 (1.27) 02 50 (1.27) .050 (3.42) .135 49 01 (2.16) .085 50 01 No of positions x .050 (1.27) + .325 (8.25) = -SA No of positions x .050 (1.27) + .200 (5.08) = - S 02 (0.86) .034 = .075" (1.91 mm) Post (Mates with FLE) 46 45 = .065" (1.65 mm) Post (Mates with CLP) (0.41) .016 SQ -DV -S -S = Single Through-hole = End Shroud (05 thru 46 positions. Style -02 & -03 only) (1.27) .050 DIA (1.59) .0625 LEAD STYLE - 01 - 02 - 03 - 04 A (3.05) .120 -SV (3.30) .130 X (5.08) .200 (4.06) .160 -P OPTION (1.65) .065 -TR = Tape & Reel (-DV only) (Required callout for positions 2 thru 4) (3.81) .150 (3.56) .140 A -DV -S OPTION -D Due to technical progress, all designs, specifications and components are subject to change without notice. WWW.SAMTEC.COM -P = Pick & Place Pad (04 positions minimum) (1.91) .075 (1.27) .050 A = Single Vertical SMT (1.40) .055 -SA OPTION (2.29) .090 -S -SA = End Shroud with Alignment Pin (05 thru 46 positions. Style -02 & -03 only) -SV = .150" (3.81 mm) Post (Shrouded options removed for clarity) -L = Double Vertical SMT (3.56) .140 (3.48) .137 01 = Double Through-hole = 10 " (0.25 m) Gold on post, Matte Tin on tail -04 (4.70) .185 = Gold flash on post, Matte Tin on tail -03 (1.27) .050 (4.57) .180 Note: Some lengths, styles and options are non-standard, non-returnable. -F -01 ALSO AVAILABLE All parts within this catalog are built to Samtec's specifications. Customer specific requirements must be approved by Samtec and identified in a Samtec customer-specific drawing to apply.