FRDM-KL25Z - Freescale Semiconductor

1 Introduction

................................

2 Functional Overview

................................

2.1 Introduction

................................

2.2 Accelerometer Only

................................

2.3

Accelerometer Plus Magnetometer

2.4

Accelerometer Plus Gyroscope

2.5

Accelerometer Plus Magnetometer Plus Gyroscope

3 Additional Support

................................

3.1

Freescale Sensor Fusion Toolbox for Android

3.2

Freescale Sensor Fusion Toolbox for Windows

3.3 Terms and Acronyms

................................

3.4 References

................................

Mechanical and Electrical Specifications

4.1 General Considerations

................................

4.2

Hardware Platforms Used to Measure Performance

4.3 Simulation Environments

................................

4.4 Frame of Reference

................................

4.5 Electrical Specifications

................................

4.6 Computation Metrics

................................

4.6.1

Statistics from Build #5.00 of the Sensor Fusion Library

4.7

Magnetic Calibration Metrics

4.7.1 Background

................................

4.7.2 The Magnetic Buffer

................................

4.7.3

Magnetic Calibration Performance Metrics

4.8

Fusion Model Performance Metrics

4.8.1 Background

................................

4.8.2

Gyro Offset Step Response

4.8.3

Error in Computed Linear Acceleration

4.8.4

Limitations Imposed via Sensor Choice/Configuration

4.8.5 9-Axis Parametrics

................................

4.8.6 6-

axis Accelerometer + Magnetometer Parametrics

Freescale Semiconductor

DATA SHEET: PRODUCT PREVIEW

Freescale Sensor Fusion

Updated for Freescale

Sensor Fusion Release 5.00

Contents

................................

................................................................

................................

................................................................

...............................

................................

Accelerometer Plus Magnetometer

................................

Accelerometer Plus Gyroscope

................................................................

................................

Accelerometer Plus Magnetometer Plus Gyroscope

................................

Freescale Sensor Fusion Toolbox for Android

................................

Freescale Sensor Fusion Toolbox for Windows

................................

................................................................

.............................

Mechanical and Electrical Specifications

................................

Hardware Platforms Used to Measure Performance

................................

...............................

................................

Statistics from Build #5.00 of the Sensor Fusion Library

................................

Magnetic Calibration Metrics

................................................................

................................

................................................................

................................

Magnetic Calibration Performance Metrics

................................

Fusion Model Performance Metrics

................................

................................................................

................................

Gyro Offset Step Response

................................................................

................................

Error in Computed Linear Acceleration

................................

Limitations Imposed via Sensor Choice/Configuration

................................

axis Accelerometer + Magnetometer Parametrics

................................

Document Number:

DATA SHEET: PRODUCT PREVIEW

Freescale Sensor Fusion

Library for Kinetis

Sensor Fusion Release 5.00

................................

.... 3

................................

...................... 6

...............................

................................

.................. 6

................................

........................... 7

................................

. 7

................................

. 7

................................

......................... 8

................................

.......... 9

................................

........ 9

................................

.............. 11

.............................

................................

................... 12

................................

.......... 12

...............................

................................

........ 16

................................

................ 18

................................

.......... 18

................................

............... 19

................................

.. 19

................................

... 20

................................

....... 20

................................

.......................... 21

................................

....................... 22

................................

......................... 22

................................

....... 22

................................

.............. 23

................................

............................. 24

................................

..... 25

................................

............................ 26

................................

........ 27

Document Number:

FSFLK_DS

Rev. 0.7, 9/2015

Library for Kinetis

MCUs

2 Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

4.8.7 6-axis Accelerometer + Gyro Parametrics ........................................................................................ 27

4.8.8 3-axis Accelerometer Only Parametrics ........................................................................................... 28

5 Test Descriptions ......................................................................................................................... 28

5.1 MCU Current .......................................................................................................................... 28

5.1.1 Intent ................................................................................................................................................. 28

5.1.2 Procedure ......................................................................................................................................... 28

5.2 Flash and RAM Required ........................................................................................................ 29

5.2.1 Intent ................................................................................................................................................. 29

5.2.2 Procedure ......................................................................................................................................... 29

5.3 Fusion Loop Execution Time................................................................................................... 29

5.4 Compass Heading Linearity and Accuracy .............................................................................. 29

5.4.1 Intent ................................................................................................................................................. 29

5.4.2 Procedure ......................................................................................................................................... 30

5.5 Orientation Static Drift ............................................................................................................. 31

5.5.1 Intent ................................................................................................................................................. 31

5.5.2 Procedure ......................................................................................................................................... 31

5.6 Orientation Static Noise .......................................................................................................... 32

5.6.1 Intent ................................................................................................................................................. 32

5.6.2 Procedure ......................................................................................................................................... 32

5.7 Orientation Dynamic Drift ........................................................................................................ 32

5.7.1 Intent ................................................................................................................................................. 32

5.7.2 Procedure ......................................................................................................................................... 32

5.8 Maximum Angular Rate .......................................................................................................... 32

5.8.1 Intent ................................................................................................................................................. 32

5.8.2 Procedure ......................................................................................................................................... 32

5.9 Orientation Response Delay ................................................................................................... 33

5.9.1 Waveform Definitions ........................................................................................................................ 33

5.9.2 Intent ................................................................................................................................................. 33

5.9.3 Procedure ......................................................................................................................................... 33

5.10 Orientation Magnetic Immunity (Static Device)........................................................................ 34

5.10.1 Intent ................................................................................................................................................. 34

5.10.2 Procedure ......................................................................................................................................... 34

5.11 Orientation Magnetic Immunity (Moving Device) ..................................................................... 34

5.11.1 Intent ................................................................................................................................................. 34

5.11.2 Procedure ......................................................................................................................................... 34

5.12 Error in Computed Gyro Bias .................................................................................................. 34

5.12.1 Intent ................................................................................................................................................. 34

5.12.2 Procedure ......................................................................................................................................... 34

5.13 Gyro Offset Step Response .................................................................................................... 35

5.13.1 Intent ................................................................................................................................................. 35

5.13.2 Procedure ......................................................................................................................................... 35

5.14 Error in Computed Linear Acceleration ................................................................................... 35

5.14.1 Intent ................................................................................................................................................. 35

5.14.2 Procedure ......................................................................................................................................... 35

6 Revision history for XSFLK_DS .................................................................................................. 36

Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

1 Introduction

Sensor Fusion is the process where data from several different sensors are fused to complete

computations that a single sensor could not handle. An example of sensor fusion is computing the

orientation of a device in 3-dimensional space using an accelerometer and magnetometer. That data

might then be used to alter the perspective presented by a 3D GUI or game.

The Freescale Sensor Fusion Library for Kinetis MCUs provides advanced functions for computation of

device orientation, linear acceleration, gyroscope offset and magnetic interference based upon the

outputs of Freescale inertial and magnetic sensors.

Features

•Supports:

— Accelerometer only (roll, pitch and tilt)

— Magnetometer only (2D auto)

— Gyro only

— Accelerometer plus magnetometer (eCompass)

— Accelerometer plus gyro (gaming)

— Accelerometer plus magnetometer plus gyroscope sensors

•Includes Freescale’s award-winning magnetic compensation software

— Provides geomagnetic field strength, hard- and soft-iron corrections, and quality-of-fit indication

•Very low power consumption

— 3 mA 9-axis fusion IDD on Kinetis ARM® Cortex® M0+ devices at 25 Hz fusion rate/200 Hz

sensor rate

— 0.6mA 9-axis fusion IDD on Kinetis ARM Cortex M4F devices at 25 Hz fusion rate/200 Hz sensor

rate

•Programmable sensor sample and fusion rates

•Supports multiple 3D frames of reference (aerospace NED, Android and Windows 8)

•Library is coded in standard C99 ANSI C

•Compatible with the Freescale Sensor Fusion Toolbox for Android and Windows

•Supported by Freescale CodeWarrior, Kinetis Design Studio and Processor Expert tools

•Out-of-the box support for the following Freedom Development Platforms with FRDM-FXS-MULTx

family of sensor boards

— Cortex M0+: FRDM-KL25Z / FRDM-KL26Z / FRDM-KL46Z

— Cortex M4: FRDM-K20D50M

— Cortex M4F: FRDM-K64F / FRDM-K22F (KDS only)

•Library version 5.00 includes bonus bare-metal implementations for tilt and eCompass.

Typical Applications

•Notebook, tablet and smartphone sensor fusion

•Gaming, motion control, head-mounted displays, wearable electronics

•Air mouse, remote control

•Navigation, eCompass, IoT (Internet of Things) sensor data management

Introduction

4 Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

Table 1. Feature Comparison of the Freescale Sensor Fusion Algorithm Options

Feature Accel only Mag only Gyro Only Accel + gyro Accel + mag Accel + mag + gyro

Filter type Low pass Low pass N/A Indirect Kalman Low pass1Indirect Kalman

Roll / Pitch / Tilt in degrees Yes No Yes Yes Yes Yes

Yaw in degrees No Yes Yes No Yes Yes

Angular rate2 in degrees/second virtual 2 axis3Yaw only Yes Yes virtual 3 axis Yes

Compass heading (magnetic north) in

degrees

No Yes No No Yes Yes

Quarternion and rotation vector Yes Yaw only Yes5Yes Yes Yes

Rotation matrix Yes Yaw only Yes5Yes Yes Yes

Linear acceleration separate from gravity No No No Yes No Yes

NED (North-East-Down) frame of reference Yes4Yes Yes4Yes4Yes Yes

ENU (Windows 8 variant) frame of reference Yes4Yes Yes4Yes4Yes Yes

ENU (Android variant) frame of reference Yes4Yes Yes4Yes4Yes Yes

Magnetic calibration included N/A Yes N/A N/A Yes Yes

Gyro offset calibration included N/A N/A No Yes N/A Yes

FRDM-KL25Z board support Yes Yes Yes Yes Yes Yes

FRDM-KL46Z board support Yes Yes Yes Yes Yes Yes

FRDM-K20D50M board support Yes Yes Yes Yes Yes Yes

FRDM-KL26Z board support Yes Yes Yes Yes Yes Yes

FRDM-K64F board support Yes Yes Yes Yes Yes Yes

FRDM-K22F board support KDS only

1. More precisely: a non-linear modified exponential low pass quaternion SLERP filter.

2. Angular rate for 6 and 9-axis configurations with a gyro include corrections for gyro offset.

3. Subject to well-known limitation of being blind to rotation about axes aligned with gravity.

4. These solutions do not include a magnetometer, therefore there is no sense of compass heading.

5. Rotations for gyro-only solution are relative to sensor position (there is no global frame).

Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

Table 2. Feature Options

Feature Options

License BSD 3-Clause

CPU selection MKL25Z128VLK4

MKL26Z128VLH4

MK20DX128VLH5

MKL46Z256VMC4

MK64FN1M0VLL12

MK22FN512VLH12 (KDS only)

Board customizable Yes

Sensor sample rate Programmable

Fusion rate Programmable

Frame of Reference Programmable

Algorithms Executing Programmable

Sleep mode enabled between

samples/calculations

It can be added by user, but will interfere with UART operation

RTOS MQX-Lite

Code flexibility Full source code is provided. All files are can be modified.

Access to Processor Expert Yes

Product Deliverables •This datasheet

•Software user guide

•Zip file containing both CodeWarrior and KDS projects

1. Listed MCUs are those supported by included project templates. The fusion library should be portable to any ARM®

processor without change. Ports to other architectures are expected to be very straightforward, as the library is written

in standard C.

2. FRDM-KL25Z, FRDM-KL26Z, FRDM-KL46Z, FRDM-K20D50M, FRDM-K64F and FRDM-K22F are supported out-of-the

box and may be used as templates for other boards.

3. The sensor fusion library was written assuming the MQXLite RTOS, but should be easily adaptable to other operating

systems. See the "Freescale Sensor Fusion for Kinetis User Guide" for additional details. The sensor fusion library has

also been incorporated into Freescale’s Intelligent Sensing Framework (ISF). ISF 2.2 offers an RTOS abstraction that

allows you to target alternate real time operating systems.

The Freescale Sensor Fusion Toolbox includes bonus projects for 3-axis tilt and 6-axis eCompass

running without an RTOS. Sensor shield boards are not needed for these configurations. This results in

very low-cost demonstration platforms. The bonus projects are compatible with the Sensor Fusion

Toolbox for Windows over USB connection. The FRDM-KL46Z eCompass version can also be used

stand-alone since the compass heading is displayed directly on the FRDM-KL46Z LCD display.

The bare-board eCompass projects have sensor sampling, sensor fusion and magnetic algorithms run

as a single task at 25Hz. On power up, the green LED flashes slowly to indicate that the software is

executing but that there is no magnetic calibration solution. The green LED then flashes rapidly to

signal that the compass heading display is accurate and that a valid magnetic calibration has been

obtained after rotating the Freedom development board.

Functional Overview

2.1 Introduction

Sensor fusion encompasses a variety of techniques that:

•

Trade off strengths and weaknesses of the

be calculated using the individual components

•

Improve the quality and noise level of computed results by taking advantage of:

—

Known data redundancies between sensors

—

Knowledge of system transfer

The Freescale Sensor Fusion Library for Kinetis (Fusion Library) supports several combinations of

sensors. In general, performance improves as more sensors are added to the system. The primary

function of the library is t

o compute orientation of a sensor subsystem relative to a global frame of

reference.

Orientation can be expressed in a number of different ways:

•

Tilt from vertical (may also be expressed as roll + pitch)

•

Compass heading (geomagnetic north)

•Full 3D rotation

from a global frame in any of the following forms:

— Rotation matrix

—

Rotation vector (3D axis of rotation and rotation about that axis)

— Quaternion

—

Euler angles (roll, pitch and yaw)

For additional portability details and guidelines refer to the

User Guide which is part of the

Sensor Fusion Library

source code form and

is designed to sit on top of board abstractions provided by Processor Expert and

MQXLite. The C source

and header files in the Sources directory of the project templates are board and

MCU independent.

Board dependencies are included as compile time options.

does not bring out the GPIO, I2C or UART needed, the board will not be compati

and therefore will not be supported by Processor Expert.

2.2

Accelerometer Only

An accelerometer measures linear acceleration minus gravity. If linear acceleration is zero, this sensor

can be used to measure tilt from vertical, roll and p

configuration.

Figure

Freescale

Sensor Fusion Library for Kinetis

Freescale

Functional Overview

Sensor fusion encompasses a variety of techniques that:

Trade off strengths and weaknesses of the

various sensors to compute something more than can

be calculated using the individual components

Improve the quality and noise level of computed results by taking advantage of:

Known data redundancies between sensors

Knowledge of system transfer

functions, dynamics and kinematics

The Freescale Sensor Fusion Library for Kinetis (Fusion Library) supports several combinations of

sensors. In general, performance improves as more sensors are added to the system. The primary

o compute orientation of a sensor subsystem relative to a global frame of

Orientation can be expressed in a number of different ways:

Tilt from vertical (may also be expressed as roll + pitch)

Compass heading (geomagnetic north)

from a global frame in any of the following forms:

Rotation vector (3D axis of rotation and rotation about that axis)

Euler angles (roll, pitch and yaw)

For additional portability details and guidelines refer to the

Freescale Se

nsor Fusion for Kinetis MCUs

Sensor Fusion Library

installation. The Fusion Library is available in

is designed to sit on top of board abstractions provided by Processor Expert and

and header files in the Sources directory of the project templates are board and

Board dependencies are included as compile time options.

If a particular board

does not bring out the GPIO, I2C or UART needed, the board will not be compati

ble with the software

and therefore will not be supported by Processor Expert.

Accelerometer Only

An accelerometer measures linear acceleration minus gravity. If linear acceleration is zero, this sensor

can be used to measure tilt from vertical, roll and p

itch. Computation of yaw is not supported by this

Figure

1. Accelerometer only block diagram

Sensor Fusion Library for Kinetis

MCUs, Rev. 0.7, 9/2015

Freescale

Semiconductor, Inc.

various sensors to compute something more than can

Improve the quality and noise level of computed results by taking advantage of:

The Freescale Sensor Fusion Library for Kinetis (Fusion Library) supports several combinations of

sensors. In general, performance improves as more sensors are added to the system. The primary

o compute orientation of a sensor subsystem relative to a global frame of

nsor Fusion for Kinetis MCUs

installation. The Fusion Library is available in

is designed to sit on top of board abstractions provided by Processor Expert and

and header files in the Sources directory of the project templates are board and

If a particular board

ble with the software

An accelerometer measures linear acceleration minus gravity. If linear acceleration is zero, this sensor

itch. Computation of yaw is not supported by this

Freescale Sensor F

usion Library for Kinetis MCUs

Freescale Semiconductor, Inc.

2.3

Accelerometer Plus Magnetometer

The accelerometer plus magnetometer configuration is often used as an electronic compass.

electronic compass is subject to the linear acceleration equals zero, assumption. Accuracy is

dependent upon negligible magnetic interference from the environment in which the sensors travel.

Figure 2.

Accelerometer plus

2.4

Accelerometer Plus Gyroscope

Using a gyroscope in addition to an accelerometer yields the ability to smoothly measure rotation in 3D

space, although the system can only yield orientation to some random horizontal global frame of

reference. That is, the system has no sense of magnetic north. Computation of yaw is not supported by

this configuration.

This configuration is commonly known as an Inertial Measurement Unit (IMU).

Figure 3.

Accelerometer Plus Gy

2.5

Accelerometer Plus Magnetometer Plus Gyroscope

Sometimes referred to as Magnetic, Angular Rate and Gravity (MARG), this subsystem offers an

optimal combination of sensors for smooth tracking of orientation and separation of gravity an

acceleration. This system is capable of yielding absolute orientation data with respect to magnetic

north.

usion Library for Kinetis MCUs

, Rev. 0.7, 9/2015

Accelerometer Plus Magnetometer

The accelerometer plus magnetometer configuration is often used as an electronic compass.

electronic compass is subject to the linear acceleration equals zero, assumption. Accuracy is

dependent upon negligible magnetic interference from the environment in which the sensors travel.

Accelerometer plus

magnetometer block diagram

Accelerometer Plus Gyroscope

Using a gyroscope in addition to an accelerometer yields the ability to smoothly measure rotation in 3D

space, although the system can only yield orientation to some random horizontal global frame of

reference. That is, the system has no sense of magnetic north. Computation of yaw is not supported by

This configuration is commonly known as an Inertial Measurement Unit (IMU).

Accelerometer Plus Gy

roscope Block Diagram

Accelerometer Plus Magnetometer Plus Gyroscope

Sometimes referred to as Magnetic, Angular Rate and Gravity (MARG), this subsystem offers an

optimal combination of sensors for smooth tracking of orientation and separation of gravity an

acceleration. This system is capable of yielding absolute orientation data with respect to magnetic

The accelerometer plus magnetometer configuration is often used as an electronic compass.

The

electronic compass is subject to the linear acceleration equals zero, assumption. Accuracy is

dependent upon negligible magnetic interference from the environment in which the sensors travel.

Using a gyroscope in addition to an accelerometer yields the ability to smoothly measure rotation in 3D

space, although the system can only yield orientation to some random horizontal global frame of

reference. That is, the system has no sense of magnetic north. Computation of yaw is not supported by

Accelerometer Plus Magnetometer Plus Gyroscope

Sometimes referred to as Magnetic, Angular Rate and Gravity (MARG), this subsystem offers an

optimal combination of sensors for smooth tracking of orientation and separation of gravity an

d linear

acceleration. This system is capable of yielding absolute orientation data with respect to magnetic

Additional Support

Figure 4.

Accelerometer Plus Magnetometer Plus Gyroscope Block Diagram

Additional Support

Freescale Sensor Fusion

Toolbox provides support for both Android and Windows operating systems.

See Table

for the differences between the two implementations.

Table 3. Fre

escale Sensor Fusion Toolbox Features by Platform

Feature

Bluetooth wireless link

Ethernet wireless link

UART over USB

OS requirements

Support for native sensors

Device View

Panorama View

Statistics View

Canvas View

Orientation XY Plots

Inertial XY Plots

Magnetics

Kalman

Altimeter XY Plots

Data Logging

Integrated documentation

Freescale

Sensor Fusion Library for Kinetis

Freescale

Accelerometer Plus Magnetometer Plus Gyroscope Block Diagram

Additional Support

Toolbox provides support for both Android and Windows operating systems.

for the differences between the two implementations.

escale Sensor Fusion Toolbox Features by Platform

Android

✔

Requires BT on PC (built

On WiGo board only

—

>=Android 4.0.3

>=Windows 7.0

✔

—

✔

Sensor Fusion Library for Kinetis

MCUs, Rev. 0.7, 9/2015

Freescale

Semiconductor, Inc.

Accelerometer Plus Magnetometer Plus Gyroscope Block Diagram

Toolbox provides support for both Android and Windows operating systems.

Requires BT on PC (built

-in or dongle)

—

✔

>=Windows 7.0

—

✔

—

✔

Freescale Sensor Fusion Library for Kinetis MCUs

Freescale Semiconductor, Inc.

Feature

Availability

Price

3.1

Freescale Sensor Fusion Toolbox for Android

The Fusion Library is supplied in the form of CodeWarrior projects for specific Freescale development

boards. The basic function of the Sensor Fusion

projects are compatible with the Freescale Sensor Fusion Toolbox for Android, which can be freely

downloaded from Google Play. For download and training links,

Figure 5.

Freescale Sensor Fusion Toolbox for Android Basic Functions

3.2

Freescale Sensor Fusion Toolbox for Windows

The Sensor Fusion Toolbox includes an equivalent v

and training links, visit

freescale.com/sensorfusion

Important Note

: Version 5.0 of the Sensor Fusion Library has a modified Kalman packet structure as

compared to that used in prior releases. Be sure you have downloaded the Windows toolbox built 3

Sept 2015 or later.

Freescale Sensor Fusion Library for Kinetis MCUs

, Rev. 0.7, 9/2015

Android

Google Play

Freescale website

Free

Freescale Sensor Fusion Toolbox for Android

The Fusion Library is supplied in the form of CodeWarrior projects for specific Freescale development

boards. The basic function of the Sensor Fusion

Android implementation are shown

projects are compatible with the Freescale Sensor Fusion Toolbox for Android, which can be freely

downloaded from Google Play. For download and training links,

visit freescale.

com/

Freescale Sensor Fusion Toolbox for Android Basic Functions

Freescale Sensor Fusion Toolbox for Windows

The Sensor Fusion Toolbox includes an equivalent v

ersion of the software for Windows. For download

freescale.com/sensorfusion

: Version 5.0 of the Sensor Fusion Library has a modified Kalman packet structure as

compared to that used in prior releases. Be sure you have downloaded the Windows toolbox built 3

Freescale website

Free

The Fusion Library is supplied in the form of CodeWarrior projects for specific Freescale development

Android implementation are shown

in Figure 5. These

projects are compatible with the Freescale Sensor Fusion Toolbox for Android, which can be freely

com/

sensorfusion.

Freescale Sensor Fusion Toolbox for Android Basic Functions

ersion of the software for Windows. For download

: Version 5.0 of the Sensor Fusion Library has a modified Kalman packet structure as

compared to that used in prior releases. Be sure you have downloaded the Windows toolbox built 3

Additional Support

Figure 6 and Figure 7

are Sensor Fusion Toolbox screenshots of the Windows version.

Figure

Freescale Sensor Fusion Libra

ry for Kinetis

Freescale

are Sensor Fusion Toolbox screenshots of the Windows version.

Figure 6. PC Version - Main Tab

Figure

7. PC Version - Magnetics Tab

ry for Kinetis

MCUs, Rev. 0.7, 9/2015

Freescale

Semiconductor, Inc.

are Sensor Fusion Toolbox screenshots of the Windows version.

Freescale Sensor Fusion Library for Kinetis MCUs

Freescale Semiconductor, Inc.

3.3

Terms and Acronyms

Term

DUT Device Under Test

ENU

A global frame of reference described by X =

abbreviation for gravities. 1 standard gravity

the local gravimetric field, which can vary by 1/2 percent depending upon altitude and latitude.

gauss

CGS system unit for measuring magnetic field strength. 100

IMU

Inertial Measurement Unit = acce

Kinetis Freescale family of ARM®-

based MCUs

MagCal Magnetic Calibration

MARG

Magnetic Angular Rate Gravity = IMU + magnetometer

MCU Micro-Controller Unit

microTesla

The Tesla is the SI unit for measuring magnetic field strength. 1E

NED

A global frame of reference described by X =

pitch

In the Aerospace/NED frame of reference, defined as a rotation about the Y

RHR Right Hand Rule—

a standard convention for describing the positive/negative sense of rotations about an axis

of rotation. See

http://en.wikipedia.org/wiki/Right_hand_rule

roll In the Aero

space/NED frame of reference, defined as a rotation about the X

RPY

Roll, Pitch, and Yaw. In the Aerospace/NED frame of reference these are defined as rotations about the X

axis,Y axis, and Z axis

International System of Units (meter, kilogram,

SLERP Spherical Linear intERP

olation

SysTick A feature of the ARM®

processor; a

clock cycle.

tilt Angle from vertical

UART

Universal Asynchronous Receiver / Transmitter, also known as SCI (Serial Communications Interface)

yaw

In the Aerospace/NED frame of reference, defined as a rotation about the Z

Freescale Sensor Fusion Library for Kinetis MCUs

, Rev. 0.7, 9/2015

Terms and Acronyms

Definition

A global frame of reference described by X =

East, Y = North, Z = Up

abbreviation for gravities. 1 standard gravity

= 9.80665 m/s2. Accelerometers are

commonly trimmed using

the local gravimetric field, which can vary by 1/2 percent depending upon altitude and latitude.

CGS system unit for measuring magnetic field strength. 100 µT = 1 gauss.

Inertial Measurement Unit = acce

lerometer + gyro

based MCUs

Magnetic Angular Rate Gravity = IMU + magnetometer

The Tesla is the SI unit for measuring magnetic field strength. 1E

–

4 Tesla = 100 µT = 1 gauss

A global frame of reference described by X =

North, Y = East, Z = Down

In the Aerospace/NED frame of reference, defined as a rotation about the Y

-axis

a standard convention for describing the positive/negative sense of rotations about an axis

http://en.wikipedia.org/wiki/Right_hand_rule

space/NED frame of reference, defined as a rotation about the X

-axis

Roll, Pitch, and Yaw. In the Aerospace/NED frame of reference these are defined as rotations about the X

International System of Units (meter, kilogram,

second, ...)

olation

- See http://en.wikipedia.org/wiki/SLERP

processor; a

clock timer which for the purposes of

this discussion, 1 sysTick =

Universal Asynchronous Receiver / Transmitter, also known as SCI (Serial Communications Interface)

In the Aerospace/NED frame of reference, defined as a rotation about the Z

-axis

commonly trimmed using

the local gravimetric field, which can vary by 1/2 percent depending upon altitude and latitude.

µT = 1 gauss

a standard convention for describing the positive/negative sense of rotations about an axis

Roll, Pitch, and Yaw. In the Aerospace/NED frame of reference these are defined as rotations about the X

this discussion, 1 sysTick =

1 CPU

Universal Asynchronous Receiver / Transmitter, also known as SCI (Serial Communications Interface)

Mechanical and Electrical Specifications

12 Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

3.4 References

1. "Orientation Representations: Part 1" at http://blogs.freescale.com/iot/2012/10/orientation-

representations-part-1/ community/the-embedded-beat/blog/2012/ 10/29/orientation-

representations-part-1

2. "Orientation Representations: Part 2" at http://blogs.freescale.com/sensors/2013/01/orientation-

representations-part-2/ community/the-embedded-beat/blog/2013/ 01/22/orientation-

representations-part-2

3."Hard and soft iron magnetic compensation explained" at

http://blogs.freescale.com/sensors/2011/03/hard-and-soft-iron-magnetic-compensation-explained/

community.freescale.com/community/the-embeddedbeat/ blog/2011/03/14/hard- and-soft-iron-

magnetic-compensation-explained

4. CodeWarrior Integrated Development Environment Software at freescale.com/codewarrior

5. Kinetis Design Studio Integrated Development Environment

6. "Euler Angles" at http://en.wikipedia.org/wiki/Euler_Angles

7. "Introduction to Random Signals and Applied Kalman Filtering", 3rd edition, by Robert Grover

brown and Patrick Y.C. Hwang, John Wiley & Sons, 1997

8. "Quaternions and Rotation Sequences", Jack B. Kuipers, Princeton University Press, 1999

9. Freescale Freedom development platform home page at freescale.com/freedom

10. OpenSDA User’s Guide, Freescale Semiconductor, Rev 0.93, 2012-09-18

11. PE micro Open SDA Support

12. PE micro Embedded OSBDM support

13. Matlab computer software by MathWorks—http://www.mathworks.com/products/ matlab/

14. www.freescale.com/opensda

4 Mechanical and Electrical Specifications

4.1 General Considerations

Fusion algorithms can be tuned to trade off one performance parameter versus another. Examples

include:

•Speedy handling of magnetic interference versus slower convergence to magnetic north

•Smoothness versus responsiveness

•Accuracy versus bandwidth

NOTE

All of the above means that there is no one correct configuration. Accordingly, this datasheet presents

typical performance as observed on the sample projects supplied by Freescale on specific Freescale

development platforms. No attempt has been made to measure a statistically significant number of

boards. Measured values are typically those observed on as few as one board.

Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

4.2 Hardware Platforms Used to Measure Performance

In the following subsections, some parametrics are measured, some represent simulated results. There

are multiple methods used to determine parametrics. These make use of hardware platforms for

benchmarking purposes, in addition to Matlab.

Kinetis Cortex M0+

This configuration is composed of a Freescale KL25Z, KL46Z or KL26Z Freedom development platform

paired with a FXS-MULT2-B Bluetooth-enabled sensor board

. Use of Bluetooth allows the board to be

rotated freely, untethered by cords or power cables.

Table 4. Cortex M0+ Test Configuration

Component / Parameter Value

Baseboard FRDM-KL25Z / FRDM-KL26Z / FRDM-KL-46Z

Sensor Board FRDM-FXS-MULT2-B

MCU Kinetis MKL25Z128VLK4 / MKL26Z128VLH4 / MKL46Z256VMC4

CPU ARM

Cortex M0+

CPU Clock 48 MHz

Bus Clock 24 MHz

Accelerometer FXOS8700CQ

Magnetometer

Gyroscope FXAS21000

Sensor Sampling Rate 200 Hz

Fusion Rate 25 Hz

Magnetic Calibration Rate Twice per minute once full calibration is reached

This board combination is battery powered and nominally regulated to 3.3 V for use by the sensors in

question.

1 The primary difference between the FRDM-FXS-MULTI-B and FRDM-FXS-MULT2-B is that the latter includes

a production FXAS21002 gyroscope, whereas the former used FXAS21000 pre-production units. The FRDM-

FXS-MULTI-B board is no longer in production, but continues to be supported by the kit. The two boards are

similar in appearance.

Mechanical and Electrical Specifications

14 Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

Figure 8. FRDM-KL25Z / FRDM-FXS-MULTI-B sensor fusion prototype platform

Figure 9. Expanded Diagram of FRDM-FXS-MULT2-B Sensor Board

Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

Kinetis Cortex M4

Table 5. Kinetis Cortex M4

Component / Parameter Value

Baseboard FRDM-K20D50M

Sensor Board FRDM-FXS-MULT2-B

MCU Kinetis MK20DX128VLH5

CPU ARM

Cortex M4

CPU Clock 48 MHz

Bus Clock 24 MHz

Accelerometer FXOS8700CQ

Magnetometer

Gyroscope FXAS21000

Sensor Sampling Rate 200 Hz

Fusion Rate 25 Hz

Magnetic Calibration Rate Twice per minute once full calibration is reached

This board combination is battery powered and nominally regulated to 3.3 V for use by the sensors in

question. Physically, the FRDM-K20D50M / FRDM-FXS-MULT2- B board combination is similar to the

KL25Z variant shown in Figure 8, with the exception that the bottom board is red.

Kinetis Cortex M4 with FPU

Table 6. Kinetis Cortex M4 with FPU

Component / Parameter Value

Baseboard FRDM-K64F / FRDM-K22F

Sensor Board FRDM-FXS-MULT2-B

MCU Kinetis MK64FN1M0VLL12 / MK22FN512VLH12

CPU ARM

Cortex M4 with FPU

CPU Clock 120 MHz

Bus Clock 60 MHz

Accelerometer FXOS8700CQ

Magnetometer

Gyroscope FXAS21000

Sensor Sampling Rate 200 Hz

Fusion Rate 25 Hz

Magnetic Calibration Rate Twice per minute once full calibration is reached

The FRDM-K64F /FRDM-K22F / FRDM-FXS-MULTI-B board combinations are similar to the KL25Z

variant shown in Figure 8, except that the bottom base board is different.

Mechanical and Electrical Specifications

4.3

Simulation Environments

Many parameters are difficult, if not impossible, to reliably measure in a lab or production

Ambient magnetic fields vary tremendously in indoor environments. Determining filter sensitivities to

various input parameters can only be done in a simulated environment.

Accordingly, the subsequent sub-

sections discuss environments that may

areas.

Pure Matlab

Matlab is commonly used in the early development of sensor fusion algorithms. It can be used to model

physical stimulus, expected responses and filter operation. See the next section for details concerning

senso

r and environmental models used to construct stimulus.

Matlab Stimulus/Expected Response + Hardware

Once algorithms are functional, they are translated into C, optimized and then optimized again. The

result often makes use of fixed point arit

accurate results, a mixture of Matlab (used to generate test stimulus and expected response) and

hardware (used to run the filter) are used to determine many parameters.

Simulated values were compu

ted with version 4.17 of the sensor fusion library. Version 4.22 should

have almost identical results. Version 5.00 is expected to have better dynamic tracking than indicated

in this datasheet, but simulations are still outstanding.

Figure 10.

Mixed Simulation/Hardware Characterization

Unless stated otherwise elsewhere, parameters used to create the simulated sensors and environment

are:

•

Earth magnetic field corresponding to U.S. zip code 85284 (Tempe, Arizona) on 7

as determined using the NOAA calculator at

—

Declination: 10 degrees 39’ 36”

—

Inclination: 59 degrees 32’ 53”

— Horizontal Intensity:

24.2976

— North Component (+N | -S):

23.8782

— East Component (+E | -W):

4.4945

— Vertical Component (+D | -

U):

Mechanical and Electrical Specifications

Freescale

Sensor Fusion Library for Kinetis

Freescale

Simulation Environments

Many parameters are difficult, if not impossible, to reliably measure in a lab or production

Ambient magnetic fields vary tremendously in indoor environments. Determining filter sensitivities to

various input parameters can only be done in a simulated environment.

sections discuss environments that may

be used to explore these

Matlab is commonly used in the early development of sensor fusion algorithms. It can be used to model

physical stimulus, expected responses and filter operation. See the next section for details concerning

r and environmental models used to construct stimulus.

Matlab Stimulus/Expected Response + Hardware

-based Fusion

Once algorithms are functional, they are translated into C, optimized and then optimized again. The

result often makes use of fixed point arit

hmetic running on an MCU to compute results. To ensure bit

accurate results, a mixture of Matlab (used to generate test stimulus and expected response) and

hardware (used to run the filter) are used to determine many parameters.

ted with version 4.17 of the sensor fusion library. Version 4.22 should

have almost identical results. Version 5.00 is expected to have better dynamic tracking than indicated

in this datasheet, but simulations are still outstanding.

Mixed Simulation/Hardware Characterization

Unless stated otherwise elsewhere, parameters used to create the simulated sensors and environment

Earth magnetic field corresponding to U.S. zip code 85284 (Tempe, Arizona) on 7

as determined using the NOAA calculator at

ngdc.noaa.gov/geomag-web

Declination: 10 degrees 39’ 36”

Inclination: 59 degrees 32’ 53”

24.2976

µT

23.8782

µT

4.4945

µT

U):

41.3285 µT

Sensor Fusion Library for Kinetis

MCUs, Rev. 0.7, 9/2015

Freescale

Semiconductor, Inc.

Many parameters are difficult, if not impossible, to reliably measure in a lab or production

environment.

Ambient magnetic fields vary tremendously in indoor environments. Determining filter sensitivities to

be used to explore these

Matlab is commonly used in the early development of sensor fusion algorithms. It can be used to model

physical stimulus, expected responses and filter operation. See the next section for details concerning

Once algorithms are functional, they are translated into C, optimized and then optimized again. The

hmetic running on an MCU to compute results. To ensure bit

accurate results, a mixture of Matlab (used to generate test stimulus and expected response) and

ted with version 4.17 of the sensor fusion library. Version 4.22 should

have almost identical results. Version 5.00 is expected to have better dynamic tracking than indicated

Unless stated otherwise elsewhere, parameters used to create the simulated sensors and environment

Earth magnetic field corresponding to U.S. zip code 85284 (Tempe, Arizona) on 7

November 2013

Freescale Sensor Fusion Library for Kinetis MCUs

Freescale Semiconductor, Inc.

— Total field: 47.9418 µT

•

Ideal accelerometer model + simple noise

— Sample rate = 200 Hz

— milli-g noise on X,Y,Z

— 1 g = 9.80665 m/s

assumed

•

Ideal magnetometer model + simple nose

— Sample rate = 200 Hz

— X, Y noise 0.85 µT; Z noise

1.3

• No hard/soft iron distortion

•

Ideal gyroscope model and simple noise

— Sample rate 200 Hz

— X, Y, Z noise 0.3 dps

For all tests, the Freescale Matlab-

based Trajectory & Sensor Simulation Toolkit (TSim) is used to

create DUT trajectories and simulated sensors readings.

Some of the tests require that magnetic calibration procedure is run before the test to initialize the

sensor fusion software

magnetic buffer. Magnetic calibration is implemented as a trajectory made up of

a sequence of random rotations lasting 30seconds.

Benchtop Rotary Table

A variant on the Matlab-

based system is shown

desktop rotary table and to post-

process the fusion results into reports. Physical sensor readings are

used to drive the fusion routines. Because indoor environments vary magnetically, results may vary

from day to day as the setup is

moved or electronics in the area cycle on and off.

Results will also change simply because the state of the magnetic buffer is continuously updated.

Figure

Freescale Sensor Fusion Library for Kinetis MCUs

, Rev. 0.7, 9/2015

Ideal accelerometer model + simple noise

assumed

Ideal magnetometer model + simple nose

1.3

µT

Ideal gyroscope model and simple noise

based Trajectory & Sensor Simulation Toolkit (TSim) is used to

create DUT trajectories and simulated sensors readings.

Some of the tests require that magnetic calibration procedure is run before the test to initialize the

magnetic buffer. Magnetic calibration is implemented as a trajectory made up of

a sequence of random rotations lasting 30seconds.

based system is shown

in Figure 11. In this case, Matlab

is used to control a

process the fusion results into reports. Physical sensor readings are

used to drive the fusion routines. Because indoor environments vary magnetically, results may vary

moved or electronics in the area cycle on and off.

Results will also change simply because the state of the magnetic buffer is continuously updated.

Figure

11. Benchtop Rotary Table Setup

based Trajectory & Sensor Simulation Toolkit (TSim) is used to

Some of the tests require that magnetic calibration procedure is run before the test to initialize the

magnetic buffer. Magnetic calibration is implemented as a trajectory made up of

is used to control a

process the fusion results into reports. Physical sensor readings are

used to drive the fusion routines. Because indoor environments vary magnetically, results may vary

Results will also change simply because the state of the magnetic buffer is continuously updated.

Mechanical and Electrical Specifications

18 Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

4.4 Frame of Reference

Table summarizes differences between the standard frames of reference supported by the fusion

library.

Table 7. Frame of Reference Variations

NED Android Windows 8

Axes alignment NED ENU ENU

Angle rotation order Yaw then pitch then roll Yaw then roll then pitch Yaw then pitch then roll

Gimbal lock Roll instability (x axis) at ±90

deg pitch (y axis)

Pitch instability (x axis) at ±90

deg roll (y axis)

Roll instability (y axis) at ±90

deg pitch (x axis)

Roll range Clockwise

–180 to 180 deg

Anti-clockwise

–90 to 90 deg

Clockwise

–90 to 90 deg

Pitch range –90 to 90 deg –180 to 180 deg –180 to 180 deg

Yaw range 0 to 360 0 to 360 0 to 360

Compass heading Yaw Yaw –Yaw

1. A clockwise rotation is defined as one that is positive in the Right-Hand-Rule (RHR) sense.

4.5 Electrical Specifications

The parameters in each table are measured using the configurations defined in Hardware Platforms

Used to Measure Performance. The MCU currents are estimated using the process defined in MCU

Current.

Tables 8 and 9 were developed using the build #5.00 of the Sensor Fusion Library.

Table 8. Typical I

for FRDM-KL26Z only

Function Fusion I

@ 25Hz rate (mA) Fusion I

/ Hz (mA)

Accel only 0.25 0.01

2D Mag 0.19 0.01

Gyro only 0.74 0.03

Accel + Mag, eCompass 0.31 0.01

Accel + Gyro 0.92 0.04

9-axis 3.20 0.13

subtotal 5.61 0.22

estimated RTOS/other 2.79 0.44

Table 9. 9-Axis I

as a Function of Board and Development Tool

Function Fusion Idd @ 25Hz rate (mA)

Compiled with CodeWarrior

Fusion Idd / Hz (mA)

Compiled with KDS

FRDM-K64F 0.40 0.51

FRDM-K22F N/A 0.41

FRDM-K20D50M 3.53 4.11

FRDM-KL46Z 3.70 4.16

FRDM-KL26Z 3.20 3.76

FRDM-KL25 2.47 2.93

Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

4.6 Computation Metrics

The Sensor Fusion Library computations are measured directly using the Sensor Fusion Toolbox and

the ARM

sysTick clock.

4.6.1 Statistics from Build #5.00 of the Sensor Fusion Library

For the current build (5.00), Freescale used the built in sysTick counter to measure each iteration of the

algorithm in units of CPU clock cycles. The customer can repeat the exact same measurement,

because both PC and Android Sensor Fusion Toolboxes display this information in a real-time basis.

The test results will vary depending device movement are presented as “typical” numbers.

Table 10. SysTick Values for Freedom Development Platforms and Sensor Combinations

Freedom Platform Accel 2D Mag Gyro eCompass Accel

+Gyro

9-axis

SysTick Values for CodeWarrior Build 5.00 in kTicks

KL25Z 58 46 172 72 208 740

KL26Z 58 45 171 71 210 740

KL46Z 59 45 171 72 207 740

K20D50M 34 26 63 42 157 509

K64F 3.1 2.86 4.5 3.6 10.6 50.5

KL25Z 58 46 172 72 208 740

SysTick Values for KDS Build 5.00 in kTicks

KL25Z 59 47 174 74 211 840

KL26Z 61 48 173 75 211 860

KL46Z 60 49 174 74 210 840

K20D50M 35 27 66 44 160 580

K64F 3.3 3.1 4.9 3.9 11.4 54.6

K22F 3.9 3.7 5.8 4.4 13.4 59.1

Mechanical and Electrical Specifications

20 Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

Table 11. Memory Requirements for “All Algorithms” Builds

Freedom Platform Text Data BSS Flash RAM

CodeWarrior

FRDM-KL25Z 96028 72 14776 96100 14848

FRDM-KL26Z 96020 72 14780 96092 14852

FRDM-KL46Z 95956 72 14780 96028 14852

FRDM-K20D50M 88116 72 14972 88188 15044

FRDM-K64F 79724 84 16484 79808 16568

KDS

FRDM-KL25Z 77812 172 14816 77984 14988

FRDM-KL26Z 77828 172 14816 78000 14988

FRDM-KL46Z 77772 172 14816 77944 14988

FRDM-K20D50M 67356 172 15008 67528 15180

FRDM-K64F 65024 184 16652 65208 16836

FRDM-K22F 62268 184 16492 62452 16676

Table 12. CodeWarrior Memory Requirements for FRDM-KL25Z and Single Algorithm

Freedom Platform Text Data BSS Flash RAM

Accel (Tilt) 34280 64 12580 34344 12644

2D Mag 53904 64 12580 53968 12644

Gyro Only 33944 64 12528 34008 12592

Accel/Mag 55172 64 12588 55236 12652

Accel/Gyro 54716 72 12892 54788 12964

9-axis 75552 64 13664 75616 13728

4.7 Magnetic Calibration Metrics

4.7.1 Background

Hard-iron effects are due to magnetic materials in the vicinity of the sensor. These materials result in an

apparent offset to sensor readings when the source of interference is fixed spatially, relative to the

sensor.

For a given point in space, plotting magnetometer measurements at various sensor rotations results in

the sphere shown on the right hand side of Figure 12. This makes sense, as the magnitude of the 3D

magnetic field should not change just because the sensor is rotated.

Soft-iron effects result from the interaction of ferrous materials near the sensor interacting with the

ambient magnetic field. If the source of soft iron interference is again fixed spatially with respect to the

sensor and does not demonstrate magnetic hysteresis, then the sphere of plotted measurements is

distorted into an ellipsoid. This is shown (along with a hard-iron offset) on the left side of Figure 12.

Reference 2: Orientation Representations provides background on the topic of hard- and soft-iron

magnetic compensation. For the case where the sensor and sources of interference are spatially fixed

with respect to one another, the distortions are linear, and can be reversed mathematically. This is the

function of the Freescale magnetic calibration library.

Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

Figure 12. Distorted (left) and Corrected (right) Magnetic Field Data (simulated)

Both hard- and soft-iron interferences are a function of the sensor environment, and not the sensor

itself. Each product design will inevitably result in different distortions.

Engineers assigned the task of physically designing PCBs and housings should pay careful attention to

sources of magnetic interference early in the design phase.

Inductive charging films found in some portable devices exhibit a significant amount of magnetic

hysteresis. This is a nonlinear phenomena and cannot be fully corrected by the Freescale magnetic

calibration library.

4.7.2 The Magnetic Buffer

Freescale’s magnetic calibration library performs a total least squares fit of a number of data points to

map the measured ellipsoid of measurements back into the ideal sphere. Quality of that fit improves as

number and spacing of samples across the ellipsoid surface increases. There is a tradeoff in terms of

data set size used for calibration versus CPU resources versus quality of fit.

Figure 13 shows improvement in standard deviation of computed results (for a uniform field) versus

constellation size.

Mechanical and Electrical Specifications

22 Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

Figure 13. Simulated Standard Deviation and Variance as f(constellation size)

4.7.3 Magnetic Calibration Performance Metrics

Table 13 provides some basic guidance with regard to performance of the magnetic calibration library

in a stand-alone configuration.

Table 13. Magnetic Calibration Performance Metrics

Characteristic Symbol Conditions Min Typ Max Unit

Compass heading linearity;

see Compass Heading

Linearity and Accuracy

TBD — — < 5 — degrees

Compass heading accuracy;

see Compass Heading

Linearity and Accuracy

TBD — < 5 — degrees

NOTE:

The results shown in this table are more conservative than simulated numbers, and are more likely to be representative of

actual results.

4.8 Fusion Model Performance Metrics

4.8.1 Background

The six and nine-axis Kalman filters are optimized for calculation of device orientation. Unmodelled

sources of error will affect the other sensor outputs. Tradeoffs are a function of the Kalman filter

configuration and are subject to change.

Separate tables are presented for each of the sensor combination options provided by the Fusion

Library. Common test conditions and setups are used for all options.

Freescale Sensor Fusion Library for Kinetis MCUs

Freescale Semiconductor, Inc.

NOTE:

Results that follow are simulated

nonlinearity and other factors. See

Simulation Environments

to be improved from the 4.17 plots shown here.

4.8.2

Gyro Offset Step Response

Gyro Offset Step Response plots are shown in

Accelerometer+Gyro algorithms, respectively and provide an indication of the responsiveness of the

system to changes in gyro offsets. The simulation artificially introduces a step in the modeled gyro

offset. However, under normal circumstances, gy

change such as this would likely occur are:

• at powerup

•

if the gyro has an autonomous offset cancellation circuit (which Freescale recommends be turned

OFF).

Figure 14.

Gyro

Freescale Sensor Fusion Library for Kinetis MCUs

, Rev. 0.7, 9/2015

Results that follow are simulated

build 4.17 using basic sensor m

odels which include noise effects, but ignore

Simulation Environments

for details. B

uild 5.00 dynamic performance is expected

to be improved from the 4.17 plots shown here.

Gyro Offset Step Response

Gyro Offset Step Response plots are shown in

Figure 14 and Figure 15 for 9-

axis and

Accelerometer+Gyro algorithms, respectively and provide an indication of the responsiveness of the

system to changes in gyro offsets. The simulation artificially introduces a step in the modeled gyro

offset. However, under normal circumstances, gy

ro offsets change very slowly. The only times that a

change such as this would likely occur are:

if the gyro has an autonomous offset cancellation circuit (which Freescale recommends be turned

Gyro

Offset Step Response for 9-Axis algorithm

odels which include noise effects, but ignore

uild 5.00 dynamic performance is expected

axis and

6- axis

Accelerometer+Gyro algorithms, respectively and provide an indication of the responsiveness of the

system to changes in gyro offsets. The simulation artificially introduces a step in the modeled gyro

ro offsets change very slowly. The only times that a

if the gyro has an autonomous offset cancellation circuit (which Freescale recommends be turned

Mechanical and Electrical Specifications

Figure 15.

Gyro Offset Step Response for 6

4.8.3

Error in Computed Linear Acceleration

Estimation of linear acceleration in the 9

lasting less than 1 second. Continuous accelerations are inconsistent with modeled dynamics, and the

acceleration estimation error increases. The acceleration error starts leaking into the estimates of

orientation resulting

in errors in gyro offset and magnetic disturbance estimates.

and Figure 18

present the true and 9

lasting 0.5 s, 1 s and 5 s

respectively.

Figure 16.

True and calculated linear acceleration, acceleration time 0.5 s

Mechanical and Electrical Specifications

Freescale

Sensor Fusion Library for Kinetis

Freescale

Gyro Offset Step Response for 6

Axis Accelerometer+Gyro algorithm

Error in Computed Linear Acceleration

Estimation of linear acceleration in the 9

-axis algorithm is optimized f

or short duration accelerations

lasting less than 1 second. Continuous accelerations are inconsistent with modeled dynamics, and the

acceleration estimation error increases. The acceleration error starts leaking into the estimates of

in errors in gyro offset and magnetic disturbance estimates.

Figure 16

present the true and 9

axis algorithm calculated linear acceleration for

respectively.

True and calculated linear acceleration, acceleration time 0.5 s

Sensor Fusion Library for Kinetis

MCUs, Rev. 0.7, 9/2015

Freescale

Semiconductor, Inc.

Axis Accelerometer+Gyro algorithm

or short duration accelerations

lasting less than 1 second. Continuous accelerations are inconsistent with modeled dynamics, and the

acceleration estimation error increases. The acceleration error starts leaking into the estimates of

Figure 16

, Figure 17

axis algorithm calculated linear acceleration for

accelerations

True and calculated linear acceleration, acceleration time 0.5 s

Freescale Sensor Fusion Libra

ry for Kinetis MCUs

Freescale Semiconductor, Inc.

Figure 17.

True and calculated linear acceleration, acceleration time 1

Figure 18.

True and calculated linear acceleration, acceleration time 5 s

Similar dependence on the magnetic pulse duration time was noticed in the Orientation Magnetic

Immunity tests. A slow-

moving magnet introduces a longer

than a fast-

moving magnet. The longer the magnetic disturbance pulse lasts, the greater the orientation

error it causes on the output of the fusion algorithm.

4.8.4

Limitations Imposed via Sensor Choice/Configuration

Table 14

represents the sensor configuration used to determine parameters specified in this datasheet.

ry for Kinetis MCUs

, Rev. 0.7, 9/2015

True and calculated linear acceleration, acceleration time 1

True and calculated linear acceleration, acceleration time 5 s

Similar dependence on the magnetic pulse duration time was noticed in the Orientation Magnetic

moving magnet introduces a longer

lasting magnetic field disturbance pulse

moving magnet. The longer the magnetic disturbance pulse lasts, the greater the orientation

error it causes on the output of the fusion algorithm.

Limitations Imposed via Sensor Choice/Configuration

represents the sensor configuration used to determine parameters specified in this datasheet.

True and calculated linear acceleration, acceleration time 1

True and calculated linear acceleration, acceleration time 5 s

Similar dependence on the magnetic pulse duration time was noticed in the Orientation Magnetic

lasting magnetic field disturbance pulse

moving magnet. The longer the magnetic disturbance pulse lasts, the greater the orientation

represents the sensor configuration used to determine parameters specified in this datasheet.

Mechanical and Electrical Specifications

26 Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

Table 14. Sensor/Configuration Imposed Limitations

Characteristic Symbol Min Max Unit

Maximum Angular Rate AR

max

–2000 +2000 dps

Linear Acceleration LA

max

–4 +4

Magnetic Field B

max

–1200 +1200 µT

It is believed that the fusion algorithms themselves have no upper limits on any of the parameters

above. These are strictly limits associated with the specific physical sensors used to characterize the

library.

4.8.5 9-Axis Parametrics

Table 15 provides guidance for the 9-axis (accelerometer/magnetometer/gyro) indirect Kalman filter

implementation.

NOTE:

All parametrics provided in the following table are based on build 4.17 simulations. Build 5.00 simulations

are still pending.

Table 15. 9-axis Sensor Fusion Performance Metrics

Characteristic Symbol Conditions(s) Min Typ Max Unit

Orientation static drift O

See Orientation Static Drift — 0.05 — degrees

Orientation static noise O

See Orientation Static Noise — 1.21 — degrees

RMS

Orientation dynamic drift O

See Orientation Dynamic Drift — 0.17 — degrees

Max angular Rate AR

MAX

See Maximum Angular Rate — 1600

Error!

Reference

source not

found.

— dps

Orientation response delay O

See Orientation Response

Delay

— <1 —

fusion

time

interval

Gyro offset step response T

GOSR

See Gyro Offset Step

Response

— 3.76 — seconds

Error in computed linear

acceleration

LAE See Error in Computed Linear

Acceleration

— 0.243 —

Compass heading

linearity

See Compass Heading

Linearity and Accuracy

— 1.02 — degrees

Compass heading

accuracy

acc

— 1.37 — degrees

Orientation magnetic

immunity - static device

mis

See Orientation Magnetic

Immunity (Static Device)

— 9.36 — degrees

Orientation magnetic

immunity - moving device

mim

See Orientation Magnetic

Immunity (Moving Device)

— 8.98 — degrees

Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

1. The Sensor Fusion algorithm has no intrinsic limitation; this was the maximum value supported by the gryo in Freescale

testing.

2. Number of output sampling periods where one period = 40 ms

3. Linear sensors, which yields very good compass heading values were assumed. However experience shows that +/5

degrees are more realistic values.

4.8.6 6-axis Accelerometer + Magnetometer Parametrics

NOTE:

All parametrics provided in the following table are based on build 4.17 simulations. Build 5.00 is believed to

have similar performance.

Table 16. 6-axis Sensor Fusion Accel + Mag Performance Metrics

Characteristic Symbol Conditions(s) Min Typ Max Unit

Orientation static drift O

See Orientation Static Drift — 0.0018 — degrees

Orientation static noise O

See Orientation Static Noise — 1.06 — degrees

RMS

Orientation dynamic drift O

See Orientation Dynamic Drift — 1.16 — degrees

Orientation response delay O

See Orientation Response

Delay

— <10 — sample

periods

ror!

Reference

source not

found.

Compass heading

linearity

See Compass Heading

Linearity and Accuracy

— 1.20 — degrees

Compass heading

accuracy

acc

— 1.58 — degrees

1. Number of output sampling periods where one period = 40 ms

2. Linear sensors, which yields very good compass heading values were assumed. However, experience shows that ±5

degrees are more realistic values.

4.8.7 6-axis Accelerometer + Gyro Parametrics

NOTE:

All parametrics provided in the following table are based on build 4.17 simulations. Build 5.00 is believed to

have similar static and improved dynamic performance.

Table 17. 6-axis Sensor Fusion Gyro + Accel Performance Metrics

Characteristic Symbol Conditions(s) Min Typ Max Unit

Orientation static drift O

See Orientation Static Drift — 19.07 — degrees

Orientation static noise O

See Orientation Static Noise — 0.068 — degrees

RMS

Orientation dynamic drift O

See Orientation Dynamic Drift — 2.04 — degrees

Max angular Rate AR

MAX

See Maximum Angular Rate — 1440 — dps

Orientation response delay O

See Orientation Response

Delay

Error! Reference source not found.

— <1 — sample

periods

Gyro offset step response TBD See Gyro Offset Step

Response

— 3.76 — seconds

Test Descriptions

28 Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

1. Output sampling period = 40 ms

2. Number of output sampling periods where one period = 40 ms

4.8.8 3-axis Accelerometer Only Parametrics

NOTE:

All parametrics provided in the following table are based on build 4.17 simulations. Build 5.00 should be

similar.

Table 18. 3-axis Accelerometer Performance Metrics

Characteristics Symbol Conditions Min Typ Max Units

Tilt Error RMS TAE Note 1 — 0.082 — degrees

Orientation response delay O

See Orientation Response

Delay

— < 5 — output

sample

period

1. RMS of accelerometer tilt angle error is calculated using the simulated sensor noise RMS values along each of the

three axes and the following formula (given for tilt error from the z-axis)

TAE=arctan













 ,

where NRMSx, NRMSy, NRMSz - RMS values of accelerometer noise for X, Y, Z axes in g units.

2. Number of output sampling periods where one period = 40 ms

5 Test Descriptions

Each of the following sub-sections defines the specification intent and the sample procedure for the

specifications listed in Mechanical and Electrical Specifications. Procedures may evolve in future drafts

of this document in order to better service the specification intents.

5.1 MCU Current

5.1.1 Intent

This is the average current consumption of the MCU executing the core Fusion routines. This is

obviously specific to the particular MCUs listed. This metric must be associated with a specific

hardware configuration similar to those defined earlier in this document. The Freedom Development

Platform was powered via the OpenSDA USB port for the results specified.

5.1.2 Procedure

1. This procedure uses modified versions of the standard demo build:

a. Measure (using the Sensor Fusion Toolbox) sysTick

fusion

which only includes time spent in the

core fusion routines. It does not include:

1) calls to magnetic calibration

2) reading sensor data

3) applying hardware abstraction layer

4) RTOS

5) Communications overhead

Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

2. Percentage of time spent in the core fusion routines = 100*sysTick

fusion

/ total_sysTicks

3. I

Current into the MCU is measured via power jumper on the board using a simple DVM

4. Fusion I

= MCU I

X percentage

5. All currents shown are in mA

6. Sample size = 1 board

For devices with floating point units, this may yield a somewhat optimistic number, as the computation

makes the assumption that all MCU instructions consume the same amount of power. In fact, we can

expect floating point instructions to consume a bit more.

5.2 Flash and RAM Required

5.2.1 Intent

These parameters are total RAM and flash memory required to implement and execute the Fusion

Library plus MQX-Lite RTOS. The projects for the binaries were created using both CodeWarrior and

Kinetis Design Studio. Values for Text, Data and BSS were read directly from the console window after

builds completed.

This includes space for code storage, static and dynamic (stack) variables. This metric must be

associated with a specific hardware configuration similar to those defined in earlier in this document.

5.2.2 Procedure

The text, data and bss sizes for each build were extracted using the technique outlined at MCU on

Eclipse; text, data and bss: Code and Data Size Explained.

1. text; includes the user code, the vector table plus constants.

2. data; is for initialized variables, and it counts for RAM and FLASH. The linker allocates the data in

FLASH which then is copied from ROM to RAM in the startup code.

3. bss; is for the uninitialized data in RAM which is initialized with zero in the startup code.

Refer to Computation Metrics for statistics gathered using the 5.00 build.

5.3 Fusion Loop Execution Time

This is simply CPU cycle time X sysTick

fusion

as measured in Section 5.1.

5.4 Compass Heading Linearity and Accuracy

5.4.1 Intent

Linearity is defined as the deviation of measured data from a least squares straight line approximation

of that data.

Absolute accuracy is defined as the maximum difference between measured and ideal values.

Which is simply the clock rate of the MCU divided by the sensor fusion rate (nominally 25)

Consult the user guide / schematic for your Freedom board to determine the specific jumper number

applicable to that board.

Test Descriptions

These two concepts are illustrated in

This metric must be stated specifically for a hardware configuration similar to those defined

this document.

Figure

5.4.2 Procedure

Heading Linearity

Setup as defined in

Matlab Stimulus/Expected Response + Hardware

post-process data.

Precondition the DUT by executing magnetic calibration trajectory leaving DUT in AZ = + 1

orientation (See

Matlab Stimulus/Expected Response + Hardware

2. Rotate DUT around the z-

axis from 0 to 360 degrees with an increment step of 10 degrees as

follows

Program rate table with desired steps and maximum velocity

Rotate tabletop by 10 degrees over 0.5 second per

b. Pause 0.5 seconds

c. Read orientation

d. Repeat steps a-

c above until 360 degrees is reached.

Absolute Heading Accuracy

These numbers are based on simulations that are idealized models. The real

be approximately 5 degrees.

Freescale

Sensor Fusion Library for Kinetis

Freescale

These two concepts are illustrated in

Figure 19.

This metric must be stated specifically for a hardware configuration similar to those defined

Figure

19. Nonlinearity vs. Absolute Accuracy

Matlab Stimulus/Expected Response + Hardware

based Fusion

Precondition the DUT by executing magnetic calibration trajectory leaving DUT in AZ = + 1

Matlab Stimulus/Expected Response + Hardware

based Fusion

axis from 0 to 360 degrees with an increment step of 10 degrees as

Program rate table with desired steps and maximum velocity

Rotate tabletop by 10 degrees over 0.5 second per

iod

c above until 360 degrees is reached.

These numbers are based on simulations that are idealized models. The real

world values will tend to

Sensor Fusion Library for Kinetis

MCUs, Rev. 0.7, 9/2015

Freescale

Semiconductor, Inc.

This metric must be stated specifically for a hardware configuration similar to those defined

earlier in

based Fusion

. Matlab is used to

Precondition the DUT by executing magnetic calibration trajectory leaving DUT in AZ = + 1

based Fusion

)

axis from 0 to 360 degrees with an increment step of 10 degrees as

world values will tend to

Freescale

Sensor Fusion Library for Kinetis MCUs

Freescale Semiconductor, Inc.

5.5

Orientation Static Drift

5.5.1 Intent

The maximum change in orientation observed for a DUT remaining motionless for 100 seconds.

5.5.2 Procedure

Setup as defined in

Matlab Stimulus/Expected Response + Hardware

post-process data.

This me

tric must be associated with a specific hardware configuration similar to those defined

in this document

. Matlab is used to record and post

Precondition the DUT by executing magnetic calibration trajectory leaving DUT in a given

orientation.

While the DUT remains in given orientation collect orientation samples for 120 seconds.

Plot and process the last 100 s of the test. Orientation static drift is the maximum angle change in

the measured rotation vectors.

4. Repeat steps 1-3 for all

6 major orientations of the development board as shown in

Figure

Sensor Fusion Library for Kinetis MCUs

, Rev. 0.7, 9/2015

Orientation Static Drift

The maximum change in orientation observed for a DUT remaining motionless for 100 seconds.

Matlab Stimulus/Expected Response + Hardware

based Fusion

tric must be associated with a specific hardware configuration similar to those defined

. Matlab is used to record and post

- process data.

Precondition the DUT by executing magnetic calibration trajectory leaving DUT in a given

While the DUT remains in given orientation collect orientation samples for 120 seconds.

Plot and process the last 100 s of the test. Orientation static drift is the maximum angle change in

6 major orientations of the development board as shown in

. Major orientations relative to gravity

The maximum change in orientation observed for a DUT remaining motionless for 100 seconds.

based Fusion

. Matlab is used to

tric must be associated with a specific hardware configuration similar to those defined

in earlier

Precondition the DUT by executing magnetic calibration trajectory leaving DUT in a given

While the DUT remains in given orientation collect orientation samples for 120 seconds.

Plot and process the last 100 s of the test. Orientation static drift is the maximum angle change in

6 major orientations of the development board as shown in

Figure 20.

Test Descriptions

32 Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

5.6 Orientation Static Noise

5.6.1 Intent

RMS noise as a function of orientation for a motionless DUT.

5.6.2 Procedure

This can be based upon data gathered for the orientation static drift test. The classic standard deviation

equation is used to compute the metric/value.

5.7 Orientation Dynamic Drift

5.7.1 Intent

Measure of the ability of fusion code to return to a known orientation after movement.

5.7.2 Procedure

Setup as defined in Matlab Stimulus/Expected Response + Hardware-based Fusion and in Figure 9.

Matlab is used to post-process data.

1. Precondition the DUT by executing magnetic calibration trajectory leaving DUT in a given

orientation.

2. Keep DUT in a given orientation motionless for 2 seconds.

3. Rotate DUT at 0.5 revolution/sec for 10 seconds around vertical axis.

4. Keep DUT in its last orientation motionless for 2 seconds.

5. Determine the initial orientation by averaging orientation samples from the initial motionless period

and the final orientation by averaging the samples from the final motionless period. The difference

between the two orientations is the orientation dynamic drift.

6. Repeat steps 1-5 for all six major orientations of the development board.

5.8 Maximum Angular Rate

5.8.1 Intent

This test determines the maximum rotation rate for which the filter is able to correctly track orientation.

5.8.2 Procedure

Setup as defined in Matlab Stimulus/Expected Response + Hardware-based Fusion. Matlab is used to

post-process data.

1. Rotate DUT around X axis five times starting at rotation rate 360 dps.

2. Plot the ideal simulated orientation together with the orientation samples calculated by Kalman

filter fusion algorithms: 9DOF and 6DOF Accelerometer + Gyro and notice if fusion data tracks the

ideal orientation.

3. Increase the rotation rate by 360 dps and repeat steps 1 and 2.

4. The highest angular rate at which the fusion algorithm orientation still tracks the ideal simulated

orientation is the maximum angular rate.

Freescale Sensor Fusion Library for Kinetis MCUs

Freescale Semiconductor, Inc.

5.9

Orientation Response Delay

5.9.1

Waveform Definitions

90° Input Change in Orientation

The 90° input orientation change waveform is defined as:

• From any starting orientation

• Through the center of mass

of the accelerometer

•

A change in one of roll, pitch or yaw (global frame)

• Orientation change = ±90°

•

Orientation change is linear in time

•

Transition period = 1.0 seconds

•

Propagation delays are measured from the 1/2 point (±45°)

Output Orientation Changes

When measuring changes in orientation, there are many ways to get from orientation A to orientation B.

It is assumed that output orientation changes should track input orientation changes. The Fusion

Library will inherently output those values. However, to

propagation delays, the 50% point in computed orientations changes is defined as shown in

Figure 21.

Propagation delays are measured at the plane that bi

5.9.2 Intent

Orientation response delay is measured from change in physical orientation to the related change in

fusion orientation output.

5.9.3 Procedure

Using 90° input orientation change as defined in

measured from the 50% point on the input wav

defined in

Output Orientation Changes

Freescale Sensor Fusion Library for Kinetis MCUs

, Rev. 0.7, 9/2015

Orientation Response Delay

Waveform Definitions

The 90° input orientation change waveform is defined as:

of the accelerometer

A change in one of roll, pitch or yaw (global frame)

Orientation change is linear in time

Transition period = 1.0 seconds

Propagation delays are measured from the 1/2 point (±45°)

When measuring changes in orientation, there are many ways to get from orientation A to orientation B.

It is assumed that output orientation changes should track input orientation changes. The Fusion

Library will inherently output those values. However, to

avoid any ambiguity when measuring

propagation delays, the 50% point in computed orientations changes is defined as shown in

Propagation delays are measured at the plane that bi

sects and is perpendicular to SLERP

Orientation response delay is measured from change in physical orientation to the related change in

Using 90° input orientation change as defined in

90° Input Change in Orientation

, the response delay is

measured from the 50% point on the input wav

eform to the 50% point of the output waveform as

Output Orientation Changes

When measuring changes in orientation, there are many ways to get from orientation A to orientation B.

It is assumed that output orientation changes should track input orientation changes. The Fusion

avoid any ambiguity when measuring

propagation delays, the 50% point in computed orientations changes is defined as shown in

Figure 21.

sects and is perpendicular to SLERP

A–B

Orientation response delay is measured from change in physical orientation to the related change in

, the response delay is

eform to the 50% point of the output waveform as

Test Descriptions

34 Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

5.10 Orientation Magnetic Immunity (Static Device)

5.10.1 Intent

The test response of the stationary DUT to momentary changes in the local magnetic field is used to

measure the orientation magnetic immunity. Because the device is stationary, the accelerometer and

gyroscope readings remain relatively constant, changing only due to sensor noise.

5.10.2 Procedure

Setup as defined in Matlab Stimulus/Expected Response + Hardware-based Fusion. Matlab is used to

post-process data.

1. Starting point = device stationary, fusion outputs stable

2. 100 µT magnet moving at 0.25 m/s

3. Closest approach to magnetic sensor = 5 cm

4. Test to be simulated using environment specified in Matlab Stimulus/Expected Response +

Hardware-based Fusion. Magnetic interference may be modeled as a time varying field which is

consistent with the description above.

5.11 Orientation Magnetic Immunity (Moving Device)

5.11.1 Intent

This test measures the immunity of a linearly, with no rotation, moving DUT to a 100 µT magnet change

in the magnetic field. The outputs of all acceleration and magnetic sensors change during this test.

Gyro outputs should be constant throughout, with any changes attributed to noise only.

5.11.2 Procedure

1. Starting point = device stationary, fusion outputs stable.

2. Use a 100 µT magnet.

3. The DUT moves by magnet at 0.25 m/s with the closest approach to magnet=5cm.

4. Test to be simulated using environment specified in Matlab Stimulus/Expected Response +

Hardware-based Fusion. Magnetic interference may be modeled as a location varying field which

is consistent with the description above.

5.12 Error in Computed Gyro Bias

5.12.1 Intent

Measure how well the fusion library tracks slowly varying gyro bias.

5.12.2 Procedure

Test to be simulated using environment specified in Matlab Stimulus/Expected Response + Hardware-

based Fusion.

1. Starting point = device stationary, fusion outputs stable

2. Add 10 dps gyro offset as step function

3. Run test until computed gyro offset stabilizes

Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

4. Note computed/actual for final value

5. Note response time

5.13 Gyro Offset Step Response

5.13.1 Intent

Measure how well the fusion library tracks varying gyro offset.

5.13.2 Procedure

Setup as defined in Matlab Stimulus/Expected Response + Hardware-based Fusion. Matlab is used to

post-process data.

1. Starting point = DUT is stationary and fusion outputs are stable.

2. Add offset of 10 dps to gyro X read data.

3. Run test until computed gyro offset stabilizes.

4. Plot the gyro read data step function and the response fusion algorithm estimated offset. Record

response time as time between 50% step change in gyro X read data and 50% change in fusion

algorithm estimated gyro X offset.

5.14 Error in Computed Linear Acceleration

5.14.1 Intent

Measure how well the fusion library tracks linear acceleration.

5.14.2 Procedure

Setup as defined in Matlab Stimulus/Expected Response + Hardware-based Fusion. Matlab is used to

post-process data.

1. Starting point = DUT is stationary and fusion outputs are stable.

2. Subject DUT to acceleration A*sin(2*pi*f*t), where: A = 2 g, f = 1 Hz, t = zero to one second

(1 period), pi = 3.141592654

3. Plot the ideal DUT acceleration and fusion algorithm computed acceleration. Determine the

maximum error between the two accelerations.

Revision history for FSFLK_DS

36 Freescale Sensor Fusion Library for Kinetis MCUs, Rev. 0.7, 9/2015

Freescale Semiconductor, Inc.

6 Revision history for FSFLK_DS

Rev. No. Date Description

0 12 Nov 2013 •ROUGH DRAFT ONLY - PRE-REVIEW

0.1 22 Nov 2013 •Preliminary draft includes updates from 1st review.

0.2 Feb 2014 •Initial public release.

0.3 Apr 2014 •Updated for licensing, software updates and board support changes.

0.4 May 2014 •Updated for software updates, additional (FRDM-K64F) board support changes and

electrical specs and computation metrics.

0.5 Sept 2014 •Updated Fusion Performance Metrics section by adding four new figures and tables.

•adjusted selected parametric values

•altered several Test Description procedures.

0.6 Sept 2014 •Separated out Computational Metrics section and various minor markups

•Changed Feature - License, option text.

•Feature Comparison Based on License Option, Added KDS to Product Deliverables row

•Moved sections 4.1, 4.1.1 & 4.1.2 and merged in 4.11

•Added xrefs from Electrical Specs tables to appropriate Test Description sections

•Adjusted Performance Metric tables, symbols and units in some cases

0.7 Sept 2015 •Updated for build 5.00 of the sensor fusion library. This version has completely

redesigned 6 and 9-axis Kalman filters.

•Updated all computation metrics.

•Removed outdated fusion time measurements.

•Added K22F for KDS. Added additional fusion options.

•Changed document name from XSFLK_DS to FSFLK_DS.

•Noted that MULTI-B boards have been replaced with MULT2-B boards.

Document Number: FSFLK_DS

Revision Rev. 0.7, 9/2015

How to Reach Us:

Home Page:

freescale.com

Web Support:

freescale.com/support

Information in this document is provided solely to enable system and

software implementers to use Freescale products. There are no express

or implied copyright licenses granted hereunder to design or fabricate any

integrated circuits based on the information in this document. Freescale

reserves the right to make changes without further notice to any products

herein.

Freescale makes no warranty, representation, or guarantee regarding the

suitability of its products for any particular purpose, nor does Freescale

assume any liability arising out of the application or use of any product or

circuit, and specifically disclaims any and all liability, including without

limitation consequential or incidental damages. “Typical” parameters that

may be provided in Freescale data sheets and/or specifications can and

do vary in different applications, and actual performance may vary over

time. All operating parameters, including “typicals,” must be validated for

each customer application by customer’s technical experts. Freescale

does not convey any license under its patent rights nor the rights of

others. Freescale sells products pursuant to standard terms and

conditions of sale, which can be found at the following address:

freescale.com/SalesTermsandConditions.

Freescale and the Freescale logo are trademarks of Freescale

Semiconductor, Inc., Reg. U.S. Pat. & Tm. Off. All other product or service

names are the property of their respective owners.

Mouser Electronics

Authorized Distributor

Click to View Pricing, Inventory, Delivery & Lifecycle Information:

Freescale Semiconductor:

FRDM-KL25Z FRDM-KL46Z FRDM-FXS-MULTI FRDM-KL26Z FRDM-K64F