2SD1314 TOSHIBA Transistor Silicon NPN Triple Diffused Type (Darlington Power Transistor) 2SD1314 High Power Switching Applications Motor Control Applications Unit: mm * High DC current gain: hFE = 100 (min) (VCE = 5 V, IC = 15 A) * Low saturation voltage: VCE (sat) = 2 V (max) (IC = 15 A, IB = 0.4 A) * High speed: tf = 3 s (max) (IC = 15 A) Absolute Maximum Ratings (Tc = 25C) Characteristics Symbol Rating Unit Collector-base voltage VCBO 600 V Collector-emitter voltage VCEO 450 V Emitter-base voltage VEBO 6 V DC IC 15 Pulse ICP 30 Base current IB 1.0 A JEDEC Collector power dissipation PC 150 W JEITA Tj 150 C Tstg -55 to 150 C Collector current Junction temperature Storage temperature range A TOSHIBA 2-21F1A Weight: 9.75 g (typ.) Note: Using continuously under heavy loads (e.g. the application of high temperature/current/voltage and the significant change in temperature, etc.) may cause this product to decrease in the reliability significantly even if the operating conditions (i.e. operating temperature/current/voltage, etc.) are within the absolute maximum ratings. Please design the appropriate reliability upon reviewing the Toshiba Semiconductor Reliability Handbook ("Handling Precautions"/Derating Concept and Methods) and individual reliability data (i.e. reliability test report and estimated failure rate, etc). Equivalent Circuit COLLECTOR BASE 300 100 EMITTER 1 http://store.iiic.cc/ 2006-11-21 2SD1314 Electrical Characteristics (Tc = 25C) Characteristics Symbol Test Condition Min Typ. Max Unit Collector cut-off current ICBO VCB = 600 V, IE = 0 1.0 mA Emitter cut-off current IEBO VEB = 6 V, IC = 0 200 mA V DC current gain VCEO (SUS) IC = 0.5 A, L = 40 mH 450 hFE VCE = 5 V, IC = 15 A 100 2.0 V 2.5 V 150 pF 1.0 12 3.0 Collector-emitter saturation voltage VCE (sat) Base-emitter saturation voltage VBE (sat) Collector output capacitance Cob VCB = 50 V, IE = 0, f = 1 MHz ton 50 s IB1 Turn-on time IC = 15 A, IB = 0.4 A Storage time 0 tstg IB2 Switching time Input IB1 IB2 Output 20 Collector-emitter sustaining voltage s VCC = 300 V Fall time tf IB1 = -IB2 = 0.4 A, duty cycle = 0.5% Marking Part No. (or abbreviation code) TOSHIBA 2SD1314 Lot No. JAPAN A line indicates lead (Pb)-free package or lead (Pb)-free finish. 2 http://store.iiic.cc/ 2006-11-21 2SD1314 VCE - IC VCE - IC 500 300 VCE (V) Common emitter Tc = 25C 100 50 30 IB = 0.05 A 0.1 PC = 150 W Collector-emitter voltage Collector-emitter voltage VCE (V) 300 500 0.2 10 0.4 0.6 5 3 1.0 1 0.5 0 5 10 15 20 Collector current IC 25 30 Tc = 100C 100 50 IB = 0.05 A 30 0.1 PC = 60 W 0.2 0.4 10 0.6 5 1.0 3 1 0.5 0 35 Common emitter 5 10 (A) VCE - IC Common emitter Tc = -40C (A) IB = 0.05 A Common emitter 1000 0.1 PC = 150 W DC current gain hFE VCE (V) Collector-emitter voltage 35 hFE - IC 0.2 30 0.4 10 0.6 5 1.0 3 VCE = 5 V 500 Tc = 100C 300 25 -40 100 50 30 1 0.5 0 5 10 15 20 Collector current IC 25 30 10 0.1 35 0.3 (A) 1 100 Common emitter 50 30 (A) IB = 0.4 A 30 Common emitter VCC = 300 V IB = 0.4 A Tc = 25C Switching time (s) 10 5 3 Tc = -40C 100 10 Switching time - IC VBE (sat) - IC 1 3 Collector current IC 30 Base-emitter saturation voltage VBE (sat) (V) 30 2000 300 50 25 Collector current IC 500 100 20 15 25 tstg 10 5 3 1 tf 0.5 0.5 0.3 ton 0.3 0.1 0.3 1 3 Collector current IC 10 0.1 0 30 (A) 2 4 6 8 10 Collector current IC 3 http://store.iiic.cc/ 12 14 16 (A) 2006-11-21 2SD1314 Safe Operating Area 50 30 IC max (pulsed)* 50 s* Collector current IC (A) 100 s* 10 IC max (continuous) 1 ms* 500 s* 5 3 10 ms* DC operation Tc = 25C 1 0.5 0.3 0.1 3 VCEO max *: Single nonrepetitive pulse Tc = 25C Curves must be derated linearly with increase in temperature. 10 30 100 300 Collector-emitter voltage VCE (V) 4 http://store.iiic.cc/ 2006-11-21 2SD1314 RESTRICTIONS ON PRODUCT USE 20070701-EN * The information contained herein is subject to change without notice. * TOSHIBA is continually working to improve the quality and reliability of its products. Nevertheless, semiconductor devices in general can malfunction or fail due to their inherent electrical sensitivity and vulnerability to physical stress. It is the responsibility of the buyer, when utilizing TOSHIBA products, to comply with the standards of safety in making a safe design for the entire system, and to avoid situations in which a malfunction or failure of such TOSHIBA products could cause loss of human life, bodily injury or damage to property. In developing your designs, please ensure that TOSHIBA products are used within specified operating ranges as set forth in the most recent TOSHIBA products specifications. Also, please keep in mind the precautions and conditions set forth in the "Handling Guide for Semiconductor Devices," or "TOSHIBA Semiconductor Reliability Handbook" etc. * The TOSHIBA products listed in this document are intended for usage in general electronics applications (computer, personal equipment, office equipment, measuring equipment, industrial robotics, domestic appliances, etc.).These TOSHIBA products are neither intended nor warranted for usage in equipment that requires extraordinarily high quality and/or reliability or a malfunction or failure of which may cause loss of human life or bodily injury ("Unintended Usage"). Unintended Usage include atomic energy control instruments, airplane or spaceship instruments, transportation instruments, traffic signal instruments, combustion control instruments, medical instruments, all types of safety devices, etc.. Unintended Usage of TOSHIBA products listed in his document shall be made at the customer's own risk. * The products described in this document shall not be used or embedded to any downstream products of which manufacture, use and/or sale are prohibited under any applicable laws and regulations. * The information contained herein is presented only as a guide for the applications of our products. No responsibility is assumed by TOSHIBA for any infringements of patents or other rights of the third parties which may result from its use. No license is granted by implication or otherwise under any patents or other rights of TOSHIBA or the third parties. * Please contact your sales representative for product-by-product details in this document regarding RoHS compatibility. Please use these products in this document in compliance with all applicable laws and regulations that regulate the inclusion or use of controlled substances. Toshiba assumes no liability for damage or losses occurring as a result of noncompliance with applicable laws and regulations. 5 http://store.iiic.cc/ 2006-11-21