595D www.vishay.com Vishay Sprague Solid Tantalum Chip Capacitors TANTAMOUNT(R), Conformal Coated, Maximum CV FEATURES * Large capacitance rating range * Terminations: 100 % tin (2) standard tin/lead available * Mounting: Surface mount * 8 mm, 12 mm tape and reel packaging available per EIA 481 and reeling per IEC 60286-3. 7" [178 mm] standard. 13" [330 mm] available. * Case code compatibility with EIA 535BAAC and CECC 30801 * Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 Note * Lead (Pb)-containing terminations are not RoHS-compliant. Exemptions may apply. PERFORMANCE CHARACTERISTICS www.vishay.com/doc?40088 Operating Temperature: - 55 C to + 85 C (to + 125 C with voltage derating) Capacitance Range: 0.1 F to 1500 F Capacitance Tolerance: 10 %, 20 % standard Voltage Rating: 4 VDC to 50 VDC ORDERING INFORMATION 595D 106 X0 010 A 2 T TYPE CAPACITANCE CAPACITANCE TOLERANCE DC VOLTAGE RATING AT + 85 C CASE CODE TERMINATION REEL SIZE AND PACKAGING This is expressed in pF. The first two digits are the significant figures. The third is the number of zeros to follow. X0 = 20 % X9 = 10 % This is expressed in V. To complete the three-digit block, zeros precede the voltage rating. A decimal point is indicated by an "R" (6R3 = 6.3 V). See Ratings and Case Codes table 2 = 100 % tin 4 = Gold plated 8 = Solder plated (60/40) Special order Tape and reel T = 7" [178 mm] reel W = 13" [330 mm] reel Note * Preferred tolerances and reel sizes are in bold. We reserve the right to substitute form-fit-function replacement products with higher voltage rating, tighter capacitance tolerance, lower ESR (e.g., 594D series), or increased reliability screening (T95 series). DIMENSIONS in inches [millimeters] Tantalum wire nib identifies anode (+) terminal W L MAX. D REF. B J MAX. J MAX. A H CASE CODE T S A M B C G D R L MAX. 0.087 [2.2] 0.134 [3.4] 0.146 [3.7] 0.142 [3.6] 0.157 [4.0] 0.280 [7.1] 0.220 [5.6] 0.295 [7.5] 0.283 [7.2] W 0.043 0.012 [1.1 0.3] 0.067 0.008 [1.7 0.2] 0.071 0.012 [1.8 0.3] 0.106 0.012 [2.7 0.3] 0.110 + 0.012/- 0.016 [2.8 + 0.3/- 0.4] 0.126 0.012 [3.2 0.3] 0.144 0.016 [3.65 0.4] 0.169 + 0.012/- 0.024 [4.3 + 0.3/- 0.6] 0.236 + 0.012/- 0.024 [6.0 + 0.3/- 0.6] H 0.043 0.012 [1.1 0.3] 0.051 0.008 [1.3 0.3] 0.055 0.012 [1.4 0.3] 0.067 0.012 [1.7 0.3] 0.075 + 0.012/- 0.024 [1.9 + 0.3/- 0.6] 0.098 0.012 [2.5 0.3] 0.087 [2.2 max.] 0.110 0.012 [2.8 0.3] 0.138 + 0.012/- 0.016 [3.5 + 0.3/- 0.4] A 0.016 0.008 [0.4 0.2] 0.031 0.012 [0.8 0.3] 0.031 0.012 [0.8 0.3] 0.031 0.012 [0.8 0.3] 0.031 0.012 [0.8 0.3] 0.051 0.012 [1.3 0.3] 0.051 0.012 [1.3 0.3] 0.051 0.012 [1.3 0.3] 0.051 0.012 [1.3 0.3] B 0.042 0.001 [1.07 0.25] 0.079 0.012 [2.0 0.3] 0.087 0.016 [2.2 0.4] 0.079 0.012 [2.0 0.3] 0.098 0.016 [2.5 0.4] 0.181 0.024 [4.6 0.6] 0.134 0.016 [3.4 0.4] 0.181 0.024 [4.6 0.6] 0.181 0.024 [4.6 0.6] D REF. 0.063 [1.6] 0.087 [2.2] 0.115 [2.9] 0.253 [6.4] 0.138 [3.5] 0.236 [6.0] 0.236 [6.0] 0.252 [6.4] 0.244 [6.2] J MAX. 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] 0.004 [0.1] Note * The anode termination (D less B) will be a minimum of 0.012" [0.3 mm]. T case = 0.005" [0.13 mm] minimum. Revision: 30-May-12 Document Number: 40007 1 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 595D www.vishay.com Vishay Sprague RATINGS AND CASE CODES F 0.10 0.15 0.22 0.33 0.47 0.68 1.0 1.5 2.2 3.3 4.7 6.8 10 15 22 33 47 68 100 120 150 180 220 270 330 390 470 560 680 1000 1500 4V 6.3 V 10 V 16 V 20 V 25 V 35 V T A A A A/B B B/C B/C C D C/D D/R R R T T T T/A A T/A A A A/B S/A/B/C A/B A/B M/B/C C D D C/G/D T T T/A A A/B A A A/B C B/C D C/D C/D C D C/R C/D/R R D/R R R R D R R T A T/A A A A/B A/B A/B B /C B/C B/C/D C/D C/D D/R C/D/R R D/R R R T T/A T A A A/B A/B M/B B/C B/C C/D C/D/R R D/R R R A A A/B B B/C B/C B/C C C/D C/D D/R D/R R A A A/B A/B B B B/C C/D C/D/R D/R R R R 50 V T T T/A A A A/B A/B B/C B/C C C C/D D/R R R R R STANDARD RATINGS CAPACITANCE (F) CASE CODE 4.7 6.8 10 10 15 33 33 47 68 100 100 120 150 150 180 220 220 T T T A A A B A A A B C B C D C D PART NUMBER MAX. DCL AT + 25 C (A) MAX. DF AT + 25 C 120 Hz (%) 4 VDC AT + 85 C, 2.7 VDC AT + 125 C 595D475(1)004T(2)(3) 0.5 595D685(1)004T(2)(3) 0.5 595D106(1)004T(2)(3) 0.5 595D106(1)004A(2)(3) 0.5 595D156(1)004A(2)(3) 0.6 595D336(1)004A(2)(3) 1.3 595D336(1)004B(2)(3) 1.3 595D476(1)004A(2)(3) 1.9 595D686(1)004A(2)(3) 2.7 595D107(1)004A(2)(3) 4.0 595D107(1)004B(2)(3) 4.0 595D127(1)004C(2)(3) 4.8 595D157(1)004B(2)(3) 6.0 595D157(1)004C(2)(3) 6.0 595D187(1)004D(2)(3) 7.2 595D227(1)004C(2)(3) 8.8 595D227(1)004D(2)(3) 8.8 6 6 6 6 6 6 6 6 6 12 8 8 8 8 8 8 8 MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 7.80 7.80 7.80 1.90 1.40 1.40 0.47 1.40 1.30 0.60 0.45 0.19 0.45 0.18 0.14 0.18 0.14 0.06 0.06 0.06 0.20 0.23 0.23 0.43 0.23 0.24 0.35 0.43 0.76 0.43 0.78 1.04 0.78 1.04 Note * Part number definitions: (1) Tolerance: For 10 % tolerance, specify "X9"; for 20 % tolerance, change to "X0" (2) Termination: For 100 % tin specify "2"; for gold plated specify "4", for solder plated 60/40 specify "8" (3) Packaging code: For 7" reels specify "T", for 13" reels specify "W" Revision: 30-May-12 Document Number: 40007 2 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 595D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (F) CASE CODE PART NUMBER 270 270 330 390 470 470 680 1000 1500 C D C D C R D R R 595D277(1)004C(2)(3) 595D277(1)004D(2)(3) 595D337(1)004C(2)(3) 595D397(1)004D(2)(3) 595D477(1)004C(2)(3) 595D477(1)004R(2)(3) 595D687(1)004D(2)(3) 595D108(1)004R(2)(3) 595D158(1)004R(2)(3) 3.3 3.3 4.7 6.8 6.8 10 15 22 22 33 33 33 33 47 47 68 68 100 100 100 120 150 180 220 220 220 330 330 330 390 470 470 560 680 1000 T A A T A A A A B S A B C A B A B M B C C D D C G D C D R R D R R R R 595D335(1)6R3T(2)(3) 595D335(1)6R3A(2)(3) 595D475(1)6R3A(2)(3) 595D685(1)6R3T(2)(3) 595D685(1)6R3A(2)(3) 595D106(1)6R3A(2)(3) 595D156(1)6R3A(2)(3) 595D226(1)6R3A(2)(3) 595D226(1)6R3B(2)(3) 595D336(1)6R3S(2)(3) 595D336(1)6R3A(2)(3) 595D336(1)6R3B(2)(3) 595D336(1)6R3C(2)(3) 595D476(1)6R3A(2)(3) 595D476(1)6R3B(2)(3) 595D686(1)6R3A(2)(3) 595D686(1)6R3B(2)(3) 595D107(1)6R3M(2)(3) 595D107(1)6R3B(2)(3) 595D107(1)6R3C(2)(3) 595D127(1)6R3C(2)(3) 595D157(1)6R3D(2)(3) 595D187(1)6R3D(2)(3) 595D227(1)6R3C(2)(3) 595D227(1)6R3G(2)(3) 595D227(1)6R3D(2)(3) 595D337(1)6R3C(2)(3) 595D337(1)6R3D(2)(3) 595D337(1)6R3R(2)(3) 595D397(1)6R3R(2)(3) 595D477(1)6R3D(2)(3) 595D477(1)6R3R(2)(3) 595D567(1)6R3R(2)(3) 595D687(1)6R3R(2)(3) 595D108(1)6R3R(2)(3) MAX. DCL AT + 25 C (A) MAX. DF AT + 25 C 120 Hz (%) MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 8 8 8 8 10 10 12 16 20 0.17 0.13 0.17 0.13 0.16 0.13 0.13 0.07 0.07 0.80 1.07 0.80 1.07 0.83 1.39 1.07 1.89 1.89 6 6 6 6 6 6 6 6 6 8 6 5 9 6 5 12 6 14 8 8 8 8 8 8 8 8 8 8 8 8 8 10 10 10 16 8.50 3.80 3.80 8.50 3.60 1.90 1.70 1.70 0.57 1.30 1.70 0.57 0.29 1.50 0.57 0.50 0.55 0.40 0.55 0.20 0.19 0.50 0.14 0.18 0.18 0.14 0.17 0.14 0.13 0.13 0.13 0.12 0.11 0.09 0.07 0.06 0.14 0.14 0.06 0.14 0.20 0.21 0.21 0.39 0.21 0.21 0.39 0.62 0.22 0.39 0.39 0.39 0.49 0.39 0.74 0.76 0.55 1.04 0.78 0.80 1.04 0.80 1.04 1.39 1.39 1.07 1.44 1.51 1.67 1.89 4 VDC AT + 85 C, 2.7 VDC AT + 125 C 10.8 10.8 13.2 15.6 18.8 18.8 27.2 40.0 60.0 6.3 VDC AT + 85 C, 4 VDC AT + 125 C 0.5 0.5 0.5 0.5 0.5 0.6 0.9 1.4 1.4 2.1 2.1 2.1 2.1 2.8 2.8 4.3 4.3 6.3 6.3 6.3 7.6 9.5 11.3 13.9 13.9 13.9 20.8 20.8 20.8 24.6 29.6 29.6 35.3 42.8 63.0 Note * Part number definitions: (1) Tolerance: For 10 % tolerance, specify "X9"; for 20 % tolerance, change to "X0" (2) Termination: For 100 % tin specify "2"; for gold plated specify "4", for solder plated 60/40 specify "8" (3) Packaging code: For 7" reels specify "T", for 13" reels specify "W" Revision: 30-May-12 Document Number: 40007 3 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 595D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (F) CASE CODE PART NUMBER 2.2 3.3 4.7 4.7 6.8 10 15 15 22 22 33 33 47 47 68 68 100 100 100 120 120 150 150 180 180 220 220 220 270 330 330 390 470 680 T A T A A A A B A B A B B C B C B C D C D C D D R C D R R D R R R R 595D225(1)010T(2)(3) 595D335(1)010A(2)(3) 595D475(1)010T(2)(3) 595D475(1)010A(2)(3) 595D685(1)010A(2)(3) 595D106(1)010A(2)(3) 595D156(1)010A(2)(3) 595D156(1)010B(2)(3) 595D226(1)010A(2)(3) 595D226(1)010B(2)(3) 595D336(1)010A(2)(3) 595D336(1)010B(2)(3) 595D476(1)010B(2)(3) 595D476(1)010C(2)(3) 595D686(1)010B(2)(3) 595D686(1)010C(2)(3) 595D107(1)010B(2)(3) 595D107(1)010C(2)(3) 595D107(1)010D(2)(3) 595D127(1)010C(2)(3) 595D127(1)010D(2)(3) 595D157(1)010C(2)(3) 595D157(1)010D(2)(3) 595D187(1)010D(2)(3) 595D187(1)010R(2)(3) 595D227(1)010C(2)(3) 595D227(1)010D(2)(3) 595D227(1)010R(2)(3) 595D277(1)010R(2)(3) 595D337(1)010D(2)(3) 595D337(1)010R(2)(3) 595D397(1)010R(2)(3) 595D477(1)010R(2)(3) 595D687(1)010R(2)(3) 1.5 2.2 2.2 3.3 4.7 6.8 10 10 15 15 T T A T A A A B A B 595D155(1)016T(2)(3) 595D225(1)016T(2)(3) 595D225(1)016A(2)(3) 595D335(1)016T(2)(3) 595D475(1)016A(2)(3) 595D685(1)016A(2)(3) 595D106(1)016A(2)(3) 595D106(1)016B(2)(3) 595D156(1)016A(2)(3) 595D156(1)016B(2)(3) MAX. DCL AT + 25 C (A) MAX. DF AT + 25 C 120 Hz (%) MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 6 6 6 6 6 6 6 6 6 8 6 6 6 6 6 12 8 7 7 8 8 8 7 8 8 8 8 8 8 8 8 8 14 8.60 3.80 8.60 3.60 3.60 1.90 1.80 0.67 1.80 1.90 3.00 1.90 0.65 0.30 0.65 0.24 0.40 0.20 0.15 0.22 0.14 0.22 0.14 0.38 0.13 0.20 0.14 0.13 0.13 0.14 0.13 0.12 0.12 0.09 0.06 0.14 0.06 0.14 0.14 0.20 0.20 0.36 0.20 0.21 0.16 0.21 0.36 0.61 0.36 0.68 0.46 0.74 1.00 0.71 1.04 0.71 1.04 0.63 1.39 0.74 1.04 1.39 1.39 1.04 1.39 1.44 1.44 1.67 6 6 5 6 6 6 6 6 6 6 8.70 8.70 3.90 8.60 2.90 2.80 2.50 0.76 2.40 0.75 0.06 0.06 0.14 0.06 0.16 0.16 0.17 0.33 0.18 0.34 10 VDC AT + 85 C, 7 VDC AT + 125 C 0.5 0.5 0.5 0.5 0.7 1.0 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 6.8 6.8 10.0 10.0 8.0 12.0 12.0 15.0 15.0 18.0 18.0 22.0 22.0 22.0 27.0 33.0 33.0 39.0 47.0 68.0 16 VDC AT + 85 C, 10 VDC AT + 125 C 0.5 0.5 0.5 0.5 0.8 1.1 1.6 1.6 2.4 2.4 Note * Part number definitions: (1) Tolerance: For 10 % tolerance, specify "X9"; for 20 % tolerance, change to "X0" (2) Termination: For 100 % tin specify "2"; for gold plated specify "4", for solder plated 60/40 specify "8" (3) Packaging code: For 7" reels specify "T", for 13" reels specify "W" Revision: 30-May-12 Document Number: 40007 4 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 595D www.vishay.com Vishay Sprague STANDARD RATINGS CAPACITANCE (F) CASE CODE 22 22 33 33 47 47 68 68 100 100 100 120 150 150 180 220 330 M B B C B C C D C D R R D R R R R 0.68 1.0 2.2 3.3 4.7 4.7 6.8 6.8 10 15 22 22 47 47 68 68 68 100 100 120 150 180 T T A A A B A B B B B C C D C D R D R R R R 0.47 1.0 1.5 2.2 2.2 3.3 T A A A B B PART NUMBER MAX. DCL AT + 25 C (A) MAX. DF AT + 25 C 120 Hz (%) 16 VDC AT + 85 C, 10 VDC AT + 125 C 595D226(1)016M(2)(3) 3.5 595D226(1)016B(2)(3) 3.5 595D336(1)016B(2)(3) 5.3 595D336(1)016C(2)(3) 5.3 595D476(1)016B(2)(3) 7.5 595D476(1)016C(2)(3) 7.5 595D686(1)016C(2)(3) 10.9 595D686(1)016D(2)(3) 10.9 595D107(1)016C(2)(3) 16.0 595D107(1)016D(2)(3) 16.0 595D107(1)016R(2)(3) 16.0 595D127(1)016R(2)(3) 19.2 595D157(1)016D(2)(3) 24.0 595D157(1)016R(2)(3) 24.0 595D187(1)016R(2)(3) 28.8 595D227(1)016R(2)(3) 35.2 595D337(1)016R(2)(3) 52.8 20 VDC AT + 85 C, 13 VDC AT + 125 C 595D684(1)020T(2)(3) 0.5 595D105(1)020T(2)(3) 0.5 595D225(1)020A(2)(3) 0.5 595D335(1)020A(2)(3) 0.7 595D475(1)020A(2)(3) 0.9 595D475(1)020B(2)(3) 0.9 595D685(1)020A(2)(3) 1.4 595D685(1)020B(2)(3) 1.4 595D106(1)020B(2)(3) 2.0 595D156(1)020B(2)(3) 3.0 595D226(1)020B(2)(3) 4.4 595D226(1)020C(2)(3) 4.4 595D476(1)020C(2)(3) 9.4 595D476(1)020D(2)(3) 9.4 595D686(1)020C(2)(3) 13.6 595D686(1)020D(2)(3) 13.6 595D686(1)020R(2)(3) 13.6 595D107(1)020D(2)(3) 20.0 595D107(1)020R(2)(3) 20.0 595D127(1)020R(2)(3) 24.0 595D157(1)020R(2)(3) 30.0 595D187(1)020R(2)(3) 36.0 25 VDC AT + 85 C, 17 VDC AT + 125 C 595D474(1)025T(2)(3) 0.5 595D105(1)025A(2)(3) 0.5 595D155(1)025A(2)(3) 0.5 595D225(1)025A(2)(3) 0.6 595D225(1)025B(2)(3) 0.6 595D335(1)025B(2)(3) 0.8 MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 6 6 6 6 6 6 6 8 8 8 8 8 8 8 8 14 0.50 0.75 0.72 0.29 0.72 0.28 0.26 0.14 0.27 0.14 0.14 0.14 0.14 0.13 0.13 0.12 0.11 0.44 0.34 0.34 0.62 0.34 0.63 0.65 1.04 0.64 1.04 1.30 1.34 1.04 1.39 1.39 1.44 1.51 4 4 6 6 6 6 6 6 6 6 6 6 6 6 6 6 6 8 8 8 8 8 10.80 9.00 3.80 3.80 3.10 0.95 3.00 0.95 1.00 1.00 0.90 0.38 0.35 0.19 0.19 0.19 0.20 0.18 0.14 0.14 0.14 0.14 0.05 0.06 0.14 0.14 0.16 0.30 0.16 0.30 0.29 0.29 0.31 0.54 0.56 0.89 0.76 0.89 1.12 0.91 1.34 1.34 1.34 1.34 4 4 6 6 6 6 13.50 4.20 3.80 3.80 2.30 1.90 0.05 0.13 0.14 0.14 0.19 0.21 Note * Part number definitions: (1) Tolerance: For 10 % tolerance, specify "X9"; for 20 % tolerance, change to "X0" (2) Termination: For 100 % tin specify "2"; for gold plated specify "4", for solder plated 60/40 specify "8" (3) Packaging code: For 7" reels specify "T", for 13" reels specify "W" Revision: 30-May-12 Document Number: 40007 5 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 595D www.vishay.com Vishay Sprague STANDARD RATINGS MAX. DCL AT + 25 C (A) CAPACITANCE (F) CASE CODE PART NUMBER 4.7 B 595D475(1)025B(2)(3) 1.2 4.7 C 595D475(1)025C(2)(3) 1.3 6.8 B 595D685(1)025B(2)(3) 1.7 6.8 C 595D685(1)025C(2)(3) 1.7 MAX. DF AT + 25 C 120 Hz (%) MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 6 1.80 0.22 5 0.68 0.40 6 1.50 0.24 6 0.63 0.42 25 VDC AT + 85 C, 17 VDC AT + 125 C 10 B 595D106(1)025B(2)(3) 2.5 6 1.50 0.24 10 C 595D106(1)025C(2)(3) 2.5 6 0.57 0.44 15 C 595D156(1)025C(2)(3) 3.8 6 0.56 0.44 22 C 595D226(1)025C(2)(3) 5.5 6 0.50 0.47 22 D 595D226(1)025D(2)(3) 5.5 6 0.28 0.73 33 C 595D336(1)025C(2)(3) 8.3 6 0.45 0.49 33 D 595D336(1)025D(2)(3) 8.3 6 0.27 0.75 47 D 595D476(1)025D(2)(3) 11.8 6 0.26 0.76 1.12 47 R 595D476(1)025R(2)(3) 11.8 6 0.20 68 D 595D686(1)025D(2)(3) 17.0 8 0.26 0.76 68 R 595D686(1)025R(2)(3) 17.0 6 0.20 1.12 100 R 595D107(1)025R(2)(3) 25.0 8 0.20 1.12 35 VDC AT + 85 C, 23 VDC AT + 125 C 0.33 T 595D334(1)035T(2)(3) 0.5 4 14.40 0.05 0.47 A 595D474(1)035A(2)(3) 0.5 4 4.30 0.13 0.68 A 595D684(1)035A(2)(3) 0.5 4 4.20 0.13 1.0 A 595D105(1)035A(2)(3) 0.5 4 4.10 0.14 1.5 A 595D155(1)035A(2)(3) 0.5 6 3.80 0.14 1.5 B 595D155(1)035B(2)(3) 0.5 6 2.80 0.17 2.2 B 595D225(1)035B(2)(3) 0.8 6 2.30 0.19 3.3 B 595D335(1)035B(2)(3) 1.2 6 2.40 0.19 3.3 C 595D335(1)035C(2)(3) 1.2 6 0.75 0.38 4.7 B 595D475(1)035B(2)(3) 1.6 6 2.20 0.20 4.7 C 595D475(1)035C(2)(3) 1.6 6 0.66 0.41 6.8 C 595D685(1)035C(2)(3) 2.4 6 0.63 0.42 10 D 595D106(1)035D(2)(3) 3.5 6 0.43 0.59 15 C 595D156(1)035C(2)(3) 5.3 6 0.60 0.43 15 D 595D156(1)035D(2)(3) 5.3 6 0.41 0.60 22 D 595D226(1)035D(2)(3) 7.7 6 0.32 0.68 22 R 595D226(1)035R(2)(3) 7.7 6 0.28 0.94 33 R 595D336(1)035R(2)(3) 11.6 6 0.28 0.94 47 R 595D476(1)035R(2)(3) 16.5 6 0.28 0.94 0.10 T 595D104(1)050T(2)(3) 0.5 4 22.50 0.04 0.15 T 595D154(1)050T(2)(3) 0.5 4 18.00 0.04 50 VDC AT + 85 C, 33 VDC AT + 125 C 0.22 T 595D224(1)050T(2)(3) 0.5 4 15.30 0.04 0.22 A 595D224(1)050A(2)(3) 0.5 4 9.00 0.09 0.33 A 595D334(1)050A(2)(3) 0.5 4 8.10 0.10 Note * Part number definitions: (1) Tolerance: For 10 % tolerance, specify "X9"; for 20 % tolerance, change to "X0" (2) Termination: For 100 % tin specify "2"; for gold plated specify "4", for solder plated 60/40 specify "8" (3) Packaging code: For 7" reels specify "T", for 13" reels specify "W" Revision: 30-May-12 Document Number: 40007 6 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 595D www.vishay.com Vishay Sprague STANDARD RATINGS MAX. ESR AT + 25 C 100 kHz () MAX. RIPPLE 100 kHz IRMS (A) 4 7.20 0.10 4 6.10 0.11 0.5 4 5.40 0.13 595D105(1)050A(2)(3) 0.5 4 6.00 0.11 B 595D105(1)050B(2)(3) 0.5 4 5.00 0.13 B 595D155(1)050B(2)(3) 0.8 6 4.10 0.14 C 595D155(1)050C(2)(3) 0.8 6 1.80 0.25 MAX. DCL AT + 25 C (A) CAPACITANCE (F) CASE CODE PART NUMBER 0.47 A 595D474(1)050A(2)(3) 0.5 0.68 A 595D684(1)050A(2)(3) 0.5 0.68 B 595D684(1)050B(2)(3) 1.0 A 1.0 1.5 1.5 MAX. DF AT + 25 C 120 Hz (%) 50 VDC AT + 85 C, 33 VDC AT + 125 C 2.2 B 595D225(1)050B(2)(3) 1.1 6 3.20 0.16 2.2 C 595D225(1)050C(2)(3) 1.1 6 1.70 0.25 3.3 C 595D335(1)050C(2)(3) 1.7 6 1.60 0.26 4.7 C 595D475(1)050C(2)(3) 2.4 6 1.40 0.28 6.8 C 595D685(1)050C(2)(3) 3.4 6 1.30 0.29 0.43 6.8 D 595D685(1)050D(2)(3) 3.4 6 0.82 10 D 595D106(1)050D(2)(3) 5.0 6 0.80 0.43 10 R 595D106(1)050R(2)(3) 5.0 6 0.65 0.62 15 R 595D156(1)050R(2)(3) 7.5 6 0.40 0.79 22 R 595D226(1)050R(2)(3) 11.0 6 0.39 0.80 Note * Part number definitions: (1) Tolerance: For 10 % tolerance, specify "X9"; for 20 % tolerance, change to "X0" (2) Termination: For 100 % tin specify "2"; for gold plated specify "4", for solder plated 60/40 specify "8" (3) Packaging code: For 7" reels specify "T", for 13" reels specify "W" RECOMMENDED VOLTAGE DERATING GUIDELINES (for temperature below + 85 C) STANDARD CONDITIONS. FOR EXAMPLE: OUTPUT FILTERS Capacitor Voltage Rating Operating Voltage 4.0 2.5 6.3 3.6 10 6.0 16 10 20 12 25 15 35 24 50 28 SEVERE CONDITIONS. FOR EXAMPLE: INPUT FILTERS Revision: 30-May-12 Capacitor Voltage Rating Operating Voltage 4.0 2.5 6.3 3.3 10 5.0 16 8.0 20 10 25 12 35 15 50 24 Document Number: 40007 7 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 595D www.vishay.com Vishay Sprague TYPICAL CURVES AT + 25 C, IMPEDANCE AND ESR VS. FREQUENCY "A" Case "T" Case IMPEDANCE 10 000 IMPEDANCE 1000 ESR ESR 100 1000 0.1 F, 50 VDC 100 10 3.3 F, 6.3 VDC 1.0 100 1K 1 F, 35 VDC 10 15 F, 6.3 VDC 1.0 10K 100K FREQUENCY IN Hz 1M 0.1 100 10M 1K 10K 100K FREQUENCY IN Hz 1M 10M "C" Case "B" Case 1000 1000 IMPEDANCE IMPEDANCE 100 ESR 100 ESR 10 10 2.2 F, 35 VDC 1.0 1 10 F, 25 VDC 100 F, 6.3 VDC 0.1 22 F, 6.3 VDC 0.1 100 0.01 1K 10K 100K FREQUENCY IN Hz 1M 10M 100 1K "D" Case 10K 100K FREQUENCY IN Hz 1M 10M "R" Case 100 100 IMPEDANCE 10 IMPEDANCE 10 ESR 1.0 ESR 1.0 22 F, 25 VDC 0.01 100 33 F, 35 VDC 390 F, 6.3 VDC 220 F, 6.3 VDC 0.1 0.1 0.01 1K Revision: 30-May-12 10K 100K FREQUENCY IN Hz 1M 10M 100 1K 10K 100K FREQUENCY IN Hz 1M 10M Document Number: 40007 8 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 595D www.vishay.com Vishay Sprague POWER DISSIPATION CASE CODE MAXIMUM PERMISSIBLE POWER DISSIPATION AT + 25 C (W) IN FREE AIR A 0.075 B 0.085 C 0.110 D 0.150 G 0.115 M 0.095 R 0.250 S 0.060 T 0.030 STANDARD PACKAGING QUANTITY CASE CODE UNITS PER REEL 7" REEL 13" REEL A 2000 9000 B 2000 8000 C 500 3000 D 500 2500 G 500 2500 M 2000 8000 R 600 n/a S 2500 10 000 T 2500 10 000 PRODUCT INFORMATION Conformal Coated Guide www.vishay.com/doc?40150 Moisture Sensitivity www.vishay.com/doc?40135 SELECTOR GUIDES Solid Tantalum Selector Guide www.vishay.com/doc?49053 Solid Tantalum Chip Capacitors www.vishay.com/doc?40091 FAQ Frequently Asked Questions Revision: 30-May-12 www.vishay.com/doc?40110 Document Number: 40007 9 For technical questions, contact: tantalum@vishay.com THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, "Vishay"), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay's knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer's responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer's technical experts. Product specifications do not expand or otherwise modify Vishay's terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000