Notice for TAIYO YUDEN products Please read this notice before using the TAIYO YUDEN products. REMINDERS Product information in this catalog is as of October 2009. All of the contents specified herein are subject to change without notice due to technical improvements, etc. Therefore, please check for the latest information carefully before practical application or usage of the Products. Please note that Taiyo Yuden Co., Ltd. shall not be responsible for any defects in products or equipment incorporating such products, which are caused under the conditions other than those specified in this catalog or individual specification. Please contact Taiyo Yuden Co., Ltd. for further details of product specifications as the individual specification is available. Please conduct validation and verification of products in actual condition of mounting and operating environment before commercial shipment of the equipment. All electronic components or functional modules listed in this catalog are developed, designed and intended for use in general electronics equipment.(for AV, office automation, household, office supply, information service, telecommunications, (such as mobile phone or PC) etc.). Before incorporating the components or devices into any equipment in the field such as transportation,( automotive control, train control, ship control), transportation signal, disaster prevention, medical, public information network (telephone exchange, base station) etc. which may have direct influence to harm or injure a human body, please contact Taiyo Yuden Co., Ltd. for more detail in advance. Do not incorporate the products into any equipment in fields such as aerospace, aviation, nuclear control, submarine system, military, etc. where higher safety and reliability are especially required. In addition, even electronic components or functional modules that are used for the general electronic equipment, if the equipment or the electric circuit require high safety or reliability function or performances, a sufficient reliability evaluation check for safety shall be performed before commercial shipment and moreover, due consideration to install a protective circuit is strongly recommended at customer's design stage. The contents of this catalog are applicable to the products which are purchased from our sales offices or distributors (so called TAIYO YUDEN s official sales channel ). It is only applicable to the products purchased from any of TAIYO YUDEN s official sales channel. Please note that Taiyo Yuden Co., Ltd. shall have no responsibility for any controversies or disputes that may occur in connection with a third party's intellectual property rights and other related rights arising from your usage of products in this catalog. Taiyo Yuden Co., Ltd. grants no license for such rights. Caution for export Certain items in this catalog may require specific procedures for export according to Foreign Exchange and Foreign Trade Control Law of Japan, U.S. Export Administration Regulations , and other applicable regulations. Should you have any question or inquiry on this matter, please contact our sales staff. Should you have any question or inquiry on this matter, please contact our sales staff. 1 notice_e-01 AXIAL LEADED CERAMIC CAPACITORS WAVE FEATURES APPLICATIONS This widely used ceramic capacitor provides a wide capacitance range of 1pF through 10F in one standard size and shape. The class 1 temperature compensating (NPO) products can be used in circuits to stabilize frequency and temperature characteristics. The B, and F dielectrics are optimum for bypass capacitors. Automatic insertion related costs are lower than with radial type capacitors. Mounting pitch can be between 5mm to 26mm which could be used as a jumper. ORDERING CODE U P Rated voltage VDC L 10 E 16 T 25 G 35 U 50 0 5 B 2 1 0 Type Axial leaded capacitors Temperature haracteristics CH 060 ppm/ P SL 3501000ppm/ Outside Dimensions B 10 Lxd mm 30 85% 075 4.2x3.2 multilayer type F =Blank space 050 3.2x2.2 multilayer type 025 2.3x2.0 multilayer type K A B 4 Nominal Capacitance pF example 010 1 1R2 1.2 103 10000 R=decimal point Capacitance Tolerances D 0.5pF J 5% K 10% M 20% 80 Z 20 Lead Configurationmm A 26mm lead space, ammo pack B 52mm lead space, ammo pack KF 5.0mm pitch formed lead bulk KE 7.5mm pitch formed lead bulk NA Axial lead, bulk Internal code Multilayer type Standard products Multilayer type J Low voltage products =Blank space ,Z EXTERNAL DIMENSIONS/Minimum Quantity TYPE Multilayer Type 075 Multilayer Type 050 Multilayer Type 025 Dimensions D 3.2max. 0.126max. 2.2max. 0.87max. 2.0max. 0.079max. L 4.2max. 0.165max. 3.2max. 0.126max. 2.3max. 0.09max. Taped product Straight d 0.550.05 0.0220.002 Bulk Product Straight Formed Pitch:7.5mm 0.295 0.450.05 0.0180.002 Unit : mm inch AVAILABLE CAPACITANCE RANGE Class 1 Temperature compensating Type cap. pF3digits pF 1 010 1.2 1R2 1.5 1R5 1.8 1R8 2.2 2R2 2.7 2R7 3.3 3R3 3.9 3R9 4.7 4R7 5.6 5R6 6.8 6R8 8.2 8R2 10 100 11 110 12 120 13 130 15 150 16 160 18 180 20 200 22 220 24 240 27 270 30 300 33 330 36 360 39 390 43 430 47 470 51 510 56 560 62 620 68 680 100 101 150 151 220 221 330 331 470 471 680 681 1000 102 025 050 Minimum Quantity [PCS] Bulk Taping 2000075 A -- 3000050 B -- 5000025 NA 1000 -- KE075 3000 -- KF050 3000 -- KF025 4000 -- Class 2 High dielectric constant 50V UP CH SL WV Temp.char. Packaging B Ammo C Bulk Temp.char. Type cap. pF3digits pF 100 101 120 121 150 151 180 181 220 221 270 271 330 331 390 391 470 471 560 561 680 681 820 821 1000 102 1200 122 1500 152 1800 182 2200 222 2700 272 3300 332 3900 392 4700 472 5600 562 6800 682 8200 822 10000 103 12000 123 15000 153 18000 183 22000 223 27000 273 33000 333 39000 393 47000 473 56000 563 68000 683 82000 823 100000 104 220000 224 470000 474 1000000 105 2200000 225 4700000 475 10000000 106 025 Temperature char. CH Capacitance change 060ppm/ SL 3501000ppm/ B 10% F 30 85% Multilayer type 50V UP WV B 025 050 35V GP B F F 075 025 050 Capacitance Tolerance D 0.5pF K 10% J 5% 20% K 10%, M 050 075 075 25V TP B F 075 025 16VEP B 025 10VLP F F 050 025 Q or tan 050 050 Class 1 engRefer to the Part munber Z 80 20 % 2 Capacitance characteristics measured at 20 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 36 1 leaded_c01_e-01 PART NUMBERS Multilayer 025 Type Class 1 Ordering code Multilayer 025 Type Rated Voltage DC 50V 16V 50V 16V 1.0 1.2 1.5 1.8 2.2 2.7 3.3 3.9 4.7 5.6 6.8 8.2 10 12 15 18 22 27 33 39 47 56 68 82 100 150 220 330 470 680 1000 Capacitance tolerance Insulation resistance Q or tan 0.5pF Q400+20C 10% 10000Mmin. 5% Q1000 Class 2 Ordering code UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 UP025 EP025 EP025 EP025 UP025 UP025 UP025 UP025 EP025 EP025 EP025 Capacitance pF CAPACITORS EHS (Environmental Temperature Hazardous characteristics Substances) RoHS UP025010D Z RoHS UP0251R2D Z RoHS UP0251R5D Z RoHS UP0251R8D Z RoHS UP0252R2D Z RoHS UP0252R7D Z RoHS UP0253R3D Z RoHS UP0253R9D Z RoHS UP0254R7D Z RoHS UP0255R6K Z RoHS UP0256R8K Z CH RoHS UP0258R2K Z SL RoHS UP025100J Z RoHS UP025120J Z RoHS UP025150J Z 50V RoHS UP025180J Z RoHS UP025220J Z RoHS UP025270J Z RoHS UP025330J Z RoHS UP025390J Z RoHS UP025470J Z RoHS UP025560J Z RoHS UP025680J Z RoHS UP025820J Z RoHS UP025CH101J Z RoHS UP025CH151J Z RoHS UP025CH221J Z CH RoHS UP025CH331J Z RoHS UP025CH471J Z RoHS UP025CH681J Z RoHS UP025CH102J Z Please specify the temperature characteristics code and lead configuration code. Rated Voltage DC B101K Z B121K Z B151K Z B181K Z B221K Z B271K Z B331K Z B391K Z B471K Z B561K Z B681K Z B821K Z B102K Z B122K Z B152K Z B222K Z B332K Z B472K Z B682K Z B103K Z B153K Z B223K Z B333K Z B473K Z B683K Z B104K Z B224K Z B474K Z B105K Z F103Z Z F223Z Z F473Z Z F104Z Z F224Z Z F474Z Z F105Z Z EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS Temperature characteristics B F Capacitance pF 100 120 150 180 220 270 330 390 470 560 680 820 1000 1200 1500 2200 3300 4700 6800 10000 15000 22000 33000 47000 68000 100000 220000 470000 100000 10000 22000 47000 100000 220000 470000 100000 Capacitance tolerance Q or tan Insulation resistance tan3.5% 5000Mmin. 10% 1000Mmin. tan5.0% tan7.5% 500Mmin. 200Mmin. 100Mmin. tan7.5% 1000Mmin. tan10.0% 500Mmin. tan17.5% 250Mmin. 80 20 To next page This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c01_e-01 1 37 PART NUMBERS EHS (Environmental Temperature Hazardous characteristics Substances) EP025 B122M J RoHS EP025 B152M J RoHS EP025 B182M J RoHS EP025 B222M J RoHS EP025 B272M J RoHS EP025 B332M J RoHS EP025 B392M J RoHS EP025 B472M J RoHS B 16V EP025 B562M J RoHS EP025 B682M J RoHS EP025 B822M J RoHS EP025 B103M J RoHS EP025 B123M J RoHS EP025 B153M J RoHS EP025 B183M J RoHS EP025 B223M J RoHS TP025 F103Z J RoHS TP025 F223Z J RoHS F 25V TP025 F473Z J RoHS Please specify the temperature characteristics code and lead configuration code. Rated Voltage DC Ordering code Multilayer type 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 18000 22000 10000 22000 47000 Capacitance tolerance Q or tan Insulation resistance 20 tan3.5% 5000Mmin. tan7.5% 1000Mmin. Q or tan Insulation resistance 80 20 Class 1 EHS (Environmental Temperature Hazardous characteristics Substances) UP050CH220J Z RoHS RoHS UP050CH240J Z RoHS UP050CH270J Z RoHS UP050CH300J Z RoHS UP050CH330J Z RoHS UP050CH360J Z RoHS UP050CH390J Z RoHS UP050CH430J Z RoHS UP050CH470J Z RoHS UP050CH510J Z RoHS UP050CH560J Z RoHS UP050CH620J Z RoHS UP050CH680J Z RoHS UP050CH750J Z RoHS UP050CH820J Z RoHS UP050CH910J Z RoHS UP050CH101J Z RoHS UP050CH111J Z RoHS UP050CH121J Z RoHS UP050CH131J Z RoHS UP050CH151J Z 50V CH RoHS UP050CH161J Z RoHS UP050CH181J Z RoHS UP050CH201J Z RoHS UP050CH221J Z RoHS UP050CH241J Z RoHS UP050CH271J Z RoHS UP050CH301J Z RoHS UP050CH331J Z RoHS UP050CH361J Z RoHS UP050CH391J Z RoHS UP050CH431J Z RoHS UP050CH471J Z RoHS UP050CH511J Z RoHS UP050CH561J Z RoHS UP050CH621J Z RoHS UP050CH681J Z RoHS UP050CH751J Z RoHS UP050CH821J Z RoHS UP050CH911J Z RoHS UP050CH102J Z Please specify the temperature characteristics code and lead configuration code. : Option Rated Voltage DC Capacitance pF Ordering code Capacitance pF 22 24 27 30 33 36 39 43 47 51 56 62 68 75 82 91 100 110 120 130 150 160 180 200 220 240 270 300 330 360 390 430 470 510 560 620 680 750 820 910 1000 Capacitance tolerance Q40020C 5% 10000Mmin. Q1000 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 38 1 leaded_c01_e-01 PART NUMBERS Multilayer type Rated Voltage DC Class 2 Ordering code 35V G P 0 7 5 F 1 0 6 Z 50V 35V 16V 50V 16V 10V 50V 35V RoHS Temperature characteristics B F B F Capacitance pF 1200 1500 1800 2200 2700 3300 3900 4700 5600 6800 8200 10000 12000 15000 18000 22000 27000 33000 39000 47000 56000 68000 82000 100000 220000 470000 1000000 2200000 4700000 10000000 10000 22000 47000 100000 220000 470000 1000000 2200000 4700000 10000000 1000000 2200000 4700000 10000000 10000000 Please specify the temperature characteristics code and lead configuration code. : Option Capacitance tolerance Q or tan Insulation resistance tan3.5% 5000Mmin. 10% CAPACITORS 25V U P 0 5 0 B 1 2 2 K Z U P 0 5 0 B 1 5 2 K Z U P 0 5 0 B 1 8 2 K Z U P 0 5 0 B 2 2 2 K Z U P 0 5 0 B 2 7 2 K Z U P 0 5 0 B 3 3 2 K Z U P 0 5 0 B 3 9 2 K Z U P 0 5 0 B 4 7 2 K Z U P 0 5 0 B 5 6 2 K Z U P 0 5 0 B 6 8 2 K Z U P 0 5 0 B 8 2 2 K Z U P 0 5 0 B 1 0 3 K Z U P 0 5 0 B 1 2 3 K Z U P 0 5 0 B 1 5 3 K Z U P 0 5 0 B 1 8 3 K Z U P 0 5 0 B 2 2 3 K Z U P 0 5 0 B 2 7 3 K Z U P 0 5 0 B 3 3 3 K Z U P 0 5 0 B 3 9 3 K Z U P 0 5 0 B 4 7 3 K Z U P 0 5 0 B 5 6 3 K Z U P 0 5 0 B 6 8 3 K Z U P 0 5 0 B 8 2 3 K Z U P 0 5 0 B 1 0 4 K Z U P 0 5 0 B 2 2 4 K Z U P 0 5 0 B 4 7 4 K Z G P 0 5 0 B 1 0 5 K Z E P 0 5 0 B 2 2 5 K Z E P 0 5 0 B 4 7 5 K Z E P 0 5 0 B 1 0 6 K Z U P 0 5 0 F 1 0 3 Z Z U P 0 5 0 F 2 2 3 Z Z U P 0 5 0 F 4 7 3 Z Z U P 0 5 0 F 1 0 4 Z Z U P 0 5 0 F 2 2 4 Z Z U P 0 5 0 F 4 7 4 Z Z U P 0 5 0 F 1 0 5 Z Z E P 0 5 0 F 2 2 5 Z Z L P 0 5 0 F 4 7 5 Z Z L P 0 5 0 F 1 0 6 Z Z U P 0 7 5 B 1 0 5 K G P 0 7 5 B 2 2 5 K G P 0 7 5 B 4 7 5 K T P 0 7 5 B 1 0 6 K EHS (Environmental Hazardous Substances) RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS RoHS 1000Mmin. tan5.0% 80 20 tan7.5% 500Mmin. 200Mmin. 100Mmin. 50Mmin. tan12.5% 20Mmin. tan7.5% 1000Mmin. tan10.0% 500Mmin. tan15% tan17.5% tan5.0% 10% 80 20 tan7.5% tan12.5% tan17.5% 250Mmin. 125Mmin. 50Mmin. 25Mmin. 100Mmin. 50Mmin. 20Mmin. 25Mmin. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c01_e-01 1 39 ELECTRICAL CHARACTERISTICS Capacitance -vs- Temperature Characteristics 10 UP050 F104Z SL 5 0 -5 UP050B104K UP050B103K -6 -7 -10 -20 0 20 40 60 80 -20 0 20 40 60 80 This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. 40 1 leaded_c01_e-01 PACKAGING Minimum Quantity Type Ba2.047 inches wideconfiguration Minimum Quantity PCS Bulk Taping 2000 075 -- 3000 050 5000 025 1000 3000 -- 3000 4000 Lead configuration code A 1.024 inch wide B 2.047 inches wide Multilayer NA type 075, 050, 025 KE 075 KF 050 KF 025 Dimensions of Bulk Products NA configuration Dimensions mm Type Type Dimensions mm L d 2.3max 0.450.05 0.09 0.0180.002 3.2max 0.450.05 0.126 0.0180.002 4.2max 0.550.05 0.165 0.0220.002 D 2.0max 0.079 2.2max 0.087 3.2max 0.126 Multilayer type 025 Multilayer type 050 Multilayer type 075 Multilayer type 025 20.0min. 0.787 20.0min. 0.787 20.0min. 0.787 Unitmm inch Multilayer type 050 Multilayer type 075 D 2.0max 0.079max 2.2max 0.087max 3.2max 0.126max L a b L1L2 d Minimum insertion pitch 2.3max 0.450.05 0.09max 0.0180.002 5.0 2 52 0.197 3.2max 0.450.05 1 1.2max. 1.0max 0.126max 2.0470.079 0.047max. 0.039max. 0.0180.002 0.039 4.2max 0.550.05 7.5 0.165max 0.0220.002 0.295 Radial taping is available for 075 type (Optional) Unitmm inch KF/KE configuration Type Multilayer type 025 KF Multilayer type 050 KF Multilayer type 075 KE Dimensions mm D L W d 5.00.5 0.450.05 6.50.5 2.0max 2.3max 0.079max 0.09max 0.1970.020 0.0180.002 0.2560.020 5.00.5 0.450.05 6.50.5 2.2max 3.2max 0.087max 0.126max 0.1970.020 0.0180.002 0.2560.020 7.50.5 0.550.05 6.50.5 3.2max 4.2max 0.126max 0.165max 0.2950.020 0.0220.002 0.2560.020 Unitmm inch Taping Dimensions Aa1.024 inch wideconfiguration Dimensions mm Type D Multilayer type 025 2.0max 0.079max 2.2max 0.087max 3.2max 0.126max Multilayer type 050 Multilayer type 075 L a b L1L 2 d Minimum insertion pitch 2.3max 0.450.05 0.09max 0.0180.002 5.0 0.5 26 0.8max. 0 0.197 3.2max 0.450.05 0.5max 0.126max 1.0240.020 0.031max. 0.020max. 0.0180.002 0 4.2max 0.550.05 7.5 0.165max 0.0220.002 0.295 Unitmm inch This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c_reli_e-01 1 leaded_c_reli-PRP1 RELIABILITYDATA AXIAL LEADED CERAMIC CAPACITORS 1. Operating Temperature Range Temperature Compensating Class1 Specified Value High Permittivity Class2 2. Storage Temperature Range Class1 Temperature Compensating Specified Value High Permittivity Class2 3. Rated Voltage Class1 Temperature Compensating Specified Value High Permittivity Class2 Multilayer type Multilayer type CharacteristicsB Multilayer type CharacteristicsF 25 to 85 Multilayer type Multilayer type CharacteristicsB Multilayer type CharacteristicsF 25 to 85 Multilayer type Multilayer type CharacteristicsB Multilayer type CharacteristicsF 50VDC 16VDC25VDC35VDC50VDC 10VDC16VDC25VDC35VDC50VDC 4. Withstanding Voltage Between terminals Specified No abnorminality Value Test Methods and Remarks Applied voltage Rated Voltagex3Class 1 Rated Voltagex2.5 Class 2 Duration1 to 5 sec. Charge/discharge current50mA max.Class 1,2 Between terminals and body Specified No abnorminality Value Test Methods and Remarks Metal globule method Applied voltageRated Voltagex2.5, Duration1 to 5 sec., Charge/Discharge current50mA max. Insulation Resistance Class1 Temperature Compensating Multilayer type Multilayer type CharacteristicsB Specified Value High Permittivity Class2 Multilayer type CharacteristicsF 10000min. Rated Ivoltage16VDC 1200pF22000pF Item 5000M min 220000pF 500M min 470000pF 200M min 1000000pF 100M min 4700000pF 20M min 2200000pF 50M min 10000000pF 20M min 10000000pF 20M min Rated Ivoltage25VDC 10000000pF 20Mmin Rated Ivoltage35VDC 1000000pF 100M min 2200000pF 50M min 4700000pF 20M min Rated Ivoltage50VDC 100pF39000pF 5000M min 47000pF100000pF 1000M min 220000pF 500M min 470000pF 200M min 1000000pF 100M min Rated Ivoltage10VDC 4700000pF 50M min 10000000pF 25M min Rated Ivoltage16VDC 220000pF 500M min 470000pF 500M min 1000000pF 250M min 2200000pF 125M min Rated voltage25VDC 10000pF47000pF ItemJ1000M min Rated voltage35VDC 10000000pF 25M min Rated voltage50VDC 10000pF100000pF 000M min 220000pF470000pF 500M min 1000000pF 250M min Test Methods and Remarks Applied voltageRated voltage, Duration605 sec. 6Capacitance Temperature Compensating Class1 Specified Value High Permittivity Class2 Test Methods and Remarks Measuring frequency 1MHz10 1kHz10 1kHz10 120Hz10 Multilayer type Multilayer type CharacteristicsB Multilayer type CharacteristicsF Class 1C1000pF Class 1C1000pF Class 2C10F Class 2C10F 0.5pF 5% 10% 10%20% ItemJ 80 % 20 Measuring voltage 1.00.5Vrms 1.00.2Vrms 1.00.2Vrms 0.50.1Vrms Class 1C1000pF Class 1C1000pF Class 2C10F Class 2C10F Bias applicationNone Withstanding voltage is also referred to as "voltage proof" under IEC specifications. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c_reli-PRP2 1 leaded_c_reli_e-01 RELIABILITYDATA AXIAL LEADED CERAMIC CAPACITORS Q or Tangent of Loss Angle tan Temperature Compensating Class1 30pF or underQ40020C 33pF or overQ1000 CNominal Capacitance pF Rated Ivoltage16VDC 1200pF22000pF ItemJ 3.5% max 100000pF 5.0% max 220000pF470000pF 5.0% max 1000000pF2200000pF 7.5% max 4700000pF10000000pF 12.5% max Rated Ivoltage25VDC 10000000pF 12.5% max Rated Ivoltage35VDC 1000000pF 5.0% max 2200000pF4700000pF 7.5% max Rated Ivoltage50VDC 100pF39000pF 3.5% max 47000pF1000000pF 5.0% max Rated Ivoltage10VDC 4700000pF10000000pF 17.5% max Rated Ivoltage16VDC 220000pF 10.0% max 470000pF 10.0% max 1000000pF 17.5% max 2200000pF 15.0% max Rated Ivoltage25VDC 10000pF47000pF ItemJ7.5% max Rated Ivoltage35VDC 10000000pF 17.5% max Rated Ivoltage50VDC 10000pF100000pF 7.5% max 220000pF470000pF 10.0% max 1000000pF 15.0% max Multilayer type Multilayer type CharacteristicsB Specified Value High Permittivity Class2 Multilayer type CharacteristicsF Test Methods and Remarks Measuring frequency 1MHz10 1kHz10 1kHz10 120Hz10 Class 1C1000pF Class 1C1000pF Class 2C10F Class 2C10F Measuring voltage 1.00.5Vrms 1.00.2Vrms 1.00.2Vrms 0.50.1Vrms Class 1C1000pF Class 1C1000pF Class 2C10F Class 2C10F Bias applicationNone CapacitanceChange due to Temperature or Rate of Capacitance Change When voltage is not applied Class1 Temperature Compensating Specified Value CH060 SL 3501000 Multilayer type Multilayer type CharacteristicsB Multilayer type CharacteristicsF High Permittivity Class2 [ppm/] 10% 30 85% Test Methods and Remarks Measurement of capacitance at 20 and 85, 25 shall be made to calculate temperature characteristic by the following equation.Class 1 C85C20 6 ------------ x10ppm/ C20xT Change of maximum capacitance deviation in step 1 to 5Class 2 Temperature at step 120 Temperature at step 485 Temperature at step 225 Temperature at step 520 Temperature at step 320Reference temperature 9Terminal Strength Tensile Class1 Temperature Compensating Specified Value High Permittivity Class2 Multilayer type Multilayer type CharacteristicsB Multilayer type CharacteristicsF Test Methods and Remarks Apply the stated tensile force progressively in the direction to draw terminal. No abnomalities, such as cuts or looseness of terminals. Nominal wire diametermm 0.45 Tensile force N 19.6 Duratio s 5 Torsional Class1 Temperature Compensating Specified Value High Permittivity Class2 Multilayer type Multilayer type CharacteristicsB Multilayer type CharacteristicsF No abnomalities, such as cuts or looseness of terminals. Test Methods and Remarks Suspend a mass at the end the terminal, incline the body through angle of 90 and return it to initial position. This operation is done over a period of 5 sec. Then second bend in the opposite direction shall be made. Number of bends2 times Nominal wire diameter mm 0.45 Bending force N 2.45 Mass weight kg 0.25 Withstanding voltage is also referred to as "voltage proof" under IEC specifications. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c_reli_e-01 1 leaded_c_reli-PRP3 RELIABILITYDATA AXIAL LEADED CERAMIC CAPACITORS 10Resistance to Vibration Specified Value AppearanceNo significant abnomality Withstanding VoltageNo abnomality Capacitance 4.7pF or under Within 0.5pF 5.6pF8.2pF Within 10% Temperature Multilayer type 10pF or over Within 5% Compensating Class1 Q30pF or under Q400+20C Q1000 33pF or over Insulation resistance 10000Mmin. CNominal Capacitance[pF] Appearance : No significant abnomality Withstanding Voltage : No abnomality Rated Voltage16VDC CapacitanceWithin 10% 1200pF22000pF ItemJWithin 20% 220000pF~10000000pF Within 10% tan 1200pF22000pF ItemJ3.5% max 220000pF470000pF 5.0% max 1000000pF2200000pF 7.5% max 4700000pF10000000pF 12.5% max Insulation Resistance 1200pF22000pF ItemJ5000M min 220000pF 500M min 470000pF 200M min 1000000pF 100M min 2200000pF 50M min 4700000pF10000000pF 20M min Rated Voltage25VDC CapacitanceWithin 10% tan 10000000pF 12.5% max Multilayer type CharacteristicsB Insulation Resistance 10000000pF 20M min Rated Voltage35VDC CapacitanceWithin 10% tan 1000000pF 5.0% max 2200000pF4700000pF 7.5% max Insulation Resistance 1000000pF 100M min 2200000pF 50M min 4700000pF 20M min Rated Voltage50VDC CapacitanceWithin 10% High Permittivity Class2 tan 100pF39000pF 3.5% max 47000pF1000000pF 5.0% max Insulation Resistance 100pF39000pF 5000M min 47000pF100000pF 1000M min 220000pF 500M min 470000pF 200M min 1000000pF 100M min Appearance : No significant abnomality Withstanding Voltage : No abnomality Rated Voltage10VDC CapacitanceWithin80 % 20 tan 4700000pF10000000pF 17.5% max Insulation Resistance 4700000pF 50M min 10000000pF 25M min Rated Voltage16VDC Multilayer type CharacteristicsF CapacitanceWithin80 % 20 tan 220000pF 470000pF 1000000pF 2200000pF 10.0% max 10.0% max 17.5% max 15.0% max Insulation Resistance 220000pF 470000pF 1000000pF 2200000pF 500M min 500M min 250M min 125M min To next page Withstanding voltage is also referred to as "voltage proof" under IEC specifications. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c_reli-PRP4 1 leaded_c_reli_e-01 RELIABILITYDATA AXIAL LEADED CERAMIC CAPACITORS 10Resistance to Vibration Rated Voltage25VDC CapacitanceWithin80 % 20 tan 10000pF47000pF ItemJ7.5% max Insulation Resistance 10000pF47000pF ItemJ1000M min Rated Voltage35VDC CapacitanceWithin80 % 20 Specified Value tan 10000000pF High Permittivity Class2Multilayer typeCharacteristicsF Insulation Resistance 10000000pF Rated Voltage50VDC CapacitanceWithin80 % 20 tan 10000pF100000p 220000pF470000pF 1000000pF Insulation Resistance 10000pF100000p 220000pF470000pF 1000000pF 17.5% max 25M min 7.5% max 10.0% max 15.0% max 1000M min 500M min 250M min Test Methods and Remarks According to JIS C 5102 clause 8.2 Vibration typeA Directions2 hrs each in X, Y and Z directions Total6 hrs Frequency range10 to 55 to 10Hz1min Amplitude1.5 mm Mounting methodSoldering onto the PC board 11Free Fall AppearanceNo significant abnomality Withstanding VoltageNo abnomality Temperature Multilayer type Compensating Class1 Capacitance 4.7pF or under Within 0.5pF 5.6pF8.2pF Within 10% 10pF or over Within 5% Q30pF or under Q400+20C 33pF or over Q1000 Insulation resistance10000M min. CNominal Capacitance[pF] AppearanceNo significant abnomality Withstanding VoltageNo abnomality Rated Voltage16VDC Capacitance 1200pF22000pF ItemJWithin 20% 220000pF10000000pFWithin 10% tan 1200pF22000pF ItemJ3.5% max 220000pF470000pF 5.0% max 1000000pF2200000pF 7.5% max 4700000pF10000000pF 12.5% max Specified Value Insulation resistance 1200pF22000pF ItemJ5000M min 220000pF 500M min 470000pF 200M min 1000000pF 100M min 2200000pF 50M min 4700000pF10000000pF 20M min Rated Voltage25VDC CapacitanceWithin 10% High Permittivity Class2Multilayer type CharacteristicsB tan 10000000pF 12.5% max Insulation resistance 10000000pF 20M min Rated Voltage35VDC CapacitanceWithin 10% tan 1000000pF 5.0% max 2200000pF4700000pF 7.5% max Insulation resistance 1000000pF 100M min 2200000pF 50M min 4700000pF 20M min Rated Voltage50VDC CapacitanceWithin10% tan 100pF39000pF 3.5% max 47000pF1000000pF 5.0% max Insulation resistance 100pF39000pF 5000M min 47000pF100000pF 1000M min 220000pF 500M min 470000pF 200M min 1000000pF 100M min To next page Withstanding voltage is also referred to as "voltage proof" under IEC specifications. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c_reli_e-01 1 leaded_c_reli-PRP5 RELIABILITYDATA AXIAL LEADED CERAMIC CAPACITORS 11Free Fall AppearanceNo significant abnomality Withstanding VoltageNo abnomality Rated Voltage10VDC CapacitanceWithin80 % 20 tan 4700000pF10000000pF17.5% max Insulation resistance 4700000pF 50M min 10000000pF 25M min Rated Voltage16VDC CapacitanceWithin80 % 20 Specified Value tan 220000pF 10.0% max 470000pF 10.0% max 1000000pF 17.5% max 2200000pF 15.0% max Insulation resistance 220000pF 500M min 470000pF 500M min 1000000pF 250M min 2200000pF 125M min Rated Voltage25VDC High Permittivity Class2Multilayer type CharacteristicsF CapacitanceWithin80 % 20 tan 10000pF47000pF ItemJ 7.5% max Insulation resistance 10000pF47000pF ItemJ 1000M min Rated Voltage35VDC CapacitanceWithin80 % 20 tan 10000000pF 17.5% max Insulation resistance 10000000pF 25M min Rated Voltage50VDC CapacitanceWithin80 % 20 tan 10000pF100000pF 220000pF470000pF 1000000pF Insulation resistance 10000pF100000pF 220000pF470000pF 1000000pF 7.5% max 10.0% max 15.0% max 1000M min 500M min 250M min Test Methods and Remarks Drop TestFree fall Impact materialFloor Height1 m Total number of drops5 times 12Body Strength Temperature Multilayer type Compensating Class1 Specified No abnomality such as damage. Value Multilayer type CharacteristicsB High Permittivity Class2 Multilayer type CharacteristicsF Test Methods and Remarks Applied force19.6N Duration5 sec. SpeedShall attain to specified force in 2 sec. 1.5mm025type 13Solderability Temperature Multilayer type Compensating Class1 Specified At least 75% of lead surface is covered with new solder. Value Multilayer type CharacteristicsB High Permittivity Class2 Multilayer type CharacteristicsF Test Methods and Remarks Solder temperature2305 Duration20.5 sec. This test may be applicable after 6 months storage. Withstanding voltage is also referred to as "voltage proof" under IEC specifications. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c_reli-PRP6 1 leaded_c_reli_e-01 RELIABILITYDATA AXIAL LEADED CERAMIC CAPACITORS 14Soldering AppearanceNo significant abnomality Withstanding VoltageNo abnomality Temperature Multilayer type Compensating Class1 Capacitance change 8.2pF or under Within 0.25pF 10pF or over Within 2.5% Q30pF or under Q400+20C 33pF or over Q1000 Insulation resistance10000M min. CNominal Capacitance[pF] AppearanceNo significant abnomality Withstanding VoltageNo abnomality Rated Voltage16VDC Capacitance change 1200pF22000pF ItemJWithin 7.5% 220000pF10000000pF Within 10.0% tan 1200pF22000pF ItemJ3.5% max 220000pF470000pF 5.0% max 1000000pF2200000pF 7.5% max 4700000pF10000000pF 12.5% max Insulation resistance 1200pF22000pF ItemJ5000M min 220000pF 500M min 470000pF 200M min 1000000pF 100M min 2200000pF 50M min 4700000pF10000000pF 20M min Rated Voltage25VDC Capacitance change 10000000pF Within 10.0% tan 10000000pF 12.5% max Insulation resistance Multilayer type CharacteristicsB 10000000pF 20M min Rated Voltage35VDC Capacitance change 1000000pF4700000pF Within 10.0% tan 1000000pF 5.0% max 2200000pF4700000pF 7.5% max Specified Value High Permittivity Class2 Insulation resistance 1000000pF 100M min 2200000pF 50M min 4700000pF 20M min Rated Voltage50VDC Capacitance change 100pF39000pF Within 7.5% 47000pF1000000pF Within 10.0% tan 100pF39000pF 47000pF1000000pF 3.5% max 5.0% max Insulation resistance 100pF39000pF 5000M min 47000pF100000pF 1000M min 220000pF 500M min 470000pF 200M min 1000000pF 100M min AppearanceNo significant abnomality Withstanding VoltageNo abnomality Rated Voltage10VDC Capacitance changeWithin 20% tan 4700000pF10000000pF 17.5% max Insulation resistance 4700000pF 50M min 10000000pF 25M min Rated Voltage16VDC Capacitance changeWithin 20% Multilayer type CharacteristicsF tan 220000pF470000pF 10.0% max 1000000pF 17.5% max 2200000pF 15.0% max Insulation resistance 220000pF470000pF 500M min 1000000pF 250M min 2200000pF 125M min Rated Voltage25VDC Capacitance changeWithin 20% tan 10000pF47000pF ItemJ 7.5% max Insulation resistance 10000pF47000pF ItemJ 1000M min Withstanding voltage is also referred to as "voltage proof" under IEC specifications. Thermal Shock is also referred to as "rapid change of temperature" under IEC specifications. To next page This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c_reli_e-01 1 leaded_c_reli-PRP7 RELIABILITYDATA AXIAL LEADED CERAMIC CAPACITORS 14Soldering Rated Voltage35VDC Capacitance changeWithin 20% tan 10000000pF 17.5% max Insulation resistance 10000000pF 25M min Rated Voltage50VDC Capacitance change Specified High Permittivity Class2Multilayer type CharacteristicsF 10000pF1000000pF Within 20.0% Value tan 10000pF100000pF 7.5% max 220000pF470000pF 10.0% max 1000000pF 15.0% max Insulation resistance 10000pF100000pF 1000M min 220000pF470000pF 500M min 1000000pF 250M min Test Methods and Remarks Solder temperature2705 Duration50.5 sec. Immersed conditionsInserted into the PC board with t=1.6mm, hole=1.0mm diameter 0 Preconditioning1 hr of preconditioning at 150 10 followed by 484 hrs of recovery under the standard condition. RecoveryRecovery for the following period under the standard condition after the test. 242 hrs Class 1 484 hrs Class 2 15Resistance to Solvent Temperature Multilayer type Compensating Class1 Specified No significant abnormality in appearance and legible marking. Value Multilayer type CharacteristicsB High Permittivity Class2 Multilayer type CharacteristicsF Test Methods and Remarks According to JIS C 5102 clause 8.7.4. Type of testMethod 1 Solvent temperature20 to 25 Duration305 sec. Solvent TypeA in Table 23, Isopropyl alcohol 16Thermal Shock AppearanceNo significant abnomality Withstanding VoltageNo abnomality Capacitance change 8.2pF or under Within 0.5pF 10pF or over Within 5.0% Q 8.2pF or under Q200+10C 10pF30pF Q275+2.5C Q350 33pF or over Insulation resistance1000M or over CNominal Capacitance[pF] AppearanceNo significant abnomality Withstanding VoltageNo abnomality Rated Voltage16VDC Capacitance change 1200pF22000pF Within 12.5% ItemJ 220000pF10000000pF Within 15.0% tan 1200pF22000pF ItemJ 5.0% max 220000pF470000pF 7.5% max 1000000pF2200000pF 10.0% max 4700000pF10000000pF 22.5% max Insulation resistance 1200pF22000pF ItemJ 1000M min 220000pF 125M min 470000pF 50M min 1000000pF 25M min 2200000pF 12.5M min 4700000pF10000000pF 5M min High Permittivity Class2Multilayer type CharacteristicsB Rated Voltage25VDC Capacitance change Temperature Multilayer type Compensating Class1 Specified Value 10000000pF tan 10000000pF Insulation resistance 10000000pF Rated Voltage35VDC Capacitance change 1000000pF 2200000pF4700000pF tan 1000000pF 2200000pF4700000pF Insulation resistance 1000000pF 2200000pF 4700000pF Within 15.0% 15.0% max 5M min Within 15.0% Within 15.0% 7.5% max 10.0% max 25M min 25M min 5M min Withstanding voltage is also referred to as "voltage proof" under IEC specifications. Thermal Shock is also referred to as "rapid change of temperature" under IEC specifications. To next page This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c_reli-PRP8 1 leaded_c_reli_e-01 RELIABILITYDATA AXIAL LEADED CERAMIC CAPACITORS 16Thermal Shock Rated Voltage50VDC Capacitance change 100pF39000pF 47000pF1000000pF tan 100pF39000pF Multilayer type CharacteristicsB 47000pF1000000pF Within 12.5% Within 15.0% 5.0% max 7.5% max Insulation resistance 1000M min 100pF39000pF 47000pF100000pF 500M min 220000pF 250M min 470000pF 100M min 1000000pF 50M min AppearanceNo significant abnomality Withstanding VoltageNo abnomality Rated Voltage10VDC Capacitance change Within 30.0% tan 4700000pF10000000pF20.0% max Insulation resistance 4700000pF 10000000pF Rated Voltage16VDC Capacitance change Specified Value tan 220000pF470000pF 1000000pF 2200000pF High Permittivity Class2 Multilayer typeCharacteristicsF 10M min 5M min Within 30.0% 15.0% max 22.5% max 17.5% max Insulation resistance 220000pF 100M min 470000pF 50M min 1000000pF 25M min 2200000pF 25M min Rated Voltage25VDC Capacitance change Within 30% tan 10000pF47000pF ItemJ 12.5% max Insulation resistance 10000pF47000pF ItemJ 500M min Rated Voltage35VDC Capacitance change Within 30.0% tan 10000000pF 20.0% max Insulation resistance 10000000pF 5M min Rated Voltage50VDC Capacitance change 10000pF1000000pF Within 30.0% tan 10000pF100000pF 220000pF470000pF 1000000pF 12.5% max 15.0% max 17.5% max Insulation resistance 10000pF100000pF 220000pF470000pF 1000000pF 500M min 250M min 50M min Test Methods and Remarks Conditions for 1 cycle Temperature Room temperature 0 253 Durationmin. Within 3 Within 3 4 Room temperature 3 850 5 Room temperature Within 3 Step 1 2 3 303 303 Number of cycles5 0 Preconditioning1 hr of preconditioning at 150 10 followed by 484 hrs of recovery under the standard condition. RecoveryRecovery for the following period under the standard condition after the removal from test chamber. 242 hrsClass 1 484 hrsClass 2 Withstanding voltage is also referred to as "voltage proof" under IEC specifications. Thermal Shock is also referred to as "rapid change of temperature" under IEC specifications. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c_reli_e-01 1 leaded_c_reli-PRP9 RELIABILITYDATA AXIAL LEADED CERAMIC CAPACITORS 17Damp Heatsteady state Temperature Multilayer type Compensating Class1 AppearanceNo significant abnomality Withstanding VoltageNo abnomality Capacitance change 8.2pF or under Within 0.5pF 10pF or over Within 5.0% Q20010C Q8.2pF or under 10pF30pF Q2752.5C Q350 33pF or over Insulation resistance1000M min CNominal Capacitance pF AppearanceNo significant abnomality Withstanding VoltageNo abnomality Rated Voltage16VDC Capacitance change 1200pF22000pF Within 12.5% ItemJ 220000pF10000000pF Within 15.0% tan 1200pF22000pF ItemJ 5.0% max 220000pF470000pF 7.5% max 1000000pF2200000pF 10.0% max 4700000pF10000000pF 22.5% max Insulation resistance 1200pF22000pF ItemJ 1000M min 220000pF 125M min 470000pF 50M min 1000000pF 25M min 2200000pF 12.5M min 4700000pF10000000pF 5M min Rated Voltage25VDC Capacitance change 10000000pF Within 15.0% tan 10000000pF 15.0% max Insulation resistance 10000000pF 5M min Multilayer type CharacteristicsB Rated Voltage35VDC Capacitance change 1000000pF Within 15.0% 2200000pF4700000pF Within 15.0% tan 1000000pF 10.0% max 2200000pF4700000pF 10.0% max Specified Value High Permittivity Class2 Insulation resistance 1000000pF 2200000pF 4700000pF Rated Voltage50VDC Capacitance change 100pF39000pF 47000pF1000000pF tan 100pF39000pF 47000pF1000000pF 25M min 25M min 5M min Within 12.5% Within 15.0% 5.0% max 7.5% max Insulation resistance 1000M min 100pF39000pF 47000pF100000pF 500M min 220000pF 250M min 470000pF 100M min 1000000pF 50M min AppearanceNo significant abnomality Withstanding VoltageNo abnomality Rated Voltage:10VDC Capacitance change Within 30.0% tan: 4700000pF~10000000pF 20.0% max Insulation resistance: 4700000pF 10000000pF Multilayer type CharacteristicsF Rated Voltage:16VDC Capacitance change 10M min 5M min Within 30.0% tan: 220000pF470000pF 1000000pF 2200000pF 15.0% max 22.5% max 17.5% max Insulation resistance: 220000pF 470000pF 1000000pF 2200000pF 100M min 50M min 25M min 25M min To next page Withstanding voltage is also referred to as "voltage proof" under IEC specifications. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c_reli-PRP10 1 leaded_c_reli_e-01 RELIABILITYDATA AXIAL LEADED CERAMIC CAPACITORS 17Damp Heatsteady state Rated Voltage:25VDC Capacitance change Within 30% tan: 10000pF47000pF ItemJ :12.5% max Insulation resistance: 10000pF47000pF ItemJ 500M min Rated Voltage35VDC Capacitance change Within 30.0% tan: 10000000pF 20.0% max Insulation resistance: Specified High Permittivity Class2Multilayer type CharacteristicsF 10000000pF 5M min Value Rated Voltage:50VDC Capacitance change: 10000pF1000000pF Within 30.0% tan: 10000pF100000pF 12.5% max 220000pF470000pF 15.0% max 1000000pF 17.5% max Insulation resistance: 10000pF100000pF 500M min 220000pF470000pF 250M min 1000000pF 50M min Test Methods and Remarks Temperature402 Humidity90 to 95 % RH 24 Duration500hrs 0 hrs 0 Preconditioning1 hr of preconditioning at 15010 followed by 484 hrs of recovery under the standard condition. Recovery242 hrs of recovery under the standard condition after the removal from test chamber.Class 1 10 1 hr of preconditioning at 150 0 followed by 484 hrs of recovery under the standard condition after the removal from chamber.Class 2 18Loading under Damp Heat Specified Value AppearanceNo significant abnomality Withstanding VoltageNo abnomality Capacitance change 8.2pF or under Within 0.75pF Temperature 10pF or over Within 7.5% Multilayer type Compensating Class1 Q30pF or under Q10010/3*C 33pF or over Q200 Insulation resistance500M min CNominal Capacitance pF AppearanceNo significant abnomality Withstanding VoltageNo abnomality Rated Voltage16VDC Capacitance change 1200pF22000pF Within 12.5% ItemJ 220000pF470000pF Within 15.0% 1000000pF10000000pF Within 22.5% tan 1200pF22000pF 5.0% max ItemJ 220000pF470000pF 7.5% max 1000000pF2200000pF 10.0% max 4700000pF10000000pF 22.5% max Insulation resistance 1200pF22000pF ItemJ 500M min 220000pF 50M min 470000pF 25M min 1000000pF 12.5M min 2200000pF 5.0M min 4700000pF10000000pF 2.5M min Rated Voltage25VDC Capacitance change 10000000pF Within 22.5% tan 10000000pF 22.5% max Insulation resistance High Permittivity 2.5M min Class2Multilayer type CharacteristicsB 10000000pF Rated Voltage35VDC Capacitance change 1000000pF Within 15.0% 2200000pF Within 15.0% 4700000pF Within 22.5% tan 1000000pF 10.0% max 2200000pF4700000pF 10.0% max Insulation resistance 1000000pF 12.5M min 2200000pF 5.0M min 4700000pF 2.5M min Rated Voltage50VDC Capacitance change 100pF39000pF Within 12.5% 47000pF1000000p Within 15.0% tan 100pF39000pF 5.0% max 47000pF1000000pF 7.5% max Insulation resistance 100pF39000pF 500M min 47000pF100000pF 250M min 220000pF 125M min 470000pF 25M min 1000000pF 12.5M min To next page Withstanding voltage is also referred to as "voltage proof" under IEC specifications. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c_reli_e-01 1 leaded_c_reli-PRP11 RELIABILITYDATA AXIAL LEADED CERAMIC CAPACITORS 18Loading under Damp Heat AppearanceNo significant abnomality Withstanding VoltageNo abnomality Rated Voltage10VDC Capacitance change Within 30.0% tan 4700000pF10000000pF 20.0% max Insulation resistance 4700000pF 5M min 10000000pF 2.5M min Rated Voltage16VDC Capacitance change Within 30.0% tan 220000pF470000pF 15.0% max 1000000pF 22.5% max 2200000pF 17.5% max Insulation resistance 220000pF 50M min 470000pF 25M min 1000000pF 12.5M min 2200000pF 12.5M min Rated Voltage25VDC Specified High Permittivity Class2Multilayer type CharacteristicsF Capacitance change Within 30.0% Value tan 10000pF47000pF ItemJ 12.5% max Insulation resistance 10000pF47000pF ItemJ 250M min Rated Voltage35VDC Capacitance change Within 30.0% tan 10000000pF 20.0% max Insulation resistance 10000000pF 2.5M min Rated Voltage50VDC Capacitance change 10000pF1000000pF Within 30.0% tan 10000pF100000pF 12.5% max 220000pF470000pF 15.0% max 1000000pF 17.5% max Insulation resistance 10000pF100000pF 250M min 220000pF470000pF 125M min 1000000pF 25M min Test Methods and Remarks Temperature402 Humidity90 to 95 % RH 24 Duration500 0 hrs Applied voltageRated voltage 0 Preconditioning1 hr of preconditioning at 150 10 followed by 484 hrs of recovery under the standard condition. Recovery 242 hrs of recovery under the standard condition after the removal from test cham-ber.Class 1 1 hr of preconditioning at 150 10 0 followed by 484 hrs of recovery under the standard condition after the removal from chamber.Class 2 19High Temperature Lading Test AppearanceNo significant abnomality Withstanding VoltageNo abnomality Temperature Multilayer type Compensating Class1 Specified Value Capacitance change 8.2pF or under Within 0.3pF 10pF or over Within 3.0% Q200+10C Q 8.2pF or under 10pF30pF Q275+2.5C Q350 33pF or over Insulation resistance1000M min CNominal Capacitance[pF] AppearanceNo significant abnomality Withstanding VoltageNo abnomality Rated Voltage16VDC Capacitance change 1200pF22000pF Within 12.5% ItemJ 220000pF470000pF Within 15.0% 1000000pF10000000pF Within 22.5% tan 1200pF22000pF 5.0% max ItemJ High Permittivity Class2Multilayer type CharacteristicsB 220000pF470000pF 7.5% max 1000000pF2200000pF 10.0% max 4700000pF10000000pF 22.5% max Insulation resistance 1200pF22000pF ItemJ 1000M min 220000pF 125M min 470000pF 50M min 1000000pF 25M min 2200000pF 12.5M min 4700000pF10000000pF : 5.0M min To next page Withstanding voltage is also referred to as "voltage proof" under IEC specifications. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c_reli-PRP12 1 leaded_c_reli_e-01 RELIABILITYDATA AXIAL LEADED CERAMIC CAPACITORS 19High Temperature Lading Test Rated Voltage25VDC Capacitance change 10000000pF Within 22.5% tan 10000000pF 22.5% max Insulation resistance 10000000pF 5M min Rated Voltage35VDC Capacitance change 1000000pF Within 15.0% 2200000pF Within 15.0% 4700000pF Within 22.5% tan 1000000pF 10.0% max 2200000pF4700000pF 10.0% max Multilayer type CharacteristicsB Insulation resistance 1000000pF 25M min 2200000pF 25M min 4700000pF 5M min Rated Voltage50VDC Capacitance change 100pF39000pF Within 12.5% 47000pF~1000000pF Within 15.0% tan 100pF39000pF 5.0% max 47000pF1000000pF 7.5% max Insulation resistance 100pF39000pF 1000M min 47000pF100000pF 500M min 220000pF 250M min 470000pF 100M min 1000000pF 50M min AppearanceNo significant abnomality Withstanding VoltageNo abnomality Rated Voltage10VDC Capacitance change Within 30.0% tan Specified High Permittivity Class2 4700000pF10000000pF 20.0% max Value Insulation resistance 4700000pF 10M min 10000000pF 5M min Rated Voltage16VDC Capacitance change 30% tan 220000pF470000pF 15.0% max 1000000pF 22.5% max 2200000pF 17.5% max Insulation resistance 220000pF 100M min 470000pF 50M min 1000000pF 25M min 2200000pF 25M min Rated Voltage25VDC Multilayer type CharacteristicsF Capacitance change Within 30% tan 10000pF47000pF 10.0% max ItemJ Insulation resistance 10000pF47000pF ItemJ 500M min Rated Voltage35VDC Capacitance change Within 30.0% tan 10000000pF 20.0% max Insulation resistance 10000000pF 5M min Rated Voltage50VDC Capacitance change 10000pF1000000pF Within 30.0% tan 10000pF100000pF 10.0% max 220000pF470000pF 12.5% max 1000000pF 17.5% max Insulation resistance 10000pF100000pF 500M min 220000pF470000pF 250M min 1000000pF 50M min Test Methods and Remarks 3 Temperature85 0 48 Duration1000 0 hrs Applied voltage Rated voltagex2 Rated voltagex1.5 Class 2 B 1000000pF 025Type B 220000pF10000000pF 050Type, 075Type 10 Preconditioning1 hr of preconditioning at 150 0 followed by 484 hrs of recovery under the standard condition. Recovery 242hrs of recovery under the standard condition after the removal from test chamber.Class1 1 hr of preconditioning at 150 10 0 followed by 484 hrs of recovery under the standard condition after the removal from chamber.Class 2 Note on standard condition "standard condition" referred to herein is defined as follows 5 to 35 of temperature, 45 to 85% relative humidity, and 86 to 106kPa of air pressure. When there are questions concerning measurement results In order to provide correlation data, the test shall be conducted under condition of 202 of temperature, 60 to 70% relative humidity, and 86 to 106kPa of air pressure.Unless otherwise specified, all the tests are conducted under the "standard condition." Withstanding voltage is also referred to as "voltage proof" under IEC specifications. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c_reli_e-01 1 leaded_c_reli-PRP13 PRECAUTIONS 1. Circuit Design Verification of operating environment, electrical rating and performance 1. A malfunction in medical equipment, spacecraft, nuclear reactors, etc. may cause serious harm to human life or have severe social ramifications. As such, any capacitors to be used in such equipment may require higher safety and/or reliability considerations and should be clearly differentiated from components used in general purpose applications. Verification of Rated voltageDC rated voltage 1. The operating voltage for capacitors must always be lower than their rated values. If an AC voltage is loaded on a DC voltage, the sum of the two peak voltages should be lower than the rated value of the capacitor chosen. For a circuit where both an AC and a pulse voltage may be present, the sum of their peak voltages should also be lower than the capacitor's rated voltage. Self-generated heat (Verification of Temperature) Precautions 1. If the capacitors specified only for DC use are used in AC or pulse circuits, the AC or a pulse current can generate heat inside the capacitor so the selfgenerated temperature rise should be limited to within 20. The surface temperature measured should include this self-temperature rise. Therefore, it is required to limit capacitor surface temperature including self -generated heat should not exceed the maximum operating temperature of +85. Operating Environment precautions 1. Capacitors should not be used in the following environments: 1 Environmental conditions to avoid a. exposure to water or salt water. b. exposure to moisture or condensation. c. exposure to corrosive gases (such as hydrogen sulfide, sulfurous acid, chlorine, and ammonia) 1-1. When an AC or a pulse voltage is applied to capacitors specified for DC use, even if the voltage is less than the rated voltage, the AC current or pulse current running through the capacitor will cause the capacitor to self-generate heat because of the loss characteristics. The amount of heat generated depends on the dielectric materials used, capacitance, applied voltage, frequency, voltage waveform, etc. The surface temperature changes due to emitted heat which differs by capacitor shape or mounting method. Please contact Taiyo Yuden with any questions regarding emitted heat levels in your particular application. It is recommended the temperature rise be measured in the actual circuit to be used. 1-2. For capacitors, the voltage and frequency relationship is generally determined by peak voltage at low frequencies, and by self-generated heat at high frequencies. (Refer to the following curve.) Technical considerations 2. PCB Design Design of the capacitor mount 1. When capacitors are mounted onto a PC board, hole dimensions on the board should match the lead pitch of the component, if not it will cause breakage of the Precautions terminals or cracking of terminal roots covered with resin as excess stress travels through the terminal legs. As a result, humidity resistance performance would be lost and may lead to a reduction in insulation resistance and cause a withstand voltage failure. 3. Considerations for automatic insertion Adjustment Automatic Insertion machinesleaded components Precautions 1. When inserting capacitors in a PC board by auto-insertion machines the impact load imposed on the capacitors should be minimized to prevent the leads from chucking or clinching. Technical When installing products, care should be taken not to apply distortion stress as it may deform the products. considerOur company recommends the method to place the lead with fewer loads that join the product. ations 4. Soldering Selection of Flux 1. When soldering capacitors are on the board, flux should be applied thinly and evenly. 2. Flux used should be with less than or equal to 0.1 wt% (equivalent to Chroline) of halogenated content. Flux having a strong acidity content should not be applied. 3. When using water-soluble flux, special care should be taken to properly clean the boards. Precautions Technical considerations Wave Soldering 1. Temperature, time, amount of solder, etc. are specified in accordance with the following recommended conditions. 2. Do not immerse the entire capacitor in the flux during the soldering operation. Only solder the lead wires on the bottom of the board. Recommended conditions for using a soldering iron: 1. Put the soldering iron on the land-pattern. Soldering iron's temperature - below 350 Duration - 3 seconds or less Numbers of times - 1 times The soldering iron should not directly touch the capacitor. Selection of Flux 1. Flux is used to increase solderability in wave soldering, but if too much is applied, a large amount of flux gas may be emitted and may detrimentally affect solderability. To minimize the amount of flux applied, it is recommended to use a flux-bubbling system. 2. With too much halogenated substance (Chlorine, etc.) content is used to activate the flux, an excessive amount of residue after soldering may lead to corrosion of the terminal electrodes or degradation of insulation resistance on the surface of the capacitors. 3. Since the residue of water-soluble flux is easily dissolved by water content in the air, the residue on the surface of capacitors in high humidity conditions may cause a degradation of insulation resistance and therefore affect the reliability of the components. The cleaning methods and the capability of the machines used should also be considered carefully when selecting water-soluble flux. Wave Soldering 1. If capacitors are used beyond the range of the recommended conditions, heat stresses may cause cracks inside the capacitors, and consequently degrade the reliability of the capacitors. 2. When the capacitors are dipped in solder, some soldered parts of the capacitor may melt due to solder heat and cause short-circuits or cracking of the ceramic material. Deterioration of the resin coating may lower insulation resistance and cause a reduction of withstand voltage. Recommended conditions for using a soldering iron: 1.If products are used beyond the range of the recommended conditions,heat stress may deform the products,and consequently degrade the reliability of the products. This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c_reli-PRP14 1 leaded_c_reli_e-01 PRECAUTIONS 5. Cleaning Precautions Technical considerations Board cleaning 1. When cleaning the mounted PC boards, make sure that cleaning conditions are consistent with prescribed usage conditions. 1. The resin material used for the outer coating of capacitors is occasionally a wax substance for moisture resistance which can easily be dissolved by some solutions. So before cleaning, special care should be taken to test the component s vulnerability to the solutions used. When using water-soluble flux please clean the PCB with purified water sufficiently and dry thoroughly at the end of the process. Insufficient washing or drying could lower the reliability of the capacitors. 6. Post-cleaning-process Application of resin molding, etc. to the PCB and components. 1. Please contact your local Taiyo Yuden sales office before performing resin coating or molding on mounted capacitors. Please verify on the actual application that Precautions the coating process will not adversely affect the component quality. Technical considerations 1-1. The thermal expansion and coefficient of contraction of the molded resin are not necessarily matched with those of the capacitor. The capacitors may be exposed to stresses due to thermal expansion and contraction during and after hardening. This may lower the specified characteristics and insulation resistance or cause reduced withstanding voltage by cracking the ceramic or separating the coated resin from the ceramics. 1-2. With some types of mold resins, the resin's decomposition gas or reaction gas may remain inside the resin during the hardening period or while left under normal conditions, causing a deterioration of the capacitor's performance. 1-3. Some mold resins may have poor moisture proofing properties. Please verify the contents of the resins before they are applied. 1-4. Please contact Taiyo Yuden before using if the hardening process temperature of the mold resins is higher than the operating temperature of the capacitors. 7. Handling Mechanical considerations Precautions 1. Be careful not to subject the capacitors to excessive mechanical shocks. Withstanding voltage failure may result. 2. If ceramic capacitors are dropped onto the floor or a hard surface they should not be used. Technical 1. Because the capacitor is made of ceramic, mechanical shocks applied to the board may damage or crack the capacitors. consider2. Ceramic capacitors which are dropped onto the floor or a hard surface may develop defects and have a higher risk of failure over time. ations 8. Storage conditions Storage 1. To maintain the solderability of terminal electrodes and to keep the packaging material in good condition, care must be taken to control temperature and humidity in the storage area. Humidity should especially be kept as low as possible. Recommended conditions: Ambient temperature Below 40 Humidity Below 70% RH. Precautions Products should be used within 6 months after delivery. After the above period, the solderability should be checked before using the capacitors. 2. Capacitors should not be kept in an environment filled with decomposition gases such as sulfurous hydrogen, sulfurous acid, chlorine, ammonia, etc. 3. Capacitors should not be kept in a location where they may be exposed to moisture, condensation or direct sunlight. Technical 1. Under high temperature/high humidity conditions, the decrease in solderability due to the oxidation of terminal electrodes and deterioration of taping and packaging considercharacteristics may be accelerated. ations This catalog contains the typical specification only due to the limitation of space. When you consider purchase of our products, please check our specification. For details of each product (characteristics graph, reliability information, precautions for use, and so on), see our Web site (http://www.ty-top.com/) or CD catalogs. leaded_c_reli_e-01 1 leaded_c_reli-PRP15