Flush Silhouette Switches LB/LBW Series 16mm LB Series Miniature Switches & Pilot Lights Extended illuminated Pushbutton Ringilluminated Pushbutton LBW Series Flush Silhouette Switches LB Series Flush Silhouette Switches o16mm LB Series Miniature Switches and Pilot Lights S t y lis h a nd Functi onal IDEC's extensive range of LB/LBW series switches can be used for a wide range of applications. Flush Silhouette LB Series Flush Silhouette Switches Slim 2mm-thick bezels for stylish panels. LBW Series Flush Silhouette Switches Smart appearance with large surface for secure operation. 2mm Flush Silhouette Projects only 2mm from the panel surface. For sleek and refined style. LB Series Bezel LBW Series Bezel o22/22mm o26/26mm New LBW series with o26/26mm bezels. Large button surface for easy usability. Ideal for frequently used switches such as STOP and START. (Actual size) Miniature Switches and Pilot Lights o16mm LB Series Miniature Switches and Pilot Lights Short body for spacesaving installation. 27.9 Conventional mm 45mm Short Body Depth of only 27.9mm behind panel. Reduces the size of machines and control panels. Compact Flush Silhouette & Miniature Switches and Pilot Lights Removable Contact Block /Single Board Mounting Waterproof Removable contacts enable easy wiring / Single board mounting for space-saving installation. Degree of protection: IP65 Detachable P.52 Detachable & Single Board For details on UP series 2 New UP series has the same depth as LB/ LBW series. Mounts on the same panel. (Flush bezel: 34.9mm, standard bezel: 27.9mm) Waterproof LB Series and LBW Series For diverse applications Extended Illuminated Pushbutton RingIlluminated Pushbutton Flush silhouette switches and o16mm miniature switches and pilot lights. Wide variety of switches to choose from. New LBW series with large operator surface for easy usability. 3 S EL EC TIO N LB SERIES Flush Silhouette Switches Slim 22mm G U ID E Actual Size Thinnest in the industry (as of February 2011) Protection degree: IP65 (IEC 60529) For sleek and refined style * Panel cutout (mm) 2mm Round o18.2 Illuminated Pushbuttons Illuminated pushbuttons with switch guard available Pushbuttons Marking plates can be used with lens style pushbuttons *Does not light on. Pushbuttons with switch guard available Pilot Lights Dome Pilot Lights Selector Switches 2-position and 3-position selector switches. Maintained and other various spring return actions available. *Photo: lever operator (knob operator also available) Illuminated selector switches available Key Selectors ensure safety Wave Key Seven different keys to choose from. Key removable in desired positions. Buzzer Protection degree: IP54 Steady sound at 80 dB minimum (at 0.1m) Lever Switches Degree of protection: IP67 Up/down operation. 2- and 3-positions available. For 3-position switches, maintained and return two-way actions available. 4 Square 18.2 Rectangular 18.2 x 24.2 LBWSERIES Flush Silhouette Switches Projects only 2mm from the panel. Removable contact blocks ideal for single board mounting. o26/26 bezel size for easy operation. Slim Thinnest in the industry (as of May 2012) 26mm 2mm Actual Size For sleek and refined style Round Round Square Illuminated Pushbuttons Illuminated pushbuttons with switch guard available Ring-illuminated Pushbuttons Pushbuttons Marking plates can be used with lens style pushbuttons Pushbuttons with switch guard available *Does not light on. Pilot Lights Selector Switches 2-position and 3-position selector switches. Maintained and spring return actions available. Key Selectors ensure safety Seven different keys to choose from. Key removable in desired positions. Wave Key Stylish Appearance with Advanced Functions Illuminated Selector Switch (LB series only) Operation status is easily visible due to illumination on the operator. Switch guard prevents inadvertent switch operation Round Illuminated Pushbutton Color Variations A (amber) G (green) PW (pure white) R (red) S (blue) W (white) Ring-Illuminated Pushbutton Color Variations R (red) G (green) A (amber) W (white) S (blue) PW (pure white) Square Rectangular (LB series only) Pushbutton Color Variations Y (yellow) B (black) G (green) R (red) S (blue) W (white) Bezel Color Variations Y (yellow) Metallic Black Ring-Illuminated Pushbutton Bezels Square Black Square Black Round Metallic Round Metallic 5 S EL EC TIO N o16mm LB SERIES Miniature Switches and Pilot Lights (Standard Bezel) Short Shortest in the industry (as of February 2011) Panel depth of only 27.9mm. Removable contact blocks ideal for single board mounting. Protection degree: IP65 (IEC 60529) G U ID E Actual Size For space-saving installation 27.9mm Round Square Rectangular Illuminated Pushbuttons With 3-sided barrier Pushbuttons Marking plates can be used with lens style pushbuttons With 3-sided barrier *Does not light on. Pilot Lights With 3-sided barrier Dome Pilot Lights Selector Switches 2- and 3-position selector switches. Maintained and other various spring return actions available. *Photo: knob operator (lever operator also available) Illuminated selector switches available Key Selectors ensure safety Wave Key Seven different keys to choose from. Key removable in desired positions. Buzzers IP54 IP40 Steady sound at 80 dB minimum (at 0.1m) IP54 tab terminals, PC board terminal, and IP40 solder terminals available. Terminal side Terminal side Lever Switches Degree of protection: IP67 Up/down operation. 2- and 3-positions available. For 3-position switches, maintained and return two-way actions available. 6 Illuminated Pushbutton Color Variations Pushbutton Color Variations R (red) G (green) Y (yellow) A (amber) W (white) S (blue) PW (pure white) B (blue) G (green) R (red) Y (yellow) S (blue) W (white) Flush Silhouette Switches LB Series Flush Silhouette Switches LBW Series o16mm LB Series Switches and Pilot Lights Flush bezel projects only 2 mm from front of panel. Standard bezel with only a panel depth of 27.9 mm. Removable contact blocks ideal for single board mounting. Mark LB Series Flush Silhouette LBW Series **Pushbuttons, selector switches, and key selector switches with up to 3PDT contacts. **Wave keys are used for key selector switches to prevent LB Series duplication of keys. Six different keys are available besides standard key. **Black or metallic flush bezels available. **Bright and clear illumination surface. LED illumination. **Gold-clad, cross-bar contact, or high-capacity silver contacts. **Protection degree: IP65 (IEC60529) Applicable Standards Flush Silhouette o16 LB Series UP Series File No. or Organization UL Recognition No.E55996 UL508 CSA 22.2 No.14 CSA File No. LR 21451 TUV Rheinland EN60947-5-1 EU Low Voltage Directive Contact IDEC for approval file no. GB14048.5 * See page 49 for approval ratings. Contact Ratings Gold Contact (switch base: blue) Rated Insulation Voltage Rated Thermal Current Rated Operating Voltage Rated Operating Current (electrical life: 100,000 operations) Contact Material 250V 3A 30V DC 125V AC Resistive Load 0.1A 0.1A Gold-clad silver *M inimum applicable load (reference value): 5V AC/DC, 1 mA Applicable range is subject to the operating conditions and load. * See electrical life in Specifications. Resistive load Inductive load Resistive load Inductive load Resistive load Inductive load Resistive load Inductive load 30V -- -- 5A 2A -- -- 3A 1A Rated Thermal Current Contact Material * AC inductive load: PF=0.6 to 0.7 250V 125V 250V 5A 5A 3A 1.5A 1.1A -- 0.4A -- 5A 3A 3A 1.5A 0.6A -- 0.22A -- 5A Silver DC inductive load: L/R=7 ms max. LED Ratings Rated Voltage Voltage Range LED Part No. Current Draw Voltage Marking LED Life (reference value) 5V DC 5V DC5% LB9Z-LED5 A, R, W: 18 mA G, S: 6 mA PW: 5 mA Specifications Operating Temperature Silver Contact (switch base: gray) Rated Insulation Voltage Rated Operating Voltage Electrical AC 50/60Hz Life 50,000 Rated operations DC Operating Electrical AC Current 50/60Hz Life 100,000 operations DC LBW Series 12V AC/DC 24V AC/DC 12V AC/DC10% 24V AC/DC 10% LB9Z-LED1 LB9Z-LED2 Storage Temperature Operating Humidity Contact Resistance Electrical Life (minimum operations) Marked on the side of the LED unit Approx. 30,000 hours [until the brightness reduces to 50% of the initial value when lit at the rated voltage (direct current) under 25C environment.] Terminal Style A, G, R, PW, SW LED Chip X2 (-) Zener Diode X2 Resistor * (color code): A (amber), G (green), PW (pure white), R (red), S (blue), W (white) * Use the pure white (PW) module for yellow illumination. * LED lamp contains a current-limiting resistor. 50 mW maximum (initial value) Pilot Light 100 MW minimum (500V DC megger) Between live part and ground: 2,000V AC, 1 minute Between terminals of different poles: Switch Unit 2,000V AC, 1 minute Dielectric Between terminals of the same poles: Strength 1,000V AC, 1 minute Illumination Between live part and ground: Unit 2,000V AC, 1 minute Operating extremes/Damage limits: Vibration Resistance 5 to 55 Hz, amplitude 0.5 mm Operating extremes: 100 m/s2 Shock Resistance Damage limits: 1,000 m/s2 Momentary: 2,000,000 Maintained:250,000 Mechanical Life 250,000 (minimum operations) Selector switches Key selector switches 250,000 Degree of Protection X1 (+) Illuminated Pushbutton Insulation Resistance X1 Internal Circuit -25 to +60C (no freezing) Illuminated units: -25 to +55C -30 to +80C (no freezing) 45 to 85% RH (no condensation) Weight (approx.) Pushbutton Selector Illuminated Selector Key Selector Lever Switch Buzzer Accessories Maintenance Parts Momentary: 50,000 / 100,000 (*1) Maintained: 50,000 / 100,000 (*2) Selector switches: 50,000 / 100,000 (*2) Key selector switches: 50,000 / 100,000 (*2) IP65 (IEC 60529) Solder/tab terminal #110 PC board terminal 15g (LB8GL-M1T24) 11g (LB3L-M1T24) 14g (LB8GB-M1T2) 10g (LB3P-1T04) 16g (LBW7L-M1T24) 10g (LB3B-M1T2) 14g (LBW7P-1T04) 12g (LB3S-2T2) 15g (LBW7B-M1T2) 25g (LB3K-2ST2A) 17g (LBW7S-2T2) 14g (LB8L-M1T24) 29g (LBW7K-2ST2A) 13g (LB8P-1T04) 17g (LBW7GL-M1T24) 13g (LB8B-M1T2) 18g (LBW7GB-M1T2) 15g (LB8S-2T2) 27g (LB8K-2ST2A) * 1: Switching frequency 1,800 operations/h. * 2: Switching frequency 1,200 operations/h. 7 Panel Cut-out Instructions Flush Silhouette Switches LB Series Illuminated Pushbuttons Illuminated Pushbuttons Solder/Tab Terminal Part No. / Shape LB Package Quantity:1 L- 1 T Round / Black Bezel Round / Metallic Bezel Shape Square / Black Bezel Square / Metallic Bezel Rectangular / Metallic Bezel Operation Momentary Black bezel Maintained Momentary Metallic bezel Maintained Momentary Guard Type Maintained Contact Gold/SPDT Gold/DPDT Gold/SPDT Gold/DPDT Gold/SPDT Gold/DPDT Gold/SPDT Gold/DPDT Gold/SPDT Gold/DPDT Gold/SPDT Gold/DPDT Round with Guard LED Operating Voltage 24V AC/DC 24V AC/DC 24V AC/DC 24V AC/DC 24V AC/DC 24V AC/DC Rectangular / Black Bezel Square with Guard Part No. Rectangular with Guard * Illumination Color Code LBL-M1T14* LBL-M1T24* LBL-A1T14* LBL-A1T24* LBL-M1T14* LBL-M1T24* LBL-A1T14* LBL-A1T24* LBL-M1T14* LBL-M1T24* LBL-A1T14* LBL-A1T24* Specify the color code in place of * in the Part No. A: G: PW: R: S: W: Y: amber green pure white red blue white yellow * Illuminated pushbuttons contain an LED unit. For details on LED units, see page 60. * The guard opens 180 degrees spring-return. * Illuminated pushbuttons can be used with legend markings. Engraving can be done on a marking plate which is placed in the lens, or a clear film can be printed and placed in the lens. See page 63 for details on the marking plate and film. * White lens type (when light is off) are available. Clear lens is used instead of colored lens for amber, green, red, and blue illuminated pushbuttons. Amber, green, red, or blue LED units are used. To specify, see Part Number Development below. * PC board terminals available for gold contacts. Silver contacts also available. To specify, see Part Number Development below. * 5V DC and 12V AC/DC LED operating voltages also available. * Other bezel sizes available (LBW series). For details, see page 24. Part Number Development LB L- 1 T Shape Code 6 7 8 6M 7M 8M 6G 7G 8G Operation Shape Round / Black Bezel Square / Black Bezel Rectangular / Black Bezel Round / Metallic Bezel Square / Metallic Bezel Rectangular / Metallic Bezel Round with Guard Square with Guard Rectangular with Guard Code Operation A Maintained M Momentary Contacts Code 1 2 5 6 LED Operating Voltage Contact Gold/SPDT Gold/DPDT Silver/SPDT Silver/DPDT Code 1 3 4 Others Code Specification Blank Solder/Tab Terminal W White Lens Type (When Light is Off) V PC Board Terminal (Gold Contact Only) Part No. Example -- LB6L-M1T14W* LB6L-M1T14V* White Lens Type (When Light is Off) with PC Board Terminal (Gold Contact Only) LB6L-M1T14VW* * Specify the color code in place of * in the table above. * Color code for white lens type (when light is off) : A (amber), G (green), R (red), S (blue) VW 8 Rated Operating Voltage 5V DC 12V AC/DC 24V AC/DC Flush Silhouette Switches LB Series Illuminated Pushbuttons Dimensions Flush Silhouette LB Series Flush Silhouette Round Gasket 1.2 2 2-R0.6 Square Square 22 22 11 22.5 Mounting Bracket 6.95 6.95 Solder/Tab Terminal 24.2 0.8W x 0.5t LOCK Rectangular 1 Rectangular 22 30.4 6 3 2 17.8 5.5 11 22.5 6 5 3 1 2.8W x 0.5t 5 15.8 17.8 o16 LB Series UP Series o22 3.85 3.85 Locking Ring o2 Round 11 22.5 2.6 1 LBW Series Panel Thickness: 0.5 to 3.2 mm Panel Thickness: 0.5 to 3.2 mm Gasket [PC Board Terminal] 7 27.9 2 [Solder/Tab Terminal] 2 28 5.2 [With Guard] 28 [With Guard] All dimensions in mm. Terminal Arrangement (Bottom View) Panel Cut-out for Positioning Round (LB6L/LB6ML/LB6GL) TOP 22 TOP Lamp Terminal (+) Lamp Terminal (-) 12 X1 24 14 X2 Lamp Terminal (-) 21 4- R0 X1 X2 .5 or les s o18 .2 0.1 11 Illuminated Pushbutton 17.10.05 Lamp Terminal (+) (SPDT contacts on the right only) Pilot Light 1.9 0.05 Pushbutton Mounting Hole Layout o1 8. 2 Square (LB7/LB7ML/LB7GL) 18.2 0.2 0 0 0 .2 Illuminated Selector Square (LB8L/LB8ML/LB8GL) 18.2 +0.2 Round (LB6L/LB6ML/LG6GL) Selector Key Selector 24.2 +0.2 0 Lever Switch * 22 min * 22 min 22 min Buzzer * Accessories Maintenance Parts 22 min 22 min 28 min Panel Cut-out Instructions * 45 mm minimum for switches with guard Note: When using rubber boot or terminal cover, see dimensions on page 57 and 58. * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. 9 Flush Silhouette Switches LB Series Pilot Lights Pilot Lights Solder/Tab Terminal Part No. / Shape Package Quantity:1 LB P - T0 Round / Black Bezel Lens Shape Shape Square / Black Bezel Rectangular / Black Bezel LED Operating Voltage Dome / Black Bezel Round / Metallic Bezel Part No. Black Bezel 24V AC/DC LBP-1T04* Metallic Bezel 24V AC/DC LBP-1T04* Black Bezel 24V AC/DC LB6P-2T04* Metallic Bezel 24V AC/DC LB6MP-2T04* Square / Metallic Bezel Rectangular / Metallic Bezel Dome / Metallic Bezel * Illumination Color Code Specify the color code in place of * in the Part No. Flush A: G: PW: R: S: W: Y: Dome amber green pure white red blue white yellow * Pilot lights contain an LED unit. For maintenance LED units see page 60. * Legends and symbols can be engraved on a marking plate or film to be inserted under the lens by users for labelling purposes. See page 63 for details. * White lens type (when light is off) are available. Clear lens is used instead of colored lens for amber, green, red, and blue pilot lights. Amber, green, red, or blue LED units are used. To specify, see Part Number Development below. * PC board terminals available. To specify, see Part Number Development below. * 5V DC and 12V AC/DC LED operating voltages also available. * Other bezel sizes available (LBW series). For details, see page 26. Part Number Development LB P - T0 Shape Code 6 7 8 6M 7M 8M Shape Round / Black Bezel Square / Black Bezel Rectangular / Black Bezel Round / Metallic Bezel Square / Metallic Bezel Rectangular / Metallic Bezel Lens Shape LED Operating Voltage Code Lens Shape 1 Flush 2 Dome Code 1 3 4 * Round only for dome. Others Code Blank W V VW Specification Solder/Tab Terminal White Lens Type (When Light is Off) PC Board Terminal White Lens Type (When light is Off) with PC Board Terminal Part No. Example -- LB6P-1T04W* LB6P-1T04V* LB6PPM1T04VW* * Specify the color code in place of * in the table above. * Color code for white lens type (when light is off) : A (amber), G (green), R (red), S (blue) 10 Rated Operating Voltage 5V DC 12V AC/DC 24V AC/DC Flush Silhouette Switches LB Series Pilot Lights Dimensions Flush Silhouette LB Series Flush Silhouette LBW Series Panel Thickness: 0.5 to 3.2 mm Round o2 Gasket 2.6 Locking Ring UP Series 2-R0.6 1.2 1 o16 LB Series 2 Square Solder/Tab Terminal Mounting Bracket 22 0.8W x 0.5t Rectangular 2.8W x 0.5t 3 3 22 17.8 15.8 3 3 LOCK 2 5.5 17.8 7 [PC Board Terminal] 28 2 27.9 [Flush, Solder/Tab Terminal] [Flush] [Dome] 7.4 2.0 All dimensions in mm. [Dome] Terminal Arrangement (Bottom View) Panel Cut-out for Positioning Illuminated Pushbutton Round (LB6P/LB6MP) R0 .5 X1 or Pushbutton les s o18 Selector .2 0.1 X2 Illuminated Selector 17.10.05 Lamp Terminal (+) Lamp Terminal (-) Pilot Light 4- TOP Key Selector 1.9 0.05 Lever Switch Mounting Hole Layout o1 8. 2 Buzzer Square (LB7P/LB7MP) 18.2 +0 0 .2 Square (LB8P/LB8MP) 18.2 +0.2 0 Round (LB6P/LB6MP) +0.2 0 24.2 Accessories +0.2 0 Maintenance Parts 22 min 22 min 22 min Panel Cut-out 22 min 22 min Instructions 28 min Note: When using rubber boot or terminal cover, see dimensions on page 57 and 58. * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. 11 Flush Silhouette Switches LB Series Pushbuttons Pushbuttons Solder/Tab Terminal Package Quantity:1 Part No. / LB B - 1 T Shape Round / Black Bezel Round / Metallic Bezel Shape Button Style Square / Black Bezel Square / Metallic Bezel Rectangular / Metallic Bezel Operation Contact SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT Momentary Button Maintained Black bezel Momentary Lens Maintained Momentary Button Maintained Metallic bezel Momentary Lens Maintained Momentary Button Maintained Guard Type Momentary Lens Maintained Rectangular / Black Bezel Round with Guard Square with Guard Part No. Gold Contact Silver Contact LBB-M1T1* LBB-M1T5* LBB-M1T2* LBB-M1T6* LBB-M1T3* LBB-M1T7* LBB-A1T1* LBB-A1T5* LBB-A1T2* LBB-A1T6* LBB-A1T3* LBB-A1T7* LBB-M1T1L* LBB-M1T5L* LBB-M1T2L* LBB-M1T6L* LBB-M1T3L* LBB-M1T7L* LBB-A1T1L* LBB-A1T5L* LBB-A1T2L* LBB-A1T6L* LBB-A1T3L* LBB-A1T7L* LBB-M1T1* LBB-M1T5* LBB-M1T2* LBB-M1T6* LBB-M1T3* LBB-M1T7* LBB-A1T1* LBB-A1T5* LBB-A1T2* LBB-A1T6* LBB-A1T3* LBB-A1T7* LBB-M1T1L* LBB-M1T5L* LBB-M1T2L* LBB-M1T6L* LBB-M1T3L* LBB-M1T7L* LBB-A1T1L* LBB-A1T5L* LBB-A1T2L* LBB-A1T6L* LBB-A1T3L* LBB-A1T7L* LBB-M1T1* LBB-M1T5* LBB-M1T2* LBB-M1T6* LBB-M1T3* LBB-M1T7* LBB-A1T1* LBB-A1T5* LBB-A1T2* LBB-A1T6* LBB-A1T3* LBB-A1T7* LBB-M1T1L* LBB-M1T5L* LBB-M1T2L* LBB-M1T6L* LBB-M1T3L* LBB-M1T7L* LBB-A1T1L* LBB-A1T5L* LBB-A1T2L* LBB-A1T6L* LBB-A1T3L* LBB-A1T7L* Rectangular with Guard * Color Code B: G: R: S: W: Y: black green red blue white yellow A: G: R: S: W: Y: amber green red blue white yellow B: G: R: S: W: Y: black green red blue white yellow A: G: R: S: W: Y: amber green red blue white yellow B: G: R: S: W: Y: black green red blue white yellow A: G: R: S: W: Y: amber green red blue white yellow * The guard opens 180 degrees spring-return. * Pushbuttons can be used with legend markings. Engraving can be done on a marking plate which is placed in the lens, or a clear film can be printed and placed in the lens. See page 63 for details on the marking plate and film. * Black is available for lens. Black lens consists of a transparent lens and a black marking plate. To specify, see Part Number Development below. * PC board terminals available for gold contacts. To specify, see Part Number Development below. * Other bezel sizes available (LBW series). For details, see page 28. Part Number Development Shape Code 6 7 8 6M 7M 8M 6G 7G 8G 12 Shape Round / Black Bezel Square / Black Bezel Rectangular / Black Bezel Round / Metallic Bezel Square / Metallic Bezel Rectangular / Metallic Bezel Round with Guard Square with Guard Rectangular with Guard LB B- 1T Operation Code Operation A Maintained M Momentary Contacts Code Contact 1 Gold/SPDT 2 Gold/DPDT 3 Gold/3PDT Code Contact 5 Silver/SPDT 6 Silver/DPDT 7 Silver/3PDT Others Code Specification Blank Solder/Tab Terminal B Black Translucent Lens (Lens Only) V PC Board Terminal (Gold Contact Only) Part No. Example -- LB6B-M1T1LB LB6B-M1T1V* Flush Silhouette Switches LB Series Pushbuttons Dimensions Flush Silhouette LB Series Flush Silhouette 2.6 Panel Thickness: 0.5 to 3.2 mm Gasket Gasket All dimensions in mm. LBW Series o16 LB Series 1.2 Round 3.85 3.85 Locking Ring UP Series Round 2 o2 o22 11 2-R0.6 Mounting Bracket 6.95 6.95 * Solder/Tab Terminal 22.5 1 Panel Thickness: 0.5 to 3.2 mm Square Square 22 22 [3PDT] 22.5 11 8 8 8 8 1.95 1.95 [SPDT/DPDT] 24.2 0.8W x 0.5t 2.8W x 0.5t 17.8 Rectangular 5.5 [SPDT/DPDT] 22 11 22.5 1 30.4 6 2 2 * 7 [PC Board Terminal] LOCK Rectangular 6 5 5 15.8 17.8 1 LOCK 27.9 2 28 5.2 [Solder/Tab Terminal] 28 [With Guard] [With Guard] Terminal Arrangement (Bottom View) Panel Cut-out for Positioning SPDT/DPDT Contacts Round (LB6B/LB6MB/LB6GB) TOP 11.1 3PDT Contacts TOP 23 4- TOP 22 12 32 22 12 32 14 24 14 34 24 14 34 11 21 11 31 21 11 31 22 12 24 21 [3PDT] (SPDT contacts on the right only) Pushbutton TOP R0 . 5 22 o rl 24 o18 Pilot Light Selector es 12 .2 0.1 21 (SPDT contacts on the right only) Illuminated Selector s 14 11 Key Selector 17.10.05 20.8 18.8 11.9 Illuminated Pushbutton Lever Switch 1.9 0.05 Buzzer Mounting Hole Layout o1 8. 2 Square (LB7B/LB7MB/LB7GB) 18.2+0.2 0 +0 0 .2 Rectangular (LB8B/LB8MB/LB8GB) 18.2 +0.2 0 Round (LB6B/LB6MB/LB6GB) 24.2 Accessories Maintenance Parts +0.2 0 Panel Cut-out 22 min 2 22 min 2 22 min 2 Instructions 22 min 1 22 min 28 min 1 *1: 23.2 mm minimum for 3PDT *2: 45 mm minimum for switches with guard Note: When using rubber boot or terminal cover, see dimensions on page 57 and 58. * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. 13 Flush Silhouette Switches LB Series Selector Switches Selector Switches Solder/Tab Terminal Part No. / Shape Package Quantity:1 LB S - T Knob Operator Round / Black Bezel Square / Black Bezel Rectangular / Black Bezel Round / Metallic Bezel Square / Metallic Bezel Rectangular / Metallic Bezel Lever Operator Round / Metallic Bezel Square / Metallic Bezel Operator Position Shape L Black bezel 45 3-position C Metallic bezel SPDT LBS-2T1 LBS-2T5 LBS-2T2 LBS-2T6 3PDT LBS-2T3 LBS-2T7 R DPDT LBS-3T2 LBS-3T6 3PDT LBS-3T3 LBS-3T7 DPDT LBS-33T2 LBS-33T6 3PDT LBS-33T3 LBS-33T7 L Spring return two-way L C R 45 3-position C Silver Contact DPDT Maintained L Gold Contact R SPDT LBS-2T1 LBS-2T5 R DPDT LBS-2T2 LBS-2T6 3PDT LBS-2T3 LBS-2T7 LBS-3T2 LBS-3T6 Maintained 90 2-position Part No. Contact Maintained 90 2-position Rectangular / Metallic Bezel Maintained L R DPDT 3PDT LBS-3T3 LBS-3T7 Spring return two-way L C R DPDT LBS-33T2 LBS-33T6 3PDT LBS-33T3 LBS-33T7 * Lever operators also available. To specify, see Part Number Development below. * PC board terminals available for gold contacts. To specify, see Part Number Development below. * 2-position spring return from right, 3-position spring return from right, and 3-position spring return from left also available. To specify, see Part Number Development below. * For contact operation, see page 48. * Other bezel sizes available (LBW series). For details, see page 30. Part Number Development LB S- T Operator Position Shape Code 6 7 8 6M 7M 8M Shape Round / Black Bezel Square / Black Bezel Rectangular / Black Bezel Round / Metallic Bezel Square / Metallic Bezel Rectangular / Metallic Bezel Operator Code Blank L 14 Operator Shape Knob Lever 3-position 2-position Operator Position 2 Maintained 21 Spring return from right L R L R Contacts Code 1 2 3 5 6 7 Contact Gold/SPDT (90 2-position only) Gold/DPDT Gold/3PDT Silver/SPDT (90 2-position only) Silver/DPDT Silver/3PDT 3 Maintained L C R Operator Position 31 Spring 32 Spring return from return from right left L C R L C R 33 Spring return twoway L C R Others Code Specification Blank Solder/Tab Terminal PC Board Terminal V (Gold Contact Only) Part No. Example -- LB6S-2T1V Flush Silhouette Switches LB Series Selector Switches Dimensions Flush Silhouette LB Series Flush Silhouette Panel Thickness: 0.5 to 3.2 mm LBW Series Gasket Locking Ring 1.2 3.85 2.6 UP Series 3.85 1 o16 LB Series Round 2-R0.6 Round 2 Solder/Tab Terminal 2 o2 Mounting Bracket 6.95 6.95 o2 1.95 1.95 [SPDT/DPDT] Square 8 8 8 8 Square [3PDT] 0.8W x 0.5t Rectangular Rectangular 22 6 5 22 6 1 1 5 17.8 15.8 2 17.8 2 5.5 [SPDT/DPDT] 22 22 2.8W x 0.5t LOCK [PC Board Terminal] 7 28 8.5 27.9 28 [Knob Operator] [Knob Operator PC Board Terminal] [Lever Operator] LOCK 20.8 18.8 11.9 All dimensions in mm. 11.1 23 [3PDT] Panel Cut-out for Positioning SPDT/DPDT Contacts Round (LB6S/LB6MS) 21 3PDT Contacts TOP 22 12 12 14 24 14 11 21 11 32 22 34 12 24 31 21 4- TOP TOP 32 22 R0 .5 12 14 34 24 14 11 31 21 11 or Key Selector s o18 Lever Switch .2 0.1 22 min Buzzer Accessories Maintenance Parts Rectangular (LB8S/LB8MS) 18.2 +0.2 0 18.2 +0 0 .2 +0.2 0 24.2 Panel Cut-out +0.2 0 Instructions 22 min 22 min 2 Square (LB7S/LB7MS) 22 min 8. Illuminated Selector 1.9 0.05 Mounting Hole Layout o1 Selector les (SPDT contacts on the right(SPDT only) contacts on the right only) Round (LB6S/LB6MS) Pushbutton 17.10.05 24 Pilot Light [Lever Operator] Terminal Arrangement (Bottom View) TOP 22 Illuminated Pushbutton 2 11.1 22 min 28 min *: 23.2 mm minimum for 3PDT Note: When using rubber boot or terminal cover, see dimensions on page 58. * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. 15 Flush Silhouette Switches LB Series Illuminated Selector Switches Illuminated Selector Switches Solder/Tab Terminal Part No. / Shape Package Quantity:1 LB F- T Square / Black Bezel Round / Black Bezel Shape Operator Position 90 2-position Black bezel 45 3-position 90 2-position Metallic bezel 45 3-position * * * * Maintained Maintained Maintained Maintained L L R C L L R R C R Round / Metallic Bezel Part No. Gold Contact Silver Contact Contact LED Operating Voltage SPDT 24V AC/DC LBF-2T14* LBF-2T54* DPDT 24V AC/DC LBF-2T24* LBF-2T64* DPDT 24V AC/DC LBF-3T24* LBF-3T64* SPDT 24V AC/DC LBF-2T14* LBF-2T54* DPDT 24V AC/DC LBF-2T24* LBF-2T64* DPDT 24V AC/DC LBF-3T24* LBF-3T64* * Illumination Color Code Specify the color code in place of * in the Part No. G: green R: red W: white Illuminated selector switches contain an LED unit. For maintenance LED units see page 60. PC board terminals available for gold contacts. To specify, see Part Number Development below. 5V DC and 12V AC/DC LED operating voltages also available. To specify, see Part Number Development below. For contact operation, see page 48. Part Number Development LB F- T Operator Position Shape Code Shape 6 Round / Black Bezel 6M Round / Metallic Bezel 2-position Operator Position 2 Maintained 3 Maintained L LED Operating Voltage Code 1 3 4 16 Rated Operating Voltage 5V DC 12V AC/DC 24V AC/DC Contacts 3-position L R C R Code 1 2 5 6 Contact Gold/SPDT (90 2-position only) Gold/DPDT Silver/SPDT (90 2-position only) Silver/DPDT Others Code Specification Blank Solder/Tab Terminal V PC Board Terminal (Gold Contact Only) * Specify a color code in place of * in the Part No. Part No. Example -- LB6F-2T14V* Flush Silhouette Switches LB Series Illuminated Selector Switches Dimensions Flush Silhouette LB Series Flush Silhouette 2.6 1 LBW Series Panel Thickness: 0.5 to 3.2 mm o16 LB Series Gasket UP Series 3.85 3.85 6.95 1.2 2-R0.6 6.95 Locking Ring Solder/Tab Terminal Mounting Bracket 0.8W x 0.5t LOCK 2.8W x 0.5t 2 1 o2 6 1 5 3 6 5 3 17.8 15.8 2 17.8 Round 5.5 7 2.4 27.9 10.3 [PC Board Terminal] [Solder/Tab Terminal] All dimensions in mm. Terminal Arrangement (Bottom View) Lamp Terminal (+) TOP 22 TOP 12 X1 24 Lamp Terminal (-) 14 X2 21 Lamp Terminal (+) Lamp Terminal (-) X1 X2 11 Illuminated Pushbutton (SPDT contacts on the right only) Pilot Light Pushbutton Mounting Hole Layout Panel Cut-out for Positioning Round (LB6F/LB6MF) Round (LB6F/LB6MF) 8. 4- R0 +0 0 .2 .5 Key Selector or les Lever Switch s o18 .2 0.1 22 min 2 Illuminated Selector Buzzer 17.10.05 o1 Selector Accessories 1.9 0.05 Maintenance Parts 22 min Panel Cut-out Note: When using terminal cover, see dimensions on page 58. Instructions * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. 17 Flush Silhouette Switches LB Series Key Selector Switches Key Selector Switches Solder/Tab Terminal Part No. / Shape Package Quantity:1 LB K - T - Round / Black Bezel Shape Square / Black Bezel Operator Position 90 2-position Maintained 45 3-position Maintained A: Key removable in all positions 90 2-position Maintained A: Key removable in all positions L 45 3-position Maintained A: Key removable in all positions L Metallic bezel Round / Metallic Bezel Key Removable Position A: Key removable in all positions Black bezel * * * * * * * * Rectangular / Black Bezel L L Contact R C R R C R Square / Metallic Bezel Rectangular / Metallic Bezel Part No. SPDT DPDT 3PDT Gold Contact LBK-2ST1A LBK-2ST2A LBK-2ST3A Silver Contact LBK-2ST5A LBK-2ST6A LBK-2ST7A DPDT LBK-3ST2A LBK-3ST6A 3PDT LBK-3ST3A LBK-3ST7A SPDT DPDT 3PDT LBK-2ST1A LBK-2ST2A LBK-2ST3A LBK-2ST5A LBK-2ST6A LBK-2ST7A DPDT LBK-3ST2A LBK-3ST6A 3PDT LBK-3ST3A LBK-3ST7A For operator position, see Part Number Development below. For key removable position, see Part Number Development below. The key cannot be removed at the return position. Two keys are supplied. Besides the standard key (key number 0H), six other keys are available. To specify, see Part Number Development below. Disc tumbler keys also available. Only the standard key is available. To specify, see Part Number Development below. PC board terminals available for gold contacts. To specify, see Part Number Development below. For contact operation, see page 48. Other bezel sizes available (LBW series). For details, see page 32. Part Number Development LB K- T - Shape Code 6 7 8 6M 7M 8M Shape Round / Black Bezel Square / Black Bezel Rectangular / Black Bezel Round / Metallic Bezel Square / Metallic Bezel Rectangular / Metallic Bezel Operator Position Code 2 21 3 31 32 33 Operator Position 90 2-position maintained 90 2-position spring return from right 45 3-position maintained 45 3-position spring return from right 45 3-position spring return from left 45-3-position spring return two-way Key Style Code Key Style S Wave key Disc tumbler Blank key Contacts Code 1 2 3 5 6 7 18 Key Number Code Blank Standard key (0H) 1H to 2H Reversible key 3H to 6H Non-reversible key Key Removal Position 2-position Key Removable Position A: Key removable B: Key removable C: Key removable in all positions at left at right L L R L R R 3-position Key Removable Position A: Key removable in all positions L C B: Key removable at left / center L R E: Key removable at right / left L C C L R G:Key removable at left R L C C: Key removable at center / right C D: Key removable at center R L C R H: Key removable at right R L C R For key selectors with the following operations, the key cannot be removed at the return position. L 3-position Spring return from right L C * Wave key only. Contact Gold/SPDT (90 2-position only) Gold/DPDT Gold/3PDT Silver/SPDT (90 2-position only) Silver/DPDT Silver/3PDT L R Spring return from right R Spring return from left L C R Spring return two-way L C R * Key is removable at L , C , R . Key is retained at L , C , and R . Others Code Specification Blank Solder/Tab Terminal PC Board Terminal V (Gold Contact Only) Part No. Example -- LB6K-2ST1VA 2 Flush Silhouette Switches LB Series Key Selector Switches Dimensions Flush Silhouette LB Series Key Selector Switches with Wave Key o16 LB Series 3.85 2.6 UP Series Round 2-R0.6 6.95 Solder/Tab Terminal 2 o2 Mounting Bracket 6.95 1.2 LBW Series Panel Thickness: 0.5 to 3.2 mm Locking Ring 3.85 1 Flush Silhouette Gasket 1.95 Square 8 8 8 8 1.95 [SPDT/DPDT] [3PDT] LOCK 1 2 5.5 [3PDT] 22 14 6 2 23 7 27.9 [Solder/Tab Terminal] [PC Board Terminal] 28 24.3 Key No. :N/A to 2H 8.5 5.5 [SPDT/DPDT] Rectangular 6 5 5 20.8 18.8 11.9 17.8 15.8 11.1 17.8 22 2.8W x 0.5t 0.8W x 0.5t 1 LOCK Key Selector Switches with Disc Tumbler Key 2.6 1.2 Panel Thickness: 0.5 to 3.2 mm Gasket Locking Ring Illuminated Pushbutton 3.85 3.85 1 Key No. :3H to 6H Round 2-R0.6 Pushbutton Mounting Bracket 6.95 6.95 Solder/Tab Terminal Pilot Light 2 o2 Selector 1.95 1.95 [SPDT/DPDT] Illuminated Selector Square Lever Switch 8 8 8 8 Key Selector Buzzer [3PDT] 22 0.8W x 0.5t Maintenance Parts 22 2 5.5 23 7 27.9 [3PDT] [PC Board Terminal] TOP 22 32 22 TOP 12 4 14 24 14 34 24 14 1 11 21 11 31 21 11 contacts on the right only) All dimensions in mm. TOP 12 Instructions 28 3PDT Contacts TOP 12 18.1 [Solder/Tab Terminal] Terminal Arrangement (Bottom View) SPDT/DPDT Contacts Panel Cut-out 6 2 11.1 [SPDT/DPDT] Accessories Rectangular 6 1 5 5 20.8 18.8 11.9 17.8 15.8 17.8 2.8W x 0.5t 1 LOCK LOCK 32 22 12 * For 34 details24on mounting hole layout, see page 49. 14 * For details on pc board and circuit design, see page 50. 11 * For 31 details21on single board mounting, see page 51. (SPDT contacts on the right only) 19 Flush Silhouette Switches LB Series Lever Switches Lever Switches Solder/Tab Terminal Package Quantity: 1 Part No. / Shape Round / Black Bezel Shape Operator Position Contact Maintained LB6T-2T1 LB6T-2T5 DPDT LB6T-2T2 LB6T-2T6 3PDT LB6T-2T3 LB6T-2T7 DPDT LB6T-3T2 LB6T-3T6 D 3PDT LB6T-3T3 LB6T-3T7 U DPDT LB6T-33T2 LB6T-33T6 3PDT LB6T-33T3 LB6T-33T7 2-position D Maintained U C 3-position Spring return from top/bottom C D * PC board terminals available for gold contacts. Add "V" to the Part No. Example: LB6T-2T1V * For contact operation, see page 48. 20 Silver Contact SPDT U Black bezel Part No. Gold Contact Flush Silhouette Switches LB Series Lever Switches Dimensions 1 Flush Silhouette LB Series Flush Silhouette Panel Thickness: 0.5 to 3.2 mm 2.6 LBW Series o16 LB Series Gasket UP Series 3.85 1.2 3.85 Locking Ring 2-R0.6 Mounting Bracket 6.95 6.95 Solder/Tab Terminal 8 8 8 8 1.95 1.95 [SPDT/DPDT] [3PDT] 0.8W x 0.5t o2 6 1 5 6 5 17.8 15.8 2 17.8 [SPDT/DPDT] 2 0.8W x 0.5t 1 LOCK 5.5 7 27.9 4.4 17 [PC Board Terminal] [Solder/Tab Terminal] 18.8 11.9 20.8 LOCK Illuminated Pushbutton 11.1 23 Pilot Light All dimensions in mm. [3PDT] Pushbutton Terminal Arrangement (Bottom View) SPDT/DPDT Contacts TOP 3PDT Contacts TOP Mounting Hole Layout Selector Round (LB6T) Illuminated Selector o 18 TOP TOP .2 12 22 12 32 22 12 32 22 +0 .2 0 12 Key Selector 4 14 24 14 34 24 14 34 24 14 Lever Switch 1 11 21 11 31 21 11 31 21 11 contacts on the right only) (SPDT contacts on the right only) 22 min 2 Buzzer Accessories Panel Cut-out for Positioning Round (LB6T) 4- R0 .5 or Maintenance Parts 22 min * Panel Cut-out *: 23.2 mm minimum for 3PDT Note: When using terminal cover, see dimensions on page 58. Instructions les .2 0.1 17.10.05 s o18 1.9 0.05 * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. 21 Flush Silhouette Switches LB Series Buzzers Buzzers Specifications Rated Insulation Voltage Rated Operating Voltage Operating Voltage Range Current Draw Inrush Current Sound Pressure (at 0.1m) Sound Frequency Response Speed Operating Temperature Storage Temperature Operating Humidity Insulation Resistance Dielectric Strength Vibration Resistance Shock Resistance Life Degree of Protection Terminal Style Weight (approx.) Standards 30V 12, 24V DC 12V DC10%, 24V DC10% 26 mA 80 mA maximum Steady sound: 80 dB minimum (at the rated voltage) 2.30.3kHz 50 ms maximum -25 to +60C (no freezing) -30 to +80C(no freezing) 45 to 85% (no condensation) 100 M minimum (500V DC megger) Between live and dead parts: 1,000V AC, 1 minute Operating extremes/Damage limits: 5 to 55 Hz, amplitude 0.5 mm Operating extremes: 100m/s2 Damage limits:1,000m/s2 1,000 hours minimum (beep sound) IP54 (IEC60529) Solder/tab terminal #110 PC board terminal 13g (round), 14g (square) Safety Standards Mark File No. or Organization UL60947-1 UL60947-4-1A UL Recognition File No.E68961 CSA C22.2 No.14 CSA File No.LR21451 EN60947-5-1 EN61000-6-4 EMC Directive * UL, CSA ratngs: Operating voltage 12, 24V DC. Package Quantity: 1 Part No. / Shape Round / Black Bezel Shape Black bezel Metallic bezel Round Rectangular Round Rectangular Rectangular / Black Bezel Operating Voltage Degree of Protection 24V DC 24V DC 24V DC 24V DC IP54 IP54 IP54 IP54 Round / Metallic Bezel Rectangular / Metallic Bezel Part No. Terminal Style Solder/tab terminal PC board terminal LB6Z-1T04 LB6Z-1T04V LB8Z-1T04 LB8Z-1T04V LB6MZ-1T04 LB6MZ-1T04V LB8MZ-1T04 LB8MZ-1T04V * 12V DC operating voltages also available. Specify "-1T04" in place of "-1T03" in the Part No. Example: LB6Z-1T03 22 Flush Silhouette Switches LB Series Buzzers Dimensions Flush Silhouette LB Series Flush Silhouette 2.6 1 LBW Series Panel Thickness: 0.5 to 3.2 mm Gasket Locking Ring o16 LB Series 1.2 UP Series 2-R0.6 Round Solder/Tab Terminal LOCK 2.8W x 0.5t Rectangular 3 3 0.8W x 0.5t 3 3 22 15.8 17.8 2 o2 Mounting Bracket 2 17.8 5.5 7 27.9 28 2 [Solder/Tab Terminal] [PC Board Terminal] All dimensions in mm. Terminal Arrangement (Bottom View) Panel Cut-out for Positioning Round (LB6Z/LB6MZ) Buzzer terminal (+) 4- R0 X1 Buzzer terminal (-) .5 X2 or les s o18 .2 0.1 Mounting Hole Layout o1 8. 2 Illuminated Pushbutton 1.9 0.05 Pilot Light Rectangular (LB8Z/LB8MZ) 18.2 +0.2 0 Round (LB6Z/LB6MZ) 17.10.05 TOP +0 0 .2 24.2 Pushbutton +0.2 0 Selector 22 min 22 min Illuminated Selector Key Selector Lever Switch 22 min Buzzer 28 min Accessories Note: When using rubber boot or terminal cover, see dimensions on page 57 and 58. Maintenance Parts Panel Cut-out * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. Instructions 23 Flush Silhouette Switches LBW Series Illuminated Pushbuttons Illuminated Pushbuttons Solder/Tab Terminal Part No. / Shape Package Quantity:1 LBWL-T Flush Round / Black Bezel Square / Black Bezel Extended Round / Metallic Bezel Square with Guard Flush Ring-illuminated (black bezel is also available) Shape Square / Metallic Bezel Round with Guard (black bezel is also available) Operation Contact Gold/SPDT Gold/DPDT Gold/SPDT Gold/DPDT Gold/SPDT Gold/DPDT Gold/SPDT Gold/DPDT Gold/SPDT Gold/DPDT Gold/SPDT Gold/DPDT LED Operating Voltage Part No. * Illumination Color Code LBWL-MT14* LBWL-MT24* Black bezel LBWL-AT14* Specify the color code in place Maintained 24V AC/DC of * in the Part No. LBWL-AT24* LBWL-MT14* A: amber Momentary 24V AC/DC LBWL-MT24* G: green Metallic bezel PW: pure white LBWL-AT14* Maintained 24V AC/DC R: red LBWL-AT24* S: blue LBWL-MT14* W: white Momentary 24V AC/DC Y: yellow LBWL-MT24* Guard Type LBWL-AT14* Maintained 24V AC/DC LBWL-AT24* * Flush/Extended color code: A (amber), G (green), PW (pure white), R (red), S (blue), W (white), Y (yellow) * Ring-illuminated color code: PW (pure white), W (white), WA (amber), WG (green), WR (red), WS (blue) * Illuminated pushbuttons contain an LED unit. For details on LED units, see page 60. * The guard opens 180 degrees spring-return. * Illuminated pushbuttons can be used with legend markings. Engraving can be done on a marking plate which is placed in the lens, or a clear film can be printed and placed in the lens. See page 64 for details on the marking plate and film. * White lens type (when light is off) are available. Clear lens is used instead of colored lens for amber, green, red, and blue illuminated pushbuttons. Amber, green, red, or blue LED units are used. To specify, see Part Number Development below. * PC board terminals available for gold contacts. Silver contacts also available. To specify, see Part Number Development below. * Extended style is available. See Part Number Development below (). * Flush ring-illuminated style is available. See Part Number Development below (). Guard is not available with flush ring-illuminated style. * 5V DC and 12V AC/DC LED operating voltages also available. * Other bezel sizes available (LB series). For details, see page 8. Momentary 24V AC/DC Part Number Development LBWL-T Shape Code 6 7 6M 7M 6G 7G Shape Round / Black Bezel Square / Black Bezel Round / Metallic Bezel Square / Metallic Bezel Round with Guard Square with Guard LED Operating Voltage Code 1 3 4 24 Rated Operating Voltage 5V DC 12V AC/DC 24V AC/DC Operation Code Operation A Maintained M Momentary Contacts Code Operator Style 1 Flush 2 Extended 1R Flush Ring-illuminated Code 1 2 5 6 Contact Gold/SPDT Gold/DPDT Silver/SPDT Silver/DPDT Others Code Blank Solder/Tab Terminal W Specification Part No. Example -- White Lens Type (When Light is Off) LBW6L-M1T14W* PC Board Terminal (Gold Contact Only) LBW6L-M1T14V* White Lens Type (When Light is Off) with PC Board Terminal VW LBW6L-M1T14VW* (Gold Contact Only) * Specify the color code in place of * in the table above. * Color code for white lens type (when light is off) : A (amber), G (green), R (red), S (blue) V Flush Silhouette Switches LBW Series Illuminated Pushbuttons Dimensions Flush Silhouette LB Series Flush Silhouette LBW Series Flush/Ring-illuminated Panel Thickness: 0.5 to 3.2 mm 3.85 3.85 6.95 6.95 * Solder/Tab Terminal Mounting Bracket Round o26 13 28.7 27 Round 6 2-R0.6 o2 1.2 UP Series Gasket Gasket Locking Ring 2.6 1 o16 LB Series Panel Thickness: 0.5 to 3.2 mm Square Square 27 1 5 3 13 6 5 17.8 15.8 2.8W x 0.5t 6 1 3 0.8W x 0.5t 37.4 LOCK * [PC Board Terminal] 2 2 27.9 7 26 5.2 [Solder/Tab Terminal] [With Guard] [With Guard] o1 6 .4 Extended 26 Round Square o2 6 2 5.5 17.8 Panel Thickness: 0.5 to 3.2 mm Gasket 3.85 3.85 Locking Ring 16.4 26 Illuminated Pushbutton 6.95 6.95 Ring-illuminated Pilot Light Mounting Bracket All dimensions in mm. [PC Board Terminal] 7 X1 14 X2 Maintenance Parts Mounting Hole Layout Lamp Terminal (+) Lamp Terminal (-) o2 2. 3 +0 0. .2 0 Panel Cut-out Square (LBW7/LBW7M) 22.5 X1 +0.2 0.0 X2 11 (SPDT contacts on the right only) * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. 26 min. 21 Accessories 26 min. Lamp Terminal (-) Buzzer Round (LBW6/LBW6M) TOP 12 24 Lever Switch 2 [Solder/Tab Terminal] TOP 22 Key Selector 4.6 27.9 Terminal Arrangement (Bottom View) Lamp Terminal (+) 6 o20.2 6 2 5.5 17.8 Selector Illuminated Selector 6 1 5 5 17.8 15.8 Round 2.8W x 0.5t 1 0.8W x 0.5t o2 LOCK Pushbutton 26 min. 26 min. *: 53 mm minimum for switches with guard. 25 Instructions Flush Silhouette Switches LBW Series Pilot Lights Pilot Lights Solder/Tab Terminal Package Quantity:1 Part No. / LBW P - 1 T0 Shape Round / Black Bezel Shape LED Operating Voltage Square / Black Bezel Round / Metallic Bezel Part No. Square / Metallic Bezel * Illumination Color Code Specify the color code in place of * in the Part No. Black Bezel 24V AC/DC LBWP-1T04* Metallic Bezel 24V AC/DC LBWP-1T04* A: G: PW: R: S: W: Y: amber green pure white red blue white yellow * Pilot lights contain an LED unit. For maintenance LED units see page 60. * Legends and symbols can be engraved on a marking plate or film to be inserted under the lens by users for labelling purposes. See page 64 for details. * White lens type (when light is off) are available. Clear lens is used instead of colored lens for amber, green, red, and blue pilot lights. Amber, green, red, or blue LED units are used. To specify, see Part Number Development below. * PC board terminals available. To specify, see Part Number Development below. * 5V DC and 12V AC/DC LED operating voltages also available. * Other bezel sizes available (LBW series). For details, see page 10. Part Number Development LBW P - 1 T 0 Shape Code 6 7 6M 7M Shape Round / Black Bezel Square / Black Bezel Round / Metallic Bezel Square / Metallic Bezel LED Operating Voltage Code 1 3 4 Rated Operating Voltage 5V DC 12V AC/DC 24V AC/DC Others Code Blank W V VW Specification Solder/Tab Terminal White Lens Type (When Light is Off) PC Board Terminal White Lens Type (When light is Off) with PC Board Terminal Part No. Example -- LBW6P-1T04W* LBW6P-1T04V* LBW6P-1T04VW* * Specify the color code in place of * in the table above. * Color code for white lens type: A (amber), G (green), R (red), and S (blue) only. 26 Flush Silhouette Switches LBW Series Pilot Lights Dimensions Flush Silhouette LB Series Flush Silhouette LBW Series Panel Thickness: 0.5 to 3.2 mm 2.6 1 o16 LB Series Gasket UP Series Locking Ring Round 6 1.2 o2 2-R0.6 Solder/Tab Terminal Mounting Bracket LOCK 0.8W x 0.5t Square 3 3 17.8 15.8 3 3 2.8W x 0.5t 2 5.5 17.8 7 [PC Board Terminal] 27.9 2 [Solder/Tab Terminal] 26 All dimensions in mm. Terminal Arrangement (Bottom View) TOP Lamp Terminal (+) Lamp Terminal (-) X1 X2 Illuminated Pushbutton Panel Cut-out for Positioning Pilot Light Round (LBW6P/LBW6MP) Pushbutton o2 +0 1.9 Selector 0 -0.1 .2 0 Illuminated Selector 21.6 +0.10 2.3 Key Selector Lever Switch Buzzer Mounting Hole Layout Round (LBW6P/LBW6MP) o2 2. 3 Accessories Square (LBW7P/LBW7MP) Maintenance Parts +0.2 22.5 0.0 +0 0. .2 0 Panel Cut-out 26 min. 26 min. Instructions 26 min. 26 min. * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. 27 Flush Silhouette Switches LBW Series Pushbuttons Pushbuttons Solder/Tab Terminal Part No. / Shape Package Quantity:1 LBW B - 1 T Flush Extended Round / Black Bezel Square / Black Bezel Round / Metallic Bezel Square / Metallic Bezel Round with Guard Square with Guard Round only (metallic bezel available) Shape Button Style Operation Momentary Black bezel Button Maintained Momentary Metallic bezel Button Maintained Momentary Guard Type Button Maintained Contact SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT SPDT DPDT 3PDT Part No. Gold Contact Silver Contact LBWB-M1T1* LBWB-M1T5* LBWB-M1T2* LBWB-M1T6* LBWB-M1T3* LBWB-M1T7* LBWB-A1T1* LBWB-A1T5* LBWB-A1T2* LBWB-A1T6* LBWB-A1T3* LBWB-A1T7* LBWB-M1T1* LBWB-M1T5* LBWB-M1T2* LBWB-M1T6* LBWB-M1T3* LBWB-M1T7* LBWB-A1T1* LBWB-A1T5* LBWB-A1T2* LBWB-A1T6* LBWB-A1T3* LBWB-A1T7* LBWB-M1T1* LBWB-M1T5* LBWB-M1T2* LBWB-M1T6* LBWB-M1T3* LBWB-M1T6* LBWB-A1T1* LBWB-A1T5* LBWB-A1T2* LBWB-A1T6* LBWB-A1T3* LBWB-A1T7* * Illumination Color Code Specify the color code in place of * in the Part No. B: G: R: S: W: Y: black green red blue white yellow * The guard opens 180 degrees spring-return. * PC board terminals available for gold contacts. To specify, see Part Number Development below. * Pushbuttons can be used with legend markings engraved on marking plates and lens buttons with clear film inserted in the lens is available. To specify, see Part Number Development below. See page 63 for details on the marking plate and film. * Extended pushbuttons available. To specify, see Part Number Development below. Pushbuttons with guard is not available. Extended pushbuttons is available with momentary operation only. * Other bezel sizes available (LB series). For details, see page 12. Part Number Development LBW B- 1T Shape Code 6 7 6M 7M 6G 7G Operation Shape Round / Black Bezel Square / Black Bezel Round / Metallic Bezel Square / Metallic Bezel Round with Guard Square with Guard Code Operation A Maintained M Momentary Others Code Blank L (Note 1) V VL (Note 1) Specification Solder/Tab Terminal Lens PC Board Terminal (Gold Contact Only) PC Board Terminal with Lens (Gold Contact Only) Operator Style Code Operation 1 Flush 2 Extended * * Extended style is available only for round (black/metallic bezel) and in momentary operation. Guard model is not available. Part No. Example -- LBW6B-M1T1L* LB6WB-M1T1V* LB6WB-M1T1VL* Note 1: Codes L and VL are available with flush operator only. * Color code (*) for lens: A (amber), B (translucent lens with black nameplate), G (green), R (red), S (blue), W (white), Y (yellow) 28 Contacts Code Contact 1 Gold/SPDT 2 Gold/DPDT 3 Gold/3PDT Code Contact 5 Silver/SPDT 6 Silver/DPDT 7 Silver/3PDT Flush Silhouette Switches LBW Series Pushbuttons Dimensions Flush Silhouette LB Series Flush Silhouette Flush Pushbutton Gasket o16 LB Series Gasket Locking Ring 2.6 1.2 UP Series 3.85 3.85 1 All dimensions in mm. LBW Series Panel Thickness: 0.5 to 3.2 mm Panel Thickness: 0.5 to 3.2 mm Solder/Tab Terminal Mounting Bracket 6.95 6.95 2-R0.6 1.95 1.95 [SPDT/DPDT] 6 o2 Round 13 27 o26 28.7 8 8 8 8 Round [3PDT] 0.8W x 0.5t 37.4 Square 1 Square 13 6 27 5 5 17.8 15.8 2.8W x 0.5t 6 1 LOCK 2 5.5 17.8 [SPDT/DPDT] [PC Board Terminal] 20.8 27.9 5.2 2 [Solder/Tab Terminal] 26 [With Guard] 26 [With Guard] 18.8 11.9 LOCK 2 7 11.1 23 [3PDT] Extended Pushbutton Illuminated Pushbutton Panel Thickness: 0.5 to 3.2 mm Gasket Pilot Light Locking Ring Pushbutton 3.85 2.6 3.85 1 Selector 6.95 * Solder/Tab Terminal 6.95 1.2 2-R0.6 Illuminated Selector Mounting Bracket Key Selector Lever Switch 8 8 8 8 1.95 1.95 [SPDT/DPDT] Buzzer Accessories Maintenance Parts [3PDT] LOCK 6 6 2 5.5 7 27.9 222 [PC Board Terminal] TOP 11.1 23 Instructions 3PDT Contacts TOP TOP 12 22 12 32 22 12 32 24 14 24 14 34 24 14 34 21 11 21 11 31 21 11 31 [Solder/Tab Terminal] (SPDT contacts on the right only) 18.8 11.9 20.8 4.1 Panel Cut-out Terminal Arrangement (Bottom View) SPDT/DPDT Contacts * [SPDT/DPDT] LOCK 6 o2 1 1 5 5 17.8 15.8 17.8 Round 2.8W x 0.5t 0.8W x 0.5t (SPDT contacts on the right only) * For details on mounting hole layout, see page 49. * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. [3PDT] 29 Flush Silhouette Switches LBW Series Selector Switches Selector Switches Solder/Tab Terminal Part No. / Shape Package Quantity:1 LBW S - T Round / Black Bezel Square / Black Bezel Operator Position Shape Contact Maintained 90 2-position L Maintained Black bezel 45 3-position L Spring return two-way R C R L C R Maintained 90 2-position L Maintained Metallic bezel 45 3-position Round / Metallic Bezel L Spring return two-way R C R L C R Square / Metallic Bezel Part No. Gold Contact Silver Contact SPDT LBWS-2T1 LBWS-2T5 DPDT LBWS-2T2 LBWS-2T6 3PDT LBWS-2T3 LBWS-2T7 DPDT LBWS-3T2 LBWS-3T6 3PDT LBWS-3T3 LBWS-3T7 DPDT LBWS-33T2 LBWS-33T6 3PDT LBWS-33T3 LBWS-33T7 SPDT LBWS-2T1 LBWS-2T5 DPDT LBWS-2T2 LBWS-2T6 3PDT LBWS-2T3 LBWS-2T7 DPDT LBWS-3T2 LBWS-3T6 3PDT LBWS-3T3 LBWS-3T7 DPDT LBWS-33T2 LBWS-33T6 DPDT LBWS-33T3 LBWS-33T7 * PC board terminals available for gold contacts. To specify, see Part Number Development below. * For contact operation, see page 48. * Other bezel sizes available (LB series). For details, see page 14. Part Number Development LB W S - T Shape Code 6 7 6M 7M Shape Round / Black Bezel Square / Black Bezel Round / Metallic Bezel Square / Metallic Bezel Operator Position 3-position 2-position Operator Position 2 Maintained L R Operator Position 3 Maintained 33 Spring return twoway L C R L C R Contacts Code 1 2 3 5 6 7 30 Contact Gold/SPDT (90 2-position only) Gold/DPDT Gold/3PDT Silver/SPDT (90 2-position only) Silver/DPDT Silver/3PDT Others Code Specification Blank Solder/Tab Terminal V PC Board Terminal (Gold Contact Only) Part No. Example -- LBW6S-2T1V Flush Silhouette Switches LBW Series Selector Switches Dimensions Flush Silhouette LB Series Flush Silhouette LBW Series Panel Thickness: 0.5 to 3.2 mm Gasket Locking Ring 3.85 1.2 UP Series 3.85 2.6 1 o16 LB Series 2-R0.6 Mounting Bracket 6.95 6.95 Solder/Tab Terminal [SPDT/DPDT] 8 8 8 8 1.95 1.95 Round 6 o2 [3PDT] LOCK 6 1 1 6 5 5 17.8 15.8 Square 2.8W x 0.5t 0.8W x 0.5t 2 17.8 [SPDT/DPDT] 20.8 [PC Board Terminal] 2 13 27.9 26 [Solder/Tab Terminal] 18.8 11.9 LOCK 7 5.5 11.1 Illuminated Pushbutton All dimensions in mm. 23 Pilot Light [3PDT] Terminal Arrangement (Bottom View) Panel Cut-out for Positioning SPDT/DPDT Contacts Round (LBW6S/LBW6MS) TOP TOP TOP TOP o2 12 22 12 32 22 12 32 22 12 14 24 14 34 24 14 34 24 14 11 21 11 31 21 11 31 21 11 2.3 +0 1.9 Selector Illuminated Selector 0 -0.1 .2 0 Key Selector 21.6 +0.10 3PDT Contacts Pushbutton Lever Switch Buzzer ontacts on the right only)(SPDT contacts on the right only) Accessories Maintenance Parts Mounting Hole Layout Round (LBW6S/LBW6MS) Instructions 2. 22.5 +0 0. .2 0 26 min. 3 +0.2 0.0 26 min. o2 Panel Cut-out Square (LBW7S/LBW7MS) 26 min. 26 min. * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. 31 Flush Silhouette Switches LBW Series Key Selector Switches Key Selector Switches Solder/Tab Terminal Part No. / Shape Package Quantity:1 LBW K - T - Wave Key Disc Tumbler Key Round / Black Bezel Shape Square / Black Bezel Operator Position 90 2-position Round / Metallic Bezel Square / Metallic Bezel Round /Metallic Bezel Square / Metallic Bezel Key Removable Position A: Key removable in all positions Maintained L R Black bezel 45 3-position A: Key removable in all positions Maintained 90 2-position L A: Key removable in all positions Maintained C L R R Metallic bezel 45 3-position * * * * * * * * A: Key removable in all positions Maintained L C Gold Contact Part No. Silver Contact SPDT LBWK-2ST1A LBWK-2ST5A DPDT LBWK-2ST2A LBWK-2ST6A 3PDT LBWK-2ST3A LBWK-2ST7A DPDT LBWK-3ST2A LBWK-3ST6A Contact R 3PDT LBWK-3ST3A LBWK-3ST7A SPDT LBWK-2ST1A LBWK-2ST5A DPDT LBWK-2ST2A LBWK-2ST6A 3PDT LBWK-2ST3A LBWK-2ST7A DPDT LBWK-3ST2A LBWK-3ST6A 3PDT LBWK-3ST3A LBWK-3ST7A For operator position, see Part Number Development below. For key removable position. see Part Number Development below. The key cannot be removed at the return position. Two keys are supplied. Besides the standard key (key number 0H), six other keys are available. Disc tumbler keys also available. Only the standard key is available. To specify, see Part Number Development below. PC board terminals available for gold contacts. To specify, see Part Number Development below. For contact operation, see page 48. Other bezel sizes available (LB series). For details, see page 18. Part Number Development LBW K- T - Shape Code 6 7 6M 7M Operator Position Shape Round / Black Bezel Square / Black Bezel Round / Metallic Bezel Square / Metallic Bezel Key Style Code Operator Position 2 90 2-position maintained 3 45 3-position maintained 33 45-3-position spring return two-way Key Removal Position The key cannot be removed at the return position. 3-position 2-position Key Removable Position Key Removable Position A: Key removable D: Key removable A: Key removable B: Key removable in all positions at center in all positions at left L R L R L C R 3-position Spring return two-way L C L C R * Key is removable at L , C , R . Key is retained at L , C , and R . Code Key Style S Wave key Blank Disc tumbler key Contacts Code 1 2 3 5 6 7 Contact Gold/SPDT (90 2-position only) Gold/DPDT Gold/3PDT Silver/SPDT (90 2-position only) Silver/DPDT Silver/3PDT Key Number Code 0H Standard key 1H to 2H Reversible key 3H to 6H Non-reversible key * Wave keys only. R Others Code Specification Blank Solder/Tab Terminal V PC Board Terminal (Gold Contact Only) 32 Part No. Example -- LBW6K-2T1VA Flush Silhouette Switches LBW Series Key Selector Switches Dimensions Flush Silhouette LB Series Flush Silhouette Key Selector Switches with Wave Key o16 LB Series 3.85 1.2 UP Series 3.85 2.6 1 LBW Series Panel Thickness: 0.5 to 3.2 mm Gasket Locking Ring 2-R0.6 Round 6 o2 6.95 6.95 Solder/Tab Terminal Mounting Bracket 8 8 8 8 1.95 1.95 [SPDT/DPDT] Square [3PDT] LOCK 2.8W x 0.5t 5.5 14 1 2.6 1.2 2 17.8 [SPDT/DPDT] 26 6 6 5 5 1 15.8 17.8 0.8W x 0.5t 2 1 7 27.9 24.3 [Solder/Tab Terminal] Key No. :N/A to 2H [PC Board Terminal] 8.5 18.8 11.9 20.8 5.5 LOCK Key No. :3H to 6H 11.1 23 [3PDT] Illuminated Pushbutton Key Selector Switches with Disc Tumbler Key Panel Thickness: 0.5 to 3.2 mm 2.6 Pilot Light Gasket Locking Ring 1.2 Pushbutton 3.85 3.85 1 Selector 2-R0.6 Illuminated Selector 6.95 6.95 Solder/Tab Terminal Mounting Bracket Key Selector [SPDT/DPDT] Lever Switch 6 o2 8 8 8 Accessories [3PDT] LOCK Maintenance Parts Terminal Arrangement (Bottom View) Panel Cut-out 1 SPDT/DPDT Contacts 3PDT Contacts 6 1 5 TOP TOP TOP 5 6 15.8 17.8 Square 2.8W x 0.5t 0.8W x 0.5t 17.8 [SPDT/DPDT] 18.8 11.9 LOCK 20.8 Buzzer 8 1.95 1.95 Round 11.1 23 2 5.5 [PC Board Terminal] 22 7 27.9 24 21 [Solder/Tab Terminal] 2 18.1 12 22 12 32 22 12 14 24 14 34 24 14 21 11 31 21 11 26 11 (SPDT contacts on the right only) (SPDT contacts on the right only) * For details on mounting hole layout, see page 49. * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. [3PDT] 33 Instructions o16 LB Series Illuminated Pushbuttons Illuminated Pushbuttons Solder/Tab Terminal Part No. / Shape Package Quantity:1 LB L- 1T Round Operation Contact Square LED Operating Voltage SPDT Momentary Part No. Gold Contact Silver Contact LBL-M1T14* LBL-M1T54* LBL-M1T24* LBL-M1T64* LBL-A1T14* LBL-A1T54* LBL-A1T24* LBL-A1T64* 24V AC/DC DPDT SPDT Maintained * Illumination Color Code Specify the color code in place of * in the Part No. A: G: PW: R: S: W: Y: 24V AC/DC DPDT Rectangular with 3-sided Barrier Rectangular amber green pure white red blue white yellow * Illuminated pushbuttons contain an LED unit. For details on LED units, see page 60. * Illuminated pushbuttons can be used with legend markings. Engraving can be done on a marking plate which is placed in the lens, or a clear film can be printed and placed in the lens. See page 63 for details on the marking plate and film. * White lens type (when light is off) are available. Clear lens is used instead of colored lens for amber, green, red, and blue illuminated pushbuttons. Amber, green, red, or blue LED units are used. To specify, see Part Number Development below. * PC board terminals available for gold contacts. To specify, see Part Number Development below. * 5V DC and 12V AC/DC LED operating voltages also available. To specify, see Part Number Development below. Part Number Development LB L- 1 T Shape Code 1 2 3 4 Operation Shape Round Square Rectangular Rectangular with 3-sided Barrier Code Operation A Maintained M Momentary Contacts Code 1 2 5 6 LED Operating Voltage Contact Gold/SPDT Gold/DPDT Silver/SPDT Silver/DPDT Code 1 3 4 Rated Operating Voltage 5V DC 12V AC/DC 24V AC/DC Others Code Specification Blank Solder/Tab Terminal Part No. Example -- W White Lens Type (When Light is Off) LB1L-M1T14W* V PC Board Terminal (Gold Contact Only) LB1L-M1T14V* VW White Lens Type (When Light is Off) with PC Board Terminal (Gold Contact Only) LB1L-M1T14VW* * Specify the color code in place of * in the table above * Color code for white lens type: A (amber), G (green), R (red), and S (blue) only. 34 LB Series Illuminated Pushbuttons o16 Dimensions Flush Silhouette LB Series Flush Silhouette Gasket 2.6 1 o16 LB Series 8 o1 UP Series 3.85 3.85 Round 5.7 Locking Ring 1.2 LBW Series Panel Thickness: 0.5 to 3.2 mm 2-R0.6 6.95 6.95 Square Solder/Tab Terminal Mounting Ring 0.6 18 0.8W x 0.5t 2.8W x 0.5t 18 6 1 Rectangular 3 6 5 5 17.8 15.8 3 1 LOCK 17.8 2 5.5 [PC Board Terminal] 7 8.8 20.9 24 9 [Solder/Tab Terminal] All dimensions in mm. Panel Cut-out for Positioning Terminal Arrangement (Bottom View) (LB1L/LB2L/LB3L/LB4L) TOP 22 TOP 12 X1 24 14 X2 Lamp Terminal (-) 21 Lamp Terminal (+) Lamp Terminal (-) X1 o16.0 X2 +0.1 0 14.8 +_ 0.05 Lamp Terminal (+) 11 (SPDT contacts on the right only) 1.9 +_ 0.05 Illuminated Pushbutton Pilot Light Mounting Hole Layout Pushbutton (LB1L/LB2L/LB3L/LB4L) Selector o1 6. 2 +0 0 .2 Illuminated Selector 18 Key Selector Lever Switch 18 Buzzer Accessories *: 24 mm for rectangular units. Note: When using rubber boot or terminal cover, see dimensions on 56 and 58. Maintenance Parts * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. Panel Cut-out Instructions 35 o16 LB Series Pilot Lights Pilot Lights Solder/Tab Terminal Part No. / Shape Package Quantity:1 LB P - T0 Round Lens Shape LED Operating Voltage Square Rectangular Part No. Rectangular with 3-sided Barrier Dome * Illumination Color Code Specify the color code in place of * in the Part No. Flush 24V AC/DC LBP-1T04* Dome 24V AC/DC LB1P-2T04* A: G: PW: R: S: W: Y: amber green pure white red blue white yellow * Pilot lights contain an LED unit. For maintenance LED units see page 60. * Legends and symbols can be engraved on a marking plate or film to be inserted under the lens by users for labelling purposes. See page 63 for details. * White lens type (when light is off) are available. Clear lens is used instead of colored lens for amber, green, red, and blue pilot lights. Amber, green, red, or blue LED units are used. To specify, see Part Number Development below. * PC board terminals available. To specify, see Part Number Development below. * 5V DC and 12V AC/DC LED operating voltages also available. To specify, see Part Number Development below. Part Number Development LB P - T0 Shape Code 1 2 3 4 Lens Shape Shape Round Square Rectangular Rectangular with 3-sided Barrier Code 1 2 LED Operating Voltage Lens Shape Flush Dome Code 1 3 4 Rated Operating Voltage 5V DC 12V AC/DC 24V AC/DC * Round only for dome. Others Code Blank W V VW Specification Solder/Tab Terminal White Lens Type (When Light is Off) PC Board Terminal White Lens Type (When light is Off) with PC Board Terminal Part No. Example -- LB1P-1T04W* LB1P-1T04V* LB1P-1T04VW* * Specify the color code in place of * in the table above * Color code for white lens type: A (amber), G (green), R (red), and S (blue) only. 36 LB Series Pilot Lights o16 Dimensions Flush Silhouette LB Series Flush Silhouette Gasket 1 2.6 LBW Series Panel Thickness: 0.5 to 3.2 mm Locking Ring Round 5.7 o16 LB Series 8 o1 1.2 UP Series 2-R0.6 Square Solder/Tab Terminal Mounting Ring 0.6 18 18 3 3 Rectangular 3 3 15.8 17.8 2.8W x 0.5t 0.8W x 0.5t LOCK 2 17.8 8.8 7 5.5 [PC Board Terminal] 20.9 24 9 [Flush] [Solder/Tab Terminal] [Dome] 14.4 5.7 [Dome] All dimensions in mm. Terminal Arrangement (Bottom View) Illuminated Pushbutton Panel Cut-out for Positioning Pilot Light (LB1P/LB2P/LB3P/LB4P) Pushbutton Lamp Terminal (+) Lamp Terminal (-) X1 o16.0 +0.1 0 14.8 +_ 0.05 TOP Selector Illuminated Selector X2 Key Selector 1.9 +_ 0.05 Lever Switch Mounting Hole Layout Buzzer (LB1P/LB2P/LB3P/LB4P) Accessories o1 6. 2 Maintenance Parts +0 0 .2 Panel Cut-out 18 Instructions 18 *: 24 mm for rectangular units. Note: When using rubber boot or terminal cover, see dimensions on 56 and 58. * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. 37 o16 LB Series Pushbuttons Pushbuttons Solder/Tab Terminal Part No. / Shape Package Quantity:1 LB B - 1 T Square Round Button Style Operation Momentary Button Maintained Momentary Lens Maintained Contact Rectangular Rectangular with 3-sided Barrier Part No. Gold Contact Silver Contact SPDT LBB-M1T1* LBB-M1T5* DPDT LBB-M1T2* LBB-M1T6* 3PDT LBB-M1T3* LBB-M1T7* SPDT LBB-A1T1* LBB-A1T5* DPDT LBB-A1T2* LBB-A1T6* 3PDT LBB-A1T3* LBB-A1T7* SPDT LBB-M1T1L* LBB-M1T5L* DPDT LBB-M1T2L* LBB-M1T6L* 3PDT LBB-M1T3L* LBB-M1T7L* SPDT LBB-A1T1L* LBB-A1T5L* DPDT LBB-A1T2L* LBB-A1T6L* 3PDT LBB-A1T3L* LBB-A1T7L* * Illumination Color Code B: G: R: S: W: Y: black green red blue white yellow A: G: R: S: W: Y: amber green red blue white yellow * Lens can be used with legend markings. Engraving can be done on a marking plate which is placed in the lens, or a clear film can be printed and placed in the lens. See page 63 for details on the marking plate and film. * Black is available for lens. Black lens consists of a transparent lens and a black marking plate. To specify, see Part Number Development below. * PC board terminals available for gold contacts. To specify, see Part Number Development below. Part Number Development LB B- 1 T Shape Code 1 2 3 4 Shape Round Square Rectangular Rectangular with 3-sided Barrier Operation Code Operation A Maintained M Momentary Others Code Specification Blank Solder/Tab Terminal B Black Translucent Lens (Lens Only) V PC Board Terminal (Gold Contact Only) 38 Part No. Example -- LB1B-M1T1LB LB1B-M1T1V* Contacts Code 1 2 3 5 6 7 Contact Gold/SPDT Gold/DPDT Gold/3PDT Silver/SPDT Silver/DPDT Silver/3PDT LB Series Pushbuttons o16 Dimensions Flush Silhouette LB Series Flush Silhouette 2.6 1 Gasket o16 LB Series 5.7 UP Series 3.85 3.85 Locking Ring 1.2 LBW Series Panel Thickness: 0.5 to 3.2 mm 2-R0.6 Solder/Tab Terminal 6.95 6.95 Round Mounting Ring 8 o1 0.6 1.95 8 Square 8 8 8 1.95 [SPDT/DPDT] [3PDT] 18 0.8W x 0.5t [SPDT/DPDT] 1 Rectangular 18 6 2 17.8 2.8W x 0.5t 6 5 5 15.8 17.8 1 LOCK 8.8 5.5 7 [PC Board Terminal] 20.9 24 9 [Solder/Tab Terminal] 20.8 18.8 11.9 LOCK All dimensions in mm. Illuminated Pushbutton 11.1 23 Pilot Light [3PDT] Pushbutton Terminal Arrangement (Bottom View) SPDT/DPDT Contacts Selector Illuminated Selector (LB1B/LB2B/LB3B/LB4B) 3PDT Contacts TOP TOP Mounting Hole Layout o1 TOP6.0 TOP Key Selector +0 0 .2 12 22 12 32 22 12 32 22 12 24 14 24 14 34 24 14 34 24 14 21 11 21 11 31 21 11 31 21 18 2 22 Lever Switch Buzzer 11 Accessories PDT contacts on the right only)(SPDT contacts on the right only) 18 1 Panel Cut-out for Positioning o16.0 +0.1 0 *1: 24 mm for rectangular units, 23.2 mm for 3PDT *2: 21 mm for 3PDT Note: When using rubber boot or terminal cover, see dimensions on 56 and 58. Panel Cut-out Instructions 14.8 +_ 0.05 (LB1B/LB2B/LB3B/LB4B) Maintenance Parts 1.9 +_ 0.05 * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. 39 o16 LB Series Selector Switches Selector Switches Solder/Tab Terminal Part No. / Shape Package Quantity:1 LB S - T Knob Operator Lever Operator Round Square Rectangular Operator Position 90 2-position L Maintained L Spring return two-way R C R L C R Square Rectangular Part No. Contact Maintained 45 3-position Round Gold Contact Silver Contact SPDT LBS-2T1 LBS-2T5 DPDT LBS-2T2 LBS-2T6 3PDT LBS-2T3 LBS-2T7 DPDT LBS-3T2 LBS-3T6 3PDT LBS-3T3 LBS-3T7 DPDT LBS-33T2 LBS-33T6 3PDT LBS-33T3 LBS-33T7 * Lever operators also available. To specify, see Part Number Development below. * PC board terminals available for gold contacts. To specify, see Part Number Development below. * 2-position spring return from right, 3-position spring return from right, 3-position spring return from left also available. To specify, see Part Number Development below. * For contact operation, see page 48. Part Number Development LB S - T Shape Code Shape 1 Round 2 Square 3 Rectangular Operator Position 2-position L Operator Code Blank L 40 Operator Shape Knob Lever 3-position Operator Position 2 Maintained 21 Spring return from right R L R Contacts Code 1 2 3 5 6 7 Contact Gold/SPDT (90 2-position only) Gold/DPDT Gold/3PDT Silver/SPDT (90 2-position only) Silver/DPDT Silver/3PDT 3 Maintained L C R Operator Position 31 Spring 32 Spring return from return from right left L C R L C R 33 Spring return twoway L C R Others Code Specification Blank Solder/Tab Terminal PC Board Terminal V (Gold Contact Only) Part No. Example -- LB1S-2T1V LB Series Selector Switches o16 Dimensions Flush Silhouette LB Series Flush Silhouette LBW Series o16 LB Series Panel Thickness: 0.5 to 3.2 mm Gasket Locking Ring 1.2 UP Series 3.85 3.85 2.6 1 2-R0.6 6.95 Solder/Tab Terminal 6.95 Round Mounting Ring Round 8 o1 8 o1 0.6 1.95 1.95 [SPDT/DPDT] 8 8 8 8 Square Square [3PDT] 0.8W x 0.5t 18 1 10.9 6 8.8 5.5 18 18 5 5 2 17.8 [SPDT/DPDT] Rectangular 6 1 Rectangular 15.8 17.8 18 2.8W x 0.5t LOCK [PC Board Terminal] 7 20.9 8.7 24 24 15.5 [Knob Operator] [Knob Operator PC Board Terminal] [Lever Operator] LOCK Pilot Light 8.7 11.9 20.8 18.8 Illuminated Pushbutton Pushbutton 18.1 11.1 Selector [Lever Operator] 23 All dimensions in mm. Illuminated Selector [3PDT] Terminal Arrangement (Bottom View) Mounting Hole Layout SPDT/DPDT Contacts (LB1S/LB2S/LB3S) TOP TOP 12 22 12 24 14 24 14 34 21 11 21 11 31 22 32 6. 0 12 32 22 12 24 14 34 24 14 21 11 31 21 11 22 Buzzer o1 TOP TOP Lever Switch +0 0 .2 Accessories Maintenance Parts 18 2 3PDT Contacts Key Selector Panel Cut-out (SPDT contacts on the right only) (SPDT contacts on the right only) Panel Cut-out for Positioning o16.0 +0.1 0 *1: 24 mm for rectangular units, 23.2 mm for 3PDT *2: 21 mm for 3PDT Note: When using terminal cover, see dimensions on page 58. 14.8 +_ 0.05 (LB1S/LB2S/LB3S) Instructions 18 1 1.9 +_ 0.05 * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. 41 o16 LB Series Illuminated Selector Switches Illuminated Selector Switches Solder/Tab Terminal Package Quantity:1 Part No. / LB F- T Shape Round Operator Position Contact Square LED Operating Voltage Rectangular Part No. Gold Contact Silver Contact * Illumination Color Code Maintained SPDT 90 2-position 45 3-position * * * * L Maintained L 24V AC/DC LBF-2T14* LBF-2T54* Specify the color code in place of * in the Part No. R C R DPDT 24V AC/DC LBF-2T24* LBF-2T64* DPDT 24V AC/DC LBF-3T24* LBF-3T64* G: green R: red W: white Illuminated selector switches contain an LED unit. For maintenance LED units see page 60. PC board terminals available for gold contacts. To specify, see Part Number Development below. 5V DC and 12V AC/DC LED operating voltages also available. To specify, see Part Number Development below. For contact operation, see page 48. Part Number Development LB F- T Shape Code 1 2 3 Shape Round Square Rectangular Operator Position 2-position Code 1 3 4 42 Rated Operating Voltage 5V DC 12V AC/DC 24V AC/DC Code 1 2 5 6 Operator Position 2 Maintained 3 Maintained L LED Operating Voltage Contacts 3-position L R C R Contact Gold/SPDT (90 2-position only) Gold/DPDT Silver/SPDT (90 2-position only) Silver/DPDT Others Code Specification Blank Solder/Tab Terminal V PC Board Terminal (Gold Contact Only) * Specify a color code in place of * in the Part No. Part No. Example -- LB1F-2T14V* LB Series Illuminated Selector Switches o16 Dimensions Flush Silhouette LB Series Flush Silhouette LBW Series Panel Thickness: 0.5 to 3.2 mm 2.6 1 Round 3.85 3.85 6.95 1.2 2-R0.6 6.95 Gasket Locking Ring Solder/Tab Terminal o16 LB Series 18 o UP Series Square LOCK Mounting Ring 0.8W x 0.5t 0.6 2.8W x 0.5t 1 6 18 3 6 5 5 17.8 15.8 1 3 18 Rectangular 17.8 2 5.5 [PC Board Terminal] 9.6 7 20.9 17.5 24 [Solder/Tab Terminal] All dimensions in mm. Terminal Arrangement (Bottom View) 24 21 X1 X2 12 14 o16.0 +0.1 0 14.8 +_ 0.05 22 Lamp terminal (-) Round (LB1F/LB2F/LB3F) TOP Lamp terminal (+) Panel Cut-out for Positioning 11 (SPDT contacts on the right only) Illuminated Pushbutton 1.9 +_ 0.05 Pilot Light Pushbutton Mounting Hole Layout Selector Round (LB1F/LB2F/LB3F) Illuminated Selector o1 6. 2 Key Selector +0 0 .2 Lever Switch 18 Buzzer Accessories 18 Maintenance Parts *: 24 mm for rectangular units. Note: When using terminal cover, see dimensions on page 58. Panel Cut-out * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. Instructions 43 o16 LB Series Key Selector Switches Key Selector Switches Solder/Tab Terminal Part No. / Shape Package Quantity:1 LB K - T - Round Operator Position Square Key Removable Position 45 3-position * * * * * * * L Maintained R A: Key removable in all positions Maintained L C Part No. Contact A: Key removable in all positions 90 2-position Rectangular Gold Contact Silver Contact SPDT LBK-2ST1A LBK-2ST5A DPDT LBK-2ST2A LBK-2ST6A 3PDT LBK-2ST3A LBK-2ST7A DPDT LBK-3ST2A LBK-3ST6A 3PDT LBK-3ST3A LBK-3ST7A R For operator position, see Part Number Development below. For key removable position, see Part Number Development below. The key cannot be removed at the return position. Two keys are supplied. Besides the standard key (key number 0H), six other keys are available. Disc tumbler keys also available. Only the standard key is available. To specify, see Part Number Development below. PC board terminals available for gold contacts. To specify, see Part Number Development below. For contact operation, see page 48. Part Number Development LB K- T - Shape Code 1 2 3 2-position Shape Round Square Rectangular Key Removable Position A: Key removable B: Key removable C: Key removable in all positions at left at right L Operator Position Code 2 21 3 31 32 33 Operator Position 90 2-position maintained 90 2-position spring return from right 45 3-position maintained 45 3-position spring return from right 45 3-position spring return from left 45-3-position spring return two-way Key Style Code Key Style S Wave key Disc tumbler Blank key Contacts Code 1 2 3 5 6 7 44 Key Removal Position * Wave key only. Contact Gold/SPDT (90 2-position only) Gold/DPDT Gold/3PDT Silver/SPDT (90 2-position only) Silver/DPDT Silver/3PDT L R L L R R 3-position Key Removable Position A: Key removable in all positions L C L C B: Key removable at left / center L R E: Key removable at right / left Key Number Code Blank Standard key (0H) 1H to 2H Reversible key 3H to 6H Non-reversible key R Spring return from right C R L G:Key removable at left R L C C: Key removable at center / right C D: Key removable at center R L C R H: Key removable at right L R C R For key selectors with the following operations, the key cannot be removed at the return position. 3-position Spring return from right L C R Spring return from left L C R Spring return two-way L C R * Key is removable at L , C , R . Key is retained at L , C , and R . Others Code Specification Blank Solder/Tab Terminal PC Board Terminal V (Gold Contact Only) Part No. Example -- LB1K-2ST1VA LB Series Key Selector Switches o16 Dimensions Flush Silhouette LB Series Key Selector Switches with Wave Key Gasket 3.85 6.95 [SPDT/DPDT] Solder/Tab Terminal Mounting Ring UP Series 8 o1 0.6 1.95 8 8 8 8 1.95 Square 18 [3PDT] LOCK 1 14 6 18 6 1 5 5 15.8 Rectangular 2.8W x 0.5t 0.8W x 0.5t 17.8 o16 LB Series Round 6.95 1.2 2-R0.6 LBW Series Locking Ring 3.85 2.6 1 Flush Silhouette Panel Thickness: 0.5 to 3.2 mm 2 17.8 [SPDT/DPDT] LOCK 8.8 5.5 10.2 24 20.9 7 31.3 [Solder/Tab Terminal] Key No. :N/A to 2H 8.5 11.9 20.8 18.8 5.5 [PC Board Terminal] Key No. :3H to 6H 11.1 23 [3PDT] Key Selector Switches with Disc Tumbler Key Locking Ring Pilot Light 3.85 3.85 2.6 1 Illuminated Pushbutton Panel Thickness: 0.5 to 3.2 mm Gasket Round Pushbutton 8 o1 1.2 Selector Solder/Tab Terminal [SPDT/DPDT] Illuminated Selector Mounting Ring 6.95 6.95 2-R0.6 0.6 Key Selector 8 8 1.95 8 8 1.95 Square Lever Switch Buzzer Accessories 18 [3PDT] LOCK 1 Panel Cut-out 6 1 18 5 Instructions 6 5 17.8 15.8 2 17.8 5.5 [SPDT/DPDT] LOCK Maintenance Parts Rectangular 2.8W x 0.5t 0.8W x 0.5t 8.8 7 9 24 20.9 All dimensions in mm. 25.1 [Solder/Tab Terminal] [PC Board Terminal] Terminal Arrangement (Bottom View) 11.9 20.8 18.8 SPDT/DPDT Contacts 3PDT Contacts TOP TOP TOP TOP 22 12 22 12 32 22 12 24 11.1 14 24 14 34 24 14 21 11 31 21 11 21 23 11 [3PDT] (SPDT contacts on the right only) (SPDT contacts on the right only) 22 12 hole layout, see page 49. * For details32on mounting * For details on pc board and circuit design, see 34 24 14 page 50. * For details31on single board mounting, see page 21 11 51. 45 o16 LB Series Lever Switches Lever Switches Solder/Tab Terminal Package Quantity:1 Part No. / Shape Round Operator Position SPDT DPDT 3PDT Gold Contact LB1T-2T1 LB1T-2T2 LB1T-2T3 Silver Contact LB1T-2T5 LB1T-2T6 LB1T-2T7 DPDT LB1T-3T2 LB1T-3T6 D 3PDT LB1T-3T3 LB1T-3T7 U DPDT LB1T-33T2 LB1T-33T6 3PDT LB1T-33T3 LB1T-33T7 U Maintained 2-position D U Maintained 3-position Part No. Contact C Spring return from top/bottom C D * PC board terminals available for gold contacts. Add "V" to the Part No. Example: LB1T-2T1V * For contact operation, see page 48. Panel Thickness: 0.5 to 3.2 mm Dimensions All dimensions in mm. Gasket 1 Locking Ring 1.2 3.85 2.6 2-R0.6 Mounting Ring 6.95 Solder/Tab Terminal 1.95 8 8 8 8 1.95 [SPDT/DPDT] [3PDT] LOCK [SPDT/DPDT] LOCK 2.8W x 0.5t 8 6 1 o1 6 5 5 15.8 17.8 1 0.8W x 0.5t 17.8 0.6 2 10.8 7 5.5 20.9 24 [Solder/Tab Terminal] [PC Board Terminal] 18.8 SPDT/DPDT Contacts TOP 11.9 20.8 Terminal Arrangement (Bottom View) 11.1 23 [3PDT] 3PDT Contacts TOP TOP TOP 22 12 22 12 32 22 12 32 22 1 24 14 24 14 34 24 14 34 24 1 21 11 21 11 31 21 11 31 21 1 (SPDT contacts on the right only) (SPDT contacts on the right only) * For details on mounting hole layout, see page 49. * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. 46 LB Series Buzzers o16 Buzzers Flush Silhouette LB Series Flush Silhouette Specifications LBW Series Rated Insulation Voltage Rated Operating Voltage Operating Voltage Range Current Draw Inrush Current Sound Pressure (at 0.1m) Sound Frequency Response Speed Operating Temperature Storage Temperature Operating Humidity Insulation Resistance 30V 12, 24V DC 12V DC10%, 24V DC10% 26mA 80mA maximum Steady sound: 80 dB minimum (at the rated voltage) 2.30.3kHz 50 ms maximum -25 to +60C (no freezing) -30 to +80C(no freezing) 45 to 85% (no condensation) 100 M minimum (500V DC megger) Name and Shape Vibration Resistance Shock Resistance Life UP Series Degree of Protection LB3Z-1T0*: IP54 (IEC60529) LB3Z-104K: IP40 (IEC60529) Terminal Style LB3Z-1T0*: Solder/tab terminal #110 PC board terminal LB3Z-104K: Solder terminal Weight (approx.) 11g (LB3Z-1T0*), 8g (LB3Z-104K) * For applicable standards and UL, CSA ratings, see page 22. Operating Voltage Rectangular 24V DC IP54 o16 LB Series Between live and dead parts: 1,000V AC, 1 minute Operating extremes/Damage limits: 5 to 55 Hz, amplitude 0.5 mm Operating extremes: 100m/s2 Damage limits:1,000m/s2 1,000 hours minimum (beep sound) Dielectric Strength Part No. Terminal Style IP54 Solder/tab terminal LB3Z-1T04 -- PC board terminal LB3Z-1T04V -- -- Solder terminal IP40 IP40 LB3Z-104K * 12V DC operating voltages also available. Specify "-1T04" in place of "-1T03" in the Part No. Example: LB3Z-1T03 Gasket IP54 Terminal Arrangement (Bottom View) TOP Buzzer terminal (+) Buzzer terminal (-) Panel Thickness: 0.5 to 3.2 mm Locking Ring 2.6 1 1.2 Dimensions 2-R0.6 Illuminated Pushbutton Solder/Tab Terminal Mounting Ring X1 Pilot Light 0.6 Pushbutton X2 LOCK 0.8W x 0.5t 2.8W x 0.5t 17.8 3 3 15.8 17.8 3 3 Selector 17.8 2 5.5 Illuminated Selector Key Selector 8.8 7 20.9 23.8 Lever Switch 9 Buzzer IP40 Terminal Arrangement (Bottom View) [PC Board Terminal] [Solder/Tab Terminal] Accessories Gasket Panel Thickness: 0.5 to 3.2 mm Locking Ring Maintenance Parts Panel Cut-out TOP Buzzer terminal (+) Buzzer terminal (-) Instructions X1 X2 Mounting Ring 17.8 * For details on mounting hole layout, see page 49. * For details on pc board and circuit design, see page 50. * For details on single board mounting, see page 51. 0.6 .2 o1 14.6 9 23.8 All dimensions in mm. 47 LB/LBW Series Contact Operation Contact Operation Selector Switch / Illuminated Selector Switch / Key Selector Switch Operator Position & Contact Operation (Top View) Position Left Contact 14 Center Right 12 14 12 SPDT 11 L 90 2-position L R R 11 Left 14 12 Right 24 22 11 21 Left 14 12 Right 24 22 11 21 DPDT Maintained Spring return from right Left Center Right 14 12 24 22 34 32 Left Center Right 14 12 24 22 34 32 3PDT 11 L 45 3-position C R Maintained L C R L C R L C R 21 31 Left 14 12 Right 24 22 11 21 11 Left 14 12 Right 24 22 11 21 21 31 Left 14 12 Right 24 22 11 21 DPDT Spring return Spring return Spring return from right from left two-way Left Center Right 14 12 24 22 34 32 Left Center Right 14 12 24 22 34 32 Left Center Right 14 12 24 22 34 32 11 11 11 3PDT 21 31 21 31 21 31 Lever Switch Lever Position & Contact Operation (Top View) Position Contact Down 14 Center Up 14 12 12 SPDT 11 11 U 90 2-position Left 14 12 Right 24 22 Left 14 12 Right 24 22 11 21 11 21 DPDT D Maintained Left Center Right 14 12 24 22 34 32 Left Center Right 14 12 24 22 34 32 11 11 3PDT 45 3-position 48 U U C C D D Maintained Spring return two-way 21 31 21 31 Left 14 12 Right 24 22 Left 14 12 Right 24 22 Left 14 12 Right 24 22 11 21 11 21 11 21 DPDT Left Center Right 14 12 24 22 34 32 Left Center Right 14 12 24 22 34 32 Left Center Right 14 12 24 22 34 32 11 11 11 3PDT 21 31 21 31 21 31 LB/LBW Series Panel Cut-Out Mounting Hole Layout / PC Board Drilling Layout Flush Silhouette LB Series Flush Silhouette LB Series Flush Bezel LBW Series 8. 18.2 +0 0 .2 +0.2 0 22 2 22 2 2 22 1 LB Series Standard Bezel +0 0. .2 0 26 26 6.2 18 2 +0 .2 0 26 26 * 53 mm for switches with guard (LB1/LB2/LB3) o1 +0.2 +0.2 22.5 0.0 22.5 0.0 26 3 Square (LBW7/LBW7M/LBW7G) 26 2. 26 2 +0 0. .2 0 26 2 3 o2 UP Series Note: When using the LB series with a rubber boot or terminal cover, make sure to note the dimensions on page 56. Round (LBW6/LB6M/LBW6G) 2. +0.2 0 28 LBW Series Flush Bezel o2 24.2 22 1 *1: 23.2 mm for 3PDT contacts *2: 45 mm for switches with guard o16 LB Series Rectangular (LB8/LB8M) 22 2 o1 Square (LB7/LB7M) 18.2 +0.2 0 Round (LB6/LB6M) *1: 24 mm for rectangular type 23.2 mm for 3PDT contacts *2: 21 mm for 3PDT contacts 18 1 * 53 mm for switches with guard Panel Cut-out for Positioning 4- R0 .5 or LBW Series Flush Bezel Round (LBW6/LBW6M/LBW6G) o2 2.3 les .2 0.1 1.9 0 -0.1 o16.0 +0.1 0 .2 0 17.10.05 o18 +0 21.6 +0.10 s LB Series Standard Bezel Round (LB1/LB2/LB3) 14.8 +_ 0.05 LB Series Flush Bezel Round (LB6/LB6M) Illuminated Pushbutton Pilot Light 1.9 +_ 0.05 Pushbutton 1.9 0.05 Selector Approval Ratings and CCC Approval File No. UL TUV Gold Contact Gold Contact Rated Operating Voltage Rated Operating Current 30V DC 0.1A 125V AC 0.1A 30V -- -- 2, 3, 5A 1A 125V 3.5 A 2A 0.4A 0.2A 250V 2, 3, 5A 1.5A -- -- 125V AC 0.1A (AC-12) Rated Operating Voltage Rated Operating Current AC-12 DC-12 30V -- 2, 5A 125V 3A 0.4A 250V 2, 5A -- CCC Lever Switch 30V DC 0.1A 125V DC 0.1A Rated Operating Voltage Rated Operating Current 30V DC 0.1A (DC-12) 30V -- -- 2, 5A 1A 125V 3A 2A 0.4A 0.2A 250V 2, 3, 5A 1.5A -- -- 125V AC 0.1A (AC-12) Silver Contact Rated Operating Voltage Silver Contact Rated Operating Current Accessories Maintenance Parts Panel Cut-out Instructions Gold Contact Gold Contact Rated Operating Voltage Res. AC Rated Ind. Operating Res. Current DC Ind. 30V DC 0.1A (DC-12) Silver Contact CSA Rated Operating Voltage Rated Operating Current Key Selector Buzzer Silver Contact Rated Operating Voltage Res. AC Rated Ind. Operating Res. Current DC Ind. Rated Operating Voltage Rated Operating Current Illuminated Selector AC-12 DC-12 30V -- 2, 5A 250V 2, 5A -- 49 LB/LBW Series Notes for Designing PC Board and Circuit Notes for Designing PC Board and Circuit **Use 1.6-mm-thick glass epoxy PC board with drilled holes. **Design a circuit so that the LB/LBW series can operate within the rated voltage and current range. Make sure that inrush current and voltage do not exceed the rating. **Minimum applicable load is 5V AC/DC, 1 mA on gold contacts. Applicable range is subject to the operating condition and load. **Since the *2.8-mm-wide terminal touches the PC board as shown on the right, short circuit may occur with pattern lines. Design a circuit that prevents short circuits. SPDT/DPDT Contacts 5 *2.8 *2.8 *2.8 2.4 2.4 2.4 5 *2.8 5 *2.8 Mounting Switch terminal Side *2.8 *2.8 *2.8 *2.8 *2.8 NC Terminal NO Terminal NC Terminal COM Terminal NO Terminal *2.8 1.6 (PC Board) 2.4 5 COM Terminal Mounting Side Soldered Side 2.4 (0.8) SW Terminal SW Terminal (0.8) SW Terminal SW Terminal SW Terminal o1 SW Terminal 9- o1 .2 9- +0 0 .1 .2 +0 0 .1 5 (0.8) (0.8) *2.8 2.4 (0.5) (0.5) (0.5) Mounting Side 1.6 (PC Board) (0.5) 5 8 1.6 (PC Board) Soldered Side Soldered Side Lamp terminal 5 (0.5) (0.5) 8 *2.8 Mounting Side (0.8) (0.8) 3PDT Contacts 8 Mounting Side 2.4 Soldered Side 2.4 9- 8 *2.8 *2.8 Soldered Side 6.0 COM Terminal 6.0 NO Terminal NC Terminal COM Terminal NO Terminal SW Terminal SPDT (0.8) o1 .2 +0 0 .1 SW Terminal DPDT (0.8) Lamp Terminal SW Terminal SW Terminal SPDT DPDT Lamp Terminal (0.8) 4.0 (0.8) 9- +0 0 .1 .2 NC Terminal (0.8) o1 1.6 (PC Board) 5 (0.8) (0.8) 6.95 (0.5) Lamp Terminal (+) Lamp Terminal (-) Lamp Terminal (+) Lamp Terminal (-) 1.6 (PC Board) 1.6 (PC Board) *2.8 6.95 (0.5) (0.8) (0.8) 4.0 3.85 (0.8) (0.5) (0.5) (0.5) (0.5) 3.85 Mounting Side Soldered Side PC Board Drilling Layout (Bottom View) 3PDT Contacts 2 . o1 8- le r ho d ng ve ir lle rati g le ) d pe in e 3 o6 o ck ot 0.5 for e lo (N th (N e ot 5 9.3 9- o1 .2 (N ot e 1.45 2) le ho r ed g rill ratin leve d o6 ope king te 3) r c o fo e lo (N th 5 SPDT/DPDT Contacts 6.95 1 (Note 1) 1 ( Note 1) 5 5 10 2) 3.85 1.95 (Note 1) 8 8 Note 1: When designing, note the alignment of center lines of the contact blocks and center lines of the operators. Note 2: The diameter of the terminal hole is o1.2. Note 3: Hole diameter may vary to meet installation requirements. Determine the location and the size of the hole so that the locking lever can be operated. All dimensions in mm. 50 LB/LBW Series Single Board Mounting Single Board Mounting Flush Silhouette LB Series 18 .2 Rear o1 Turn the locking lever to install and remove contact blocks on the PC using a screwdriver from a hole in the PC board. See "Notes for Designing PC Board and Circuit" on page 50. Determine the location of the switches so that the locking lever can be operated. See "Removing and Installing the Contact Block" on page 61. UP Series 8. .1 2 0 .1 23.2 min 22 min LB7/LB7M/LB7G 18.2 0.1 18.2 0.1 22 min Installing and Removing Contact Blocks o16 LB Series 3PDT Contacts 0 22 min Front SPDT/DPDT Contacts LB6/LB6M/LB6G o LBW Series 22 min o6 drilled hole for operating the locking lever Flush Silhouette LB Series Flush Bezel 22 min IDEC's LB/LBW Series is available for single board mounting. Mounting Holes and Assembly Procedure Drill mounting holes in the panel as shown below. When the units are mounted collectively, provide adequate clearance. .5 or les s o18 1.9 +_ 0.05 LBW Series Flush Bezel (LBW6/LBW6M/LBW6G) o2 +0 1.9 18.2 0.1 28 min Illuminated Pushbutton 28 min 1.9 0.05 Pilot Light * 45 mm minimum for switches with guard Pushbutton 0 -0.1 .2 0 Selector LBW Series Flush Bezel 21.6 +0.10 2.3 18.2 0.1 17.10.05 .2 0.1 24.2 0.1 22 min R0 24.2 0.1 22 min +0.1 0 LB Series Flush Bezel (LB6/LB6M/LB6G) 4- 14.8 +_ 0.05 o16.0 23.2 min LB8/LB8M/LB8G Panel Cut-out for Positioning Standard Bezel (LB1/LB2/LB3/LB4) 22 min LBW6/LBW6M/LBW6G LBW Series Flush Bezela LBW7/LBW7M/LBW7G o2 o2 2. 2+. 3 03. Key Selector +0.2 +0.2 0.0 22.522.5 0.0 +0 0. 2 0. .2 0 0 Mounting Hole Layout Illuminated Selector Lever Switch Standard Bezel (LB1/LB2/LB3/LB4) Accessories .1 +0 0 0 6. 0 +0. Buzzer 26 min. 26 min. 6. o1 o1 3PDT Contacts 26 min. 26 min. SPDT/DPDT Contacts 0 1 21 or more 18 or more 26 min. 26 min. 18 or more (24 or more for rectangular units) Maintenance Parts 26 min. 26 min. Panel Cut-out * 53 mm minimum for switches with guard 23.2 or more (24 or more for rectangular units) Instructions Assembly Procedure 1. Install the operator to the panel. 2. Mount the contact block to the operator from the rear. 3. Turn the locking lever to lock the contact block. 4. Insert the PC board to terminals and solder. Note 1: Make sure that each terminal is inserted into the PC board correctly. Note 2: Do not apply tensile force to the connector cable for an extended period of time. Note 3: Do not expose the contact block to water. Note 4: Ensure to lock contact blocks when the contact blocks are installed on the operators. UP series can be installed on the same board. For details, see page 52. 51 UP Series Single Board Mount Pilot Lights Mounts on the same panel as LB/LBW series **Three illumination colors: Green (G), red (R), and white (W) Specifications Color Code Rated Current (I) Reverse Voltage (VR) Maximum Operating Current Temperature (Topr) (Ta: 25C) Storage Temperature (Tstg) Red (R), White (W) 7mA G (Green) 2mA 9V 5V -25 to +55C (no freezing) -30 to +80C (no freezing) Standard value: Standard value: 2V (If=7mA) 2.7V (If=2 mA) Between live and dead parts: 500V AC, 1 minute 4.3g (UP8-89V1), 5.1g (UP8-89V2) Forward Voltage (Vf) Dielectric Voltage Weight (approx.) UP Series Mounting Hole Size Shape Degree of Protection (IEC 60529) o8 With standard bezel UP8 Mountable Unit Standard Bezel Shroud With flush bezel Shroud Ordering No. UP8-89V1* UP8-89V1*PN10 Illumination Color Code Specify the color code in place of * in the Part No. IP40 UP8-89V2* Flush Bezel o9 UP9P Part No. Standard bezel Flush bezel IP65 UP8-89V2*PN10 Package Quantity 10 G: green R: red W: white UP9P-99V1* UP9P-99V1*PN10 10 * LED cannot be replaced. Note: Connect an external current limiting resistor in series. Otherwise, the LED may be damaged. Dimensions LED Kit Panel Thickness 0.6 to 4 o8.1 M8xP0.75 + Marking Body o10 o7 o5 9.6 1.5 3 9 10.8 Panel Thickness 0.6 to 6 Panel o8.1 o10 Body o7 PC Board (t=1.6) 11.5 5 M8xP0.75 [Assembly Drawing] UP8-89V1 + Terminal UP8-89V2 12 Panel Thickness 0.6 to 4 Dimensions (L ) Standard Bezel 22.5mm 9 Flush Bezel 29.9mm 11.8 .8 o0 Panel Cut-out UP8 UP9P-99V1 5 Internal Circuit UP9P 0.1 0.1 .1 8.1 o o8 2.54 12.7 o8 L o9 Body o11 (2.54) M9xP0.75 PC Board Mounting Hole 11.5 5 20.8 0.1 0.1 .1 9.1 o o9 (+) (-) The longer pin is the positive terminal All dimensions in mm. 52 UP Series Single Board Mount Pilot Lights Safety Precautions Instructions **Turn off power to the unit before installation, removal, wiring, maintenance, and inspection. Failure to turn off may cause electrical shocks or fire hazard. **For wiring, use wires of a proper size to meet the voltage and current requirements. **Improper soldering or failure to tighten the terminal screw may cause overheating and fire. Flush Silhouette LB Series Flush Silhouette Polarity LBW Series Pay attention to the polarity of the power supply as UP series units do not contain a diode for protection against reverse polarity. The long terminal is positive and the short terminal is negative. Current Limiting Resistor Current Limiting Resistor (R) + Single Board Mounting Operating Voltage (V) - UP series miniature pilot light single board mounting types can be mounted with LB/ LBW series on the same panel. Follow the instructions below on UP Unit LED Kit single board mounting. Temporary mounting A Insert terminal Bend terminal 1. Note the polarity of the terminals and insert the terminals to the PC board. 2. Make sure that part A of the LED kit is pressed tightly to the PC board. Bend the terminals sideways as shown on the left. 2. Mount the operator and the UP series pilot lights on to the control panel. UP Unit Resistance ()= Operating Voltage (V) - Forward Voltage (Vf) Rated Current (I) * * Rated Current (I) = R (red), W (white) : 0.007A G (green) : 0.002A Forward Voltage (Vf) = R (red), W (white) : 2V G (green) : 2.7V Note: Use a resistor of higher resistance than the calculated value () 1. Mount the LED kit to the PC board. 45 minimum UP Series When using a UP series unit without a built-in current limiting resistor, connect an external current limiting resistor. Calculate the resistance using the following formula. LED PC Board (t=1.6mm) o16 LB Series Operator Rated Wattage = Rated Current x Operating x 2 to 3 * of Resistor (W) (I) Voltage (V) * 2 to 3 is a safety factor <Current Limiting Resistor Reference Value> Operating Voltage Color Red (R), White (W) Green (G) 5V DC 430 (1/4W) 1200 (1/4W) 6V DC 560 (1/4W) 1600 (1/4W) 12V DC 1500 (1/4W) 4700(1/4W) 24V DC 3000 (1/2W) 11000(1/4W) Panel Countermeasures against Dim Lighting 3. Mount the contact block to the operator of the miniature control unit and lock the unit by turning the locking lever. Illuminated Pushbutton See page 66. Pilot Light Wiring Locking Lever Contact Block 4. Install the PC board in 1. to the panel in 3. Notes on Panel Mounting Note: Make sure that the LED kit is inserted into the UP series unit. * When mounting LB/LBW and UP series on a single board, make sure that the distance between the front of the panel and the mounting side of the PC board (gasket distortion is taken into consideration) is as shown in the table below. Part No. UP8-89V1* UP8-89V2* UP9P-99V1* Mountable Unit Standard bezel Flush bezel Standard bezel Flush bezel Solder the terminal at 350C within 3 seconds using a 60W soldering iron. SnAgCu type lead-free solder is recommended. When soldering, do not touch the pilot light housing with the terminal. Do not bend the terminal or apply excessive force to the terminal. Pushbutton Selector Illuminated Selector Key Selector Tightening torque should not exceed 0.49 N*m. Do not use pliers. Do not tighten with excessive force, otherwise the locking ring will be damaged. Lever Switch Buzzer PC Board and Circuit Design Accessories Use glass epoxy copper clad laminate, double-sided through-hole PC boards with a thickness of 1.6 mm. Maintenance Parts Panel Cut-out Instructions Distance (*) 22.5mm 29.9mm 22.5mm 29.9mm 5. Solder the terminals. Before soldering, make sure that each terminal of the contact block is securely inserted into the PC board holes. Example of single board mounting 53 LB/LBW Series Accessories Accessories Package Quantity:1 Shape Specification Part No. Ordering No. Package Quantity Remarks Locking Ring Wrench o18.0 60.0 Metal (Nickel-plated brass) MT-001 MT-001 1 Used to tighten the locking ring when installing the units on to the panel. Stainless Steel MT-101 MT-101 1 Used to remove the lens or button. (for standard bezels) AL-K6SP AL-K6SP 1 Lens Removal Tool 60.0 Switch Guard (spring return) 180 Spring return For round / square units (LB1/LB2) Spring return 180 Spring return for Single Board Mounting Spring return For rectangular units (LB3/LB4) For rectangular units (LB3/LB4) Guard (Polyacetal) Base (Polyarylate) Guard (Polyacetal) Base (Polyarylate) AL-KH6SP AL-KH6SP LA9Z-K3 LA9Z-K3 1 1 Degree of protection: IP65 With the gasket mounted on the switch, attach the switch guard and mount on the panel. See page 56 for dimensions. 1 Degree of protection: IP40 Used to protect pushbuttons and illuminated pushbuttons from inadvertent operation. See page 56 for dimensions. With the gasket mounted on the switch, attach the switch guard and mount on the panel. See page 56 for dimensions. When using for single board mounting, remove the rubber gasket from the switch. Degree of protection: IP65 With the gasket mounted on the switch, attach the switch guard and mount on the panel. See page 56 for dimensions. Switch guard (remains open) Rubber Boot Guard (Polyacetal) LB9Z-K2 LB9Z-K2 0 Base (Polyarylate) 11 For Standard Bezels Remains 110/180 open (Can be used for single board mounting) For round / square units (LB1/LB2) 0 18 For rectangular units (LB3/LB4) LB9Z-K3P LB9Z-K3P 1 1. For round units (LB1) LB9Z-D1 LB9Z-D1 1 2. For square units (LB2) Rubber (Transparent LB9Z-D2 silicon rubber) LB9Z-D2 1 3. For rectangular units (LB3/LB4) LB9Z-D3 LB9Z-D3 1 Metal [Plug] Metal (Zinc diecast) [Locking nut] Polyacetal [Gasket] Nitrile rubber AL-BM6 AL-BM6 1 Rubber Nitrile rubber (black) AL-B6 AL-B6PN05 5 Mounting Hole Plug Degree of protection: IP65 Used to protect pushbuttons and illuminated pushbuttons from inadvertent operation. See page 56 for dimensions. With the gasket mounted on the switch, attach the switch guard and mount on the panel. Degree of protection: IP65 See page 56 for dimensions. See page 65 for mounting. Degree of protection: IP65 Tightening torque: 0.1 to 0.29 N*m See page 56 for dimensions. Mounting Hole Plug 54 Degree of protection: IP65 See page 56 for dimensions. LB/LBW Series Accessories Accessories Flush Silhouette LB Series Package Quantity:1 Shape Rubber Boot For LB Series Flush Bezels Mounting Hole Plug Mounting Hole Plug For LBW Series Flush Bezels Specification Part No. Ordering No. Package Quantity LB9Z-D6 LB9Z-D6 1 2. For square Rubber units (Transparent (LB7/LB7M) silicon rubber) LB9Z-D7 LB9Z-D7 1 3. For rectangular units (LB8/LB8M) LB9Z-D8 LB9Z-D8 1 LB9Z-BS6* LB9Z-BS6* 1 1. For round units [Plug] (LB6/LB6M) Polyamide (Black) 2. For square units [Gasket] (LB7/LB7M) Nitrile rubber LB9Z-BS7* LB9Z-BS7* 1 3. For [Mounting Plate] rectangular Stainless Steel units (LB8/LB8M) LB9Z-BS8* LB9Z-BS8* 1 1. For round units (LBW6/ LB6W6M) LBW9Z-BS6* LBW9Z-BS6* 1 LBW9Z-BS7* LBW9Z-BS7* 1 Mounting Hole Plug Metal o16 LB Series Remarks [Plug] Polyamide (Black) [Gasket] Nitrile rubber [Mounting Plate] Stainless Steel Degree of protection: IP65 See page 57 for dimensions. See page 65 for mounting. * Color code: blank (black), W (white) Degree of protection: IP65 Panel thickness: 0.5 to 3.2 mm See page 57 for dimensions. * Color code: blank (black), W (white) Degree of protection: IP65 Panel thickness: 0.5 to 3.2 mm See page 58 for dimensions. Illuminated Pushbutton Pilot Light [Plug] Zinc diecast [Locking Ring] Polyamide [Gasket] Nitrile rubber LW9Z-BM Nitrile rubber LW9Z-BP1 LW9Z-BM 1 Degree of protection: IP66 Tightening torque: 1.2 N*m See page 58 for dimensions. Pushbutton Selector Illuminated Selector Mounting Hole Plug Rubber LBW Series UP Series 1. For round units (LB6/LB6M) 2. For rectangular units (LBW7/ LB6W7M) Flush Silhouette LW9Z-BP1 1 Degree of protection: IP65 Tightening torque: 2.0 N*m See page 58 for dimensions. Key Selector Lever Switch Buzzer Terminal Cover 1. For SPDT/ DPDT contacts 2. For 3PDT contacts LB9Z-VL2 LB9Z-VL2PN10 See page 58 for dimensions. See page 61 for mounting. LB9Z-VL3 LB9Z-VL3PN10 10 Key Reversible key For key selector switches (wave key) Metal (zinc nickel-plated) LA9Z-SK-* LA9Z-SK-*PN02 2 AS6-SK-132 AS6-SK-132PN02 2 Non-reversible key Keys For key selector Metal (brass switches nickel-plated) (disc tumbler key) 18x1.8x25.1 t1.8 Accessories 10 PBT (White) Maintenance Parts Panel Cut-out Specify a key number in place of * in the Part No. Blank: Standard key 0H (reversible) 1H to 2H: Reversible key 3H to 6H: Non-reversible key See page 58 for dimensions. 55 Instructions LB/LBW Series Accessories Dimensions for Accessories For LB Series Standard Bezel All dimensions in mm. Rubber Boot or round units F (LB9Z-D1) For square units (LB9Z-D2) 20 26 11.5 11.5 20 o2 0 11.5 For rectangular units (LB9Z-D3) Mounting Hole Plug AL-BM6 o1 6. 2 o1 6. 2 6 Mounting Hole Layout 12 +0 0 .2 2.5 o17.8 o18 o16.5 2 Mounting Hole Layout +0 0 .2 AL-B6 Gasket Locking Ring Panel Thickness: 0.5 to 6 mm Switch Guard (Spring Return) Panel Thickness 0.5 to 2 Rubber Gasket 13 33 11 Waterproof Gasket for Switch Guard 0.4 24 2 R2 Waterproof Gasket for Switch Guard 13.5 0.4 13 18 2 R2 23.5 Rubber Gasket 34 23.5 34 11 Panel Thickness 0.5 to 2 For rectangular units (AL-KH6SP ) 33 For round / square units (AL-K6SP) 13.5 For Single Board Mounting (LA9Z-K3) (Note) Panel Thickness 0.5 to 3.2 32.6 2 24 Note: The panel depth is the same for switches with or without switch guards. Both types can be installed on the same PC board. 23.5 13 11 33 R2 12.4 Switch Guard (Remains Open) For round / square units (Note) (LB9Z-K2) Panel Thickness 0.5 to 3.2 32.7 32.7 18 56 12.4 23.5 11 18 0 0 23.5 13 11 11 18 0 0 12.4 13 32.9 24 32.9 Rubber Gasket 11 Panel Thickness 0.5 to 2.8 (When rubber gasket of switch is removed: 0.5 to 3.2) For rectangular units (Note) (LB9Z-K3P) LB/LBW Series Accessories Dimensions for Accessories Flush Silhouette LB Series Flush Silhouette LBW Series For LB Series Flush Bezel o16 LB Series Rubber Boot UP Series For round units (LB9Z-D6) or square units F (LB9Z-D7) or rectangular units F (LB9Z-D8) 24 30 4 4 4 24 4 o2 Mounting Hole Plug or round units F (LB9Z-BS6*) 2 or rectangular units F (LB9Z-BS8*) 22 22 o2 or square units F (LB9Z-BS7*) 18.1 28 o1 8.2 Mounting Hole Layout 18.2 +0.2 0 Mounting Hole Layout +0.2 0 24.2 +0.2 0 .2 +00 2 18.2 Mounting Hole Layout Panel Thickness: 0.5 to 3.2 mm Gasket Mounting Plate Locking Ring Illuminated Pushbutton Pilot Light Pushbutton Selector Illuminated Selector Key Selector Lever Switch Buzzer Accessories Maintenance Parts Panel Cut-out Instructions 57 LB/LBW Series Accessories Dimensions for Accessories For LB Series Flush Bezel Mounting Hole Plug Rubber (LW9Z-BP1) Mounting Hole Layout 3 12 3 .2 +0 0 12 .2 +0 0 2.3 M12P:1M12P:1 o29.0 o25.8 o25.8 o2 Gasket Gasket LockingLocking Ring Ring 2.0 or round units F (LBW9Z-BS6*) Rubber Gasket Rubber Gasket Locking Locking Ring Ring Thickness PanelPanel Thickness 0.8 to0.8 6 to 6 2.3 o2 Mounting Hole Layout o2 2.3 6 o2 +0.2 22.5 022.5 0 Locking Locking Ring Ring .2 +0 0 2.3 o2 26 o2 Panel Thickness: Panel Thickness: mm to 3.2 mm Gasket Gasket 0.5 to 3.20.5 Mounting Plate Mounting Plate 26 6 o2 o2 Mounting Hole Layout +0.2 .2 +0 0 .2 +0 0 2.3 0.5 0.5 15.0 15.0 2.0 For square units (LBW9Z-BS7*) Mounting Hole Layout .2 +0 0 2.3 o29.0 Metal (LW9Z-BM) 18.1 18.12 2 Terminal Cover For SPDT/DPDT contacts (LB9Z-VL2) 29.9 For 3PDT contacts (LB9Z-VL3) 29.9 TOP 22TOP 14 20.6 17.6 8.8 Logo Side 4.4 2.2 12.5 24.8 Key No. 0 H 19.6 12.5 Key No. Side Key (Wave Key) Reversible key 8.8 22 22 6.3 14 14 8.8 Non-reversible key Logo Side 0 H 3 H Key No. Side Key No. Side 6.3 Logo Side 3 H 58 Key No. All dimensions in mm. 22 14 8.8 Logo Side Key No. Key No. LB/LBW Series Accessories Accessories Flush Silhouette LB Series Flush Silhouette Material / Dimensions (WxHxD) Shape Lens Buttons LB Series Marking plate AL6M-L*PN05 5 2. For square units Polyarylate 15.4 H4 AL6Q-L* AL6Q-L*PN05 5 3. For rectangular Polyarylate units W21.4 H4 D15.4 AL6H-L* AL6H-L*PN05 5 Polyarylate 4. F or dome units o16 H9.4 AL6D-L* AL6D-L*PN05 5 Polyarylate 1. For round units o15.4 H4 AB6M-B* AB6M-B*PN05 5 2. For square units Polyarylate 15.4 H4 AB6Q-B* AB6Q-B*PN05 5 3. For rectangular units Polyarylate W21.4 H4 D15.4 AB6H-B* AB6H-B*PN05 5 1. For round units Acrylic o13.7 H0.8 AL6M-* AL6M-*PN05 5 2. For square units Acrylic 13.7 H0.8 AL6Q-* AL6Q-*PN05 5 Specify the color code in place of * in the part no. B: Black, W: White AL6H-* AL6H-*PN05 5 See page 63 for dimensions and engraving area. White For dome units Acrylic o13.6 H2.8 AL6D-W AL6D-WPN05 5 Standard bezel Metal (Stainless steel) 17.9 t0.6 LB9Z-LP1 LB9Z-LP1PN10 10 Flush bezel Metal (Stainless steel) 21x8.2x20.6 t0.8 LB9Z-LP6 LB9Z-LP6PN10 10 1. For round flush Polyarylate units o20 H4 HA9Z-L11* HA9Z-L11*PN05 5 2. For square flush units HA9Z-L21* HA9Z-L21*PN05 5 Anti-rotation Ring LBW Series Buttons Marking plate Polyarylate o20 H4 3. For round Polyarylate extended units o20.2 H7.8 LBW9Z-L12* LBW9Z-L12*PN05 5 1. For round flush Polyacetal units o20 H3.2 (L5) HA9Z-B11* HA9Z-B11*PN05 5 2. For square flush units HA9Z-B21* HA9Z-B21*PN05 5 3. For round Polyacetal extended units o19.8 H7.3 (L9.1) HA9Z-B12* HA9Z-B12*PN05 5 4. For square Polyacetal extended units o19.8 H8 (L9.1) HA9Z-B22* HA9Z-B22*PN05 5 1. For round flush Acrylic units o17 t0.85 (L1.1) HA9Z-P1* HA9Z-P1*PN05 5 2. For square units Acrylic 18.4 t0.85 HA9Z-P2* HA9Z-P2*PN05 5 LBW series Metal (Stainless steel) 25x8.2x24.8 t0.8 LBW9Z-LP6 LBW9Z-LP6PN10 10 All models Polyamide o17.9 H3.9 LB9Z-LN 10 Anti-rotation Ring Locking ring Illuminated selector knob operator o16 LB Series Remarks AL6M-L* Anti-rotation Ring Ordering No. Polyarylate o15.4 H4 Diffusion plate Part No. 1. For round units Acrylic 3. F or rectangular W19.7 H0.8 (0.4) units D13.7 Lens LBW Series Package Quantity Polyacetal o20 H3.9 (L5) <For operator> Polyarylate Illuminated Waterproof O-gasket LA1A-F* selector switches Nitryl rubber o15.4 H13 LB9Z-LNPN10 LA1A-F*PN02 UP Series Specify the color code in place of * in the part no. A: Amber, C: Clear, G: Green, R: Red, S: Blue, Y: Yellow Note: Use a clear lens for white (W) or pure white (PW) illumination. Specify the color code in place of * in the part no. B: Black, G: Green, R: Red, S: Blue W: White, Y: Yellow Specify the color code in place of * in the part no. A: Amber, C: Clear, G: Green, R: Red, S: Blue, Y: Yellow Note: Use a clear lens for white (W) or pure white (PW) illumination. Specify the color code in place of * in the part no. A: Amber, G: Green, R: Red, S: Blue, W: clear, Y: Yellow Note: Use a clear lens for white (W) or pure white (PW) illumination. Illuminated Pushbutton Pilot Light Pushbutton Selector Illuminated Selector Key Selector Lever Switch Specify the color code in place of * in the part no. B: Black, G: Green, R: Red, S: Blue W: White, Y: Yellow Buzzer Accessories Maintenance Parts Specify the color code in place of * in the part no. B: Black, W: White See page 64 for dimensions and engraving area. Specify the color code in place of * in the part no. G: green, R: red, W: white 59 Panel Cut-out Instructions LB/LBW Series Maintenance Parts Maintenance Parts LB Series Maintenance LED Unit Rated Operating Voltage Shape LED Unit Package Quantity: 1 Part No. (Ordering No.) 5V DC LB9Z-LED5* 12V AC/DC LB9Z-LED1* 24V AC/DC LB9Z-LED2* * Color Code A: Amber G: Green PW: Pure White R: Red S: Blue W: White * All LB/LBW series contain an LED unit. * Use a pure white (PW) LED unit for yellow (Y) illumination. Transformer Package Quantity: 1 Transformer For 24V Primary Voltage Part No. (Ordering No.) Secondary Voltage AC100/110V 100/110V AC 10% TWR512 AC200/220V 200/220V AC 10% TWR522 AC400/440V 400/440V AC10% TWR542 Applicable Load LB9Z-LED2 (24V AC/DC LED unit) * Terminal cover (TWR-VL3) is supplied as standard. * Connect one LB9Z-LED2 to a transformer. Shock Resistance Dielectric Strength Terminal Screw Applicable Wire Weight (approx.) All dimensions in mm. 2-o3.3 Mounting Hole 2 22 30 PRI. Primary Side 1 4 SEC. Secondary Side JAPAN M3.5 Terminal Screw 40 48 52 Terminal Cover 40 41 45.5 Vibration Resistance Dimensions TWR52 100/110V AC, 200/220V AC, 400/440V AC (50/60Hz) 2.4VA 600V 100 M minimum (500V DC megger) -30 to +60C (no freezing) -40 to +80C (no freezing) 35 to 85% RH (no condensation) Damage Limits: 30 Hz, amplitude 1.5 mm Operating extremes: 5 to 55 Hz, amplitude 0.5 mm Damage limits: 1,000 m/s2 Operating Extremes: 100 m/s2 2,500V AC, 1 minute M3.5 2 mm2 maximum, 2 wires maximum 87g 3 Part No. Operating Voltage Current Draw Rated Insulation Voltage Insulation Resistance Operating Temperature Storage Temperature Operating Humidity 5 Specifications BAA1000 Accessories 35mm DIN Rail Part No. Ordering No. Length Material Package Quantity BAA1000 BAA1000PN10 1,000mm Aluminum (approx. 200g) 10 BAP1000 BAP1000PN10 1,000mm Steel (approx. 320g) 10 Package Quantity Dimensions Part No. BNL6 Ordering No. BNL6PN10 Applicable DIN Rail BAA1000 BAP1000 (24) End Clip 10 45 9.5 60 BC9Z-E/NS35NPN10 10 48.6 32.8 BC9Z-E/NS35N BAA1000 BAP1000 9 Approx. 15g Steel (Zincplated) Approx. 15g LB/LBW Series Instructions Flush Silhouette Switch LB Series Flush Silhouette Switch LBW Series o16mm LB Series Miniature Switches and Pilot Lights Flush Silhouette LB Series Flush Silhouette LBW Series o16 LB Series UP Series Contents Safety Precautions 61 Instructions 61 Wiring 61 Operating Environment 61 Removing and Installing the Contact Block 62 Replacing the Lens and Marking Plate 62 Marking Plates and Films 63 Notes on Using Quick Connect Terminals 64 Maintained Pushbuttons 65 Selector Switches 65 Single Board Mounting 51 Installing and Removing Contact Blocks 51 Terminal Cover 61 Handling 61 Panel Mounting 62 Installing the Lens Unit and Contact Block 63 Replacing the LED Unit 64 Installing the Rubber Boot 65 Switches with Guard 65 Key Selector Switches 66 Mounting Holes and Assembly Procedure 51 Safety Precautions * Turn off the power to the LB/LBW series before installation, removal, wiring, maintenance, and inspection. Failure to turn power off may cause electrical shocks or fire hazard. * To avoid burning your hand, use the lamp holder tool when replacing the lamps. * For wiring, use wires of a proper size to meet voltage and current requirements. Solder correctly according to the instructions in "Wiring" and "Notes on Terminal Cover." Improper soldering may cause overheating and create a fire hazard. Also, when using tab terminals, use receptacles of appropriate size. Instructions Illuminated Pushbutton Wiring Operating Environment 1) Solder the terminals at 350C within 3 seconds using a 60W soldering iron. Sn-Ag-Cu type is recommended when using leadfree solder. When soldering, do not touch the LB series with the soldering iron. Also ensure that no tensile force is applied to the terminal. Do not bend the terminal or apply excessive force to the terminal. 2) Use non-corrosive liquid flux. * Do not use the LB/LBW series where corrosive gases exist or under an environment exceeding the operating temperature and humidity ranges. Otherwise, damages due to contact failure or change of surface color may occur. * Major parts of the switch are plastic. Scratches or damages may occur when scraped with a sharp object or applied with excessive load or shock. Note that this may cause operation and appearance failure of the operator and bezel. * Adherence of detergent, cutting oil, or special chemicals to the switch may result in operation failures and appearance failures such as change of surface color. Terminal Cover Solder/tab terminal Insert the terminal cover into the contact block with the TOP markings on the contact block and the terminal cover in the same direction. Note: When wiring, insert the lead wires into the terminal cover holes before soldering. After wiring, the terminal covers cannot be installed. Standard Bezel Flush Bezel Terminal Cover Terminal Cover Pilot Light Handling Pushbutton Selector Illuminated Selector Key Selector Lever Switch Buzzer Accessories Maintenance Parts Contacts (micro switch) When using NC (normally closed) and NO (normally open) contacts of the same microswitch, avoid connections of different voltages, or connections of different types of power supplies. Failure to observe this instruction may cause a short-circuit. Protection against oil (IP65) The LB series has been tested according to JIS C 0920: Appendix 1 by using water insoluble cutting oil Class N3, No. 8 (JIS K 2241) to prove that the switches will not be damaged by oil drops or splashes. This may not apply to special types of oils. Contact IDEC for details. 61 Panel Cut-out Instructions LB/LBW Series Instructions Instructions Removing and Installing the Contact Block Replacing the Lens and Marking Plate 1) Turn the locking lever on the contact block in the direction opposite to the arrow on the housing. Then the contact block can be removed. 2) Insert the contact block with the TOP markings on the contact block and the operator placed in the same direction. Then lock the units, turning the locking lever in the direction of the arrow. Removing [Removing the operator] Standard Bezel 1) From the opposite side of the TOP marking, remove the operator (lens, marking plate, and lens holder) using the optional lens removal tool (MT-101) by gripping the recesses of the color lens. Note: When removing/installing the contact block, or when using the contact block alone, do not apply excessive force on the actuator. Deformed actuator may affect contact operation. Locking Lever Flush Bezel 1) From the opposite side of the TOP marking, push the tip (width: 3 mm, thickness: 0.5 mm) of the flat screwdriver to the groove of the color lens and pull out the operator (lens, marking plate, lens holder). Note: For metallic bezels, the bezel may be damaged if the screwdriver is inserted from the TOP side or inserted deeply or with force into the groove of the lens. Actuator Panel Mounting Remove the contact block from the operator. Insert the operator into the panel cut-out from the front, then install the contact block to the operator. TOP Remove from the opposite side of the TOP marking (For Standard Bezel) Panel [Removing the Operator] Anti-rotation Ring TOP Locking Ring 2) Remove the marking plate by pushing the lens from the rear to disengage the latches between the lens and holder, using the screwdriver as shown below. TOP Contact Block (For Flush Bezel) Note: The translucent in the lens holder cannot be removed because this filter is sealed to make the unit waterproof and oiltight. Panel Anti-rotation Ring TOP Locking Ring TOP Contact Block Notes on Mounting Use the optional ring wrench (MT-001) to mount the operator onto the panel. The recommended tightening torque is 0.5 to 0.7 N*m. Do not use pliers. Excessive tightening will damage the locking ring. 62 LBW Series Pushbutton (button style) LBW series pushbuttons (button style, see page 28) can be removed according to the following procedure. LBW series pushbuttons (button style) cannot be removed from the front of the panel. [Removing the Operator] 1) Detach the operator unit and contact block. (See Removing and Installing the Contact Block at the top of the page.) 2) Remove the button unit (button, button holder) by pushing out the cross-shaped protrusion (white) at the back of the operator with a screwdriver. LB/LBW Series Instructions Instructions Flush Silhouette LB Series Installing the Lens Unit and Contact Block To insert the lens unit into the operator, press in the lens unit by making sure that the latch on the operator is aligned with the latch on the lens unit. Push out the cross-shaped protrusion (white) from the back of the operator unit. Round Lens Unit Removing the Button The button can be removed by inserting a small screwdriver into the groove of the button holder. Miniature screwdriver Button holder groove TOP Button To attach the button to the button holder, align the groove on cross-shaped protrusion with the positioning protrusion on the button and insert securely. o16 LB Series UP Series Latch Latch Standard BezelTOP LBW Series Square Lens Unit Latch Button holder (white) Flush Silhouette Latch TOP Latch Latch TOP Latch Recess Latch Round Lens Unit Square Lens Unit Operator Latch Latch Recess Operator Flush Bezel TOP Installing Insert the marking plate into the color lens, and press the lens onto the lens holder to engage the latches. Pay attention to the orientation of the marking plate. Latch Recess Operator LB/LBW Series Round Marking Plates and Films Latch Slit Lens Holder Pilot Light Pushbutton Selector LB Series (flush bezel / standard bezel) Applicable Marking Film Lens Holder LBW Series Square Latch Slit o13.7 Engraving Area Antirotation edge 12.0 Illuminated Selector Rectangular 12.0 12.0 Square Engraving Area Key Selector 0.8 o12.0 Engraving Area 0.8 Round 18.0 Lever Switch 19.7x13.7 13.7 Buzzer * Engraving must be made on the engraving area within 0.5 mm deep. * The marking plate is made of white acrylic resin. 13.6 Latch Slit Built-in Marking Plate Lens LB Series Square/Rectangular Engraged Area Marking Plate Illuminated Pushbutton For illuminated pushbuttons, pushbuttons with lens, and pilot lights, legends and symbols can be engraved on the marking plates, or printed film can be inserted under the lens for labelling purposes. Marking Plate and Marking Film Size Accessories Maintenance Parts Panel Cut-out 13.6 Engraged Area Marking Color Lens Plate Color Lens TOP Latch Positioning protrusion Button 0.8 Cross-shaped protrusion Button holder (white) 11.8 13.6 19.6 Instructions * Film thickness: 0.1 mm per film * Marking film is not included. * Recommended marking film: Polyester film Engraged Area Color Lens Marking Plate Lens Holder 63 LB/LBW Series Instructions Instructions Replacing the LED Unit LBW Series o17 14.0 o15.8 o14 5.15 0.85 18.4 Engraving Anti14.0 Area rotation edge o14 16.4 * Engraving thickness: 0.5 mm max. * The marking plate is made of white acrylic resin. Antirotation edge o15.8 o15.8 Contact Block o15.8 18.4 The LED unit can be replaced without tools by pulling out the lens unit from the contact block. Engraving Area 5.15 0.85 Antirotation edge 1.1 Round Extended Engraving Area Engraving Area 16.4 0.85 Square 0.85 o16.8 Round Flush o18.4 Applicable Marking Film Built-in Marking Plate Lens 14.0 14.0 16.4 * Film thickness: 0.1 mm per 2 films or 0.2 mm per film. * Marking film is not included. * Recommended marking film: Polyester film LED Unit Orientation of the LED unit Insert the LED unit into the contact block with the TOP markings on the contact block and LED unit in the same orientation. TOP TOP LBW Series (ring-illuminated model) Applicable Marking Film Lens Round (Note) Square o16 max. 18.4 * Film thickness: 0.1 mm max. Note: Use a film with adhesive and attach on the light shield sheet. Make sure that the marking film is properly installed and does not protrude from the edge of light shield sheet. Ring Illuminated Model Lens Holder Light shield sheet Insertion Order of Marking Plate and Film LB/LBW Series Round Notes on replacing the LED Unit When replacing the LED unit, make sure that static electricity is not applied. Make sure that the LB/LBW series has cooled down before replacing the LED unit. To avoid burn injuries, be careful not to touch the unit while it is still hot. Notes on Using Quick Connect Terminals 1) U se #110 tab quick connects, 0.5 mm-thick. 2) When connecting the terminals on the left and center, make sure that surfaces of the quick connects face each other. Otherwise, short-circuit may occur. TOP TOP Engraged Area Color Lens Film Marking Plate Lens Holder LB/LBW Series Square/Rectangular Engraged Area Color Lens Film Marking Plate Lens Holder Note: Film is not included. The marking plate must be engraved on the specified side as shown above. Pay attention to the orientation of the marking plate. When inserting a film, make sure to insert between the color lens and marking plate. Note: Marking plate is not supplied with ring-illuminated model. 64 Correct Incorrect 3) Apply only horizontal force against the panel to the tab. The switch may be damaged if a force other than a horizontal force is applied. LB/LBW Series Instructions Instructions Flush Silhouette LB Series Flush Silhouette Installing the Rubber Boot Flush Bezel When using in places where the switches are subjected to water splash or an excessive amount of dust, make sure to use the optional rubber boot. As shown in the drawing below, remove the gasket from the operator, and attach the rubber boot from the front (button side). Mount the rubber boot so that the protrusion at the bottom surface of the operator fits with the recess on the operator, placing the rubber boot all around the operator sleeve. Make sure that the protrusion on the rubber boot and the recess on the operator is properly fitted, otherwise, the waterproof and dustproof characteristics are not ensured. Standard Bezel How to Install the Rubber Boot For rectangular and square units, pull out the seals of the rubber boot and place them around the operator sleeve as shown below. Make sure that the seals are not twisted or tucked inside and that the gasket is removed, otherwise waterproof and dustproof characteristics are not ensured. LBW Series UP Series Good Example Protrusion How to Install the Rubber Boot o16 LB Series Recess Rectangular Remove Bad Example Seals Mount Seals Mount Operator Remove Gasket Note: Install the rubber boot before mounting the unit to the panel. Rubber boot installed Do not replace the buttons when the pushbutton is in the maintained position. Replacing the button in the maintained position may damage the internal mechanism. Also, do not remove the contact block with the button in the maintained position. The contact may not operate properly when the contact block is remounted. Make sure to push down fully when using the pushbuttons. Gasket Square Seals Seals Mount Operator Pushbuttons and Illuminated Pushbuttons with Switch Guard Remove Rubber boot installed Round Do not apply force to the switch guard when the switch guard is not attached to a panel. When opening the switch guard, do not open more than 180. The hinge may break. Pilot Light Selector Illuminated Selector Key Selector When turning the operator or key, make sure that they are properly turned to each position. Operator Illuminated Pushbutton Pushbutton Selector Switches Gasket Mount Maintained Pushbuttons Lever Switch Buzzer Accessories Remove Maintenance Parts Panel Cut-out Rubber boot installed Instructions Gasket 65 LB/LBW Series Instructions Selector Switches with Key Switch Guards Observe the following instructions to prevent malfunction or damage. * Insert the key to the bottom of the key hole. * Do not remove the key from any key retained position. * Besides the standard key (key number 0H), six other key numbers are available. Use a key of the matching number with the key cylinder. The standard key does not have a key number indication. * Keys are available in two types. Key numbers 0H (standard), 1H, and 2H are reversible keys which can be inserted in two ways. Key numbers 3H, 4H, 5H, and 6H are non-reversible keys. Make sure of correct insertion direction. Opening/closing the Switch Guard When opening/closing the switch guard while the switch guard is not installed on a panel, make sure to hold the hinge. Holding the base might result in damage. Also do not apply force on the guard in other than open/close directions, otherwise the hinge may be damaged. Hinge Countermeasures against Dim Lighting Leakage currents through transistors or a contact protection circuit may cause the LED lamp to illuminate dimly even when the output is off. When the LED lamp is illuminated by a transistor output, take the following measure. Shunt Resistor LED Pilot Light Leakage Current Shunt Resistor Allotment Table (Recommended) Leakage Current Io 0.1 mA max. 0.1 to 0.7 mA Shunt resistance R Red (R), White (W) Green (G) Resistance Rated Power Resistance Rated Power 13k 0.25W 18k 0.25W 2k 0.25W 2.7k Base Rubber Gasket when using LB9Z-K2 Switch Guard (remains open) for Round/Square Units Choose to use or not to use the rubber gasket for the switch referring to the conditions described below. Note that the degree of protection is IP40 withmax. or without the rubber a) Panel thickness 2.8mm gasket. * When the panel thickness is up to 2.8mm Install the switch onto the switch guard with rubber gasket, and mount on the panel. w/rubber gasket 0.25W Noise LED elements deteriorate due to extraneous noise, thicknessdecrease 2.8mm max. in luminance, hue change, resulting a) inPanel significant or failure of lighting. When such effects are anticipated, take a protection measure shown below. However, measures may differ according to operating environment and condition Zener Diode w/rubber gasket b) Panel thickness 2.8 to 3.2mm * When the panel thickness is 2.8 to 3.2mm Remove the rubber gasket from the switch and install the switch onto the switch guard, and mount on the panel (discard the rubber gasket). w/o rubber gasket (Zener diode reference value) Zener voltage: 4.3 to 4.7V (+) (-) Static Electricity (UP Series) UPb)series are delicate products that may be damaged by Panel thickness 2.8 to 3.2mm static electricity Make sure to take measures to prevent static electricity. w/o rubber gasket 66 Single board mounting * Single boardc)mounting Remove the rubber gasket from the switch and install the switch onto the switch guard, and mount on the panel (discard the rubber gasket). w/o rubber gasket www.idec.com Head Office 6-64, Nishi-Miyahara-2-Chome, Yodogawa-ku, Osaka 532-0004, Japan USA Germany Singapore Thailand Australia Taiwan IDEC Corporation APEM GmbH IDEC Izumi Asia Pte. Ltd. IDEC Asia (Thailand) Co., Ltd IDEC Australia Pty. Ltd. IDEC Taiwan Corporation Tel: +1-408-747-0550 Tel: +49-40-25 30 54 - 0 Tel: +65-6746-1155 Tel: +66-2-392-9765 Tel: +61-3-8523-5900 Tel: +886-2-2698-3929 opencontact@idec.com service@eu.idec.com info@sg.idec.com sales@th.idec.com sales@au.idec.com service@tw.idec.com Specifications and other descriptions in this brochure are subject to change without notice. 2018 IDEC Corporation, All Rights Reserved. EP1609-10 APRIL 2018 Hong Kong China/Shanghai China/Shenzhen China/Beijing Japan IDEC Izumi (H.K.) Co., Ltd. IDEC (Shanghai) Corporation IDEC (Shenzhen) Corporation IDEC (Beijing) Corporation IDEC Corporation Tel: +852-2803-8989 Tel: +86-21-6135-1515 Tel: +86-755-8356-2977 Tel: +86-10-6581-6131 Tel: +81-6-6398-2527 info@hk.idec.com idec@cn.idec.com idec@cn.idec.com idec@cn.idec.com marketing@idec.co.jp