CARDINAL COMPONENTS CLP Series CLP3 CLP4 CLP5 CLP6 Low Profile Crystals Cardinal "AT-Strip" low profile crystals come in a variety of heights and specifications to accommodate all of our customers' requirements. Part Numbering Example: CLP X - A1 B2 C2 200 - 3.579545 D18 - 3 CLP X SERIES CLP CLP3 CLP4 CLP5 CLP6 ADDED FEATURES F = FORMED LEADS W = VINYL SLEEVING X = INSULATOR PAD Y = THIRD LEAD Z = TAPE AND REEL BLANK = BULK PACK A1* B2 C2 200 3.579545 D18 *NOTE: The above ABC combinations cover basic specification options. We tailor our crystal specifications to meet customer requirements. Please contact our sales department if you don't see exactly what you need. Specifications: CLP Frequency Range: 3.579545 ~ 38.000 MHz 25.000000 ~ 75.000 MHz 26.000000 ~ 42.000 MHz Operating Temperature: -10C ~ +70C -40C ~ +85C Frequency Stability: 100 50 30 15 ppm ppm ppm ppm 100 50 30 10 ppm ppm ppm ppm Frequency Tolerance: (at 25C) Load Capacitance: AT Cut Fundamental AT Cut 3rd Overtone BT Cut Fundamental Standard Standard Standard Standard 18 pF or series. Please specify your required load. Resistance: Maximum resistance corresponds to frequency. See chart below. Standard: Mode: Fundamental or 3rd Overtone Shunt Capacitance: 7 pF Max Aging: 5 ppm/year Drive Level: 1.0 mW Max Optional Features: CLP3 Formed Leads Vinyl Sleeves Insulator Pads Radial Tape and Reel Note 1: Not all combinations of the above tolerances, stabilities, and temperature ranges are available. Consult the factory if your requirement is not standard. Note 2: Heights of 3.5 mm (0.138) and 2.5 mm (0.098) are also available. Please consult factory if required. Resistance Chart: All resistances are maximum values. EQUIVALENT SERIES RESISTANCE (ESR), MODE OF OPERATION (MODE), AND CUT Frequency MHz 3.579545~4.999 5.000~5.999 6.000~7.999 8.000~8.999 9.000~9.999 10.000~14.999 ESR() 200 Max 150 Max 120 Max 90 Max 80 Max 70 Max -3 OPERATING TEMP. STABILITY TOLERANCE RESISTANCE FREQUENCY LOAD CAP. OVERTONE D16,18,20,ETC. BLANK: FUND. A0 = -10C ~ +60C B1 = 100 C1 = 100 SEE CHART -3: 3rd OT DS = SERIES BELOW A1 = -10C ~ +70C B2 = 50 C2 = 50 -5: 5th OT A2 = -40C ~ +85C B3 = 30 C3 = 30 -7: 7th OT A3 = -55C ~ +125C B4 = 10 C4 = 10 -BT: BT Cut Mode/cut Fund./AT Fund./AT Fund./AT Fund./AT Fund./AT Fund./AT Frequency MHz 15.000~15.999 16.000~23.999 24.000~30.000 24.000~48.000 24.576~29.999 30.000~75.000 ESR () 60 Max 50 Max 40 Max 40 Max 150 Max 100 Max Mode/cut Fund./AT Fund./AT Fund./AT Fund./BT 3rd Overtone/AT 3rd Overtone/AT Cardinal Components, Inc., 155 Rt. 46 W, Wayne, NJ. 07470 TEL: (973)785-1333 FAX: (973)785-0053 http://www.cardinalxtal.com E-Mail: cardinal@cardinalxtal.com 12