SMP Interconnect Series FEATURES INTRODUCTION Carlisle Interconnect Technologies launched the SMP "push-on" connector product line about two decades ago to facilitate dense packaging within RF/Microwave systems. The SMP interface has enabled design engineers to increase performance and complexity of their designs and improve upon their form factor. The SMP interconnect series relies on a floating femaleto-female adapter--commonly referred to as a "bullet"-- to enable stacking of boards equipped with an SMP male PCB connector. This durable construction and ability to tolerate radial and axial misalignment allows for a blindmate interconnect solution. SMP connectors can also withstand multiple engagement/disengagement cycles without degradation in electrical performance. The success of the SMP product line has spurred the development and commercialization of other blind-mate interconnect systems - namely the SSMP(R), TMP(R) and WMP(R) to facilitate rapid assembly and testing for the gamut of Military and Commercial RF/Microwave applications. MATERIALS & FINISH Metal Specification BeCu (Beryllium Copper) ASTM B 196 and/or ASTM B 197 Brass ASTM B 36, B121, B16, B16M Stainless Steel ASTM A484/ A582 or A555/581 Iron-Nickel-Cobalt ASTM F-15 Dielectric Specification Virgin PTFE Fluorocarbon ASTM D 1710 and ASTM D 1457 Polyamide-imide ASTM D5204 Group 2 Class 1 Glass Corning 7070 or Equivalent Finish Specification Gold (75u in. Typ) ASTM-B488 Type 1, Class 1.25 Nickel (100u in. Typ) SAE AMS-QQ-N-290 Pasivation ASTM A967 Frequency Range: DC - 40 GHz 50 Impedance; Blindmateable configuration Industry standard per MIL-STD-348 MIL-PRF-39012 compliant Ability to withstand Radial/Axial Misalignment Board-mount, Field-replaceable, Bullets, Hermetic and Cable Connector configurations Custom Connectors Available SPECIFICATIONS Parameter Specification Impedance 50 Frequency range DC - 40 GHz VSWR DC - 26 GHz: 1.15 : 1 (max) 26 - 40 GHz: 1.40:1 (max) Insertion Loss 0.1 x f(GHz) DWV @ Sea Level 500 Vrms Insulation Resistance 5000 M (min) RF High Pot 325 Vrms @ 5 MHz Force to Engage Force to Disengage Full Detent 15 lbs typical Limited Detent 7 lbs typical Smooth Bore 2 lbs typical Full Detent 5 lbs typical Limited Detent 3 lbs typical Smooth Bore 0.5 lbs typical Radial Misalignment +/- .020 inches* Axial Misalignment .010 inches Temperature range -55 C to +165 C Thermal Shock MIL-STD-202, Method 107, Cond B Moisture Resistance MIL-STD-202, Method 106, except step 7b Corrosion MIL-STD-202. Method 101, Cond B Vibration MIL-STD-202, Method 204, Cond D Shock MIL-STD-202, Method 213, Cond I *When mated to a Catcher's Mitt interface Carlisle Interconnect Technologies / 12900 Alondra Blvd., Cerritos, CA 90703 Toll Free - 866.282.4708 / Fax - 562.494.0955 / CarlisleIT.com SMP Configurations CABLE CONNECTORS - FOR FLEXIBLE CABLES SMP Female Right Angle Connector for Flexible Cables, 26.5 GHz / P601 SMP Female Straight Connector for Flexible Cables / P657 Anti-rock ring SMP Female Straight Connector for Semi-Rigid and Semi-Flex Cables / P651 Anti-rock ring smp female interface per mil-std-348 smp female interface per mil-std-348 (.265) smp female interface per mil-std-348 CABLE CONNECTORS - FOR SEMI-RIGID & SEMI-FLEX CABLES (.265) .300 SMP FEMALE INTERFACE PER MIL-STD-348 SEE APPLICABLE DASH(ES) NUMBER(S) FOR CABLE TYPE(S) (.484) (.237) (.153) DIELECTRIC STOP CENTER CONDUCTOR (O .293) (2x O .135) (.304) O .135 Max CARLISLE (O .135 MAX) OA (.75) (.221) Center Conductor .135 r.p. (.75) Heat Shrink Tubing P/N Cable Type -1CC RG178 -2CC RG316 -3CC RD178 -4CC RD316 -9CC TLL18-1087 R.P. (.252) Dielectric Stop shrink tubing shrink tubing flexible cable (.200) (2x O .135) DIELECTRIC STOP (.200) R.P. SMP FEMALE INTERFACE PER MIL-STD-348 ANTI-ROCK RING (O .135 MAX) OA P/N (O A) Cable Type FIGURE -9CC (.090) TLL18-1087 1 -11CC (.122) TLL40-1111A 2 (.252) (.300) R.P. Figure 2 SMP Male Straight Panel Moount Connector for Flexible Cables / P663 P/N Cable Type -1CC (.200) PANEL THICKNESS .150.003 (.200) PANEL THICKNESS cap cap METAL SLEEVE (FOR -6CC) THRU -10CC AND -12CC) Figure 2 Figure 2 Figure 1 (.150) FLOAT MOUNT Figure 1 flexible cable R.P. SMP Female Right Angle Connector for Flexible Cables, 18 GHz / P600 FOR .093 PANEL R.P. (.75) HEAT SHRINK TUBING SMP FEMALE INTERFACE PER MIL-STD-348 ANTI-ROCK RING (O .135 MAX) (O .135 MAX) See tabulation for cable type(s) .252 SMP Female Float Mount Connector for Semi-Rigid and Semi-Flex Cables / P658 (Continued) FLEX CABLE SCREWDRIVER SLOT (O A) O .047 SEMI-RIGID CABLE P/N CABLE TYPE -1CC UFF O .092A -2CC M17/113-RG316 -3CC TLL40-1087 -4CC MICROFLEX O .095 -5CC O .085 SEMI-RIGID -6CC UFF O .092A -7CC M17/113-RG316 FIGURE 1 -8CC TLL40-1087 -9CC MICROFLEX O .095 FIGURE -10CC O .085 SEMI-RIGID 2 -11CC O .047 SEMI-RIGID 1 -12CC O .047 SEMI-RIGID 2 .049 MIN -2CC O .085 SEMI-RIGID CABLE .085 MIN 1 -3CC O .047 MICROPOROUS CABLE .047 MIN 2 -4CC O .085 MICROPOROUS CABLE .085 MIN 1 2 (.330) (.260) (.344) O .233.001 SMP MALE INTERFACE PER MIL-STD-348 (.110) R.P. R.P. SMP Female Right Angle For Semi-Rigid/Semi-Flex Cables, 12 GHz / P652 (.211) .050.001 SMP Female Float Mount Connector for Semi-Rigid and Semi-Flex Cables / P658 Recommended Panel Hole R.P. (.255) O .201.001 (.364) smp female interface per mil-std-348 smp female interface per mil-std-348 (O .131) (O .230) .095 .091 (11/64--56 UNRS--2A) (.240) across flats (O .375) (.186) (.050) Dielectric bead (O .125) O .283 .002 O .273 .271 carlisle center conductor Figure 1 Recommended Mounting Panel Figure 2 P/N CABLE TYPE INTERFACE CATCHER'S MITT -7CC M17/113-RG316 (OR EQUIVALENT) LIMITED DETENT RD178 (OR EQUIVALENT) CATCHER'S MITT -8CC CABLE TYPE M17/93-RG178 (OR EQUIVALENT) P/N (O A) Cable Type FIGURE -1CC -9CC (.090) TLL18-1087 1 -2CC -11CC (.122) TLL40-1111A 2 -3CC -4CC -5CC -6CC 2 (.265) (.325) P/N M17/113-RG316 (OR EQUIVALENT) INTERFACE CATCHER'S MITT RD316 (OR EQUIVALENT) CATCHER'S MITT M17/93-RG178 (OR EQUIVALENT) LIMITED DETENT RD178 (OR EQUIVALENT) LIMITED DETENT CAP OA shrink tubing (.155) O .159 OA (O A) (.150) SMP FEMALE INTERFACE PER MIL-STD-348 Anti-rock ring (O .120) (O .185) (O .135) max 30 (O .198) Anti-rock ring ANTI-ROCK RING -9CC RD316 (OR EQUIVALENT) LIMITED DETENT M17/93-RG178 (OR EQUIVALENT) -10CC RD178 (OR EQUIVALENT) -11CC M17/113-RG316 (OR EQUIVALENT) -12CC RD316 (OR EQUIVALENT) SMP FEMALE INTERFACE PER MIL-STD-348 (.484) (.153) (.237) SEE APPLICABLE DASH(ES) NUMBER(S) FOR CABLE TYPE(S) CENTER CONDUCTOR (O .293) DIELECTRIC STOP HEAT SHRINK TUBING CARLISLE FULL DETENT FULL DETENT FULL DETENT P/N OA CABLE TYPE -1CC .049 MIN .047 SEMI-RIGID -2CC .088 MIN .085 SEMI-RIGID -3CC .049 MIN .047 MICROPOROUS -4CC .088 MIN .085 MICROPOROUS (.75) (.221) R.P. FOR .093 PANEL CENTER CONDUCTOR (FOR -11CC) DIELECTRIC STOP (FOR -11CC) Figure 1 FULL DETENT 3 SMP Configurations CABLE CONNECTORS - FOR SEMI-RIGID & SEMI-FLEX CABLES (CONT.) SMP Female Right Angle For Semi-Rigid/Semi-Flex Cables, 26.5 GHz / P655 SMP Male PCB Mount to a Straight Termination / P654 (.375) Across Flats (O .375) (11/64-56 UNRS-2A) (.186) SMP FEMALE INTERFACE PER MIL-STD-348 (.200) SMP Male Straight PCB Mount - Square Body / P603 (.050) (O .198) (.135) smp male interface per mil-std-348 (.196) (5X C) (O B) (.110) (.110) dielectric bead (O .125) (O .028) R.P. (O A) (4X O .044) (O .230) (O .135 MAX) (O .375) (.110) (.200) R.P. R.P. 4X (.182) R.P. 4X (.010) 5X (.140) 5X (.140) (.100 TYP) center conductor (.325) 4X (.182) R.P. 4X (.010) (4X O .027) (.086) R.P. smp male interface per mil-std-348 (O A) smp male interface per mil-std-348 (O A) R.P. (.265) PCB CONNECTORS - THROUGH HOLE BOARD MOUNT SMP Male Bulkhead Panel Mount Connector for Semi-Rigid Cables / P662 Figure 1 (.240) Figure 1 Figure 2 ANTI-ROCK RING OA (.196) P/N OA CABLE TYPE -1CC .049 MIN .047 SEMI-RIGID -2CC .088 MIN .085 SEMI-RIGID -3CC .049 MIN .047 MICROPOROUS -4CC .088 MIN .085 MICROPOROUS SMP FEMALE INTERFACE PER MIL-STD-348 (.190) (.150) P/N .050.001 4X O .037/.039 O .031/.034 Recommended Panel Hole 2X .050 DIELETRIC STOP Figure 1 R.P. (.255) (.190) (1.5000) SMP FEMALE INTERFACE PER MIL-STD-348 (.135) INTERFACE (O A) FIGURE -1CC FULL DETENT .116 1 -2CC LIMITED DETENT .120 1 -3CC SMOOTH BORE .125 1 -4CC CATCHER'S MITT .125 2 (.150) ANTI-ROCK RING OA .150 TYP. (.200 SQ.) Figure 2 cable Installed View (.224) (.224) ANTI-ROCK RING 4 (O .272) Recommended Mounting Hole Pattern (.100 TYP) R.P. (O .375) smp male interface per mil-std-348 4X (O .068) (O .015) (4X O .027) (.086) R.P. O .201.001 O .021 .019 2X .150 .145 (4X O .044) smp male interface per mil-std-348 Screwdiver slot (O .135 MAX) OA (O .028) (.110) O .233.001 4X (O .030) .076 .074 4X O .037 .035 (O A) .150.003 R.P. (O B) R.P. (.230) CAP (.200) PANEL THICKNESS (.200) PANEL THICKNESS SMP Female Right Angle For Semi-Rigid/Semi-Flex Cables, 18 GHz / P659 CAP (5X C) Figure 2 P/N OA CABLE TYPE Figure -1CC .049 MIN O .047 SEMI-RIGID 1 -2CC .088 MIN O .085 SEMI-RIGID 2 -3CC .049 MIN O .047 MICROPOROUS 1 -4CC .088 MIN O .085 MICROPOROUS 2 P/N CABLE TYPE INTERFACE -1CC O .047 S/R CATCHER'S MITT -2CC O .085 S/R CATCHER'S MITT -3CC O .047 L/L CATCHER'S MITT -4CC O .085 L/L CATCHER'S MITT 2X .100 Recommended Mounting Hole Pattern SMP Male Right Angle PCB Mount / P646 -5CC O .047 S/R FULL DETENT P/N INTERFACE (O A) (O B) (C) FIGURE -6CC O .085 S/R FULL DETENT -1CC LIMITED DETENT .120 (.218) .079 2 -7CC O .047 L/L FULL DETENT -2CC FULL DETENT .116 (.218) .079 2 -8CC O .085 L/L FULL DETENT -3CC SMOOTH BORE .125 (.218) .079 2 -9CC O .047 S/R LIMITED DETENT -4CC CATCHER'S MITT .125 (.235) .079 1 -10CC O .085 S/R LIMITED DETENT -5CC FULL DETENT .116 (.218) .100 2 -11CC O .047 L/L LIMITED DETENT -6CC LIMITED DETENT .120 (.218) .100 2 -12CC O .085 L/L LIMITED DETENT -7CC SMOOTH BORE .125 (.218) .100 2 -13CC O .085 S/R LIMITED DETENT / CATCHER'S MITT -8CC CATCHER'S MITT .125 (.235) .100 1 -9CC FULL DETENT .116 (.218) .140 2 -10CC LIMITED DETENT .120 (.218) .140 2 -11CC SMOOTH BORE .125 (.218) .140 2 -12CC CATCHER'S MITT .125 (.235) .140 1 smp male interface per mil-std-348 (.320) (O A) (4X .015) (4X .092) R.P. (.110) .102 .098 (5X C) 4X O .032 .028 2X .051 .048 (5X B) R.P. (4X O .020) (4X O .042) .102 .098 (O .024) O .034 .031 (.050 TYP.) (O .164) (.100 TYP.) (.120 SQ.) Recommended Mounting Hole Pattern (.010 TYP.) (.110) R.P. (4X O .020) P/N INTERFACE (O A) (O B) (C) -1CC FULL DETENT .116 .125 .287 -2CC FULL DETENT .116 .115 .297 -3CC FULL DETENT .116 .155 .337 5 SMP Configurations PCB CONNECTORS - SURFACE MOUNT SMP Male Straight to Surface Mount with Posts / P797 SMP Shroud Solder-in Surface Mount - Short Body / P677 SMP Male Straight Surface Mount / P839 (.125) (O A) smp male interface per mil-std-348 .113 2X .050 (O .075) (.026) R.P. (O A) (O .164) (O .195) (.200) (.085 TYP) O .015 (.010) 4X (B) 2X (O .165) (.200) R.P. 2X .078 (.095) (.054) 2X .078 smp male interface per mil-std-348 (.020) INTERFACE -1 FULL DETENT .116 LIMITED DETENT .120 SMOOTH BORE .106 (4X O .020) (O .179) 2X .007 (.179 SQ) .031 .024 .125 .113 smp male interface per mil-std-348 (.026) R.P. (.010) 4X (B) (2X .068) O .015 (.054) P/N INTERFACE (O A) -1CC FULL DETENT .116 -2CC LIMITED DETENT .120 -3CC SMOOTH BORE .125 (2X .065) (O .193) Figure 1 Figure 1 O .012 TYP (O .075) .113 (O .165) (O A) smp male interface per mil-std-348 (.026) R.P. .021 .051 O .180/.175 .054 R .015 TYP. .030 TYP. smp male interface per mil-std-348 .089 R .015 TYP. .046 TYP. .0425 TYP. 2X .019 .088 Mounting Hole Pattern Dimensions shown are for Rogers 4350 PCB Material. These dimensions may vary depending on PCB material used. O .075 .171 (O A) (B) FIGURE FULL DETENT (.116) .075 1 -2CC LIMITED DETENT (.120) .075 1 -3CC SMOOTH BORE (.125) .075 1 -4CC CATCHER'S MITT (.125) .075 2 -5CC FULL DETENT (.116) .140 1 .140 INTERFACE (O A) FIGURE -1CC FULL DETENT (.116) 1 -2CC LIMITED DETENT (.120) 1 -3CC SMOOTH BORE (.125) 1 -4CC CATCHER'S MITT (.125) 2 O .250 2X .045 WIDE TABS 2X .218 2X .145 PCB Mount Detail (2X Full R .0125) 1 -7CC SMOOTH BORE (.125) .140 1 -8CC CATCHER'S MITT (.125) .140 2 (O A) FIGURE FULL DETENT (.116) 1 -2CC LIMITED DETENT (.120) 1 -3CC SMOOTH BORE (.125) 1 -4CC CATCHER'S MITT (.125) 2 E G B smp male interface per mil-std-348 FULL DETENT (LESS CONTACT) (O .029) TPY PLATED THRU HOLES (.268) .050 TYP 2X .073 .305 .238 .170 .165 INTERFACE SMP Shroud - Full Detent Straight 2-Hole Flange Mount / P670 2X .074 .160 P/N -1CC SHROUDS - FLANGE MOUNT R.P. INTERFACE (.120) O .015 OA (.110) P/N LIMITED DETENT .175 2X .015 THICK TABS O .162 A OD .059 .051 .021 .019 .045 .110 .002 2X D .200 Recommended PCB Cutout P/N P/N P/N 3X B PLATED THROUGH HOLES -1CC -6CC O .075 Recommended PCB Mounting Pattern R.P. .200 .055 TYP .059 SMP Male Straight Edge Mount Connector / P606 (O .235) O .015 (.054) Figure 2 .089 4X O .025 O .180/.175 .085.002 TYP .054 .019 Dimensions shown are for Rogers 4350 PCB Material. These dimensions may vary depending on PCB material used. (.200) (.010) .075 TYP Mounting Hole Pattern 2X (O .165) (.110) .051 .021 PCB CONNECTORS - EDGE MOUNT .030 TYP .044 .020 .057 TYP .018 TYP .050 TYP (.054) Figure 2 .019 2X (O .165) (O .015) (2X .068) (2X .007) (2X .065) (O .075) (.200) (.010) (.126) (.078) (O .075) (4X O .020) .113 R.P. R.P. (.126) (.078) Figure 2 (O .165) (O A) (.026) (.050) CENTER CONDUCTOR (.110) (.050) CENTER CONDUCTOR R.P. Grounded Coplanar Waveguide: Rogers 4350 2X (O .165) (.085 TYP) (O .235) (.200) SMP Male Straight Surface Mount / P703 (.110) (O .015) CENTER CONDUCTOR (2X .007) (O .165) (O A) (.110) smp male interface per mil-std-348 (.125) (O .235) O A (.020) smp male interface per mil-std-348 Mounting Hole Pattern (O .078) (O .022) (O .015) CENTER CONDUCTOR (.307) R.P. (O .164) O A .040 .137 (O A) -2 .168 .070 Figure 1 -3 (2X .065) (2X .026) R.P. (.110) .174 (.110) (.110) smp male (CATCHERS MITT) interface per mil-std-348 (.307) (O .164) (O .165) (O A) (.120) R.P. R.P. P/N SMP Male Straight Edge Mount Connector / P698 INTERFACE OA B C -1CC FULL DETENT .116 .090 .095 -2CC LIMITED DETENT .120 .090 .095 -3CC SMOOTH BORE .125 .090 .095 -4CC FULL DETENT .116 .050 .055 -5CC LIMITED DETENT .120 .050 .055 -6CC SMOOTH BORE .125 .050 .055 A B OC 2X O C R.P. OD E F G -1SF .328 .187 .098 .480 .120 .045 .004 -2SF .481 .223 .102 .625 .120 .045 .002 -3SF .282 .165 .073 .400 .120 .045 .002 -4SF .400 .186 .103 .550 .120 .045 .004 -5SF .282 .165 .073 .400 .120 .045 .005 -6SF .282 .165 * .400 .120 .045 .005 -7SF NR NR NR .625 .120 .075 .003 -8SF .481 .223 .102 .625 .120 .045 .004 -8 .481 .223 .102 .625 .120 .045 .004 -9SF .282 .165 .073 .400 .120 .045 .004 -10SF .328 .187 .098 .480 .120 .045 .005 * 2X #0-80 UNF-2B X O .085 X 90Countersunk 6 7 SMP Configurations SHROUDS - FLANGE MOUNT (CONT.) SMP Shroud - Limited Detent Straight 2-Hole Flange Mount / P672 .120 SHROUDS - FIELD-REPLACEABLE SMP Shroud - Thread-In / P676 (Continued) E B smp male interface per mil-std-348 FULL DETENT (LESS CONTACT) SMP (male) 2-hole flange mount (accepts 0.012" pin) / P836 (1/4-48 UNS-2A THREAD) smp male interface per mil-std-348 (.030) SCREW DRIVER SLOT (.120) (.004 X45) P/N INTERFACE (C) D E F -1CC FULL DETENT .116 .120 .040 .037/.039 .050 .050.001 -2CC LIMITED DETENT .120 .120 .040 .037/.039 .050 050.001 -3CC SMOOTH BORE .125 .120 .040 .037/.039 .050 050.001 -4CC FULL DETENT .116 .120 .040 .037/.039 .050 050.001 -5CC LIMITED DETENT .120 .120 .040 .037/.039 .050 050.001 -6CC SMOOTH BORE .125 .120 .040 .037/.039 .050 050.001 -10CC FULL DETENT .116 .120 .040 .037/.039 .070 050.001 -11CC LIMITED DETENT .120 .120 .040 .037/.039 .070 050.001 1 -12CC SMOOTH BORE .125 .120 .040 .037/.039 .070 050.001 1 -13CC FULL DETENT .116 .120 .040 .037/.039 .090 050.001 -14CC LIMITED DETENT .120 .120 .040 .037/.039 .090 050.001 -15CC SMOOTH BORE .125 .120 .040 .037/.039 .090 050.001 -22CC FULL DETENT .116 .120 .040 .037/.039 .050 050.001 -23CC LIMITED DETENT .120 .120 .040 .037/.039 .050 050.001 -24CC SMOOTH BORE .125 .120 .040 .037/.039 .050 050.001 -25CC FULL DETENT .116 .120 .040 .037/.039 .070 050.001 -26CC LIMITED DETENT .120 .120 .040 .037/.039 .070 050.001 -27CC SMOOTH BORE .125 .120 .040 .037/.039 .070 050.001 -28CC FULL DETENT .116 .120 .040 .037/.039 .090 050.001 -29CC LIMITED DETENT .120 .120 .040 .037/.039 .090 050.001 -30CC SMOOTH BORE .125 .120 .040 .037/.039 .090 050.001 R.P. .229.002 .110 .002 .045 R.P. D Figure 2 A O .164.001 P/N INTERFACE FIGURE -1SF FULL DETENT 1 -2SF 2X O C LIMITED DETENT -3SF SMOOTH BORE -4SF CATCHER'S MITT P/N 2 A B OC OD E -1SF .328 .187 .098 .480 .004 -1CCSF -2SF .481 .223 .102 .625 .004 -2CC -3SF .282 .165 .073 .400 .002 -4SF .400 .186 .103 .550 .004 -1CC -3CC O .176/.178 STRAIGHT KNURL (B) (.110) -5CC -5CCSF (O D) (A) (F) (.045) 2X O C (E) P/N (A) (B) (O C) (O D) (E) (F) -1SF .328 .187 .098 .480 .120 .004 -2SF .481 .223 .102 .625 .120 .002 -3SF .282 .165 .073 .400 .120 .002 SMOOTH BORE (.125) Recommended Mounting Hole FULL DETENT (.116) LIMITED DETENT (.120) SMOOTH BORE (.125) -7CCSF -8CC P/N INTERFACE -1SF FULL DETENT -2SF LIMITED DETENT -3SF SMOOTH BORE OC .165 .625 D OE .481.002 .078 (.125) (.120) -6CCSF -8CCSF smp male interface per mil-std-348 (SMOOTH BORE) OC B (.120) LIMITED DETENT -7CC R.P. smp male interface per mil-std-348 (LESS CONTACT) (O .125) AS REQ'D (.116) (.116) -6CC O .1735 .0010 FULL DETENT FULL DETENT -4CCSF (O .170) (O .050) (O .164) -4CC AS REQ'D .100 MIN A SMOOTH BORE -3CCSF .005 X 45 CHAMBER (.120) INTERFACE LIMITED DETENT -2CCSF SHROUDS - PRESS-IN SMP Press-In Shroud / P675 R.P. O .124.001 (O A) smp male interface per mil-std-348 (FULL DETENT) P/N SMP Shroud - Smooth bore Straight 2-Hole Flange Mount / P673 2X O E FEMALE SOCKET TO ACCEPT O .012.001 PIN (.110) (.050) (O .224) OD B .065 .002/.005 R.P. (O .050) O .162 SMP Male Hermetic Shroud - Short Body / P680 (Continued) .223 .625 .223 .485 .481.002 .078 .350.002 (O A) (B) -9CCSF See detail A see detail b SMP Male Hermetic Shroud / P682 .102 SEE DETAIL A & B (.120) -9CC G (O .099) (O .0150) (O .164) (O A) HERMETICS smp male interface per mil-std-348 SMP Male Hermetic Shroud - Short Body / P680 SMP Press-In Shroud - Short Body / P769 R.P. .123 .078 (.180) SOLDER PREFORM .015 .011 L O .081 .077 O .140 .135 SQUARE CUT G FULL RADIUS O .036 .034 R.P. F Detail A O .102 .101 .007 .005 (O .0150) (O C) (D) STRAIGHT KNURL SHROUDS - THREAD-IN smp male interface per mil-std-348 (O B) SMP Shroud - Thread-In / P676 (.004 X45) (O .160) (O .050) (.120) (.050) Figure 1 8 P/N -1SF (A) .080 (O B) .143 (O C) .154 Detail A smp male interface per mil-std-348 (C) E AS REQ'D -2SF .120 .163 .174 50P -3SF .115 .163 .184 128P .007 .005 .015 .013 SOLDER PREFORM O .140 .135 50P .078 .076 Recommended Mounting Hole (O .099) (B) (D) Installation View Detail B .057 .055 E .082 (A) (10-48 UNS-2A THREAD) smp male interface per mil-std-348 (.030) SCREW DRIVER SLOT (O .145) (O A) O .1020 .1010 FULL RADIUS O .081 .077 O .036 .134 AS REQ'D Recommended Mounting Hole D AS REQ'D Detail B P/N INTERFACE (O A) L E DETAIL -1CC FULL DETENT .116 .050 .030 A -2CC LIMITED DETENT .120 .050 .030 A -3CC SMOOTH BORE .125 .050 .030 A -4CC FULL DETENT .116 .240 .220 B -5CC LIMITED DETENT .120 .240 .220 B -6CC SMOOTH BORE .125 .240 .220 B 9 SMP Configurations HERMETICS (CONT.) SMP Male Hermetic Thread-In with Mounting Nut / P683 .125 R.P. (.507) (.135) O.165 R.P. .050 (.180) P/N Recommended Mounting Hole INTERFACE (O A) -1CC FULL DETENT (.116) -2CC LIMITED DETENT (.120) -3CC SMOOTH BORE (.125) P/N INTERFACE (O A) -1CCSF FULL DETENT .116 -2CCSF LIMITED DETENT .120 -3CCSF SMOOTH BORE .125 smp FEmale interface per mil-std-348 R.P. (.110) R.P. (.065) (O A) (O .164) (O .135) MAX A O .054 (.187 HEX) smp male interface per mil-std-348 (.134) 2X O .135 MAX (O .164) (O A) (O .015) OA (.250 HEX) R.P. 2X .135 smp FEmale interface per mil-std-348 (2 PLC'S) (.340) .010 10-48 UNS-2A THREAD (.110) smp male interface per mil-std-348 Anti-Rock Ring smp male interface per mil-std-348 SMP Male to SMP Female Adapter / P914 SMP Female to SMP Female Bullet / P617 (Continued) SMP Male 50 Ohm Termination / P919 (.110) Figure 3 DIAMOND KNURL R.P. P/N A figure P/N A figure P/N INTERFACE (O A) -1CC .768/.770 1 -6CC .414/.416 1 -2CC .850/.852 1 -7CC .427/.429 1 -1CCSF FULL DETENT .116 -2CCSF LIMITED DETENT -3CC 1.365/1.367 1 -8CC .538/.540 3 .120 -3CCSF SMOOTH BORE -4CC .439/.441 2 -9CC .528/.530 3 .125 -5CC .768/.770 2 SMP Male to SMP Female Catcher's Mitt / P916 SMP Female Short / P930-1CC (.459) (.500) smp FEmale interface per mil-std-348 SMP Male Hermetic Thread-In / P761 (.135) smp FEmale interface per mil-std-348 (O .187) (O .135 MAX) R.P. (2X .045 WIDE X .050 DEEP) SCREWDRIVER SLOT smp male interface per mil-std-348 (.100) SMP Female to SMP Female Bullet - Short Body / P650 (.395) R.P. R.P. R.P. R.P. Figure 1 (O A) smp male CATHCHER'S MITT interface per mil-std-348 (.2535) .060 SMP Female Open / P931-1 10-48 UNS-2A THD MAJOR: O .1847/.1892 PITCH: O .1730/.1755 R.P. (.205) R.P. P/N INTERFACE (O A) -1CC LIMITED DETENT (.120) -2CC FULL DETENT (.116) (.500) smp FEmale interface per mil-std-348 2X (O .135 MAX) (.135) (.224) R.P. (O .135 MAX) EMI RING (O .187) R.P. OPEN/SHORTS/LOADS (.235) (.569) R.P. INTERFACE (O A) -1CCSF FULL DETENT .116 -2CCSF LIMITED DETENT .120 -3CCSF SMOOTH BORE .125 R.P. Figure 4 Figure 2 SMP Female to SMP Female Spring Loaded Bullet / P922 ANTI-ROCK RING BULLETS/ADAPTERS P/N figure P/N figure -1CC 1 -3CC 3 -2CC 2 -4CC 4 R.P. (.115) R.P. A (OPEN) A (CLOSED) B O .135 MAX (O .125) SMP Female to SMP Female Bullet / P617 SMP Female 50 Ohm Termination / P918 2X .135 NON-STANDARD smp FEmale interface* O.165 R.P. (.242) 2X O .135 MAX (.135) (.058) (.110) smp male CATHCHER'S MITT interface per mil-std-348 (10-32 UNF-2A) A (O .187) (O .135 MAX) R.P. EMI RING Figure 1 (.250 HEX) B (O .125) (O A) O .135 MAX (O .125) NON-STANDARD smp FEmale interface* R.P. smp male interface per 2X (.050) mil-std-348 R.P. A 2X .135 -1CC O.165 smp FEmale interface per mil-std-348 (2 PLC'S) 2X O .135 MAX Figure 2 R.P. A (OPEN) A (CLOSED) (.115) R.P. ANTI-ROCK RING P/N smp FEmale interface per mil-std-348 Figure 1 SMP Male Bulkhead to SMP Male Cathcer's Mitt / P912 smp FEmale interface per mil-std-348 (2 PLC'S) (.500) smp FEmale interface per mil-std-348 10 (.100) Mounting Hole Pattern LOCK WASHER P/N smp FEmale interface per mil-std-348 2X (O .135 MAX) (#10-32 UNF-2A THREAD) (.110) Figure 3 smp FEmale interface per mil-std-348 10-32 UNF-2B THREAD (O A) (O .015) (O .155) .125 LOCKNUT (.250 HEX) smp male interface per mil-std-348 (.110) (O .125) 2X (O .135 MAX) 2X (O .135 MAX) ANTI-ROCK RING R.P. smp FEmale interface per mil-std-348 (.254) EMI RING (.234) 2X Conductive O Ring R.P. smp FEmale interface per mil-std-348 Figure 2 (.110) * For use with smooth bore and catcher's mitt interfaces only R.P. P/N O-Ring (See table below) P/N Figure .116 -2CC 1 .510 .120 -3CC 2 .745 .125 -4CC 2 .660 INTERFACE (O A) -1CCSF FULL DETENT -2CCSF LIMITED DETENT -3CCSF SMOOTH BORE b o-ring spring pre-load spring rate .460 .115 not req'd 1.95 lbs 15.0 lbs/in .695 .115 not req'd 1.21 lbs 5.5 lbs/in .610 .135 req'd 1.21 lbs 5.5 lbs/in A (open) A (closed) 11 Ordering Information Configuration For Flexible Cables Cable Connectors For Semi-rigid & Semi-flex Cables Through hole Board Mount PCB Connectors Surface Mount Edge Mount Shrouds Part Number* Description P657 SMP (female) straight conn for flexible cables P600 SMP (female) rt angle conn for flexible cables, 18 GHz P601 SMP (female) rt angle conn for flexible cables, 26.5 GHz P663 SMP (male) straight panel mount conn for flexible cables P651 SMP (female) straight conn for semi-rigid and semi-flex cables P658 SMP (female) float mount conn for semi-rigid and semi-flex cables P652 SMP (female) rt. angle for semi-rigid/semi-flex cables, 12 GHz P655 SMP (female) rt. angle for semi-rigid/semi-flex cables, 26.5 GHz P659 SMP (female) rt. angle for semi-rigid/semi-flex cables, 18 GHz P662 SMP (male) bulkhead panel mount conn for semi-rigid cables P654 SMP (male) PCB mount to a straight termination P603 SMP (male) straight PCB mount - square body P646 SMP (male) rt. angle PCB mount P677 SMP shroud solder-in surface mount - short body P703 SMP (male) straight surface mount P797 SMP (male) straight to surface mount w/ posts P839 SMP (male) straight surface mount P606 SMP (male) straight edge mount connector P698 SMP (male) straight edge mount connector P670 SMP shroud - full detent straight 2-hole flange mount Flange Mount P672 SMP shroud - limited detent straight 2-hole flange mount P673 SMP shroud - smooth bore straight 2-hole flange mount Thread-in P676 SMP shroud - Thread-in Press-in Field-replaceable Hermetics Opens, Shorts, Loads P675 SMP press-in shroud P769 SMP press-in shroud - Short Body P836 SMP (male) 2-hole flange mount (accepts 0.012" pin) P680 SMP (male) hermetic shroud - Short Body P682 SMP (male) hermetic shroud P683 SMP (male) hermetic thread-in w/ mounting nut P761 SMP (male) hermetic thread-in P918 SMP (female) 50 Ohm termination P919 SMP (male) 50 Ohm termination P930-1CC+ P931-1 Bullets/Adapters Available for different flexible cables (see figure) 0.047" & 0.085" cable versions available (see figure) Different heights and detents available (see figure) Different heights available (see figure) Different detents available (see figure) Different flange dimensions available (see figure) Different detents available (see figure) Narrow flange version available (see figure) Different detents and pin styles available (see figure) SMP (female) Short SMP (female) Open + P617 SMP (female) to SMP (female) bullet P650 SMP (female) to SMP (female) bullet - short body P912 SMP (male) bulkhead to SMP (male) catcher's mitt P914 SMP (male) to SMP (female) adapter P916 SMP (male) to SMP (male) catcher's mitt P922 SMP (female) to SMP (female) spring loaded bullet * All parts have a suffix. Please refer to figures for more information Options + Different lengths available (see figure) Different detents available (see figure) See chart for available lengths These part numbers don't require an additional suffix Carlisle Interconnect Technologies / 12900 Alondra Blvd., Cerritos, CA 90703 Toll Free - 866.282.4708 / Fax - 562.494.0955 / CarlisleIT.com (c) Carlisle Interconnect Technologies, 2012. All trademarks, service marks and trade names are property of their respective holding companies. All Rights Reserved. Rev. 110812-3000