LimitlessTM Wireless Heavy-Duty Limit Switches WLS Series Datasheet LimitlessTM WLS Series Wireless Limit Switches The LimitlessTM product line combines the best of MICRO SWITCHTM heavy-duty limit switches with the latest commercial off-theshelf wireless technology. Wireless enabled limit switches can be used for position sensing and presence/absence detection for an endless number of applications. The LimitlessTM Series is especially beneficial for remote monitoring applications where wiring or wire maintenance is not physically possible or economically feasible. Combining this greater flexibility with proven harsh duty packaging can result in increased efficiencies and improved safety for machines, equipment, OEMs, and operators. What makes our wireless solutions better? *Enables control and/or notification from remote parts of applications/machinery/manufacturing plants, where wiring is too costly or not possible Ability to reconfigure and network multiple switches and interfaces with unique addresses that allows for adding, subtracting, or relocating LimitlessTM inputs easily Limit, eyelet pull, and non-contact switches along with single switch adapters allow for multiple wireless solutions to accommodate almost any application Reduced installation and maintenance costs eliminate the need to wire switches, install conduit, apply strain relief, mounting clips, connectors, junction boxes, etc. Eliminates issues with wire connection integrity and cable degradation on moving equipment INDUSTRY STANDARD VALUE * RELIABLE 2 sensing.honeywell.com Features and Benefits WIRELESS DESIGN Radio (license-free and global): WPAN 802.15.4, 2.4 GHz, point-to-point to deliver reliable, flexible, and secure wireless transmission. Offers control from remote locations where wiring is too costly or not practical (up to 305 m [1000 ft]). SEALED FOR HARSH ENVIRONMENTS The LimitlessTM Series features industrial and NEMA ratings, sealed zinc die-cast and powder coated housings with direct or remote mounted antenna options. Range of 305 m [1000 ft] REMOTE CONTROL AND MONITORING When paired with the LimitlessTM Monitor or Receiver, the WLS product line can enable users to monitor and/or control equipment, access points, and presence/ absence detection in remote locations where wiring is too costly or impractical to install. The WLS Series is designed to consume ultra-low power that helps to prolong battery life and has direct or remote mounted antenna options. Consumes ultra-low power to prolong battery life DESIGN OPTIONS The WLS Series offers a broad range of actuator styles. Side rotary, top plunger, eyelet pull, wobble stick, single switch adapter, and non-contact switch are all available within the product line. Actuator heads on most models can be rotated in 90 increments to allow for flexibility in applications. Multiple actuators can also be applied to any side rotary WLS LimitlessTM switch. CONFIGURABILITY All of the WLS Series LimitlessTM switches can be easily paired with a WPMM monitor or WDRR receiver providing multiple inputs that easily allow for adding, removing, or relocating LimitlessTM switches. This unique feature helps to eliminate issues with wire connection integrity on moving equipment. REDUCES COSTS With no wires, conduit, strain relief, connectors, or junction boxes to install or maintain, the WLS Series can reduce maintenance costs and inventory associated with maintaining and repairing equipment and facilities. sensing.honeywell.com 3 LimitlessTM WLS Series * Heavy-Duty Limit Switch Potential Applications with elements of control, notification, and/or setup * * * * * * * * * * * * Valve position Crane boom/jib/skew position Safety shower monitoring Lifts Material handling Presses CNC equipment Construction/Agricultural equipment Movable machinery Door position Hose attachment verification Remote or temporary equipment Table 1. WLS Series Specifications Characteristic Parameter Series name WLS Series Product type LimitlessTM Wireless Heavy-Duty Limit Switches Availability Operating force Actuator Lever type Housing material global, license-free bands see specification tables on page 6-7 side rotary, top plunger, top roller plunger, top adjustable plunger, side plunger, wobble stick rotary lever included with side rotary - other lever options available zinc die-cast head and body, phosphate treated and powder coated Housing type EN 50041 Radio WPAN 802.15.4; 2.4 GHz Antenna type direct or remote mount antenna options; omni directional Signal range* 305 meters [1000 ft] clear "line of sight"** between switch and receiver using a 2.2 dBi integral antenna Battery Sealing EMC Shock Vibration 3.5 Vdc Lithium Thionyl Chloride; 2/3 AA size (est. life = 1 year ) Manufactured by Uniwell, part number DEV-10-0009; Green Energy p/n ER14335M; Honeywell p/n WBT1 IP67; NEMA 1, 3, 4, 6, 6P, 12, 13 Latest applicable standards: EN 300 328, V1.7.1; EN 61326-1 (2006); EN 301 489-1, V1.8.1; EN 301 489-17, V2.1.1 IEC 60068-2-27; half sine, 10 g, 6 mS, 3 axis IEC 60068-2-6; 10-500Hz w/ 0,35 mm peak to peak, 58-500 Hz-5g Operating temperature -40 C to 85 C [-40 F to 185 F] Agency approvals and standards FCC 15.247: United States of America * IC RSS 210: Canada ETSI, CE mark: European countries * ACMA, C-TICK: Australia, New Zealand IDA: Singapore * COFETEL: Mexico WPC: India * ANATEL: Brazil SRRC: China * KCC: South Korea UNSPSC code 20142601 UNSPSC commodity 20142601 Sealed Industrial *Actual range may vary depending upon antennas, cables, and topography. ** "Line of sight" is not mandatory to fully utilize the LimitlessTM technology and thus testing in the actual application will determine suitability. 4 sensing.honeywell.com LimitlessTM Wireless Heavy-Duty Limit Switches PRODUCT NOMENCLATURE WLS 1 A 00 A A 1 3 A Switch type Gen Code RF Code Antenna type code* Country use code Operating head code Actuator code Modification code Specials WLS Series Wireless 1 Version 1 A 2.4 GHz; IEEE 802.15.4 00 No antenna; RP-SMA connector jack 01 2.2 dBi omni w/ switch mount; straight design 02 2.2 dBi omni w/ switch mount; tilt/swivel 03 3.0 dBi omni w/ remote adhesive mount 9.8 ft cable 04 5.5 dBi omni w/ remote mag. mount, tilt/swivel 5 ft cable 05 5.5 dBi omni w/ remote mag. mount, tilt/swivel 10ft cable 06 9.0 dBi omni w/ remote mag. mount, tilt/swivel 5 ft cable 07 9.0 dBi omni w/ remote mag. mount, tilt/swivel 10ft cable 08 8.0 dBi omni w/ remote bkt. mount, str. design 3 ft cable 09 8.0 dBi omni w/ remote bkt. mount, str. design 11 ft cable 10 2.2 dBi omni w/ remote bracket mount, straight design, 10 ft cable 11 0 dBi omni w/ switch mount; straight design A US, Canada, Mexico B All other approved countries1, 2, 3 1 Use with antenna type codes 00 - 03, 05, 10, 11 only; usage also allowed in Country Code A. Some countries require specific communication certifications. Contact Honeywell for existing certification information. A Side rotary, momentary See WLS actuator code table for details. Not applicable C Top plunger, plain 3 Head assembled with actuator to right side BT1 M12 Micro connector on top of head for external switch connection* D Top plunger, roller Actuators for operating head code "A" only, insert actuator code from table below. 4 Head assembled with actuator to left side BT2 M12 Micro connector on side of head for external switch connection* E Side plunger, momentary 5 Head assembled with actuator to mounting surface BT3 Cable grip on top of head for external switch connection* J Wobble stick 6 Roller perpendicular to mounting surface BT4 Cable grip on side of head for external switch connection* N Side rotary, maintained RS1 Reed switch target on top of head V Top plunger, adjustable RS2 Reed switch target on side of head PO1 Eyelet pull operating head (low force, 7 lb ref.) Eyelet pull operating head (low force, 18 lb ref.) 2 If LimitlessTM devices are used on machinery that may be shipped globally, use country code "B". 3 Not applicable PO2 * Connect to SPDT (form C) gold contact switch; 3.6 Vdc, 30 mA max. electrical load * See Table 11 for additional information. Table 2. WLS Series Actuator Code Table Code Catalog Material Listing Fixed 1.5 inch radius 1 LSZ51 Rollerless 1A LSZ51A Nylon 1B LSZ51B Steel 1C LSZ51C Nylon 1D LSZ51D Steel 1F LSZ51F Nylon 1G LSZ51G Nylon 1J LSZ51J Nylon 1L LSZ51L Ball bearing 1M LSZ51M Nylon 1N LSZ51N Steel 1P LSZ51P Nylon Adjustable 1.5 in to 3.5 in radius 2 LSZ52 Rollerless 2A LSZ52A Nylon 2B LSZ52B Steel 2C LSZ52C Nylon 2D LSZ52D Steel 2E LSZ52E Nylon 2J LSZ52J Nylon 2K LSZ52K Nylon 2L LSZ52L Ball bearing 2M LSZ52M Nylon 2N LSZ52N Nylon Yoke - 1.5 in radius 3A LSZ53A Nylon 3B LSZ53B Steel 3D LSZ53D Steel Roller Dia. (in) Roller Width (in) Roller Mounting n/a 0.75 0.75 0.75 0.75 1.0 1.5 1.0 0.75 0.75 0.75 0.75 n/a 0.25 0.25 0.25 0.25 0.520 0.25 0.520 0.25 1.25 1.25 0.50 n/a Front Front Back Back Front Front Back Back Back Front Front n/a 0.75 0.75 0.75 0.75 0.75 1.0 1.5 0.75 2.0 0.75 n/a 0.25 0.25 0.25 0.25 1.30 0.50 0.25 0.25 0.25 0.50 n/a Back Back Front Front Front Front Front Front Front Front 0.75 0.75 0.75 0.25 0.25 0.25 Front/Back Front/Back Front/Front Code Catalog Material Listing Yoke - 1.5 in radius, continued 3E LSZ53E Nylon 3M LSZ53M Nylon 3P LSZ53P Steel 3S LSZ53S Nylon Rod 4 LSZ54 Hub only 4M LSZ54M Alum, 5.5 in 4N LSZ54N Stainless, 13 in 4R LSZ54R Spring Wire, 12 in 4V LSZ54V Flex cable, 4.8 in Offset - 1.5 in radius 5 LSZ55 Rollerless 5A LSZ55A Nylon 5B LSZ55B Steel 5C LSZ55C Nylon 5D LSZ55D Steel 5E LSZ55E Nylon 5K LSZ55K Nylon Wobble stick 7A LSZ1JGA DelrinTM rod, 5.5 7M LSZ1JGM Spring wire, 13.0 7N LSZ1JGN Cable, 5.5 in. Short fixed - 1.3 in radius 9A LSZ59A Nylon 9B LSZ59B Steel 9C LSZ59C Nylon 9D LSZ59D Steel Roller Dia. (in) Roller Width (in) Roller Mounting 0.75 0.75 0.75 0.75 0.25 1.25 0.25 0.25 Back/Front Back/Front Back/Back Back/Back n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a n/a 0.75 0.75 0.75 0.75 0.75 1.5 n/a 0.25 0.25 0.25 0.25 0.50 0.25 n/a Back Back Front Front Front Front n/a n/a n/a n/a n/a n/a n/a n/a n/a 0.75 0.75 0.75 0.75 0.25 0.25 0.25 0.25 Front Front Back Back sensing.honeywell.com 5 WLS Series Table 3. WLS Series Order Guide Photo Part Number* Operating Head Actuator/Lever Antenna Type WLS1A01AA1A WLS1A02AA1A side rotary - momentary side rotary - momentary Fixed 33,1 mm [1.5 in] lever with nylon roller Fixed 33,1 mm [1.5 in] lever with nylon roller WLS1A04AA1A side rotary - momentary Fixed 33,1 mm [1.5 in] lever with nylon roller WLS1A11AA1A WLS1A01AA1B WLS1A02AA1B side rotary - momentary side rotary - momentary side rotary - momentary Fixed 33,1 mm [1.5 in] lever with nylon roller Fixed 33,1 mm [1.5 in] lever with steel roller Fixed 33,1 mm [1.5 in] lever with steel roller WLS1A04AA1B side rotary - momentary Fixed 33,1 mm [1.5 in] lever with steel roller 2.2 dBi omni, straight 2.2 dBi omni, tilt & swivel 5.5 dBi omni w/ remote magnetic mount, tilt & swivel, 5 ft cable 0.0 dBi omni, straight 2.2 dBi omni, straight 2.2 dBi omni, tilt & swivel 5.5 dBi omni w/ remote magnetic mount, tilt & swivel, 5 ft cable 0.0 dBi omni, straight WLS1A11AA1B side rotary - momentary Fixed 33,1 mm [1.5 in] lever with steel roller WLS1A001AA2A WLS1A02AA2A side rotary - momentary side rotary - momentary Adjustable 88,9 mm [3.5 in] lever with nylon roller Adjustable 88,9 mm [3.5 in] lever with nylon roller WLS1A04AA2A side rotary - momentary Adjustable 88,9 mm [3.5 in] lever with nylon roller WLS1A11AA2A WLS1A01AA2B WLS1A02AA2B side rotary - momentary side rotary - momentary side rotary - momentary Adjustable 88,9 mm [3.5 in] lever with nylon roller Adjustable 88,9 mm [3.5 in] lever with steel roller Adjustable 88,9 mm [3.5 in] lever with steel roller WLS1A04AA2B side rotary - momentary Adjustable 88,9 mm [3.5 in] lever with steel roller WLS1A11AA2B WLS1A01AA4M WLS1A02AA4M WLS1A01AA4N WLS1A02AA4N WLS1A11AA4N side rotary - momentary side rotary - momentary side rotary - momentary side rotary - momentary side rotary - momentary side rotary - momentary Adjustable 88,9 mm [3.5 in] lever with steel roller 140 mm [5.5 in] aluminum adjustable rod 140 mm [5.5 in] aluminum adjustable rod 330 mm [13.0 in] stainless steel rod 330 mm [13.0 in] stainless steel rod 330 mm [13.0 in] stainless steel rod 2.2 dBi omni, straight 2.2 dBi omni, tilt & swivel 5.5 dBi omni w/ remote magnetic mount, tilt & swivel, 5 ft cable 0.0 dBi omni, straight 2.2 dBi omni, straight 2.2 dBi omni, tilt & swivel 5.5 dBi omni w/ remote magnetic mount, tilt & swivel, 5 ft cable 0.0 dBi omni, straight 2.2 dBi omni, straight 2.2 dBi omni, tilt & swivel 2.2 dBi omni, straight 2.2 dBi omni, tilt & swivel 0.0 dBi omni, straight WLS1A02AB side pin plunger - 2.2 dBi omni, tilt & swivel WLS1A01AC top pin plunger - 2.2 dBi omni, straight WLS1A02AC top pin plunger - 2.2 dBi omni, tilt & swivel WLS1A04AC top pin plunger - 5.5 dBi omni w/ remote magnetic mount, tilt & swivel, 5 ft cable WLS1A11AC top pin plunger - 0.0 dBi omni, straight WLS1A01AD top roller plunger - 2.2 dBi omni, straight WLS1A02AD top roller plunger - 2.2 dBi omni, tilt & swivel WLS1A04AD top roller plunger - 5.5 dBi omni w/ remote magnetic mount, tilt & swivel, 5 ft cable WLS1A11AD top roller plunger - 0.0 dBi omni, straight WLS1A02AJ7M wobble - wire O2,0 mm [O0.075 in] x 330 mm [13.0 in] 2.2 dBi omni, tilt & swivel WLS1A11AJ7A wobble - thermoplastic rod O6,35 mm x 140 mm [O0.25 in x 5.5 in] 0.0 dBi omni, straight * To order products approved for use outside of the US/Canada/Mexico (A code), simply substitute the appropriate letter after reviewing the product approvals and antenna guidelines contained in this document. B = All other approved countries NOTE: Switches are also aviailable without antennas. Contact Honeywell Customer Service or an authorized distributor for details. 6 sensing.honeywell.com LimitlessTM Wireless Heavy-Duty Limit Switches Pretravel (PT) max. 17.5 17.5 60 60 Differential Travel (DT) max. 7 7 17.5 60 7 - - 0,45 Nm [4 in-lb] 17.5 17.5 17.5 60 60 60 7 7 7 - - - - - - 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb] 17.5 60 7 - - 0,45 Nm [4 in-lb] 17.5 60 7 - - 0,45 Nm [4 in-lb] 17.5 17.5 60 60 7 7 - - - - 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb] 17.5 60 7 - - 0,45 Nm [4 in-lb] 17.5 17.5 17.5 60 60 60 7 7 7 - - - - - - 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb] 17.5 60 7 - - 0,45 Nm [4 in-lb] 17.5 17.5 17.5 17.5 17.5 17.5 60 60 60 60 60 60 7 7 7 7 7 7 - - - - - - - - - - - - 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb] 2,54 mm [0.10 in] 4,83 mm [0.19 in] 1,14 mm [0.045 in] 33,02 mm 0,76 mm [1.30 in 0.03 in] - 26,69 N [6 lb] 1,78 mm [0.070 in] 4,83 mm [0.190 in] 0,41 mm [0.016 in] 1,78 mm [0.070 in] 4,83 mm [0.190 in] 0,41 mm [0.016 in] 1,78 mm [0.070 in] 4,83 mm [0.190 in] 0,41 mm [0.016 in] 1,78 mm [0.070 in] 4,83 mm [0.190 in] 0,41 mm [0.016 in] 1,78 mm [0.070 in] 4,83 mm [0.190 in] 0,41 mm [0.016 in] 1,78 mm [0.070 in] 4,83 mm [0.190 in] 0,41 mm [0.016 in] 1,78 mm [0.070 in] 4,83 mm [0.190 in] 0,41 mm [0.016 in] 1,78 mm [0.070 in] 4,83 mm [0.190 in] 0,41 mm [0.016 in] 45,85 mm 0,76 mm [1.805 in 0.03 in] 45,85 mm 0,76 mm [1.805 in 0.03 in] 45,85 mm 0,76 mm [1.805 in 0.03 in] 45,85 mm 0,76 mm [1.805 in 0.03 in] 55,88 mm 1,02 mm [2.20 in 0.04 in] 55,88 mm 1,02 mm [2.20 in 0.04 in] 55,88 mm 1,02 mm [2.20 in 0.04 in] 55,88 mm 1,02 mm [2.20 in 0.04 in] 47,63 mm ref. [1.875 in ref.] 47,63 mm ref. [1.875 in ref.] 47,63 mm ref. [1.875 in ref.] 47,63 mm ref. [1.875 in ref.] 57,66 mm ref. [2.270 in ref.] 57,66 mm ref. [2.270 in ref.] 57,66 mm ref. [2.270 in ref.] 57,66 mm ref. [2.270 in ref.] 101,6 mm [4.0 in] - - - - 142 g [5 oz] 25,4 mm [1.0 in] - - - - 284 g [10.0 oz] Overtravel (OT) min. Operating Point (OP) Free Position (FP) - - - - Oper. Force or Torque (max.) 0,45 Nm [4 in-lb] 0,45 Nm [4 in-lb] 17,79 N [4 lb] 17,79 N [4 lb] 17,79 N [4 lb] 17,79 N [4 lb] 17,79 N [4 lb] 17,79 N [4 lb] 17,79 N [4 lb] 17,79 N [4 lb] sensing.honeywell.com 7 WLS Series DIMENSIONS Figure 1. LimitlessTM WLS Series Side Rotary Figure 2. LimitlessTM WLS Series Top Adjustable Plunger Head 21,59 mm [0.85 in] 41,15 mm [1.62 in] 39,62 mm [1.56 in] 7,92 mm [0.312 in] 62,61 mm 0,76 mm [2.465 in 0.030 in] 14,68 mm [0.58 in] 25,4 mm [1.00 in] 36,45 mm [1.435 in] 19,05 mm [0.75 in] 59,309 mm max. [2.335 in] max. operating 52,959 mm min. point [2.085 in] min. operating point 106,78 mm [4.204 in] 59,54 mm [2.344 in] 70,33 mm [2.77 in] Mounting pads Mounting pads 2 X O 5,16 mm [O 0.203 in] mounting holes 2X 10-32 UNF 2B tapped from rear only 12,7 mm [0.50 in] min. depth 29,36 mm [1.156 in] 20,32 mm [0.80 in] 38,99 mm [1.535 in] 44,32 mm [1.745 in] Figure 3. LimitlessTM WLS Series Top Roller Plunger Figure 4. LimitlessTM WLS Series Top Plunger Head 21,59 mm [0.85 in] 41,15 mm [1.62 in] 39,62 mm [1.56 in] 21,59 mm [0.85 in] 9,48 mm [0.373 in] 4,75 mm [0.187 in] 14,68 mm [0.58 in] 55,88 mm [2.20 in] operating point O 12,7 mm [O 0.50 in] 17,53 mm [0.69 in] 28,56 mm [1.125 in] 45,85 mm [1.805 in] operating point 11,05 mm [0.435 in] 98,90 mm [3.894 in] 59,54 mm [2.344 in] Mounting pads 70,33 mm [2.77 in] 2 X O 5,16 mm [O 0.203 in] mounting holes 2X 10-32 UNF 2B tapped from rear only 12,7 mm [0.50 in] min. depth 16,51 mm [0.65 in] plug-in 29,36 mm [1.156 in] 20,32 mm [0.80 in] non plug-in 44,32 mm [1.745 in] 8 sensing.honeywell.com 38,99 mm [1.535 in] plug-in and non-plug in Mounting pads LimitlessTM Wireless Heavy-Duty Limit Switches Figure 5. LimitlessTM WLS Series Side Plunger 41,15 mm [1.62 in] 39,62 mm [1.56 in] 39,62 mm [1.56 in] 14,68 mm [0.58 in] 33,02 mm 0,76 mm [1.30 in 0.030 in] operating point 21,46 mm [0.845 in] 31,37 mm [1.235 in] 19,05 mm [0.75 in] O 9,4 mm [O 0.37 in] 101,6 mm [4.00 in] 59,54 mm [2.344 in] Mounting pads 70,33 mm [2.77 in] 2X 10-32 UNF 2B tapped from rear only 12,7 mm [0.50 in] min. depth 2 X O 5,16 mm [O 0.203 in] mounting holes 20,32 mm [0.80 in] 29,36 mm [1.156 in] 38,99 mm [1.535 in] O 1,905 mm [O 0.075 in] 44,32 mm [1.745 in] 21,59 mm [0.85 in] Figure 6. LimitlessTM WLS Series Wobbles O 6,35 mm [O 0.25 in] 14,68 mm [0.578 in] 21,59 mm [0.85 in] O 4,75 mm [O 0.187 in] 21,59 mm [0.85 in] 330,2 mm [13 in] 139,7 mm [5.5 in] 139,7 mm [5.5 in] 66,8 mm [2.63 in] 63,5 mm [2.5 in] 15,24 mm 26,29 mm [0.60 in] [1.035 in] Operating Head Code J Actuator Code 7A Operating Head Code J Actuator Code 7N Operating Head Code J Actuator Code 7M sensing.honeywell.com 9 WLS Series Table 4. WLS Series Available Levers Fixed lever LSZ51A - front mount nylon roller LSZ51B - front mount steel roller LSZ51C - back mount nylon roller LSZ51D - back mount steel roller One-way lever LSZ60A - nylon roller LSZ60B - steel roller LSZ54M aluminum rod 140 mm [5.5 in] Short fixed lever LSZ59A - front mount nylon roller LSZ59B - front mount steel roller LSZ59C - back mount nylon roller LSZ59D - back mount steel roller Adjustable lever LSZ52A - back mount nylon roller LSZ52B - back mount steel roller LSZ52C - front mount nylon roller LSZ52D - front mount steel roller LSZ52J adjustable lever, nylon roller 25,4 mm [1 in] LSZ52K adjustable lever, nylon roller 38,1 mm [1.5 in] Offset lever LSZ55A - back mount nylon roller LSZ55B - back mount steel roller LSZ55C - front mount nylon roller LSZ55D - front mount steel roller Spoke lever LSZ69CA - 152 mm [6 in] LSZ61 loop 152 mm [6 in] LSZ67CA** Plastic conveyor roller LSZ54N stainless steel rod 330 mm [13 in] ** May require orientation of switch and lever to enable gravity to help restore switch's free position. 10 sensing.honeywell.com Yoke lever LSZ53A - front/back mount nylon rollers LSZ53B - front/back mount steel rollers LSZ53D - front/front mount steel rollers LSZ54R spring wire 305 mm [12 in] LSZ68 rod w/ spring 305 mm [12 in] LimitlessTM WLS Series * Eyelet Pull Limit Switch Honeywell LimitlessTM WLS Series Heavy Duty Wireless Limit Switches with an eyelet pull operating head can be used to attach a rope, cable, or chain. It also can be used on cranes as an anti-two-block (A2B) switch. Potential Applications * Cranes: A2B (anti-two-block) switch * Rope pull: door activation switch * Cable pull: production stop applications (e.g., quality, broken tool, maintenance, out of parts); **not applicable to human safety-stop applications Table 5. WLS Series with Eyelet Pull Specifications Characteristic Operating characteristics Actuator Housing material Parameter operating force: 7 lb. approx. or 18 lb. approx. momentary eyelet pull operating head (pull eyelet in-line with shaft to prevent damage) zinc die-cast head and body, phosphate treated and powder coated Radio Communication agency approval WPAN 802.15.4; 2.4 GHz FCC 15.247: United States of America IC RSS 210: Canada ETSI, CE mark: European countries ACMA, C-TICK: Australia, New Zealand COFETEL: Mexico WPC: India ANATEL: Brazil SRRC: China KCC: South Korea Antenna type RP-SMA jack for direct or remote mount antenna options; omni-directional Signal range* In excess of 305 m [1000 ft] "line-of-sight"** communication between LimitlessTM switches and monitor Battery 3.6 Vdc Lithium Thionyl Chloride; 2/3 AA size (est. life = 1 year ) Manufactured by Uniwell, p/n DEV-10-0009; Green Energy, p/n ER14335M; Honeywell, p/n WBT1 Sealing IP67/IP68; NEMA 1, 4, 6, 6P, 12, 13 EMC Shock Vibration Operating temperature Latest applicable standards: EN 300 328, V1.7.1; EN 61326-1 (2006); EN 301 489-1, V1.8.1; EN 301 489-17, V2.1.1 IEC 60068-2-27; half sine, 10 g, 6 mS, 3 axis IEC 60068-2-6; 10-500Hz w/ 0,35 mm peak-to-peak, 58-500 Hz- 5g -40 C to 85 C [-40 F to 185 F] *Actual range may vary depending upon antennas, cables, and topography. ** "Line of sight" is not mandatory to fully utilize the LimitlessTM technology and thus testing in the actual application will determine suitability. sensing.honeywell.com 11 WLS Series Table 6. WLS Series with Eyelet Pull Order Guide Photo 12 Part Number Antenna Type WLS 1A11AQ-4P01 0 dBi omni WLS1A11AQ-P01 0 dBi omni WLS1A11AQ-P02 0 dBi omni WLS1A11BQ-4P01 0 dBi omni WLS1A11BQ-P01 0 dBi omni WLS1A11BQ-P02 0 dBi omni sensing.honeywell.com For Use In US, Canada, Mexico US, Canada, Mexico US, Canada, Mexico All other approved countries All other approved countries All other approved countries Full Travel max. 83,82 mm [3.30 in] 83,82 mm [3.30 in] 83,82 mm [3.30 in] 83,82 mm [3.30 in] 83,82 mm [3.30 in] 83,82 mm [3.30 in] Free Position 74,17 mm [2.92 in] 74,17 mm [2.92 in] 74,17 mm [2.92 in] 74,17 mm [2.92 in] 74,17 mm [2.92 in] 74,17 mm [2.92 in] Oper. Force max. 7 lb 7 lb 18 lb 7 lb 7 lb 18 lb Head assembly w/ actuator to left side w/ actuator towards nameplate w/ actuator towards nameplate w/ actuator to left side w/ actuator towards nameplate w/ actuator towards nameplate LimitlessTM Wireless Heavy-Duty Limit Switches Figure 7. LimitlessTM WLS Series with Eyelet Pull 83,82 mm [3.30 in] full travel 29,21 mm [1.15 in] 31,5 mm [1.24 in] 76,17 mm [2.92 in] free position 21,59 mm [0.85 in] 19,05 mm [0.75 in] Mounting pads 59,44 mm [2.34 in] 10,93 mm [0.43 in] 5,84 mm [0.23 in] 20,32 mm [0.80 in] 41,15 mm [1.62 in] 39,12 mm [1.54 in] 29,46 mm [1.16 in] P01 With Eyelet Pull Operating Head 44,45 mm [1.75 in] assembled per modification code 3 21,59 mm [0.85 in] 75,69 mm [2.98 in] 29,21 mm [1.15 in] 29,21 mm [1.15 in] 76,17 mm [2.92 in] free position 21,59 mm [0.85 in] 19,05 mm [0.75 in] 19,05 mm [0.75 in] Mounting pads P01 With Eyelet Pull Operating Head assembled per modification code 4 Mounting pads P01 With Eyelet Pull Operating Head assembled per modification code 5 sensing.honeywell.com 13 LimitlessTM WLS Series * Non-Contact Limit Switch Honeywell's LimitlessTM Wireless Non-Contact Switch provides non-contact presence/absence detection of a variety of different magnet styles and magnetic actuators installed on the end-users' product, machine, equipment, etc. The LimitlessTM WLS Non-Contact Switch's design features an industrial grade reed switch. Customers can choose how the reed switch is oriented within the switch's plastic head, i.e., either top- or side-sensing. Combining this greater flexibility with proven harsh-duty packaging can result in increased efficiencies and improved safety for industrial machines, equipment, OEMs, and operators. Potential Applications * Machine tools * Packaging machinery * Lifts * Ag/construction equipment * Industrial machines Table 7. WLS Series Non-Contact Switch Specifications Characteristic Operating characteristics Parameter operating point: 3,81 mm [0.15 in] min.; release point: 15,24 mm [0.60 in] max. with use of WMG1 magnet (included with WLS Series Non-Contact Switch) Sensing target Housing material top and side of head zinc body is phosphate treated and powder coated; 30 % glass-filled PBT plastic head Radio Communication agency approval WPAN 802.15.4; 2.4 GHz FCC 15.247: United States of America IC RSS 210: Canada ETSI, CE mark: European countries ACMA, C-TICK: Australia, New Zealand COFETEL: Mexico WPC: India ANATEL: Brazil SRRC: China KCC: South Korea Antenna type RP-SMA jack for direct or remote mount antenna options; omni-directional standard Signal range* In excess of 305 m [1000 ft] "line-of-sight"** communication between LimitlessTM switches and monitor Battery 3.6 Vdc Lithium Thionyl Chloride; 2/3 AA size (est. life = 1 year ) Manufactured by Uniwell, p/n DEV-10-0009; Green Energy, p/n ER14335M; Honeywell, p/n WBT1 Sealing EMC Shock Vibration Operating temperature IP67; NEMA 1, 4, 12, 13 Latest applicable standards: EN 300 328, V1.7.1; EN 61326-1 (2006); EN 301 489-1, V1.8.1; EN 301 489-17, V2.1.1 IEC 60068-2-27; half sine, 10 g, 6 mS, 3 axis IEC 60068-2-6; 10-500Hz w/ 0,35 mm peak-to-peak, 58-500 Hz- 5g -40 C to 85 C [-40 F to 185 F] *Actual range may vary depending upon antennas, cables, and topography. ** "Line of sight" is not mandatory to fully utilize the LimitlessTM technology and thus testing in the actual application will determine suitability. 14 sensing.honeywell.com LimitlessTM Wireless Heavy-Duty Limit Switches Table 8. WLS Series Non-Contact Switch Standard Listings Photo Part Number Description WLS1A00AQRS1 LimitlessTM WLS Series Non-Contact Switch with no antenna (RP-SMA connector jack) and a top sensing target, for use in US, Canada, and Mexico WLS1A00AQRS2 LimitlessTM WLS Series Non-Contact Switch with no antenna (RP-SMA connector jack) and a side sensing target, for use in US, Canada, and Mexico WLS1A11AQRS1 LimitlessTM WLS Series Non-Contact Switch with a 0 dBi antenna and a top sensing target, for use in US, Canada, and Mexico WLS1A11AQRS2 LimitlessTM WLS Series Non-Contact Switch with a 0 dBi antenna and a side sensing target, for use in US, Canada, and Mexico WLS1A00BQRS1 LimitlessTM WLS Series Non-Contact Switch with no antenna (RP-SMA connector jack) and a top sensing target, for use in all other approved countries WLS1A00BQRS2 LimitlessTM WLS Series Non-Contact Switch with no antenna (RP-SMA connector jack) and a side sensing target, for use in all other approved countries WLS1A11BQRS1 LimitlessTM WLS Series Non-Contact Switch with a 0 dBi antenna and a top sensing target, for use in all other approved countries WLS1A11BQRS2 LimitlessTM WLS Series Non-Contact Switch with a 0 dBi antenna and a side sensing target, for use in all other approved countries WMG1 LimitlessTM magnets for use with WLS Non-Contact Switch only: Operating point 3,81 mm [0.15 in] min.; Release point 15,24 mm [0.60 in] max. WMG2 LimitlessTM magnets for use with WLS Non-Contact Switch only: Operating point 11,43 mm [0.45 in] min.; Release point 54,4 mm [1.0 in] max. sensing.honeywell.com 15 WLS Series Figure 8. LimitlessTM WLS Series Non-Contact Switch 39,62 mm [1.56 in] 41,15 mm [1.62 in] 39,62 mm [1.56 in] 14,73 mm [0.58 in] 21,59 mm [0.85 in] Target centered on top face 21,59 mm [0.85 in] 52,07 mm [2.05 in] 52,07 mm [2.05 in] Mounting pads 122,43 mm [4.82 in] 59,54 mm [2.344 in] RS1 Mounting pads 70,33 mm [2.77 in] 52,07 mm [2.05 in] 2 X O 5,16 mm [O 0.203 in] mounting holes Target centered on side face 2X 10-32 UNF 2B tapped from rear only 12,7 mm [0.50 in] min. depth 29,36 mm [1.156 in] 20,32 mm [0.80 in] 41,66 mm [1.64 in] 38,99 mm [1.535 in] 44,32 mm [1.745 in] RS2 16 sensing.honeywell.com LimitlessTM WLS Series * Single Switch Adapter Honeywell's LimitlessTM Single Switch Adapter can convert almost any electromechanical switch with low-energy contacts (i.e., gold) into a wireless switch. A user-supplied electromechanical switch is simply wired to the WLS Series Single Switch Adapter via the internal or external connections to then become a wireless-enabled switch for use with the LimitlessTM WPMM or WDRR Series of monitors/receivers. The LimitlessTM Single Switch Adapter can be used in a variety of industrial wireless limit switch applications such as reed, contact, pressure, door actuator, etc. Honeywell offers numerous styles of low-energy contact switches. From sealed heavy-duty limits to small basics and subminiature switches, Honeywell can provide a low-energy solution that is compatible with the LimitlessTM Single Switch Adapter. Contact your Honeywell representative or distributor for details. Potential Applications * Agricultural equipment * Construction equipment * Door actuation (up/down) switch * Industrial machines * Lifts * Machine tools * Packaging machinery * Wireless warehouse operations * Wireless electo-mechanical switch operations (i.e. pressure switch, reed switch, basic switch, and/or limit switch) Table 9. WLS Series Single Switch Adapter Specifications Characteristic Electromechanical switch Electrical connections Housing material Parameter SPDT (Form C) switch with low-energy contacts (i.e., gold) capable of reliably controlling a 3.6 Vdc @ 30 mA electrical load to ensure proper operation 4-pin M12 micro-connector with three-pole, single keyway female receptacle Cable grip with internal screw connector Note: Maximum cable length 3 m [9.84 ft]. Cable diameter 8 mm [0.32 in] max./2,5 mm [0.10 in] min. zinc head is phosphate treated and powder coated; 30 % glass-filled PBT plastic head Radio Communication agency approval WPAN 802.15.4; 2.4 GHz FCC 15.247: United States of America * IC RSS 210: Canada ETSI, CE mark: European countries * ACMA, C-TICK: Australia, New Zealand COFETEL: Mexico * WPC: India ANATEL: Brazil * SRRC: China KCC: South Korea Antenna type RP-SMA jack for direct or remote mount antenna options; omni-directional standard Signal range* In excess of 305 m [1000 ft] "line-of-sight"** communication between LimitlessTM switches and monitor Battery 3.6 Vdc Lithium Thionyl Chloride; 2/3 AA size (est. life = 1 year ) Manufactured by Uniwell, p/n DEV-10-0009; Green Energy, p/n ER14335M; Honeywell, p/n WBT1 Sealing IP67; NEMA 1, 4, 12, 13 EMC Shock Vibration Operating temperature Latest applicable standards: EN 300 328, V1.7.1; EN 61326-1 (2006); EN 301 489-1, V1.8.1; EN 301 489-17, V2.1.1 IEC 60068-2-27; half sine, 10 g, 6 mS, 3 axis IEC 60068-2-6; 10-500Hz w/ 0,35 mm peak-to-peak, 58-500 Hz - 5g -40 C to 85 C [-40 F to 185 F] *Actual range may vary depending upon antennas, cables, and topography. ** "Line of sight" is not mandatory to fully utilize the LimitlessTM technology and thus testing in the actual application will determine suitability. sensing.honeywell.com 17 WLS Series Table 10. WLS Series Single Switch Adapter Standard Listings Photo 18 Part Number Description WLS1A00AQBT1 LimitlessTM WLS Series Single Switch Adapter, no antenna, internal battery with M12 microconnector on top of head for use in US, Canada, and Mexico WLS1A00BQBT1 LimitlessTM WLS Series Single Switch Adapter, no antenna, internal battery with M12 microconnector on top of head for use in all other approved countries WLS1A02AQBT1 LimitlessTM WLS Series Single Switch Adapter, 2.2 dBi tilt/swivel antenna, internal battery with M12 micro-connector on top of head for use in US, Canada, and Mexico WLS1A02BQBT1 LimitlessTM WLS Series Single Switch Adapter, 2.2 dBi tilt/swivel antenna, internal battery with M12 micro-connector on top of head for use in all other approved countries WLS1A11AQBT1 LimitlessTM WLS Series Single Switch Adapter, 0 dBi straight antenna, internal battery with M12 micro-connector on top of head for use in US, Canada, and Mexico WLS1A11BQBT1 LimitlessTM WLS Series Single Switch Adapter, 0 dBi straight antenna, internal battery with M12 micro-connector on top of head for use in all other approved countries WLS1A00AQBT2 LimitlessTM WLS Series Single Switch Adapter, no antenna, internal battery with M12 side micro-connector on top of head for use in US, Canada, and Mexico WLS1A02AQBT2 LimitlessTM WLS Series Single Switch Adapter, 2.2 dBi tilt/swivel antenna, internal battery with M12 side micro-connector on top of head for use in US, Canada, and Mexico WLS1A11AQBT2 LimitlessTM WLS Series Single Switch Adapter, 0 dBi straight antenna, internal battery with M12 side micro-connector on top of head for use in US, Canada, and Mexico WLS1A00AQBT3 LimitlessTM WLS Series Single Switch Adapter, no antenna, internal battery with cable grip on top of head for use in US, Canada, and Mexico WLS1A00BQBT3 LimitlessTM WLS Series Single Switch Adapter, no antenna, internal battery with cable grip on top of head for use in all other approved countries WLS1A02AQBT3 LimitlessTM WLS Series Single Switch Adapter, 2.2 dBi tilt/swivel antenna, internal battery with cable grip on top of head for use in US, Canada, and Mexico WLS1A02BQBT3 LimitlessTM WLS Series Single Switch Adapter, 2.2 dBi tilt/swivel antenna, internal battery with cable grip on top of head for use in all other approved countries WLS1A11AQBT3 LimitlessTM WLS Series Single Switch Adapter, 0 dBi straight antenna, internal battery with cable grip on top of head for use in US, Canada, and Mexico WLS1A11BQBT3 LimitlessTM WLS Series Single Switch Adapter, 0 dBi straight antenna, internal battery with cable grip on top of head for use in all other approved countries WLS1A00AQBT4 LimitlessTM WLS Series Single Switch Adapter, no antenna, internal battery with cable grip on side of head for use in US, Canada, and Mexico WLS1A02AQBT4 LimitlessTM WLS Series Single Switch Adapter, 2.2 dBi tilt/swivel antenna, internal battery with cable grip on side of head for use in all other approved countries WLS1A11AQBT4 LimitlessTM WLS Series Single Switch Adapter, 0 dBi straight antenna, internal battery with cable grip on side of head for use in US, Canada, and Mexico sensing.honeywell.com LimitlessTM Wireless Heavy-Duty Limit Switches Figure 9. LimitlessTM WLS Series Single Switch Adapter 21,59 mm [0.85 in] 19,05 mm [0.75 in] 39,62 mm [1.56 in] 49,15 mm [1.62 in] M12 connector 38,35 mm [1.51 in] O 19,05 mm [O 0.75 in] 14,73 mm [0.58 in] 21,59 mm [0.85 in] 14,73 mm [0.58 in] 25,4 mm [1.00 in] O 19,05 mm [O 0.75 in] 38,1 mm [1.50 in] 52,07 mm [2.05 in] BT1 M12 side connector BT2 122,43 mm [4.82 in] 59,54 mm [2.344 in] 70,36 mm [2.77 in] Mounting pads cord grip BT3 25,4 mm [1.00 in] 19,05 mm [0.75 in] 2X O13/64 mounting holes 38,1 mm [1.50 in] 2X 10-32 UNF-2B 0.50 in min. tapped from rear only 29,36 mm [1.156 in] 20,32 mm [0.80 in] 39,12 mm [1.54 in] cord grip BT4 44,45 mm [1.75 in] Not used Normally closed (NC) Not used Normally open (NO) Common (COM) Internal keyway Micro-Connector Pin Out (BT1 and BT2) Cable Grip Pin Out (BT3 and BT4) (View shown with head removed) sensing.honeywell.com 19 WLS Series Table 11. Antenna Listings/Order Code Specifications Antennas can be ordered with the LimitlessTM Wireless switches by inserting the Antenna Type Code into the part number as shown in the nomenclature. Also, switches can be ordered without antennas, by using the "00" Antenna Type Code in the part number. Antennas may also be ordered separately using the Part Numbers below. Part Number (if ordered separately) Antenna Type Code (if ordered with a wireless switch) Antenna Design Antenna Gain (dBi) Connector/ Mounting Dimensions WAN01RSP 01 straight 2.2 RP-SMA plug/direct mount O 9,91 mm x 112,78 mm L [O 0.39 in x 4.44 in L] WAN02RSP 02 tilt/swivel 2.2 RP-SMA plug/direct mount O 9,91 mm x 112,78 mm L [O 0.39 in x 4.44 in L] flat 3.0 RP-SMA plug/adhesive mount O 7,87 mm x 22,1 mm W x 4,57 mm D [O 0.31 in x 0.87 in W x 0.18 in D] 3 m [9 ft] cable WAN03RSP 03 WAN04RSP* 04** with a WAMM100RSP-005 base with 1,52 m [5 ft] of cable 05** with a WAMM100RSP-010 base with 3,05 m [10 ft] of cable tilt/swivel 5.5 RP-SMA plug/direct mount O 12,7 mm x 208,28 mm L [O 0.50 in x 8.20 in L] WAN05RSP* 06** with a WAMM100RSP-005 base with 1,52 m [5 ft] of cable 07** with a WAMM100RSP-010 base with 3,05 m [10 ft] of cable tilt/swivel 9.0 RP-SMA plug/direct mount O 12,7 mm x 384,05 mm L [O 0.50 in x 15.12 in L] WAN06RNJ* 08** with a WCA200RNPRSP-002 coax cable assembly 0,682 m [2 ft] 09** with a WCA200RNPRSP-010 coax cable assembly 3,05 m [10 ft] straight 8.0 RP-N jack/ bracket O 33,5 mm x 427,9 mm L [O 1.32 in x 16.85 in L] WAN07RSP 11 straight 0.0 RP-SMA plug/direct mount O 8,0 mm x 30 mm L [O 0.32 in x 1.18 in L] WAN09RSP - low profile mobile 3.0 RP-SMA plug/magnetic O 76,2 mm x 115 mm L [O 3.0 in x 4.54 in L] 4,57 m [15 ft] cable WAN10RSP - straight 5.0 RP-SMA plug/magnetic O 76,2 mm x 230,1 mm L [O 3.0 in x 9.06 in L] 1,52 m [5 ft] cable WAN11RSP* - low profile mobile dome 4.0 RP-SMA plug/thruhole screw O 39 mm x 42,4 mm L [O 1.54 in x 1.67 in L ] * Not allowed for use with Country Code "B" LimitlessTM products 20 sensing.honeywell.com ** See Tables 4 and 12 for accessory descriptions LimitlessTM Wireless Heavy-Duty Limit Switches ACCESSORIES Table 12. Cable and Coax Accessories Photo Part Number Description WCA200RNPRSP-002 LimitlessTM Series wireless cable assembly wth 200 Series cable, 2 ft length, reverse polarity N plug to reverse polarity SMA plug, use only with WAN06RNJ antenna WCA200RNPRSP-010 LimitlessTM Series wireless cable assembly wth 200 Series cable, 10 ft length, reverse polarity N plug to reverse polarity SMA plug, use only with WAN06RNJ antenna WCA200RNJRSP-002 LimitlessTM Series wireless cable assembly wth 200 Series cable, 2 ft length, reverse polarity SMA jack to reverse polarity SMA plug WCA200RNJRSP-005 LimitlessTM Series wireless cable assembly wth 200 Series cable, 5 ft length, reverse polarity SMA jack to reverse polarity SMA plug WCA200RNJRSP-010 LimitlessTM Series wireless cable assembly wth 200 Series cable, 10 ft length, reverse polarity SMA jack to reverse polarity SMA plug WCA200RNJRSP-015 LimitlessTM Series wireless cable assembly wth 200 Series cable, 15 ft length, reverse polarity SMA jack to reverse polarity SMA plug WCA200RNJRSP-020 LimitlessTM Series wireless cable assembly wth 200 Series cable, 20 ft length, reverse polarity SMA jack to reverse polarity SMA plug Table 13. Base Accessories Photo Part Number Description WAMM100RSP-005 Magnetic antenna base with 1,52 m [5 ft] of cable WAMM100RSP-010 Magnetic antenna base with 3,05 m [10 ft ] of cable WPB1 WPMM Wireless panel mount reciever mounting bracket WPR1 WPMM panel mount retainer sensing.honeywell.com 21 WLS Series This Honeywell datasheet supports the following LimitlessTM WLS Series Listings WLS1A00AA WLS1A00AA1A WLS1A00AA1B WLS1A00AA2A WLS1A00AA2B WLS1A00AA4M WLS1A00AA4N WLS1A00AC WLS1A00AD WLS1A00AE WLS1A00AJ7A WLS1A00AJ7M WLS1A00AJ7N WLS1A00AN WLS1A00AN1A WLS1A00AQ-4P01 WLS1A00AQBT1 WLS1A00AQBT2 WLS1A00AQBT3 WLS1A00AQBT4 WLS1A00AQRS1 WLS1A00AQRS2 WLS1A01AA1A WLS1A01AA1B WLS1A01AA1D WLS1A01AA2A WLS1A01AA2B WLS1A01AA2D WLS1A01AA4M WLS1A01AA4N WLS1A01AC WLS1A01AD WLS1A01AN WLS1A02AA1A WLS1A02AA1B WLS1A02AA2A WLS1A02AA2B WLS1A02AA4M WLS1A02AA4N WLS1A02AC WLS1A02AD WLS1A02AE WLS1A02AJ7M WLS1A02AN WLS1A02AN1A WLS1A02AQBT1 WLS1A02AQBT2 WLS1A02AQBT3 WLS1A02AQBT4 WLS1A02AQRS1 WLS1A02AQRS2 WLS1A11AA WLS1A11AA1A WLS1A11AA1D WLS1A11AA2A WLS1A11AA2A-3 WLS1A11AA2D WLS1A11AA2J WLS1A11AA2K WLS1A11AA4N WLS1A11AC WLS1A11AD WLS1A11AE WLS1A11AJ7A WLS1A11AN1A WLS1A11AQ-4P01 WLS1A11AQBT1 WLS1A11AQBT2 WLS1A11AQBT3 WLS1A11AQBT4 WLS1A11AQ-P01 WLS1A11AQ-P02 WLS1A11AQRS1 WLS1A11AQRS2 WLS1A11AV WLS1A00BA WLS1A00BA1A WLS1A00BA1B WLS1A00BA2A WLS1A00BA2B WLS1A00BA4M WLS1A00BC WLS1A00BD WLS1A00BE WLS1A00BN WLS1A00BQ-4P01 WLS1A00BQBT1 WLS1A00BQBT3 WLS1A00BQRS1 WLS1A00BQRS2 WLS1A01BA1A WLS1A01BA1B WLS1A01BA2A WLS1A01BA2B WLS1A01BC WLS1A01BD WLS1A01BN WLS1A02BA1A WLS1A02BA1B WLS1A02BA2A WLS1A02BA2B WLS1A02BA4M WLS1A02BC WLS1A02BD WLS1A02BE WLS1A02BN WLS1A02BQBT1 WLS1A02BQBT3 WLS1A02BQRS1 WLS1A02BQRS2 WLS1A11BA2K WLS1A11BD WLS1A11BE WLS1A11BQ-4P01 WLS1A11BQBT1 WLS1A11BQBT3 WLS1A11BQ-P01 WLS1A11BQ-P02 WLS1A11BQRS1 WLS1A11BQRS2 ADDITIONAL INFORMATION The following associated literature is available on the Honeywell web site at sensing.honeywell.com: * Product installation instructions * Product range guide * Product brochure * White Paper: LimitlessTM Switches Offer Unlimited Benefits 22 sensing.honeywell.com WARNING PERSONAL INJURY DO NOT USE these products as safety or emergency stop devices or in any other application where failure of the product could result in personal injury. Failure to comply with these instructions could result in death or serious injury. WARNING MISUSE OF DOCUMENTATION * * The information presented in this product sheet is for reference only. Do not use this document as a product installation guide. Complete installation, operation, and maintenance information is provided in the instructions supplied with each product. Failure to comply with these instructions could result in death or serious injury. WARRANTY/REMEDY Honeywell warrants goods of its manufacture as being free of defective materials and faulty workmanship. Honeywell's standard product warranty applies unless agreed to otherwise by Honeywell in writing; please refer to your order acknowledgement or consult your local sales office for specific warranty details. If warranted goods are returned to Honeywell during the period of coverage, Honeywell will repair or replace, at its option, without charge those items it finds defective. The foregoing is buyer's sole remedy and is in lieu of all other warranties, expressed or implied, including those of merchantability and fitness for a particular purpose. In no event shall Honeywell be liable for consequential, special, or indirect damages. While we provide application assistance personally, through our literature and the Honeywell website, it is up to the customer to determine the suitability of the product in the application. Specifications may change without notice. The information we supply is believed to be accurate and reliable as of this printing. However, we assume no responsibility for its use. Find out more Honeywell serves its customers through a worldwide network of sales offices, representatives and distributors. For application assistance, current specifications, pricing or name of the nearest Authorized Distributor, contact your local sales office. To learn more about Honeywell's sensing and control products, call +1-815-235-6847 or 1-800-537-6945, visit sensing.honeywell.com, or e-mail inquiries to info.sc@honeywell.com Sensing and Control Honeywell 1985 Douglas Drive North Golden Valley, MN 55422 honeywell.com 002332-4-EN IL50 GLO February 2015 Copyright (c) 2015 Honeywell International Inc. All rights reserved.