SY100EL16VZITR - Micrel - Datasheet.Directory

1

SY10EL16V

SY100EL16V

MicreL, Inc.

M9999-061306

hbwhelp@micrel.com or (408) 955-1690

DESCRIPTION

FEATURES

5V/3.3V DIFFERENTIAL

RECEIVER

SY10EL16V

SY100EL16V

■3.3V and 5V power supply options

■250ps propagation delay

■High bandwidth output transitions

■Internal 75KΩ input pull-down resistors

■Replaces SY10/100EL16

■Improved output waveform characteristics

■Available in 8-pin (3××

××

×3mm) MSOP and SOIC package

The SY10/100EL16V are differential receivers. The

devices are functionally equivalent to the E116 devices,

with higher performance capabilities. With output

transition times significantly faster than the E116, the

EL16V is ideally suited for interfacing with high-frequency

sources.

The EL16V provides a VBB output for either single-

ended use or as a DC bias for AC coupling to the device.

The VBB pin should be used only as a bias for the EL16V

as its current sink/source capability is limited. Whenever

used, the VBB pin should be bypassed to ground via a

0.01µF capacitor.

Under open input conditions (pulled to VEE), internal

input clamps will force the Q output LOW.

PIN NAMES

Pin Function

DData Inputs

QData Outputs

VBB Reference Voltage Output

Rev.: I Amendment: /1

Issue Date:

June 2006

2

SY10EL16V

SY100EL16V

Micrel, Inc.

M9999-061306

hbwhelp@micrel.com or (408) 955-1690

PACKAGE/ORDERING INFORMATION

Ordering Information(1)

Package Operating Package Lead

Part Number Type Range Marking Finish

SY10EL16VKC K8-1 Commercial HEL16V Sn-Pb

SY10EL16VKCTR(2) K8-1 Commercial HEL16V Sn-Pb

SY100EL16VKC K8-1 Commercial XEL16V Sn-Pb

SY100EL16VKCTR(2) K8-1 Commercial XEL16V Sn-Pb

SY10EL16VZC Z8-1 Commercial HEL16V Sn-Pb

SY10EL16VZCTR(2) Z8-1 Commercial XEL16V Sn-Pb

SY100EL16VZC Z8-1 Commercial HEL16V Sn-Pb

SY100EL16VZCTR(2) Z8-1 Commercial XEL16V Sn-Pb

SY10EL16VKI K8-1 Industrial HEL16V Sn-Pb

SY10EL16VKITR(2) K8-1 Industrial HEL16V Sn-Pb

SY100EL16VKI K8-1 Industrial XEL16V Sn-Pb

SY100EL16VKITR(2) K8-1 Industrial XEL16V Sn-Pb

SY10EL16VZI Z8-1 Industrial HEL16V Sn-Pb

SY10EL16VZITR(2) Z8-1 Industrial XEL16V Sn-Pb

SY100EL16VZI Z8-1 Industrial HEL16V Sn-Pb

SY100EL16VZITR(2) Z8-1 Industrial XEL16V Sn-Pb

SY10EL16VKG(3) K8-1 Industrial H16V with Pb-Free

Pb-Free bar-line indicator NiPdAu

SY10EL16VKGTR(2, 3) K8-1 Industrial H16V with Pb-Free

Pb-Free bar-line indicator NiPdAu

SY100EL16VKG(3) K8-1 Industrial X16V with Pb-Free

Pb-Free bar-line indicator NiPdAu

SY100EL16VKGTR(2, 3) K8-1 Industrial X16V with Pb-Free

Pb-Free bar-line indicator NiPdAu

SY10EL16VZG(3) Z8-1 Industrial HEL16V with Pb-Free

Pb-Free bar-line indicator NiPdAu

SY10EL16VZGTR(2, 3) Z8-1 Industrial HEL16V with Pb-Free

Pb-Free bar-line indicator NiPdAu

SY100EL16VZG(2) Z8-1 Industrial XEL16V with Pb-Free

Pb-Free bar-line indicator NiPdAu

SY100EL16VZGTR(2, 3) Z8-1 Industrial XEL16V with Pb-Free

Pb-Free bar-line indicator NiPdAu

Notes:

1. Contact factory for die availability. Dice are guaranteed at TA = 25°C, DC Electricals only.

2. Tape and Reel.

3. Pb-Free package is recommended for new designs.

8-Pin MSOP (K8-1)

8-Pin SOIC (Z8-1)

Process: Bipolar

ESD Rating: Per Mil Std. 883 Human Body Model,

>2.0kV (all pins).

PRODUCT/PROCESS INFORMATION

3

SY10EL16V

SY100EL16V

MicreL, Inc.

M9999-061306

hbwhelp@micrel.com or (408) 955-1690

Symbol Rating Value Unit

VCC Power Supply Voltage (VEE = 0) +6.0 to 0 V

VEE Power Supply Voltage (VCC = 0) –6.0 to 0 V

VIN Input Voltage (VCC = 0V, VIN not more negative than VEE)–6.0 to 0 V

Input Voltage (VEE = 0V, VIN not more positive than VCC)+6.0 to 0 V

IOUT Output Current –Continuous 50 mA

–Surge 100

TLEAD Lead Temperature Range (soldering, 20sec.) +260 °C

TAOperating Temperature Range –40 to +85 °C

Tstore Storage Temperature Range –65 to +150 °C

θJA Thermal Resistance (Junction-to-Ambient) –Still Air 160 °C/W

–500lfpm 109 °C/W

θJC Thermal Resistance (Junction-to-Case) 39 °C/W

ESD Mil Std. 883 Human Body Model, All Pins >2.0k V

Note 1. Permanent device damage may occur if absolute maximum ratings are exceeded. This is a stress rating only and functional operation is not

implied at conditions other than those detailed in the operational sections of this data sheet. Exposure to absolute maximum ratlng conditions

for extended periods may affect device reliability.

ABSOLUTE MAXIMUM RATINGS(1)

Note 1. Parametric values specified at: 10/100EL16V Series: -3.0V to -5.5V.

Note 2. specification for packaged product only.

DC ELECTRICAL CHARACTERISTICS(1, 2)

TA = –40°CTA = 0°CTA = +25°CTA = +85°C

Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit

IEE Power Supply Current mA

10EL — 18 22 9 18 22 9 18 22 9 18 22

100EL — 18 22 9 18 22 9 18 22 9 21 26

VBB Output Reference V

Voltage 10EL –1.43 — –1.30 –1.38 — –1.27 –1.35 — –1.25 –1.31 — –1.19

100EL –1.38 — –1.26 –1.38 — –1.26 –1.38 — –1.26 –1.38 — –1.26

IIH Input HIGH Current — — 150 — — 150 — — 150 — — 150 µA

VEE = VEE (Min.) to VEE (Max.); VCC = GND

4

SY10EL16V

SY100EL16V

Micrel, Inc.

M9999-061306

hbwhelp@micrel.com or (408) 955-1690

TA = –40°CTA = 0°CTA = +25°CTA = +85°C

Symbol Parameter Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Min. Typ. Max. Unit

tPD Propagation Delay to ps

Output D (Diff) 125 250 375 175 250 325 175 250 325 205 280 355

D (SE) 75 250 425 125 250 375 125 250 375 155 280 405

tskew Duty Cycle Skew(2) (Diff) — 5 — — 5 20 — 5 20 — 5 20 ps

VPP Minimum Input Swing(3) 150 — — 150 — — 150 — — 150 — — mV

VCMR Common Mode Range(4) –1.3 — –0.4 –1.4 — –0.4 –1.4 — –0.4 –1.4 — –0.4 V

trOutput Rise/Fall Times Q 100 225 350 100 225 350 100 225 350 100 225 350 ps

tf(20% to 80%)

Note 1. Parametric values specified at: 10/100EL16V Series: -3.0V to -5.5V.

Note 2. Duty cycle skew is the difference between a tPLH and tPHL propagation delay through a device.

Note 3. Minimum input swing for which AC parameters are guaranteed. The device has a DC gain of ≈40.

Note 4. The CMR range is referenced to the most positive side of the differential input signal. Normal operation is obtained if the HIGH level falls

within the specified range and the peak-to-peak voltage lies between VPP min. and 1V. The lower end of the CMR range varies 1:1 with VEE.

The numbers in the spec table assume a nominal VEE = –3.3V. Note for PECL operation, the VCMR (min) will be fixed at 3.3V – |VCMR (min)|.

Note 5. Specification for packaged product only.

VEE = VEE (Min.) to VEE (Max.); VCC = GND

AC ELECTRICAL CHARACTERISTICS(1, 5)

5

SY10EL16V

SY100EL16V

MicreL, Inc.

M9999-061306

hbwhelp@micrel.com or (408) 955-1690

8-PIN MSOP (K8-1)

Rev. 01

Package Notes:

Note 1. Package meets Level 1 moisture sensitivity.

6

SY10EL16V

SY100EL16V

Micrel, Inc.

M9999-061306

hbwhelp@micrel.com or (408) 955-1690

8-PIN SOIC(Z8-1)

Rev. 03

MICREL, INC. 2180 FORTUNE DRIVE SAN JOSE, CA 95131 USA

TEL + 1 (408) 944-0800 FAX + 1 (408) 474-1000 WEB http://www.micrel.com

The information furnished by Micrel in this datasheet is believed to be accurate and reliable. However, no responsibility is assumed by Micrel for its use.

Micrel reserves the right to change circuitry and specifications at any time without notification to the customer.

Micrel Products are not designed or authorized for use as components in life support appliances, devices or systems where malfunction of a product can

reasonably be expected to result in personal injury. Life support devices or systems are devices or systems that (a) are intended for surgical implant into

the body or (b) support or sustain life, and whose failure to perform can be reasonably expected to result in a significant injury to the user. A Purchaser’s

use or sale of Micrel Products for use in life support appliances, devices or systems is at Purchaser’s own risk and Purchaser agrees to fully indemnify

Micrel for any damages resulting from such use or sale.

© 2006 Micrel, Incorporated.

Package Notes:

Note 1. Package meets Level 1 moisture sensitivity.