Double Density D - .075" Contact Spacing The Double Density D is a rectangular connector in the popular D Subminiature shell configuratoin featuring double the contact density in the same insert area. The Double Density D connector can thus accommodate up to 100 contacts instead of 50. This double contact density is achieved by using field-proven, highly reliable CentipinTM/CentisocketTM contacts on .075 (1.91) centers, in the positive contact alignment design. In this design contact positions are reversed; the flexible CentipinTM contacts are recessed in the insulator and the more rugged CentisocketTM contacts are exposed. This reversal of positions, and the chamfered-entry of the sockets, assures positive mating even under servere misalignment conditions. The contacts are retained in the monobloc insulator by a resilient internal shoulder that snaps into a locking groove in the contact. The chamfered front of the contact will 2D not damage the internal shoulder in the insulartor. Contacts are crimp removable type. The Double Density D connector is available in the five popular shell and insert sizes accommodating up to 100 contacts. These connnectors mate exclusively with other Double Density D connectors. A wide range of accessories can be used, including junction shells, potting cups, switching shells, guide pin plates, and dust caps. 1. STANDARD D HARDWAREIncluding full range of D Subminiature accessories 1 2. ONE PIECE TYPE INSULATORglass-filled nylon material 3. CONTACT RETENTIONthermoplastic internal shoulder snaps into a locking groove in the contact. 2 Retention Force: 8 lbs. min. initially, 4 lbs. min. after 10 cycle. 3 4. TWIST PIN CONTACTSseven outer wiping surfaces assure electrical continuity even under severe shock and vibration 4 5. POSTIVE CONTACT ALIGNMENTflexible pin is recessed in insulator cavity and rugged socket is exposed 6. GUIDE-IN KEYS AND KEYWAYS- 5 assure alignment during mating and prevent scooping 6 How to Order 2D E 2D A F 19 S 31 P BR **** SERIES SHELL SIZE FLOAT MOUNTS CONTACT ARRANGEMENT CONTACT TYPE TERMINATION MODIFICATION NOTE: Connectors may be ordered less contacts by adding the mod callout "FO" at enc of number. Contacts are then supplied in bulk form. for type of contacts and installation/assembly tools refer to page 13. SERIES 2D - Double Density D - ITT Cannon prefix CONTACT ARRANGEMENT SHELL SIZE E, A, B, C and D CONTACT TYPE* 19, 31, 52, 79 and 100 MODIFICATION F171 - Jackpost assembly F172 - Standard jackscrew F173 - Low profile jackscrew For other modifications consult factory P - Pin S - Socket FLOAT MOUNTS TERMINATION BR - 90 PCB mounting (For BR Series use "P" to designate jackpost) Omit if not required * Accommodates AWG #26 thru #22 Performance and Material Specifications WEIGHT Part Number by shell size Weight (in gr.) Weight (in oz.) Less With Contacts Less With Contacts MATERIALS AND FINISHES MECHANICAL FEATURES *Shell Sizes - Five shell sizes: E, A, B, C, and D Coupling - Friction or jackscrew Polarization - Keystone-shaped shells Contact Spacing - .075 (1.91) Contact Termination - Crimp snap-in - Steel, cadmium plated with yellow chromate supplementary coating - Stainless steel 2DE19P 4.05 5.02 .142 .177 Mounting Hardware 2DE19S 3.75 5.17 .133 .182 and Float Mounts 2DA31P 5.20 6.78 .183 .239 Insulator - Glass-filled nylon 2DA31S 4.90 7.22 .173 .255 Contacts - Copper alloy, gold plate 2DB52P 8.75 11.40 .308 .402 Alternate finish, - A106 Gold over brass 2DB52S 7.15 11.05 .252 .390 2DC79P 11.70 15.73 .413 .555 2DC79S 9.70 15.62 .342 .551 2DD100P 12.85 17.95 .453 .633 2DD100S 10.95 18.45 .386 .651 Modification Code A156 Gold over brass A197 Tin/Lead over steel *Brass non-magnetic also available Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 278 Double Density D - .075" Contact Spacing 2D Standard Shell M A L B K 10 (TYP) G J + D + E + C V H TWO MTG. HOLES .123 +_ .005 (3.12 +_ 0.13) T + .020 (0.51) - .000 (0.00) Part Number by Shell Size T + Part Number by Shell Size T + .020 (0.51) - .000 (0.00) 2DE19P .250 (6.35) 2DB52S .236 (5.99) 2DE19S .250 (6.35) 2DC79P .236 (5.99) 2DA31P .250 (6.35) 2DC79S .236 (5.99) 2DA31S .250 (6.35) 2DD100P .236 (5.99) 2DB52P .236 (5.99) 2DD100S .236 (5.99) .856(21.74)MAX. Float Mount A K B 10 (TYP) + + D + E .032 (.812) TOTAL DIAMETRAL FLOAT C Part Number A by Shell Size +_ .015 (0.38) G J N + H M TWO MTG. HOLES .0885 +_ .0025 (2.248 +_ 0.064) V B C D E G H J K L M N +_ .010 (0.25) +_ .010 (0.25) +_ .010 (0.25) +_ .015 (0.38) +_ .010 (0.25) +_ .010 (0.25) +_ .010 (0.25) +_ .010 (0.25) +_ .010 (0.25) +_ .010 (0.25) +_ .010 (0.25) V Max. 2DE19P 1.213 (30.81) .697 (17.70) .984 (24.99) .360 (9.14) .494 (12.55) .759 (19.28) .422 (10.72) .036 (.914) .236 (5.99) .055 (1.40) .422 (10.72) .120 (3.05) .555 (14.10) 2DE19S 1.213 (30.81) .640 (16.26) .984 (24.99) .308 (7.82) .494 (12.55) .759 (19.28) .422 (10.72) .032 (213) .243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10) 2DA31P 1.541 (39.14) 1.025 (26.03) 1.312 (33.32) .360 (9.14) .494 (12.55) 1.083 (27.51) .422 (10.72) .036 (.914) .236 (5.99) .055 (1.40) .422 (10.72) .120 (3.05) .555 (14.10) 2DA31S 1.541 (39.14) .968 (24.58) 1.312 (33.32) .308 (7.82) .494 (12.55) 1.083 (27.51) .422 (10.72) .032 (213) .243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10) 2DB52P 2.088 (53.03) 1.583 (40.21) 1.852 (47.04) .378 (9.60) .494 (12.55) 1.625 (41.27) .422 (10.72) .036 (.914) .231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28) .555 (14.10) 2DB52S 2.088 (53.03) 1.508 (38.30) 1.852 (47.04) .308 (7.82) .494 (12.55) 1.625 (41.27) .422 (10.72) .032 (213) .243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10) 2DC79P 2.729 (69.31) 2.231 (56.67) 2.500 (63.50) .378 (9.60) .494 (12.55) 2.272 (57.71) .422 (10.72) .036 (.914) .231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28) .555 (14.10) 2DC79S 2.729 (69.31) 2.156 (54.76) 2.500 (63.50) .308 (7.82) .494 (12.55) 2.272 (57.71) .422 (10.72) .032 (213) .243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10) 2DD100P 2.635 (66.92) 2.127 (54.02) 2.406 (61.11) .484 (12.29) .605 (15.37) 2.178 (55.32) .534 (13.56) .036 (.914) .231 (5.87) .055 (1.40) .426 (10.82) .129 (3.28) .555 (14.10) 2DD100S 2.635 (66.92) 2.062 (52.37) 2.406 (61.11) .420 (10.67) .605 (15.37) 2.178 (55.32) .534 (13.56) .032 (213) .243 (6.17) .047 (1.19) .429 (10.90) .120 (3.05) .555 (14.10) For shell with float mounts, add letter F after shell size, e.g., 2DEF19P. Jackscrew/Jackpost Asembly .180 +_ .025 Grip (4.57 +_ 0.64) Length #4-40 UNC-2A THREAD .025 (0.64) MAX. .620 +_ .010 (15.75 +_ 0.25) #4-40 UNC-2B THREAD #4-40 UNC-2A THREAD .025 (0.64) MAX. .180 +_ .025 Grip (4.57 +_ 0.64) Length .230 (5.84) MAX. .233 (5.92) .223 (5.66) .325 +_ .015 (8.26 +_ 0.38) #4-40 UNC-2A THREAD Standard (F172) Jackscrew (factory installed) Low Profile (F173) Jackscrew (factory installed) Jackpost (F171) Front Panel Connector Mounting Only Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 279 Double Density D - .075" Contact Spacing 2D 90 PCB Mounting - 4 Row .0375 (0.94) REF. .125 (3.18) .115 (2.92) DIA. TYP. .130 (3.30) MIN. .075 (1.90) REF. + + + + + + + + + + + + + + + + ++ + + + + + + + + + + + + + + + + + + + + .790 (20.07) MAX. + + + + + ++ + + + + + + + ++ + + + + + + + + + + + + + + + + ++ + + .100 (2.54) REF. .253 (6.43) .233 (5.92) .100 (2.54) REF. .200 (5.08) REF. .510 (12.95) .490 (12.45) B B .075 (1.90) CAV #1 .065 (1.65) + .620 (15.75) .590 (14.99) + #4-40 UNC-2B THREAD (2 PLACES) CAV #100 A A LEAD #100 LEAD #1 Part Number by Shell Size A + _ .015 (0.38) B + _ .010 (0.25) C Max. 2DD100SBRP 2.635 (66.93) 2.406 (61.11) .790 (20.07) Contact Arrangements - Page 281 Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 280 Double Density D - .075" Contact Spacing 2D Contact Arrangements All views are pin front face. Use reverse order for socket side. 1 7 14 6 13 19 1 11 22 10 21 31 DE 19 Contacts 1 18 36 17 35 52 DA 31 Contacts 1 27 54 DB 52 Contacts 1 27 52 76 26 53 79 26 51 75 100 DC 79 Contacts DD 100 Contacts Cavity identification numbers are shown for reference only and do not appear on insulator front face. However they do appear on rear of insulator. 90 PCB Mounting - 3 Row .0375 (0.95) REF. .148 (3.76) MIN. .075 (.190) REF. .125 (3.18) .115 (2.92) DIA. TYP. .130 (3.30) 2x .100 (2.54) .253 (6.43) .233 (5.92) .690 (17.53) MAX. .100 (2.54) REF. .100 (2.54) REF. .510 (12.95) .490 (12.45) B B CAV. #1 .075 (1.90) .065 (1.65) .510 (12.95) .480 (12.18) #4-40 UNC-2B THREAD (2 PLACES) LAST CAV. A A PCB Termination Leads (all contact arrangements) .024 (6.10) to .028 (7.11). LAST LEAD Suggested finished PC hole Size .033 (8.38) + _ .003 (0.08) LEAD #1 Part Number by Shell Size A + _ .015 (0.38) B + _ .010 (0.25) C Max. 2DE19SBRP 2DA31SBRP 1.215 (30.86) .984 (24.99) .690 (17.53) 1.540 (39.12) 1.312 (33.32) .690 (17.53) 2DB52SBRP 2.090 (53.09) 1.852 (47.04) .690 (17.53) 2DC79SBRP 2.730 (69.34) 2.500 (63.50) .690 (17.53) Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 281 Double Density D - .075" Contact Spacing 2D Panel Cutouts A 100' TYP. B G F E H FULL R K TYP R .032 (0.81) R MAX. TYP D C G D C Conn. 2DE 2DA 2DB 2DC 2DD Mtg. Method A + _ .005 (0.13) B + _ .005 (0.13) C + _ .005 (0.13) D + _ .005 (0.13) E + _ .005 (0.13) F + _ .005 (0.13) G + _ .002 (0.05) H + _ .002 (0.05) K + _ .002 (0.05) Front .874 (22.20) .437 (11.10) .984 (24.99) .492 (12.50) .513 (13.03) .257 (6.53) .120 (3.05) .060 (1.52) .083 (2.11) Rear .806 (20.47) .403 (10.24) .984 (24.99) .492 (12.50) .449 (11.40) .225 (5.71) .120 (3.05) .060 (1.52) .132 (3.35) Front 1.202 (30.53) .601 (15.26) 1.312 (33.32) .656 (16.66) .513 (13.03) .257 (6.53) .120 (3.05) .060 (1.52) .083 (2.11) Rear 1.134 (28.80) .567 (14.40) 1.312 (33.32) .656 (16.66) .449 (11.40) .225 (5.71) .120 (3.05) .060 (1.52) .132 (3.35) Front 1.743 (44.27) .872 (22.15) 1.852 (47.04) .926 (23.52) .513 (13.03) .257 (6.53) .120 (3.05) .060 (1.52) .083 (2.11) Rear 1.674 (42.52) .837 (21.26) 1.852 (47.04) .926 (23.52) .449 (11.40) .225 (5.71) .120 (3.05) .060 (1.52) .132 (3.35) Front 2.391 (60.73) 1.196 (30.38) 2.500 (63.50) 1.250 (31.75) .513 (13.03) .257 (6.53) .120 (3.05) .060 (1.52) .083 (2.11) Rear 2.326 (59.08) 1.163 (29.54) 2.500 (63.50) 1.250 (31.75) .449 (11.40) .225 (5.71) .120 (3.05) .060 (1.52) .132 (3.35) Front 2.297 (58.34) 1.149 (29.18) 2.406 (61.11) 1.203 (30.56) .623 (15.82) .312 (7.92) .120 (3.05) .060 (1.52) .083 (2.11) Rear 2.218 (56.34) 1.109 (28.17) 2.406 (61.11) 1.203 (30.56) .555 (14.10) .278 (7.06) .120 (3.05) .060 (1.52) .132 (3.35) For contact part numbers, termination tooling and assembly see pages 288-290. Panel Mounting 3/32 THICKNESS (REF.) RECOMMENDED Front Mounting Standard RIVET THICKNESS Front Mounting Float RIVET THICKNESS Rear Mounting Standard Rear Mounting Float Dimensions are shown in inches (millimeters). Dimensions subject to change. www.ittcannon.com 282