ADNS-6170-002 Wide Trim Lens Data Sheet Description The ADNS-6170-002 laser mouse wide trim lens is designed for use with Avago Technologies ADNS-7530 or ADNS-7550 integrated molded lead-frame DIP LaserStreamTM sensors. Together with the VCSEL, the ADNS6170-002 wide trim lens provides the directed illumina- Notes: 1. Dimensions in millimeters/inches. 2. Dimensional tolerance: 0.10mm 3. Angular tolerance: 3 4. Maximum flash: 0.20mm 5. ( ) reference dimension Figure 1. ADNS-6170-002 wide trim lens outline drawings and details tion and optical imaging necessary for proper operation of the sensor. ADNS-6170-002 wide trim lens is a precision molded optical component and should be handled with care to avoid scratching of the optical surfaces. Mechanical Assembly Requirements All specifications reference Figure 2, Optical System Assembly Diagram Parameters Symbol Minimum Typical Maximum Units Conditions Distance from Object Surface to Lens Reference Plane A 2.18 2.40 2.62 mm For ADNS-6170-002 with ADNS-7550 and ADNS-7530 sensors Distance from Object Surface to Sensor Pin Reference Plane B mm Sensor Pin Reference Plane must be in contact with Lens Housing Surface 8.35 ADNS-7530 or ADNS-7550 B ADNS-6170-002 A Object Surface Figure 2. Optical system assembly cross-section diagram Figure 3. Avago Technologies logo location Lens Design Optical Performance Specifications All specifications are based on the Mechanical Assembly Requirements. Parameters Symbol Design Wavelength Lens Material* Index of Refraction N Min. Typical Max. 842 1.5693 1.5713 Units Conditions nm 1.5735 = 842 nm *Lens material is polycarbonate. Cyanoacrylate based adhesives should not be used as they will cause lens material deformation. Mounting Instructions for the ADNS-6170-002 Laser Mouse Wide Trim Lens to the Base Plate An STEP or IGES format drawing file with design specifications for laser mouse base plate features is available. These features are useful in maintaining proper positioning and alignment of the ADNS-6170-002 wide trim lens when used with the Avago Technologies ADNS-7530 or ADNS-7550 integrated molded lead-frame DIP LaserStreamTM sensor. This file can be obtained by contacting your local Avago Technologies sales representative. ADNS-6170-002 Wide Trim Lens Customer Supplied Base Plate Figure 4. Illustration of base plate mounting features for ADNS-6170-002 wide trim lens For product information and a complete list of distributors, please go to our web site: www.avagotech.com Avago, Avago Technologies, and the A logo are trademarks of Avago Technologies, Limited in the United States and other countries. Data subject to change. Copyright (c) 2007 Avago Technologies Limited. All rights reserved. AV02-0688EN - January 25, 2008